Materials Engineer Jobs

KEY RESPONSIBILITIES:• Develop architectural designs, design concepts, and space planning for large-scale retail commercial,healthcare, residential and mixed-use projects including floor plans, elevations, sections, and 3D visualizations.• Prepare detailed architectural drawings, facade designs, interior layouts, and finishing details in coordination with structural and MEP engineers.• Conduct architectural design reviews, value engineering studies, and design optimization to ensure aesthetic quality, functionality, and cost-effectiveness.• Review and verify architectural drawings, shop drawings, and design submittals prepared by consultants, subcontractors, and draughtsman.• Prepare technical specifications, material schedules, door and window schedules, and finishing specifications for architectural works.• Coordinate with design consultants, interior designers, and project teams to resolve design issues, clashes, and technical challenges.• Develop facade designs, cladding systems, curtain wall details, and architectural feature elements ensuring compliance with design intent and technical requirements.• Prepare architectural details for joinery, ceiling systems, wall sections, and finishing elements with attention to constructability and installation methods.• Ensure compliance with Saudi Building Code (SBC), accessibility standards, fire safety codes, and project specifications.• Support construction teams by providing technical guidance, design clarifications, and on-site design support during execution.• Review method statements, mock-ups, material samples, and construction details for architectural quality and compliance.• Participate in design coordination meetings, design charrettes, and client presentation sessions.• Prepare design presentations, 3D renderings, material boards, and design reports for management review and client approval.• Utilize design software including Auto CAD, Revit, Sketch Up, 3ds Max, or equivalent tools for design development and visualization.• Stay updated on latest architectural design trends, building materials, and construction technologies.<br>QUALIFICATIONS & REQUIREMENTS:Education:• Bachelor's Degree in Architecture or Architectural Engineering from a recognized university.• Master's Degree in Architecture is an advantage. Experience:• Minimum 10 to 15 years of experience as an Architectural Designer or Technical Architect in construction or design consultancy.• Proven experience working on large-scale retail commercial, healthcare, residential and mixed-use projects• Strong background in architectural design, detailing, facade design, and technical coordination for building projects.<br>Technical Skills:• Advanced proficiency in Auto CAD, Revit, and BIM for architectural design and documentation is mandatory.• Strong knowledge of Sketch Up, 3ds Max, Lumion, or equivalent 3D modeling and rendering software.• Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign) for design presentations.• Strong knowledge of architectural design principles, building codes, and material specifications.• Solid understanding of Saudi Building Code (SBC), accessibility codes, and fire safety regulations.• Ability to read and interpret structural and MEP drawings and coordinate multidisciplinary designs.• Familiarity with BIM coordination and clash detection processes.• Knowledge of facade engineering, curtain wall systems, and architectural detailing.

NoVi Designs & Finishing is hiring a Planning & Cost Control Engineer with strong experience in construction, fit-out, finishing and MEP projects.<br>Employment type: Full-Time Work arrangement: On-Site<br>The successful candidate will be responsible for maintaining realistic project schedules, tracking progress, controlling costs and helping project teams deliver within approved timelines and budgets.<br>Key responsibilities:Develop detailed baseline schedules using Primavera P6. Create project WBS structures, activity logic, dependencies, resources and milestones. Continuously update schedules based on actual site progress and approved changes. Prepare weekly, monthly and look-ahead schedules. Monitor critical paths, float consumption, delays and schedule risks. Develop recovery and acceleration plans with project teams. Measure physical and financial progress against approved baselines. Prepare S-curves, progress dashboards, manpower histograms and productivity reports. Establish project budgets and cost-control structures. Track actual, committed and forecast costs. Prepare cost-to-complete and Estimate at Completion reports. Monitor budget variance, cash flow, billing, procurement and subcontractor costs. Support material planning, procurement optimization and purchase-cost savings. Review BOQs, material quantities, purchase orders, invoices and progress payments. Apply earned value management, including CPI and SPI analysis. Support variation-order evaluation, claims, delay analysis and extension-of-time documentation. Maintain accurate project and cost data using Odoo. Coordinate with site, procurement, finance, commercial and project-management teams.<br>Required qualifications:Bachelor’s degree in Civil Engineering is strongly preferred. Proven experience in planning and cost control for construction, fit-out, finishing and MEP projects. Advanced hands-on Primavera P6 proficiency. Solid Odoo experience is mandatory. Advanced Microsoft Excel and reporting skills. Strong understanding of project schedules, BOQs, budgets, procurement and cash flow. Knowledge of earned value management and cost forecasting. Ability to interpret drawings, specifications and technical project documents. Strong analytical, communication and problem-solving capabilities. Experience working with multidisciplinary site and project teams.<br>Primary KPIs:Schedule variance and milestone adherence Cost variance against approved budget CPI and SPI performance Forecast and cost-to-complete accuracy Procurement and material-cost savings Timeliness and accuracy of schedule updates Cash-flow forecast accuracy Recovery-plan effectiveness Progress-reporting accuracy Variation and claim documentation quality<br>Required Skills:Planning Engineering Cost Control Primavera P6, Odoo Construction Planning, Project Controls, Earned Value Management Critical Path Method, Cash-Flow Forecasting Budget Control, Cost Forecasting, BOQQuantity Take-Off, Procurement Planning Delay Analysis, S-Curves MEP, Fit-Out and Civil Engineering.

About Smart System<br>Smart System is a leading technology solutions and system integration provider with a proven regional footprint across the Middle East, North Africa, and Africa since 2007. We partner with enterprises and government organizations to accelerate digital transformation — delivering secure, scalable, and high-performance IT solutions across data center infrastructure, hybrid cloud, cybersecurity, enterprise platforms, and advanced networking.<br>Job Summary<br>We are looking for a technically strong and customer-focused Presales Engineer to support our sales team in designing, presenting, and proposing Data Center, Storage, Backup, and Disaster Recovery (DR) solutions. The ideal candidate will bridge the gap between customer requirements and technical solutions, working closely with vendors (Dell EMC, HPE, Net App, Cisco, Veeam, Commvault, VMware, Nutanix, etc.) to deliver compelling proposals and ensure successful technical wins.<br>Key Responsibilities<br>Engage with the sales team and clients to understand business and technical requirements related to data center infrastructure, storage, backup, and DR. Design end-to-end solutions covering servers, storage (SAN/NAS), backup & recovery, virtualization, and hyper-converged infrastructure (HCI). Prepare technical proposals, Bill of Materials (BOMs), High-Level Designs (HLDs), and Low-Level Designs (LLDs). Deliver technical presentations, product demos, and Proof of Concepts (POCs) to customers. Respond to RFPs/RFQs/RFIs with accurate technical content and competitive solution architecture. Collaborate with OEM vendors (Dell, HPE, Net App, IBM, Veeam, Commvault, Veritas, Cisco, etc.) to get the best pricing, technical support, and certifications. Conduct sizing and capacity planning for storage and backup environments. Support pre-sales activities such as site surveys, technical workshops, and customer training sessions. Stay updated on the latest data center, storage, backup, cloud, and hyper-converged technology trends. Assist in transitioning closed deals to the implementation/delivery team with clear documentation. Maintain strong relationships with vendor presales/technical teams for escalation and support.<br>Required Skills & Qualifications<br>Bachelor's degree in Computer Science, Information Technology, Engineering, or related field.3–7 years of experience in a Presales/Solutions Engineer role focused on Data Center, Storage, and Backup technologies. Strong knowledge of:Storage: SAN, NAS, All-Flash Arrays, Hybrid Storage (Dell EMC Power Store/Unity, Net App, HPE Storage, Pure Storage, etc.) Backup & DR: Veeam, Commvault, Veritas Net Backup, Dell Avamar/Data Domain, replication & DR strategies Servers & Compute: Dell, HPE, Cisco UCS, Lenovo Virtualization: VMware v Sphere, Microsoft Hyper-V, Nutanix HCINetworking basics: SAN switches (Brocade, Cisco MDS), LAN/WAN fundamentals Cloud & Hybrid Cloud: Azure, AWS, or hybrid backup/DR solutions (nice to have) Experience preparing technical documentation (HLD/LLD, BOQs, proposals). Strong presentation and communication skills (Arabic & English). Ability to manage multiple opportunities and work under pressure with tight deadlines.<br>Preferred Certifications<br>Dell EMC Proven Professional (Storage/Backup) HPE Sales/Technical Certifications Net App NCDA / NCIEVMware VCPVeeam VMCE / Sales Professional Cisco CCNA/CCNP (Data Center) Nutanix NCSA<br>Soft Skills<br>Strong client-facing and consultative selling skills. Excellent problem-solving and analytical thinking. Ability to translate technical jargon into business value for customers. Team player who can work cross-functionally with sales, delivery, and vendor teams.<br>What We Offer<br>Competitive salary + commission/incentives Vendor certification & training sponsorship Health insurance & other benefits Career growth in a leading systems integrator

About Smart System<br>Smart System is a leading technology solutions and system integration provider with a proven regional footprint across the Middle East, North Africa, and Africa since 2007. We partner with enterprises and government organizations to accelerate digital transformation — delivering secure, scalable, and high-performance IT solutions across data center infrastructure, hybrid cloud, cybersecurity, enterprise platforms, and advanced networking.<br>Job Summary<br>We are looking for a technically strong and customer-focused Presales Engineer to support our sales team in designing, presenting, and proposing Data Center, Storage, Backup, and Disaster Recovery (DR) solutions. The ideal candidate will bridge the gap between customer requirements and technical solutions, working closely with vendors (Dell EMC, HPE, Net App, Cisco, Veeam, Commvault, VMware, Nutanix, etc.) to deliver compelling proposals and ensure successful technical wins.<br>Key Responsibilities<br>Engage with the sales team and clients to understand business and technical requirements related to data center infrastructure, storage, backup, and DR. Design end-to-end solutions covering servers, storage (SAN/NAS), backup & recovery, virtualization, and hyper-converged infrastructure (HCI). Prepare technical proposals, Bill of Materials (BOMs), High-Level Designs (HLDs), and Low-Level Designs (LLDs). Deliver technical presentations, product demos, and Proof of Concepts (POCs) to customers. Respond to RFPs/RFQs/RFIs with accurate technical content and competitive solution architecture. Collaborate with OEM vendors (Dell, HPE, Net App, IBM, Veeam, Commvault, Veritas, Cisco, etc.) to get the best pricing, technical support, and certifications. Conduct sizing and capacity planning for storage and backup environments. Support pre-sales activities such as site surveys, technical workshops, and customer training sessions. Stay updated on the latest data center, storage, backup, cloud, and hyper-converged technology trends. Assist in transitioning closed deals to the implementation/delivery team with clear documentation. Maintain strong relationships with vendor presales/technical teams for escalation and support.<br>Required Skills & Qualifications<br>Bachelor's degree in Computer Science, Information Technology, Engineering, or related field.3–7 years of experience in a Presales/Solutions Engineer role focused on Data Center, Storage, and Backup technologies. Strong knowledge of:Storage: SAN, NAS, All-Flash Arrays, Hybrid Storage (Dell EMC Power Store/Unity, Net App, HPE Storage, Pure Storage, etc.) Backup & DR: Veeam, Commvault, Veritas Net Backup, Dell Avamar/Data Domain, replication & DR strategies Servers & Compute: Dell, HPE, Cisco UCS, Lenovo Virtualization: VMware v Sphere, Microsoft Hyper-V, Nutanix HCINetworking basics: SAN switches (Brocade, Cisco MDS), LAN/WAN fundamentals Cloud & Hybrid Cloud: Azure, AWS, or hybrid backup/DR solutions (nice to have) Experience preparing technical documentation (HLD/LLD, BOQs, proposals). Strong presentation and communication skills (Arabic & English). Ability to manage multiple opportunities and work under pressure with tight deadlines.<br>Preferred Certifications<br>Dell EMC Proven Professional (Storage/Backup) HPE Sales/Technical Certifications Net App NCDA / NCIEVMware VCPVeeam VMCE / Sales Professional Cisco CCNA/CCNP (Data Center) Nutanix NCSA<br>Soft Skills<br>Strong client-facing and consultative selling skills. Excellent problem-solving and analytical thinking. Ability to translate technical jargon into business value for customers. Team player who can work cross-functionally with sales, delivery, and vendor teams.<br>What We Offer<br>Competitive salary + commission/incentives Vendor certification & training sponsorship Health insurance & other benefits Career growth in a leading systems integrator

Company Description El Sewedy – AHMED SADEK 1983 is a longstanding global leader in the electrical and equipment industry, founded in 1938 and recognized for its reliability and performance. Over more than 85 years, the brand has built a strong customer base through high-quality, innovative products and solutions, including cables and wires, electrical systems, lighting solutions, tools, and more. The company emphasizes sustainability and social responsibility, working to reduce environmental impact while supporting the communities it serves. Its commitment to excellence, innovation, and sustainable practices shapes its products, initiatives, and partnerships. El Sewedy – AHMED SADEK 1983 aims to empower customers and stakeholders to excel in their fields and contribute positively to the world. Role Description The Product Support Engineer is a full-time, on-site role based in New Cairo, responsible for providing technical and product-related assistance to customers and internal teams. Day-to-day tasks include diagnosing and resolving product issues, guiding customers through troubleshooting steps, and documenting solutions for recurring problems. The role involves collaborating with engineering, quality, and sales teams to escalate complex cases, relay product feedback, and support continuous improvement. The Product Support Engineer will prepare technical reports, maintain support documentation, and contribute to knowledge bases and training materials. This position also requires proactive communication with customers to ensure timely resolution, high satisfaction, and adherence to company standards. Qualifications Strong Product Support expertise, with experience handling electrical equipment or related technical products. Demonstrated Customer Support skills, including clear communication, empathy, and professional follow-up. Technical Support capabilities, with hands-on experience in diagnosing and resolving technical issues. Solid Analytical Skills, with the ability to interpret data, identify root causes, and propose effective solutions. Advanced Troubleshooting abilities for hardware, software, and system-related product challenges. Bachelor’s degree in Electrical Engineering, or a related technical field. Familiarity with electrical systems, industrial equipment, and safety standards is highly beneficial. Proficiency in using support tools, ticketing systems, and technical documentation platforms. Ability to work on-site in New Cairo, manage multiple cases, and collaborate with cross-functional teams. Exp 0-1 Year

Company Description EAST – ENGINEERING AND SERVICES TECHNOLOGY (EAST) is a joint stock company delivering innovative engineering solutions and services to local and regional markets. Originating from a family-owned business with over 60 years of experience in construction and road building, EAST has grown into a key player in major infrastructure, energy, and industrial sectors. The company’s activities span from simple equipment supply to complete EPC (Engineering, Procurement, and Construction) projects. EAST is structured into three main business sectors: E_Roads for roads-related plants and machines, E_RAIL for rail and track machinery and products, and E_Industries for industrial engineering solutions. This diversity provides engineering professionals with opportunities to work on complex, multidisciplinary projects and develop long-term careers.<br>Key Responsibilities:Prepare and develop detailed plate work and steel fabrication drawings using Auto CAD and Solid Works or Tekla. Review and verify engineering designs to ensure compliance with technical specifications and quality standards. Produce shop drawings, erection drawings, fabrication details, and Bills of Materials (BOMs). Ensure all detailing outputs meet project timelines and quality requirements. Advanced skills (3D modeling & 2D drawings).<br>Requirements:Minimum 4–7 years of experience in plate work detailing. Strong background in structures such as tanks, silos, pressure vessels, ducting, and hoppers. Excellent command of Auto CAD and Solid Works or Tekla. Experience in both Solid Works and Tekla is preferred. Good knowledge of welding types, their applications, and welding symbols.

Job Responsibilities:Responsible for designing, developing, and managing tenders for projects. Participate in the bidding process by providing accurate cost estimation Comply to the tendering policies & procedures Support Tendering Manager in the preparation of client requirements & proposal preparation information Support Tendering Manager in the pre-qualification bid stage in terms of quantifying cost factors, rates, materials and labour expenses Ensure product technical compliance with the client requirements’Collect information & verify updated market prices, new suppliers in alignment with the Procurement Department based on previously executed projects Prepare profit and loss report Prepare technical offers in alignment with Tendering Director Study and evaluate received subcontractors’ offers Estimate the project's cost and pricing in terms of dry cost, labor cost…etc. Negotiate with suppliers on the lead time, cost, and quality so as to obtain the maximum benefit for the company Review and manage the supplier base to ensure consistency with the sourcing strategy. Review/assess technical specifications, BOQ, and drawings to determine suitable vendors and suppliers. Prepare subcontractors' and suppliers’ packages and issue requests for quotations to qualified vendors as per project approved vendor list. Prepare proposals for technical and commercial offers.<br>Required Qualifications:Bachelor’s degree in electrical engineering From 6 – 8 Years in a similar role. Excellent Knowledge of Power & Low current systems. Construction background is a must Analytical & planning skills. Manage differences and teamwork effectiveness. Excellent MS capabilities. Good user of Auto CAD. Very good command of English language.

Job Responsibilities:Review and validate shop drawings to ensure compliance with project specifications, standards, and design intent. Plan, schedule, and manage daily site activities in alignment with project timelines and milestones. Supervise and monitor execution of Electrical works on site to ensure quality, safety, and adherence to approved drawings. Manage and coordinate subcontractors’ activities, ensuring productivity, quality of work, and contractual compliance. Deliver completed works to consultants and customers, ensuring proper inspection, testing, and approvals. Review and verify subcontractor invoices, work progress, and material deliveries before approval. Prepare and submit regular progress reports and updates to the Project Manager. Coordinate closely with Mechanical and civil site engineers to ensure smooth integration of MEP works. Ensure all site activities comply with safety regulations, company policies, and project standards. Identify and resolve technical issues, clashes, and site challenges proactively. Monitor material usage, wastage, and site resources to control costs effectively.<br>Required Qualifications:Bachelor’s Degree in Electrical Engineering. Additional certifications in MEP, LV/MV systems, or project management are a plus. Minimum 5 years of experience in electrical site engineering within construction/MEP projects. Experience in large-scale construction or MEP projects is preferred. Proven experience in managing site execution, subcontractors, and project delivery. Experience in large-scale or multi-disciplinary projects is preferred. Strong knowledge of electrical systems including LV/MV distribution, lighting, earthing, fire alarm, and BMS integration. Solid understanding of shop drawings, technical submittals, and construction documentation. Ability to manage and coordinate project activities efficiently on-site. Familiarity with local electrical codes, standards, and authority requirements (e.g., NFPA, IEC, NEC). Proficiency in Auto CAD and Microsoft Office; knowledge of Revit MEP or ETAP is an advantage.

· Role & responsibilities<br><br>· Design and Estimation Engineer of fire protection systems, including fire sprinklers, fire detection & alarms, suppression systems, and more.· Apply expertise in fire protection engineering principles to ensure compliance with codes (NFPA), standards, and Local regulations (SEC, HCIS SAF, SWCC).· Utilize your specialized knowledge to estimate costs for fire protection system installations, upgrades, and retrofits.· Analyze project requirements and specifications to accurately assess material, equipment, labor, and installation costs.· Develop detailed and itemized cost estimates for client proposals and internal project planning.· Manage the design and estimation phases of fire protection projects, from initial concept to final proposal.· Coordinate with engineering teams to ensure seamless integration of fire protection systems and timely completion of milestones.· Optimize fire protection designs for efficiency, reliability, and safety while considering the unique needs of each project.· Create and maintain comprehensive documentation of fire protection system designs, calculations, and cost estimates.· Prepare technical reports and proposals that convey design rationale, cost breakdowns, and compliance with regulations.· Conduct site visit / Site survey for Estimation of Fit out / project jobs.· Knowledge of well-known brands such as Simplex / Notifier / Kidde is an added advantage for candidate<br>.<br>Requirement<br>s:<br>· Bachelor's degree in Fire Protection Engineering, Fire alarm / Detection, Mechanical Engineering, or a related field.· Minimum of 3 years of experience specifically focused on fire Detection / protection system design and cost estimation. Or 5+ years of experience in MEP engineering & estimation.· Proficiency in design software relevant to fire protection systems (e.g., Auto CAD, Hydraulic Calculations) and other industry too<br>ls.

Job Description:· Design and Estimation Engineer of fire protection systems, including fire sprinklers, fire detection & alarms, suppression systems, and more.· Apply expertise in fire protection engineering principles to ensure compliance with codes (NFPA), standards, and Local regulations (SEC, HCIS SAF, SWCC).· Utilize your specialized knowledge to estimate costs for fire protection system installations, upgrades, and retrofits.· Analyze project requirements and specifications to accurately assess material, equipment, labor, and installation costs.· Develop detailed and itemized cost estimates for client proposals and internal project planning.· Manage the design and estimation phases of fire protection projects, from initial concept to final proposal.· Coordinate with engineering teams to ensure seamless integration of fire protection systems and timely completion of milestones.· Optimize fire protection designs for efficiency, reliability, and safety while considering the unique needs of each project.· Create and maintain comprehensive documentation of fire protection system designs, calculations, and cost estimates.· Prepare technical reports and proposals that convey design rationale, cost breakdowns, and compliance with regulations.· Conduct site visit / Site survey for Estimation of Fit out / project jobs.· Knowledge of well-known brands such as Simplex / Notifier / Kidde is an added advantage for candidate.<br><br>Requirements· Bachelor's degree in Fire Protection Engineering, Fire alarm / Detection, Mechanical Engineering, or a related field.· Minimum of 3 years of experience specifically focused on fire Detection / protection system design and cost estimation. Or 5+ years of experience in MEP engineering & estimation.· Proficiency in design software relevant to fire protection systems (e.g., Auto CAD, Hydraulic Calculations) and other industry tools<br>.

<ul><li data-section-id="1g39152" data-start="4887" data-end="5094">Coordinate all civil and structural design activities related to EHV substation projects to ensure timely and accurate development of engineering deliverables in compliance with project requirements.</li><li data-section-id="119ekbd" data-start="5095" data-end="5243"><p>Act as the focal point for civil design coordination between the engineering consultant, EPC contractor, client, and internal project teams.</p><p>&nbsp;</p></li><li data-section-id="leja0f" data-start="6200" data-end="6376">Review submitted drawings and documents for completeness, technical consistency, constructability and interface compliance prior to submission to the client/consultant.</li><li data-section-id="1drkuo4" data-start="6377" data-end="6555">Support the preparation, review and coordination of\:<ul data-start="6434" data-end="6555"><li data-section-id="8gehun" data-start="6434" data-end="6448">RFIs / TQs</li><li data-section-id="g04759" data-start="6451" data-end="6476">Design clarifications</li><li data-section-id="1bwbuph" data-start="6479" data-end="6504">Design change notices</li><li data-section-id="15bhnt1" data-start="6507" data-end="6555">Value engineering proposals where applicable</li></ul></li><li data-section-id="i4enzm" data-start="2617" data-end="3129">Strong technical knowledge of civil and structural design for EHV substations, including\:<ul data-start="2715" data-end="3129"><li data-section-id="duo3gj" data-start="2715" data-end="2800">Reinforced concrete design concepts for heavy equipment foundations and buildings</li><li data-section-id="15zmqvi" data-start="2803" data-end="2860">Steel structure foundations and structural interfaces</li><li data-section-id="71nlnt" data-start="2863" data-end="2929">Building layouts and substation civil arrangement requirements</li><li data-section-id="p3s329" data-start="2932" data-end="3000">Cable trench, duct bank and utility corridor design coordination</li><li data-section-id="19sjl2f" data-start="3003" data-end="3063">Site grading, earthworks and finished level coordination</li><li data-section-id="1qclrbw" data-start="3066" data-end="3129">Drainage, oil containment and external infrastructure works</li></ul></li><li data-section-id="81jexy" data-start="3130" data-end="3381">Ability to review and coordinate\:<ul data-start="3168" data-end="3381"><li data-section-id="nif1vx" data-start="3168" data-end="3192">Design basis reports</li><li data-section-id="poryb7" data-start="3195" data-end="3227">General arrangement drawings</li><li data-section-id="1uqmig6" data-start="3230" data-end="3270">Civil and structural design drawings</li><li data-section-id="u9c4rl" data-start="3273" data-end="3320">Foundation schedules and structural details</li><li data-section-id="1q5rnoo" data-start="3323" data-end="3381"><p>Technical specifications, BOQs and material submittals</p><p>&nbsp;</p></li></ul></li><li data-section-id="15l3txp" data-start="3971" data-end="4120">Strong capability in multidisciplinary design coordination, ensuring all civil deliverables are aligned with electrical and MEP requirements.</li><li data-section-id="1i55tjp" data-start="4121" data-end="4245">Ability to identify design clashes, constructability issues, missing information and interface gaps at early stages.</li><li data-section-id="1ncvtgl" data-start="4246" data-end="4527">Proficiency in reviewing and coordinating engineering deliverables using\:<ul data-start="4324" data-end="4527"><li data-section-id="1hus90h" data-start="4324" data-end="4339">AutoCAD</li><li data-section-id="1dwp0bh" data-start="4342" data-end="4385">MS Office (Excel, Word, PowerPoint)</li><li data-section-id="f1sr3q" data-start="4388" data-end="4431">PDF mark-up / document review tools</li><li data-section-id="17s3u0m" data-start="4434" data-end="4527">Familiarity with BIM / Navisworks / common data environment platforms is an advantage</li></ul></li></ul>

Algihaz Holding is seeking a detail‑oriented and proactive Electrical Procurement Engineer to join our growing team in Cairo<br>What you’ll do<br>Prepare procurement plan for receiving and tracking of assigned categories to optimize quality, cost, and timely delivery criteria. Responsible to keep contractual and delivery dates updated and accurate for released POs. Analyze and evaluate all purchasing requisitions to ensure clarity and completeness in description of material and equipment. Prepare and issue requests for quotations to qualified vendors as per approved vendor list. Responsible to negotiate with suppliers within expected time frame Interview prospective suppliers either face-to-face or over the phone to determine scope, prices, discounts, terms to ensure that target prices, company’s terms and conditions are met. Preliminary review the received technical and commercial offers, prepare comparative analysis and coordinate with technical departments that all clarifications are cleared. Prepare the comparison evaluation and approval forms and getting the required signatures. Prepare purchase orders on ERP complying with received PRs and in accordance with selected suppliers, price and technical approval. Provide updates about procurement related progress and potential delays on a weekly basis. Conduct site visits with suppliers, if required, to evaluate their abilities and performance metrics and negotiate agreements Follow and support returns, damage replacements, and warranty claims<br>What you'll need<br>Bachelor’s degree in electrical engineering3-5 years of experience in negotiating with suppliers and subcontractors.3 years of experience in the field of construction of power and energy projects is a must. Proven experience in Electrical works, MEP Construction Companies. Effective communication skills. Excellent negotiation skills. Problem-solving skills. Critical thinking and attention to details

We are seeking a highly skilled Technical Sourcing Engineer to join our team in Zahraa al Maadi - Cairo-Egypt The ideal candidate will have a proven track record in analyzing technical requirements for industrial plant spare parts, including valves, pumps, heat exchangers, compressors, and more. This role will involve managing a high volume of RFQs, conducting in-depth vendor research, and negotiating favorable terms for purchases.<br>Key Responsibilities• Technical Analysis: Expertly assess technical requirements for industrial plant spare parts, ensuring accurate identification and sourcing of suitable components.• Purchase Requisition Management: Prepare and review purchase requisitions, ensuring compliance with company standards and procurement processes.• Vendor Research and Evaluation: Conduct thorough research to identify and evaluate potential vendors, both locally and globally, for non-stock item purchases.• Vendor Management: Maintain strong relationships with vendors and equipment suppliers, ensuring updated part numbers, insurance certificates, and safety regulations are adhered to.• Advanced Sourcing: Demonstrate proficiency in advanced online search and comparison techniques to identify the most competitive suppliers.• Negotiation: Effectively negotiate prices and delivery terms with vendors to achieve optimal outcomes.• Non-Registered Vendor Sourcing: Possess expertise in sourcing from non-registered vendors, navigating potential challenges and risks.• RFQ Management: Efficiently manage a high volume of RFQs, ensuring timely responses and accurate evaluation.<br>Qualifications• Bachelor's degree in Engineering.• Minimum 1 year of experience in material buying for a power plant, petrochemical plant, or industrial plant.• Excellent English communication skills, both verbal and written.<br>If you are interested to apply, kindly send your updated CV to hend@btc-ksa.com mention job title in email subject

Job Description :- Manage and supervise landscape, irrigation, and agricultural works across project phases.- Review and approve drawings, specifications, and material submittals.- Monitor site activities to ensure compliance with quality standards and project requirements.- Coordinate with consultants, contractors, and project stakeholders.- Conduct site inspections and resolve technical issues.- Ensure timely project delivery within approved schedules.- Prepare progress reports and project documentation.<br>Requirements :- Bachelor's Degree in Agricultural Engineering or related field.- Minimum 10 years of experience in landscape and irrigation projects.- Experience in large-scale mixed-use, infrastructure, or hospitality projects.- Strong knowledge of landscape construction and irrigation systems.- Proficiency in Auto CAD and Microsoft Office.

<figure class="table"><table><tbody><tr><td><p>JD :&nbsp;</p><ul><li>Have a signature for all in going communications and direct communication with the PM.</li><li>Execute works in compliance with contract specs, project design and as within approved baseline.</li><li>Ensure all contract documents, work and quality procedures are in the latest approved revision.</li><li>Coordinate all jobsite activities ,including actions of VK, subcontractors, suppliers, PM and client from commencement to close out of the project.</li><li>Coordinate and manage approved construction methods, shop drawings, material and equipment requirements.</li><li>Coordinate with contractor to identify, where possible, the construction solutions, methodologies.</li><li>Maintains client relationship as primary contact for client’s communication with field activities.</li><li>Represents role model ethically &amp; technically for his team and a good image for the firm.</li></ul><p>&nbsp;</p></td></tr></tbody></table></figure>

Job Description:Review and analyze drawings, specifications, and BOQsPrepare quantity take-offs and cost estimates Develop and review shop drawings Prepare and follow up on project schedules (Primavera / MS Project) Handle interim payments (IPCs) and invoices Prepare and evaluate variation orders and claims Coordinate between site team, consultants, and management Monitor project progress and prepare reports Follow up on material submittals and approvals Ensure alignment with project scope, time, and budget<br>Requirements Bachelor’s Degree in Civil Engineering7–10+ years in Technical Office role Experience in roads / infrastructure projects preferred Proficiency in Auto CAD, Excel, Primavera, Civil 3DStrong experience in roads works (asphalt – base layers – infrastructure) Strong knowledge of quantity surveying and cost estimation

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Siemens Digital Industries Software is a leading provider of solutions for the design, simulation, and manufacture of products across many different industries. Formula 1 cars, skyscrapers, ships, space exploration vehicles, and many of the objects we see in our daily lives are being conceived and manufactured using our Product Lifecycle Management (PLM) software. Position Overview: Join the Calibre Product Management Team as a Product Engineer and shape the future of semiconductor design and verification tools. You'll bridge the gap between customers, field engineers, and our software development teams, delivering expert technical support and driving product innovation. This role is ideal for both experienced professionals and fresh graduates who are passionate about semiconductor technology and want to make a direct impact on how our industry-leading tools evolve. You'll work on the Calibre LSG product, analyzing market needs, defining product enhancements, and developing solutions that address real customer challenges. Key Responsibilities: • Provide expert-level technical support and deliver comprehensive training to customers and Application Engineers • Drive product innovation through direct interaction with software engineering teams, field engineers, and customers • Lead customer engagement by effectively communicating product value propositions and benefits • Analyze market needs and identify opportunities for product enhancements • Define and characterize new tool capabilities and develop prototypes • Develop and document product requirements based on customer feedback and market analysis • Collaborate with cross-functional teams to ensure successful feature implementation • Create and maintain technical documentation and training materials Required Qualifications Education: BS/MS in Electrical Engineering, Electronics Engineering, or a related field. Technical Requirements: Basic knowledge of design and physical verification. Prior experience with or knowledge of CAD tool usage and/or development. Prior knowledge of semiconductor manufacturing and process engineering is preferred. Strong scripting skills (e.g., Shell scripting and Python) for automation and workflow management in UNIX/Linux environments. Familiarity with AI concepts and an understanding of their potential applications in semiconductor design and verification is preferred. Both experienced professionals and fresh graduates are encouraged to apply. Professional Competencies: Exceptional problem-solving and analytical skills. Excellent verbal and written communication and presentation skills. Strong team player with a collaborative mindset. Outstanding customer and AE relationship management skills. Fluency in English. Ability to adapt to dynamic work environments. Strong self-motivation and a goal-oriented mindset. Why Us At Siemens Software, flexibility is how we work—hybrid by default, built on trust and autonomy. Together, 30,000 people across more than 200 countries build technology that shapes the real world. You'll grow through real projects, strong technical peers, and global mobility, backed by the scale and benefits of an industrial software leader. We're committed to equality and inclusion, and we hire based on merit, skills, and impact. Bring your curiosity and creativity and help us shape tomorrow! Our Commitment to Equity and Inclusion in our Diverse Global Workforce We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us. Compensation &amp; Benefits The salary range for this position is&nbsp;$33,500 to $67,000 and this role is eligible to earn incentive compensation. The actual compensation offered is based on the successful candidate's job-related skills, experience, and relevant education/training. Siemens offers health and wellness benefits to employees; you can access the benefits available in your country via the link: https://jobs.sw.siemens.com/benefits/ Location Cairo, Egypt Siemens Software. Transform the Everyday #LI-Hybrid #LI-EDA</span> </div>

Role Summary/Purpose The Cabinet Design Engineer’s primary responsibilities will be to design systems and hardware in compliance with applicable engineering standards and specifications.<br>Key Responsibilities • Using CAD, Micro Station, E-Plan, software to create and revise Project Drawings (System Layout and wiring, Loop drawings)• Supporting manufacturing related technical questions and independently lead part creation and cabinet designing• Ensuring expected results in term of quality, execution time, and cost (within control)• Recommending design enhancements or modifications to achieve project objectives<br> Required Qualifications• Bachelor’s degree in electrical engineering • 1-3 Years of experience • Expertise in Auto CAD, E-Plan and Micro Station software• Excellent written and spoken communication in English, with demonstrated capability to structure and write technical material• Proven experience with document layout, formatting, and editing• Must be able to travel to customer sites/factories to meet the business needs • Self-starter with minimal supervision requirement; able to work independently; ability to prioritize, organize work and meet deadlines<br> Skills & Competencies• Ability to read and understand engineering drawings and technical datasheets• Basic understanding of IEC/UL standard applicable for electrical cabinet design• Good analytical and documentation skills• Proficiency in MS Office applications• Willingness to learn and work under technical guidance• Effective communication and teamwork skills

Senior Mechanical Engineer (HVAC + Fire Protection + Plumbing) We are seeking an experienced Senior Mechanical Engineer to lead the design and delivery of HVAC, Fire Protection (FPR), and Plumbing (PLD) systems for complex and themed environments. The role involves end-to-end responsibility from concept design through construction and commissioning, with strong coordination across multidisciplinary teams. Key Responsibilities1. HVAC System Design & Engineering Review and design HVAC systems for indoor and semi-outdoor themed environments, ensuring thermal comfort, indoor air quality, and acoustic performance. Perform load calculations, system sizing, and duct routing in coordination with architectural, structural, and show constraints. Select HVAC equipment, define control strategies, and ensure compliance with energy efficiency and sustainability goals.2. Fire Protection (FPR) Systems Review, design, and specify fire protection systems including sprinklers, water mist, and special hazard systems. Ensure full compliance with NFPA, SBC, and local authority requirements. Coordinate with AHJs, fire consultants, and authorities for approvals, permits, and inspections.3. Plumbing (PLD) Systems Review and develop plumbing system layouts including water supply, drainage, venting, and specialty piping. Specify fixtures, pumps, tanks, interceptors, and treatment systems. Address unique requirements such as themed water features, interactive installations, and non-standard utilities.4. BIM Modeling & Documentation Lead the development of 3D mechanical models (HVAC, FPR, PLD) using Revit. Prepare coordinated construction documentation including drawings, schematics, and details. Manage clash detection and coordination with architectural, structural, and show systems.5. Code Compliance & Engineering Standards Ensure compliance with SBC, ASHRAE, NFPA, IPC, and other applicable standards. Develop technical specifications and design narratives for client reviews and permitting. Stay updated on environmental, health, safety, and energy efficiency regulations.6. Design Coordination & Integration Collaborate closely with architects, creative teams, and engineers to integrate MEP systems within scenic and show-driven environments. Translate creative concepts into technically sound and buildable designs. Participate in interdisciplinary design reviews and coordination meetings.7. Construction Administration & Site Support Review submittals, RFIs, and shop drawings. Conduct site inspections and support testing and commissioning activities. Coordinate with contractors and vendors to resolve construction issues.8. Project Leadership & Team Management Mentor junior engineers and BIM designers. Manage schedules, workloads, and deliverables across multiple projects. Maintain organized documentation, revisions, and version control.9. Quantity Take-Off & BOQ Support Provide mechanical quantities, equipment lists, and material specifications. Assist with technical evaluation of bids, alternates, and vendor proposals.10. QA/QC & Best Practices Perform internal quality reviews for constructability, compliance, and performance. Apply lessons learned and company standards to enhance project outcomes. Ensure system reliability, maintainability, and lifecycle efficiency. Required Skills Leadership of HVAC, Fire Protection, and Plumbing system design from concept through construction. Strong BIM coordination and multidisciplinary clash resolution. Technical leadership during design, documentation, and site execution. Experience mentoring engineers and managing consultants and vendors. Technical Knowledge Strong command of SBC, ASHRAE, NFPA, IPC, and relevant international standards. Advanced understanding of MEP system performance in extreme climate conditions. Lifecycle-based mechanical design with a focus on sustainability and energy efficiency. Personal Attributes Strategic thinker with strong problem-solving skills. Excellent communication and cross-disciplinary collaboration abilities. Quality-driven with a strong commitment to safety and code compliance. Proactive, adaptable, and effective in fast-paced, multicultural environments. Education Bachelor’s Degree in Mechanical Engineering

Senior Mechanical Engineer (HVAC + Fire Protection + Plumbing) We are seeking an experienced Senior Mechanical Engineer to lead the design and delivery of HVAC, Fire Protection (FPR), and Plumbing (PLD) systems for complex and themed environments. The role involves end-to-end responsibility from concept design through construction and commissioning, with strong coordination across multidisciplinary teams. Key Responsibilities1. HVAC System Design & Engineering Review and design HVAC systems for indoor and semi-outdoor themed environments, ensuring thermal comfort, indoor air quality, and acoustic performance. Perform load calculations, system sizing, and duct routing in coordination with architectural, structural, and show constraints. Select HVAC equipment, define control strategies, and ensure compliance with energy efficiency and sustainability goals.2. Fire Protection (FPR) Systems Review, design, and specify fire protection systems including sprinklers, water mist, and special hazard systems. Ensure full compliance with NFPA, SBC, and local authority requirements. Coordinate with AHJs, fire consultants, and authorities for approvals, permits, and inspections.3. Plumbing (PLD) Systems Review and develop plumbing system layouts including water supply, drainage, venting, and specialty piping. Specify fixtures, pumps, tanks, interceptors, and treatment systems. Address unique requirements such as themed water features, interactive installations, and non-standard utilities.4. BIM Modeling & Documentation Lead the development of 3D mechanical models (HVAC, FPR, PLD) using Revit. Prepare coordinated construction documentation including drawings, schematics, and details. Manage clash detection and coordination with architectural, structural, and show systems.5. Code Compliance & Engineering Standards Ensure compliance with SBC, ASHRAE, NFPA, IPC, and other applicable standards. Develop technical specifications and design narratives for client reviews and permitting. Stay updated on environmental, health, safety, and energy efficiency regulations.6. Design Coordination & Integration Collaborate closely with architects, creative teams, and engineers to integrate MEP systems within scenic and show-driven environments. Translate creative concepts into technically sound and buildable designs. Participate in interdisciplinary design reviews and coordination meetings.7. Construction Administration & Site Support Review submittals, RFIs, and shop drawings. Conduct site inspections and support testing and commissioning activities. Coordinate with contractors and vendors to resolve construction issues.8. Project Leadership & Team Management Mentor junior engineers and BIM designers. Manage schedules, workloads, and deliverables across multiple projects. Maintain organized documentation, revisions, and version control.9. Quantity Take-Off & BOQ Support Provide mechanical quantities, equipment lists, and material specifications. Assist with technical evaluation of bids, alternates, and vendor proposals.10. QA/QC & Best Practices Perform internal quality reviews for constructability, compliance, and performance. Apply lessons learned and company standards to enhance project outcomes. Ensure system reliability, maintainability, and lifecycle efficiency. Required Skills Leadership of HVAC, Fire Protection, and Plumbing system design from concept through construction. Strong BIM coordination and multidisciplinary clash resolution. Technical leadership during design, documentation, and site execution. Experience mentoring engineers and managing consultants and vendors. Technical Knowledge Strong command of SBC, ASHRAE, NFPA, IPC, and relevant international standards. Advanced understanding of MEP system performance in extreme climate conditions. Lifecycle-based mechanical design with a focus on sustainability and energy efficiency. Personal Attributes Strategic thinker with strong problem-solving skills. Excellent communication and cross-disciplinary collaboration abilities. Quality-driven with a strong commitment to safety and code compliance. Proactive, adaptable, and effective in fast-paced, multicultural environments. Education Bachelor’s Degree in Mechanical Engineering