وظائف حارس أمن - المنوفية مصر

Main Responsibilities and Tasks: First: Operations Operate and stop the cooling plant according to approved operating procedures Monitor the operation of compressors, condensers, evaporators, and ammonia pumps Continuously monitor system pressures and temperatures Monitor oil levels and oil separators Monitor ammonia levels inside vessels and tanks Record all daily operation readings Ensure stability of temperatures in cold rooms and production areas Monitor the efficiency of cooling towers and water cycles Second: Maintenance Perform preventive maintenance according to the maintenance plan Carry out corrective maintenance for emergency faults Replace oils, filters, and spare parts as needed Inspect valves, control devices, and measuring instruments Identify causes of faults and take corrective actions Ensure the safety of ammonia pipelines, connections, and welding. Maintain equipment efficiency and extend its operating life Third: Handling of Ammonia Full familiarity with properties of liquid and gaseous ammonia Safe handling of ammonia during operation and maintenance Perform ammonia charging, unloading, and transportation operations according to approved procedures Execute Pump Down operations when needed Detect ammonia leaks and respond immediately Ensure the safety of safety valves and isolation valves Adherence to all instructions for handling industrial ammonia Additional Details • Number of vacancies: 3 • Shift system: morning and evening • Benefits: health insurance, social insurance, transportation allowance, housing, overtime

The general manager of a group of companies is the highest executive leadership authority overseeing operational, strategic, and financial aspects of several affiliated companies. His responsibilities include directing strategic plans, managing budgets, aligning the performance of the companies with the group's objectives, and guiding senior management teams to achieve sustainable growth. Main tasks and responsibilities: Strategic Planning: Developing long- and short-term plans that ensure growth and expansion across all group-affiliates. Operations Management: Supervising activities (feed, poultry, agricultural sector) and daily operations to ensure high-efficiency workflow in line with the highest quality standards. Feed Plant Production Management: Overseeing plant managers to ensure efficient feed production lines (poultry, livestock) with the highest quality standards at the lowest cost. Supply Chain and Procurement: Securing raw material sources (corn, soy, feed additives) globally and locally, and managing inventory efficiently. Quality and Safety Management: Adopting strict policies for feed quality control and compliance with animal health and biosecurity standards. Business Development and Sales: Opening new markets, supporting the sales team, and following up on collections and contracts. Agricultural Management: Supervising production cycles, monitoring irrigation, fertilization, and pest control programs to ensure crop quality. Poultry Production Management: Full supervision of all sites (poultry farms) to ensure smooth operations in line with plans, and strict biosafety protocols to protect flocks from diseases, ensuring products meet global health standards. Financial Management: Monitoring financial performance and managing the group’s overall budget, as well as analyzing financial reports to increase returns and reduce costs. Team Leadership: Directing the staff to ensure smooth workflow and organization. Risk Management: Identifying and assessing investment and operational risks, and developing proactive plans to address and overcome them. Required Skills and Qualifications: Degree: Bachelor’s or Master’s in Accounting Professional Experience: Extensive proven leadership experience in managing groups of companies or executive departments, not less than 15 years. Leadership Skills: Ability to motivate and manage teams and make sound decisions under pressure. Analytical Thinking: Strong data analysis skills and forecasting economic and market trends. Administrative Skills: Negotiation and excellent communication skills, strong financial analysis and planning abilities. <details><strong>Additional Details</strong></p> <ul><li>Number of vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social security, transportation allowance, meals, housing</li></ul>

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Operation and Maintenance Engineer is reporting to the Plant Head (Facility Manager or his delegate). He is responsible for the day-to-day operation of the PHGs 250 SMRs units, H2 compressor and backup system based on the Air Products Ain Sokhna.<br><br>Working alongside the AP personals at site and country to ensure the smooth and reliable operation and maintenance of all aspects of the Air Products Ain Sokhna facility.<br><br>Nature and Scope<br><br>St Gobain site in Al Ein Sokhna is Air Products 3rd fully owned and operated plant in Egypt.<br><br>The Plant Consists Of<br><br>2 x PHG250 small Steam Methane Reformers (SMR). H2 compressor. Backup system<br><br>The customer is St Gobain. The Air Products plant is located within the customer’s site. The products from the Air Products plants go directly to the mix station that AL is mixing with N2 before sending to St Gobain area. There is a high level of integration between St Gobain and Air Products with respect to feedstock’s, products and utilities. The products are critical to Glass plant operations.<br><br>The plants run on continuous basis and there is a strong emphasis of high reliability and high efficiency.<br><br>Principal Responsibilities<br><br>Understand all relevant EH&S regulations applicable to the facility and develop plans on how they will be implemented at the facility to ensure compliance. Understand and implement Air Products EH&S work processes including emergency preparedness and incident management. Report, and where possible, eliminate all potential hazards by using the Air Products Basic Safety Practice (BSP) system. Regularly participate in site and operations safety meetings to ensure all safety related issues are identified, discussed, understood and then successfully resolved. As part of the on call team, responsible for the security and safety of site, liaise with the customer as appropriate. Maintain company rules for discipline, punctuality, absenteeism, etc.,Maintain good housekeeping and tidiness in the facility. At all times wear appropriate Personal Protective Equipment (PPE). Support of all aspects of the day-to-day operation of the H2 plant, including troubleshooting plant process problems, carrying out the daily plant activities and participating in the plant projects. Ensure that customer requirements are met at all times, by direct liaison and administration of the site quality procedures. Working with AP personals at site and support resources to achieve productivity targets.have expert knowledge of and to operate and maintain all systems, identified under job dimensions’ section so that the optimum performance and reliability is achieved at all times. Make entries into plant logbook to include all operating data, messages, unusual events, work done & spares used. Liaise with personnel oncoming to site to communicate plant conditions, work instruction; existing work permits in force etc. Collect production data, check for errors or signs of plant problems. Be able to resolve discrepancies prior bringing to the attention of Facility Manager. Carry out routine and specific work tasks as directed by Facility Manager or his delegate and to be able to identify work required. Start, stop and isolate equipment and unit processes as required. To be fully conversant with all modifications carried out on site as the plant/customer requirements dictate. As and when possible, learn to operate any other plants in the facility to allow more flexibility in working arrangements. During plant shutdowns maintain overall control of safety and operation on the plant. Provide assistance and support to the team performing the maintenance. Provide technical, operational and trouble-shooting assistance at the facility as and when required. Ensure that routine maintenance as designated by the SAP PM system and non-routine maintenance as and when required, is diligently performed to the necessary standards, utilizing the resources within the plant and outside resources where required (contract labor / outside technicians). Work with minimal supervision on the Air Products, site - designated continuous shift or “On – Call” system. This requires working and managing all job activities, for periods of time up to and beyond a full shift period, when circumstances make this necessary. Respond to critical alarm dial outs from the Plant (or by other contact from customer etc) by remote connection to site to ensure product supplies remain on line to customer as required. Carry out remote start-up of Plant/equipment as and when required during period On Call. Provide cover as required and when available. To be able, as required, to stand in for the Facility Manager should circumstances make this necessary.<br><br>Minimum Requirements<br><br>Bachelor degree in Instrumentation/Electrical Engineering. Minimum 5 years’ experience in gas, petrochemical, or related industries. Excellent Communication & coordination skills. Fluent oral English and excellent written English.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.