وظائف مهندس تفتيش هندسي - أسيوط مصر

Job Description: Mechanical Engineer – Thermal Insulation & Cladding<br>Experience Required: Minimum 10 years Location: Asyut Working days: 6 Days Working Hours: 8 Hours<br>Job Summary<br>The Mechanical Engineer – Thermal Insulation & Cladding is responsible for the engineering, planning, execution, inspection, and technical supervision of thermal insulation and protective cladding works across heavy industrial projects.<br>The role covers hot insulation systems for piping, equipment, tanks, vessels, boilers, ducts, and other industrial assets. The engineer will ensure that insulation and cladding works comply with project specifications, approved drawings, applicable standards, quality requirements, safety procedures, budgets, and project schedules.<br>key Responsibilities<br>Engineering and Technical Responsibilities:<br>* Review project specifications, drawings, piping isometrics, equipment layouts, data sheets, insulation schedules, and bills of quantities.* Select appropriate insulation systems based on operating temperature, process conditions, environmental exposure, energy-conservation requirements, and fire and safety considerations.* Prepare and review insulation and cladding specifications, material take-offs, technical submittals, method statements, inspection and test plans, and installation procedures.* Determine the required insulation material, thickness, density, vapor barriers, weatherproofing systems, fastening arrangements, and cladding materials.* Provide technical solutions for hot-service, cold-service, cryogenic, acoustic, anti-condensation, and personnel-protection applications.* Develop insulation details for piping fittings, valves, flanges, supports, vessels, tanks, ducts, boilers, turbines, and other industrial equipment.* Review vendor and subcontractor technical offers and verify compliance with project specifications.* Support cost estimation, tender preparation, quantity verification, variation orders, and technical-commercial evaluations.* Identify insulation interfaces and potential clashes with piping, structural steel, equipment, electrical systems, and instrumentation.<br>Site Execution and Supervision:<br>* Plan and supervise insulation and cladding activities at construction and operating industrial sites.* Coordinate daily activities with construction teams, subcontractors, planners, QA/QC personnel, HSE teams, and client representatives.* Ensure that surfaces are properly prepared and released before insulation installation.* Verify the correct installation of insulation materials, vapor barriers, sealants, expansion joints, support systems, removable insulation covers, and metal cladding.* Supervise the fabrication and installation of aluminium, stainless-steel, and galvanized-steel cladding.* Monitor workforce productivity, material consumption, work progress, and subcontractor performance.* Resolve technical and site-related problems and provide practical corrective solutions.* Coordinate insulation activities during plant shutdowns, turnarounds, maintenance campaigns, and time-critical projects.* Ensure that completed systems provide continuous insulation and adequate protection against weather, moisture ingress, mechanical damage, and corrosion under insulation.* Prepare progress reports, look-ahead plans, technical queries, site instructions, and completion documentation.<br> Quality and Inspection<br>* Inspect insulation and cladding works in accordance with approved drawings, specifications, method statements, and inspection plans.* Verify material certificates, approved manufacturers, batch information, storage conditions, and material traceability.* Conduct inspections covering insulation thickness, density, joint arrangement, fastening, sealing, vapor-barrier continuity, cladding overlap, water shedding, and workmanship.* Identify non-conformities, recommend corrective actions, and follow up until final closure.* Participate in client inspections, system handovers, punch-list clearance, and final acceptance.* Support investigations and preventive actions related to moisture ingress, insulation deterioration, heat loss, condensation, and corrosion under insulation.* Maintain inspection records, material reports, red-line drawings, and final project dossiers.<br>Health, Safety, and Environmental Responsibilities<br>* Ensure all activities comply with project HSE requirements and applicable site procedures.* Conduct or participate in risk assessments, job safety analyses, toolbox talks, and permit-to-work activities.* Promote safe practices for working at height, scaffolding access, confined spaces, hot surfaces, sharp metal cladding, and insulation-material handling.* Ensure the correct use of personal protective equipment and proper housekeeping within work areas.<br>Required Qualifications<br>* Bachelor’s degree in Mechanical Engineering from a recognized university.* Minimum 10 years of relevant experience in thermal insulation and industrial cladding.* Proven experience on heavy industrial projects such as power plants, refineries, petrochemical facilities, oil and gas plants, cement plants, fertilizer plants, steel plants, LNG facilities, or large process-industry projects.* Strong practical knowledge of insulation systems for piping, tanks, vessels, boilers, ducts, turbines, heat exchangers, and industrial equipment.* Demonstrated experience in both engineering review and site execution.* Experience managing insulation subcontractors, supervisors, foremen, technicians, and skilled workers.* Strong understanding of corrosion under insulation and moisture-prevention requirements.* Experience working on shutdowns, plant maintenance, or brownfield projects is highly preferred.* Good command of written and spoken English. Knowledge of Arabic or another project-relevant language is an advantage.<br> Required Technical Knowledge<br>The successful candidate should have practical knowledge of:<br>* Hot insulation systems.* Mineral wool, rock wool, glass wool, calcium silicate, cellular glass, perlite, aerogel, elastomeric foam, PIR, PUR, and ceramic-fibre insulation.* Aluminium, stainless-steel, and galvanized-steel cladding systems.* Vapor barriers, weather barriers, mastics, sealants, membranes, fastening systems, support rings, and expansion joints.* Removable and reusable insulation covers for valves, flanges, turbines, and equipment requiring maintenance access.* Insulation thickness calculations, heat-loss control, surface-temperature control, and condensation prevention.* Material take-offs, quantity surveying, cost estimation, productivity calculations, and project planning.* Reading piping isometrics, general arrangement drawings, P&IDs, equipment drawings, and insulation schedules.* Relevant international standards and industry practices, including ISO, ASTM, BS, EN, CINI, NORSOK, or equivalent project-specific requirements.* Inspection procedures, non-conformance reporting, punch-list management, and project handover requirements.<br>Software Skills<br>* Advanced proficiency in Microsoft Excel and Microsoft Office.* Good working knowledge of Auto CAD.* Ability to review 3D models using Navisworks or similar software is preferred.* Experience with Primavera P6 or Microsoft Project is an advantage.* Familiarity with thermal-insulation calculation or heat-transfer software is preferred.<br>Core Competencies<br>* Strong technical judgment and practical problem-solving ability.* Leadership and supervision of multidisciplinary and subcontractor teams.* Excellent planning, coordination, and progress-monitoring skills.* Strong attention to detail and commitment to quality.* Ability to work effectively under shutdown and project schedule pressure.* Commercial awareness and cost-control capability.* Clear technical reporting and stakeholder communication.* Ability to coordinate effectively with clients, consultants, vendors, and site teams.<br>Preferred Certifications<br>* Relevant QA/QC or industrial insulation inspection certification.* Project management or planning certification.* NEBOSH, IOSH, OSHA, or equivalent safety training.* Manufacturer training related to industrial insulation and cladding systems.

Job Description: Mechanical Engineer – Thermal Insulation & Cladding<br>Experience Required: Minimum 10 years in Mechanical construction, up to 5 years in Insulation Location: Asyut Working days: 6 Days Working Hours: 8 Hours<br>Job Summary<br>The Mechanical Engineer – Thermal Insulation & Cladding is responsible for the engineering, planning, execution, inspection, and technical supervision of thermal insulation and protective cladding works across heavy industrial projects.<br>The role covers hot insulation systems for piping, equipment, tanks, vessels, boilers, ducts, and other industrial assets. The engineer will ensure that insulation and cladding works comply with project specifications, approved drawings, applicable standards, quality requirements, safety procedures, budgets, and project schedules.<br>key Responsibilities<br>Engineering and Technical Responsibilities:<br>* Review project specifications, drawings, piping isometrics, equipment layouts, data sheets, insulation schedules, and bills of quantities.* Select appropriate insulation systems based on operating temperature, process conditions, environmental exposure, energy-conservation requirements, and fire and safety considerations.* Prepare and review insulation and cladding specifications, material take-offs, technical submittals, method statements, inspection and test plans, and installation procedures.* Determine the required insulation material, thickness, density, vapor barriers, weatherproofing systems, fastening arrangements, and cladding materials.* Provide technical solutions for hot-service, cold-service, cryogenic, acoustic, anti-condensation, and personnel-protection applications.* Develop insulation details for piping fittings, valves, flanges, supports, vessels, tanks, ducts, boilers, turbines, and other industrial equipment.* Review vendor and subcontractor technical offers and verify compliance with project specifications.* Support cost estimation, tender preparation, quantity verification, variation orders, and technical-commercial evaluations.* Identify insulation interfaces and potential clashes with piping, structural steel, equipment, electrical systems, and instrumentation.<br>Site Execution and Supervision:<br>* Plan and supervise insulation and cladding activities at construction and operating industrial sites.* Coordinate daily activities with construction teams, subcontractors, planners, QA/QC personnel, HSE teams, and client representatives.* Ensure that surfaces are properly prepared and released before insulation installation.* Verify the correct installation of insulation materials, vapor barriers, sealants, expansion joints, support systems, removable insulation covers, and metal cladding.* Supervise the fabrication and installation of aluminium, stainless-steel, and galvanized-steel cladding.* Monitor workforce productivity, material consumption, work progress, and subcontractor performance.* Resolve technical and site-related problems and provide practical corrective solutions.* Coordinate insulation activities during plant shutdowns, turnarounds, maintenance campaigns, and time-critical projects.* Ensure that completed systems provide continuous insulation and adequate protection against weather, moisture ingress, mechanical damage, and corrosion under insulation.* Prepare progress reports, look-ahead plans, technical queries, site instructions, and completion documentation.<br> Quality and Inspection<br>* Inspect insulation and cladding works in accordance with approved drawings, specifications, method statements, and inspection plans.* Verify material certificates, approved manufacturers, batch information, storage conditions, and material traceability.* Conduct inspections covering insulation thickness, density, joint arrangement, fastening, sealing, vapor-barrier continuity, cladding overlap, water shedding, and workmanship.* Identify non-conformities, recommend corrective actions, and follow up until final closure.* Participate in client inspections, system handovers, punch-list clearance, and final acceptance.* Support investigations and preventive actions related to moisture ingress, insulation deterioration, heat loss, condensation, and corrosion under insulation.* Maintain inspection records, material reports, red-line drawings, and final project dossiers.<br>Health, Safety, and Environmental Responsibilities<br>* Ensure all activities comply with project HSE requirements and applicable site procedures.* Conduct or participate in risk assessments, job safety analyses, toolbox talks, and permit-to-work activities.* Promote safe practices for working at height, scaffolding access, confined spaces, hot surfaces, sharp metal cladding, and insulation-material handling.* Ensure the correct use of personal protective equipment and proper housekeeping within work areas.<br>Required Qualifications<br>* Bachelor’s degree in Mechanical Engineering from a recognized university.* Minimum 10 years of relevant experience in thermal insulation and industrial cladding.* Proven experience on heavy industrial projects such as power plants, refineries, petrochemical facilities, oil and gas plants, cement plants, fertilizer plants, steel plants, LNG facilities, or large process-industry projects.* Strong practical knowledge of insulation systems for piping, tanks, vessels, boilers, ducts, turbines, heat exchangers, and industrial equipment.* Demonstrated experience in both engineering review and site execution.* Experience managing insulation subcontractors, supervisors, foremen, technicians, and skilled workers.* Strong understanding of corrosion under insulation and moisture-prevention requirements.* Experience working on shutdowns, plant maintenance, or brownfield projects is highly preferred.* Good command of written and spoken English. Knowledge of Arabic or another project-relevant language is an advantage.<br> Required Technical Knowledge<br>The successful candidate should have practical knowledge of:<br>* Hot insulation systems.* Mineral wool, rock wool, glass wool, calcium silicate, cellular glass, perlite, aerogel, elastomeric foam, PIR, PUR, and ceramic-fibre insulation.* Aluminium, stainless-steel, and galvanized-steel cladding systems.* Vapor barriers, weather barriers, mastics, sealants, membranes, fastening systems, support rings, and expansion joints.* Removable and reusable insulation covers for valves, flanges, turbines, and equipment requiring maintenance access.* Insulation thickness calculations, heat-loss control, surface-temperature control, and condensation prevention.* Material take-offs, quantity surveying, cost estimation, productivity calculations, and project planning.* Reading piping isometrics, general arrangement drawings, P&IDs, equipment drawings, and insulation schedules.* Relevant international standards and industry practices, including ISO, ASTM, BS, EN, CINI, NORSOK, or equivalent project-specific requirements.* Inspection procedures, non-conformance reporting, punch-list management, and project handover requirements.<br>Software Skills<br>* Advanced proficiency in Microsoft Excel and Microsoft Office.* Good working knowledge of Auto CAD.* Ability to review 3D models using Navisworks or similar software is preferred.* Experience with Primavera P6 or Microsoft Project is an advantage.* Familiarity with thermal-insulation calculation or heat-transfer software is preferred.<br>Core Competencies<br>* Strong technical judgment and practical problem-solving ability.* Leadership and supervision of multidisciplinary and subcontractor teams.* Excellent planning, coordination, and progress-monitoring skills.* Strong attention to detail and commitment to quality.* Ability to work effectively under shutdown and project schedule pressure.* Commercial awareness and cost-control capability.* Clear technical reporting and stakeholder communication.* Ability to coordinate effectively with clients, consultants, vendors, and site teams.<br>Preferred Certifications<br>* Relevant QA/QC or industrial insulation inspection certification.* Project management or planning certification.* NEBOSH, IOSH, OSHA, or equivalent safety training.* Manufacturer training related to industrial insulation and cladding systems.

Company Description El Haggar Misr is a leading company in the air compressors business, established in 1977 and recognized as a trusted choice for compressed air solutions in Egypt. The company offers a wide range of products, including reciprocating compressors manufactured in cooperation with Rami in Italy, supporting businesses of various sizes. El Haggar Misr is the sole agent for Kaeser screw compressors and Camozzi pneumatic systems, backed by highly trained engineers and an authorized service center. The organization continues to expand its portfolio with advanced solutions such as high-quality Italian nitrogen generators, providing up to 99.9% pure nitrogen to meet evolving customer needs.???????????? ????????????????????????????????????????????????????????????????Sell and promote air compressors, air dryers, and related systems to industrial and commercial clients. Analyze customer technical requirements and recommend suitable solutions. Prepare technical proposals, quotations, and commercial offers. Deliver product presentations and technical discussions with customers. Manage the sales process from lead generation to deal closing. Coordinate with internal teams (technical, service, and operations) to ensure successful delivery. Build and maintain strong client relationships and expand market presence. Prepare regular sales reports and market updates.???????????????????????????????????????????????????????? & ????????????????????????????????????????????????:✔️ Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field✔️ Fresh graduates are welcome to apply✔️ Experience in selling air compressors and compressed air systems is an advantage✔️ Strong technical knowledge of air dryers and industrial equipment✔️ Valid driving license is required✔️ Willingness to conduct field visits and customer meetings✔️ Excellent communication, negotiation, and presentation skills✔️ Ability to work independently and achieve sales targets✔️ Applicants must be residents of the same required hiring locations

Company Description ECB is a fast-growing engineering and consultancy firm established in 1997, offering multidisciplinary services across diverse sectors. The firm combines in-depth knowledge of Egypt’s market with broad international exposure to deliver client-focused solutions. ECB is recognized for its strong track record in the consultancy industry and its commitment to quality and efficiency. Its management systems for design, site supervision, and project management comply with ISO 9001:2015 requirements, reflecting a structured and reliable approach to projects.<br>Role Description The Senior Project Coordinator is a full-time, on-site role based in Asyut, Egypt. This role is responsible for coordinating project activities, ensuring timely execution of tasks, and supporting overall project delivery in alignment with ECB’s standards. Daily responsibilities include tracking project schedules, managing documentation, liaising with internal teams and external stakeholders, and monitoring progress against milestones. The Senior Project Coordinator will also support expediting processes, follow up on inspections, oversee logistics-related tasks, and help resolve operational issues. The role requires proactive communication, attention to detail, and consistent reporting to project leadership.<br>Qualifications<br> Candidates should possess skills in Expediting and experience working as an Expeditor to ensure materials and services are delivered on time. Candidates should possess Project Management skills, including planning, coordination, and monitoring of project activities. Candidates should possess Inspection-related skills to follow up on quality checks and compliance with project specifications. Candidates should possess Logistics Management skills to coordinate the movement and delivery of materials and resources. Bachelor’s degree in Engineering, Construction Management, or a related field. Proven experience in project coordination within engineering, construction, or consultancy environments. Strong organizational, analytical, and problem-solving abilities, with effective written and verbal communication skills. Ability to work collaboratively with multidisciplinary teams and stakeholders in an on-site setting. Proficiency in project management tools and Microsoft Office applications. Knowledge of quality management standards and familiarity with ISO-based systems is an advantage.

<p><strong>Handle sales, service and maintenance in Upper Egypt area</strong><br><br><strong>Sales:</strong></p><ul><li><p>Represent the company’s products and services.</p></li><li><p>Generating leads, contacting potential customers and building relationships to increase sales</p></li><li><p>Maintain working relationships with existing clients to ensure that they receive exceptional service and to identify potential new sales opportunities</p></li><li><p>Identify prospects, set appointments, make effective qualifying sales calls, and manage sales cycle to close new business in all service categories</p></li><li><p>Possess in-depth product knowledge and be able to conduct demos and handle objections</p></li><li><p>Prepare concise and accurate reports, proposals, booking packages, and other required documentation for executive-level presentations</p></li><li><p>Achieve sales goals by assessing current client needs and following a defined selling process with potential buyers, often including product demos and presentations</p></li><li><p>Coordinate with other sales representatives to ensure that quotas are being met and company standards are being upheld</p></li></ul><p>&nbsp;</p><p><strong>Requirements</strong></p><ul><li><p>Biomedical Engineer is must</p></li><li><p>Male / Female</p></li><li><p>Ability to cover Upper Egypt areas, starting from Al Minya to Aswan</p></li><li><p>Biomedical engineers - Physiotherapists </p></li><li><p>at least 3 years experience</p></li></ul><p></p>

<p>Job Description</p><ul><li><p>Job Summary The Senior Sales Engineer will be responsible for promoting and selling the company's CSSD &amp; Sterilization portfolio across Upper Egypt, developing new business opportunities, and maintaining strong relationships with hospitals and healthcare providers.</p></li></ul><p>Responsibilities</p><ol><li><p>Promote and sell CSSD &amp; Sterilization equipment to hospitals and healthcare facilities.</p></li><li><p>Develop new business opportunities and expand the customer base across Upper Egypt.</p></li><li><p>Conduct product presentations, demonstrations, and technical discussions.</p></li><li><p>Prepare quotations and negotiate commercial offers.</p></li><li><p>Follow up on sales opportunities until closing.</p></li><li><p>Build and maintain strong relationships with key decision-makers.</p></li><li><p>Coordinate with the application and service teams to ensure customer satisfaction.</p></li><li><p>Participate in conferences, workshops, and exhibitions.</p></li><li><p>Monitor market trends and competitor activities.</p></li><li><p>Prepare regular sales forecasts and activity reports.</p></li><li><p>Achieve assigned sales targets.</p></li></ol><p></p><p><strong>Requirements</strong></p><p></p><ul><li><p>Bachelor's degree in Biomedical Engineering, Pharmacy, Science, or a related field.</p></li><li><p>5–8 years of experience in CSSD &amp; Sterilization medical equipment sales.</p></li><li><p>Hands-on experience with one or more of the following products:</p></li></ul><ol><li><p>Steam Sterilizers (Autoclaves)</p></li><li><p>Hydrogen Peroxide Plasma Sterilizers</p></li><li><p>Washer Disinfectors</p></li><li><p>Ultrasonic Cleaners</p></li><li><p>CSSD Workstations</p></li><li><p>Packing &amp; Sealing Machines</p></li><li><p>Sterilization Containers &amp; Accessories</p></li></ol><p></p><ul><li><p>Strong understanding of CSSD workflow and sterilization standards.</p></li><li><p>Excellent communication, presentation, and negotiation skills.</p></li><li><p>Strong business development and key account management skills.</p></li><li><p>Ability to travel extensively across Upper Egypt.</p></li><li><p>Own a car with a valid driving license (Mandatory).</p></li><li><p>Must be a resident of <strong>Upper Egypt</strong>.</p></li><li><p>Good command of English.</p></li><li><p>Proficiency in Microsoft Office.</p></li></ul><p></p>

<ul><li><p>Full respect of company 6 steps standards (from welcoming to hand over of the customer car).</p></li></ul><ul><li><p>Upsell the workshop offers in terms of service, parts and accessories.</p></li></ul><ul><li><p>Ensure technicians are following quality control policy and procedures.</p></li></ul><ul><li><p>Advise customers about necessary service for routine maintenance.</p></li></ul><ul><li><p>Help identify a mechanical problem by questioning the customer or doing a visual inspection or road test.</p></li></ul><ul><li><p>Confer with customers about inspection results, recommend corrective procedures, and prepare work order for needed repairs.</p></li></ul><ul><li><p>Prepare a repair order showing time, cost, and labor estimates for service. Write a brief description of the problem on the repair order to help the mechanic locate the problem</p></li></ul><ul><li><p>Ensure job controllers are feeding correct/proper operation number.</p></li></ul><ul><li><p>Maintain a high level of self-hygiene and respect company uniform.</p></li></ul><ul><li><p>Respect strictly discount policy based on company policy</p></li></ul><ul><li><p>Ensure that repair estimates are reasonable based on company policy and standards, ensure that repairs are carried out within promised delivery time and estimated cost and monitor closely the vehicles repairing.</p></li><li><p>Handle customer’s queries and complaints promptly and effectively</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Position Title:</strong> &nbsp;&nbsp;Service Advisor</p><p><strong>Educational Requirements: </strong>&nbsp;&nbsp;Bachelor Degree in Mechanical Engineering</p><p><strong>Special Certification or Training- Required: </strong>&nbsp;&nbsp;N/A</p><p><strong>Required Industry Experience:</strong> &nbsp;&nbsp;3 years of experience</p><p><strong>Technological Requirements:</strong> &nbsp;Microsoft office suite</p><p><strong>Language Requirements:</strong> Very good command of English</p><p></p>

Company Description ECB is a fast-growing engineering and consultancy firm established in 1997, offering multidisciplinary services across diverse sectors. The firm combines in-depth knowledge of Egypt’s market with broad international exposure to deliver tailored, client-focused solutions. ECB is recognized for its strong track record in design, site supervision, and project management, supported by a robust management system. The company’s processes meet ISO 9001:2015 requirements, reflecting a commitment to quality, consistency, and continuous improvement. Team members join a professional environment that values technical excellence and collaborative problem-solving.<br>Role Description The Design Manager is a full-time, on-site role based in Asyut, Egypt. This role oversees the design process from concept to delivery, ensuring that all engineering and architectural design work meets project requirements, quality standards, and regulatory guidelines. Day-to-day tasks include coordinating multidisciplinary design teams, reviewing and approving design documents, managing design schedules, and resolving technical issues. The Design Manager collaborates closely with project managers, site supervision teams, and clients to align design solutions with project goals and budget constraints. The role also involves mentoring junior designers, implementing design best practices, and contributing to continuous improvement of ECB’s design management system.<br>Qualifications<br> Strong expertise in design management, including leading multidisciplinary design teams and managing design workflows. Proficiency in relevant design and engineering software (e.g., CAD/BIM tools) and familiarity with applicable codes and standards. Demonstrated experience in coordinating with project management and site supervision teams to ensure design feasibility and constructability. Excellent communication, stakeholder management, and collaboration skills to work effectively with clients and internal teams. Solid organizational and time-management abilities, with proven capability to manage multiple projects and meet deadlines. Bachelor’s degree or higher in Engineering, Architecture, or a related discipline; professional certifications are a plus. Experience in consultancy or engineering firms, preferably within the region, and understanding of ISO 9001:2015 quality management principles. Ability to work on-site in Asyut, Egypt, with a commitment to ethical, inclusive, and non-discriminatory professional conduct.