Heavy equipment mechanical engineer Jobs

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring good technical condition. Responsibilities: 1- Monitor the technical condition of production line equipment and adhere to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Conduct preventive maintenance for production lines according to the maintenance schedule throughout the year 4- Review warehouse stock of spare parts (maximum, minimum, and reorder point) and inform the direct supervisor if the spare parts used in maintenance are of poor quality 5- Follow occupational safety and health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange, and clean the workplace 7- Seek opportunities for improvement and development and present ideas to the direct supervisor 8- Work according to the W&M system and ensure accurate calculation and recording of corrective and preventive maintenance times in the SAP PM system Details: 1) Number of vacancies: 1 2) Shift system: morning and evening 3) Benefits: health insurance, social insurance, transportation allowance, meals, overtime

Role: - Responsible for maintenance and follow-up of the production line equipment and ensuring their good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adhere to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault on the production lines 3- Perform preventive maintenance for production lines according to the maintenance schedule throughout the year 4- Review spare parts inventory (maximum, minimum, and reorder point) and inform the direct manager if the spare parts used in maintenance work are of poor quality 5- Follow health and safety procedures and food safety within the factory and report any violations 6- Regularly organize, arrange, and clean the workplace 7- Seek improvement and development opportunities and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate recording of corrective and preventive maintenance times in the SAP PM system Additional details - Number of vacancies: 1 - Shifts: morning and evening - Benefits: medical insurance, social insurance, transportation allowance, meals, overtime

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring its good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adherence to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Carry out preventive maintenance for production lines according to the maintenance schedule during the year 4- Review warehouse stocks of spare parts (maximum and minimum levels and lead time) and inform the direct manager if the spare parts used in maintenance work are not of good quality 5- Follow occupational safety, health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange and keep the workplace clean 7- Seek opportunities for improvement and development and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate tracking of corrective and preventive maintenance times and record them in the SAP PM system <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

We are looking for mechanical technicians who are fresh graduates or have practical experience not exceeding 2 years, to join a practical training program within a professional industrial environment. Job Responsibilities – Mechanical Technician 1. Carrying out preventive and corrective maintenance work for mechanical equipment. 2. Inspecting equipment and detecting mechanical faults and issues. 3. Performing disassembly, assembly, repair, and replacement of damaged parts. 4. Handling emergency breakdowns and restoring equipment to operation. 5. Participating in maintenance work during planned plant shutdown periods. 6. Performing lubrication, alignment, and basic condition inspection of equipment. 7. Executing and logging work orders on the CMMS / SAP maintenance system. 8. Adhering to safety procedures, work permits, and safe energy isolation. 9. Coordinating with production, engineering, and planning teams during maintenance execution. 10. Logging breakdowns, technical remarks, and executed maintenance work. ← Application Requirements Fresh graduate or maximum 2 years of practical experience. Appropriate technical qualification for the specialization. Clear military status. Good command of English – essential requirement. Ability to learn, commit, and work within a team. Willingness to work in an industrial environment. Program Benefits Paid training for a full year. Practical and technical training within a major industrial company. Private medical insurance. Opportunity to gain real practical experience and develop technical skills. Job opportunities for top performers after the training period, based on company needs and performance evaluation. <p><strong>Additional Details</strong></p><ul><li>Number of Vacancies: 4</li><li>Shift System: Morning only</li><li>Benefits: Health Insurance, Social Insurance</li></ul>

<p>Operate CNC Laser machines and Laser cutters according to operating instructions and required drawings.</p> <p>Prepare and adjust the machine before operation and ensure its readiness.</p> <p>Perform cutting, drilling, and engraving operations with precision according to approved measurements and designs.</p> <p>Read and understand engineering drawings and operating files.</p> <p>Adjust machine settings such as speed, power, focus, and gases based on the material type.</p> <p>Conduct periodic machine inspections and perform simple maintenance and cleaning tasks.</p> <p>Ability to detect operational malfunctions and address them.</p> <p>Handle operational malfunctions and report technical faults requiring specialized intervention to the maintenance department.</p> <p>Monitor product quality during operation and ensure parts comply with required specifications.</p> <p>Adhere to safety and occupational health procedures while operating machines.</p> <p>Record production quantities, waste, and monitor raw material consumption.</p> <p>Collaborate with production supervisors and operations managers to achieve the required production plan.</p> <p><strong>Qualifications and Experience:</strong></p> <ul> <li>Intermediate or above technical qualification, preferably in mechanics or electricity.</li> <li>Previous experience in operating Laser CNC machines / Laser cutters.</li> <li>Preferred experience in metal buildings factories (hangars and trusses) or similar industries based on the nature of the work.</li> </ul> <p>- Work in Alexandria (accommodation available for expatriates).</p> <p>- Working days: Saturday to Thursday, from 8 AM to 4 PM.</p> <p><strong>Additional Details</strong></p> <ul> <li>Number of vacancies: 3</li> <li>Shift system: Morning only</li> <li>Benefits: Health insurance, social insurance, transportation allowance, overtime</li> </ul>

عن الشركة:شركة هامرز هي شركة رائدة في صناعة وسائل النقل الخفيف، متخصصة في تصنيع هياكل المركبات المعدنية، الأنظمة الميكانيكية، . نؤمن بالابتكار والجودة ونسعى لاستقطاب مهندسين ميكانيكا صيانه واستقبال  لقسم الصيانه وخدمه العملاء . المهام والمسؤوليات:.فحص وصيانة واستقبال وسائل النقل الخفيف لضمان أداء عالٍ وسلامة عمليات الصيانة .تنفيذ عمليات الصيانة الوقائية والإصلاحات طبقا لبوتوكول الضمان  في المصنع .العمل مع الفريق الفني لضمان استمرارية الإنتاج بكفاءة عالية.تحليل الأعطال الميكانيكية وتقديم حلول مبتكرة وفعّالة.إدارة وصيانة المركبات والمعدات الميكانيكية.إعداد تقارير دورية عن حالة المركبات وتقديم اقتراحات للتحسين.المؤهلات المطلوبة:درجة البكالوريوس في الهندسة الميكانيكية خبرة لا تقل عن [5] سنوات في مجال صيانة الآلات والمعدات الميكانيكية.معرفة قوية بتقنيات الصيانة لمعدات النقل الخفيف أو الثقيل .قدرة على تشخيص الأعطال وتقديم الحلول الفنية بشكل سريع وفعّال.مهارات في استخدام برامج الكمبيوتر الخاصة بالصيانة وإدارة الأعمال الفنية.القدرة على العمل تحت الضغط وفي بيئة عمل سريعة.سبق له العمل على برامج اودو او ما شبه المزايا:فرص للتدريب والتطوير المهني.بيئة عمل حديثة وداعمة.تأمين صحي واجتماعي. مزايا إضافية: تأمين طبى خاص و اجازات سنوية، حوافز أداء.يفضل من سكان العبور- القاهرة - الشرقية - بنها -عين شمس - موقف العاشر - السلام   لوجود خط سير باص<p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 3</li><li>نظام الورديات: صباحية فقط</li><li>المزايا: تأمين صحي، تأمين اجتماعي، بدل انتقال، وجبات، ساعات إضافية، مطلوب دراجة/موتوسيكل</li></ul>

عن الشركة:شركة هامرز هي شركة رائدة في صناعة وسائل النقل الخفيف، متخصصة في تصنيع هياكل المركبات المعدنية، الأنظمة الميكانيكية، . نؤمن بالابتكار والجودة ونسعى لاستقطاب مهندسين ميكانيكا صيانه واستقبال  لقسم الصيانه وخدمه العملاء . المهام والمسؤوليات:.فحص وصيانة واستقبال وسائل النقل الخفيف لضمان أداء عالٍ وسلامة عمليات الصيانة .تنفيذ عمليات الصيانة الوقائية والإصلاحات طبقا لبوتوكول الضمان  في المصنع .العمل مع الفريق الفني لضمان استمرارية الإنتاج بكفاءة عالية.تحليل الأعطال الميكانيكية وتقديم حلول مبتكرة وفعّالة.إدارة وصيانة المركبات والمعدات الميكانيكية.إعداد تقارير دورية عن حالة المركبات وتقديم اقتراحات للتحسين.المؤهلات المطلوبة:درجة البكالوريوس في الهندسة الميكانيكية خبرة لا تقل عن [5] سنوات في مجال صيانة الآلات والمعدات الميكانيكية.معرفة قوية بتقنيات الصيانة لمعدات النقل الخفيف أو الثقيل .قدرة على تشخيص الأعطال وتقديم الحلول الفنية بشكل سريع وفعّال.مهارات في استخدام برامج الكمبيوتر الخاصة بالصيانة وإدارة الأعمال الفنية.القدرة على العمل تحت الضغط وفي بيئة عمل سريعة.سبق له العمل على برامج اودو او ما شبه المزايا:فرص للتدريب والتطوير المهني.بيئة عمل حديثة وداعمة.تأمين صحي واجتماعي. مزايا إضافية: تأمين طبى خاص و اجازات سنوية، حوافز أداء.يفضل من سكان العبور- القاهرة - الشرقية - بنها -عين شمس - موقف العاشر - السلام   لوجود خط سير باص<p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 3</li><li>نظام الورديات: صباحية فقط</li><li>المزايا: تأمين صحي، تأمين اجتماعي، بدل انتقال، وجبات، ساعات إضافية، مطلوب دراجة/موتوسيكل</li></ul>

Job Title: Furniture Engineer. Location: New Borg El Arab City, Alexandria. Requirements:Minimum one year of experience in furniture or interior design. Proficiency in engineering design software such as Auto CAD, Sketch Up, or 3D Max. Comprehensive knowledge of wood, metals, and other materials used in antique furniture, utilizing computer-aided design (CAD) software. Ability to design diverse models, kitchens, and dressing rooms. Ability to provide accurate pricing and project evaluations. Ability to make substantial modifications to ideas and models to meet client requirements. Creativity in finding solutions to new problems. Excellent communication skills and ability to work within a team. Ability to work under pressure and meet deadlines. Responsibilities:Design furniture pieces, kitchens, and dressing rooms, and prepare shop drawings. Follow up on design implementation and supervise production phases. Provide detailed procedures for all projects related to specifications. Develop new innovations to produce new products. Benefits:Career development opportunities. How to Apply: Please send your CV along with samples of your previous work to info@wood-maker.net

Job Title: Furniture Engineer. Location: New Borg El Arab City, Alexandria. Requirements:Minimum one year of experience in furniture or interior design. Proficiency in engineering design software such as Auto CAD, Sketch Up, or 3D Max. Comprehensive knowledge of wood, metals, and other materials used in antique furniture, utilizing computer-aided design (CAD) software. Ability to design diverse models, kitchens, and dressing rooms. Ability to provide accurate pricing and project evaluations. Ability to make substantial modifications to ideas and models to meet client requirements. Creativity in finding solutions to new problems. Excellent communication skills and ability to work within a team. Ability to work under pressure and meet deadlines. Responsibilities:Design furniture pieces, kitchens, and dressing rooms, and prepare shop drawings. Follow up on design implementation and supervise production phases. Provide detailed procedures for all projects related to specifications. Develop new innovations to produce new products. Benefits:Career development opportunities. How to Apply: Please send your CV along with samples of your previous work to HR@arabengineers.net

Production Lines &amp; Utility EquipmentPosition: Electrical Technician Department: Maintenance Industry: Food &amp; Beverage Manufacturing Reporting To: Maintenance ManagerJob PurposeThe Electrical Technician is responsible for the installation, troubleshooting, preventive maintenance, corrective maintenance, and continuous improvement of electrical and automation systems supporting production lines and utility equipment within a food and beverage manufacturing facility.Key ResponsibilitiesPerform electrical troubleshooting and maintenance for production machinery and utility equipment.Diagnose and repair electrical faults, control circuits, sensors, motors, drives, contactors, relays, and control panels.Troubleshoot and maintain PLC and SCADA systems, including fault finding and basic program diagnostics.Perform electrical wiring, panel modifications, cable termination, and control-system connections.Execute preventive and corrective maintenance activities according to the maintenance plan.Support breakdown response to minimize equipment downtime and production losses.Identify recurring electrical problems and participate in Root Cause Analysis (RCA) and continuous improvement activities.Ensure proper calibration, operation, and condition of electrical instruments and sensors.Follow electrical safety procedures, LOTO requirements, and food &amp; beverage manufacturing standards.Coordinate with mechanical and production teams during troubleshooting and equipment interventions.Maintain proper documentation of breakdowns, maintenance activities, spare parts, and equipment conditions.Support equipment installation, commissioning, modification, and improvement projects.Main Production EquipmentThe technician should be capable of working on and troubleshooting electrical and automation systems associated with:JBT CAN Fillers and SeamersKRONES PalletizersKRONES DepalletizersKRONES VARIOPACKRONES ConveyorsPlate PasteurizersTube PasteurizersAssociated motors, VFDs, sensors, control panels, instrumentation, and automation systems.Utility EquipmentThe technician will also support electrical maintenance and troubleshooting for plant utility systems, including:Boilers and associated control systemsPumps and motorsCompressorsWater treatment and pumping systemsCIP systemsUtility control panels and instrumentationOther electrical and automation equipment supporting the production processRequired Technical SkillsStrong practical experience in PLC troubleshooting and automation systems.Good knowledge of SCADA systems and HMI troubleshooting.Strong electrical wiring and control-panel experience.Good understanding of industrial electrical systems, motors, VFDs, sensors, and instrumentation.Ability to read and understand electrical drawings and control schematics.Strong troubleshooting and problem-solving skills.Experience with preventive and corrective maintenance.Ability to work effectively in a high-speed production environment.Knowledge of food &amp; beverage production equipment and hygiene requirements is highly preferred.Candidate RecommendationThe candidate is strongly recommended for the Electrical Technician position. He has very good practical experience in PLC, SCADA, industrial electrical wiring, troubleshooting, and automation systems, which are highly relevant to the electrical maintenance requirements of food and beverage production lines.His technical background and hands-on experience make him well suited to support CAN fillers and seamers, palletizers, depalletizers, VARIOPAC, conveyors, pasteurizers, and plant utility equipment.Overall Recommendation: Recommended / Suitable for the Electrical Technician position.<p><strong>Additional Details</strong></p><ul><li>Number of Vacancies: 1</li><li>Shift System: Morning and Evening</li><li>Benefits: Health Insurance, Social Insurance, Transportation Allowance, Meals, Overtime</li></ul>

Job Title: After-Sales Service Manager** Tasks and Responsibilities: Managing after-sales service for all company home appliances according to the highest market service standards, with a high capability for problem-solving and decision-making. Also, following up on all tickets on the system and working on resolving them with a response in record time. Accurate diagnosis of faults and rejection of misuse cases with a photo report. Managing original spare parts inventory and reducing customer wait time for spare parts. Selecting and accrediting new service centers in the governorates. Training technicians at the JAC Academy on new models. Following up and inspecting technicians (attire - cleanliness - explanation of the fault) inside factories or our affiliated service centers. Following up on replacement and return cases with Consumer Protection and working to resolve them continuously. Continuous follow-up on all call center operations and following up with customers after maintenance to ensure quality standards. Managing all appliance maintenance tickets (TV screens – ceiling fan – stand fan – air cooler – water cooler – steam iron – microwave – vacuum cleaners – blender ... etc.). Responsible for activating the warranty and determining whether the fault is covered under warranty or due to misuse. Full familiarity with all job duties and adhering to all company regulations. The applicant must be a graduate of the Faculty of Engineering (Electrical – Mechanical – Mechatronics).<p><strong>Additional Details</strong></p><ul><li>Number of Vacancies: 1</li><li>Shift System: Morning only</li><li>Benefits: Health insurance, Social insurance, Transportation allowance, Accommodation, Overtime</li></ul>

 إدارة والإشراف على أعمال تركيب وتشغيل وصيانة وإصلاح المعدات الطبية، وضمان كفاءة الأجهزة واستمرارية تشغيلها لدى المستشفيات والعملاء وفق المعايير الفنية ومتطلبات السلامة والجودةالمسؤوليات الرئيسيةالإشراف على أعمال تركيب وتشغيل المعدات الطبية.  تشخيص الأعطال الفنية المعقدة وتحديد أسبابها.  وضع وتنفيذ خطط الصيانة الوقائية والدورية.  الإشراف على الفنيين وتوزيع مهام العمل عليهم.  مراجعة تقارير الصيانة والأعطال والإصلاحات.  متابعة أعمال الصيانة الطارئة والاستجابة لمشكلات العملاء.  التأكد من تنفيذ أعمال الصيانة طبقاً للمواصفات الفنية.  متابعة احتياجات قطع الغيار والأدوات والمستلزمات الفنية.  التواصل مع العملاء والمستشفيات لحل المشكلات الفنية.  إعداد التقارير الفنية الدورية للإدارة.  متابعة أداء المعدات وتحديد الاحتياجات المستقبلية للصيانة.  التأكد من الالتزام بمعايير السلامة والجودة أثناء العمل.  تدريب وتوجيه الفنيين عند الحاجة.  التنسيق مع الموردين أو الشركات المصنعة عند وجود أعطال أو مشكلات فنية متخصصة. المؤهلات والخبراتبكالوريوس هندسة، ويفضل تخصص أجهزة طبية أو كهرباء أو ميكانيكا، باور  خبرة سابقة في صيانة المعدات الطبية.  خبرة في التعامل مع المستشفيات والمنشآت الصحية تعتبر ميزة.  القدرة على قراءة المخططات والدوائر الكهربائية والإلكترونية.  إجادة استخدام برامج. Microsoft Office وإعداد التقارير الفنية  الاستعداد للعمل الميداني والتنقل بين مواقع العملاء.المهاراتمهارات قوية في التشخيص وحل المشكلات.  القيادة والإشراف على فرق العمل.  مهارات التواصل والتعامل مع العملاء.  القدرة على العمل تحت ضغط.  التنظيم وإدارة الوقت.  الدقة والاهتمام بالتفاصيل.  الالتزام بمعايير الجودة والسلامة<p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 8</li><li>نظام الورديات: صباحية فقط</li><li>المزايا: تأمين صحي، تأمين اجتماعي، بدل انتقال</li></ul>

pastries and bakery chef for the mine site (Bakery & Pastry Chef) The job role is to operate and manage the pastries and bakery department in the kitchen to produce high-quality daily menus for the workforce on site. This role includes preparing ingredients, innovating a wide range of fresh pastries, and decorating desserts to present them attractively, in addition to handling related administrative and paperwork tasks. Working under company directives, the successful holder of the role will uphold excellent food safety and hygiene standards while collaborating with the chief chef of the section to ensure an efficient and high-performing work environment. • Job site: On-site at Marsa Alam • Contract type: Permanent, full-time • Work system (shifts): 20 working days / 10 days off • Benefits and compensation: competitive salary and comprehensive benefits package Main duties and responsibilities • Operating the department and executing the menus: managing and running the pastries and bakery section in the kitchen, preparing desserts, pastries, and pastries according to specified recipes to meet daily menus. Developing new innovative recipes for seasonal dessert menus. • Baking and ingredient preparation: preparing raw ingredients, testing food flavors to ensure exceptional taste, and safely handling commercial baking and kitchen equipment. • Plating and presentation: decorating and presenting desserts and pastries to ensure they are presented in a beautiful, appetizing, and appealing way for residents at the camp and site workers. • Commitment to safety, health, hygiene, and food safety: adhering to strict cleanliness and safety standards on site. Ensuring the department complies with health regulations, maintaining cleanliness of the workstation, applying proper storage methods for raw materials, and meeting internal and external audit requirements. • Departmental administration and documentation: using basic management skills to handle required kitchen documents and paperwork. Identifying and reporting all required equipment maintenance work, and proactively recommending tools or materials that would facilitate or improve task completion. Qualifications and requirements • Educational qualification: a diploma or above from a tourism and hotels school/institute, or an equivalent field. A valid and recognized Hygiene Certificate is preferred. • Practical experience: at least 5 years of hands-on experience in the production of pastries and bakery products. Strongly preferred for those with specific experience in large-scale catering, or remote-site camps, or high-volume food production environments. Prior experience in the gold mining sector is not required. • Knowledge and skills: practical and in-depth familiarity with global food safety standards and compliance, and knowledge of commercial kitchen equipment. Basic administrative abilities and readiness to complete routine production paperwork. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 5</li><li>Shift system: mornings only</li><li>Benefits: health insurance, social security, transportation allowance, meals, housing, overtime</li></ul>

Operate equipment and production lines according to operating instructions. Prepare the production line before start-up and ensure its readiness. Monitor production progress and report any faults or stoppages as soon as they occur. Set simple machine settings according to supervisor instructions. Ensure product quality during operation and report any non-conforming products. Adhere to the daily production plan and achieve the production target. Maintain cleanliness and order of the work area and apply 5S principles. Comply with food safety, quality, health and safety procedures. Record operating and production data in the approved forms. Collaborate with maintenance, quality, and warehouse teams to ensure continuous operation. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning only</li><li>Benefits: health insurance, social security, transportation allowance, housing, overtime</li></ul>

Key duties and responsibilities: Management of freezing and processing lines: direct supervision of the operation and maintenance of quick-freezing lines (IQF), freezing tunnels, vegetable soaking and blanching lines, and sorting and optical sorting equipment (Optical Sorters). Management of central cooling systems: monitoring and operation of large cooling units (ammonia- or Freon-based) and frozen storage rooms at temperatures of -18°C or lower. Preventive and emergency maintenance management: developing and implementing preventive maintenance plans (PPM) for all equipment and facilities (boilers, air compressors, water treatment plants, electrical transformers) to reduce downtime. Food safety and occupational health: ensuring all engineering operations comply with food quality standards (HACCP, BRC, ISO 22000), and ensuring the use of food-grade oils and maintenance materials. Budgeting and cost management: preparing the annual engineering department budget, managing spare parts, and conserving energy (electricity, water, gas). Team leadership: managing and developing the engineers and technicians team, assigning tasks, and training them on the latest maintenance and safety techniques. Qualifications and experience: Education: Bachelor's degree in Engineering (Mechanical / Mechatronics / Electrical). Experience: 8-10 years of experience in the food industries, including 3-5 years in a leadership role in frozen foods plants or industrial cooling and freezing. Technical knowledge: Deep knowledge of Ammonia Refrigeration Systems. Advanced familiarity with IQF equipment and vegetable processing and packaging lines. Experience with computerized maintenance management systems (CMMS) and control systems (PLC & SCADA). Soft skills: High problem-solving and quick decision-making ability during operational crises. Strong leadership and effective communication skills; experience managing multi-disciplinary teams. Strategic thinking, project management, and on-site expansion management. <strong>Additional details</strong> <ul><li>Vacancies: 1</li><li>Shift system: Morning and evening</li><li>Benefits: Health insurance, social security, housing</li></ul>

Production engineer for training and working on a CNC machine<br>Preferred from Al-Mansoura

Required architect (design office and designs) - finishing and real estate development company in Al-Hadh? (unclear)

Sales Engineer<br>The company operates in the field of sales - design - websites - maintenance of solar power plants.<br><br>

Chemical engineer with experience in Compounding, plastic extruder, artificial leather, and polyurethane systems

Quality Engineer and Testing<br>Objective<br>To verify the quality of work through inspection, testing, and documentation.<br><br> <br>Responsibilities<br>