Maintenance Technician Jobs in Egypt

ROLE: We are looking for a Broadcast Technician to support the setup and operation of live streaming broadcasts, especially for sports and live events. The role will be responsible for connecting broadcast equipment, configuring live streams, monitoring quality, and troubleshooting technical issues during broadcasts. The following job description details the skills and competencies required for this level.<br>SKILLS AND REQUIREMENTS:Bachelor's degree in Media, Broadcasting, Film Production, Electronics, or a related field.2-3 years of experience in broadcasting, live streaming, or a related technical role. Hands-on experience with cameras, encoders, and live streaming equipment. Good knowledge of RTMP, SRT, HLS, SDI, HDMI, and NDI. Understanding of video encoding, bitrate, resolution, FPS, codecs, and latency. Basic understanding of networking concepts such as bandwidth, latency, packet loss, and connectivity. Good technical knowledge of broadcast workflows, video signal flow, audio systems, and live streaming technologies. Strong troubleshooting and problem-solving skills. Ability to work under pressure during live productions. Experience with sports broadcasting or live events is a plus. Willingness to work flexible hours, including evenings and weekends when required. Ability to work under pressure during live broadcasts. And prioritize tasks during live operations.<br>RESPONSIBILITIES:Set up and configure cameras, PTZ cameras, audio equipment, and encoders. Connect cameras to encoders and configure the complete camera-to-stream workflow. Configure live streams including resolution, frame rate, bitrate, codec, audio, and keyframe settings. Understand and work with streaming protocols such as RTMP, SRT, and HLS. Understand basic video formats and technologies including SDI, HDMI, NDI, and IP video. Monitor live streams for video/audio quality, stability, bitrate, and latency. Troubleshoot issues related to cameras, audio, encoders, network connectivity, and streaming. Perform technical checks before live events and ensure all equipment is ready. Monitor network performance, including upload bandwidth, latency, and packet loss. Support backup solutions such as 4G/5G, secondary internet connections, and backup equipment. Coordinate with the technical and content teams during live events. Document broadcast setups and configurations.PEOPLE :Assist in fostering a high performance led culture Bring along a positive, collaborative, ready to learn attitude at all times Develop SMART performance objectives alongside your line manager Promoting Augustus as a great place to work, ensuring positivity is championed and your team feels prepared to live out the 3 core values <br>PROFESSIONAL DEVELOPMENTBuild on your emotional intelligence and self-awareness Grow your presence in the industry, including relationships within agency partners and industry bodies to support professional stature Complete mandatory training <br>ABOUT AUGUSTUSThe consumption of media is ever present, yet the mediums and the means are ever evolving. We are a ‘New Media’ company, born in one of the most dynamic and vibrant cities in the Middle East. Our vision is to establish and maintain a ‘New Order’ of media advertising with data and content at the heart of everything we do. Augustus is a Middle Eastern digital media company based in Dubai, Cairo and Riyadh and has been designed to adapt and evolve to this perpetually changing media environment. Our mission is to be the ‘New Media’ company of choice in the Middle East by generating profitable growth through innovation and breaking the mold in marketing communications.<br>VALUESWe understand that achieving our mission is based upon strong values and we have identifiedthree that sit right at our core.• Ingenuity: There is a bit of genius in everything we do. We take pride in our creative originality.• Tenacity: Good things come to those who work for them. We always persevere and persist.• Velocity: High level performance is about speed and momentum. We are fast and agile in howwe think, operate and how we act.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Description:</b></p><br><span><b>SAP Plant Maintenance (PM) Consultant</b></span><span><b>Core Experience</b></span><ul><li>Strong experience in <b>SAP Plant Maintenance (PM)</b>, including Equipment Master, Functional Locations, Maintenance Notifications, Maintenance Orders, and Preventive Maintenance.</li><li>Experience in maintenance planning, work order management, scheduling, and execution.</li><li>Strong knowledge of Enterprise Asset Management (EAM) processes and asset lifecycle management.</li><li>Experience integrating SAP PM with <b>Materials Management (MM), Finance (FI),</b> and <b>Project Systems (PS)</b>.</li><li>Knowledge of spare parts management, inventory planning, and maintenance procurement processes.</li><li>Experience with maintenance reporting, KPIs, and asset performance monitoring.</li><li>Exposure to predictive and preventive maintenance strategies is an advantage.</li><li>Experience working on SAP ECC and/or SAP S/4HANA implementations.</li></ul><span><b>Key Competencies</b></span><ul><li><b>8 years</b> of experience in SAP Plant Maintenance (PM) consulting.</li><li>Experience in end-to-end SAP PM implementations, rollouts, enhancements, and support projects.</li><li>Hands-on experience in business process analysis, solution design, system configuration, testing, and user acceptance testing (UAT).</li><li>Experience preparing functional specifications, test scripts, training materials, and end-user documentation.</li><li>Ability to analyze production and maintenance issues, perform root cause analysis, and recommend effective solutions.</li><li>Strong understanding of maintenance business processes and industry best practices.</li><li>Ability to communicate effectively with business stakeholders, gather requirements, and translate them into SAP solutions.</li><li>Strong analytical and problem-solving skills with a customer-focused mindset.</li><li>Ability to manage multiple priorities and work effectively in a collaborative team environment.</li><li>Results-oriented with a strong sense of ownership and accountability.</li><li>Excellent verbal and written communication skills.</li></ul><p><span>At DXC Technology, we believe strong connections and community are key to our success. Our work model prioritizes in-person collaboration while offering flexibility to support wellbeing, productivity, individual work styles, and life circumstances. We’re committed to fostering an inclusive environment where everyone can thrive.</span></p><br><p><b><span>Recruitment fraud is a scheme in which fictitious job opportunities are offered to job seekers typically through online services, such as false websites, or through unsolicited emails claiming to be from the company. These emails may request recipients to provide personal information or to make payments as part of their illegitimate recruiting process. DXC does not make offers of employment via social media networks and DXC never asks for any money or payments from applicants at any point in the recruitment process, nor ask a job seeker to purchase IT or other equipment on our behalf.&nbsp;More information on employment scams is available</span></b>&nbsp;<span>here</span><span><b><i>.</i></b></span></p><br> </div>

We are looking for a professional Maintenance Contracts Sales Specialist to join our team.if you're interested or know someone who would be a great fit, kindly send the C. V to career@comtec.com.eg<br>Key Responsibilities Build and maintain strong relationships with existing and potential customers. Promote, negotiate, and sell maintenance and service contracts. Follow up with out-of-warranty customers to convert them into contract customers. Manage contract renewals, amendments, and service agreements. Coordinate with maintenance teams to ensure timely and efficient service delivery. Follow up on customer satisfaction and resolve inquiries or complaints professionally. Identify opportunities to increase contract sales, renewals, and customer retention. Re-engage inactive or lost customers through targeted follow-ups. Prepare regular reports on sales, contracts, renewals, and customer feedback. Monitor market trends and customer needs to identify new business opportunities.<br>Job Requirements Education: Bachelor's degree in Business Administration, Marketing, or a related field. Experience: Minimum of 1 to 3 years of experience in aftersales, customer service, or contract management roles. Knowledge: Strong understanding of customer relationship management, maintenance services, and contract administration. Technical Skills: Proficient in Microsoft Office (Excel, Word, Outlook) and CRM or contract management software. Languages: Very good command of English (written and spoken); additional languages are a plus.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b>Shape &amp; Create - And make it happen!</b></span><span>The Villeroy &amp; Boch Group with its Ideal Standard brand is one of the world's leading manufacturers in the ceramics and lifestyle sector. With our innovative and stylish products from the Dining &amp; Lifestyle and Bath &amp; Wellness segments, we have been creating moments and rooms to feel good in since 1748. Our success is based on the passion, design expertise and innovative strength of our more than 13,000 employees in 42 countries. </span><span>Want to become part of us? #shapeandcreate</span><ul><li>Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial or domestic purposes.</li><li>Operating a variety of standard power tools, electric meters and material handling equipment in performing duties.</li><li>Ensuring that work is in accordance with relevant codes.</li><li>Evaluating electrical systems, products, components, and applications by designing and conducting research programs.</li><li>Performing a wide variety of electrical maintenance tasks to service, inspect, troubleshoot, repair, install and maintain electrical equipment and machinery.</li><li>Conducting preventive maintenance programs and keeping maintenance records.</li><li>Providing training and guidance to junior and apprentice electricians as needed.</li><li>Reading blueprints or technical diagrams before doing work.</li><li>Estimating material, labor, or construction costs for budget preparation.</li><li>Keeping abreast of advances in technology and job knowledge by participating in educational opportunities and reading professional publications.</li></ul><span><b>Think outside the box with us! #shapeandcreate</b></span> </div>

Main Purpose Of The Job Ensure the reliability and efficiency of electrical systems within an organisation, minimising downtime and maximising productivity.<br>Key Responsibilities Plan and perform scheduled maintenance on electrical systems and equipment to ensure optimal performance and reduce downtime. Diagnose and resolve electrical faults and malfunctions in machinery and systems, using technical skills and tools. Assist in the installation of new electrical equipment and systems, ensuring they are set up according to specifications and safety standards. Ensure all maintenance activities adhere to safety regulations and industry standards, promoting a safe working environment. Maintain accurate records of maintenance activities, repairs, and inspections, providing documentation for compliance and auditing purposes. Regularly monitor the performance of electrical systems, analysing data to identify potential issues and areas for improvement. Work closely with other engineering and maintenance teams to coordinate activities and share knowledge. Provide guidance and training to junior staff and operators on proper equipment use and maintenance practices.<br>Job Requirement:Qualification: Bachelor's degree in electrical engineering. Related Field Experience: +5 years of experience in the same industry is preferable.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><u><b>Accenture Technology:</b></u><br>Through unmatched industry experience, leading technologies from our ecosystem partners and startups, and the largest delivery network in the world, we provide a powerful range of capabilities that can be tailored to our client’s most complex business needs. With over 100 innovation hubs deployed around the world, we help clients continuously innovate at speed and at scale so they can outpace their peers. You will bring innovation, intelligence, and industry experience together with the newest technologies to help clients innovate at scale and transform their businesses. Visit us at&nbsp;www.accenture.com<br>&nbsp;</p><br><br><p><b>Job Summary</b></p><br><br><p>Accenture is seeking an experienced <b>SAP Plant Maintenance (PM) / Enterprise Asset Management (EAM) Manager</b> to lead the design, implementation, and delivery of asset management and maintenance solutions across enterprise clients. The successful candidate will bring deep functional expertise in SAP PM/EAM, strong leadership capabilities, and a proven track record of managing end-to-end SAP maintenance transformation initiatives.</p><br><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Lead end-to-end delivery of SAP PM/EAM implementations, including requirements gathering, solution design, configuration, testing, and deployment.</li><li>Serve as the functional lead for maintenance and asset management processes (preventive, corrective, breakdown, and predictive maintenance).</li><li>Configure and optimize core PM/EAM areas: technical objects (functional locations, equipment), maintenance planning, work order management, notifications, and maintenance execution.</li><li>Drive integration with related SAP modules (MM, PP, PS, FI/CO) and asset-intensive business processes.</li><li>Advise clients on asset management best practices, process improvements, and SAP S/4HANA Asset Management (EAM) adoption.</li><li>Provide technical and functional leadership, mentorship, and quality oversight to delivery teams.</li><li>Collaborate with business stakeholders, architects, and cross-functional teams to translate requirements into robust solutions.</li><li>Manage project scope, timelines, risks, and stakeholder expectations throughout the delivery lifecycle.</li></ul><br> </div>

O&M Engineer (Wind Turbines) Location: Ra’s Gharib, Ras Gharib Company: Goldwind Work Arrangement: Site-Based (Rotation Schedule) Position Overview The O&M Engineer is responsible for performing operation and maintenance (O&M) activities for wind turbine generators (WTGs) in accordance with project schedules, company standards, and HSE requirements. This role includes preventive and corrective maintenance, troubleshooting, inspections, retrofits, reporting, and customer coordination to ensure the safe and reliable operation of wind farms. Key Responsibilities Operations & Maintenance Perform preventive and corrective maintenance on wind turbine generators (WTGs) in line with company procedures and project schedules. Diagnose and troubleshoot electrical, mechanical, hydraulic, and software-related faults. Replace defective components and complete defect-elimination tasks to restore turbine availability. Conduct scheduled inspections, retrofits, and technical upgrades. Analyze turbine operational data to identify trends and support performance optimization. Execute pre-Commercial Operation Date (pre-COD) activities, including completion checklist reviews and documentation verification. Carry out post-COD inspections and unscheduled maintenance activities. Site Supervision & Coordination Monitor and inspect installation contractors to ensure compliance with technical and quality standards. Coordinate with customers regarding completed services, planned maintenance, and technical issues. Prepare and submit accurate maintenance reports and service documentation. Inventory & Administration Manage spare parts, tools, and consumables inventory. Raise material requisitions and ensure timely availability of critical components. Maintain proper records of maintenance activities, inspections, and technical reports. Health, Safety & Environment (HSE) Strictly comply with company and site HSE policies and procedures. Identify, report, and mitigate workplace hazards. Report incidents and near misses accurately and promptly. Participate in HSE meetings, audits, and safety initiatives. Other Duties Support additional tasks and projects assigned by management. Qualifications & Experience Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related discipline.1–3 years of experience in wind turbine operation and maintenance or in a similar industrial environment. Strong knowledge of electrical, mechanical, hydraulic, and control systems. Ability to read and interpret technical drawings, schematics, and manuals. Experience with SCADA systems and data analysis is preferred. Good command of English (written and spoken) MUST Valid driving license and willingness to travel and work in remote site locations. Ability to work at heights and in demanding weather conditions. Preferred Certifications GWO (Global Wind Organisation) certifications are highly preferred Key Competencies Problem-solving and analytical thinking Strong communication and teamwork Customer-oriented mindset Ability to work independently under pressure Commitment to safety and quality

Position Summary :<br><br>The Electrical Maintenance Engineer Ensures maximum operational uptime and reliability of plant electrical equipment, automation systems (PLCs, HMIs, VFDs), and power distribution infrastructure. Leads electrical troubleshooting, automation programming/modifications, and preventive electrical maintenance to support uninterrupted seasonal production.<br><br>Job Description :<br><br> Program, troubleshoot, backup, and optimize PLC logic (Siemens, Allen-Bradley, Schneider) and HMI interfaces Diagnose faults in VFDs, servo drives, field sensors, control loops, and industrial communications (Profinet, Modbus) Calibrate and maintain specialized line automation components, including scales , X-ray inspection systems, metal detectors, and checkweighers Carry out scheduled preventive electrical maintenance tasks on production and packaging lines to reduce unplanned downtime Respond to electrical breakdowns promptly, performing root cause analysis (RCA) and executing necessary repairs on control circuits and power lines Document all electrical interventions, parameter adjustments, and fault logs accurately in the CMMS Ensure high-speed production lines, packaging machinery, and key processing systems are fully operational during high-demand months<br><br>Prioritize electrical troubleshooting based on production schedules and line urgency.<br><br> Coordinate closely with production and quality teams for planned electrical modifications and power shutdowns Monitor and maintain high-to-low voltage distribution networks, main distribution panels (MDBs), motor control centers (MCCs), transformers, and UPS systems Oversee electrical systems for utilities, including air compressors, cooling units, chillers, AHUs, pumps, and emergency generators Ensure all electrical utility equipment operates within safe operating limits, proper load balancing, and high-power factor efficiency Strictly apply Lock-Out/Tag-Out (LOTO), arc-flash protocols, PPE requirements, and electrical safety standards during maintenance work Maintain food-grade electrical standards, including IP-rated enclosures, proper cable trunking, hygienic panel sealing, and clean sensor installations Report and escalate electrical safety hazards or unsafe wiring conditions promptly Monitor critical electrical and automation spare parts consumption (PLCs, VFDs, servo motors, fuses, relays, sensors) and raise replenishment requests Contribute to cost control by optimizing spare usage, identifying reliable alternative components, and maintaining software licenses Identify recurring electrical or automation faults and engineer permanent solutions to boost reliability Participate in root cause analysis, engineering modifications, and control panel rewiring projects<br><br>Requirements<br><br>Bachelor's degree in Electrical Engineering, Automation/Control Engineering, or Mechatronics Engineering Additional certificates in maintenance systems (e.g., TPM, CMMS, PLC basics) are considered a plus3-5 years of hands-on industrial electrical and automation experience in food processing, FMCG, or automated sorting facilities. Demonstrable experience troubleshooting PLCs, VFDs, sensors, and power panels Proven experience with maintenance of conveyors, Production lines, X-ray, AHUs, Cooling units, sorters, metal detectors, mixers, chocolate production line , baking systems, and packaging lines. Working knowledge of utilities such as compressors, chillers, pumps, and electrical distribution systems. Familiarity with food safety requirements (e.g., hygiene design, equipment sanitation) in maintenance work is a must Experience using Computerized Maintenance Management System (CMMS) and basic troubleshooting tools. <br><br>Benefits<br><br>Medical insurance Social insurance Annual Bonus Based on KPIsDiscount on Linah Farms's Products

Job Purpose<br><br>Ensures that the preventive and corrective maintenance is conducted frequently for smooth operation.<br><br>Duties And Responsibilities<br><br>Manages fire and rescue drills in collaboration with the safety manager. Maintains product quality and ensures that the process is running according to standards. Supports operators in developing their soft and technical skills. Oversees deviations and coordinates with stakeholders to take corrective actions accordingly. Prepares presentations and shares them with the manager on a monthly basis. Trains operators on preventive maintenance, monitoring equipment and critical line problems to resolve issues efficiently. Writes and updates Standards Operating Procedures. Improves the quality of work orders. Audits operators’ work while performing preventive maintenance. Analyzes breakdowns according to 5 whys and recommends corrective actions accordingly. Ensures that Heineken standards are applied in the plants. Aligns with subcontractors and the production management team on available equipment for preventive maintenance.<br><br>Disclaimer: Other duties assigned as needed.<br><br>Education & Experiences <br><br>Educational Background<br><br>Bachelor’s degree in Science or Chemical or Production Engineering<br><br>Years Of Experience<br><br>2 - 4 years of experience in production process in FMCG companies<br><br>Qualifications & Other Requirements<br><br>Excellent command of English Language<br><br>Skills in Microsoft (Excel & Power Point)<br><br>TPM Knowledge<br><br>HACCP/ISO Principles and systems<br><br>Functional Competencies<br><br>Safety<br><br>Act in a way that contributes to maintaining a safe environment for employees, contractors and visitors in line with the applicable statutory, HEINEKEN, and local regulations and policies.<br><br>Environment & Sustainability<br><br>Operate with good environmental conditions and improve environmental aspects of the operation.<br><br>Quality management & Control<br><br>Sustain and improve product quality and process conditions throughout the brewing and cider production process and to execute quality tasks autonomously, in compliance with global and local quality and food safety standards.<br><br>Equipment operation & Control<br><br>Safely operate Brewing & Cider equipment, and make improvements and innovations, through the seamless integration of TPM methodology in autonomous operations.<br><br>Equipment Maintenance<br><br>Carry out and optimize corrective and preventive maintenance tasks<br><br>In a safe and hygienic manner and safeguard equipment availability.<br><br>Personal Skills<br><br>Target and Detail Oriented Analytical Skills Interpersonal & Communication Skills Coaching & Delegation Skills High learning agility High problem-solving capabilities Critical and Challenging#addjob

Perform preventive and corrective maintenance for workshop tools and equipment.<br> Diagnose and troubleshoot mechanical, electrical, and pneumatic equipment faults.<br> Conduct regular inspections to ensure the proper operation and safety of tools and equipment.<br> Follow preventive maintenance schedules and minimize equipment downtime.<br> Coordinate with the maintenance team to ensure equipment availability and reliability.<br> Maintain accurate maintenance records and reports.<br> Support the installation, calibration, and commissioning of workshop equipment.<br> Ensure compliance with safety standards and maintenance procedures.<br> <br><br><br>Requirements<br><br>Bachelor’s degree in Mechanical or Electrical Engineering.<br> 2+ years of experience in tools and equipment maintenance.<br> Experience in automotive workshop tools and equipment is highly preferred.<br> Good knowledge of mechanical, electrical, and pneumatic systems.<br> Strong troubleshooting and problem-solving skills.<br> Good technical and analytical skills.<br> Good command of English.<br> Good communication and teamwork skills.<br> Ability to work under pressure and meet deadlines.<br> Proficiency in MS Office.<br> <br><br><br>Benefits<br><br>Why Join SMG?<br><br>Legacy, Leadership & Vision<br><br><br> Join a pioneering organization with over five decades of excellence in Egypt’s automotive sector. SMG is the sole importer of Porsche, Scania, and Harley-Davidson, a trusted partner to the main Aftermarket Spare Parts Wholesale and Retail, and the most reliable and business partners of automotive garage tools and equipment.<br> Be part of a forward-thinking company with a diversified investment portfolio and a strong vision for sustainable mobility, innovation, and market leadership.<br> <br>Meaningful & Impactful Work<br><br><br> Contribute to a company that isn’t just selling cars, but shaping the future of road safety, customer experience, and automotive service standards in Egypt.<br> From premium vehicle brands to aftermarket solutions and industrial tools, your work will have an impact across multiple industries and thousands of customers.<br> <br>Growth & Development<br><br><br> SMG empowers its employees with a culture of continuous learning, internal mobility, and career progression. With full support for both internal and external training, you’ll gain access to tools and knowledge that help you thrive as a leader.<br> Whether you’re optimizing operations or leading financial strategy, your contribution will drive real results. People-First Culture<br> Work in an inclusive, collaborative environment that values expertise, transparency, and trust. At SMG, we encourage open communication across all levels—including 24/7 access to HR support—because we believe that progress begins with honest conversation.<br> <br>Competitive Rewards & Benefits<br><br><br>Enjoy a comprehensive compensation package designed to support you and your family, including:<br> Medical, social, and life insurance<br> Pension plan<br> Annual salary review and profit-sharing program<br> Exclusive discounts on service, spare parts, and branded items<br> Fully paid training program<br><br>Skills: Clear understanding of management accounts. <br> Effective negotiation and influencing skills. <br> Effective time management skills and ability to meet strict deadlines <br> Ability to organise own workload and that of the team <br> Ability to identify opportunities for business development within the region. <br> People management skills. <br> Ability to take initiative and work under pressure <br> Excellent customer service skills and ability to build and manage key relationships <br> Awareness and understanding of health and safety requirements. <br> General computer skills <br> Fluent in English

???? We’re Hiring | Utilities and Fortklift Maintenance Engineer<br>We are looking for a Maintenance Engineer to join our team.<br>Requirements:✔ Bachelor’s degree in Mechanical or Electrical Engineering✔ Minimum 2 years of experience in Maintenance✔ Experience in Utilities is a plus<br>Benefits:✅ Social & Medical Insurance✅ Accommodation Provided✅ Transportation Provided<br>???? Location: New Salhia, Sharqia???? Working Hours: 8:00 AM – 4:00 PM???? Day Off: One Rotational Day Off per Week<br>Interested candidates can send their CVs via 01001445008 <br>Qualifications Experience in maintenance of forklifts and material handling equipment, including mechanical, electrical, and hydraulic systems. Knowledge of industrial utilities (such as compressed air systems, water supply, power distribution, and HVAC) and related maintenance practices. Ability to read and interpret technical manuals, maintenance schedules, and equipment diagrams; basic diagnostic and troubleshooting skills. Understanding and application of workplace safety standards, risk assessment, and safe maintenance procedures. Relevant technical diploma or engineering degree (Mechanical, Electrical, Mechatronics, or related field). Previous experience in industrial or warehouse environments is preferred. Strong organizational skills, attention to detail, and ability to work both independently and within a team. Willingness to work on-site in Markaz Fakous and support occasional extended

Job Purpose:To lead, direct, and oversee the maintenance and operations team in managing all on-site electrical systems and equipment. The role ensures uninterrupted power supply, maximizes operational efficiency, minimizes downtime, enforces strict safety and quality standards, and optimizes operational costs.<br>Key Responsibilities:Lead, mentor, and direct engineers and technical teams; assign daily responsibilities, evaluate performance, and enhance productivity. Strategy, design, and execute Preventive and Predictive Maintenance (PPM) programs to minimize breakdowns and extend asset lifecycles. Lead Root Cause Analysis (RCA) for complex electrical failures and direct rapid-response troubleshooting to minimize operational downtime. Oversee the inspection, testing, and operation of Low/Medium Voltage systems, transformers, generators, Main Distribution Boards (MDBs/SMDBs), and Uninterruptible Power Supply (UPS) systems. Manage contractors and vendors, ensuring deliverable quality aligns with technical specifications, site requirements, and approved codes. Review and approve spare part requests, manage critical inventory levels, and prevent delays in maintenance activities. Analyze energy consumption data and implement engineering solutions to optimize power usage and reduce operational expenses. Oversee the functionality and integration of Low Current systems (CCTV, Fire Alarm, Access Control, Intercom, etc.). Enforce occupational health and safety (HSE) standards and ensure compliance with local and international electrical codes. Develop emergency recovery plans for continuous power supply and present periodic technical and KPI performance reports to senior management.<br>Qualifications & Key Requirements:Education: Bachelor’s Degree in Electrical Engineering from an accredited university. Experience: Minimum of 7 years in electrical operation and maintenance within large facilities or industrial sites, including a minimum of 2 years in a leadership or supervisory capacity. Proficiency in Auto CAD, load calculation, and electrical simulation software. Deep understanding of electrical codes and standards (e.g., IEC, NEC, SBC) and Building Management Systems (BMS). Strong technical knowledge of LV/MV networks, power distribution, and protection systems. Proven leadership, team management, and problem-solving skills under pressure. Excellent communication, vendor management, and reporting abilities in English (Arabic is a plus).

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br> <p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>We are seeking a&nbsp;</span><em>Civil Lead Engineer</em><span>&nbsp;to lead and coordinate the review of shop drawings for civil works on complex construction or infrastructure projects. This role sits at the interface between design, construction, and project management, ensuring that contractor-submitted drawings comply with project specifications, design intent, applicable codes, and site constraints. The position is critical to maintaining technical quality, constructability, and timely approval workflows throughout project execution.</span></p><br><br> Missions/Main Duties <br><p>The Civil Lead Engineer is responsible for managing and executing the technical review process for shop drawings related to civil works, including structural interfaces, grading, drainage, roads, utilities, foundations, and associated infrastructure elements. The role ensures that submitted documents are accurate, coordinated, and aligned with contract requirements.</p><br><br><p>Key responsibilities typically include:</p><br><br><ul><li>Lead the review and approval process of civil shop drawings submitted by contractors and subcontractors.</li><li>Verify compliance of drawings with IFC documents, design criteria, project specifications, standards, and local regulations.</li><li>Identify discrepancies, clashes, omissions, and constructability issues in submitted documents.</li><li>Coordinate with multidisciplinary teams including structural, architectural, MEP, geotechnical, and construction teams to resolve technical comments.</li><li>Issue review comments, track revisions, and ensure timely closure of technical queries.</li><li>Support the engineering manager or project manager in maintaining drawing review schedules and approval turnaround times.</li><li>Ensure that approved shop drawings reflect site conditions, method statements, and construction sequencing requirements.</li><li>Participate in technical meetings with contractors, consultants, and internal stakeholders to clarify design and review comments.</li><li>Monitor document control processes related to submittals, revisions, and approvals.</li><li>Provide technical guidance to junior engineers and reviewers involved in civil document assessment.</li><li>Contribute to risk identification related to design coordination, execution constraints, and quality compliance.</li><li>Support site teams during construction by clarifying approved details and resolving engineering issues when needed.</li></ul> Profile/Skills <br><p>The ideal candidate is a technically strong and detail-oriented civil engineering professional with proven experience in design review and construction documentation.</p><br><br><p>Typical requirements include:</p><br><br><ul><li>Bachelor’s degree in<em>Civil Engineering</em>or related discipline.</li><li>Solid experience in civil engineering, with significant exposure to<em>shop drawing review</em>on building, industrial, or infrastructure projects.</li><li>Strong knowledge of civil design principles, construction methods, and technical specifications.</li><li>Ability to review drawings for roads, drainage, utilities, earthworks, concrete works, and external works.</li><li>Familiarity with international and local codes, standards, and QA/QC requirements.</li><li>Proficiency in reading and interpreting engineering drawings, calculations, and material submittals.</li><li>Experience coordinating with multidisciplinary engineering teams and contractors.</li><li>Good understanding of document control and submittal workflows.</li><li>Proficiency in tools such as AutoCAD, Civil 3D, Bluebeam, BIM platforms, or other drawing review software is often preferred.</li><li>Strong analytical skills and attention to detail.</li><li>Good communication and technical reporting abilities.</li><li>Ability to manage priorities, meet deadlines, and work in a fast-paced project environment.</li><li>Leadership capability, with experience guiding review teams or interfacing directly with clients and contractors.</li><li>Professional certification or membership in an engineering body is a plus.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>On-site</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

Job Summary: The guardian of the technical fleet, ensuring maximum "uptime for specialized piling rigs (Bauer, Casagrande, etc.). Key Responsibilities:Preventive Maintenance (PM): Designing and enforcing strict maintenance schedules for hydraulic piling rigs, cranes, and decanting plants to prevent costly mid-project breakdowns. Breakdown Recovery: Leading rapid-response teams to troubleshoot and repair mechanical, hydraulic, or electrical failures on-site. Workshop Management: Overseeing the central and mobile workshops in Libya, including the management of specialized tools and diagnostic equipment. Spare Parts Logistics: Managing the inventory of critical "wear parts" (teeth, augers, hydraulic hoses, filters) and coordinating international procurement from Egypt or Europe. Asset Lifecycle: Monitoring engine hours and performance data to advise on major overhauls or when a machine needs to be retired/replaced. Typical Requirements:Experience: 10–15+ years in heavy equipment maintenance, with at least 5 years specifically focused on foundation/piling machinery. Education: Bachelor’s degree in Mechanical Engineering. Technical Expertise: Deep knowledge of heavy hydraulics, diesel engines (CAT, Cummins, Perkins), and electronic control systems used in modern piling rigs.

Job Description<br><br>You will lead the maintenance and repair of plant equipment and facilities aligned with standard GM maintenance systems, and conduct appropriate checks and tests and communicates evaluation of results in addition to the following responsibilities:<br><br>About GM<br><br>Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.<br><br>Why Join Us <br><br>We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.<br><br>Non-Discrimination and Equal Employment Opportunities<br><br>General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.<br><br>We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire.<br><br>Accommodations<br><br>General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly experienced, proactive, and detail-oriented Facilities &amp; Maintenance Manager with Maintenance Background to oversee the daily operations and maintenance of our Factory at Borg Al Arab. The ideal candidate will be responsible for ensuring a safe, efficient, and well-maintained environment for all occupants and assets, playing a critical role in supporting our business operations and employee well-being. Key Responsibilities: 1) Operations &amp; Maintenance Management 2)Vendor &amp; Contractor Management 3) Budgeting &amp; Cost Control 4) Health, Safety &amp; Compliance 5)Utilities &amp; Resource Management 6)Stakeholder Communication 7) Asset Management</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications and Requirements:</b></p><ul><li>Bachelor's degree in Engineering (Mechanical, Electrical, Civil)</li><li>Minimum of 10-15 years of progressive experience at domain facility management, operations, or property management, preferably in a [Textile industry, e.g., corporate, manufacturing, industrial] environment.</li><li>Strong knowledge of building systems (HVAC, electrical, plumbing, fire safety) and maintenance best practices.</li><li>Demonstrated experience in vendor management, contract negotiation, and budget management.</li><li>In-depth understanding of Egyptian health, safety, and building regulations.</li><li>Excellent leadership, communication (written and verbal in Arabic and English), and interpersonal skills.</li><li>Strong problem-solving abilities and a proactive approach to facility issues.</li></ul><p></p></section>

Connect to your career at Deloitte<br><br>Deloitte, established globally in 1845, is the world’s largest and leading professional services firm, providing Audit & Assurance, Tax & Legal and Consulting and related services to public and private clients spanning multiple industries. Present in more than 150 countries, Deloitte is distinct in its ability to help clients solve their most complex problems, from strategy to implementation.<br><br>Deloitte Innovation Hub (DIH) is a strategic initiative/priority to support our ambition to become the leading business transformation partner of choice for our clients and to expand and scale our delivery footprint across EMEA. With access to a scaled, diverse, highly skilled, motivated, and engaged workforce, DIH is delivering complex technical solutions for clients’ most complex business problems, across Portfolios that include ‘Strategy & Transactions’, ‘Customer’, ‘Engineering, AI & Data, ‘Enterprise, Technology & Performance’ and ‘Cyber’. DIH is aiming to become the destination for top talents in Egypt for a long, exciting career.<br><br>We invest in outstanding people of diverse talents and backgrounds and empower them to achieve more than they could elsewhere. Our work combines advice with action and integrity. We believe that when our clients and society are stronger, so are we. Our organization has grown in scale and diversity, providing services across the region, with our shared culture remaining the same. We aim to help clients realize their ambitions, make a positive difference in society, and maximize the success of our people. This drive fuels the commitment and humanity that run deep through our every action.<br><br>Connect to your opportunity.<br><br>Key Responsibilities<br><br>At our company, we're dedicated to providing innovative solutions to our clients in the field of SAP implementations. Our team collaborates on a range of projects, addressing the unique challenges faced by our clients in the realm of sales and distribution. We leverage our deep industry expertise, consulting prowess, and analytical skills to drive transformative change. The projects we undertake are diverse, and your role within the team will be tailored to your level of experience and your specific skill set.<br><br>Your responsibilities are likely to encompass various aspects, with a strong emphasis on exceeding client expectations and aligning with our commitment to continuous improvement. In this role, you'll be adept at converting complex client challenges into effective technical solutions, ultimately enhancing our client's sales and distribution processes.<br><br>Travel Expectations<br><br>You will be required to travel internationally up to 30% to 50% of the time, outside of Egypt.<br><br>Connect To Your Skills And Professional Experience<br><br>As an SAP Plant Maintenance Consultant, you will be responsible for contributing to the delivery of projects and programs from initial shaping through to completion. You will work collaboratively with project teams and independently, ensuring high performance and successful outcomes. To be considered for the role, candidates should meet the following criteria:<br><br>7+ years minimum years of experience with end-to-end SAP implementations in the same field. High Proficiency in configuration of SAP Plant Maintenance, including Equipment, Functional locations, Maintenance Notifications, maintenance orders, Task Lists, Maintenance Orders, Maintenance Plans, Work Centers, and Preventive & Corrective Maintenance Processes. Hands-on Experience with Enterprise Asset Management, Breakdown Maintenance, Preventive Maintenance, Refurbishment, Calibration, and Maintenance Planning scheduling. Strong Integration experience with SAP MM, PP, QM, FI/CO and Asset Accounting (AA). Experience with SAP S/4 HANA Asset Management and Fiori application for maintenance processes is highly preferred. Ability to lead, design & deliver on agreed timelines. Ability to lead SAP business workshops, fit-gap analysis, plan & design all needed activities for successful delivery. Great understanding and knowledge of new scope items as per SAP best practices for SAP Plant Maintenance. Strong collaboration and stakeholder engagement skills Self-motivated and organized person High level of attention to detail, the ability to think architecturally at ‘big picture’ and able to translate this into practical implementation. Excellent ability to execute where information is ambiguous, utilizing professionalism, experience and prior knowledge. Excellent leadership and problem-solving skills. Strong interpersonal skills: role will require engagement with a varied and senior stakeholder base Documentation skills to provide high quality documentation for internal customers and technical teams. Openness to learning and managing new technologies as business requirements change.<br><br>Desirable<br><br>Good to have: SAP Certified Associate – SAP S/4 HANA Asset Management (Plant Maintenance) Required strong technical skills and demonstrated experience in each of the following areas:Excellent communication (written and oral) and interpersonal skills Deliver right solution architecture, automation and technology choices starting from experimentation and proof of concept phases of new analytical models Demonstrated teamwork and collaboration in a professional setting Preferred Industry Experience is Public Sector Arabic is a must + English fluency<br>Connect to your service line – Technology and Transformation<br><br>Distinctive thinking, deep expertise, and collaborative working. That’s what connects us. That’s what makes us Deloitte. If you want to help solve some of the biggest challenges around, join us. Together, we’ll make an impact that matters.<br><br>Personal independence<br><br>Regulation and controls are standard practice in our industry and Deloitte is no exception. These controls provide important legal protection for both you and the firm. We are subject to several audit regulations, one of which requires that certain colleagues abide by specific personal independence constraints. This can mean that you and your "Immediate Family Members" are not permitted to hold certain financial interests (shares, funds, bonds etc.) with audit clients of the firm. The recruitment team will provide further detail as you progress through the recruitment process.<br><br>Connect to your Industry<br><br>“What attracted me to Deloitte were the endless opportunities and the collective experience of other like-minded individuals. Deloitte’s clients include many of the world’s largest organizations; I wanted to be part of a team that made a difference that I could be proud of.” Dan, T&T.<br><br>Connect with your colleagues<br><br>Location: Cairo. Egypt<br><br>Your Work, Your Way: We call our hybrid working vision Deloitte Works. And it does. We trust you to make the right choices around where, when, and how you work. You’ll be able to make decisions about how you work best, to be collaborative, learn from colleagues, share your experiences, build the relationships that will fuel your career and prioritize your wellbeing. Having great conversations with your team and your leadership paves the way for great collaborative ways of working.<br><br>Our commitment to you<br><br>Making an impact is more than just what we do: it’s why we’re here. So we work hard to create an environment where you can experience a purpose you believe in, the freedom to be you, and the capacity to go further than ever before.<br><br>We want you. The true you. Your own strengths, perspective, and personality. So, we’re nurturing a culture where everyone belongs, feels supported and heard, and is empowered to make a valuable, personal contribution. You can be sure we’ll take your wellbeing seriously, too. Because it’s only when you’re comfortable and at your best that you can make the kind of impact you, and we, live for.<br><br>Your expertise is our capability, so we’ll make sure it never stops growing. Whether it’s from the complex work you do, or the people you collaborate with, you’ll learn every day. Through world-class development, you’ll gain invaluable technical and personal skills. Whatever your level, you’ll learn how to lead.<br><br>Connect to your next step<br><br>A career at Deloitte is an opportunity to develop in any direction you choose. Join us and you’ll experience a purpose you can believe in and an impact you can see. You’ll be free to bring your true self to work every day. And you’ll never stop growing, whatever your level.

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants, and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action contributes to creating a positive and memorable impact for our customers, our colleagues, and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p>Supervise maintenance and production of all items that need painting and furniture in the facility.<br> Keep the technical services workshop up and running.<br> Care for and repair all items needing painting in the facility.<br> Perform tasks assigned by his or her manager that are related to the department and position.<br> Take part in any work that requires the full participation of the Technical Service Department.<br> Supervise scraping, sanding, priming, or sealing surfaces prior to painting in the facility.<br> Repair any problems with keys and locks.<br> Work on a shift basis and start the shift on time.<br> Keep the workspace clean and ensure that it is cleaned after the work is complete.<br> Must always maintain a clean and proper appearance and wear a uniform.<br> Carry out other reasonable tasks that may be requested.<br> Work according to the policies, procedures, and instructions identified by the Chief Engineer.</p> <p>Take part in the Emergency Response Team.<br> Carry out all responsibilities related to the quality management systems implemented at the facilities.<br> Carry out all other duties assigned by managers and hotel management not specified in the job description.<br> Must take all measures required for occupational and worker health and comply with all measures taken.</p> <h4>Qualifications</h4> <ul> <li>Education: At least a primary school or equivalent diploma.</li> <li>Experience: At least 3 years of practical experience required by the job.</li> <li>Foreign language: Not required.</li> <li>Courses and training: Not required.</li> <li>Computer literacy: Not required.</li> <li>Skills: Expected to use basic tools and equipment related to the job. If necessary, expected to possess certification in the related field.</li> </ul> <h4>Additional information</h4> <p><strong>Your team and working environment:</strong><br> In 1-2 sentences, introduce the team, property, or office environment in a way that reflects the culture.</p> <p><strong>Note:</strong> Customization may be included for any specific local or legislative requirements, such as work permits.</p> <p><strong>Our commitment to diversity & inclusion:</strong><br> We are an inclusive company and our ambition is to attract, recruit, and promote diverse talent.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To process the daily operations requested by the concession committee, and perform cross checking of payments of incoming Cheques to maintain customer satisfaction and mitigate any potential risk.</p><p>Pricing Maintenance &amp; Cross Checking</p><p>1. Setup the waive of the Cheques collection fees in accordance to the concession committee to maintain customer satisfaction.</p><p>2. Trace the concession memos that are close to the expiry date to obtain renewal or deletion on the system to ensure alignment between the system setup and approved concessions.</p><p>3. Perform the proofs and ensure that all physical incoming Cheques, incoming trade bills, and funds transactions are matching with processed records in the system to report any missed transactions and mitigate any potential risk.</p><p>4. Escalate any invalid payments to mitigate any operational risk.</p><p>5. Report any system errors and follow-up with the IT and vendors to ensure that transactions are carried out accurately.</p><p>6. Preserve accurately the checked cheques and trade bills based on the processing dates for efficient and secure custodian.</p><p>7. File and copy all paid Cheques and trade bills in case it was needed for any legal proceedings.</p><p>Policies, Processes and Procedures</p><p>8. Follow all relevant department policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</p><p>Day-to-day Operations</p><p>9. Follow the day-to-day operations related to own jobs in the department to ensure continuity of work.</p><p>Compliance</p><p>10. Comply with all relevant CBE regulations, banking laws, AML regulations and internal CIB policies and code of conduct in order to maintain CIB s sound legal position and mitigate any potential risks.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree of Commerce, Business Administration, Accounting, Economics, or its equivalent</p><p>Minimum 2 - 4 years of relevant banking operations experience</p><p>Good knowledge of accounting principles</p><p>Skills</p><p>Good command of English and Arabic languages</p><p>Proficient user of MS Office</p><p>Detail oriented</p><p></p></section>

Overview<br><br>We Are Pepsi Co<br><br>Pepsi Co is a leading name in North Africa’s food and beverage industry, where our products are enjoyed by consumers daily across the region. We offer a robust portfolio of beloved brands like PEPSI, SEVEN-UP, DORITOS, CHEETOS and CHIPSY, designed to cater to the tastes and preferences of consumers. With a focus on local sourcing, production, and distribution, Pepsi Co provides essential support to local economies and partners closely with communities throughout the region.<br><br>Guiding Vision and Regional Impact<br><br>Pepsi Co’s vision aligns with our global goal to be the Leader in Beverages and Convenient Foods by Winning with Pepsi Co Positive (pep+). This strategic transformation is committed to sustainable growth by putting people and the planet at the heart of our operations. In North Africa, this includes initiatives in responsible sourcing, waste reduction, and water conservation. Our regional programs empower local talent, boost employment, and provide support for local agriculture, particularly through partnerships with farmers and suppliers.<br><br>Empowering Our People and Communities<br><br>Our dynamic teams drive the Pepsi Co culture in North Africa, embracing diversity and collaboration to solve local challenges and create innovative products. We are dedicated to fostering an inclusive workplace, one where every individual feels valued and empowered to be themselves. This commitment extends beyond our employees to positively impact the communities we serve, striving for shared growth and a healthier, more sustainable future for all.<br><br>Diversity and Inclusion Commitment<br><br>Pepsi Co stands firmly behind our global commitment to diversity, equality, and human rights. We are proud to be an equal opportunity employer, ensuring a fair and welcoming workplace for all, regardless of age, gender, religion, disability, or any other characteristic. Our dedication to inclusion strengthens our workforce and helps drive our business forward, enriching both Pepsi Co and the communities in North Africa.<br><br>overseeing the daily operations and maintenance of utility systems, ensuring their efficient and reliable function<br><br>Responsibilities<br><br>Manage plant utilities infra-structure and ensuring efficient operation Plan and oversee all intervention and overhauls through all utilities equipment. Ensure reliable operation for Steam boilers and steam distribution networks to supply the required steam demand Monitor HVAC mechanical systems (AHUs, ventilation) and ensure equipment’s reliability Monitor and Maintain operation of chillers, LPC, RO and WWTPEnsure WWTP adheres environmental and Governate compliance Responsible for enhancing continuous improvement culture in his team and using Total Productivity Maintenance (TPM) tools such as “KAIZEN” and “OPL” to achieve long term goals. Owns plant Energy Management & Optimization Monitor utilities equipment’s consumptions(water, Natural gas and electricity) Ensure Continuous and Compliant Wastewater Treatment Operation and daily RO unit operation Lead achieving results of internal audits (TPM PM, M&W,PEMM) and External audits (AIB, ,GEHSMS) Responsible for applying Pepsi Co Environmental Health & Safety (EH&S) standards in all Mechanical Utilities activities done by his team to achieve zero safety incidents. Responsible for enhancing continuous improvement culture in his team and using Total Productivity Maintenance (TPM) tools such as “KAIZEN” and “OPL” to achieve long term goals. Responsible for doing required Root Cause Analysis (RCA) for Utilities breakdown to ensure proper corrective and preventive actions to avoid repetition. Responsible for applying AIB standards in utilities boundaries and to complete the food safety non-conformities action plan Responsible for updating skill Matrix for utilities team and arrange a proper training plan filling the gap.<br><br>Qualifications<br><br>Mechanical Engineering bachelor’s degree (Power, Mechatronics or Industrial Engineering majors) Minimum of 3-5 years of relevant experience in the same field. Strong in English - written and spoken. Computer & Microsoft Office programs proficiency (Excel-Word-Power Point SAP is extra) Communication & Leadership Skills. Decision Maker & Results-oriented.