Car painter Jobs - Giza Egypt

Job tasks - Execute installation and maintenance of cranes and asphalt and concrete plants. - Diagnose mechanical faults and perform corrective and preventive maintenance. - Perform disassembly, assembly, and alignment of mechanical components according to technical standards. - Maintain pneumatic systems and ensure their operational efficiency. Qualifications and requirements - Previous experience in mechanical maintenance at factories or industrial companies. - Ability to diagnose mechanical faults and perform preventive maintenance. - Good knowledge of engines, gearboxes, and power transmission systems. - Ability to read mechanical drawings. - Preference for experience in maintenance and operation of overhead cranes and industrial equipment. <strong>Additional details</strong> - Number of vacancies: 2 - Shift system: Morning only - Benefits: Health insurance, social security, transportation allowance, housing, overtime

1- A valid Safety Certificate. 2- Workplace safety and environmental hazards test. 3- Verification of the availability or monitoring of the use of safety equipment. 4- Supplying, operating, or following up on maintenance of personal protective equipment. 5- Keeping all safety and environmental records and documents required. 6- Supporting risk assessment preparation. 7- Supporting the emergency response training plan. 8- Recommending and following corrective actions. 9- Training workers on job-related safety procedures. 10- Inspecting fire extinguishing systems or portable fire systems to ensure safe operations. 11- Defining and monitoring contractors and visitors. 12- Preparing work permits.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning and Evening</li><li>Benefits: Health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

&bull; Ensure all equipment has been properly repaired. * Experience in maintenance for stamping, injection molding, or plastic manufacturing lines * Maintenance of conveyors and gearboxes of all types * Familiar with maintenance of compressed air and hydraulic circuits * Maintenance and operation of vacuum pumps and air blowers * Ability to perform welding and simple brazing * Ability to use precision measuring tools, take measurements, and receive manufactured spare parts • Record test procedures and results, numerical and graphical data, and recommendations for changes in the product or test method. • Report health, safety, and environmental related incidents to the HSE team. <p><strong>Additional details</strong></p><ul><li>Vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Experience not less than 5 years in the field of mechanics of centrifuge lines..2 preferred someone with previous experience in the food industries..3 ability to work under pressure and solve problems quickly..4 strong communication skills with colleagues and customers..5 attention to detail and accuracy in work..6 ability to work in a team and achieve common goals..7 good knowledge of safety and occupational health systems..8 ability to use modern measuring and diagnostic tools..9 willingness to continuous learning and skill development..10 adaptation to changes in the work environment..11 advanced knowledge of mechanical and hydraulic systems..12 skills in maintenance and repair of equipment..13 ability to read technical and engineering drawings<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Diagnosis and repair of electrical and control faults in distribution panels, protection switches, AC and DC motors, transformers, and UPS power systems. Maintenance and inspection of PLC systems, industrial control units (HMI, I/O modules), and sensor and motor connectors (VFD/AC drives), and programming/adjusting PLC programs when needed (per engineering instructions). Conduct periodic electrical file checks, insulation testing, current and voltage measurements, and earth and system protection tests. Implement and maintain cables, connections, cabling, and cable routing management. Perform preventive maintenance on electric motors, generators, insulation switches, circuit breakers, and control panels. Verify protective settings (relays) and adjust them in coordination with the maintenance engineer to ensure equipment and circuit protection. Record all maintenance work, tests, and measurements in the CMMS and prepare fault reports and root cause analyses. Contribute to projects for installing new machines, integrating control systems, and testing systems before operation (SAT). Monitor spare parts inventory for electrical and control equipment and propose purchase orders when needed. Implement electrical safety procedures and lead safety activities (lockout/tagout, discharge of charges, use of personal protective equipment). Train and guide junior technicians and assist in evaluating the technical team's skills.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Day and evening shifts</li><li>Open to people with disabilities (mobility impairment)</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Operate the laminating machine according to operating instructions and production plan. Adjust machine settings to suit the type of paper, cardboard, and adhesive. Monitor the quality of adhesion and ensure no air bubbles or delamination between layers. Review paper dimensions and alignment between print and carton before starting. Monitor product quality during operation and make necessary adjustments. Adhere to targeted production rates and reduce waste. Clean and maintain the machine and perform simple daily maintenance (Autonomous Maintenance). Immediately report any faults or technical problems affecting production. Record operating, production, and scrap data in approved forms. Comply with quality and food safety instructions (when producing food packaging) and occupational safety and health procedures. Keep the work area clean. Collaborate with the Printing, Offest, Die-Cut, and finishing departments to ensure smooth production. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: morning only</li><li>Welcomes applicants with special needs (mild mobility impairment)</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Carrying out preventive and regular maintenance work for production molds according to the approved maintenance plan. Performing corrective maintenance and necessary repairs for damaged molds. Dismantling, assembling, and reassembling molds in preparation for operation or maintenance. Inspecting molds and ensuring their safety and quality before and after operation. Replacing damaged or worn parts of molds. Using precise measuring tools to ensure dimensional and technical specification compliance. Diagnosing mold-related faults and working to resolve them as quickly as possible to minimize production downtime. Cleaning and polishing molds and maintaining them to ensure final product quality. Recording all maintenance and repair work and preparing related reports. Collaborating with Production, Quality, and Maintenance departments to ensure efficient mold operation. Adhering to occupational safety and health procedures and using personal protective equipment. Maintaining cleanliness and order in the mold workshop and tools used. <p><strong>Additional details</strong></p><ul><li>Vacancies: 3</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Job requirements: - Ability to travel constantly and work in all governorates of Egypt - Ability to work in morning and evening shifts - Experience of at least 5 years in the electrical field - Clear stance on recruitment - No housing for expatriates - Housing provided at sites outside Cairo and Giza - Please send CV to number ***********<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 5</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing</li></ul>

Review structural drawings and shop drawings to ensure compliance with approved designs. Prepare shop drawings and coordinate with different disciplines. Prepare and quantify (BOQ & Quantity Survey) for structural works. Prepare monthly progress reports and monitor works executed. Prepare material requests and follow up on approval. Review and approve drawings submitted by contractors and suppliers. Coordinate with the consultant and contractors to resolve technical issues. Contribute to preparing schedules and track progress rates. Qualifications: Bachelor of Civil Engineering (Construction). 3 to 5 years of experience in the technical office for construction or real estate projects. Good knowledge of technical specifications and building codes. Required software: AutoCAD. SAP- ETAP- SAFE< p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: mornings only</li><li>Benefits: social security, overtime</li></ul>

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring good technical condition. Responsibilities: 1- Monitor the technical condition of production line equipment and adhere to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Conduct preventive maintenance for production lines according to the maintenance schedule throughout the year 4- Review warehouse stock of spare parts (maximum, minimum, and reorder point) and inform the direct supervisor if the spare parts used in maintenance are of poor quality 5- Follow occupational safety and health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange, and clean the workplace 7- Seek opportunities for improvement and development and present ideas to the direct supervisor 8- Work according to the W&M system and ensure accurate calculation and recording of corrective and preventive maintenance times in the SAP PM system Details: 1) Number of vacancies: 1 2) Shift system: morning and evening 3) Benefits: health insurance, social insurance, transportation allowance, meals, overtime

Role: - Responsible for maintenance and follow-up of the production line equipment and ensuring their good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adhere to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault on the production lines 3- Perform preventive maintenance for production lines according to the maintenance schedule throughout the year 4- Review spare parts inventory (maximum, minimum, and reorder point) and inform the direct manager if the spare parts used in maintenance work are of poor quality 5- Follow health and safety procedures and food safety within the factory and report any violations 6- Regularly organize, arrange, and clean the workplace 7- Seek improvement and development opportunities and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate recording of corrective and preventive maintenance times in the SAP PM system Additional details - Number of vacancies: 1 - Shifts: morning and evening - Benefits: medical insurance, social insurance, transportation allowance, meals, overtime

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring its good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adherence to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Carry out preventive maintenance for production lines according to the maintenance schedule during the year 4- Review warehouse stocks of spare parts (maximum and minimum levels and lead time) and inform the direct manager if the spare parts used in maintenance work are not of good quality 5- Follow occupational safety, health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange and keep the workplace clean 7- Seek opportunities for improvement and development and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate tracking of corrective and preventive maintenance times and record them in the SAP PM system <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Experience in steam boilers and mineral oil boilers. Job duties: Reading drawings and diagrams and taking or reading measurements to plan procedures for carrying out boiler maintenance. Carrying out scheduled boiler maintenance according to programs prepared by supervisors. Perform preventive maintenance of boilers. Carrying out boiler maintenance tasks assigned to him effectively, selecting the appropriate tools for the job and maintaining them. Prepare lists of suitable spare parts for the work. Commitment to using personal protective equipment at all work sites. Apply occupational health and safety standards in the repair and installation process. Any new tasks within the scope of the job, to be determined by the direct manager according to work requirements and circumstances. Commitment to food safety instructions and good manufacturing practices for the company. Work system: 24-hour shifts. Work location: Sixth of October City - Giza. Experience in steam and mineral oil boilers. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Role:- Responsible for the maintenance and monitoring of production line equipment and ensuring its good technical condition. Responsibilities: 1- Monitor the technical condition of production line equipment and comply with the standardized work steps (SOP). 2- Perform corrective maintenance in case of any mechanical fault in production lines. 3- Carry out preventive maintenance for production lines according to the maintenance schedule throughout the year. 4- Review spare parts stock levels (maximum, minimum, and reorder point) and inform the direct manager if the spare parts used in maintenance works are of poor quality. 5- Follow occupational safety, health and food safety procedures inside the factory and report any violations. 6- Search for various improvement and development opportunities and present ideas to the direct manager. Skills: 1. At least two years of experience, preferably in food factories. 2. A secondary qualification of industrial diploma specializing in (mechanical maintenance) or higher. 3. Ability to work in a team. 4. Communication skills.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Responsibilities:Production:• Implement the plan with a focus on achieving actual efficiency and net efficiency.• Operate production line machines• Collect his machine data for the final product to calculate the scrap rate during his shift.• Immediately report any machine stoppage to the direct supervisor.Self-maintenance:• Perform self-maintenance activities for the machine assigned to him (cleaning, inspection, lubrication, and tightening) according to preventive maintenance:• Perform the tasks assigned to him from corrective and preventive maintenanceTroubleshooting / Planned maintenance / Overhauls:• Under the supervision of the shift supervisor, work on addressing minor mechanical stoppages on the production line (0 to 30 minutes).• Under the supervision of the shift supervisor and the maintenance manager, work on major mechanical stoppages and planned maintenance, interventions, and overhauls.Other:• Perform activities assigned related to HACCP / TPM / AIB• Adhere to the implementation of safety and occupational health guidelines and requirements (EHS) in all assigned tasks.• Adhere to all food safety requirements during production and maintenance activities.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social security, transport allowance, meals, overtime</li></ul>

<p><strong>Job Overview and Company</strong></p><p>Join our team as a Cooling and Air Conditioning Technician where we are committed to delivering high-quality cooling and air conditioning solutions to our customers in the Egyptian market, especially in the Giza or Cairo area.</p><p>We are a leading company in the engineering services and maintenance sector, offering a professional work environment, professional development opportunities, and competitive benefits for committed and permanent employees.</p><p>&nbsp;</p><p><strong>Main Responsibilities and Duties</strong></p><ul><li>Diagnose faults in cooling and air conditioning systems, determine the necessary corrective actions, and perform repairs according to technical standards</li><li>Procure, install, and commission cooling and air conditioning systems according to company specifications and regulatory authorities</li><li>Perform regular preventive maintenance and repair faults in air conditioning units, compressors, condensers, and piping to ensure optimal performance and energy efficiency</li><li>Document all works with precise technical forms and service reports and submit them to supervisors according to approved procedures</li><li>Handle spare parts, estimate maintenance needs, and monitor inventories to ensure required parts are available in a timely manner</li><li>Adhere to occupational health and safety and environmental standards and ensure safety procedures are applied during all fieldwork</li><li>Communicate effectively with customers to ensure their satisfaction and provide the necessary technical advice to maintain equipment</li></ul><p>&nbsp;</p><p><strong>Qualifications and Requirements</strong></p><ul><li>Three-year diploma in Cooling and Air Conditioning or related Mechanical/Electrical Engineering</li><li>Practical experience of 3 to 5 years in cooling and air conditioning, preferably on maintenance and service projects</li><li>Familiarity with low- and medium-pressure cooling systems, understanding of central air conditioning systems and air handling units</li><li>Knowledge of basic electricity and electronics related to cooling and air conditioning systems</li><li>Ability to read schematics, technical drawings, and technical documents</li><li>Ability to work under pressure and flexible hours when needed</li></ul><p>&nbsp;</p><p><strong>Required Skills</strong></p><ul><li>High technical skills in diagnostics and repairs and commitment to quality standards</li><li>Excellent communication with customers, team, and management</li><li>Ability to plan, organize, and manage time effectively</li><li>Principles of occupational safety and adherence to health and safety procedures</li><li>Skill in using measurement tools, inspecting systems, and documenting work</li></ul><p>&nbsp;</p><p><strong>Benefits and Perks</strong></p><ul><li>Competitive salary with performance-based incentives</li><li>Social and health insurance in accordance with approved laws</li><li>Opportunities for professional development and ongoing training within the company</li><li>Professional and supportive work environment with opportunities for promotion within the Engineering department</li></ul>

Tasks: Assembly work for aluminum doors and windows. Conduct installation work on sites (windows – doors – facades). Commitment to quality of execution and working timetables. Conditions: at least 5 years of experience in assembly and installation. Good knowledge of common sections and basics of craftsmanship. Proficiency in using various tools and equipment. Willingness to travel as required by work. Benefits: 8 hours of work + lunch break + overtime. Travel allowance for installations outside Greater Cairo and Giza + meal allowance. Official holidays + regular salaries + advances. Salary is determined by experience. Residence preferred within (Haram – Giza – Marioutiya – Shobra al-Din – Manial) and surrounding areas. In case of expatriates from provinces, housing is provided near the factory on condition of having 5 expatriate technicians. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 15</li><li>Shift system: morning only</li><li>Benefits: health insurance, social insurance, overtime</li></ul>

Responsibilities and main tasks Perform preventive and corrective maintenance work for all mechanical equipment and systems within the branch. Conduct regular inspection of entertainment games and mechanical equipment to ensure readiness and safe operation. Diagnose mechanical faults, determine their causes, and take necessary actions to repair them. Perform disassembly, assembly, and replacement of defective parts according to manufacturer instructions. Maintain engines, transmissions, belts, gears, bearings (roller bearings), and other mechanical components. Perform lubrication, cleaning, and periodic calibration of equipment according to maintenance plans. Collaborate with electrical maintenance technicians on joint maintenance work to ensure integrated operation of equipment. Immediate response to emergency faults and work to minimize equipment downtime. Shut down any game or equipment that poses a risk to visitors' safety and report to the supervisor immediately. Ensure the use of the appropriate tools and keep them maintained. Record all maintenance and repair work in approved forms or systems. Prepare reports on recurring faults and propose suitable solutions to prevent recurrence. Monitor spare parts and tools needs and report them before depletion. Maintain cleanliness and order of the maintenance workshop and work sites. Commitment to occupational health and safety procedures and use of personal protective equipment. Adhere to company policies and procedures and operating instructions. Perform any other tasks assigned by the direct supervisor within the job scope. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social security, transportation allowance, overtime</li></ul>

1 - علي دراية تامه بتشغيل الغلايات بالمصانع<br>2 - لديه القدرة على اجراء الصيانات الخفيفه والطارئة والوقائية<br>3 - متابعة بيت النار والضغوط

Job Responsibilities:Prepare manufacturing and shop drawings for Sheet Metal products.Review engineering drawings and convert them into detailed production drawings.Prepare Bills of Materials (BOM) and production documentation.Coordinate with Production, Planning, and Purchasing departments to ensure smooth workflow.Provide technical support and resolve engineering issues during the manufacturing process.Ensure compliance with technical specifications and quality standards.Requirements:Bachelor's degree in Mechanical Engineering or a related field.3-5 years of experience in the Sheet Metal industry.Proficiency in SolidWorks and AutoCAD.Good knowledge of Sheet Metal manufacturing processes, including Laser Cutting, Punching, Bending, and Welding.Ability to read and interpret engineering drawings.Strong communication, problem-solving, and teamwork<p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 1</li><li>نظام الورديات: صباحية فقط</li><li>المزايا: تأمين صحي، تأمين اجتماعي</li></ul>