وظائف مدير البرامج - الإسماعيلية مصر

Operate and monitor freon-based cooling and air conditioning systems. Perform preventive and corrective maintenance on cooling and air conditioning units. Inspect compressors, condensers, evaporators, expansion valves, and air conditioning units. Detect and repair freon leaks and recharge circuits according to technical procedures. Monitor temperatures of refrigeration and freezing rooms and ensure compliance with operating standards. Use measurement tools to check pressures, temperatures, and refrigerant charge levels. Clean and maintain heat exchangers and filters to ensure efficient operation. Record operating readings and maintenance work and report faults to the direct supervisor. Cooperate with mechanical and electrical maintenance teams in performing joint maintenance tasks. Adhere to occupational safety procedures when handling cooling systems and refrigerants and using personal protective equipment. Keep equipment and work tools clean. Perform any other job-related tasks assigned by the direct manager.

Conduct daily inspection rounds to monitor compliance with occupational safety and health procedures. Ensure workers properly use personal protective equipment (PPE). Report hazards and non-compliance cases and follow up on corrective actions. Inspect fire protection equipment and ensure its readiness in coordination with competent authorities. Monitor emergency exits and evacuation routes and ensure they are free of obstructions. Participate in investigations of accidents, injuries, and near-miss incidents, and prepare the necessary reports. Implement safety and health awareness and training programs. Monitor contractors’ work and ensure their compliance with safety requirements. Ensure application of safe work procedures during maintenance, welding, and work at heights and in confined spaces. Monitor work permit procedures for dangerous works as needed. Prepare daily and weekly records and reports related to safety activities. Perform any other job-related tasks assigned by the direct manager. <p><strong>Additional details</strong></p><ul><li>Vacancies: 2</li><li>Shift system: mornings only</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Processing poultry scalding and deboning operations according to approved operating specifications. Preparing different chicken parts (fillets, thighs, breasts, wings, etc.) according to production requirements. Adherence to targeted production rates while maintaining product quality. Reducing waste during scalding operations and achieving the best yield. Using scalding tools and knives correctly and safely. Ensuring product compliance with specifications and informing the supervisor of any non-conformities. Adherence to Standard Operating Procedures (SOPs) and work instructions. Maintaining cleanliness of tools and the operating area according to sanitation and disinfection programs. Commitment to wearing personal protective equipment and occupational health and safety instructions. Collaborating with the team to ensure daily production plan is achieved. Performing any additional tasks related to the nature of the job as assigned by the direct supervisor.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 10</li><li>Shift system: Morning shifts only</li><li>Benefits: Health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Operating and monitoring the readiness of boilers according to approved operating procedures. Monitor steam pressure, temperature, and water level to ensure safe operation. Perform preventive and corrective maintenance on boilers and their accessories. Monitor feed pumps, safety valves, and boiler control systems. Conduct periodic inspections and report any faults, leaks, or reduced efficiency. Monitor boiler water quality and coordinate with specialists to ensure proper chemical treatment. Record daily operating readings and prepare fault and maintenance reports. Collaborate with mechanical and electrical maintenance teams during repair and maintenance work. Adhere to occupational safety instructions and safe boiler operation procedures, and use personal protective equipment. Keep the boiler room and related equipment clean. Perform any other tasks related to the nature of the job assigned by the direct supervisor.

Perform welding and repair works for equipment and metal structures using suitable welding methods (arc welding, MIG, TIG as needed). Manufacture, install and repair supports, platforms, ladders, guardrails, and production line parts. Execute metal cutting, forming, and assembly according to drawings or work instructions. Repair cracks and damages in equipment and metal structures ensuring safe operation. Participate in preventive and corrective maintenance of equipment in coordination with mechanical maintenance teams. Inspect weld quality and ensure compliance with technical specifications. Maintain welding equipment and perform periodic inspections. Adhere to occupational safety procedures during welding, and use personal protective equipment. Keep the work area clean after maintenance work. Report any risks or faults that may affect safe operation. Carry out any other duties related to the nature of the job as assigned by the direct supervisor.

Operate and monitor equipment and production lines according to Standard Operating Procedures (SOPs). Monitor production processes and report any faults or deviations affecting production. Perform adjustments and equipment preparation before and during operation in coordination with the supervisor. Monitor product quality during production stages and ensure compliance with approved specifications. Adhere to the production plan and achieve daily targets. Reduce waste and scrap during operation and improve material use efficiency. Coordinate with maintenance teams when faults occur to ensure quick restart. Comply with food safety requirements and Good Manufacturing Practices (GMP) and cleaning and sanitation procedures. Adhere to wearing personal protective equipment and occupational health and safety instructions. Record operation and production data and prepare required reports. Maintain cleanliness of equipment and the work area. Perform any other tasks related to the job as assigned by the direct supervisor. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 5</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social security, transportation allowance, meals, housing, overtime</li></ul>

Perform preventive and corrective maintenance on mechanical equipment and machines at the slaughterhouse according to the approved maintenance plan. Diagnose mechanical faults and participate in repairs to ensure rapid resumption of equipment operation. Execute disassembly, assembly, and replacement of damaged parts for mechanical equipment and systems. Monitor the technical condition of equipment and report any faults or observations that may affect operating efficiency. Participate in maintenance work on slaughter lines, conveyors, cutting machinery, and internal transport systems. Perform maintenance on pumps, bearings, gearboxes, and power transmission systems. Collaborate with the electrical maintenance team to carry out joint maintenance tasks when needed. Keep maintenance equipment, tools, and the work area clean. Adhere to occupational safety procedures and use personal protective equipment during maintenance work. Record maintenance performed and inform the engineer or supervisor of the work results. Perform any other related tasks as assigned by the direct supervisor. <p><strong>Additional Details</strong></p><ul><li>Vacancies: 5</li><li>Shift system: Morning shifts only</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Carrying out preventive and corrective maintenance for all electrical equipment and systems in the slaughterhouse according to the approved maintenance plan. Diagnosing electrical faults and repairing them to ensure quick restart of equipment. Performing maintenance on electrical distribution panels, motors, generators, and lighting systems. Performing wiring, disconnection, and replacement of faulty electrical components. Monitoring the technical condition of electrical equipment and reporting any faults or notes that may affect operation. Contributing to the maintenance of electrical control systems and programmable logic controllers (PLC) under the supervision of the competent engineer. Using electrical measuring instruments to ensure the safety of circuits and electrical components. Collaborating with the mechanical maintenance team during joint maintenance tasks. Keeping tools, maintenance equipment, and the workplace clean. Adhering to occupational safety procedures when dealing with electrical equipment and using personal protective equipment. Recording maintenance work performed and informing the engineer or direct supervisor of the results. Executing any other tasks related to the nature of the job as assigned by the direct manager.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 4</li><li>Shift system: Morning shift only</li><li>Benefits: health insurance, social security, transportation allowance, meals, housing, overtime</li></ul>

Execution of installation, maintenance, and repair works for water and sanitation networks inside the slaughterhouse. Maintenance and repair of hot and cold water lines, steam lines, condensates, and compressed air lines when needed. Installation and replacement of pipes, valves, connections, gates, pumps and their accessories. Detecting and repairing leaks and blockages to ensure continuous operation. Implementing preventive and corrective maintenance works for plumbing systems according to the approved maintenance plan. Monitoring the efficiency of drainage networks and ensuring there are no leaks that may affect operation safety or food safety. Cooperating with mechanical and electrical maintenance teams during joint maintenance works. Using the appropriate tools and keeping them maintained. Compliance with occupational health and safety procedures and use of personal protective equipment. Maintaining cleanliness of the work area after maintenance completion. Preparing reports on faults and performed maintenance and submitting them to the direct supervisor. Executing any other tasks related to the nature of the job as assigned by the direct manager.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: mornings only</li><li>Benefits: health insurance, social security, transportation allowance, meals, housing, overtime</li></ul>

About the Role:We are looking for a Process Engineer in Textile factory to drive efficiency and continuous improvement across our textile operations. This role focuses on optimizing production processes, improving machinery performance, automating KPIs, and supporting cross-functional projects to ensure high-quality output and operational excellence.<br>What You’ll Do:Maintain Health & Safety standards and good housekeeping. Monitor employee performance, attendance, and training. Develop, track, and improve KPIs such as efficiency, cycle times, cost per unit, and resource usage. Reduce machine and equipment downtime; enhance effectiveness and implement process improvements. Collaborate with all departments to solve cross-functional challenges. Support IT initiatives to automate processes and improve system efficiency. Assist managers with complex projects, audits, new machine setups, and standardization of process times.<br>What We’re Looking For:Diploma or Bachelor’s in Textile Engineering3:7 years in textile manufacturing is must Machine troubleshooting and maintenance ERP reporting Lean / 5S methodologies Quality standards awareness (ISO, SOPs). Proficiency in English

About the Role:We are looking for a Process Engineer in Textile factory to drive efficiency and continuous improvement across our textile operations. This role focuses on optimizing production processes, improving machinery performance, automating KPIs, and supporting cross-functional projects to ensure high-quality output and operational excellence.<br>What You’ll Do:Maintain Health & Safety standards and good housekeeping. Monitor employee performance, attendance, and training. Develop, track, and improve KPIs such as efficiency, cycle times, cost per unit, and resource usage. Reduce machine and equipment downtime; enhance effectiveness and implement process improvements. Collaborate with all departments to solve cross-functional challenges. Support IT initiatives to automate processes and improve system efficiency. Assist managers with complex projects, audits, new machine setups, and standardization of process times.<br>What We’re Looking For:Diploma or Bachelor’s in Textile Engineering3:7 years in textile manufacturing is must Machine troubleshooting and maintenance ERP reporting Lean / 5S methodologies Quality standards awareness (ISO, SOPs). Proficiency in English

Company Description Fly Akeed is a corporate travel platform that streamlines business travel through an intelligent system covering requests, policy-based approvals, bookings, trip changes, and expense reconciliation. Founded in Riyadh in 2015, it provides travelers with a self-service app offering global flight and hotel inventory, corporate fares, and responsive support when plans change. Travel managers benefit from automated approval workflows, tailored policy controls, consolidated invoicing, and live dashboards that turn travel spend into actionable insights, while finance teams gain visibility and accuracy. The company integrates onboarding into its product, guiding policy setup, employee data, platform activation, and ongoing support so teams can go live quickly. Fly Akeed operates from Riyadh with research and development in the Philippines and is committed to growing regional talent as part of the broader Vision 2030 travel and tourism ecosystem.<br>Role Description The Writer at Fly Akeed will create clear, engaging content that supports product communication, marketing initiatives, and internal documentation. This full-time, on-site role in Ismailia involves drafting and editing website copy, app content, product descriptions, blog posts, social media copy, and customer-facing help materials. The Writer will collaborate with product, marketing, and operations teams to translate complex travel and platform features into accessible language that aligns with brand tone and objectives. Daily tasks include researching travel and technology topics, interviewing subject matter experts, refining content based on feedback and analytics, and ensuring consistency across all communication channels. The role also involves maintaining style guides, meeting project deadlines, and contributing ideas to improve content strategy and user experience.<br>Qualifications<br> Strong writing, editing, and proofreading skills, with the ability to produce clear, concise, and engaging content for digital platforms. Experience in web content writing and creating product or app-related copy, preferably for technology or travel services. Ability to conduct structured research and transform complex information into user-friendly content for diverse audiences. Familiarity with content strategy, SEO principles, and basic digital marketing concepts is an advantage. Excellent command of written and spoken English; Arabic proficiency is a plus. Strong attention to detail, organization, and time management skills, with the ability to handle multiple projects simultaneously. Comfort working on-site in a collaborative environment in Ismailia and coordinating with distributed teams. Bachelor’s degree in Communications, Journalism, Marketing, Linguistics, or a related field, or equivalent practical experience. Interest in corporate travel, technology platforms, and improving the business traveler experience.