وظائف مهندس مواد

Company Description Engineering Integrated Systems (EIS) was established in 2020 to expand its capabilities into general contracting activities. The company is classified in Egypt by the Egyptian Federation of Construction and Building Contractors, reflecting its compliance with national standards and regulations. Since its founding, EIS has built a strong reputation for quality performance and efficiency in successfully completing projects across various contracting fields. EIS has acted as a main contractor in multiple construction areas and is actively seeking to partner with new clients on large-scale projects in Egypt and beyond.<br>Role Description This is a full-time, on-site Senior Electrical Engineer role based in Cairo, Egypt. The Senior Electrical Engineer will lead the electrical design, review, and coordination of power systems and power distribution for building and infrastructure projects. Responsibilities include preparing and validating electrical drawings and calculations, selecting equipment and materials, and ensuring compliance with local codes, international standards, and client specifications. The role involves collaborating closely with project managers, civil and mechanical teams, and external stakeholders to resolve technical issues and maintain project schedules and budgets. The Senior Electrical Engineer will also support site supervision, review contractor submittals, participate in inspections and testing, and contribute to continuous improvement of engineering processes and standards.<br>Qualifications<br> Strong proficiency in Electrical Design and Electrical Engineering, including the ability to develop and review detailed drawings, schematics, and technical documentation. Solid understanding of Electricity principles and applications within building and infrastructure projects. Demonstrated experience in Power Distribution systems, including low- and medium-voltage networks and panelboard design. Expertise in Power Systems analysis, protection, and coordination, using relevant software tools where applicable. Bachelor’s degree or higher in Electrical Engineering or a closely related discipline. Several years of experience in a senior or lead electrical engineering role within construction or contracting environments. Familiarity with Egyptian codes and standards, as well as applicable international standards (e.g., IEC, IEEE, NFPA), is preferred. Ability to read and interpret technical specifications, prepare reports, and communicate clearly with multidisciplinary teams and clients. Strong problem-solving, planning, and organizational skills, with attention to safety, quality, and project deadlines. Professional registration or membership in a recognized engineering body is an advantage.

Company Description El Hazek Construction, part of the Egyptian Union for Construction, is a leading construction company with over 45 years of experience delivering large-scale projects across Egypt. The company’s portfolio spans residential, commercial, hospitality, infrastructure, and industrial developments. El Hazek is recognized for precision, reliability, and innovative approaches in project execution. With a strong focus on quality, safety, and client satisfaction, the company is a trusted partner for both public and private sector clients. El Hazek is dedicated to building projects that shape communities and support long-term progress.<br>Role Description The Senior Mechanical Site Engineer is a full-time, on-site role based in Cairo, Egypt. This role is responsible for overseeing mechanical works on construction sites, including HVAC, plumbing, firefighting, and other mechanical systems, ensuring compliance with project specifications, safety standards, and timelines. Daily tasks include reviewing and interpreting mechanical drawings and specifications, coordinating with design, civil, and electrical teams, and supervising contractors and technicians during installation, testing, and commissioning activities. The Senior Mechanical Site Engineer conducts site inspections, assesses progress, resolves technical issues, and prepares reports and documentation for project stakeholders. The role also involves managing materials and equipment, supporting maintenance planning, and ensuring adherence to quality control procedures and site safety regulations.<br>Qualifications<br> Strong background in Mechanical Engineering with hands-on experience in site-based mechanical works for construction projects. Proficiency in Computer-Aided Design (CAD) tools for reviewing, modifying, and coordinating mechanical drawings and layouts. Demonstrated skills in Maintenance and Inspection of mechanical systems, including testing, commissioning, and quality control on-site. Experience with automotive or heavy construction equipment is an advantage, particularly related to mechanical systems and site logistics. Bachelor’s degree in Mechanical Engineering or a closely related field. Proven experience in a similar role within large-scale construction projects, preferably as a site or senior mechanical engineer. Knowledge of relevant mechanical codes, standards, and safety regulations applicable to building and infrastructure projects. Strong problem-solving, time management, and organizational skills, with the ability to prioritize tasks in a fast-paced site environment. Effective communication and team collaboration skills, including coordination with multidisciplinary teams and external stakeholders. Ability to work full-time on-site in Cairo, Egypt and adapt to changing project needs and schedules.

Company Description El Hazek Construction, part of the Egyptian Union for Construction, is a leading construction company with over 45 years of experience delivering large-scale projects across Egypt. The company’s portfolio spans residential, commercial, hospitality, infrastructure, and industrial developments. El Hazek is recognized for precision, reliability, and innovative approaches in project execution. With a strong focus on quality, safety, and client satisfaction, the company is a trusted partner for both public and private sector clients. El Hazek is dedicated to building projects that shape communities and support long-term progress.<br>Role Description The Senior Mechanical Site Engineer is a full-time, on-site role based in Cairo, Egypt. This role is responsible for overseeing mechanical works on construction sites, including HVAC, plumbing, firefighting, and other mechanical systems, ensuring compliance with project specifications, safety standards, and timelines. Daily tasks include reviewing and interpreting mechanical drawings and specifications, coordinating with design, civil, and electrical teams, and supervising contractors and technicians during installation, testing, and commissioning activities. The Senior Mechanical Site Engineer conducts site inspections, assesses progress, resolves technical issues, and prepares reports and documentation for project stakeholders. The role also involves managing materials and equipment, supporting maintenance planning, and ensuring adherence to quality control procedures and site safety regulations.<br>Qualifications<br> Strong background in Mechanical Engineering with hands-on experience in site-based mechanical works for construction projects. Proficiency in Computer-Aided Design (CAD) tools for reviewing, modifying, and coordinating mechanical drawings and layouts. Demonstrated skills in Maintenance and Inspection of mechanical systems, including testing, commissioning, and quality control on-site. Experience with automotive or heavy construction equipment is an advantage, particularly related to mechanical systems and site logistics. Bachelor’s degree in Mechanical Engineering or a closely related field. Proven experience in a similar role within large-scale construction projects, preferably as a site or senior mechanical engineer. Knowledge of relevant mechanical codes, standards, and safety regulations applicable to building and infrastructure projects. Strong problem-solving, time management, and organizational skills, with the ability to prioritize tasks in a fast-paced site environment. Effective communication and team collaboration skills, including coordination with multidisciplinary teams and external stakeholders. Ability to work full-time on-site in Cairo, Egypt and adapt to changing project needs and schedules.

???? مطلوب مهندس مبيعات (Sales Engineer)<br>تعلن شركة EGY SWISS عن حاجتها لتعيين مهندس مبيعات للعمل في مجال كيماويات ومواد البناء.<br>المتطلبات:<br>بكالوريوس هندسة (مدني / عمارة / ميكانيكا أو ما يعادلها).حديث التخرج أو خبرة حتى سنة.مهارات تواصل وتفاوض ممتازة.القدرة على التعلم السريع وتحقيق المستهدفات البيعية.يفضل وجود رخصة قيادة.<br>المهام الوظيفية:<br>الترويج لمنتجات الشركة من كيماويات ومواد البناء.زيارة شركات المقاولات والمكاتب الاستشارية والمواقع.تقديم الدعم الفني للعملاء والتعريف بمميزات المنتجات.متابعة العملاء وإعداد عروض الأسعار.تحقيق أهداف المبيعات وبناء علاقات طويلة الأمد مع العملاء.<br>مكان العمل: [مدينة نصر]<br>للتقديم: يرجى إرسال السيرة الذاتية علي الواتس 01019592026 مع كتابة Sales Engineer في عنوان الرسالة.

Role Description This is a full-time on-site role for a Presales Engineer for access control and physical security systems. The Presales Engineer will be responsible for providing technical support to customers, collaborating with sales teams to secure and win business, integrating solutions, and ensuring security. Estimate and prepare the bill of quantities for access control systems. Conduct material takeoff from received drawings Preparing Technical submittals for projects designed and support if required in team members' technical submittals. Prepare workshop drawings if needed from projects which have been awarded.<br>Qualifications Minimum 3-5 Years of Experience in access control systems & CCTVBachelor's degree in Engineering Technical Support and Presales skills Excellent written and verbal communication skills Problem-solving and critical thinking skills Strong attention to detail and organizational skills

We’re Hiring | Technical Office & Projects Engineer<br><br>Not just a technical office engineer…Not just a site engineer…<br><br>We’re looking for someone who can handle the full project cycle professionally.<br><br>From:✔ Technical drawings & shop drawings✔ Coordinating with production teams✔ Following up manufacturing execution✔ Delivery & on-site installation✔ Solving technical/site issues✔ Managing project progress till final handover<br><br>If you only have office experience OR only site experience, this role may not be the right fit.<br><br>What we’re looking for:<br><br>Strong technical office background<br><br>Solid project follow-up experience<br><br>Hands-on site installation & execution experience<br><br>Ability to coordinate between production, clients, and site teams<br><br>Auto CAD proficiency is a must<br><br>Experience in fiberglass / manufacturing / industrial projects is highly preferred<br><br>This is a challenging role with real responsibility and direct project ownership.

WHO IS LAFARGE? As a member of Holcim Group, a global leader in innovative and sustainable building solutions, Lafarge is enabling greener cities, smarter infrastructure, and improved living standards all over Egypt. With sustainability at the core of our strategy, we are becoming a net-zero company, thriving with our people and communities. Lafarge Egypt launched one of the largest cement plants in the MENA region which is located in Ain Al-Sokhna, with a plant capacity of 9.5 MT and 5 state-of-the-art production lines. Through its established business operations in Cement, Ready-Mix concrete, Lafarge Egypt has demonstrated its commitment to the provision of sustainable building materials. Lafarge Egypt continuously seeks to meet the needs of a wide range of customers including but not limited to individual homebuilders, large construction companies, architects, or local artisans, powered by 1500 passionate employees.<br>Overview:The Electrical Site Engineer will be responsible to follow up on all construction electrical, instrumentation and control system erections according to health & safety regulations during the determined time table<br>Responsibilities:Apply health and safety rules in the plant (project area) for PPE & energy isolation. Conducts risk assessments of daily activities required to ensure a safe work environment and to maintain personal safety and the safety of others. Supervises Electrical & instrumentation and control system installation work, records notes, and reports them to the project contractor. Supervises Electrical & instrumentation calibration with the installation contractor. Attends the daily meeting of project engineers with the contractor and ensures implementation according to the schedule and implementation of the notes reported. Supervises the operation of the equipment cold run test Supervises the implementation of contractors' work and ensures that work is carried out in accordance with occupational health and safety instructions and the company's standard systems Supervises the operation of equipment, sequence testing, fault testing, and protection devices, and ensures their operation in the main control room.<br>WHO ARE LAFARGE PEOPLE? Lafarge people are passionate about finding better ways to build. They embrace innovation and improvement with a pioneering spirit. They work as trusted partners, creating better solutions and experiences for their customers, communities, and colleagues.<br>YOUR LAFARGE EXPERIENCE:At Lafarge, there is endless opportunity for you to play your part. Whether you’re in a technical, managerial, or frontline role, you can shape a career that works for you. With us you’ll have the chance to embrace the passion we share for our planet. You’ll be encouraged to seek out diverse perspectives, share your ideas, and build the skills and connections you need to perform at your best. Because it’s only when we work together in a culture where everyone thrives, that we can build the world we all want to live in.

About Immensa Immensa is transforming how the world's largest energy companies address critical spare part challenges. Our solutions help asset-intensive organisations decrease over-stocking, reduce downtime, manage obsolescence, and strengthen supply chain resilience through advanced digital inventory and distributed manufacturing technologies. We partner with some of the world's largest Oil & Gas and industrial companies, supporting mission-critical operations where reliability, quality, and trust are essential.<br>Role Overview We are seeking a Manufacturing Engineer – Subject Matter Expert (Static Equipment), reporting to the Head of Project Management. This is an individual contributor role with matrix accountability for assigned project teams and supplier deliverables. To act as the technical subject-matter expert for static equipment — valves, pressure vessels, heat exchangers, columns, tanks, skids and associated piping — across assigned manufacturing projects, interpreting 3D models and 2D engineering drawings to define, plan and drive execution. To own the manufacturing project lifecycle for static equipment component scopes, from kick-off through supplier delivery and final inspection, ensuring On-Time-In-Full (OTIF) delivery against customer requirements. To be the primary technical and commercial interface between Immensa and its static equipment and fabrication supply base, translating design intent into a manufacturable, code-compliant and quality-assured production route.<br>Main Responsibilities Read, interpret and validate 3D CAD models and 2D engineering drawings — including GD&T, datums, tolerances, weld symbols and joint details, corrosion allowance, material and NDT callouts — for pressure-retaining and fabricated static equipment. Select and justify the optimum manufacturing route (plate cutting and rolling, forming and pressing, shell and head fabrication, nozzle and flange preparation, tube-to-tubesheet welding and expansion, cladding and weld overlay, machining of sealing faces, post-weld heat treatment) and material of construction for the service conditions. Address fabrication specifics — weld procedure and welder qualification (WPS/PQR/WPQ), welding sequence and distortion control, fit-up and alignment tolerances, out-of-roundness, PWHT cycles and pressure-test requirements. Develop and manage project schedules, milestones and deliverables for assigned static equipment orders, tracking live status against OTIF targets. Drive supplier execution — issue technical data packages, review fabrication and welding process plans, weld maps and manufacturing record books, and close out technical queries. Lead design and process reviews; identify barriers early and apply sound engineering judgement to provide practical solutions. Own risk identification and mitigation across technical feasibility, quality, cost and delivery; maintain project risk and lessons-learned registers. Manage stakeholders across sales, DFAM/design, quality, production and the customer, providing clear status reporting and timely escalation. Review inspection and test data (dimensional, radiography, UT, MPI/DPI, PMI and hardness, hydrostatic and pneumatic test records, material certificates) and disposition non-conformances with the responsible design engineer. Support Quality in preparing Inspection & Test Plans (ITPs), coordinate third-party and authorised-inspector involvement, and ensure supplier compliance to ASME, API, ASTM and customer specifications. Support estimation and tendering by defining the manufacturing journey, fabrication, welding, NDT and testing costing inputs and realistic lead times for static equipment scopes. Coordinate reverse-engineering and spare-parts projects for legacy static equipment and internals, justifying OEM design and material adaptations where required to achieve manufacturability and code compliance.<br>Scope of Authority Works closely with sales, DFAM/design, quality, production and external suppliers. Authorised to direct supplier technical execution and disposition assigned project deliverables within the project management framework.<br>Accountabilities Strict adherence to the Company's Policies & Procedures. Operate strictly within the Company ISO framework. Delivery of assigned projects to OTIF, quality and cost targets as per set KPIs.<br>Qualifications and Skills Required Degree in Mechanical, Manufacturing or Welding Engineering (minimum Bachelor's). Minimum 5–6 years' experience in static equipment fabrication within oil & gas, energy or heavy engineering, ideally gained with a pressure-vessel or heat-exchanger fabricator. Deep subject-matter expertise in the design intent and fabrication of pressure vessels, shell-and-tube and air-cooled heat exchangers, columns, storage tanks and piping — including welding processes, weldability of carbon, low-alloy, stainless and clad materials, heat treatment and associated NDT methods. Proven ability to read and interpret 3D models and 2D engineering drawings, including full GD&T and welding callouts. Strong familiarity with ASME VIII Div. 1 and Div. 2, ASME IX and B31.3, TEMA, API (including 650, 660, 661 and 510), ASTM and equivalent standards for materials and applications. Welding or inspection certification (CSWIP, AWS CWI, IWE/IWT or equivalent) is an advantage. Demonstrated project-management capability — planning, scheduling, risk mitigation and stakeholder management. Excellent communicator; tailors technical messaging to internal teams, external customers and suppliers. Knowledgeable in reverse engineering, spare-parts production, inspection and testing. Exceptional attention to detail and accuracy under pressure, with a strong sense of urgency and ownership. Self-motivated team player, effective both independently and across multiple locations and time zones.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Lead QA/QC Engineer - Construction and Contracting provides operational, technical, and functional leadership across construction and contracting activities while ensuring alignment with organizational standards, business objectives, and regulatory requirements. The role is responsible for driving performance, coordination, compliance, stakeholder engagement, and service delivery within the qa/qc function. The position supports continuous improvement initiatives, cost optimization, operational efficiency, and quality outcomes while collaborating closely with internal teams, contractors, clients, and business stakeholders.</p><br><br><br><u><b>Job Responsibilities 1</b></u> <br>Operational Management: Manage day-to-day qa/qc activities within the construction and contracting environment to ensure efficient execution, compliance with procedures, and achievement of operational targets while maintaining service quality and productivity standards. Planning and Coordination: Coordinate schedules, manpower, materials, contractors, and operational activities to ensure timely completion of tasks, projects, and deliverables in line with approved timelines and business requirements. Stakeholder Engagement: Liaise with internal departments, consultants, suppliers, subcontractors, clients, and operational teams to ensure smooth communication, issue resolution, and alignment on technical and operational requirements. Compliance and Governance: Ensure compliance with company policies, contractual obligations, regulatory standards, HSE requirements, and industry best practices applicable to the construction and contracting sector. Performance Monitoring: Monitor operational KPIs, productivity, service standards, and quality benchmarks while identifying gaps, implementing corrective actions, and driving continuous improvement initiatives. Reporting and Documentation: Prepare operational reports, technical records, progress updates, cost analyses, and management presentations to support decision-making, audit readiness, and business transparency. Resource Optimization: Support efficient utilization of manpower, equipment, budgets, materials, and operational resources to improve productivity, reduce waste, and optimize operational costs. Risk and Issue Management: Identify operational risks, technical challenges, delays, and performance issues while implementing mitigation measures and escalation processes to minimize business impact. Quality Assurance: Support the implementation of quality assurance and quality control procedures to ensure services, deliverables, and operational outputs meet company and client expectations. Continuous Improvement: Contribute to process enhancements, digital initiatives, workflow optimization, and operational excellence programs to improve efficiency, service delivery, and overall business performance.<br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br>Sector Operations Knowledge: Strong understanding of operational requirements, standards, workflows, and regulatory expectations within the construction and contracting sector. Technical and Functional Expertise: Advanced knowledge of qa/qc processes, documentation, reporting standards, systems, and operational controls relevant to the role. Stakeholder Coordination: Ability to manage cross-functional communication, contractor coordination, client engagement, and team collaboration within fast-paced operational environments. Systems and Reporting: Proficiency in ERP systems, reporting tools, Microsoft Office applications, operational dashboards, and performance tracking methodologies. Problem Solving and Decision Making: Strong analytical, organizational, and decision-making capabilities with the ability to resolve operational issues and support business continuity.<br><br><u><b>Job Experience</b></u> <br>Industry Experience: Proven experience within the construction and contracting sector handling operational, technical, project, or functional responsibilities related to the role. Operational Coordination Exposure: Demonstrated experience coordinating teams, contractors, stakeholders, resources, and service delivery activities within complex operational environments. Compliance and Performance Management: Experience supporting KPI management, reporting, process improvement, quality compliance, and operational efficiency initiatives.<br><br><u><b>Competencies</b></u> <br>Leadership<br>Resilience<br>Quality<br>Agility<br>AI Fluency<br>Material testing &amp; Standard awareness L3<br>QA Audits L3<br>Quality Assurance L3<br>Statistical Quality Control L3<br>Sub-contractor Quality Management L3<br><br><br><u><b>Education</b></u> <br><br><br> </div>

Job Title - Senior Field Service Engineer Reporting To - Operations Director Location - Cairo, Egypt<br>Key Responsibilities Attend site either on or off shore within the African Continent in support of the business development for installation, commissioning, site investigation and site reviews / inspections. Ensure all personnel working within the team are working safely, have appropriate inductions, risk assessments and toolbox talks and are following both TSS and client safety methods and standards. Act as mentor and give guidance to Field Service Engineers in their day to day tasks. Ensure all OEM procedures are followed, taking appropriate actions to ensure quality and recording data into the QA system. Liaise with the Torishima engineering support team and/or the client field engineer to ensure correct actions are taken. Promotion of TSS core values when working with and on customers sites, identifying potential revenue streams that add value to both the customer and to TSS. Manage onsite resources, ensuring the most productive use of all hours available. Liaising with the TSS Service Manager and service administration when required. Identify and source required materials and equipment and make them available to the worksite as appropriate. Ensure all Client Permit to Work, and other work order card procedures are in place prior to and during operations. Ensure daily reports are accurate and timesheets signed and submitted on a daily basis. Submission of field technical reports on work completed and recommendations following site visits. Installation and commissioning of equipment as per OEM procedures. Quality of workmanship. Accurate and on time submission of field service reports. Completion of work in line with work plan, highlighting additional work and potential claims. Identification of complimentary work with the client when on site.<br>Qualifications & Requirements English and Arabic essential. Engineer with Bachelor’s Degree. Computer Literate.<br>Prior Work Experience & Skills Formal technical apprenticeship. Ability to travel within the African Continent. Strong working knowledge of rotating equipment with an emphasis on high pressure, vertical and split casing pump types and associated equipment. Understanding of pump operation and fault finding of equipment in the field. Work experience on Power, Desalination / RO plants and onshore / offshore oil and gas installations. Workshop experience. Self starter with the ability to make technical decisions. Strong interpersonal communications skills. Ability to develop relationships with others. Ability to identify sales opportunities and maintain customer relationships. Good computer skills and report writing skills, a safe driving record and a valid driver's license. Minimum of 7-10 years relevant experience.

About the Role We are seeking a results-driven Technical Sales Engineer to join our growing team. In this role, you will act as the crucial link between top-tier consultants, architects, and engineering firms to get our premium flooring solutions specified into major commercial, healthcare, and educational projects. You will work closely with design decision-makers to present technical data, prepare precise Bill of Quantities (BOQ), and ensure our product specifications are seamlessly integrated into project tenders.<br>Key Responsibilities Specification Selling: Build and maintain strong relationships with consultants, architects, interior designers, and project owners to specify our technical flooring products into upcoming projects. BOQ Preparation: Review project architectural drawings and specifications to generate accurate Bill of Quantities (BOQ) matching our product technical standards. Technical Presentation: Conduct product presentations, technical seminars, and continuous professional development (CPD) sessions for engineering and consulting firms. Tender & Compliance Support: Prepare technical compliance sheets, submittals, data sheets, and sample kits for client approvals. Pipeline Tracking: Monitor project stages from early design phase through tender to final execution, ensuring our specified products remain in the final bill.<br>Qualifications & Requirements Education: Bachelor’s degree in Civil Engineering, Architectural Engineering, or a related field. Experience: 3+ years of experience in technical sales, specification engineering, or building materials (flooring/finishing experience is a strong plus). Skills:Proven track record of working with engineering consultants and specifying products. Strong ability to read architectural drawings and prepare accurate BOQs. Deep understanding of technical data sheets, test reports, and submittal processes.

Role Summary The Specification Sales Engineer drives long-term commercial growth by establishing, defending, and securing product specifications across architectural, design, and engineering consultancy firms. This role requires frequent face-to-face field visits, technical presentations, and relationship-building to ensure company products, exact product codes, and brand names are locked into project Bills of Quantities (BOQs) and Approved Vendor Lists (AVLs). Key Responsibilities Consultant & Designer Engagement Conduct routine field visits and product presentations to architects, interior designers, structural engineers, and technical consultants. Organize and deliver formal Lunch & Learn sessions, technical seminars, and mock-up demonstrations to showcase product performance and technical advantages. Map and build long-term working relationships with key decision-makers, specifiers, and material managers across targeted design and consultancy firms. Specification Lock & BOQ Compliance Assist consultants in writing architectural and technical performance specifications that favor the company’s product line. Ensure company brand names, exact product codes, and technical attributes are accurately listed in project BOQs, tender documents, and schedules. Review project tender documents, drawings, and submittals to identify specification risks or unauthorized product substitutions by contractors. Vendor List Approvals (AVL) Drive the full registration process to get company products listed on Approved Vendor Lists (AVL) and Approved Manufacturer Lists (AML) with top developers, government authorities, and consultancy firms. Prepare, submit, and track technical pre-qualification documentation, test reports, certificates, and compliance submittal packages. Pipeline Management & Cross-Functional Support Track targeted projects through all design phases (schematic, detailed design, tender, and procurement) to safeguard specifications until contract award. Partner with the contractor sales team to hand over specified projects once main contractors and subcontractors are appointed. Gather market intelligence on competitor activities, upcoming projects, and changing local regulatory codes. Key Performance Indicators (KPIs) Activity Metrics: Weekly and monthly target for face-to-face visits, technical presentations, and consultant meetings. Specification Volume: Total number and monetary value of projects specified in design stages. BOQ Lock-In Rate: Percentage of specified projects where product code and brand name appear unchanged in final tender BOQs. Vendor List Additions: Number of successful AVL/AML registrations completed per quarter. Candidate Qualifications & Skills Education: Bachelor’s degree in Architectural Engineering, Civil Engineering, or related technical discipline. Experience: 3–5+ years of proven experience in specification sales, building materials, or technical business development targeting architects and consultants. Technical Proficiency: Ability to read architectural plans, technical drawings, and spec documents; knowledge of BIM/CAD tools is a plus. Core Competencies: Outstanding presentation skills, strong technical negotiation, persistent field orientation, and strategic network building.

Position Overview The Procurement Engineer is responsible for managing the end-to-end procurement cycle, from identifying project requirements and developing procurement packages to negotiating, awarding, and administering contracts. The role ensures the timely procurement and delivery of materials, equipment, and subcontracted services while maintaining quality, cost efficiency, and compliance with project specifications and company policies. The Senior Procurement Engineer also monitors supplier performance, develops strategic vendor relationships, and provides guidance to junior procurement team members. Key Responsibilities Procurement Planning & Execution Lead the procurement process from project requirements identification through contract award and delivery. Develop and execute procurement plans to ensure the timely availability of materials, equipment, and subcontracted services. Prepare technical documentation, drawings, specifications, and Requests for Quotation (RFQs) for suppliers and subcontractors. Review purchase and service requests from project teams and issue purchase orders where applicable. Ensure all procurement activities comply with project specifications, contractual requirements, and company procedures. Supplier & Subcontractor Management Lead negotiations with local and international suppliers and subcontractors to achieve the best commercial and technical outcomes. Collect and evaluate quotations, prepare comparison sheets, and recommend the most suitable suppliers and subcontractors. Build and maintain strong relationships with suppliers and subcontractors to support current and future business requirements. Identify, evaluate, and recommend new suppliers and subcontractors to expand the approved vendor database and maintain a competitive supply chain. Monitor and evaluate supplier performance through feedback from business units and project teams. Contract Management Draft, review, negotiate, and administer procurement contracts in accordance with company policies and applicable legal requirements. Ensure contractual obligations are fulfilled and resolve contractual issues when required. Monitor contract performance and support effective contract closeout activities. Performance Monitoring & Process Improvement Monitor procurement performance to ensure project schedules and procurement milestones are achieved. Identify opportunities to improve procurement processes, optimize costs, and increase operational efficiency. Maintain procurement records, documentation, and reports in accordance with company standards. Team Leadership Provide guidance, coaching, and technical support to junior procurement team members. Promote knowledge sharing and contribute to the continuous development of the procurement function.<br><br>Qualifications & Experience<br>Education Bachelor's degree in engineering, Supply Chain Management, or a related discipline.<br>Experience:Minimum 2 years of experience in procurement within the construction industry.<br>Skills & Competencies<br>Technical Skills: Proficient in Microsoft Office, ERP Systems, Auto CAD, and procurement management practices.<br>Language Skills: Advanced proficiency in English (written and verbal).<br>Soft Skills: Strong communication, negotiation, analytical thinking, organization, attention to detail, teamwork, and flexibility.<br>Certifications (Preferred) Professional certifications in Supply Chain Management, Procurement, or Project Management (e.g., PMP, CPSM, CIPS) are considered an asset.<br>About EDECS:EDECS is a leading organization with 30 years of experience in marine constructions, infrastructure, earthworks, and transportation projects in Egypt and Saudi Arabia, employing more than 2,000 employees. The organization provides innovative, sustainable, and cost-effective solutions for a wide range of projects, delivering excellence and meeting the highest standards of quality, safety, and sustainability. The organization has a strong presence in logistics projects, including high-speed and light-speed railways, railway stations, and commercial and administrative buildings. The organization also has extensive experience in earthworks, water irrigation, and yacht marinas. EDECS is a trusted partner for employers seeking to make a positive impact on the communities they serve.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.</p><br> <p>Could you be the full-time Signalling Hardware Application Engineer in Cairo we’re looking for?</p><br><p><strong>Your future role</strong></p><br> <p>Take on a new challenge and apply your hardware application engineering expertise in a cutting-edge field. You’ll work alongside collaborative and detail-oriented teammates.</p><br> <p>You'll play a pivotal role in delivering high-quality signalling hardware solutions that ensure safe and efficient railway systems. Day-to-day, you’ll work closely with teams across the business (such as V&amp;V, installation, and testing &amp; commissioning teams), support the preparation of Bill of Materials (BOM), and much more.</p><br> <p>You’ll specifically take care of designing hardware engineering drawings, including cable plans and wiring diagrams, but also contribute to analyzing requirements and managing design change requests.</p><br> <p>We’ll look to you for:</p><br> <ul> <li> <p>Preparing and executing hardware and application engineering activities for bids, projects, and programs</p><br> </li> <li> <p>Delivering hardware design drawings, including signaling equipment layouts, cabinet and rack designs</p><br> </li> <li> <p>Taking ownership of assigned tasks and ensuring quality and timeliness</p><br> </li> <li> <p>Preparing Bill of Materials (BOM), including equipment codification and quantities</p><br> </li> <li> <p>Organizing and producing documentation and hardware design deliverables</p><br> </li> <li> <p>Analyzing and managing design change requests</p><br> </li> <li> <p>Ensuring the independence of design activities from verification activities</p><br> </li> </ul> <p><br><strong>All about you</strong></p><br> <p>We value passion and attitude over experience. That’s why we don’t expect you to have every single skill. Instead, we’ve listed some that we think will help you succeed and grow in this role:</p><br> <ul> <li> <p>Bachelor’s degree in Electrical, Electronic, or Control &amp; Automation Engineering</p><br> </li> <li> <p>0-2 years of experience in engineering or technical functions within railway projects</p><br> </li> <li> <p>Knowledge of railway systems and signalling equipment</p><br> </li> <li> <p>Proficiency in AutoCAD and experience with Visual Basic® Applications for AutoCAD</p><br> </li> <li> <p>Experience in designing electrical diagrams, such as scheme plans, cable plans, and cabinet configurations</p><br> </li> <li> <p>Fluent in English with strong interpersonal skills</p><br> </li> <li> <p>Self-motivated with a passion for technical matters and a quick learner</p><br> </li> <li> <p>Team player with a collaborative mindset</p><br> </li> <li> <p>No restrictions to travel</p><br> </li> </ul> <p><br><strong>Things you’ll enjoy</strong></p><br> <p>Join us on a life-long transformative journey – the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. You’ll also:</p><br> <ul> <li> <p>Enjoy stability, challenges and a long-term career free from boring daily routines</p><br> </li> <li> <p>Work with new security standards for rail signalling</p><br> </li> <li> <p>Collaborate with transverse teams and helpful colleagues</p><br> </li> <li> <p>Contribute to innovative projects</p><br> </li> <li> <p>Utilise our dynamic and inclusive working environment</p><br> </li> <li> <p>Steer your career in whatever direction you choose across functions and countries</p><br> </li> <li> <p>Benefit from our investment in your development, through award-winning learning</p><br> </li> <li> <p>Progress towards becoming a Senior Hardware Engineer or other roles</p><br> </li> </ul><p>You don’t need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you’ll be proud. If you’re up for the challenge, we’d love to hear from you!</p><br> <p><br><strong>Important to note</strong></p><br> <p>As a global business, we’re an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We’re committed to creating an inclusive workplace for everyone.</p><br> </div>

Company Description Details Contractors is a main contracting, fit-out, and project management company founded by a dynamic team with strong experience in retail project delivery. Since its establishment in 2015, the company has grown into a key player in construction, project management, material supply, and building projects. The name “Details” reflects a commitment to precision and careful attention to every aspect of each project. The team focuses on high-quality execution, reliable timelines, and close collaboration with clients and partners. This environment offers growth opportunities for professionals who value technical excellence and detailed craftsmanship.<br>Role Description This is a full-time, on-site Mechanical Engineer "Technical Office" role based in Qesm El Sheikh Zaid. The Mechanical Engineer will prepare and review mechanical design drawings, shop drawings, and as-built drawings, ensuring compliance with project specifications, codes, and standards. Daily tasks include performing mechanical calculations, coordinating with design and construction teams, and providing technical support for HVAC, plumbing, fire-fighting, and related systems. The role involves reviewing material submittals, RFIs, and method statements, as well as assisting in cost estimates, quantity take-offs, and technical comparisons. The Mechanical Engineer will collaborate closely with project managers, site engineers, suppliers, and subcontractors to resolve technical issues and support smooth project execution.<br>Qualifications<br> Strong foundation in Mechanical Engineering, with proven experience in building services or construction-related projects. Proficiency in Machine Design and applied mechanics for evaluating and adapting mechanical components within project requirements. Hands-on experience with Computer-Aided Design (CAD) tools (e.g., Auto CAD, Revit, or similar) for preparing and reviewing technical drawings. Ability to contribute to Project Management activities, including planning support, coordination with stakeholders, and monitoring technical deliverables. Research and Development (R&D) mindset to analyze technical options, optimize designs, and propose innovative, cost-effective solutions. Bachelor’s degree in Mechanical Engineering or a closely related field. Familiarity with relevant mechanical codes, standards, and local regulations for building services. Strong analytical skills, attention to detail, and ability to work collaboratively in a fast-paced, project-driven environment. Effective written and verbal communication skills for technical documentation and coordination.

Start up Receive & review the project documents (specifications, drawings, BOQ’s) Participate in the preparation of the project’s Quality Documents (PQP, QMP’s and ITP’s, WPS’s, PQR’s etc.) including the quality forms that will be used along the project period Manage concrete trial mixes with vendor and client Manage Testing of primary materials (Rebar, CMU) for source approval Execution Manage and perform Material Inspection upon receiving at site (MIR’s) Conduct random inspection on site activities and raise NCR alerts in case of defects/noncompliance. Identifying, eliminating, managing risks related to poor quality via NC alerts through daily site surveillance Issue of Non-Conformance Reports (NCR’s) and the necessary follow-up of Corrections and Corrective actions. Perform 2nd Party audits on suppliers/Manufacturers. Managing testing agencies and 3rd parties within the project area Close out Participate in assuring that all live quality documents (IR’s, MIR’s, NCR’s and test reports) are complete, scanned and filed in a manner matching the requirements of the contract or as per agreed with the client Participate in assuring that all external/internal NCR’s are closed Managing the issuance and closure of punch lists till acquiring the Taking over certificates (partial and final) Participate in the preparation of the project Quality close out report.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>A lead electrical engineer&nbsp;</span></p><br><br> Missions/Main Duties <br><p>Supervise site electrical installation works for Section 1 of the high-speed railway project.</p><br><br><br><p>Monitor contractor performance, progress, workmanship, and compliance with approved documents.</p><br><br><br><p>Review electrical drawings, technical submissions, material approvals, and method statements.</p><br><br><br><p>Coordinate interfaces between electrical systems and other railway and infrastructure disciplines.</p><br><br><br><p>Support inspection, testing, commissioning, and handover activities.</p><br><br><br><p>Identify and resolve technical issues arising during construction.</p><br><br><br><p>Ensure compliance with project quality standards, specifications, and HSE requirements.</p><br><br><br><p>Prepare site reports, progress updates, non-conformance observations, and technical correspondence.</p><br><br><br><p>Attend coordination meetings with clients, contractors, consultants, and internal teams.</p><br><br><br><p>Contribute to schedule tracking and support mitigation actions for delays or site constraints.</p><br><br> Profile/Skills <br><p>Bachelor’s degree in&nbsp;<em>Electrical Engineering</em>&nbsp;or a related discipline.</p><br><br><br><p><em>8-10 years</em>&nbsp;of relevant professional experience in electrical site engineering.</p><br><br><br><p>Proven experience in <em>railway</em>,&nbsp;<em>metro</em>,&nbsp;<em>high-speed rail</em>, or major infrastructure projects is strongly preferred.</p><br><br><br><p>Experience with electrical systems such as power supply, substations, cable routing, earthing and bonding, lighting, low-voltage systems, and interface coordination is highly desirable.</p><br><br><br><p>Strong knowledge of construction supervision, inspection, testing, and commissioning processes.</p><br><br> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>On-site</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

We’re Hiring: Quality Engineer Company: Alex Fort Worth Location: Various Project Sites across Egypt – including Sokhna, Minya, Qena, and other locations as required.<br><br>Alex Fort Worth is looking for a Quality Engineer to join our project team and support quality activities across multiple construction sites<br>.<br>Key Responsibilities:Conduct site inspections and ensure compliance with approved drawings, specifications, and quality standards. Monitor workmanship and material quality across project activities. Prepare inspection reports, NCRs, and quality documentation. Follow up on corrective actions and quality observations. Coordinate with project teams, subcontractors, and consultants on quality-related matters. Support the implementation of project QA/QC procedures and requirement<br>s.<br>Requirements:Bachelor’s degree in Engineering.3–5 years of relevant experience in QA/QC or Quality Engineering within construction or EPC projects. Good knowledge of quality documentation and site inspection procedures. Willingness and flexibility to work and relocate between different project sites across Egy<br>pt.

We’re looking for a detail-oriented Technical Office Engineer with (1-2) years of experience in the construction or architecture field. You’ll be responsible for managing technical documentation, shop drawings, quantity surveying, and coordinating with site teams to ensure smooth execution of project tasks.<br>Key Responsibilities Prepare and review shop drawings and technical documents Coordinate with design, site, and multidisciplinary teams Support BOQs, material submittals, and RFIsEnsure compliance with project specs, codes, and timelines<br>What We’re Looking For1–2 years’ experience in a technical office role Strong Revit/Auto CAD. Detail-oriented with solid coordination skills Ability to work under deadlines and deliver quality outputs What We Offer: Competitive salary based on experience Social insurance Professional and supportive work environment Our Website: https://ng-designoffice.com/How to Apply: Interested candidates should submit their resume and cover letter to: eng.careers.2018@gmail.comSubject: Junior Technical Office Engineer

Join Green Line and be part of a leading company specializing in Aluminum, Glass & Facade Systems. Position: Technical Office Engineer We're looking for a detail-oriented and proactive Technical Office Engineer to join our team and contribute to delivering high-quality engineering solutions. Requirements:✔ Bachelor's Degree in Civil or Architecture Engineering.✔ 2–5 years of experience in Technical Office, preferably in Aluminum, Facades, Glass, or Metal Works.✔ Excellent command of Auto CAD.✔ Good knowledge of Shop Drawings, Material Take-Off (MTO), Quantity Surveying, and project coordination.✔ Strong analytical, communication, and problem-solving skills.✔ Cairo residents only. What We Offer:✅ Competitive Salary Package.✅ Career Growth Opportunities.✅ Professional & Supportive Work Environment.✅ Full-Time Employment.???? Ready to take the next step in your career? Send your CV via Whats App:???? 01101605379