Inspection Engineer Jobs - Red Sea Egypt

???? We’re Hiring: Senior MEP Engineers ????Company: Ace Project Management???? Location: Minya Ace Project Management is looking for experienced Senior MEP Engineers with 7+ years of experience to join our project team in Minya. Positions Available:???? Senior Electrical Engineer???? Senior Mechanical Engineer Requirements:✅ Bachelor’s degree in the relevant Engineering discipline✅ 7+ years of experience in site supervision and MEP construction works✅ Strong knowledge of relevant systems, drawings, specifications, and applicable codes✅ Strong coordination skills with architectural, structural, and other MEP disciplines✅ Good communication, leadership, and reporting skills Responsibilities:???? Supervise MEP works on-site and ensure compliance with approved drawings and specifications???? Review shop drawings and material submittals???? Monitor installation quality, progress, and safety requirements???? Coordinate with contractors, consultants, and other project disciplines???? Follow up on inspections, testing, commissioning, and handover activities???? Identify and resolve technical issues on-site???? Apply now! Send your CV to [Abdulrahman.mostafa@ace-mb.com]Subject: Senior MEP Engineer – Minya#Hiring #MEP #Senior Engineer #Electrical Engineer #Mechanical Engineer #Construction Jobs #Minya #Ace Project Management

O&M Engineer (Wind Turbines) Location: Ra’s Gharib, Ras Gharib Company: Goldwind Work Arrangement: Site-Based (Rotation Schedule) Position Overview The O&M Engineer is responsible for performing operation and maintenance (O&M) activities for wind turbine generators (WTGs) in accordance with project schedules, company standards, and HSE requirements. This role includes preventive and corrective maintenance, troubleshooting, inspections, retrofits, reporting, and customer coordination to ensure the safe and reliable operation of wind farms. Key Responsibilities Operations & Maintenance Perform preventive and corrective maintenance on wind turbine generators (WTGs) in line with company procedures and project schedules. Diagnose and troubleshoot electrical, mechanical, hydraulic, and software-related faults. Replace defective components and complete defect-elimination tasks to restore turbine availability. Conduct scheduled inspections, retrofits, and technical upgrades. Analyze turbine operational data to identify trends and support performance optimization. Execute pre-Commercial Operation Date (pre-COD) activities, including completion checklist reviews and documentation verification. Carry out post-COD inspections and unscheduled maintenance activities. Site Supervision & Coordination Monitor and inspect installation contractors to ensure compliance with technical and quality standards. Coordinate with customers regarding completed services, planned maintenance, and technical issues. Prepare and submit accurate maintenance reports and service documentation. Inventory & Administration Manage spare parts, tools, and consumables inventory. Raise material requisitions and ensure timely availability of critical components. Maintain proper records of maintenance activities, inspections, and technical reports. Health, Safety & Environment (HSE) Strictly comply with company and site HSE policies and procedures. Identify, report, and mitigate workplace hazards. Report incidents and near misses accurately and promptly. Participate in HSE meetings, audits, and safety initiatives. Other Duties Support additional tasks and projects assigned by management. Qualifications & Experience Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related discipline.1–3 years of experience in wind turbine operation and maintenance or in a similar industrial environment. Strong knowledge of electrical, mechanical, hydraulic, and control systems. Ability to read and interpret technical drawings, schematics, and manuals. Experience with SCADA systems and data analysis is preferred. Good command of English (written and spoken) MUST Valid driving license and willingness to travel and work in remote site locations. Ability to work at heights and in demanding weather conditions. Preferred Certifications GWO (Global Wind Organisation) certifications are highly preferred Key Competencies Problem-solving and analytical thinking Strong communication and teamwork Customer-oriented mindset Ability to work independently under pressure Commitment to safety and quality

JOB OPPORTUNITY<br>We are a Main Market LSE listed company which provides a complete range of drilling and mining services. We are an organisation committed to embracing and developing a diverse workforce so that they develop to realise their full potential, and provide you with the ability to make an impact with the next generation of mineral exploration drilling company. With our footprint continuing to expand we are looking for a dedicated and professional Group Mining Engineer.<br> Position: Mining Engineer Location: Marsa Allam Egypt (20 days on site and 10 days off rotation)<br>The Mining Engineer tracks daily site performance, oversees complete drill-and-blast operations, and conducts key technical analyses like haul profiling and ramp planning. The role ensures commercial precision by managing volume reconciliations, SMU metrics, and distance variations to support client invoicing. Ultimately, it serves as the critical operational bridge aligning field crews, internal leadership, and client representatives<br>Job Requirements and Duties<br>Gathering operation data for the day before from all departments (dispatch, mining, survey, drilling, and blasting) and evaluating a report to be sent to Capital (internal) and SGM (Client) side by the early morning A daily breakdown sheet is generated from the dispatch date and sent to the Capital maintenance teamin the early morning to track availability and utilization Daily broken, blasted stock is calculated and to be reported to the Capital operation team, management,and to the SGM (Client). Manage visitor arrangements, meeting rooms and workspace availability Daily haul analysis is done by generating haul profiles for all the loading fleets we have to the dump areas, and it’s sent to the Capital operation team, management, and to SGM (Client) Daily performance review for all operations, including mining and drilling, is generated in one sheet to track our gains and losses for the previous day, and it’s sent to the Capital team and management Weekly SMU sheet, including the material moved by the bench, drilled meters, and machine hours,is to be reported to the commercial manager and the capital operations team Weekly volume reconciliation is to be sent to surveyors by the bench to calculate the actual truck factor The monthly report is done after gathering data from all departments and adding the mining data for the month before submitting it to the management Monthly haul profile is to be sent to the commercial manager, including all haul distances for the month, including the variance to claim invoice upon it Monthly SMU sheet to be sent to the commercial manager, including the material moved by the bench, drilled meters, and machine hours Monthly volume reconciliation is done upon the actual surveyed volume and amending the production figures according to it Send a record of authorized daywork carried out on the previous day, including any use of the principal’s mining equipment, to be submitted to the client and finance team if required Blast designs are to be done on a regular basis and are to be sent to the client for approval in case of (Trim shots – Edge shots – Presplits) Communicating approved blast designs with the survey team, mining team, drilling team, and blastingcrew to let all parties get their tasks done in order to achieve the design and get it drilled and blasted. Daily pit inspection is done to check the drill patterns needed to be blasted and that it has no issues Discuss any issues regarding drill and blast with the blast crew, D&B superintendent, mining team, and GM to find a better solution to increase our productivity Review and approve the blasting tie-ups and explosives quantities before blasting Set a weekly clean-up plan for all drilling areas and constructed drill temp ramps to be done and attached to the weekly plan meeting Weekly blast review to be done for the previous week, highlighting the blast quality, any major issues, and how we can eliminate them Communicate with the client in case we need to add more rigs to the weekly fleet or use them to drill in the client area Weekly blasting strings are to be sent to the Blast crew, survey team, and to the client with the agreed blasting sequence to plan accordingly for tie-ups or pattern clean-ups and mark-ups Attend the daily and weekly meetings Regular check for the quality during charging the shots Attend Blast master review meetings for each bench and discuss with the Blast crew department before submitting to the client Carry out any tasks requested by the direct manager.<br>Education Required<br>Bachelor of Engineering<br>Experience and skills Required<br>Minimum 2 to 5 years of experience in same field Proficient in Microsoft Office (Word, Excel, Power Point, Outlook) comfortable learning new systems and tools Calm, adaptable and solutions-focused, with good judgement under pressure and tight timelines A proactive, can-do attitude and strong attention to detail<br>Please note that this job work conditions require 20 days on site and 10 days off rotation<br>Check out www.capdrill.comIf you think you have what it takes, please apply directly to job advertisement or send your resume to HR. Sukari@capdrill.com<br>Capital Limited is an equal opportunity employer, and we encourage everyone to apply. The Company reserves the right:1. To contact only the best qualified candidates to participate in the selection exercise.2. Not to make any appointment following this advertisement.

At Multisolutions Construction, we provide innovative construction solutions. We are committed to delivering high-quality projects through teamwork, technical excellence, and continuous improvement.<br>Role Description The Mechanical Fit-Out Engineer is responsible for supervising site execution, preparing technical shop drawings, and conducting quantity surveying for mechanical systems (MEP) within high-end interior fit-out projects. Qualifications:Supervise mechanical site execution (HVAC, Firefighting, Plumbing, and Drainage). Prepare and review mechanical shop drawings and coordinate with architectural designs. Perform mechanical quantity surveying (QS / Quantity Take-off) for invoices and material procurement. Monitor subcontractor progress, quality, and safety on-site. Resolve technical site issues and handle consultant comments. Requirements:Bachelor's Degree in Mechanical Engineering.3–5 years of experience in Fit-Out projects. Strong experience in Mechanical Shop Drawings. Solid knowledge of HVAC, Firefighting, and Plumbing systems. Very good command of Auto CAD.

Company Description:Solar Installer EPC is an Egyptian shareholding company focused on becoming a leading solar energy provider in the Egyptian market, with a specialization in photovoltaic (PV) systems. The company has established an advanced international network of suppliers, EPCs, developers, and consultants to deliver high-quality solar solutions. Solar Installer EPC serves clients across Egypt and the broader MENA region, offering professional services that support sustainable energy projects. The headquarters is based in Cairo, Egypt, with project locations in key cities including Hurghada. Role Description:The Planning and Cost Control Engineer role is a full-time, on-site position based in Hurghada. This role is responsible for developing and maintaining project schedules, monitoring progress, and ensuring alignment with project milestones and contractual requirements. The engineer will prepare and track project budgets, analyze cost variances, and implement corrective actions to keep projects within approved financial limits. Daily tasks include coordinating with project managers and site teams, updating reports and dashboards, forecasting resource needs, and supporting procurement planning. The role also involves reviewing technical and commercial documentation, contributing to risk assessments, and ensuring adherence to company standards and client expectations. Qualifications:Strong skills in project planning and scheduling using relevant software tools (e.g., MS Project, Primavera), with the ability to develop and update detailed timelines. Proficiency in cost control, budgeting, and financial analysis, including tracking expenditures, preparing cost reports, and performing variance and forecast analysis. Experience in data analysis and reporting, with the ability to compile clear dashboards, progress reports, and performance indicators for stakeholders. Knowledge of solar energy or construction/EPC projects, including basic understanding of PV systems, site installation processes, and engineering documentation. Strong coordination and communication skills, with the ability to collaborate effectively with cross-functional teams and manage multiple tasks on-site. Bachelor’s degree in Engineering (preferably Electrical, Mechanical, Civil) or a related technical field. Good command of English and Arabic, both written and spoken, and strong MS Office skills (Excel, Word, Power Point)and Primavera P6Previous experience in planning, cost control, or project controls within construction, energy, or infrastructure projects is highly beneficial. Attention to detail, problem-solving mindset, and willingness to work on-site in Hurghada and occasionally travel to other project locations if required.

Job Summary:Senior Site Technical Office Engineer will be responsible for leading all technical office functions, including design and document review, shop drawings, and material submittals, to ensure full project compliance. The role coordinates across disciplines, manages quantity surveying, variations, and invoicing, provides technical support to site teams, and ensures timely and high-quality project delivery.<br>Job Description 1. Study and analyze project contract documents (time schedule, design drawings, BOQ, specifications, etc.) to ensure project compliance.2. Complete, review, check, and approve all shop drawings prepared by the team before submission to the consultant.3. Prepare/update site progress reports in close coordination with the site team and highlight risks or delays.4. Review structure & MEP drawings and complete technical coordination required between different disciplines.5. Complete QS required and update relevant BOQ6. Ensure the site team is provided with the latest approved drawings, specifications, and technical instructions.7. Prepare and review material submittals to meet project requirements and coordinate with procurement.8. Prepare, review, and issue periodic client and sub-contractors running invoices as per contractual terms.9. Lead the preparation of variation orders, claims, and cost impacts, and follow up with the consultant till approval.10. Complete, review and approve as-built drawings and ensure timely submission to the project consultant.11. Coordinate with consultants, clients, and subcontractors to resolve technical issues and support smooth project execution.12. Provide technical support during project planning, risk assessment, and scheduling stages<br>Job Requirements• Bachelor’s degree in Civil or Architectural Engineering.• 5–7 years of experience in construction project management or technical office functions.• Proven experience in landscape and swimming pool projects is a strong advantage.• Excellent negotiation, communication, and leadership skills.

Job Description Create detailed 2D and 3D designs for woodworking products and workshop manufacturing requirements. Prepare technical drawings and production-ready designs for CNC machining. Generate CNC programs and optimize cutting paths for efficiency and material utilization. Operate and monitor CNC machines to ensure accurate production according to specifications. Read and interpret engineering drawings and design files. Conduct quality checks on finished products and make necessary adjustments. Collaborate with production and workshop teams to improve manufacturing processes. Troubleshoot operational issues related to CNC machinery and production. Perform basic machine setup and calibration. Support preventive maintenance activities when required.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning shift only</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

<ul><li><p>Oversee and coordinate all on-site architectural activities to ensure compliance with design specifications and project requirements.</p></li><li><p>Collaborate with project managers, engineers, and contractors to deliver projects on schedule and within budget.</p></li><li><p>Review architectural drawings, blueprints, and specifications to ensure accuracy and feasibility.</p></li><li><p>Conduct regular site inspections to monitor progress, quality, and adherence to safety standards.</p></li><li><p>Resolve technical and design issues that arise during construction, providing innovative solutions as needed.</p></li><li><p>Prepare and maintain detailed site reports, documentation, and progress updates for stakeholders.</p></li><li><p>Ensure all construction activities comply with local building codes, regulations, and company standards.</p></li><li><p>Liaise with clients, consultants, and regulatory authorities to facilitate smooth project execution.</p></li><li><p>Coordinate the procurement and delivery of materials, ensuring timely availability for site operations.</p></li><li><p>Support the implementation of sustainable and environmentally responsible construction practices.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Architecture.</p></li><li><p>4 to 10 years of proven experience in Architectural Site Engineering or a similar role.</p></li><li><p>Strong knowledge of Construction Processes, Materials, and Architectural Detailing.</p></li><li><p>Excellent understanding of Building Codes, Safety Regulations, and Industry Standards.</p></li><li><p>Demonstrated ability to manage multiple tasks and prioritize effectively in a fast-paced environment.</p></li><li><p>Exceptional communication and interpersonal skills for effective collaboration.</p></li><li><p>Strong problem-solving abilities and attention to detail.</p></li><li><p>Experience working in an office-based environment with regular site visits.</p></li><li><p>Ability to work full-time and commit to long-term projects.</p></li></ul><p></p>

<ul><li><p>Manage the translation of the projects program into applicable design over the complete project cycle from conception stage to construction.</p></li><li><p>Review technical drawings, plans, and specifications.</p></li><li><p>Surveying and reviewing the BOQ for all mechanical items</p></li><li><p>Preparing budget for all the mechanical items.</p></li><li><p>Monitoring the quality standards for execution of designs at sites.</p></li><li><p>Giving technical supports during and after handover of the projects.</p></li><li><p>Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>BSc Degree in Mechanical Engineering.</p></li><li><p>Proven working experience in Mechanical Engineering Design (Construction).</p></li><li><p>Familiarity with 2D or 3D Engineering Design.</p></li><li><p>Previous Experience in a Construction is a must.</p></li><li><p>Strong Communication and Negotiation skills.</p></li><li><p>Ability to communicate technical knowledge in a clear and understandable manner.</p></li><li><p>Technical writing skills.</p></li></ul><p></p>

About Sabbour Consulting Since 1957, Sabbour Consulting has been a leading multidisciplinary engineering consulting firm delivering expert services in project management, design, cost control, and construction supervision across Egypt and the region. We pride ourselves on precision, innovation, and delivering projects that exceed client expectations.<br>Job Summary Leading and managing all quantity surveying, cost control, and commercial activitieson site. The role ensures strict cost control, accurate measurement, contractual compliance, and effective coordination with site teams, consultants, and subcontractors to deliver projects within approved budgets, timelines, and quality standards.<br>Key Responsibilities:Lead and prepare detailed quantity take-offs and BOQs for architectural/civil works based on approved drawings and specifications. Develop and monitor project budgets, cost plans, and cash flow forecasts. Track cost performance, analyze variances, and provide regular cost reports to management. Review, certify, and recommend subcontractor interim payments and final accounts. Review drawings, specifications, and scope of work to ensure accuracy and commercial completeness. Coordinate with site engineers, planning, and construction teams to align progress with cost control. Identify and resolve quantity discrepancies, scope gaps, and design changes in coordination with consultants. Administer contracts in accordance with contractual conditions (FIDIC or equivalent, if applicable). Lead the preparation, evaluation, and negotiation of variation orders, claims, and change requests related to architectural works. Maintain accurate records for variations, claims, site instructions, and commercial correspondence. Support dispute avoidance and resolution from a commercial perspective. Lead quantity and cost input for procurement of architectural materials and subcontract packages. Prepare commercial evaluations, comparisons, and recommendations for subcontractor and supplier selection. Participate in subcontract negotiations and contract finalization. Coordinate with procurement and planning teams to ensure timely material delivery aligned with project schedules. Prepare and submit detailed monthly cost reports, progress statements, and financial forecasts. Maintain comprehensive commercial records including measurements, invoices, approvals, and payment certificates. Support preparation of final project accounts and handover documentation. Coordinate with consultants, contractors, and internal stakeholders on quantity and cost-related matters. Attend site and commercial meetings, providing professional commercial input. Ensure compliance with company policies, project procedures, and contractual obligations.<br>Qualifications & Requirements:Bachelor’s Degree in Civil or Architecture Engineering. Professional certification (RICS, PMP, or equivalent) is an advantage. Minimum 5-7 years of experience in Quantity Surveying, with strong exposure to architectural/civil site works. Proven experience in senior or lead QS roles on medium to large-scale projects. Advanced knowledge of architectural/civil construction methods and finishing works. Strong expertise in cost planning, value engineering, and commercial management. Solid understanding of construction contracts and claims management. High proficiency in MS Excel and QS software (e.g., Cost X, Plan Swift, or similar). Strong negotiation, leadership, and stakeholder management skills. Ability to manage multiple priorities and work under pressure.

Job Purpose:<br>To prepare budgets, track the actual costs to identify project expenses over and under runs, trends,areas of inefficiency and opportunities for project cost improvement. Ensure the timely issuance of Cost Control Reports.<br>Roles & Responsibilities:<br>· Interact with the team to ensure the input needed to perform the job and provide support andassistance in performing their tasks.· Study project file and prepare the required analysis and breakdowns.· Generate projects’ monthly cost control reports according to company’s standard Form andassociated back-up.· Provide ad-hoc cost reports when required.· Analyze project expenses by trade and compare it to budget.· Analyze material purchase orders compared to budget as part of the review process for themonthly reports.· Monitor the status and actual cost for labors, equipment, and sub-contractors.· Disseminate budget information to all operating groups, providing clarification and additionalinformation where required.· Provide on-going technical support to Construction Team.· Review project invoice status on a monthly basis.· Prepare and support the provision and analysis of any costs related to variations and claims.· Attend periodic meetings with the Project Management Team to discuss the issues related to costreport (minimum on a monthly basis).· Fulfill all the requirements of Cost Control International Dep. regarding the department database.· Prepare the following :. Project Cost Plan and review it on monthly basis.. Project Cash flow review it on monthly basis.. Project close-out report.· Follow up on the Productivity Team and issue the monthly reports.· Provide mentorship and guidance to Junior and Cost Controllers within the team.· Handle related special assignments if required.· Ensure that employee is working according to the company’s HSE policies and regulations, andfully aware of his job risk assessment and environmental aspects.<br>Minimum Qualification & Requirements:<br>Education/ Qualifications: BSC Engineering Professional Certification: PMP, PRMG or CCE certificate is preferred Work Experience: 5 - 7 years’ experience in a related field Language: Good command of English language Computer Skills: Microsoft Office, Auto CAD, Oracle Knowledge

<p>Implementing quality and food safety standards in depots</p> <p>Audit on storage practices and personnel hygiene in depots</p> <p>Good Warehouse Practices (GWP)</p> <p>Audit on sales trucks: ambient twice/week and cold trucks</p> <p>Weekly trade audit on markets</p> <p>Implementing training plan for logistics and sales teams</p> <p>Follow-up and verifying closure of nonconformities resulting from regular audits and daily operations</p> <p>Daily check on receiving shipments from plant</p> <p>Daily check and follow-up on pest control system</p> <p>Daily control and monitoring of returns and their classification</p> <p>Daily inspection of receiving lots for physical status and product release</p> <p>Daily follow-up on preparing orders, loading, and shipping shipments</p> <p>Follow-up on orders for premium customers based on special requirements</p> <p>Follow-up on customer complaint closure on time and customer visits</p> <p>Follow-up on implementing cleaning and sanitation program in depot and personnel hygiene</p> <p>Record all required data of daily operational processes according to ISO 9001:2015 documentation</p> <p>Daily follow-up for cold stores and daily registration of data logger records</p> <p>Take immediate corrective action in case of cold store temperature violation</p> <p>Raising regular reports to the direct manager on a regular basis according to procedure</p> <p>Implementing an efficient traceability system</p> <p><strong>Details</strong></p> <ul> <li>Number of vacancies: 1</li> <li>Shift system: Morning only</li> <li>Benefits: Health insurance, social security, transportation allowance, meals, accommodation, overtime</li> </ul>

<p><strong>Job Summary</strong></p><p>The QC Engineer is responsible for ensuring that all raw materials, concrete production processes, and finished concrete products comply with company specifications, project requirements, and applicable standards. The role involves conducting laboratory and field testing, monitoring production quality, maintaining quality records, and supporting continuous improvement initiatives to ensure consistent concrete quality.</p><p></p><p><strong>Key Responsibilities</strong></p><p></p><p><strong>Quality Control &amp; Assurance</strong></p><ul><li><p>Monitor and control the quality of concrete produced at the batching plant.</p></li><li><p>Ensure compliance with project specifications, customer requirements, and relevant standards (ASTM, BS, EN, ACI, or local standards).</p></li><li><p>Establish and implement quality control procedures and testing programs.</p></li><li><p>Review and approve concrete mix designs and trial mixes.</p></li></ul><p></p><p><strong>Raw Material Inspection &amp; Testing</strong></p><ul><li><p>Conduct quality inspections and testing of cement, aggregates, admixtures, water, and other materials.</p></li><li><p>Verify suppliers' certificates and ensure compliance with approved specifications.</p></li><li><p>Monitor storage conditions of raw materials to prevent quality deterioration.</p></li></ul><p></p><p><strong>Concrete Testing</strong></p><ul><li><p>Perform fresh concrete tests including:</p></li><li><p>Slump Test</p></li><li><p>Air Content Test</p></li><li><p>Temperature Test</p></li><li><p>Density Test</p></li><li><p>Supervise casting, curing, and testing of concrete specimens.</p></li><li><p>Evaluate compressive strength test results and identify trends.</p></li></ul><p></p><p><strong>Plant Quality Monitoring</strong></p><ul><li><p>Monitor batching operations to ensure accurate proportioning and mixing.</p></li><li><p>Verify calibration of batching equipment, weighing systems, and testing instruments.</p></li><li><p>Investigate quality issues and recommend corrective and preventive actions.</p></li></ul><p></p><p><strong>Documentation &amp; Reporting</strong></p><ul><li><p>Maintain laboratory and quality control records.</p></li><li><p>Prepare daily, weekly, and monthly quality reports.</p></li><li><p>Record test results and issue quality compliance reports.</p></li><li><p>Ensure traceability of production batches and test data.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's Degree in Civil Engineering, Materials Engineering, or related field.</p></li><li><p>Certification in Quality Control or Concrete Technology is preferred.</p></li><li><p>Membership in professional engineering organizations is an advantage.</p></li><li><p>3-7 years of experience in concrete batching plants, ready-mix concrete, construction materials testing, or quality control.</p></li><li><p>Experience in laboratory and field concrete testing.</p></li><li><p>Familiarity with ASTM, ACI, BS, or equivalent concrete standards.</p></li></ul><p></p>

A leading <strong>alcoholic beverage company</strong> is looking for a qualified and experienced <strong>HSE Engineer</strong> to join its growing team and contribute to maintaining the highest standards of health, safety, and environmental compliance.<br><br>Key Responsibilities:<br><br><strong>Health &amp; Safety Management<br><br></strong><ul><li>Implement and maintain the company's HSE policies, procedures, and programs</li><li>Ensure compliance with applicable local HSE legislation, regulations, and client requirements</li><li>Conduct regular workplace and site inspections to identify unsafe conditions and practices</li><li>Perform Job Safety Analysis (JSA) and Risk Assessments for activities and operations</li><li>Develop and review Method Statements, Risk Assessments, and Safe Work Procedures</li><li>Monitor compliance with Permit-to-Work (PTW) systems, where applicable</li><li>Ensure appropriate PPE is identified, available, and properly used</li><li>Monitor high-risk activities such as working at height, lifting operations, hot work, confined spaces, excavation, electrical work, and work involving hazardous substances</li><li>Participate in emergency preparedness activities and drills</li><li>Provide guidance to employees and management on HSE matters<br><br></li></ul><strong>Environmental Management<br><br></strong><ul><li>Monitor compliance with environmental requirements and company procedures</li><li>Support waste management, chemical handling, spill prevention, and pollution-control initiatives</li><li>Conduct environmental inspections and identify potential environmental risks</li><li>Support environmental reporting and maintain relevant records</li><li>Promote initiatives to reduce waste, energy consumption, and environmental impact<br><br></li></ul><strong>Incident &amp; Accident Management<br><br></strong><ul><li>Investigate accidents, incidents, near misses, and unsafe conditions</li><li>Identify root causes and recommend corrective and preventive actions</li><li>Prepare incident investigation reports and maintain HSE records</li><li>Monitor corrective actions until closure</li><li>Analyze incident trends and recommend preventive measures<br><br></li></ul><strong>HSE Inspections &amp; Audits<br><br></strong><ul><li>Conduct routine HSE inspections, audits, and compliance checks</li><li>Prepare inspection and audit reports and track corrective actions</li><li>Support internal and external HSE audits</li><li>Monitor contractor and subcontractor compliance with HSE requirements</li><li>Maintain HSE documentation, registers, checklists, and records<br><br></li></ul><strong>Training &amp; Awareness<br><br></strong><ul><li>Deliver HSE inductions and toolbox talks to employees, contractors, and visitors</li><li>Develop and conduct safety awareness sessions based on identified risks</li><li>Identify HSE training requirements and coordinate relevant training programs</li><li>Promote employee participation in safety initiatives and reporting of unsafe conditions<br><br></li></ul><strong>Emergency Preparedness<br><br></strong><ul><li>Develop and maintain emergency response procedures and plans</li><li>Participate in emergency drills and evaluate their effectiveness</li><li>Ensure emergency equipment, fire-fighting equipment, first-aid facilities, and evacuation arrangements are appropriately maintained</li><li>Support emergency response teams and coordinate actions during incidents<br><br></li></ul><strong>Reporting &amp; Documentation<br><br></strong><ul><li>Prepare daily, weekly, and monthly HSE reports</li><li>Maintain HSE statistics, including incidents, near misses, inspections, observations, and corrective actions</li><li>Monitor HSE KPIs and provide recommendations for improvement</li><li>Maintain accurate HSE records and documentation</li><li>Prepare presentations and reports for management and project stakeholders<br><br></li></ul><strong>Requirements<br><br></strong><ul><li>Bachelor's degree in Occupational Health &amp; Safety, Environmental Engineering, Engineering, or a related discipline</li><li>3-7 years of relevant HSE experience, preferably in construction, engineering, manufacturing, industrial, or project environments</li><li>Strong knowledge of HSE principles, risk assessment, incident investigation, and safety management systems</li><li>Experience conducting site inspections, safety audits, and risk assessments</li><li>Good knowledge of applicable HSE legislation and regulatory requirements</li><li>Experience working with contractors and subcontractors</li><li>Strong communication and interpersonal skills</li><li>Ability to work independently and identify potential risks before they result in incidents</li><li>Good report-writing, documentation, and analytical skills</li><li>Proficiency in Microsoft Office, particularly Excel, Word, and PowerPoint</li></ul>

<strong>Company Description</strong> JAZ Hotel Group is the hospitality arm of Travco Group International, Egypt’s largest travel conglomerate, and offers distinctive stays across a variety of destinations. The group focuses on thoughtfully designed experiences that emphasize warmth, comfort, and authentic service. Through brands such as JAZ Elite, JAZ, and JAZ Neo, JAZ Hotel Group caters to a wide range of guest preferences, from serene retreats to vibrant, contemporary escapes. Each property is crafted to provide personal, memorable experiences that reflect the unique character of its location. Team members join a culture committed to exceptional service and continuous improvement in guest satisfaction.<br><strong>Role Description</strong> The Assistant Chief Engineer is a full-time, on-site position based in Hurghada, supporting the overall operation and maintenance of the hotel’s engineering and maintenance functions. This role assists in planning, coordinating, and supervising preventive and corrective maintenance for mechanical, electrical, plumbing, HVAC, and building systems to ensure safety, efficiency, and minimal downtime. The Assistant Chief Engineer collaborates with the Chief Engineer to monitor energy usage, implement cost-effective solutions, and maintain compliance with local regulations and company standards. Daily responsibilities include supervising engineering team members, assigning tasks, conducting inspections, responding to guest and operational maintenance requests, and maintaining accurate records of maintenance activities and inventories. The role also participates in project implementation, equipment upgrades, and continuous improvement initiatives to support optimal guest comfort and smooth hotel operations.<br><strong>Qualifications<br></strong> <br><ul><li>Strong technical knowledge in hotel engineering systems, including mechanical, electrical, plumbing, HVAC, and building maintenance.</li><li>Experience in supervising maintenance teams, coordinating schedules, and overseeing contractors or service providers.</li><li>Ability to apply preventive and corrective maintenance practices, troubleshoot issues, and implement practical solutions.</li><li>Awareness of safety, health, and environmental standards, with commitment to regulatory compliance and safe work practices.</li><li>Effective communication and interpersonal skills for collaborating with cross-functional hotel teams and interacting with guests when needed.</li><li>Proficiency in using maintenance management tools or software and maintaining clear documentation and reports.</li><li>BSc in engineering (mechanical or electrical); hospitality or facility management experience is an advantage.</li><li>Previous experience in a similar engineering leadership role within hotels or large facilities is strongly preferred.</li><li>Ability to work flexible hours, respond to emergencies, and support operations during peak periods.</li><li>Commitment to continuous improvement, energy efficiency, and high standards of guest comfort and service.</li></ul>

A leading company in the alcoholic beverage industry is seeking a <strong>Production Engineer</strong> to join their team.<br><br>The Production Engineer is responsible for optimizing manufacturing processes, ensuring efficient production operations, maintaining product quality, and improving productivity while minimizing production costs and waste. The role involves monitoring production activities, troubleshooting technical issues, implementing process improvements, and working closely with Production, Quality, Maintenance, and Engineering teams.<br><br><strong>Requirements<br><br></strong><ul><li>Plan, monitor, and improve daily production activities to achieve production targets</li><li>Ensure production processes are carried out safely, efficiently, and according to approved procedures</li><li>Monitor production performance, machine utilization, output, downtime, scrap, and productivity</li><li>Identify production problems and implement effective corrective and preventive actions</li><li>Analyze manufacturing processes and recommend improvements to increase efficiency and reduce costs</li><li>Prepare and maintain production reports, work instructions, process documentation, and performance records</li><li>Coordinate with Maintenance to minimize machine breakdowns and production downtime</li><li>Work closely with the Quality Department to ensure products meet required specifications and quality standards</li><li>Investigate production defects and implement root-cause analysis and corrective actions</li><li>Support continuous improvement initiatives such as Lean Manufacturing, 5S, Kaizen, and waste reduction</li><li>Optimize manpower, materials, machines, and production methods</li><li>Assist in production planning and ensure availability of required materials, tools, and equipment</li><li>Support the introduction of new products, processes, machines, and production technologies</li><li>Develop and monitor KPIs related to production efficiency, quality, downtime, and productivity</li><li>Ensure compliance with company policies, safety requirements, and applicable manufacturing standards</li><li>Train and provide technical guidance to production operators and technicians when required</li><li>Participate in improvement projects and cross-functional teams</li></ul>

<p><strong>Company Description</strong> Coltri Compressor Egypt is a specialist provider of high-performance air compression solutions, serving clients in industrial, marine, and recreational sectors. The company focuses on delivering reliable equipment, technical expertise, and after-sales support tailored to customer requirements. Operations emphasize safety, quality, and adherence to international standards. Team members collaborate closely with clients and partners to design efficient, cost-effective solutions that support long-term operational performance.</p><p><strong>Role Description</strong> The Tendering Engineer is a full-time, on-site role based in Hurghada. This role is responsible for preparing competitive technical and commercial offers, including detailed quotations and cost breakdowns for air compressor projects and related services. Typical tasks include reviewing tender documents, analyzing technical specifications, coordinating with procurement to obtain supplier offers, and ensuring compliance with customer and regulatory requirements. The Tendering Engineer will collaborate with sales, engineering, and operations teams to clarify scopes, optimize solutions, and meet submission deadlines. The role also involves maintaining tender documentation, updating pricing databases, and supporting negotiations by providing accurate technical and financial information.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Candidates should possess strong skills in preparing quotations and commercial offers, with attention to detail and cost accuracy.</li><li>Candidates should possess solid analytical skills for evaluating technical specifications, project requirements, and cost structures.</li><li>Candidates should possess effective communication skills for coordinating with internal teams, suppliers, and clients.</li><li>Candidates should possess procurement-related skills, including sourcing suppliers, comparing bids, and supporting purchasing decisions.</li><li>Candidates should possess knowledge in electrical engineering or a closely related engineering discipline, preferably with exposure to compressors or industrial equipment.</li><li>Relevant qualifications such as a bachelor’s degree in engineering (electrical or mechanical preferred) or equivalent technical education.</li><li>Proficiency in MS Office (especially Excel and Word) and familiarity with ERP or tender management tools is beneficial.</li><li>Ability to work on-site in Hurghada, manage multiple tenders simultaneously, and meet strict deadlines.</li><li>Experience in tendering, sales engineering, or project estimation in industrial or marine sectors is an advantage.</li><li>Strong organizational skills, problem-solving mindset, and commitment to ethical, non-discriminatory professional conduct.</li></ul>

<p><strong>About the Role</strong></p><p><strong>We are seeking a motivated and detail-oriented Junior Civil Engineer</strong> with around 3-7 years of professional experience in the construction industry. The ideal candidate will have hands-on experience in civil works, coupled with good knowledge of <strong>hotel and resort projects</strong>. This role offers an excellent opportunity to grow within a dynamic team and contribute to high-profile developments.</p><p></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Assist in planning, coordinating, and executing civil engineering works on site.</p></li><li><p>Support senior engineers and project managers in ensuring projects are delivered on time, within budget, and to the required standards.</p></li><li><p>Review and interpret construction drawings, specifications, and technical documents.</p></li><li><p>Monitor site activities to ensure compliance with safety regulations, quality standards, and company policies.</p></li><li><p>Coordinate with subcontractors, suppliers, and other stakeholders to resolve technical or site-related issues.</p></li><li><p>Prepare progress reports, daily logs, and other documentation as required.</p></li><li><p>Participate in inspections and quality control checks for civil and structural works.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p></p></li></ul><p></p>

<ol><li><p><strong>Job Summary:</strong></p></li></ol><p>The Site Technical OAice Engineer manages and coordinates all on-site technical activities. This role bridges the gap between engineering designs, construction teams, and consultants. The primary goal is to ensure project execution complies with approved shop drawings, contract specifications, and budgetary controls.</p><p></p><ol start="2"><li><p><strong>Key Responsibilities</strong>:</p></li></ol><ul><li><p>Shop Drawings: Prepare, review, and coordinate detailed architectural and structural shop drawings while resolving any MEP conflicts.</p></li><li><p> Quantity Surveying (QS): Ability to review and prepare quantity surveying tables submitted by the contractor, and compare contractual quantities against actual, asbuilt quantities executed on site.</p></li><li><p>Financial Invoices: Audit contractors’ invoices after consultant review, and review contractors monthly progress payment requests.  </p></li><li><p>Document Control: Manage and track Request for Information (RFIs), Material Submittals, and approvals, ensuring the accurate update of Design &amp; As-Built drawings. </p></li><li><p> Variations &amp; Claims: Study design changes, calculate variation orders, and prepare technical reports.  </p></li><li><p>Site Support &amp; Coordination: Provide immediate engineering solutions to the site execution team and coordinate directly with the consultant to resolve field issues.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Key Qualifications &amp; Skills</strong>  </p><ul><li><p>Education: Bachelor’s degree in civil or architectural engineering.  </p></li><li><p>Experience: 5 to 7 years of solid technical oAice experience with a strong track record in the hospitality and hotel construction sector. </p></li><li><p> Technical Proficiency: Mastery of AutoCAD and Microsoft OAice.</p></li></ul><p></p>

<p>We are looking for a highly skilled and motivated <strong>Architectural Technical Office Engineer</strong> to join our team in Hurghada.</p><p>The successful candidate will be responsible for preparing and reviewing architectural shop drawings, coordinating with different disciplines, and ensuring that technical documents are accurate and comply with project requirements.</p><h3>Key Responsibilities</h3><ul><li><p>Prepare and review architectural shop drawings and detailed drawings.</p></li><li><p>Review project specifications, drawings, and contract documents.</p></li><li><p>Coordinate architectural drawings with structural and MEP disciplines.</p></li><li><p>Prepare quantity take-offs and assist with material specifications when required.</p></li><li><p>Review subcontractors’ and suppliers’ technical submissions.</p></li><li><p>Prepare and review RFIs and technical documentation.</p></li><li><p>Ensure drawings and technical documents comply with project specifications and applicable standards.</p></li><li><p>Coordinate with the site team to resolve technical issues and provide necessary clarifications.</p></li><li><p>Follow up on drawing approvals and revisions.</p></li><li><p>Maintain proper documentation and records of technical office activities.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s Degree in Architecture.</p></li><li><p>4–7 years of relevant experience in Architectural Technical Office / Construction.</p></li><li><p>Strong experience in preparing and reviewing architectural shop drawings.</p></li><li><p>Good knowledge of finishing and construction details.</p></li><li><p>Proficiency in AutoCAD is required.</p></li><li><p>Knowledge of Revit is an advantage.</p></li><li><p>Good understanding of architectural drawings, specifications, and construction methods.</p></li><li><p>Strong coordination and communication skills.</p></li><li><p>Ability to work under pressure and meet project deadlines.</p></li><li><p>Previous experience working on construction / residential / hotels projects is preferred.</p></li><li><p>Willingness to work in Hurghada is essential.</p></li></ul><p></p>