وظائف فني نحاس في مصر

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring its good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adherence to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Carry out preventive maintenance for production lines according to the maintenance schedule during the year 4- Review warehouse stocks of spare parts (maximum and minimum levels and lead time) and inform the direct manager if the spare parts used in maintenance work are not of good quality 5- Follow occupational safety, health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange and keep the workplace clean 7- Seek opportunities for improvement and development and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate tracking of corrective and preventive maintenance times and record them in the SAP PM system <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Experience in steam boilers and mineral oil boilers. Job duties: Reading drawings and diagrams and taking or reading measurements to plan procedures for carrying out boiler maintenance. Carrying out scheduled boiler maintenance according to programs prepared by supervisors. Perform preventive maintenance of boilers. Carrying out boiler maintenance tasks assigned to him effectively, selecting the appropriate tools for the job and maintaining them. Prepare lists of suitable spare parts for the work. Commitment to using personal protective equipment at all work sites. Apply occupational health and safety standards in the repair and installation process. Any new tasks within the scope of the job, to be determined by the direct manager according to work requirements and circumstances. Commitment to food safety instructions and good manufacturing practices for the company. Work system: 24-hour shifts. Work location: Sixth of October City - Giza. Experience in steam and mineral oil boilers. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Role:- Responsible for the maintenance and monitoring of production line equipment and ensuring its good technical condition. Responsibilities: 1- Monitor the technical condition of production line equipment and comply with the standardized work steps (SOP). 2- Perform corrective maintenance in case of any mechanical fault in production lines. 3- Carry out preventive maintenance for production lines according to the maintenance schedule throughout the year. 4- Review spare parts stock levels (maximum, minimum, and reorder point) and inform the direct manager if the spare parts used in maintenance works are of poor quality. 5- Follow occupational safety, health and food safety procedures inside the factory and report any violations. 6- Search for various improvement and development opportunities and present ideas to the direct manager. Skills: 1. At least two years of experience, preferably in food factories. 2. A secondary qualification of industrial diploma specializing in (mechanical maintenance) or higher. 3. Ability to work in a team. 4. Communication skills.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Main duties: -1. Operate various CNC machines. 2. Disassemble and assemble components used in the machines. 3. Periodically ream the nut. 4. Ensure tool safety before use. 5. Preventive maintenance of machines. 6. Monitor oil levels and coolant and their suitability. 7. Daily cleaning of machines and keeping spindle brushes free of chips daily. 8. Arrange tools and maintain order. 9. Adjust operating programs when needed and coordinate with the responsible supervisor. 10. Monitor feed rates and operating speeds and adjust if required. 11. Record the production schedule daily. 12. Ensure pieces are machined properly. 13. Follow safety instructions to avoid harm to the operator, machines, or pieces. 14. Ensure the validity and fit of workholding locations with the programs and immediately resolve any conflicts. 15. Monitor wear of the working tool and replace it immediately when needed. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Responsibilities:Production:• Implement the plan with a focus on achieving actual efficiency and net efficiency.• Operate production line machines• Collect his machine data for the final product to calculate the scrap rate during his shift.• Immediately report any machine stoppage to the direct supervisor.Self-maintenance:• Perform self-maintenance activities for the machine assigned to him (cleaning, inspection, lubrication, and tightening) according to preventive maintenance:• Perform the tasks assigned to him from corrective and preventive maintenanceTroubleshooting / Planned maintenance / Overhauls:• Under the supervision of the shift supervisor, work on addressing minor mechanical stoppages on the production line (0 to 30 minutes).• Under the supervision of the shift supervisor and the maintenance manager, work on major mechanical stoppages and planned maintenance, interventions, and overhauls.Other:• Perform activities assigned related to HACCP / TPM / AIB• Adhere to the implementation of safety and occupational health guidelines and requirements (EHS) in all assigned tasks.• Adhere to all food safety requirements during production and maintenance activities.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social security, transport allowance, meals, overtime</li></ul>

<p>Job and Company Overview</p><p>A facility management company is seeking low current technicians for a project in October. Transportation to and from the site is provided.<br>&nbsp;</p><p>Key Responsibilities and Duties</p><ul><li>Maintain low current systems, including fire alarm systems, CCTV systems, access control systems, and audiovisual network systems.</li><li>Read and understand engineering diagrams and technical drawings to ensure work is executed accurately according to specifications and standards.</li><li>Test and commission installed systems to ensure efficiency and safety before handover to the client.</li><li>Identify and resolve technical faults quickly and efficiently, providing detailed reports on issues and proposed solutions.</li><li>Collaborate with engineers and other technicians to ensure the integration of different systems and achieve peak performance.</li><li>Provide technical support and basic training to clients on the use of installed systems.</li><li>Adhere to occupational health and safety standards while performing work at various sites.</li><li>Participate in technical team meetings to review project progress and propose necessary improvements.<br>&nbsp;</li></ul><p>Qualifications and Requirements</p><ul><li>Intermediate qualification.</li><li>At least two years of practical experience in the installation and maintenance of low current systems.</li><li>Good knowledge of fire alarm systems, CCTV, and access control systems.</li><li>Ability to read and understand engineering diagrams and technical drawings.</li><li>Ability to use necessary technical tools and equipment accurately and safely.</li><li>Commitment to occupational safety standards and ability to work in different environments.</li><li>Ability to work within a team and communicate effectively with colleagues and clients.<br>&nbsp;</li></ul><p>Benefits and Perks</p><ul><li>Competitive salary based on experience and qualifications.</li><li>Comprehensive health insurance for the employee.</li><li>Opportunities for training and continuous professional development.</li><li>Performance bonuses based on achievements.</li><li>Supportive work environment and career advancement opportunities.</li><li>Paid annual leave and sick leave.</li><li>Flexible work system according to project requirements.</li></ul>

- Working hours: 8 hours / rotating shifts.&nbsp;<br>- Salary based on experience and interview.&nbsp;<br>- Buses available to transport workers.&nbsp;<br>- Private medical insurance and social security and life insurance.<br>- Annual raises and production incentives.&nbsp;<br>- Seasonal and holiday grants.&nbsp;<br>- Meal allowance and shift allowance in cash.

<p><strong>Job Overview and Company</strong></p><p>Join our team as a Cooling and Air Conditioning Technician where we are committed to delivering high-quality cooling and air conditioning solutions to our customers in the Egyptian market, especially in the Giza or Cairo area.</p><p>We are a leading company in the engineering services and maintenance sector, offering a professional work environment, professional development opportunities, and competitive benefits for committed and permanent employees.</p><p>&nbsp;</p><p><strong>Main Responsibilities and Duties</strong></p><ul><li>Diagnose faults in cooling and air conditioning systems, determine the necessary corrective actions, and perform repairs according to technical standards</li><li>Procure, install, and commission cooling and air conditioning systems according to company specifications and regulatory authorities</li><li>Perform regular preventive maintenance and repair faults in air conditioning units, compressors, condensers, and piping to ensure optimal performance and energy efficiency</li><li>Document all works with precise technical forms and service reports and submit them to supervisors according to approved procedures</li><li>Handle spare parts, estimate maintenance needs, and monitor inventories to ensure required parts are available in a timely manner</li><li>Adhere to occupational health and safety and environmental standards and ensure safety procedures are applied during all fieldwork</li><li>Communicate effectively with customers to ensure their satisfaction and provide the necessary technical advice to maintain equipment</li></ul><p>&nbsp;</p><p><strong>Qualifications and Requirements</strong></p><ul><li>Three-year diploma in Cooling and Air Conditioning or related Mechanical/Electrical Engineering</li><li>Practical experience of 3 to 5 years in cooling and air conditioning, preferably on maintenance and service projects</li><li>Familiarity with low- and medium-pressure cooling systems, understanding of central air conditioning systems and air handling units</li><li>Knowledge of basic electricity and electronics related to cooling and air conditioning systems</li><li>Ability to read schematics, technical drawings, and technical documents</li><li>Ability to work under pressure and flexible hours when needed</li></ul><p>&nbsp;</p><p><strong>Required Skills</strong></p><ul><li>High technical skills in diagnostics and repairs and commitment to quality standards</li><li>Excellent communication with customers, team, and management</li><li>Ability to plan, organize, and manage time effectively</li><li>Principles of occupational safety and adherence to health and safety procedures</li><li>Skill in using measurement tools, inspecting systems, and documenting work</li></ul><p>&nbsp;</p><p><strong>Benefits and Perks</strong></p><ul><li>Competitive salary with performance-based incentives</li><li>Social and health insurance in accordance with approved laws</li><li>Opportunities for professional development and ongoing training within the company</li><li>Professional and supportive work environment with opportunities for promotion within the Engineering department</li></ul>

Tasks: Assembly work for aluminum doors and windows. Conduct installation work on sites (windows – doors – facades). Commitment to quality of execution and working timetables. Conditions: at least 5 years of experience in assembly and installation. Good knowledge of common sections and basics of craftsmanship. Proficiency in using various tools and equipment. Willingness to travel as required by work. Benefits: 8 hours of work + lunch break + overtime. Travel allowance for installations outside Greater Cairo and Giza + meal allowance. Official holidays + regular salaries + advances. Salary is determined by experience. Residence preferred within (Haram – Giza – Marioutiya – Shobra al-Din – Manial) and surrounding areas. In case of expatriates from provinces, housing is provided near the factory on condition of having 5 expatriate technicians. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 15</li><li>Shift system: morning only</li><li>Benefits: health insurance, social insurance, overtime</li></ul>

Operate the Müller Martini machine according to the production plan. Adjust machine settings according to the specifications of each job. Monitor product quality during operation. Perform start-up tests before production. Reduce scrap rate during operation. Perform simple daily cleaning and maintenance tasks. Report technical faults as soon as they occur. Cooperate with printing, binding, and quality control departments. Adhere to occupational safety procedures. Record operating and production data. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 5</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Operating the tablet press machine and preparing the device before operation. Setting production parameters such as: weight – hardness – thickness – appearance. Monitor the pressing process and ensure parameter stability throughout the operation. Perform initial and periodic cleaning of the press according to SOP procedures. Document all operating data in approved forms. Report any faults or deviations to the supervisor immediately. Ensure raw materials quality before use and inform the Quality Department if there are any notes.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning and Evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Tasks: 1. Installation: Installation of tempered glass facades + structural glass + shop facades 2. Interior: Installation of glass doors, office partitions, showers, mirrors, glass shelves 3. Measurement: Take site measurements and prepare glass and accessories 4. Maintenance: Repair and maintenance of old installations 5. Compliance: with quality and safety procedures and handover of the site. We add requirements: - Actual experience in glass and aluminum installations - Able to read drawings and shop drawings - Ability to work at heights and different locations - Integrity, speed, and accuracy in work - Preferable to have a driving license <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning only</li><li>Benefits: Social insurance, transportation allowance</li></ul>

Responsibilities and main tasks Perform preventive and corrective maintenance work for all mechanical equipment and systems within the branch. Conduct regular inspection of entertainment games and mechanical equipment to ensure readiness and safe operation. Diagnose mechanical faults, determine their causes, and take necessary actions to repair them. Perform disassembly, assembly, and replacement of defective parts according to manufacturer instructions. Maintain engines, transmissions, belts, gears, bearings (roller bearings), and other mechanical components. Perform lubrication, cleaning, and periodic calibration of equipment according to maintenance plans. Collaborate with electrical maintenance technicians on joint maintenance work to ensure integrated operation of equipment. Immediate response to emergency faults and work to minimize equipment downtime. Shut down any game or equipment that poses a risk to visitors' safety and report to the supervisor immediately. Ensure the use of the appropriate tools and keep them maintained. Record all maintenance and repair work in approved forms or systems. Prepare reports on recurring faults and propose suitable solutions to prevent recurrence. Monitor spare parts and tools needs and report them before depletion. Maintain cleanliness and order of the maintenance workshop and work sites. Commitment to occupational health and safety procedures and use of personal protective equipment. Adhere to company policies and procedures and operating instructions. Perform any other tasks assigned by the direct supervisor within the job scope. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social security, transportation allowance, overtime</li></ul>

-Requires experience in quantity surveying and preparing progress claims (contractors and owner)

Practical experience: at least two years in Sheet Metal design, specialized in sheet metal work. Knowledge of metalworking CNC machines and the ability to handle production operations. Familiar with the following programs: SolidWorks (Sheet Metal – Solid Part), Autodesk AutoCAD 3D, Nest. Preferred: Cyptus Cut. Job responsibilities: Receive the technical office plan from Planning and Follow-up Department. Receive drawing requests and raise dimensions from the Sales Department. Receive the work order and prepare the execution drawings. Create drawings for new products. Follow up on the execution of new product samples. Respond to production inquiries. Work on developing products in line with modern production trends. Ability to extract shop drawings. Proficient in product design and development skills and finding quick solutions while working. Salary will be determined at the interview based on experience. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance, overtime</li></ul>

Main Responsibilities and Tasks: First: Operations Operate and stop the cooling plant according to approved operating procedures Monitor the operation of compressors, condensers, evaporators, and ammonia pumps Continuously monitor system pressures and temperatures Monitor oil levels and oil separators Monitor ammonia levels inside vessels and tanks Record all daily operation readings Ensure stability of temperatures in cold rooms and production areas Monitor the efficiency of cooling towers and water cycles Second: Maintenance Perform preventive maintenance according to the maintenance plan Carry out corrective maintenance for emergency faults Replace oils, filters, and spare parts as needed Inspect valves, control devices, and measuring instruments Identify causes of faults and take corrective actions Ensure the safety of ammonia pipelines, connections, and welding. Maintain equipment efficiency and extend its operating life Third: Handling of Ammonia Full familiarity with properties of liquid and gaseous ammonia Safe handling of ammonia during operation and maintenance Perform ammonia charging, unloading, and transportation operations according to approved procedures Execute Pump Down operations when needed Detect ammonia leaks and respond immediately Ensure the safety of safety valves and isolation valves Adherence to all instructions for handling industrial ammonia Additional Details • Number of vacancies: 3 • Shift system: morning and evening • Benefits: health insurance, social insurance, transportation allowance, housing, overtime

Alumital installation / manufacturing<br>Responsibilities:<br> - Carry out assembly work for aluminum doors and windows.<br> - Perform installation work on sites (windows – doors – façades).<br> - Ensure quality of execution and work deadlines.<br>Requirements:<br> - Experience of at least 3 years in assembly and installation.<br> - Good knowledge of common sectors and basics of the craft.<br> - Proficiency in using various tools and equipment.<br> - Willingness to travel according to job requirements.<br>Benefits:<br> - 8 hours of work + break + overtime when applicable<br> - Travel allowance for installations outside Greater Cairo and Giza + meal allowance<br> - Official leave + regular salaries + salary advances.<br> - Salary determined according to experience.<br> - Residence preferred in the areas of (Ain Shams / El Marg / El Khosoa / Matariya / Al-Zakah Foundation) and surroundings.

- Preparation of executive drawings (Shop Drawings): converting design drawings into detailed drawings executable on-site.- Quantity surveying: accurately calculating quantities of materials and engineering works required for the project based on the drawings.- Preparation of bill of quantities (Billing): preparing and submitting monthly financial statements to contractors or the owner for the work performed and settling due payments.- Material submittals: preparing and reviewing technical specifications for materials to be supplied and approved by the consultant.- Tenders: participating in the preparation of tender documents, studying and analyzing contractor prices.- Technical coordination and resolution of conflicts: reviewing drawings (architectural, structural, and electrical/mechanical) to detect any interference or engineering conflicts before execution.- Time Schedule: preparing the project schedule, following up on actual execution, and preparing reports on any delays.- Coordination between site and office, transferring technical information, solving execution problems, and ensuring compliance with technical specifications.- Document control: organizing and preserving drawings and documents and maintaining correspondence.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: health insurance, social insurance, transportation allowance</li></ul>

Implement periodic preventive and corrective maintenance programs for equipment and machines. Accurate diagnostics of advanced mechanical faults and repair as quickly as possible. Supervise operation and maintenance of hydraulic, pneumatic, and cooling systems. Execute welding work required for equipment and mechanical structures efficiently. Required technical traits and skills: Experience: Verified practical experience of at least 10 years in mechanical maintenance for factories (preferably paint factories). Hydraulic and Pneumatic: Advanced professional experience in reading, tracing, and maintaining hydraulic and pneumatic circuits. Pumps and chillers: Thorough familiarity and comprehensive maintenance of all types of pumps and chillers (central cooling systems). Welding works: Proficiency in welding of various types and industrial applications. Reading drawings: Ability to read technical catalogs and engineering drawings of equipment. Personal traits: Problem solving: High analytical skills and quick-wittedness in dealing with sudden faults (Troubleshooting). Stress tolerance: Ability to work under pressure and calmly and efficiently handle emergencies and critical faults. Teamwork: Spirit of cooperation and ability to work effectively within the maintenance team and coordinate with other departments. Discipline and safety: Commitment to the highest standards of occupational safety and health (HSE) and accuracy and attention to detail. Commitment: Integrity, responsibility, and full compliance with working hours. <p><strong>Additional details</strong></p><ul><li>Vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social security, meals, overtime</li></ul>