Mechanical Design Engineer Jobs in Egypt

The Senior Mechanical Maintenance Engineer will act as the main technical owner for all mechanical maintenance activities across the university, supported by the existing supervisors, technicians and service providers.<br>The scope of this position will include, but will not be limited to:HVAC systems, including chillers, VRV, VRF and split units. Elevators and vertical transportation systems. Pumps and pumping stations. Water supply and drainage systems. Ventilation, fresh air and exhaust systems. Mechanical firefighting systems, in coordination with the concerned departments. Other mechanical assets and utility systems across the university. The recommended candidate profile is as follows:Bachelor’s degree in Mechanical or Electromechanical Engineering. Minimum of 7–10 years of relevant experience in mechanical maintenance and facilities management. Strong practical experience in HVAC systems, especially chillers, VRV, VRF and split units. Previous experience in elevator maintenance follow-up, contractor coordination, recurring-failure investigation, safety requirements and load-testing procedures. Strong experience in preventive and corrective maintenance. Ability to review technical reports, quotations, spare parts and contractor recommendations. Experience in CAFM/CMMS systems, work-order management and maintenance reporting. Previous experience in large facilities such as universities, hospitals, hotels, malls, airports or similar complex operations is preferred.

Job Purpose Ensure that all manufactured products meet defined quality standards, customer requirements, and regulatory specifications by executing and supervising inspections across the production cycle. The QC Engineer develops inspection plans, verifies compliance with technical specifications, oversees product testing, and coordinates closely with cross-functional teams to resolve quality issues. This role safeguards product reliability, reduces non-conformities, and ensures on-time delivery of defect-free products while maintaining strict adherence to QHSE standards and company policies.<br>Key Responsibilities Develop, implement, and execute inspection plans in alignment with quality procedures and project requirements. Perform and supervise inspections at different stages of production to ensure conformity with product specifications and quality standards. Review product design specifications to determine inspection criteria, sampling methods, and acceptance standards. Verify calibration of inspection tools and ensure equipment readiness for accurate inspections. Monitor and follow up on the order cycle with Production and Planning departments to ensure timely inspections and delivery commitments. Support production teams in troubleshooting quality issues and recommend corrective/preventive actions. Ensure products are properly identified, segregated, and held in quality-controlled areas until approved for dispatch. Coordinate with the Testing Laboratory by submitting technical documentation (drawings, datasheets, shipment details) and following up on test results. Review and validate test outcomes, ensuring certificates of conformity are obtained in line with customer and regulatory requirements. Align with the Technical and Packaging departments to confirm packing requirements and documentation for local and export shipments. Issue shipping requests only for approved products and coordinate with the Shipping Department for final dispatch. Prepare and maintain accurate inspection records, test results, and compliance reports. Coordinate with QA to finalize NCRs and address activities associated with quality issues. Submit regular quality status updates and inspection summaries to Project Management and Quality Section Head. Ensure adherence to ISO 9001, ISO 14001, ISO 45001, and ISO 17025 quality standards, as well as customer and regulatory requirements.<br>Qualification & Education Education: Bachelor’s degree in Mechanical, Electrical, Industrial, or Quality Engineering. Years of Experience: 1-3 years of experience in Quality Control/Quality Assurance within a manufacturing or heavy industry (preferably transformers or electrical equipment).

We’re looking for a skilled Senior Mechanical Maintenance Engineer to join our engineering team. If you have hands-on experience in maintaining industrial equipment and a passion for improving operational efficiency, we’d love to hear from you. Key Responsibilities:Execute and supervise daily mechanical maintenance activities Perform root cause analysis and propose preventive solutions Monitor equipment performance using predictive maintenance tools Prepare detailed failure analysis reports and recommend performance improvements. Track and analyze equipment performance indicators (MTTR, MTBF). Oversee repairs of pumps, compressors, gear systems, and hydraulic components Test equipment post-maintenance to ensure proper functionality. Ensure compliance with safety and quality standards

Job Title: Mechanical Site Engineer Department: Construction / Engineering Location: Suez Employment Type: Project - based Working Hours: 10Working days: 6Accommodation, internal transportation provided<br>Role Summary We are seeking a highly skilled and driven Mechanical Engineer to lead mechanical installation and site operations for our upcoming industrial construction projects. In this role, you will be the driving force behind our mechanical site teams, ensuring that complex installations are executed safely, on schedule, and to the highest quality standards. Drawing on your robust industrial background, you will take ownership of site coordination, manpower deployment, material control, and direct client communication, ensuring all project milestones are met efficiently.<br>Key Responsibilities<br>Site & Installation Management Lead and oversee all mechanical installation activities on-site, specifically tailored to heavy industrial environments. Ensure the seamless coordination of mechanical works with other disciplines (civil, structural, and electrical) to prevent clashes and sequence delays. Develop and implement effective material control systems to ensure equipment and supplies are procured, delivered, and stored securely without disrupting the project critical path. Manage manpower allocation, balancing crew sizes and skill sets against daily productivity targets to optimize labor costs and efficiency.<br>Productivity, Quality & Safety Drive site productivity by establishing clear workflows, identifying bottlenecks early, and implementing corrective measures to keep the project on schedule. Enforce strict adherence to Quality Assurance/Quality Control (QA/QC) standards, ensuring all mechanical installations comply with project specifications, codes, and industry best practices. Champion a zero-harm safety culture. Enforce all HSE (Health, Safety, and Environment) policies, lead safety briefings, and ensure all site personnel operate in a safe environment.<br>Stakeholder & Client Communication Act as the primary technical point of contact for the client on-site, building trust through transparency and technical competence. Lead progress meetings, providing accurate, data-driven updates on mechanical milestones, productivity rates, and material status. Manage and resolve technical queries, RFIs (Requests for Information), and submittals promptly to keep the project moving.<br>Qualifications & Requirements Education: Bachelor’s Degree in Mechanical Engineering. Experience: 7years of proven, relevant construction experience, with a strong mandatory background in the industrial sector (e.g., manufacturing plants, power generation, oil & gas, or heavy infrastructure).<br>Core Competencies:Deep expertise in large-scale mechanical installations, piping, and equipment erection. Strong track record of site coordination, material logistics, and manpower control. Demonstrated ability to balance productivity pushes with uncompromising quality and safety standards. Communication Skills: Exceptional verbal and written communication skills, with the proven ability to manage client relationships and present technical information clearly. Technical Skills: Proficiency in industry-standard software (e.g., Auto CAD, MS Project, Primavera P6, and standard MS Office suite).

JOB DETAILSJob Title: Mechanical Community Management Senior Engineer Department: Community Management (Mechanical) Reports to: Community Management Team Leader Scope: MEPVacancies: 4Location: On Site (10th of Ramadan / Suez – El Ain El Sokhna / 6th of October)<br>Responsibilities Execute preventive, corrective, and predictive maintenance for mechanical facility systems. Maintain and oversee water supply networks, sewage and drainage systems, pumping stations, and sewage lift stations. Conduct regular inspections of pumps, valves, pipelines, firefighting systems, HVAC mechanical components, and drainage networks, identifying risks and implementing corrective actions. Support the development and implementation of maintenance schedules to ensure timely task execution. Coordinate maintenance activities related to wastewater systems and stormwater networks to ensure uninterrupted operation. Collaborate with external contractors and vendors to ensure timely and high-quality delivery of specialized mechanical services. Assist in monitoring maintenance costs and propose cost-effective solutions without compromising quality or safety. Ensure all mechanical maintenance activities comply with health, safety, and environmental regulations, especially in wastewater and confined space operations. Respond to mechanical emergencies such as pump failures, pipe leakages, blockages, or flooding incidents to minimize downtime. Prepare technical reports, inspection records, and maintenance documentation.<br>Qualifications Education: Bachelor’s in Mechanical or Electromechanical Engineering Experience: 3–6 years of experience in facility or industrial maintenance (MEP-focused) with hands-on exposure to water networks, drainage systems, pumping systems, and sewage lift stations Certifications: HSE certifications are an advantage Skills: Strong technical knowledge of HVAC, plumbing, pumps, troubleshooting, vendor coordination, safety compliance, documentation, and reporting Languages: Excellent English proficiency

Role Objectives:<br>The Maintenance Engineer supports the maintenance function by ensuring the reliable and safe operation of factory machinery and equipment. The role focuses on executing maintenance activities, supporting troubleshooting, and building strong technical capabilities across electrical and mechanical systems under the guidance of senior team members.<br>Roles & Responsibilities:Execute preventive maintenance plans as scheduled. Perform routine inspections on:Mechanical components (motors, bearings, conveyors) Electrical systems (panels, wiring, sensors) Report early signs of wear, faults, or inefficiencies. Ensure proper housekeeping and equipment care standards. Assist in diagnosing and fixing faults in:Electrical systems (basic PLC issues, sensors, wiring) Mechanical systems (simple breakdowns, replacements, adjustments) Hydraulic & pneumatic systems Respond to breakdowns in a timely manner under supervision. Escalate complex issues to senior engineers when needed. Support installation and commissioning of new equipment. Assist in minor modifications to improve machine performance. Participate in continuous improvement initiatives. Follow all safety procedures and guidelines during maintenance work. Apply safe practices in high-risk activities (e.g., lockout/tagout). Report hazards and unsafe conditions immediately. Record maintenance activities, repairs, and downtime accurately. Update checklists and logs for completed tasks. Support data collection for analysis and reporting. Assist in tracking usage of spare parts. Report shortages or critical spare part requirements. Ensure proper handling and storage of components. Work closely with senior engineers and technicians on daily tasks. Actively learn troubleshooting techniques and system operations. Participate in on-the-job training and technical development. Required Education, Knowledge, And Skills:Basic to intermediate knowledge of:1) Electrical systems (panels, sensors, basic PLC exposure)2) Mechanical systems (motors, conveyors, rotating equipment)3) Hydraulic & pneumatic systems (basic understanding) Ability to read basic electrical diagrams and mechanical drawings Bachelor’s degree or diploma in Mechanical Engineering, Electrical Engineering, or Mechatronics Safety Awareness: Understanding of basic industrial safety practices 1–3 years of experience in maintenance within FMCG, manufacturing, or production environments.

Company Description Tiptop HR Consulting and Training is a professional services firm focused on connecting organizations with specialized talent and providing targeted training solutions. The company supports clients across multiple industries, helping them build effective teams and enhance operational performance. Through tailored consulting and development programs, Tiptop HR aims to improve workforce capabilities and project outcomes. The organization values collaboration, continuous learning, and practical problem-solving. Joining Tiptop HR Consulting and Training offers opportunities to contribute to impactful projects while developing professional expertise.<br>Role Description The Project Material Engineer role is a full-time remote position responsible for supporting materials-related activities across assigned projects. Day-to-day tasks include evaluating and selecting appropriate materials for components and systems, conducting materials analysis, and collaborating with project teams to ensure compliance with technical specifications and standards. The role involves performing research and development activities, reviewing material performance data, and recommending improvements to designs or processes. The Project Material Engineer will prepare technical documentation, support supplier evaluations, and contribute to risk assessments related to material choices. This position requires regular coordination with engineering, quality, and procurement stakeholders to ensure project timelines and quality requirements are met.<br>Qualifications<br> <br>Strong foundation in materials-focused disciplines, including Materials, Materials Science, and Metallurgy. Ability to perform technical Research and Development (R&D) activities related to material performance and innovation. Experience with Material Selection for engineering applications, considering cost, performance, safety, and regulatory requirements. Bachelor’s degree or higher in Materials Science, Metallurgical Engineering, Mechanical Engineering, or a related field. Familiarity with industry standards and testing methods for materials characterization and qualification. Proficiency in technical documentation, data analysis, and use of engineering tools or software related to materials evaluation. Strong problem-solving skills, attention to detail, and ability to work independently in a remote environment. Effective communication skills for collaborating with multidisciplinary teams and presenting technical findings. Experience in project-based work or engineering consulting environments is an advantage.

Perfect Holding is looking for a skilled Mechanical BIM Engineer to join our team and contribute to the successful delivery of a large-scale infrastructure project.<br>Requirements:<br>▪️ Bachelor's degree in Mechanical Engineering.▪️ 3–5 years of experience in infrastructure projects within construction or contracting companies.▪️ Strong experience in BIM modeling for infrastructure MEP systems, including:<br>* Water Supply* Drainage & Sewerage* Stormwater Drainage* Firefighting Systems* Pumping & Utility Networks<br>▪️ Proficiency in Autodesk Revit MEP, Civil 3D.▪️ Experience in BIM coordination, clash detection, shop drawings, and multidisciplinary coordination.▪️ Familiarity with Autodesk Construction Cloud (ACC) is an advantage.▪️ Good understanding of BIM standards, model segregation, and information management.▪️ Experience in swimming pools, water features, lagoons, or utility infrastructure projects is highly preferred.▪️ Strong communication, coordination, and problem-solving skills.<br>???? Location: 6th of October City, Giza

‏⁦⁩We are seeking a highly organized and technical Mechanical Facility Engineer to oversee our maintenance planning, facility operations, and spare parts management. In this role, you will be the core bridge between our production and engineering teams, ensuring maximum equipment uptime, smooth refrigeration/HVAC operations, and strict adherence to preventive maintenance schedules.<br>⁦⁩المسؤوليات⁦⁩<br>⁦Maintenance Planning: Plan and schedule preventive maintenance for the maintenance workshop and the refrigeration and air conditioning department. Execution & Follow-up: Follow up on all preventive maintenance work within the refrigeration, air conditioning, and main maintenance departments. Work Order Management: Track, manage, and follow up on all maintenance work orders passing between the production and engineering departments. Interdepartmental Coordination: Coordinate closely between production and engineering teams to ensure fast and efficient completion of all maintenance work orders. System Monitoring: Monitor and track all ongoing and completed maintenance work through the company's computerized maintenance management program. Inventory Control: Manage the inventory for all engineering and mechanical spare parts to avoid stockouts or overstocking. Procurement Management: Handle and manage purchase orders specifically for engineering spare parts. Supplier Relations: Contact and negotiate with suppliers to source and obtain the highest quality spare parts for facility maintenance. Technical QA/Receiving: Receive spare parts from the purchasing department and verify their full technical conformity to engineering standards. External Workshop Supervision: Inspect and receive all mechanical parts that have been repaired or modified in external workshops. Team Development: Manage and coordinate the training schedule for all engineering technicians to maintain high team competency.<br>⁩<br>⁦⁩المؤهلات⁦⁩<br>⁦ Bachelor’s degree in Mechanical Engineering. Experience: [Insert number, e.g., 3-5] years of experience as a Facility Engineer, Maintenance Planner, or in a similar industrial/facility maintenance role. Technical Knowledge: Strong background in HVAC, refrigeration systems, and mechanical workshop operations. Software Skills: Proven experience working with Maintenance Management Programs (CMMS) . Skills: Excellent communication, strong negotiation skills with suppliers, and high attention to technical details.⁩

We're Hiring | Business Development Engineer – MEP???? Location: Cairo, Egypt ???? Experience: 3–6 Years ????️ Industry: MEP | Engineering | Construction<br><br>We are looking for a motivated and results-driven Business Development Engineer to join our team and support our business growth within the MEP (Mechanical, Electrical & Plumbing) sector.<br>About the Company Watania Advanced Systems is an Egyptian company specializing in Fire Fighting, Fire Alarm, and Fire Suppression Solutions within the MEP and construction sectors. The company provides reliable engineering solutions and works with consultants, contractors, developers, and clients across various commercial, industrial, and infrastructure projects.<br><br>???? Job Responsibilities-Identify, develop, and convert new business opportunities within the MEP and construction market.-Develop and maintain strong relationships with clients, consultants, contractors, developers, and key decision-makers.-Generate and qualify new leads and sales opportunities.-Build and manage a healthy sales pipeline from lead generation to project award.-Conduct market research and identify upcoming MEP projects, tenders, and business opportunities.-Understand client requirements and coordinate with technical teams to provide suitable MEP solutions.-Prepare and deliver technical presentations, proposals, quotations, and commercial offers.-Follow up on submitted proposals and negotiate with clients to support successful project acquisition.-Monitor market trends, competitors, and customer requirements.-Maintain accurate records of leads, opportunities, client interactions, and sales activities.-Achieve agreed business development, sales, and revenue targets.<br><br>???? Requirements-Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.-3–6 years of experience in Business Development, Sales, Technical Sales, or Business Development Engineering.-Good knowledge and understanding of the MEP industry and building services.-Previous experience in MEP contracting, construction, engineering services, HVAC, or building services is highly preferred.-Experience dealing with consultants, contractors, developers, facility owners, and end clients.-Strong understanding of the sales cycle, lead generation, opportunity management, negotiation, and client relationship management.-Strong communication, presentation, negotiation, and interpersonal skills.-Commercially driven with strong business development and sales skills.-Good command of English.<br><br>???? Interested candidates are invited to apply with their updated CV or send CV to careers@reavera.com or via Whats App to 01070118009.<br><br>⭐ Preferred Qualifications Candidates with experience in any of the following areas are highly preferred:MEP Contracting | HVAC | Mechanical Systems | Electrical Systems | Plumbing | Building Services | Construction | Engineering Services | Technical Sales | B2B Sales | Project Sales | Tendering | Pre-Sales | Client Relationship Management<br><br>???? Keywords Business Development Engineer | Business Development | MEP | MEP Engineer | Sales Engineer | Technical Sales Engineer | MEP Sales | Engineering Sales | B2B Sales | Technical Sales | HVAC | Mechanical Engineering | Electrical Engineering | Plumbing | Building Services | MEP Contracting | Construction | Engineering Services | Lead Generation | Sales Pipeline | Client Acquisition | Key Account Management | Tendering | Proposal Management | Project Sales | Client Relationship Management<br>#Hiring #Business Development Engineer #Business Development #MEP #MEPEngineer #Sales Engineer #Technical Sales #MEPSales #Engineering Jobs #HVAC #MEPContracting #Construction Jobs #B2BSales #Cairo Jobs #Egypt Jobs #Hiring Now

Company Description Innovate Solutions is a leading electromechanical firm providing comprehensive Mechanical, Electrical, and Plumbing (MEP) excellence. Our expertise spans the entire project lifecycle—from sophisticated Power Distribution and Renewable Energy to advanced HVAC and Fire Protection systems. Role Description· Review project specifications and BOQs to identify required Mechanical materials and equipment.· Source and evaluate suppliers, subcontractors, and service providers in compliance with company standards.·Request and analyze quotations to ensure technical and commercial compliance with project requirements.· Negotiate pricing, terms, and delivery schedules with vendors to achieve cost-effective procurement.· Prepare and issue purchase orders and follow up with suppliers to ensure timely delivery of materials.· Coordinate with engineering, project management, and site teams to align material procurement with project timelines.· Evaluate and recommend alternative suppliers/materials where cost savings or better delivery schedules can be achieved.· Maintain and update the approved vendor list and supplier performance database.· Ensure compliance with company procurement policies, contractual obligations, and quality standards.· Track and manage material submittals, approvals, and delivery schedules in coordination with site teams.· Monitor market trends, new products, and supplier innovations relevant to Mechanical contracting.· Assist in resolving any supply issues, shortages, or disputes with vendors.· Prepare regular procurement status reports for management review. Qualifications· Bachelor’s Degree in Mechanical Engineering· Minimum 2–5 years of experience as a Mechanical Procurement Engineer in contracting· Site experience is plus.· Strong knowledge of Mechanical materials, equipment, and suppliers in the regional market.· Solid understanding of procurement procedures, contractual terms, and supply chain management.· Excellent negotiation, communication, and analytical skills.· Proficiency in MS Office (Excel, Word, Power Point) · Ability to work under pressure and meet tight deadlines.· Strong organizational and multitasking skills

Company Description Innovate Solutions is a leading electromechanical firm providing comprehensive Mechanical, Electrical, and Plumbing (MEP) excellence. Our expertise spans the entire project lifecycle—from sophisticated Power Distribution and Renewable Energy to advanced HVAC and Fire Protection systems. Role Description· Review project specifications and BOQs to identify required Mechanical materials and equipment.· Source and evaluate suppliers, subcontractors, and service providers in compliance with company standards.·Request and analyze quotations to ensure technical and commercial compliance with project requirements.· Negotiate pricing, terms, and delivery schedules with vendors to achieve cost-effective procurement.· Prepare and issue purchase orders and follow up with suppliers to ensure timely delivery of materials.· Coordinate with engineering, project management, and site teams to align material procurement with project timelines.· Evaluate and recommend alternative suppliers/materials where cost savings or better delivery schedules can be achieved.· Maintain and update the approved vendor list and supplier performance database.· Ensure compliance with company procurement policies, contractual obligations, and quality standards.· Track and manage material submittals, approvals, and delivery schedules in coordination with site teams.· Monitor market trends, new products, and supplier innovations relevant to Mechanical contracting.· Assist in resolving any supply issues, shortages, or disputes with vendors.· Prepare regular procurement status reports for management review. Qualifications· Bachelor’s Degree in Mechanical Engineering· Minimum 2–5 years of experience as a Mechanical Procurement Engineer in contracting· Site experience is plus.· Strong knowledge of Mechanical materials, equipment, and suppliers in the regional market.· Solid understanding of procurement procedures, contractual terms, and supply chain management.· Excellent negotiation, communication, and analytical skills.· Proficiency in MS Office (Excel, Word, Power Point) · Ability to work under pressure and meet tight deadlines.· Strong organizational and multitasking skills

Key Responsibilities Prepare BOQs (Bills of Quantities) for HVAC and plumbing systems. Perform quantity takeoffs from mechanical drawings. Analyze project specifications and ensure accurate quantity measurement. Support cost estimation and tendering processes. Monitor material quantities and cost variations (pre-construction level). Use Excel for quantity tracking and reporting. Requirements Bachelor's degree in Mechanical Engineering. Government University Graduates Only5–7 years of experience in Quantity Surveying (MEP / Mechanical). Knowledge of HVAC and plumbing systems. Strong understanding of BOQs and quantity takeoffs. Ability to read and interpret mechanical drawings. Strong Excel skills.

Job Description We are seeking a motivated and detail-oriented Site Engineer (Mechanical) to join our Infrastructure team. The successful candidate will be responsible for supervising on-site activities, ensuring work is executed according to project specifications, quality standards, and safety requirements while coordinating with subcontractors, consultants, and project stakeholders. Key Responsibilities:Supervise and monitor daily site activities. Ensure work is executed according to approved drawings, specifications, and project schedules. Coordinate with subcontractors, consultants, and other project disciplines. Monitor quality standards and ensure compliance with HSE requirements. Prepare daily progress reports and support project documentation. Resolve site issues and provide technical support during project execution. Assist in material inspections and ensure proper resource utilization. Qualifications:Bachelor's degree in Mechanical Engineering or Electrical Engineering.2–4 years of experience in infrastructure construction projects. Strong knowledge of infrastructure site execution. Good communication, coordination, and problem-solving skills. Proficiency in Microsoft Office and Auto CAD (knowledge of additional engineering software is a plus).

Job Purpose The Mechanical Maintenance Engineer is responsible for ensuring the reliability, availability, and efficient operation of all mechanical equipment and machinery within the plant. The role involves preventive and corrective maintenance, troubleshooting, equipment inspections, and supporting continuous improvement initiatives to minimize downtime and maintain safe and efficient operations.<br>Key Responsibilities Plan and execute preventive, predictive, and corrective mechanical maintenance activities. Troubleshoot mechanical failures and breakdowns and ensure timely resolution. Conduct regular inspections of machinery and mechanical equipment to identify potential issues. Ensure maximum equipment availability and minimize unplanned downtime. Maintain and repair mechanical systems including pumps, compressors, gearboxes, conveyors, valves, bearings, hydraulic and pneumatic systems. Analyze recurring breakdowns and recommend corrective and preventive actions. Coordinate with Production and other departments to ensure maintenance activities are completed with minimum impact on production. Prepare maintenance reports and maintain accurate records of breakdowns, repairs, spare parts, and preventive maintenance activities. Follow up on maintenance work orders and ensure timely completion. Support the Maintenance Manager in developing and improving preventive maintenance plans. Monitor the condition and performance of critical equipment and recommend improvements when required. Coordinate with external contractors and suppliers for specialized maintenance activities. Ensure availability and proper use of mechanical spare parts and maintenance tools. Participate in equipment installation, commissioning, modification, and improvement projects. Ensure all maintenance activities comply with company safety, quality, and environmental standards. Follow all plant HSE procedures and ensure safe working practices during maintenance activities. Contribute to continuous improvement initiatives aimed at improving equipment reliability, productivity, and maintenance costs.<br>Qualifications Bachelor’s degree in Mechanical Engineering.2–5 years of experience in mechanical maintenance, preferably within a manufacturing or industrial environment. Strong knowledge of mechanical maintenance principles and troubleshooting techniques. Good knowledge of pumps, compressors, gearboxes, conveyors, bearings, valves, hydraulic and pneumatic systems. Experience with preventive and corrective maintenance systems. Good understanding of maintenance planning and spare parts management. Familiarity with CMMS or maintenance management systems is an advantage. Good knowledge of MS Office. Good communication and problem-solving skills. Ability to work effectively under pressure and respond to equipment breakdowns. Willingness to work in a plant environment in Beni Suef and according to the required shift schedule.

About us:Elsewedy Electric: Powering Progress, Empowering People.<br>For over 80 years, Elsewedy Electric has been a leading manufacturer of electrical products and solutions, operating in 19 countries with over 18,000 employees. We offer a diverse range of products across wire & cable, electrical equipment, engineering & construction, digital solutions, and infrastructure investments. Beyond our manufacturing prowess, we're passionate about creating a positive and empowering work environment for our team. We foster a culture of diversity, inclusion, and continuous learning, providing opportunities for professional development and career growth. Our commitment to employee well-being extends beyond compensation with initiatives promoting work-life balance and overall well-being. Join us and be part of a company that's not just powering progress, but empowering people to build a brighter future.<br>This job opportunity is offered by ELSEWEDY ELECTRIC Graduate Development Program The program is designed for Graduates with 0-2 years' of experience. The program offers various job rotations, mentorships, coaching & trainings.<br>Job Purpose:The Sales Engineer supports the sales team by providing technical assistance and product knowledge to drive the successful sale of company products. Reporting to the Sales Manager, this role involves assisting in technical presentations, preparing documentation, and addressing customer inquiries. The Sales Engineer plays a key role in ensuring that product solutions align with customer needs and contribute to achieving sales targets.<br>Job Responsibilities:Meets Sales targets for the assigned market(s) through our partners and in accordance with the overall policies and objectives. Builds sales pipeline via customer visits, site visits, training, and sales presentations. Stay informed about industry trends and competitive products to provide relevant insights and recommendations. Help prepare and deliver technical presentations and product demonstrations to prospective and existing customers. Maintain a solid understanding of the company’s product portfolio, including technical specifications, features, and applications. Assist in the preparation of technical documentation, including product specifications, solution designs, and proposal materials. Support site visits and technical assessments to showcase product capabilities and gather customer feedback. Monitor and follow up on each project delivery time. Follow up and support the payment collection process. Provide regular updates to the Product Sales Section Head on technical support activities, customer interactions, and feedback. Document and report any issues or challenges encountered during the sales process to ensure timely resolution. Provide administrative and technical support to the sales team, including organizing meetings, tracking sales activities, and managing technical resources. Assist the sales team by providing technical information and support during the sales process. Participate in training sessions and team meetings to develop technical and sales skills.<br>Job Qualifications:Education: Bachelor's degree of Mechanical Engineering or related field. Years of Experience: 0–2 years of experience Language proficiency: Good command of English

We’re Hiring: Senior Tender Engineersالتخصصات المطلوبة فقط (Architectural– Mechanical)<br>Location: 6th of October, Giza العمل من مقر الشركة وليس ريموتلي<br>We are looking for experienced Senior Tender Engineers to join our team across Civil, Electrical, and Mechanical disciplines.<br> Requirements:• Bachelor’s degree in Architectural, or Mechanical Engineering• 5-10 years of experience in tendering, cost estimation, or related roles• Strong experience in residential, commercial & large-scale projects• Proficiency in Auto CAD / Revit / engineering software• Strong analytical, negotiation & communication skills<br>Key Responsibilities:• Analyze tender documents (drawings, specs, BOQs)• Prepare cost estimates & technical/commercial proposals• Coordinate with procurement & evaluate subcontractors• Ensure compliance with RFQs and project requirements• Collaborate with technical teams to optimize solutions<br> What We Offer:• Competitive salary• Professional work environment• Career growth opportunities

Company Description Geyushi Automotive Industry has been a key player in Egypt’s automotive sector, building a strong legacy of innovation and manufacturing excellence. The company operates a state-of-the-art facility in the 10th of Ramadan city, producing around 1,500 buses annually, including eco-friendly models that support a more sustainable future. A robust research and development unit drives locally inspired designs that align with and surpass global standards. With over 60% of products sourced locally, Geyushi emphasizes integration, local expertise, and national industrial growth. The organization offers opportunities to contribute to redefining the automotive landscape within Egypt and beyond. Role Description The Foreign Procurement Engineer is a full-time, on-site role based in 10th of Ramadan city. This position is responsible for managing international sourcing activities, including identifying and evaluating foreign suppliers, requesting and analyzing quotations, and negotiating terms to secure cost-effective and high-quality materials and components. The role involves preparing and tracking purchase orders, coordinating with internal engineering, production, and finance teams to ensure timely delivery and compliance with technical specifications and quality standards. The Foreign Procurement Engineer will monitor market trends, assess supplier performance, and maintain accurate procurement records to support continuous improvement in the supply chain. Daily tasks also include resolving procurement issues, maintaining clear communication with stakeholders, and contributing to process optimization initiatives. Qualifications Ability to conduct Supplier Evaluation and assess vendor performance using strong Analytical Skills. Experience managing Purchase Orders, including creation, follow-up, and documentation. Proficiency in handling Request for Quotation (RFQ) processes, from issuing RFQs to comparing and selecting offers. Strong Communication skills for effective collaboration with suppliers and cross-functional internal teams. Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Supply Chain Management, or a related technical field. Experience in foreign procurement or international sourcing within the automotive or manufacturing sector is highly beneficial. Knowledge of import regulations, international trade terms (Incoterms), and logistics fundamentals. Proficiency in MS Office and ERP or procurement management systems, with attention to detail and organizational skills. Ability to work on-site in Nasr City, manage multiple priorities, and meet deadlines in a fast-paced environment.

About Immensa Immensa is transforming how the world's largest energy companies address critical spare part challenges. Our solutions help asset-intensive organisations decrease over-stocking, reduce downtime, manage obsolescence, and strengthen supply chain resilience through advanced digital inventory and distributed manufacturing technologies. We partner with some of the world's largest Oil & Gas and industrial companies, supporting mission-critical operations where reliability, quality, and trust are essential.<br>Role Overview We are seeking a Manufacturing Engineer – Subject Matter Expert (Static Equipment), reporting to the Head of Project Management. This is an individual contributor role with matrix accountability for assigned project teams and supplier deliverables. To act as the technical subject-matter expert for static equipment — valves, pressure vessels, heat exchangers, columns, tanks, skids and associated piping — across assigned manufacturing projects, interpreting 3D models and 2D engineering drawings to define, plan and drive execution. To own the manufacturing project lifecycle for static equipment component scopes, from kick-off through supplier delivery and final inspection, ensuring On-Time-In-Full (OTIF) delivery against customer requirements. To be the primary technical and commercial interface between Immensa and its static equipment and fabrication supply base, translating design intent into a manufacturable, code-compliant and quality-assured production route.<br>Main Responsibilities Read, interpret and validate 3D CAD models and 2D engineering drawings — including GD&T, datums, tolerances, weld symbols and joint details, corrosion allowance, material and NDT callouts — for pressure-retaining and fabricated static equipment. Select and justify the optimum manufacturing route (plate cutting and rolling, forming and pressing, shell and head fabrication, nozzle and flange preparation, tube-to-tubesheet welding and expansion, cladding and weld overlay, machining of sealing faces, post-weld heat treatment) and material of construction for the service conditions. Address fabrication specifics — weld procedure and welder qualification (WPS/PQR/WPQ), welding sequence and distortion control, fit-up and alignment tolerances, out-of-roundness, PWHT cycles and pressure-test requirements. Develop and manage project schedules, milestones and deliverables for assigned static equipment orders, tracking live status against OTIF targets. Drive supplier execution — issue technical data packages, review fabrication and welding process plans, weld maps and manufacturing record books, and close out technical queries. Lead design and process reviews; identify barriers early and apply sound engineering judgement to provide practical solutions. Own risk identification and mitigation across technical feasibility, quality, cost and delivery; maintain project risk and lessons-learned registers. Manage stakeholders across sales, DFAM/design, quality, production and the customer, providing clear status reporting and timely escalation. Review inspection and test data (dimensional, radiography, UT, MPI/DPI, PMI and hardness, hydrostatic and pneumatic test records, material certificates) and disposition non-conformances with the responsible design engineer. Support Quality in preparing Inspection & Test Plans (ITPs), coordinate third-party and authorised-inspector involvement, and ensure supplier compliance to ASME, API, ASTM and customer specifications. Support estimation and tendering by defining the manufacturing journey, fabrication, welding, NDT and testing costing inputs and realistic lead times for static equipment scopes. Coordinate reverse-engineering and spare-parts projects for legacy static equipment and internals, justifying OEM design and material adaptations where required to achieve manufacturability and code compliance.<br>Scope of Authority Works closely with sales, DFAM/design, quality, production and external suppliers. Authorised to direct supplier technical execution and disposition assigned project deliverables within the project management framework.<br>Accountabilities Strict adherence to the Company's Policies & Procedures. Operate strictly within the Company ISO framework. Delivery of assigned projects to OTIF, quality and cost targets as per set KPIs.<br>Qualifications and Skills Required Degree in Mechanical, Manufacturing or Welding Engineering (minimum Bachelor's). Minimum 5–6 years' experience in static equipment fabrication within oil & gas, energy or heavy engineering, ideally gained with a pressure-vessel or heat-exchanger fabricator. Deep subject-matter expertise in the design intent and fabrication of pressure vessels, shell-and-tube and air-cooled heat exchangers, columns, storage tanks and piping — including welding processes, weldability of carbon, low-alloy, stainless and clad materials, heat treatment and associated NDT methods. Proven ability to read and interpret 3D models and 2D engineering drawings, including full GD&T and welding callouts. Strong familiarity with ASME VIII Div. 1 and Div. 2, ASME IX and B31.3, TEMA, API (including 650, 660, 661 and 510), ASTM and equivalent standards for materials and applications. Welding or inspection certification (CSWIP, AWS CWI, IWE/IWT or equivalent) is an advantage. Demonstrated project-management capability — planning, scheduling, risk mitigation and stakeholder management. Excellent communicator; tailors technical messaging to internal teams, external customers and suppliers. Knowledgeable in reverse engineering, spare-parts production, inspection and testing. Exceptional attention to detail and accuracy under pressure, with a strong sense of urgency and ownership. Self-motivated team player, effective both independently and across multiple locations and time zones.

???? We're Hiring | Electrical / Mechanical Maintenance Engineer – Heavy Equipment & Diesel Systems<br>A leading company specializing in Airport Ground Support Equipment (GSE) is looking for an experienced Electrical / Mechanical Maintenance Engineer to join its growing technical team.<br>If you have hands-on experience maintaining diesel-powered heavy equipment, Airport Ground Support Equipment (GSE), heavy trucks, construction equipment, forklifts, tractors, or similar mobile machinery, and enjoy field service and technical troubleshooting, we'd love to hear from you.<br>???? Location: 5th Settlement, New Cairo (Field visits to airport sites as required)???? Working Hours: Sunday – Thursday | 9:00 AM – 5:00 PM<br>Key Responsibilities Perform preventive and corrective maintenance for Airport Ground Support Equipment (GSE). Diagnose and repair mechanical, electrical, hydraulic, pneumatic, and diesel-related faults. Inspect, troubleshoot, test, and repair equipment to ensure maximum reliability and availability. Perform on-site maintenance, troubleshooting, and after-sales technical support at customer locations. Prepare maintenance reports, service records, and technical documentation. Ensure all maintenance activities comply with company safety procedures and quality standards. Travel to customer sites as required (approximately 60% of field work is within Cairo).<br>Requirements✔ Bachelor's Degree in Mechanical Engineering or Electrical Engineering.✔ 5–8 years of hands-on maintenance experience in diesel-powered heavy equipment, Airport Ground Support Equipment (GSE), heavy trucks, construction equipment, forklifts, tractors, or similar mobile machinery.✔ Strong troubleshooting and fault diagnosis skills in:Diesel engines Hydraulic systems Electrical systems Pneumatic systems Mechanical components✔ Experience performing preventive, corrective, and breakdown maintenance.✔ Comfortable working in the field and traveling to customer sites when required.✔ Candidates residing in or near New Cairo or the 5th Settlement are preferred.<br>Preferred Background Candidates with experience in one or more of the following will be highly preferred:Airport Ground Support Equipment (GSE) Heavy trucks and commercial vehicles Construction and earthmoving equipment Diesel-powered forklifts Mobile cranes Fleet maintenance workshops Heavy equipment dealerships Equipment rental companies Diesel engine service centers Please Note: This role primarily focuses on the maintenance of diesel-powered mobile equipment. Candidates whose experience is mainly limited to factory production lines, power plants, or stationary industrial equipment may not be the best fit for this position.<br>Compensation & Benefits✅ Social Insurance✅ Transportation covered for business missions✅ Company-sponsored travel and accommodation for work outside Cairo✅ Technical training and professional development<br>If you're interested or know someone who fits this role, please send your CV to hrteamvoleya@gmail.com