وظائف مهندس مواد

Overseeing and handling warranty claims in a way that guarantee introducing best service level, maintain and improve customer satisfaction level and raise customer loyalty and preserve company’s rights, Maintain spare parts level at preidentified quantities and quality levels.<br>Responsibilities• Monitor warranty budget and expenditures.• Review, investigate and approve warranty claims cases based on pre-identified policies and on timely basis.• Monitor, review and solve customer complains.• Review, investigate and handle cases related to customer protection agency till closed.• Train service, call center, sales, all stakeholder personnel on warranty policies and procedures, existing and new products.• Confer with suppliers by preparing, communicating and follow-up warranty claims and until product/spare parts replaced or value reimbursed.• Confer with logistics team and customs clearance to obtain and satisfy spare parts ordering requirements.• Monitor main warehouse/branches/3rd party spare parts stock and reordering.• Forecasting spare parts volume requirements based on sales/service plans. <br>Qualifications Education:• A minimum of Bachelor of engineering majored in electric/mechanics/electronics, post graduate education is preferred. Experience:• Up to 4 years’ experience in similar position.• Experience in appliances industry.

Job Responsibilities:Responsible for supervise all site activities at mobile network sites, ensuring that installation, maintenance, swap, and commissioning works are completed safely, efficiently, and in compliance with quality standards and project requirements. Install new power cabinets and battery banks. Perform swap activities for power cabinets and batteries. Install and replace Main Distribution Boards (MDBs). Install and connect DC and AC power cables. Install power meters and related power equipment. Troubleshoot and rectify power faults at sites. Installation and commissioning for MW links LOS & Power site survey<br>Required Qualifications:Bachelor's degree in Communications Engineering Minimum 3 years of experience in the mobile telecommunication field. Willingness to work full-time and travel frequently. Strong problem-solving and troubleshooting skills. Detail-oriented, hardworking, and committed to quality. Good communication and coordination skills. Familiarity with installation standards, quality procedures, and HSE requirements. Supervise installation for BTS, DC power systems and Microwave equipment. Perform equipment configuration and site integration and commissioning . Power system commissioning and testing. Well known with telecom Troubleshooting. Participate in Site Acceptance join visits.

Company Description Platinum Education Services helps adults across the UK access fully funded university degrees. We're looking for a results-driven recruitment professional who thrives on performance and sales. This role is phone-based, target-focused and comes with high earning potential. You’ll be speaking to warm leads, qualifying them, and guiding them through the first steps of applying to university.<br>The ideal candidate will be responsible for developing high-quality applications. They will also be responsible for designing and implementing testable and scalable code.<br>Responsibilities Develop quality software and web applications Analyze and maintain existing software applications Design highly scalable, testable code Discover and fix programming bugs<br>Qualifications Bachelor's degree or equivalent experience in Computer Science or related field Development experience with programming languages SQL database or relational database skills<br>This is an in-person role based in our Cairo office (Sheraton). Candidates must: live in a daily commutable vicinity. be fluent in English with a strong portfolio to showcase your graphic & motion design work. If you do not meet this requirements, please do not apply.

Key Accountabilities: • Ensure compliance with company HSE policies, procedures, and local/international regulations.• Conduct regular site inspections, audits, and hazard assessments to identify unsafe conditions.• Develop and implement risk control measures for machinery, processes, and workplace activities.• Monitor and enforce Permit to Work (PTW) system for hot works, confined space, and other critical activities.• Lead incident investigations, identify root causes, and recommend corrective/preventive actions.• Deliver HSE inductions and trainings for employees, contractors, and visitors.• Support line management in implementing safe systems of work and emergency preparedness.• Participate in fire drills, emergency exercises, and evacuation planning.• Maintain up-to-date records of inspections, incidents, trainings, and certifications.• Promote a strong safety culture across all departments.<br>Qualification & Education• Minimum 3–5 years of experience in Health, Safety, and Environment (HSE) within industrial or manufacturing plants.• Proven background in risk assessment, hazard identification, and control implementation.• Experience in safety audits, inspections, and incident investigation.• Familiarity with ISO 45001, ISO 14001, and other international HSE standards.• Hands-on experience in implementing safety programs and training for employees at different levels.<br>.

Job Responsibilities:Responsible for supervise all site activities at mobile network sites, ensuring that installation, maintenance, swap, and commissioning works are completed safely, efficiently, and in compliance with quality standards and project requirements. Install new power cabinets and battery banks. Perform swap activities for power cabinets and batteries. Install and replace Main Distribution Boards (MDBs). Install and connect DC and AC power cables. Install power meters and related power equipment. Troubleshoot and rectify power faults at sites. Installation and commissioning for MW links LOS & Power site survey<br>Required Qualifications:Bachelor's degree in Communications Engineering Minimum 3 years of experience in the mobile telecommunication field. Willingness to work full-time and travel frequently. Strong problem-solving and troubleshooting skills. Detail-oriented, hardworking, and committed to quality. Good communication and coordination skills. Familiarity with installation standards, quality procedures, and HSE requirements. Supervise installation for BTS, DC power systems and Microwave equipment. Perform equipment configuration and site integration and commissioning . Power system commissioning and testing. Well known with telecom Troubleshooting. Participate in Site Acceptance join visits.

Overseeing and handling warranty claims in a way that guarantee introducing best service level, maintain and improve customer satisfaction level and raise customer loyalty and preserve company’s rights, Maintain spare parts level at preidentified quantities and quality levels.<br>Responsibilities• Monitor warranty budget and expenditures.• Review, investigate and approve warranty claims cases based on pre-identified policies and on timely basis. • Monitor, review and solve customer complains. • Review, investigate and handle cases related to customer protection agency till closed. • Train service, call center, sales, all stakeholder personnel on warranty policies and procedures, existing and new products. • Confer with suppliers by preparing, communicating and follow-up warranty claims and until product/spare parts replaced or value reimbursed. • Confer with logistics team and customs clearance to obtain and satisfy spare parts ordering requirements.• Monitor main warehouse/branches/3rd party spare parts stock and reordering. • Forecasting spare parts volume requirements based on sales/service plans. <br>Qualifications Education: • A minimum of Bachelor of engineering majored in electric/mechanics/electronics, post graduate education is preferred. Experience: • Up to 4 years’ experience in similar position. • Experience in appliances industry.

Job Description :* Prepare and monitor project budgets and cost plans.* Track project costs and compare actual expenses against the approved budget.* Prepare periodic cost reports, forecasts, and cash flow reports.* Analyse cost variances and identify potential budget overruns.* Coordinate with Planning, Procurement, and Site teams to monitor project progress and expenditures.* Review subcontractors' and suppliers' invoices and payment certificates.* Evaluate change orders, variations, and their financial impact on the project.* Support project management with cost analysis and financial recommendations.* Ensure compliance with project budgets, contracts, and company cost control procedures.* Maintain accurate cost records and project documentation.<br>Requirements :* Bachelor's degree in Civil Engineering, Architecture, or a related engineering discipline.* 1–2 years of experience in Cost Control within construction, contracting, or real estate projects.* Strong knowledge of project budgeting, forecasting, and cost reporting.* Familiarity with BOQs, contracts, variation orders, and project cost management.* Proficiency in Microsoft Excel and ERP systems (SAP, Oracle, or similar).* Knowledge of Primavera P6 is an advantage.* Good communication skills in English.* Strong analytical, numerical, and problem-solving skills.* Excellent communication and reporting skills.

About the role:Controls the overall technical vendor scope and issues, ensuring end-to-end completion of all contracted hardware and services. Acts as the key point of contact for vendor relationships — negotiating terms, resolving disputes, and ensuring contractual obligations are met — while supervising technical department contract vendors and supporting top management in managing vendor relations.<br>Roles & Responsibilities:• Implement e& technical standards in all contractual processes with vendors (RFP → LOI → contract → FAC)• Ensure contracted scope is fully delivered per e& standards and contract terms• Follow up with vendors on all actions/projects/commitments per agreed schedule• Consolidate vendor profile data: business volume, performance evaluation, risk & financial status• Support vendors with invoices & payment processing• Support issuance of RFS/PAC/FAC by validating vendor requests against contracts• Manage & control meetings with vendors to resolve disputes and conflicts• Control vendor correspondence and issue monthly dashboard reports<br>Required Qualifications:• Bachelor's degree in Engineering• 1-2 years of experience in contract management, negotiation, or vendor coordination• Strong negotiation and communication skills• Stakeholder management and conflict resolution experience• Comfortable working with Excel for tracking and reporting

Job Responsibilities:Design, develop, test, and maintain business applications on the Out Systems low-code platform, ensuring high performance, scalability, and maintainability. The role supports digital transformation initiatives, improves customer experience, and enhances operational efficiency. Develop and maintain applications using Out Systems low-code platform. Participate in requirement gathering, system design, and architecture discussions. Integrate applications with APIs, databases, and third-party systems. Optimize application performance and ensure security best practices. Troubleshoot, debug, and resolve technical issues efficiently. Provide technical guidance and mentoring for junior developers (for the senior role). Stay updated with the latest Out Systems features and best practices.<br>Required Qualifications:Bachelor’s degree in Computer Science, Software Engineering, Information Systems, or related field. From 3 – 5 years of software development experience, in Out Systems. Strong proficiency in Out Systems platform (Reactive & Traditional Web, Mobile Apps). Good knowledge of integration with REST / SOAP APIs and external systems. Understanding of relational databases (Oracle, SQL Server, or MySQL). Familiarity with agile methodologies and Dev Ops practices. Problem-solving mindset and ability to work under pressure. Excellent teamwork, communication, and documentation skills.

Overseeing and handling warranty claims in a way that guarantee introducing best service level, maintain and improve customer satisfaction level and raise customer loyalty and preserve company’s rights, Maintain spare parts level at preidentified quantities and quality levels.<br>Responsibilities• Monitor warranty budget and expenditures.• Review, investigate and approve warranty claims cases based on pre-identified policies and on timely basis. • Monitor, review and solve customer complains. • Review, investigate and handle cases related to customer protection agency till closed. • Train service, call center, sales, all stakeholder personnel on warranty policies and procedures, existing and new products. • Confer with suppliers by preparing, communicating and follow-up warranty claims and until product/spare parts replaced or value reimbursed. • Confer with logistics team and customs clearance to obtain and satisfy spare parts ordering requirements.• Monitor main warehouse/branches/3rd party spare parts stock and reordering. • Forecasting spare parts volume requirements based on sales/service plans. <br>Qualifications Education: • A minimum of Bachelor of engineering majored in electric/mechanics/electronics, post graduate education is preferred. Experience: • Up to 4 years’ experience in similar position. • Experience in appliances industry.

Role Purpose Responsible for installing, commissioning, troubleshooting, production equipment, ensuring machines are correctly integrated (mechanically, electrically, and via software/control systems) and kept running at optimal uptime.<br>Key Responsibilities Install and commission new production equipment (mechanical, electrical, and controls/software integration) Perform diagnostics, troubleshooting, and repair of electrical and electronic systems (PLC, HMI, sensors, drives, wiring) Configure, update, and troubleshoot equipment software/firmware and control parameters Coordinate with Facilities and suppliers during equipment qualification (IQ/OQ/PQ) where applicable Read and interpret electrical schematics, P&IDs, and technical manuals Maintain accurate documentation of installations, repairs, and calibration records Support root cause analysis for equipment downtime and recommend corrective actions<br>Required Qualifications Bachelor's degree in Electrical, Electronics, Mechatronics, 7 to 10 years' experience in industrial equipment installation, commissioning, or repair Strong hands-on expertise in electrical systems (power, control circuits, PLC/HMI) Working knowledge of equipment software/firmware configuration and troubleshooting Ability to read technical and electrical drawings and manuals Strong problem-solving skills and ability to work independently on-site<br><br>Preferred Experience with automated/robotic manufacturing lines Familiarity with SCADA/MES systems

Role Purpose Responsible for installing, commissioning, troubleshooting, production equipment, ensuring machines are correctly integrated (mechanically, electrically, and via software/control systems) and kept running at optimal uptime.<br>Key Responsibilities Install and commission new production equipment (mechanical, electrical, and controls/software integration) Perform diagnostics, troubleshooting, and repair of electrical and electronic systems (PLC, HMI, sensors, drives, wiring) Configure, update, and troubleshoot equipment software/firmware and control parameters Coordinate with Facilities and suppliers during equipment qualification (IQ/OQ/PQ) where applicable Read and interpret electrical schematics, P&IDs, and technical manuals Maintain accurate documentation of installations, repairs, and calibration records Support root cause analysis for equipment downtime and recommend corrective actions<br>Required Qualifications Bachelor's degree in Electrical, Electronics, Mechatronics, 7 to 10 years' experience in industrial equipment installation, commissioning, or repair Strong hands-on expertise in electrical systems (power, control circuits, PLC/HMI) Working knowledge of equipment software/firmware configuration and troubleshooting Ability to read technical and electrical drawings and manuals Strong problem-solving skills and ability to work independently on-site<br><br>Preferred Experience with automated/robotic manufacturing lines Familiarity with SCADA/MES systems

Key Responsibilities:<br>Process Design & Development: Create and refine engineering processes for water desalination plant, ensuring efficiency and scalability Innovation & Research: Explore new technologies and methodologies to enhance water desalination plant Technical Evaluation: Conduct feasibility studies to identify the most effective desalination technologies approaches for diverse environments Documentation & Calculation: Prepare technical documents including process calculations water balances, flow diagrams, and system descriptions Equipment Selection: Size and specify process equipment according to project requirements Problem-Solving: Address design challenges with creative, practical solutions<br>Qualifications:<br>Bachelor’s degree in chemical or mechanical engineering.5–8 years of relevant engineering experience, ideally with at least 5 years in water desalination sector Experience in process design with a consistent record of efficient and high-quality project delivery. Strong communication skills and ability to work independently or within a multidisciplinary team. Familiarity with international guideline, cods, standards, regulations, and best practices in water desalination process Hands-on experience with small to mega-scale plant design, process calculations, flow diagrams, and water system configuration. Knowledge of demineralization plant and other water and wastewater treatment systems is a plus.

Job Description Achieve target sales volume and Finding out new areas, new customers in order to increase the market coverage. Quotation/tender presentation & follow-up. Make client presentations that promote price value advantage Identify and pursue new business opportunities to expand the customer base and increase market share. Build and maintain strong relationships with key clients, distributors, and partners. Monitor market trends, competitor activities, and customer needs to adjust sales strategies accordingly. Prepare and present regular sales reports, forecasts, and performance analyses to senior management. Negotiate contracts, pricing, and terms with clients to secure profitable deals. Ensure high levels of customer satisfaction through effective account management and after-sales support. Represent the company at industry events, trade shows, and networking opportunities to enhance brand visibility. Job Requirements Bachelor's degree (preferably in Electrical or a related field).4-6 years of experience in sales management, preferably in the retail electrical components sector or related industries. Proven track record of achieving and exceeding sales targets in a competitive environment. Excellent communication, negotiation, and interpersonal abilities. Strong organizational and time management skills.

* Key Accountabilities:1- Act and provide required support for AMI projects on O&M phase.2- Communicate and support the utility sector customer on the assigned project to solve all technical issues faced and support to open channel with other entities.3- Communicate and support the Private sector customers on any required troubleshooting and commissioning.4- Perform required sites visit to provide field technical support.5- Solve all technical issues on level 2 scope on time.6- Escalating any issue related to Level 3 scope to the concerned team and refer to the customer by solution.7- Guarantee best customer satisfaction level.8- Hold a regular field visit to customers’ location to discuss and solve any in progress issues.9- Responsible for day-to-day update and reporting to Field Maintenance Section Head.<br>* Qualification & Education:- Education: Bachelor’s degree in electrical engineering. Cairo Residents.- Fresh Graduates can apply.- Language: English: Excellent. Arabic: Mother Tongue.- Computer skills: Excellent.<br>* Technical competencies:- Excellent knowledge of Electrical Basics, AMI Fundamentals, Low & Medium Voltage Connection, CT/VT, 3PH Sequence.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> Leads project risk management activities for construction projects, including risk identification, assessment, mitigation planning, risk register maintenance, reporting, and coordination with planning, cost control, contracts, and project management teams. Supports leadership in identifying exposure areas and developing practical mitigation actions.</p><p> </p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor’s degree in Engineering, Construction Management, or related field. </li><li>Strong experience in project risk management, construction project controls, risk registers, qualitative and quantitative risk assessment, and reporting. </li><li>Professional certifications such as PMI-RMP, PMP, or equivalent are preferred. </li><li>KSA mega-project experience is an advantage.</li></ul><p> </p></div>

Roles & Responsibilities:<br>Oversee production process and ensure efficiency and quality based on company standards Identify damages and investigate all production problems Monitor production lines for any damages, technical issues, or deviations, and escalate complex problems to Production Lead Conduct basic quality checks to ensure compliance with company standards and report findings Ensure the implementation of production schedules and plans Follow and support implementation of safety, health, and environmental guidelines on the production floor. Assist in organizing plant start-up and shut-down activities under supervision to minimize production loss. Perform quality checks to make sure quality standards are followed Maintain production records, logs, and reports for performance monitoring and review by senior staff.<br>REQUIRED EDUCATION, KNOWLEDGE, AND SKILLS<br>3-4 years of experience in a production or manufacturing role, with leadership responsibilities. Strong knowledge of production processes, safety, and quality standards. Strong knowledge of maintenance planning and scheduling principles. Familiarity with CMMS (Computerized Maintenance Management Systems) and other relevant software. Excellent leadership, communication, and problem-solving skills. Ability to work effectively in a fast-paced, team-oriented environment.

Job Description:Identify and source external leads ( Outdoor ) and project data through market research, networking, and field visits."Welcoming clients and presenting the company and products in a structured professional way face to face. Provide accurate information “product features, pricing, dimensions”. Create innovative client presentations using Auto CAD. Provide technical support in pre- contract phase. Negotiate on price, costs, delivery and specifications with buyers and managers. Identify, qualify, and develop new project sales opportunities. Prepare and deliver project proposals, quotations, and cost estimations. Negotiate contracts, pricing, and delivery terms with clients. Qualifications:Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or related field).3 - 5 years of experience in B2B sales, preferably in the furniture industry or relevant field Excellent communication, negotiation, and presentation skills Ability to prioritize and manage multiple tasks effectively Strong problem-solving skills and ability to work under pressure to meet targets Customer-focused mindset with a passion to understand and meet customer needs Fluency in English and Arabic languages is Must.to Apply send your cv :subject : project sales engineermail : hr@multimgroup.com

Key Responsibilities:<br>Process Design & Development: Create and refine engineering processes for water desalination plant, ensuring efficiency and scalability Innovation & Research: Explore new technologies and methodologies to enhance water desalination plant Technical Evaluation: Conduct feasibility studies to identify the most effective desalination technologies approaches for diverse environments Documentation & Calculation: Prepare technical documents including process calculations water balances, flow diagrams, and system descriptions Equipment Selection: Size and specify process equipment according to project requirements Problem-Solving: Address design challenges with creative, practical solutions<br>Qualifications:<br>Bachelor’s degree in chemical or mechanical engineering.5–8 years of relevant engineering experience, ideally with at least 5 years in water desalination sector Experience in process design with a consistent record of efficient and high-quality project delivery. Strong communication skills and ability to work independently or within a multidisciplinary team. Familiarity with international guideline, cods, standards, regulations, and best practices in water desalination process Hands-on experience with small to mega-scale plant design, process calculations, flow diagrams, and water system configuration. Knowledge of demineralization plant and other water and wastewater treatment systems is a plus.

Job Description Achieve target sales volume and Finding out new areas, new customers in order to increase the market coverage. Quotation/tender presentation & follow-up. Make client presentations that promote price value advantage Identify and pursue new business opportunities to expand the customer base and increase market share. Build and maintain strong relationships with key clients, distributors, and partners. Monitor market trends, competitor activities, and customer needs to adjust sales strategies accordingly. Prepare and present regular sales reports, forecasts, and performance analyses to senior management. Negotiate contracts, pricing, and terms with clients to secure profitable deals. Ensure high levels of customer satisfaction through effective account management and after-sales support. Represent the company at industry events, trade shows, and networking opportunities to enhance brand visibility. Job Requirements Bachelor's degree (preferably in Electrical or a related field).4-6 years of experience in sales management, preferably in the retail electrical components sector or related industries. Proven track record of achieving and exceeding sales targets in a competitive environment. Excellent communication, negotiation, and interpersonal abilities. Strong organizational and time management skills.