وظائف مهندس تسعير مناقصات - أسيوط مصر

Job Description: Mechanical Engineer – Thermal Insulation & Cladding<br>Experience Required: Minimum 10 years in Mechanical construction, up to 5 years in Insulation Location: Asyut Working days: 6 Days Working Hours: 8 Hours<br>Job Summary<br>The Mechanical Engineer – Thermal Insulation & Cladding is responsible for the engineering, planning, execution, inspection, and technical supervision of thermal insulation and protective cladding works across heavy industrial projects.<br>The role covers hot insulation systems for piping, equipment, tanks, vessels, boilers, ducts, and other industrial assets. The engineer will ensure that insulation and cladding works comply with project specifications, approved drawings, applicable standards, quality requirements, safety procedures, budgets, and project schedules.<br>key Responsibilities<br>Engineering and Technical Responsibilities:<br>* Review project specifications, drawings, piping isometrics, equipment layouts, data sheets, insulation schedules, and bills of quantities.* Select appropriate insulation systems based on operating temperature, process conditions, environmental exposure, energy-conservation requirements, and fire and safety considerations.* Prepare and review insulation and cladding specifications, material take-offs, technical submittals, method statements, inspection and test plans, and installation procedures.* Determine the required insulation material, thickness, density, vapor barriers, weatherproofing systems, fastening arrangements, and cladding materials.* Provide technical solutions for hot-service, cold-service, cryogenic, acoustic, anti-condensation, and personnel-protection applications.* Develop insulation details for piping fittings, valves, flanges, supports, vessels, tanks, ducts, boilers, turbines, and other industrial equipment.* Review vendor and subcontractor technical offers and verify compliance with project specifications.* Support cost estimation, tender preparation, quantity verification, variation orders, and technical-commercial evaluations.* Identify insulation interfaces and potential clashes with piping, structural steel, equipment, electrical systems, and instrumentation.<br>Site Execution and Supervision:<br>* Plan and supervise insulation and cladding activities at construction and operating industrial sites.* Coordinate daily activities with construction teams, subcontractors, planners, QA/QC personnel, HSE teams, and client representatives.* Ensure that surfaces are properly prepared and released before insulation installation.* Verify the correct installation of insulation materials, vapor barriers, sealants, expansion joints, support systems, removable insulation covers, and metal cladding.* Supervise the fabrication and installation of aluminium, stainless-steel, and galvanized-steel cladding.* Monitor workforce productivity, material consumption, work progress, and subcontractor performance.* Resolve technical and site-related problems and provide practical corrective solutions.* Coordinate insulation activities during plant shutdowns, turnarounds, maintenance campaigns, and time-critical projects.* Ensure that completed systems provide continuous insulation and adequate protection against weather, moisture ingress, mechanical damage, and corrosion under insulation.* Prepare progress reports, look-ahead plans, technical queries, site instructions, and completion documentation.<br> Quality and Inspection<br>* Inspect insulation and cladding works in accordance with approved drawings, specifications, method statements, and inspection plans.* Verify material certificates, approved manufacturers, batch information, storage conditions, and material traceability.* Conduct inspections covering insulation thickness, density, joint arrangement, fastening, sealing, vapor-barrier continuity, cladding overlap, water shedding, and workmanship.* Identify non-conformities, recommend corrective actions, and follow up until final closure.* Participate in client inspections, system handovers, punch-list clearance, and final acceptance.* Support investigations and preventive actions related to moisture ingress, insulation deterioration, heat loss, condensation, and corrosion under insulation.* Maintain inspection records, material reports, red-line drawings, and final project dossiers.<br>Health, Safety, and Environmental Responsibilities<br>* Ensure all activities comply with project HSE requirements and applicable site procedures.* Conduct or participate in risk assessments, job safety analyses, toolbox talks, and permit-to-work activities.* Promote safe practices for working at height, scaffolding access, confined spaces, hot surfaces, sharp metal cladding, and insulation-material handling.* Ensure the correct use of personal protective equipment and proper housekeeping within work areas.<br>Required Qualifications<br>* Bachelor’s degree in Mechanical Engineering from a recognized university.* Minimum 10 years of relevant experience in thermal insulation and industrial cladding.* Proven experience on heavy industrial projects such as power plants, refineries, petrochemical facilities, oil and gas plants, cement plants, fertilizer plants, steel plants, LNG facilities, or large process-industry projects.* Strong practical knowledge of insulation systems for piping, tanks, vessels, boilers, ducts, turbines, heat exchangers, and industrial equipment.* Demonstrated experience in both engineering review and site execution.* Experience managing insulation subcontractors, supervisors, foremen, technicians, and skilled workers.* Strong understanding of corrosion under insulation and moisture-prevention requirements.* Experience working on shutdowns, plant maintenance, or brownfield projects is highly preferred.* Good command of written and spoken English. Knowledge of Arabic or another project-relevant language is an advantage.<br> Required Technical Knowledge<br>The successful candidate should have practical knowledge of:<br>* Hot insulation systems.* Mineral wool, rock wool, glass wool, calcium silicate, cellular glass, perlite, aerogel, elastomeric foam, PIR, PUR, and ceramic-fibre insulation.* Aluminium, stainless-steel, and galvanized-steel cladding systems.* Vapor barriers, weather barriers, mastics, sealants, membranes, fastening systems, support rings, and expansion joints.* Removable and reusable insulation covers for valves, flanges, turbines, and equipment requiring maintenance access.* Insulation thickness calculations, heat-loss control, surface-temperature control, and condensation prevention.* Material take-offs, quantity surveying, cost estimation, productivity calculations, and project planning.* Reading piping isometrics, general arrangement drawings, P&IDs, equipment drawings, and insulation schedules.* Relevant international standards and industry practices, including ISO, ASTM, BS, EN, CINI, NORSOK, or equivalent project-specific requirements.* Inspection procedures, non-conformance reporting, punch-list management, and project handover requirements.<br>Software Skills<br>* Advanced proficiency in Microsoft Excel and Microsoft Office.* Good working knowledge of Auto CAD.* Ability to review 3D models using Navisworks or similar software is preferred.* Experience with Primavera P6 or Microsoft Project is an advantage.* Familiarity with thermal-insulation calculation or heat-transfer software is preferred.<br>Core Competencies<br>* Strong technical judgment and practical problem-solving ability.* Leadership and supervision of multidisciplinary and subcontractor teams.* Excellent planning, coordination, and progress-monitoring skills.* Strong attention to detail and commitment to quality.* Ability to work effectively under shutdown and project schedule pressure.* Commercial awareness and cost-control capability.* Clear technical reporting and stakeholder communication.* Ability to coordinate effectively with clients, consultants, vendors, and site teams.<br>Preferred Certifications<br>* Relevant QA/QC or industrial insulation inspection certification.* Project management or planning certification.* NEBOSH, IOSH, OSHA, or equivalent safety training.* Manufacturer training related to industrial insulation and cladding systems.

Job Description: Mechanical Engineer – Thermal Insulation & Cladding<br>Experience Required: Minimum 10 years Location: Asyut Working days: 6 Days Working Hours: 8 Hours<br>Job Summary<br>The Mechanical Engineer – Thermal Insulation & Cladding is responsible for the engineering, planning, execution, inspection, and technical supervision of thermal insulation and protective cladding works across heavy industrial projects.<br>The role covers hot insulation systems for piping, equipment, tanks, vessels, boilers, ducts, and other industrial assets. The engineer will ensure that insulation and cladding works comply with project specifications, approved drawings, applicable standards, quality requirements, safety procedures, budgets, and project schedules.<br>key Responsibilities<br>Engineering and Technical Responsibilities:<br>* Review project specifications, drawings, piping isometrics, equipment layouts, data sheets, insulation schedules, and bills of quantities.* Select appropriate insulation systems based on operating temperature, process conditions, environmental exposure, energy-conservation requirements, and fire and safety considerations.* Prepare and review insulation and cladding specifications, material take-offs, technical submittals, method statements, inspection and test plans, and installation procedures.* Determine the required insulation material, thickness, density, vapor barriers, weatherproofing systems, fastening arrangements, and cladding materials.* Provide technical solutions for hot-service, cold-service, cryogenic, acoustic, anti-condensation, and personnel-protection applications.* Develop insulation details for piping fittings, valves, flanges, supports, vessels, tanks, ducts, boilers, turbines, and other industrial equipment.* Review vendor and subcontractor technical offers and verify compliance with project specifications.* Support cost estimation, tender preparation, quantity verification, variation orders, and technical-commercial evaluations.* Identify insulation interfaces and potential clashes with piping, structural steel, equipment, electrical systems, and instrumentation.<br>Site Execution and Supervision:<br>* Plan and supervise insulation and cladding activities at construction and operating industrial sites.* Coordinate daily activities with construction teams, subcontractors, planners, QA/QC personnel, HSE teams, and client representatives.* Ensure that surfaces are properly prepared and released before insulation installation.* Verify the correct installation of insulation materials, vapor barriers, sealants, expansion joints, support systems, removable insulation covers, and metal cladding.* Supervise the fabrication and installation of aluminium, stainless-steel, and galvanized-steel cladding.* Monitor workforce productivity, material consumption, work progress, and subcontractor performance.* Resolve technical and site-related problems and provide practical corrective solutions.* Coordinate insulation activities during plant shutdowns, turnarounds, maintenance campaigns, and time-critical projects.* Ensure that completed systems provide continuous insulation and adequate protection against weather, moisture ingress, mechanical damage, and corrosion under insulation.* Prepare progress reports, look-ahead plans, technical queries, site instructions, and completion documentation.<br> Quality and Inspection<br>* Inspect insulation and cladding works in accordance with approved drawings, specifications, method statements, and inspection plans.* Verify material certificates, approved manufacturers, batch information, storage conditions, and material traceability.* Conduct inspections covering insulation thickness, density, joint arrangement, fastening, sealing, vapor-barrier continuity, cladding overlap, water shedding, and workmanship.* Identify non-conformities, recommend corrective actions, and follow up until final closure.* Participate in client inspections, system handovers, punch-list clearance, and final acceptance.* Support investigations and preventive actions related to moisture ingress, insulation deterioration, heat loss, condensation, and corrosion under insulation.* Maintain inspection records, material reports, red-line drawings, and final project dossiers.<br>Health, Safety, and Environmental Responsibilities<br>* Ensure all activities comply with project HSE requirements and applicable site procedures.* Conduct or participate in risk assessments, job safety analyses, toolbox talks, and permit-to-work activities.* Promote safe practices for working at height, scaffolding access, confined spaces, hot surfaces, sharp metal cladding, and insulation-material handling.* Ensure the correct use of personal protective equipment and proper housekeeping within work areas.<br>Required Qualifications<br>* Bachelor’s degree in Mechanical Engineering from a recognized university.* Minimum 10 years of relevant experience in thermal insulation and industrial cladding.* Proven experience on heavy industrial projects such as power plants, refineries, petrochemical facilities, oil and gas plants, cement plants, fertilizer plants, steel plants, LNG facilities, or large process-industry projects.* Strong practical knowledge of insulation systems for piping, tanks, vessels, boilers, ducts, turbines, heat exchangers, and industrial equipment.* Demonstrated experience in both engineering review and site execution.* Experience managing insulation subcontractors, supervisors, foremen, technicians, and skilled workers.* Strong understanding of corrosion under insulation and moisture-prevention requirements.* Experience working on shutdowns, plant maintenance, or brownfield projects is highly preferred.* Good command of written and spoken English. Knowledge of Arabic or another project-relevant language is an advantage.<br> Required Technical Knowledge<br>The successful candidate should have practical knowledge of:<br>* Hot insulation systems.* Mineral wool, rock wool, glass wool, calcium silicate, cellular glass, perlite, aerogel, elastomeric foam, PIR, PUR, and ceramic-fibre insulation.* Aluminium, stainless-steel, and galvanized-steel cladding systems.* Vapor barriers, weather barriers, mastics, sealants, membranes, fastening systems, support rings, and expansion joints.* Removable and reusable insulation covers for valves, flanges, turbines, and equipment requiring maintenance access.* Insulation thickness calculations, heat-loss control, surface-temperature control, and condensation prevention.* Material take-offs, quantity surveying, cost estimation, productivity calculations, and project planning.* Reading piping isometrics, general arrangement drawings, P&IDs, equipment drawings, and insulation schedules.* Relevant international standards and industry practices, including ISO, ASTM, BS, EN, CINI, NORSOK, or equivalent project-specific requirements.* Inspection procedures, non-conformance reporting, punch-list management, and project handover requirements.<br>Software Skills<br>* Advanced proficiency in Microsoft Excel and Microsoft Office.* Good working knowledge of Auto CAD.* Ability to review 3D models using Navisworks or similar software is preferred.* Experience with Primavera P6 or Microsoft Project is an advantage.* Familiarity with thermal-insulation calculation or heat-transfer software is preferred.<br>Core Competencies<br>* Strong technical judgment and practical problem-solving ability.* Leadership and supervision of multidisciplinary and subcontractor teams.* Excellent planning, coordination, and progress-monitoring skills.* Strong attention to detail and commitment to quality.* Ability to work effectively under shutdown and project schedule pressure.* Commercial awareness and cost-control capability.* Clear technical reporting and stakeholder communication.* Ability to coordinate effectively with clients, consultants, vendors, and site teams.<br>Preferred Certifications<br>* Relevant QA/QC or industrial insulation inspection certification.* Project management or planning certification.* NEBOSH, IOSH, OSHA, or equivalent safety training.* Manufacturer training related to industrial insulation and cladding systems.

Company Description El Haggar Misr is a leading company in the air compressors business, established in 1977 and recognized as a trusted choice for compressed air solutions in Egypt. The company offers a wide range of products, including reciprocating compressors manufactured in cooperation with Rami in Italy, supporting businesses of various sizes. El Haggar Misr is the sole agent for Kaeser screw compressors and Camozzi pneumatic systems, backed by highly trained engineers and an authorized service center. The organization continues to expand its portfolio with advanced solutions such as high-quality Italian nitrogen generators, providing up to 99.9% pure nitrogen to meet evolving customer needs.???????????? ????????????????????????????????????????????????????????????????Sell and promote air compressors, air dryers, and related systems to industrial and commercial clients. Analyze customer technical requirements and recommend suitable solutions. Prepare technical proposals, quotations, and commercial offers. Deliver product presentations and technical discussions with customers. Manage the sales process from lead generation to deal closing. Coordinate with internal teams (technical, service, and operations) to ensure successful delivery. Build and maintain strong client relationships and expand market presence. Prepare regular sales reports and market updates.???????????????????????????????????????????????????????? & ????????????????????????????????????????????????:✔️ Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field✔️ Fresh graduates are welcome to apply✔️ Experience in selling air compressors and compressed air systems is an advantage✔️ Strong technical knowledge of air dryers and industrial equipment✔️ Valid driving license is required✔️ Willingness to conduct field visits and customer meetings✔️ Excellent communication, negotiation, and presentation skills✔️ Ability to work independently and achieve sales targets✔️ Applicants must be residents of the same required hiring locations

<p><strong>Handle sales, service and maintenance in Upper Egypt area</strong><br><br><strong>Sales:</strong></p><ul><li><p>Represent the company’s products and services.</p></li><li><p>Generating leads, contacting potential customers and building relationships to increase sales</p></li><li><p>Maintain working relationships with existing clients to ensure that they receive exceptional service and to identify potential new sales opportunities</p></li><li><p>Identify prospects, set appointments, make effective qualifying sales calls, and manage sales cycle to close new business in all service categories</p></li><li><p>Possess in-depth product knowledge and be able to conduct demos and handle objections</p></li><li><p>Prepare concise and accurate reports, proposals, booking packages, and other required documentation for executive-level presentations</p></li><li><p>Achieve sales goals by assessing current client needs and following a defined selling process with potential buyers, often including product demos and presentations</p></li><li><p>Coordinate with other sales representatives to ensure that quotas are being met and company standards are being upheld</p></li></ul><p>&nbsp;</p><p><strong>Requirements</strong></p><ul><li><p>Biomedical Engineer is must</p></li><li><p>Male / Female</p></li><li><p>Ability to cover Upper Egypt areas, starting from Al Minya to Aswan</p></li><li><p>Biomedical engineers - Physiotherapists </p></li><li><p>at least 3 years experience</p></li></ul><p></p>

<p>Job Description</p><ul><li><p>Job Summary The Senior Sales Engineer will be responsible for promoting and selling the company's CSSD &amp; Sterilization portfolio across Upper Egypt, developing new business opportunities, and maintaining strong relationships with hospitals and healthcare providers.</p></li></ul><p>Responsibilities</p><ol><li><p>Promote and sell CSSD &amp; Sterilization equipment to hospitals and healthcare facilities.</p></li><li><p>Develop new business opportunities and expand the customer base across Upper Egypt.</p></li><li><p>Conduct product presentations, demonstrations, and technical discussions.</p></li><li><p>Prepare quotations and negotiate commercial offers.</p></li><li><p>Follow up on sales opportunities until closing.</p></li><li><p>Build and maintain strong relationships with key decision-makers.</p></li><li><p>Coordinate with the application and service teams to ensure customer satisfaction.</p></li><li><p>Participate in conferences, workshops, and exhibitions.</p></li><li><p>Monitor market trends and competitor activities.</p></li><li><p>Prepare regular sales forecasts and activity reports.</p></li><li><p>Achieve assigned sales targets.</p></li></ol><p></p><p><strong>Requirements</strong></p><p></p><ul><li><p>Bachelor's degree in Biomedical Engineering, Pharmacy, Science, or a related field.</p></li><li><p>5–8 years of experience in CSSD &amp; Sterilization medical equipment sales.</p></li><li><p>Hands-on experience with one or more of the following products:</p></li></ul><ol><li><p>Steam Sterilizers (Autoclaves)</p></li><li><p>Hydrogen Peroxide Plasma Sterilizers</p></li><li><p>Washer Disinfectors</p></li><li><p>Ultrasonic Cleaners</p></li><li><p>CSSD Workstations</p></li><li><p>Packing &amp; Sealing Machines</p></li><li><p>Sterilization Containers &amp; Accessories</p></li></ol><p></p><ul><li><p>Strong understanding of CSSD workflow and sterilization standards.</p></li><li><p>Excellent communication, presentation, and negotiation skills.</p></li><li><p>Strong business development and key account management skills.</p></li><li><p>Ability to travel extensively across Upper Egypt.</p></li><li><p>Own a car with a valid driving license (Mandatory).</p></li><li><p>Must be a resident of <strong>Upper Egypt</strong>.</p></li><li><p>Good command of English.</p></li><li><p>Proficiency in Microsoft Office.</p></li></ul><p></p>