وظائف مهندس ميكانيكا معدات ثقيلة

Required heavy equipment mechanic with experience in mechanics and maintenance of loaders, excavators, and others. Travel between the company’s private work sites at any time. Prefer proximity of residence to the company headquarters in Nasr City. Accommodation available for expatriates at sites.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: Transportation allowance, housing</li></ul>

About the company: Hammers Company is a leading company in the lightweight transport industry, specialized in manufacturing vehicle frames, metal structures, and mechanical systems. We believe in innovation and quality and seek to attract mechanical maintenance engineers and reception staff for the maintenance and customer service department. Tasks and responsibilities: Inspect, maintain, and receive lightweight transport means to ensure high performance and safe maintenance operations. Perform preventive maintenance and repairs according to the warranty protocol at the factory. Work with the technical team to ensure continuous production at high efficiency. Analyze mechanical faults and provide innovative and effective solutions. Manage and maintain vehicles and mechanical equipment. Prepare periodic reports on vehicle status and provide improvement suggestions. Qualifications: Bachelor’s degree in Mechanical Engineering. At least 5 years of experience in machinery and mechanical equipment maintenance. Strong knowledge of maintenance techniques for light or heavy transport equipment. Ability to diagnose faults and provide technical solutions quickly and effectively. Skills in using computer maintenance and technical management software. Ability to work under pressure in a fast-paced work environment. Previous experience with Odoo or similar programs. Benefits: Opportunities for professional training and development. Modern and supportive work environment. Health and social insurance. Additional benefits: Private medical insurance and annual vacations, performance incentives. Preference for residents of Al-Obour City - Cairo - Sharqia - Banha - Ain Shams - Masr El Gedida - Al-Salam, due to bus route. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance, transportation allowance, meals, overtime, motorcycle/scooter required</li></ul>

Maintenance and repair of mechanical systems and equipment to ensure efficient operation and safety. Diagnostics of faults. Preventive maintenance. Replacement of worn parts. Installation of new equipment. Good knowledge of health and safety procedures. 22 working days + 8 days leave. Housing + 3 meals provided. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning only</li><li>Benefits: health insurance, social security, transport allowance, meals, housing, overtime</li></ul>

Implementation and supervision of preventive, predictive, and corrective maintenance programs for mechanical equipment and machines at the slaughterhouse. Monitor the technical condition of the equipment, analyze root causes of failures, and establish corrective actions to prevent recurrence. Supervising maintenance work on slaughter line operations, conveyors, cutting equipment, packaging equipment, and internal transport systems. Monitoring maintenance of mechanical facilities including steam, compressed air, water, industrial wastewater, and fire protection systems. Coordination with Production Management to ensure maintenance work is carried out without affecting the operational plan. Review and approve daily maintenance reports and analyze equipment performance indicators. Monitor availability of critical spare parts and coordinate with Stores and Purchasing Management to meet technical requirements. Participate in installing, commissioning, and technically receiving new equipment. Supervise external contractors during maintenance work and ensure conformity with technical specifications. Ensure adherence to quality, food safety, and occupational health and safety procedures during maintenance work. Prepare periodic reports on equipment faults, maintenance performance, and spare parts consumption, and propose opportunities for continuous improvement. Manage the maintenance team and develop staff through monthly and annual evaluations. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance</li></ul>

Responsibilities: Continuous research and development of equipment and mechanical machinery. Design of mechanical system components, from simple machines to complex systems, which requires strong knowledge of manufacturing materials and their properties, as well as the ability to use appropriate engineering design software. Supervision of all stages of design, development, and installation, while monitoring schedules and costs for project progress according to the drawn plans. Supervision of operation and maintenance of industrial machines, including ensuring systems operate efficiently and preventive maintenance is carried out regularly to minimize unexpected downtime. On-site supervision of installation, operation, and maintenance of equipment (pumps, piping lines, and valves), ensuring conformity to standard specifications. Analysis of the performance of mechanical systems to develop efficiency improvement strategies and identify weaknesses that may affect performance. Preparation of the design for new mechanical parts. Testing equipment and machines after manufacturing stage and ensuring they function properly. Supervision of maintenance operations for mechanical equipment and machines. Providing training and guidance to workers on rates and machines. Continuous research and development and acquiring new skills through participation and attendance at dedicated training courses and workshops. Collaboration with teams and colleagues at work to always achieve desired results. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: health insurance, social security, transportation allowance, meals, housing</li></ul>

Experience of not less than 3 years in the field of mechanical maintenance, preferably in food industries knowledge of maintenance of gearboxes, motors, pneumatic systems, hydraulic systems, alignment work, and root cause analysis of failures. Responsibilities: Leading diagnostic work for mechanical failures and repairing production and packaging equipment, including furnaces, gearboxes, motors, conveyors, pneumatic systems, and HVAC systems. Prepare and implement preventive maintenance plans and programs according to approved schedules. Analyze fault data and Downtime to identify root causes, and propose and implement corrective and preventive actions. Coordinate with the production team to minimize equipment downtime during maintenance. Manage spare parts specifications, participate in supplier selection, and monitor inventory to ensure availability. Support installation of new equipment, alignment adjustment, and participate in initial commissioning. Ensure compliance with safety, health, and occupational standards and procedures during all maintenance work. Supervising maintenance technicians and providing technical support and guidance as needed during work. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: health insurance, social security, transportation allowance, meals, overtime</li></ul>

Site Mechanical Engineer at a company that designs and implements swimming pools and water features (recent graduate – up to two years of experience) Job overview: A company specialized in designing and implementing swimming pools, as part of our project expansions and to increase the workforce, a Site Mechanical Engineer is required to supervise the execution of mechanical works at project sites. Salary: higher salary based on experience. There is social security and medical insurance. Responsibilities: - Follow up on plumbing and piping works for swimming pools - Supervise installation of equipment rooms - Ensure implementation complies with engineering drawings and technical specifications - Conduct pressure and leakage tests for networks - Coordinate with on-site work teams - Prepare daily/weekly reports on site progress - Assist in quantity surveying and materials on site - Coordinate with contractors and technicians Requirements: - Bachelor’s degree in Mechanical Engineering - 1 to 2 years of site experience - Familiarity with reading engineering drawings (Shop Drawings) - Good communication and organizational skills <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning only</li><li>Benefits: health insurance, social security, transportation allowance, meals, housing, overtime</li></ul>

:Responsibilities Design and develop electromechanical systems. Supervise the installation, commissioning, and operation of equipment and systems. Perform preventive and corrective maintenance. Diagnose equipment faults and implement effective solutions. Read and prepare technical drawings and engineering schematics. Monitor project execution and ensure compliance with quality standards and specifications. Coordinate with engineering, production, and maintenance teams. Ensure compliance with health, safety, and environmental (HSE) regulations. Prepare technical reports and maintain maintenance and testing documentation. Improve equipment efficiency and reduce downtime and operating costs. :Requirements Bachelor's degree in Electromechanical Engineering, Mechanical Engineering, or Electrical Engineering. Strong knowledge of electrical, mechanical, and control systems. Ability to read electrical and mechanical drawings and schematics. Proficiency in engineering software such as AutoCAD and SolidWorks (as required). Strong analytical and problem-solving skills. Proficiency in Microsoft Office applications. Good communication and teamwork skills. Ability to work under pressure and manage time effectively. Good command of technical English. Experience with HVAC, Fire Fighting, Plumbing, or industrial production systems is preferred, depending on the company's field. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning shifts only</li><li>Benefits: Social insurance, transportation allowance, overtime</li></ul>

Job title: Heavy Equipment Electrician (Auto Electrician)Work location: Sukari Gold Mine site - Marsa AlamDepartment: Mobile Maintenance DepartmentNumber of vacancies: 3Employment type: National (Egyptian)Work system (shifts): 20 working days / 10 days offObjective of the job: Perform planned (preventive) and unplanned (unexpected faults) electrical maintenance activities during the daily shift safely and efficiently to ensure continuous operation of the fleet of equipment. Key duties and responsibilities: - Perform preventive and corrective electrical maintenance on the fleet of heavy equipment and site vehicles. - Conduct precise, periodic inspections of equipment to detect and identify potential defects and faults early and address them. - Troubleshoot and perform advanced fault-finding on electrical systems of mobile equipment. - Accurately document all official maintenance papers and reports after task completion. - Strict application of risk assessment, safe work procedures, and full compliance with equipment insulation systems and Permit-to-Work within the site. Requirements and qualifications: - Educational qualification: Official certificate or diploma in automotive and equipment electrical field (Auto-Electrical Certificate). - Experience: at least one year of practical experience (after graduation and certification) in the automotive, heavy equipment, or construction sector. - Specific technical experience: Strong understanding and hands-on experience dealing with Caterpillar electrical equipment and systems. - Language skills: Full ability to read and write clearly in Arabic (essential); English proficiency is a strong and preferred plus. Additional details: - Number of vacancies: 6 - Shifts: Morning and evening - Benefits: Health insurance, social security, transportation allowance, meals, housing, overtime

Perform preventive and corrective maintenance on mechanical equipment and machines at the slaughterhouse according to the approved maintenance plan. Diagnose mechanical faults and participate in repairs to ensure rapid resumption of equipment operation. Execute disassembly, assembly, and replacement of damaged parts for mechanical equipment and systems. Monitor the technical condition of equipment and report any faults or observations that may affect operating efficiency. Participate in maintenance work on slaughter lines, conveyors, cutting machinery, and internal transport systems. Perform maintenance on pumps, bearings, gearboxes, and power transmission systems. Collaborate with the electrical maintenance team to carry out joint maintenance tasks when needed. Keep maintenance equipment, tools, and the work area clean. Adhere to occupational safety procedures and use personal protective equipment during maintenance work. Record maintenance performed and inform the engineer or supervisor of the work results. Perform any other related tasks as assigned by the direct supervisor. <p><strong>Additional Details</strong></p><ul><li>Vacancies: 5</li><li>Shift system: Morning shifts only</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

. Qualifications and required experience: Educational qualification: Bachelor's degree in Mechanical Engineering, or Electrical, or Mechatronics. Practical experience: typically between 3 to 8 years; preferably experience in industrial gases or petrochemicals. Thorough knowledge of compressors systems, cooling towers, control valves, and static and rotating equipment. Duties and responsibilities: Scheduling maintenance: prepare and implement preventive and corrective maintenance plans to reduce unplanned downtime. Occupational safety and health management. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Job responsibilities: Design and development of machinery and industrial equipment using SolidWorks and FloidSim. Prepare execution drawings and manufacturing/assembly drawings. Prepare and update Bills of Materials (BOM). Perform engineering calculations and select suitable mechanical components. Support production and assembly departments in solving technical problems. Review and improve existing designs to facilitate manufacturing and reduce cost. Coordinate with production, purchasing, quality, and planning departments. Prepare engineering alterations and maintain updated technical documentation. Participate in testing and commissioning of machines and performance improvement. Qualifications: Bachelor’s in Mechanical Engineering. 3 to 7 years’ hands-on experience in machine or industrial equipment design. Proficiency in SolidWorks and AutoCAD. Ability to read and prepare engineering drawings. Good knowledge of manufacturing processes, operation, welding, and assembly. Good knowledge of hydraulic systems and mechanical components. Proficiency in Microsoft Office. Good command of English. Preference for those with experience in: Hydraulic press design. Hydraulic cylinder design. Special Purpose Machines (SPMs). Metal structures and welding. ERP systems such as SAP Business One. Skills: Analytical thinking and problem-solving. Accuracy and attention to detail. Ability to work in a team. Time management and punctuality. Ability to work under pressure. Willingness to learn and continuous development. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: Social insurance, overtime</li></ul>

Join the Arafa for Agricultural Development and Reclamation team<br>In light of Arafa's continuous expansion in the fields of agricultural reclamation and sustainable development, and our leadership in modern agricultural projects, we are announcing an opening for employment to join our effective team at the Farafra farm.<br>We are looking for ambitious talents and skills to fill the following positions: Required positions: 2 Electrical Engineers with 2 years of experience, 3 Mechanical Engineers (experienced in handling agricultural equipment), 2 Solar Energy Engineers. Work location: Farafra Farm, New Valley. Benefits and perks: Rewarding salaries and allowances. Full board and lodging provided for expatriates. How to apply: For those interested in joining, please send your updated CV to the email, mentioning the required job in the subject line to the following email: <br>m.arafa@arafatrade.com

Job responsibilities: design and develop machines and industrial equipment using SolidWorks. Prepare execution drawings and manufacturing and assembly drawings. Perform engineering calculations and select suitable mechanical components. Support production and assembly departments in solving technical problems. Review and improve current designs to facilitate manufacturing and reduce cost. Coordinate with production, purchasing, quality, and planning departments. Prepare engineering changes and maintain up-to-date technical documents. Participate in testing and operating machines and improving performance. Qualifications: Bachelor's degree in Mechanical Engineering. 3-5 years of hands-on experience in machine or industrial equipment design. Proficiency in SolidWorks and Floid Sim. Proficiency in reading and preparing engineering drawings. Good knowledge of manufacturing, operation, welding, and assembly processes. Good knowledge of hydraulic systems and mechanical components. Proficiency in Microsoft Office. Good level of English. Preference for those with experience in hydraulic presses design. Design of hydraulic cylinders. Special Purpose Machines (SPMs). Metal structures and welding. ERP systems such as SAP Business One. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning only</li><li>Benefits: social security</li></ul>

Job Title: After Sales Engineer. About the Job: We are looking for an outstanding female engineer to join our team as an After Sales Engineer. You will be responsible for providing technical support and sales solutions to our clients, as well as receiving, analyzing, and responding to all inquiries, warranty complaints, and maintenance requests. You will also work closely with the department team and train them to achieve the company's strategy, with a focus on welding machines and cutting machines. Duties and Responsibilities: Inspecting equipment and devices ready for delivery before handing them over to customers. Preparing routine technical reports. Coordinating with the sales team to schedule equipment delivery to customers. Assisting the team in preparing all required documents for the delivery process. Reviewing financial settlements with the finance department before finalizing delivery. Following up on modification requests and customer feedback. Receiving, analyzing, and responding to customer requests, inquiries, warranty claims, and maintenance clarifications. Preparing and following up on technical and commercial offers for spare parts, maintenance contracts, and product repairs. Training the department team and working with them effectively to achieve company goals. Building and developing excellent relationships with all partners and stakeholders. Adhering to the company's archiving and filing system. Required Qualifications: Bachelor's degree in Engineering (Mechatronics, Electrical, Mechanical, Communications) or a related field. At least two years of experience in a similar field. Proficiency in Microsoft Office programs. Ability to work independently or as part of a team. Ability to build good and fast professional relationships with others. Excellent communication and problem-solving skills. Residency near the Sheikh Zayed or 6th of October areas is required.

Job Description:- Supervising and carrying out electromechanical works on projects, including electrical and mechanical systems, ensuring works are implemented according to the approved technical specifications, timelines, and quality and safety standards. Responsibilities:- Supervising the execution of electromechanical works on site according to the approved drawings and specifications.- Reviewing the execution drawings and technical drawings (Shop Drawings).- Coordinating between electrical, mechanical, and civil works to avoid clashes during execution.- Monitoring low and medium voltage electrical systems works.- Supervising HVAC (Heating, Ventilation, and Air Conditioning) works.- Monitoring Fire Fighting Systems works.- Supervising plumbing and sanitary systems.- Reviewing and approving materials and equipment used in the project.- Supervising contractors and suppliers and ensuring compliance with specifications and timelines.- Participating in testing and commissioning activities. Qualifications:- Bachelor's degree in Engineering (Electrical Power, Mechanical, or Mechatronics Engineering).- Hands-on experience in performing and managing electromechanical works.- Proficient in reading drawings and technical blueprints.- Good knowledge of local and international engineering codes and standards.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning shifts only</li><li>Benefits: Social security, overtime</li></ul>

Job Purpose: The Mechanical Works Supervisor is responsible for supervising and coordinating all mechanical works activities on site to ensure the works are carried out safely, according to the specified schedule, and in accordance with the project specifications, quality standards, and approved drawings. The role includes managing workforce productivity, monitoring progress, resolving site issues, and ensuring compliance with safety and quality procedures. Main responsibilities: Supervise and manage daily mechanical works including: air conditioning and ventilation (HVAC), sanitary and plumbing, fire protection, and mechanical feed and drainage works. Ensure all works are performed in accordance with the approved drawings, project specifications, method statements, and QA/QC requirements. Coordinate with site engineers, subcontractors, and foremen to ensure smooth workflow and timely task completion. Monitor labor distribution, equipment usage, and material availability to ensure site operations efficiency. Conduct regular site inspections to monitor progress, verify quality, and ensure safety requirements are met. Field problem-solving and handling technical challenges and any conflicts between mechanical, civil, or electrical systems to avoid implementation delays. Ensure strict compliance with Health, Safety and Environment (HSE) regulations and implement safety procedures for all workers on site. Prepare and submit daily progress reports to site management. Contribute to planning site activities, sequencing works, and identifying risks or potential delays. Review and track quantities of work performed for invoicing, material requests, and project documentation. Monitor testing and commissioning of mechanical systems before handover. Qualifications, experience, knowledge, and skills: Diploma or Bachelor's degree in Mechanical Engineering or related field (preferred). At least 3 years of experience supervising mechanical construction works. Strong knowledge of mechanical and sanitary systems and on-site execution standards. Proficiency in reading engineering drawings and mechanical plans, and in material and equipment specifications. Leadership and good communication skills, with ability to problem-solve. Ability to work under pressure and manage multiple tasks on site. Good understanding of safety systems and quality control procedures.<p><strong>Additional Details</strong></p><ul><li>Vacancies: 1</li><li>Shift System: Morning only</li><li>Benefits: Health insurance, social security, transportation allowance</li></ul>

<p>Need a mechanical engineer with experience in 5-axis CNC machines&nbsp;</p>

<p>Maintenance engineer required, graduate of a mechanical engineering department </p><p>At least 3 years of experience, preferably with experience in the field of compressors and industrial equipment</p><p>Age from 25 to 45 years</p>