وظائف مراقب كهرباء في مصر

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead the utilities drafting and shop drawing team for UAE infrastructure projects. Lead utilities drafting, technical review, coordination, and full ownership of utilities shop drawings from IFC review until consultant approval and site release. Ensure utility drawings are accurate, constructible, coordinated with roads and structures, compliant with authority requirements, and issued according to the submission programme. Scope of Work Stormwater Sewerage Potable water Irrigation Firefighting Electrical ducts Telecom ducts Street lighting ITS ducts Utility corridors Manholes Chambers Gullies Catch basins Valve chambers Duct banks Crossings Utility protection Diversions Relocation works NOC support drawings Key Responsibilities Lead the utilities shop drawing team and distribute work to senior engineers, engineers, junior engineers, draftsmen, and Civil 3D modellers. Prepare, draft, amend, or correct utility drawings when required. Review and approve internal utilities shop drawings before submission. Control preparation of utility layouts, profiles, long sections, cross sections, chamber details, manhole schedules, valve chamber details, duct bank sections, protection details, and setting out drawings. Review gravity networks for slopes, invert levels, cover, flow direction, manhole depths, pipe sizes, tie-ins, and constructability. Review pressure networks for alignment, fittings, valves, chambers, thrust blocks, air valves, washouts, and protection details. Review dry utility networks, including electrical, telecom, street lighting, ITS, duct banks, crossings, chamber locations, and corridor coordination. Check utility interfaces with road levels, pavement layers, kerbs, gullies, catch basins, road grading, and proposed surface levels. Coordinate utilities with roads, structures, bridges, underpasses, retaining walls, culverts, pumping stations, foundations, temporary works, and existing services. Identify utility clashes, insufficient cover, incorrect invert levels, slopes, chamber conflicts, authority conflicts, and non-constructible details. Prepare or review RFIs related to utility conflicts, missing information, authority requirements, design gaps, and site constraints. Review consultant comments and ensure proper closure in revised drawings. Control the utilities drawing submission programme. Maintain and review drawing trackers, comments logs, RFI logs, submission records, approval status, and pending information registers. Guide engineers and draftsmen on utility drafting, profile preparation, chamber detailing, CAD standards, revision control, and authority requirements. Conduct internal quality checks. Coordinate with the roads team. Coordinate with the structures team. Monitor team productivity and deliverables. Train and develop junior engineers and draftsmen. Ensure no utility drawing is submitted or issued without checking, coordination, traceability, and technical acceptance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><b>Software Requirements</b></li><li>AutoCAD Good level (Mandatory)</li><li>Civil 3D Basic level (Preferred)</li><li>MS Excel</li><li>Navisworks or clash review software (Preferred)</li><li><b>Minimum Qualifications</b></li><li>Bachelor's degree in Civil Engineering.</li><li>10 15 years of experience in utilities shop drawings, utility coordination, or infrastructure technical office work.</li><li>Minimum 3 years in a senior review or team lead role.</li><li>UAE or GCC infrastructure experience (Preferred).</li><li>Strong experience with road interface.</li></ul><p></p></section>

ICT IS Hiring | Senior Fire Alarm Engineer International Center for Trading Industrial Safety and Fire (ICT) is looking for an experienced Senior Fire Alarm Engineer to join our Engineering Team. Location: 6th of October City Experience: 4–6 years Education: Bachelor’s Degree in Electrical, Electronics & Communications, or Electromechanical Engineering Key Responsibilities:Supervise and manage Fire Alarm system installation, testing, and commissioning. Review technical drawings, shop drawings, and project specifications. Coordinate with site teams, consultants, and contractors. Ensure compliance with NFPA 72 and project requirements. Troubleshoot technical issues and ensure proper system performance. Monitor site progress, quality, and technical execution. Requirements:Strong knowledge of NFPA 72. Good command of Auto CAD & MS Office. Strong communication and problem-solving skills.

Company Description Amjaad Technology is a leading corporation in IoT and utility management, providing smart metering solutions for electricity, water, BTU, and gas. Through its innovative io Meter System, the company enables utility service providers, real estate developers, and smart cities to drive digital transformation and optimize energy management. Amjaad Technology develops platforms for community and facilities management that enhance efficiency, improve resource utilization, and streamline operations in smart cities. With over 300 successful projects across Egypt, Saudi Arabia, and the UAE, its solutions have positively impacted more than 200,000 people. The company focuses on supporting sustainable communities and long-term operational excellence.<br>Role Description The Senior Inventory Control role is a full-time, on-site position based in Qesm El Maadi. This role is responsible for overseeing inventory processes, ensuring stock accuracy, and managing physical inventory counts across warehouses and storage locations. Daily tasks include monitoring inventory levels, validating shipping and receiving activities, reconciling discrepancies, and implementing inventory control procedures. The Senior Inventory Control professional will collaborate with procurement, operations, and logistics teams to optimize inventory management and support demand planning. The role also includes preparing inventory reports, analyzing trends, and recommending process improvements to reduce waste and prevent stockouts or overages.<br>Qualifications<br> <br>Candidates should possess strong skills in Inventory Control and Inventory Management, with experience in setting and enforcing policies and procedures. Candidates should possess skills in Inventory Accuracy and Physical Inventory, including cycle counting, auditing, and reconciliation of stock records. Candidates should possess experience in Shipping & Receiving, ensuring proper documentation, verification of inbound/outbound goods, and coordination with logistics. Solid analytical and problem-solving skills, with the ability to interpret inventory data, identify root causes of discrepancies, and implement corrective actions. Proficiency with inventory management systems, ERP or WMS software, and strong Excel skills for reporting and analysis. Excellent organizational skills, attention to detail, and ability to manage multiple priorities in a fast-paced environment. Effective communication and collaboration skills to work with cross-functional teams, including operations, procurement, and finance. Relevant experience in inventory control or supply chain, preferably in technology, utilities, or industrial sectors; a bachelor’s degree in business, logistics, or a related field is an advantage.

JOB PURPOSETo revise on the project’s required materials and coordinate with Procurement, Purchasing, Technical Office and Warehouse Departments to ensure the availability of project requirements of materials according to the project schedule. Roles & Responsibilities Prepare/ modify/ update Material Histogram/ Delivery Duration from Suppliers & Subcontractors in order to have the adequate materials on the required time for operation/ execution while avoiding any cash flow issues or lack of materials Receive material submittal from TPD and Purchasing Department and follow up with technical office to review the materials’ specifications in order to prepare submittal form to be reviewed and approved by the Consultant. Coordinate with main warehouse to alert them whenever extra/ not needed materials are available and to check if the required materials are already available before ordering them. Cooperate with Technical Office, QC, QS department to assure Materials Quality and Quantities comparing to Project's requirements. Review B. O. Q and identify materials needed by communicating with other related departments. Check and Inform about any variations in the material requirements comparing with the project’s contract. Compile all supporting documents (technical and financial offers) for variation submission Ensure the availability of material in coordination with Store keeper Report Suppliers/ Subcontractors' payment Log & follow up suppliers’ payments with Accounting Department. Cooperate with Procurement Department and Purchasing Department to assure Material's technical Status, compliance and budget. Issue request for purchase order to the suppliers and sub-contractors’ agreements. If not initially listed in the Project file Follow up on receiving and distributing of materials according to the project’s needs and control materials waste. Follow up on materials production with the suppliers and their arrival dates to the site. Ensure compliance of used materials with the project's specifications. Handle consultant’s remarks and resolve any problems regarding materials’ quality if any. Generate reports regarding required and available materials and follow up the submittal log and refer them to the Line Manager. Ensure that employee is working according to the company HSE policies and regulations, and fully aware of his job risk assessment and environmental aspects.<br>Education/ Qualifications BSC Engineering ( Mechanical or Electrical ) Work Experience5-7 years’ experience

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>When you join the Sheraton family, you become a member of its global community. We’ve been a place to gather&nbsp;and connect since 1937. At Sheraton, associates create a sense of belonging in more than 400 communities around the world. We invite, we welcome, and we connect guests through engaging experiences and thoughtful service. If you’re a team player who is excited to deliver&nbsp;a&nbsp;meaningful guest experience, we encourage you to explore&nbsp;your next career opportunity&nbsp;with Sheraton. Join us on our mission to be ‘The World’s Gathering Place’. In joining Sheraton Hotels &amp; Resorts, you join a portfolio of brands with Marriott International. Be where you can do your best work,​&nbsp;begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

Role Description The Field Sales Representative role at Egyptian Co. For Electrical Equipment (ECEE) is a full-time, on-site position based in Cairo and other governates. The person in this role visits existing and potential customers to present ECEE’s electrical equipment portfolio, understand customer requirements, and propose suitable solutions. Daily activities include conducting sales meetings, preparing and following up on quotations, negotiating pricing and terms within company guidelines, and closing deals to meet or exceed sales targets. The role involves regular field travel within Cairo and other governates, maintaining accurate records of customer interactions in the CRM system, and coordinating with internal teams such as technical support, logistics, and finance to ensure timely delivery and customer satisfaction. The Field Sales Representative also monitors market trends and competitor activities, participates in trade shows or customer events when needed, and provides feedback to management to support sales strategies and product development.<br>Specfications:· Daily visits to retailers to market products and solutions and identify their needs· Keep contact and a good relationship with retailers on a consistent basis· Fulfill sales targets or exceed· Collaborate well with sales team· Fulfill target of gaining new customers· Be in contact with pre-sales team for technical topics· Provide daily reports of customer visits· Identify, research, and contact potential leads through door-to-door sales and networking.· Visit current clients regularly to ensure satisfaction, manage replenishment orders, and up-sell new products.· Monitor competitor products, pricing, and marketing strategies in the territory.<br><br>Qualifications Proven field sales skills, including prospecting, lead qualification, and closing deals in a B2B environment. Strong customer relationship management and account management abilities, with a focus on long-term partnerships. Solid communication, negotiation, and presentation skills, both in-person and over digital channels. Understanding of electrical equipment or industrial products, with the ability to learn technical specifications and applications/Ability to plan routes, manage time in the field, and maintain organized documentation and reports. Comfort working in an on-site, field-based role in Cairo, including frequent local travel to other governates. Proficiency with basic office and CRM software for tracking opportunities, preparing quotations, and reporting. Bachelor’s degree in Business, Engineering, or a related field, or equivalent practical experience in sales. Self-motivated, goal-oriented, and able to work independently while collaborating effectively with internal teams. Prior experience in electrical equipment, industrial supplies, or related sectors is an advantage. Bachelor’s degree Minimum 2 years of LOW CURRENT experience.

Main Purpose Of The Job Assisting the senior production engineers in the day-to-day operations and continuous improvement of the manufacturing processes.<br><br>Key Responsibilities Monitor production, troubleshoot issues, analyse data, and implement process enhancements to increase efficiency, quality, and safety. Support the production team and help execute the company's manufacturing strategy under the guidance of more experienced engineers. Collect and analyse production data to uncover bottlenecks, quality issues, and optimisation opportunities. Assisting with the implementation of process changes and improvements. Troubleshooting equipment malfunctions and production problems. Supporting maintenance activities and preventive maintenance programmes. Participating in the development of standard operating procedures, work instructions, and training materials. Collaborating with cross-functional teams to enhance manufacturing processes. Identifying and evaluating new technologies, tools, and methods to enhance production.<br><br>Job Requirement:Qualification: Bachelor's degree in engineering.<br>Related Field Experience: +2 years of experience in the same industry is preferable.<br>Overall Experience: +4 years of experience in the electrical maintenance field

:Key Duties and Responsibilities Record all daily financial transactions in the accounting system. Prepare journal entries and perform periodic bank and accounting reconciliations. Review invoices and expenses to ensure compliance with supporting documents and financial policies. Prepare monthly trial balances and periodic financial reports. Monitor accounts receivable and payable and prepare follow-up and collection reports. Assist in the preparation of final financial statements (Balance Sheet, Income Statement, Cash Flow Statement). Coordinate with purchasing, warehouse, and sales departments to ensure accuracy of cost and inventory records. Maintain organized and accurate financial documents and records for easy retrieval. Monitor and control operating expenses in line with the approved budget. Cooperate with external auditors during annual audits and provide all required financial data. Perform any other tasks assigned by the direct manager related to the job scope. :Educational Requirements Bachelor’s Degree: Bachelor of Commerce (Accounting or Finance). Postgraduate Studies: Not required. :Training & Certifications Proficiency in accounting software (e.g., QuickBooks, Odoo, SAP). Proficiency in Microsoft Office applications, especially Excel. :Work Experience Requirements Experience: 2–5 years of accounting experience. Previous experience in the electrical or construction sector is preferred. Good knowledge of Egyptian and International Accounting Standards and tax regulations. :Professional Skills Strong financial analysis and reporting skills. High attention to detail and accuracy. Excellent organizational skills and ability to work within a team. :Personal & Soft Skills Proficiency in computer and accounting applications. Strong communication and interpersonal skills. Good time management, problem-solving, and teamwork abilities. Initiative and quick learning ability. High accuracy in data entry, financial analysis, and review. Ability to meet deadlines and work under pressure. High level of integrity and confidentiality when handling financial data. :Age Requirement From 25 to 30 years old <p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 4</li><li>نظام الورديات: صباحية فقط</li><li>المزايا: تأمين صحي، تأمين اجتماعي، ساعات إضافية</li></ul>

<p>Manage daily quality activities in line with the project quality plan, monitor quality targets based on critical project factors, and define appropriate methods and tools in accordance with standards and contractual requirements. Participate in site inspections and ensure readiness and compliance with project specifications and quality standards. Conduct regular site visits and surveillances to monitor and confirm compliance of construction activities, identifying and reporting potential issues, deviations, and non-compliance in a timely manner. Support in the preparation of comprehensive monthly quality report by consolidating relevant data, observations, and key quality performance metrics, providing insights for continuous improvement. Assist in developing and refining quality processes and procedures contributing to the continuous improvement of the Quality Management System (QMS) and supporting the development of innovative Quality applications and tools. Collaborate closely with project teams, contractors, and suppliers to ensure a shared understanding of quality requirements and to facilitate effective implementation of quality control measures. Review and verify project documentation for quality-related aspects, ensuring accuracy, completeness, and compliance with project and Siemens standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in mechanical, electrical or civil engineering. Demonstrated knowledge and experience in Project Quality Management. ISO 9001:2015 lead auditor certification is a plus Technical knowledge of rail solutions is a plus. Fluency in both written and spoken English and Arabic.</p>

About the Client Our client is a prominent organization will be responsible for overseeing and operating major exhibition and convention venues. The organization manages complex facilities and technical infrastructure, with a strong focus on operational excellence, safety, and reliable engineering systems.<br>Job Title: Central HVAC & Automatic Control Engineer<br>Job Summary Our client is seeking an experienced Central HVAC & Automatic Control Engineer to lead the technical management, operation, and maintenance of central HVAC and automatic control systems across its facilities. Reporting to the General Department of Electricity & Technical Systems, the role will be responsible for developing operational and maintenance plans, supervising technical teams and contractors, and ensuring the safe, efficient, and reliable performance of central air conditioning and Building Management Systems (BMS).<br>Job Responsibilities Supervise technical teams and workers, assigning tasks and following up on execution according to established engineering and technical standards. Provide technical instructions and clearly communicate implementation plans and work methods to subordinate staff. Manage and monitor contracted maintenance companies responsible for HVAC and automatic control systems. Conduct regular technical meetings to address operational challenges, resolve implementation issues, and review improvement initiatives. Develop and implement plans for the operation, maintenance, and efficient use of central HVAC and automatic control systems, including:Central chiller plants and substations. Air Handling Units (AHUs). Split and independent air conditioning units. Building Management Systems (BMS). Automatic control and HVAC monitoring systems. Monitor the operation and technical performance of HVAC and control equipment to ensure safe, efficient, and reliable operation. Follow up with technical teams to ensure maintenance and operational activities are completed effectively and according to established plans. Identify requirements for spare parts, equipment, and technical supplies and prepare the relevant technical specifications. Prepare technical studies and research aimed at improving HVAC system performance, energy efficiency, reliability, and maintenance practices. Develop and propose preventive maintenance, operation, and repair plans for central HVAC and automatic control systems. Prepare the budget for central HVAC and automatic control works and participate in relevant budget review and approval committees. Identify training and development needs for technical staff and propose relevant training programs in coordination with the Organization & Administration Department. Participate in technical committees, including chairing selection committees for technicians and skilled workers specialized in central HVAC and automatic control systems. Exercise assigned financial and administrative responsibilities in accordance with applicable laws, regulations, and delegated authorities. Contribute to staff performance evaluations and manage assigned administrative matters, including leave requests, within delegated authority.<br>Key Requirements Education: Bachelor’s degree or relevant higher engineering qualification in Mechanical Power Engineering. From Zero to 2 years of Exp Professional Registration: Registration with the Engineers Syndicate is required. Experience: Relevant experience in central HVAC systems, chiller plants, automatic control systems, and/or BMS is highly preferred. Technical Knowledge: Strong understanding of central air conditioning systems, HVAC operation and maintenance, chillers, AHUs, substations, and automatic control systems. BMS Experience: Practical experience with Building Management Systems (BMS) and HVAC control systems is a strong advantage. Engineering Applications: Proficiency in relevant engineering and computer applications is required. Leadership: Ability to supervise technical teams, coordinate contractors, and manage maintenance activities. Languages: Good command of English. Other: Candidates must successfully pass the required qualifying assessments for the position.

O&M Engineer (Wind Turbines) Location: Ra’s Gharib, Ras Gharib Company: Goldwind Work Arrangement: Site-Based (Rotation Schedule) Position Overview The O&M Engineer is responsible for performing operation and maintenance (O&M) activities for wind turbine generators (WTGs) in accordance with project schedules, company standards, and HSE requirements. This role includes preventive and corrective maintenance, troubleshooting, inspections, retrofits, reporting, and customer coordination to ensure the safe and reliable operation of wind farms. Key Responsibilities Operations & Maintenance Perform preventive and corrective maintenance on wind turbine generators (WTGs) in line with company procedures and project schedules. Diagnose and troubleshoot electrical, mechanical, hydraulic, and software-related faults. Replace defective components and complete defect-elimination tasks to restore turbine availability. Conduct scheduled inspections, retrofits, and technical upgrades. Analyze turbine operational data to identify trends and support performance optimization. Execute pre-Commercial Operation Date (pre-COD) activities, including completion checklist reviews and documentation verification. Carry out post-COD inspections and unscheduled maintenance activities. Site Supervision & Coordination Monitor and inspect installation contractors to ensure compliance with technical and quality standards. Coordinate with customers regarding completed services, planned maintenance, and technical issues. Prepare and submit accurate maintenance reports and service documentation. Inventory & Administration Manage spare parts, tools, and consumables inventory. Raise material requisitions and ensure timely availability of critical components. Maintain proper records of maintenance activities, inspections, and technical reports. Health, Safety & Environment (HSE) Strictly comply with company and site HSE policies and procedures. Identify, report, and mitigate workplace hazards. Report incidents and near misses accurately and promptly. Participate in HSE meetings, audits, and safety initiatives. Other Duties Support additional tasks and projects assigned by management. Qualifications & Experience Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related discipline.1–3 years of experience in wind turbine operation and maintenance or in a similar industrial environment. Strong knowledge of electrical, mechanical, hydraulic, and control systems. Ability to read and interpret technical drawings, schematics, and manuals. Experience with SCADA systems and data analysis is preferred. Good command of English (written and spoken) MUST Valid driving license and willingness to travel and work in remote site locations. Ability to work at heights and in demanding weather conditions. Preferred Certifications GWO (Global Wind Organisation) certifications are highly preferred Key Competencies Problem-solving and analytical thinking Strong communication and teamwork Customer-oriented mindset Ability to work independently under pressure Commitment to safety and quality

Company Description<br>Max AB is the fastest-growing B2B business in the retail industry in Egypt. Established in 2018 as an E-commerce platform allowing local underserved merchants and mom-and-pop shops in Egypt and Morocco to grow, increase their revenues, and enhance their own quality of life. Max AB strives to empower retailers who want to maximize their revenues. In addition to its e-commerce services, Max AB introduced Max AB Cash in 2021. Max AB Cash is a fintech service that enables local merchants to accept payments for various services that their end customers may require. This feature allows retailers to offer a more comprehensive shopping experience to their customers by facilitating secure and convenient payment transactions. Driven by our merchant-obsessed mindset and our sense of social responsibility, we are working our way to achieving sustainable development goals while creating a socially responsible business that makes the world a better place where everyone can be included<br><br>Key Responsibilities Leadership & Team Management Lead, supervise, and develop the Facility Maintenance Team across all operational regions. Allocate manpower and distribute maintenance activities according to operational priorities. Monitor team performance and ensure compliance with company policies, KPIs, and maintenance standards. Provide technical guidance, coaching, and on-the-job support to maintenance technicians. Maintenance Operations Manage and monitor all maintenance requests received through Jira, ensuring timely completion within the agreed SLA. Plan, schedule, and supervise preventive, corrective, and emergency maintenance activities. Conduct routine inspections of warehouses and administrative facilities to ensure operational readiness. Ensure the continuous availability and reliability of all building systems and facility infrastructure. Facility & Asset Management Supervise the installation, relocation, dismantling, and commissioning of warehouse assets and equipment. Maintain warehouse infrastructure, including civil works, electrical systems, plumbing systems, HVAC systems, lighting, and ventilation equipment. Oversee maintenance activities for water purification stations, water coolers, and drinking water systems. Supervise maintenance of manual material handling equipment, including Hand Pallet Trucks. Coordinate construction, renovation, warehouse modifications, and fit-out projects. Planning & Coordination Coordinate maintenance activities with Operations, Supply Chain, Procurement, IT, Security, Finance, and HSE departments. Prepare maintenance schedules to minimize operational downtime. Manage contractor activities and verify work quality according to company standards. Asset & Spare Parts Management Monitor maintenance spare parts inventory and ensure material availability. Optimize utilization of maintenance tools, equipment, and company assets. Participate in fixed asset relocation, installation, inventory verification, and condition assessments. Reporting & Documentation Prepare maintenance reports, technical assessments, and performance analysis. Monitor maintenance KPIs and recommend continuous improvement initiatives. Maintain accurate maintenance records, asset history, and documentation. Health, Safety & Compliance Ensure all maintenance activities comply with Occupational Health & Safety (HSE) requirements. Promote safe work practices and maintain compliance with company policies and regulatory requirements.<br>Core Responsibilities Summary Facility Maintenance Management Preventive & Corrective Maintenance Civil Works Supervision HVAC Maintenance Electrical & Plumbing Maintenance Warehouse Infrastructure Management Water Station Maintenance Hand Pallet Equipment Maintenance Asset Relocation & Installation Contractor Management Maintenance Planning & Scheduling Spare Parts Management Budget & Cost Control Support KPI Monitoring & Reporting Cross-Functional Coordination Team Leadership & Performance Management Health, Safety & Compliance

About Schneider Electric Schneider Electric is a global energy technology leader, driving efficiency and sustainability by electrifying, automating, and digitalizing industries, businesses, and homes.<br>Our technologies enable buildings, data centers, factories, infrastructure, and grids to operate as open, interconnected ecosystems, enhancing performance, resilience, and sustainability. Our portfolio includes intelligent devices, software-defined architectures, AI-powered systems, digital services, and expert advisory.<br>With 160,000 employees and one million partners in over 100 countries, Schneider Electric is consistently ranked among the world’s most sustainable companies.<br>Join our Global Supply Chain team as a Procurement Engineer and help drive supplier excellence, business continuity, and procurement strategy within our Engineering-to-Order (ETO) organization. You'll play a key role in developing strategic supplier partnerships, optimizing procurement performance, and contributing to innovative, sustainable supply chain solutions. This is a 1-year project-based opportunity.<br>What will you do? Manage supplier relationships and act as the main point of contact for your assigned supplier portfolio Collaborate with Category Managers to implement procurement strategies and annual operational plans Drive supplier development initiatives to improve competitiveness, quality, and business continuity Negotiate framework agreements and support cost optimization initiatives Monitor supplier performance, identify improvement opportunities, and mitigate supply risks Partner with cross-functional teams to ensure supplier readiness and support key customer projects Contribute to productivity initiatives and continuous improvement across procurement processes What are the key skills we are looking for? Supplier Relationship Management Procurement & Strategic Sourcing Negotiation & Influencing Skills Supply Chain & Business Continuity Management Analytical & Problem-Solving Skills Strategic Thinking & Business Acumen Stakeholder Collaboration & Cross-functional Communication Digital Mindset & Continuous Improvement Customer Focus & Change Management<br>What qualifications will make you successful? Bachelor's degree in mechanical or electrical engineering3-5 years of experience in Procurement, Supply Chain, or a related field A degree or certification in Procurement or Supply Chain is a plus Proficiency in Microsoft Office, especially Excel, Word, and Power Point Familiarity with AI tools and digital technologies is an advantage Excellent communication, negotiation, and stakeholder management skills Strong analytical mindset with the ability to manage multiple priorities in a fast-paced environment<br><br>Looking to make an IMPACT with your career? When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values—Inclusion, Mastery, Purpose, Action, Curiosity, and Teamwork—start with us. IMPACT is also your invitation to join Schneider Electric, where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world. We are looking for IMPACT Makers—exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one.

Role Description The Presales Engineer at Egyptian Co. For Electrical Equipment (ECEE) is a full-time, on-site role based in Cairo. The role involves working closely with the sales team to understand customer requirements, design technical solutions, and prepare proposals and presentations that align with client needs. Day-to-day tasks include conducting product demonstrations, supporting tender responses, preparing technical documentation, and coordinating with engineering teams to ensure feasibility and proper integration of solutions. The Presales Engineer also provides technical guidance during customer meetings, responds to technical inquiries, and supports post-sale handover to implementation and support teams. The role requires regular collaboration with internal stakeholders to maintain up-to-date knowledge of products, industry standards, and security best practices related to electrical equipment and systems. The candidate should also be able to maintain a strong relationship with vendors and suppliers to ensure the best prices and services are offered. Qualifications Strong presales and sales skills, including experience gathering customer requirements, preparing proposals, and delivering technical presentations. Technical support and integration skills to assist customers with solution design, troubleshooting, and seamless integration of electrical equipment and related systems. Knowledge of security considerations and standards relevant to electrical equipment and industrial systems, with the ability to address customer concerns and compliance requirements. Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related technical field. Ability to communicate complex technical concepts clearly to both technical and non-technical stakeholders, in English and Arabic. Strong problem-solving skills, attention to detail, and the ability to work collaboratively with cross-functional teams on-site in Cairo. Previous experience in a presales, technical sales, or application engineering role within electrical equipment, power systems, or industrial solutions is an advantage.3-5 years of experience in LOW CURRENT systems, CCTV, Access Control Presentable Hard-working Excellent command of Microsoft Office (Word, Excel, and Outlook) and web browsing. Strong negotiation skills with vendors and suppliers, risk assessment and handling. Fluent English, written and spoken.<br><br>Description:Prepare Technical offers (introduction, BOQ, solution description, Drawings, Time Plan, etc.)Preparing client quotations as per collected BOQ and specifications to approving the quotations. Create the best solutions with Sales Team and technical support Preparing the technical/commercial proposals for customers as well as maintaining all documentation of such proposals and related contracts with accurate pricing and configurations. Work closely with the client and sales team to identify their needs and scope Identifying market trends and new technologies to grow revenue/commercial opportunities. Contacting with clients to revise clients' requirements in order to prepare solutions and price offers. Following up with clients and sales team Choose the correct products and full-round system for the site survey Identify alternatives if products are not available to complete the project

Job Summary<br>The Procurement Supervisor – Electromechanical will be responsible for managing and supervising the procurement activities related to electromechanical materials, equipment, and services. The role involves sourcing qualified suppliers, negotiating commercial terms, ensuring timely delivery, and maintaining cost-effective procurement processes while meeting project specifications, quality standards, and schedules.<br>Key Responsibilities<br> Supervise and manage procurement activities for electromechanical materials, equipment, and services.<br> Develop and implement procurement strategies in line with project requirements and company policies.<br> Source, evaluate, and qualify suppliers and subcontractors for electromechanical requirements.<br> Review technical specifications, BOQs, RFQs, and material requirements before initiating procurement activities.<br> Coordinate with Engineering, Technical Office, Projects, Planning, and Commercial teams to ensure procurement requirements are clearly defined.<br> Prepare and issue RFQs, compare supplier quotations, and conduct commercial evaluations.<br> Negotiate prices, payment terms, delivery schedules, warranties, and other commercial conditions.<br> Ensure materials and equipment are procured according to approved specifications, quality standards, and project schedules.<br> Monitor purchase orders and supplier performance to ensure on-time delivery.<br> Follow up on material submittals, approvals, inspections, and delivery schedules.<br> Maintain strong relationships with suppliers and identify alternative sources when required.<br> Monitor market prices and market trends for electromechanical materials and equipment.<br> Support cost-saving and value-engineering initiatives.<br> Review procurement documentation and ensure compliance with company procedures.<br> Coordinate with the Finance team regarding payment terms, invoices, and supplier settlements.<br> Prepare procurement reports, supplier evaluations, and status updates for management.<br> Supervise and guide procurement engineers and coordinators within the team.<br> Resolve procurement-related issues and escalate critical delays or commercial risks when necessary.<br><br><br><br>Requirements<br><br>Qualifications & Requirements<br> Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or a related field.<br> Minimum 5 years of experience in Electromechanical Procurement, preferably within construction, MEP, contracting, or engineering companies.<br> Strong knowledge of electromechanical materials, equipment, and MEP systems.<br> Experience in procurement of items such as HVAC equipment, pumps, motors, generators, transformers, electrical panels, cables, fire-fighting systems, plumbing materials, and related MEP equipment.<br> Strong experience in supplier sourcing, quotation analysis, commercial negotiation, and purchase order management.<br> Good understanding of technical specifications, BOQs, drawings, and project requirements.<br> Experience dealing with local and international suppliers and subcontractors.<br> Strong negotiation, communication, and interpersonal skills.<br> Good knowledge of procurement procedures, contracts, and commercial terms.<br> Strong analytical and problem-solving skills.<br> Ability to manage multiple procurement activities and meet tight project deadlines.<br> Good command of Microsoft Office, especially Excel; knowledge of ERP/procurement systems is preferred.<br> Good command of English.<br> Strong leadership and team-management skills

MB Industrial for Electrical and Panels is hiring a “Material Planning Engineer"at Sadat city. To plan, analyze, and control raw material requirements in line with production plans and business demand, ensuring optimum material availability and inventory levels. The Material Engineer is responsible for MRP analysis, inventory optimization, material risk management, planning parameters, and making recommendations and decisions to prevent material shortages and minimize excess inventory. Responsibilities:Material Planning & MRPPlan material requirements based on production and demand. Analyze MRP results and identify material gaps and risks.<br>Inventory Optimization Monitor inventory levels and planning parameters. Control excess, slow-moving, and obsolete materials.<br>Shortage & Risk Management Monitor material shortages and production impact. Develop recovery plans and escalate critical risks.<br>Purchasing & Supplier Coordination Review POs against material requirements. Coordinate with Purchasing on delivery risks and priorities.<br>SAP / ERP Planning Maintain and review MRP planning parameters and master data. Analyze system exceptions and take corrective actions.<br>Production Support Ensure material availability for production. Assess material impact of plan changes and rush orders.<br>Reporting & Analysis Analyze material and inventory performance. Prepare management reports and improvement recommendations. <br>Qualifications:Bachelor's degree in Engineering, Industrial Engineering, Supply Chain Management, or a related field.2–5 years of relevant experience in Material Planning, Production Planning, Supply Chain, or Inventory Management. Manufacturing experience is preferred. Strong knowledge of MRP, Material Planning, and Inventory Management. Advanced Microsoft Excel skills and good knowledge of SAP/ERP systems. Strong analytical, problem-solving, decision-making, and risk assessment skills. Good understanding of manufacturing processes and material planning principles. Strong communication and coordination skills. Ability to analyze material shortages, inventory levels, MRP results, and supplier performance. Ability to recommend planning parameter changes, material priorities, and purchase requirements. Ability to identify and escalate critical material risks and initiate corrective actions. Understanding of key material planning and inventory performance indicators is required.

We are looking for an experienced MEP Inspector to join our team for a 1-year construction project.<br>Position: MEP Inspector Experience: 7 years of relevant experience Project Duration: 1 year Working Days: 6 days per week Working Hours: 10:00 AM – 5:00 PMLocations: 6th of October – North Coast – new cairo<br>Key Responsibilities:Inspect MEP works at the construction site and ensure compliance with approved drawings and specifications. Monitor the installation and execution of Mechanical, Electrical, and Plumbing (MEP) works. Conduct site inspections and identify any deviations or non-conformities. Review inspection requests, materials, and installation quality. Coordinate with contractors, consultants, and project teams to resolve technical and quality issues. Follow up on corrective actions and ensure proper closure of observations. Maintain inspection reports and relevant project documentation. Requirements:Bachelor’s degree in Mechanical or Electrical Engineering.7 years of relevant experience in MEP inspection/site supervision. Good knowledge of MEP installations, construction drawings, and technical specifications. Previous experience working on construction sites. Good communication and coordination skills.

Duties & Responsibilities:Sell CRAC, RAC, UPS, and all Data Center components, and generate sales opportunities within the assigned sector to achieve customer satisfaction and sales targets. Plan and organize weekly sales activities in coordination with the Sales Manager to effectively cover the assigned customer list and follow up on pending deals. Identify and prospect new customers who may have an interest in the company's products and solutions (VERTIV). Visit customers to present Vertiv products and respond to technical and commercial inquiries. Participate in preparing quotations, reviewing tender documents, and proposing payment terms for management approval. Attend tender meetings and clarify all related technical and commercial questions. Coordinate and liaise with consulting engineers whenever required to support project opportunities. Conduct customer background investigations and market assessments when requested. Present technical catalogs, publications, and drawings to customers, demonstrating the advantages of Vertiv products and solutions. Support and participate in the delivery and handover of UPS, CRAC units, and Data Center solutions to customers when needed. Monitor competitors' products, pricing, and commercial terms, and report findings in writing to management. Collaborate with the After-Sales team to exchange information and coordinate customer support activities. Prepare daily activity reports and escalate any challenges or issues to the Sales Manager for timely resolution.<br>Qualifications:Experience with UPS, CRAC units, Data Center, and electrical equipment. Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field.3–5 years of experience in technical sales, preferably with UPS / CRAC units / Data Center. Proven track record of achieving sales targets within the engineering or industrial equipment sector. Excellent communication, negotiation, and presentation skills. Willingness to travel to client sites and project locations as needed. Proficiency in MS Office. Strong problem-solving skills and a customer-oriented mindset. Ability to work independently and as part of a multidisciplinary team. Owning a car is required.<br><br>Send your CV @ careers@onspec.net

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>·</span></span><span><span>Implement cost control plans on time and coordinate with the project managers, technical offices and tender department for collecting all data and required documents and making sure it is correct.</span></span></p><br><p><span><span>·</span></span><span><span>Study and analyze items of technical works, the stages and period of project implementation, project needs, lists of quantities and other cost elements, prepare tables of cost estimate and balance of project implementation and submit it to the line manager for revising.</span></span></p><br><p><span><span>·</span></span><span><span>Study the items of direct and indirect costs for identifying cost centers according to that and upload the expense items on its cost center and review it with the line manager.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare the reports of project cost control, including statements of project estimated costs compared to the actual costs, submit the reports to the line manager, analyze deviations, explain the reasons for the expected risks and suggest the corrective and preventive actions to be taken.</span></span></p><br><p><span><span>·</span></span><span><span>Follow-up with project managers the position of projects towards the timelines, requirements and new work items, study the effect of that on direct and indirect expenses and update project balances according to the line manager directions.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare reports that include the comparisons between the actual prices for project needs and the specified price at studies explaining deviations and its effects and coordinate with a procurement department to study the ability of cost control.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare an integrated and updated database includes the costs of every project element to be a reference for the estimation of the future project costs.</span></span></p><br><p><span><span>·</span></span><span><span>Help the line manager to prepare the reports and final statistics that reflect the final costs of technical work items of the project.</span></span></p><br><br><br> <p><span><span><strong>Minimum</strong></span></span></p><br><br><p><span><span>- </span></span><span><span>Years of experience:</span></span></p><br><p><span><span>1-3 years</span></span></p><br><br><p><span><span>- Academic Qualifications:</span></span></p><br><p><span><span>BSc. Engineering (Construction Management, Civil/Mech./Electrical)</span></span></p><br><br><p><span><span>- Professional Certificates:</span></span></p><br><br><p><span><span>- Language proficiency:</span></span></p><br><p><span><span>Intermediate in English</span></span></p><br><br><p><span><span>- Computer skills:</span></span></p><br><p><span><span>MS Office / ERP</span></span></p><br><br><br> </div>

Administrative Tasks Related to Accommodation:Supervision of New Accommodation Lease Requests:Search for suitable accommodation options with appropriate rental values according to job categories, as per company policies and regulations. Prepare a new lease contract to be signed by both the landlord and the tenant. Prepare a payment request with all supporting details and submit it to the Finance Department to release the first installment for renting the unit. Administrative Tasks Related to Transportation:Supervision of New Vehicle Lease Requests from Projects:Verify employee names, codes, and job titles with the HR Department. Search for a suitable vehicle and appropriate rental value (after obtaining three quotations from different suppliers) according to the job category, as per company policies and regulations. Inform the Project Manager and the supplier of the vehicle handover and operation date. Preparation of New Lease Contracts to Be Signed by Both the Lessor and the Lessee:Deliver the vehicle to the project or the employee as per company policy and delivery forms. Follow up on daily vehicle operations with project administrators. Review of Monthly Vehicle Reports Received from Sites and Match Them with E-Invoices and Contracts:Prepare monthly rental claims and follow up on cheque issuance with the Finance Department and suppliers. Monitor Drivers’ Custody and Verify Expenses; Conduct Monthly Reconciliations and Inventory of All Vehicles Allocated to Engineers and Managers, Including Fuel, Parking, Maintenance, and Other Expenses. Record reconciliations and contracts in the SAP system (Create Contracts / Entry Sheet). Conclude vehicle renewal contracts after obtaining the necessary approvals. Prepare monthly reports and inventory of all vehicles available and in use in projects (monthly update of beneficiary lists for vehicles – private cars, minibuses, and buses). Monitor daily vehicle movement and ensure smooth operations to avoid any disruptions. Monitor employees’ fuel cards, prepare related claims, receive invoices, and reconcile them with Finance. Archive and organize all vehicle and transportation-related documents. Coordinate with different departments to provide vehicles for visits and assignments. Receive new vehicles from suppliers, inspect them, and hand them over to the concerned users with the approved forms. Return vehicles to suppliers upon contract expiry or termination using the approved forms. Utilize administration vehicles to transport and deliver materials to projects when required. Monitor maintenance of company-owned vehicles (authorized dealers and periodic servicing). Follow up and renew licenses for company-owned vehicles. Arrange and organize employee travel and provide appropriate transportation. Monitor drivers’ daily operations and ensure their compliance with transportation plans and uniform policy. Administrative Tasks in Facilities Management:Monitor electricity and water meter balances, including recharging meters for main buildings. Handle daily management and disbursement of pantry supplies (tissues, water, hospitality items, etc.), monitor stock levels, and reconcile petty cash with Finance. Purchase building maintenance supplies and settle related invoices. Follow up on visits of contracted maintenance companies (elevators, generators, fire-fighting systems, etc.). Monitor subscriptions for landline phone services and internet connections. Arrange hospitality for visitors and organize meeting venues. Supervise the contracted cleaning company (attendance, departure, and service quality). Oversee waste management contracts and ensure regular collection. Monitor and maintain indoor plants in coordination with the landscaping company. Prepare and supervise office fit out works (gypsum board, painting, office furnishings) and work on improving the efficiency of administrative buildings. Follow up on air-conditioning maintenance and conduct regular inspections of buildings to ensure operational efficiency.