Oil

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Responsible for overseeing Electrical Engineering activities in Onshore Project, ensuring all technical requirements such as project specifications, data sheets, etc. are in full compliance with project requirements, standardized processes, and are delivered to the highest technical quality standards.</li> </ul><br><ul> <li>Accountable for ensuring execution of work is technically aligned and in compliance with LNG Operations, Policies, Standards of Business Conduct and Project Management System.</li> <li>Leads electrical engineering design and planning activities and ensures contractors develop detailed design in accordance with local regulatory requirements, industry standards, project specifications and any approved variations.</li> <li>Resolve electrical discipline issues to ensure engineering design addresses Project's expectations and objectives.</li> <li>Communicate and elevate issues before they escalate to Project Management when necessary.</li> <li>Review, evaluate and advise on electrical simulations, optimization, in compliance with design methods, safety factors (for Large Electrical Generation and Distribution System, Large motor drivers, VFDs in both Motoring and Generating modes, combined cycle power generation, HV switchgears, Electrical Integrated Control System (ELICS) and Power management System for Generation, Load sharing and Distribution Control).</li> <li>Review technical aspects of electrical equipment purchase orders with Contractor and vendors in accordance with the roles and responsibilities stated in applicable contract(s) to ensure safe and seamless integration of new electrical equipment into the existing operating facilities (when applicable).</li> <li>Assess discipline plans and work schedules to ensure effective completion of project activities and provide data (narrative, charts, graphs), change management recommendations and recovery plans to address any schedule delays.</li> <li>Develop, update and amend design / project philosophies, specifications and procedures ensuring that all references to Electrical Engineering are current and relevant.</li> <li>Monitor and provide guidance to Contractor to ensure key discipline deliverables, progress/milestones are met.</li> <li>Recommend additional technical support where necessary to address gaps.</li> <li>Coordinate and analyze discipline issues for resolution. Provide Electrical Engineering input to other engineering disciplines, construction, procurement etc. as necessary.</li> <li>Support commissioning, start-up and system completing activities and make appropriate recommendations to management on Electrical matters.</li> <li>Leads Electrical interface coordination with offshore, onshore, RLIC, and Kahramaa power supplier, or any third party, as required.</li> </ul><br><ul> <li>Bachelor Degree in Electrical Engineering</li> <li>8 years' experience in Piping Engineering roles, including 4 years in the Oil &amp; Gas Industry, and 1 years' experience in a supervisory or acting role, or oversight of contractor / subcontractors / service / vendor personnel.</li> <li>Preferable experience in a major LNG Project.</li> <li>Broad knowledge of engineering execution includes design standards, specifications, codes, safety criteria, onshore LNG facilities and utility systems design, construction and operations.</li> <li>Requires demonstrated broad Electrical equipment and systems experience (HV/MV/LV electrical systems design, transformers, switchgear, power management systems, electrical system controls for reactive and active power sharing, power distribution control, large Motors, 40MW+) and familiarity with relevant manufacturing processes and relevant industry codes.</li> <li>High voltage and large-scale onshore power design requirements.</li> <li>Excellent written and oral English skills.</li> <li>Strong organizational, planning and coordination skills.</li> <li>Strong technical, prioritization and management skills.</li> <li>Good communication, influence and interface skills.</li> <li>Proficient in Microsoft Office suite software programs, etc.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>36 Months, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Remarkable people, trusted by clients to design and advance the world</strong></p><br><p>You’re making the most of your student journey, learning, growing, and building memories. Now it’s time to take the next big step and turn your potential into real-world impact.</p><br><p>Kick-start your career with an internship that challenges you, inspires you, and pushes you beyond your own expectations. Whether on a local stage or in a global environment, this is your opportunity to gain hands-on experience, sharpen your skills, and make a difference from day one.</p><br><p>At Wood, we offer more than just an internship, we offer a launchpad for your future. If you’re ready to challenge yourself and be part of something meaningful, your journey starts here.</p><br><p>We are seeking a motivated and detail-oriented Offshore Structural Engineering Intern to join our structural team. The internship is designed to provide hands-on experience in offshore structural design principles, with a strong focus on developing practical engineering tools using Excel.</p><br><p>The successful candidate will gain exposure to real engineering design scenarios and contribute to the development of simplified calculation tools used in offshore projects.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in:</p><br><p>Onshore Oil and Gas&nbsp;</p><br><p><strong>Typical responsibilities</strong></p><br><ul> <li>As Intern, you are responsible for supporting [Department/Team/Project] in achieving its objectives by contributing to key projects, tasks, and daily operations. You play an active role in assisting with [Department/Team/Project] initiatives, bringing a fresh perspective, supporting process improvements, and ensuring efficient execution of assigned responsibilities. You help the [Department/Team/Project] meet its goals, delivering high-quality work.</li> <li>Develop Excel-based design sheets for:&nbsp; <ul> <li>Padeye design (lifting point analysis)</li> <li>Simplified fatigue analysis</li> <li>Bolted connection design</li> <li>Beam design and verification</li> <li>Ensure structured, user-friendly, and transparent calculation sheets</li> </ul></li> <li>Structural Engineering Support <ul> <li>Assist in basic structural calculations under supervision</li> <li>Perform preliminary design checks for offshore structures</li> <li>Support preparation of engineering calculation reports</li> </ul></li></ul><br>Qualifications:<br><ul> <li>Bachelor’s degree (or final-year student) in:&nbsp; <ul> <li>Civil Engineering</li> <li>Structural Engineering</li> <li>Naval Architecture Engineering</li> </ul></li> <li>Basic understanding of structural analysis and design&nbsp;</li> <li>Familiarity with steel design concepts&nbsp;</li> <li>Strong proficiency in Microsoft Excel (formulas, formatting; VBA is a plus)</li> <li>Strong analytical and problem-solving abilities&nbsp;</li> <li>Good communication and reporting skills&nbsp;</li> <li>Willingness to learn and take initiative</li></ul><p><strong>Required Skills &amp; Qualifications:</strong></p><br><p><strong>Internship Duration</strong></p><br><ul> <li>Typically, <strong>6–8 weeks</strong> (flexible based on requirement)</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for marine safety, quality assurance and compliance for Compression projects marine scope in accordance with the LNG Marine Operations Procedures and further revisions, international regulations and standards, classification society, flag state, local regulations. Consistently guide and coordinate the work of the project marine leads and coordinators assigned to the individual Compression projects. Compression projects focal point and custodian of the marine safety and quality assurance activities for all marine units engaged on the projects and manages marine assurance processes across Compression projects including vessel suitability assessments, marine assurance inspections and audits (e.g. OVID), marine warranty surveys, DP assurance. Ensure that Contractor personnel and Company Teams are qualified, trained and with suitable level of experience and expertise with respect to marine activities. Managing active interfaces and engagements with OPCO Marine, and Compression PMTs to ensure the marine scope is executed consistently, effectively and efficiently to achieve project objectives. Establish effective communication and strategic connection among critical project stakeholders including Marine Contractors to identify and implement solutions in a timely manner. Facilitate and support resolution-oriented communication among marine stakeholders and Marine Contractors, vessels owners, contractors and third parties. Implement and maintain an efficient Marine Incident Reporting System, support root causes analysis and corrective action identification and implementation, lead critical marine incident investigations (as marine SME), attend offshore survey/inspections and marine audits as needed. Implement and execute an effective lesson learned process of identifying, capturing process and timely sharing mechanism among key marine stakeholders for high value learnings. Providing focus and support to emergent/ unplanned situations such as breakdowns and incidents that demand immediate priority without compromise to ongoing activity. Strong commitment to Safety Leadership supported by extensive knowledge of safety protocols and best practices in the Maritime Industry. Participate in risks screening and assessment and ensure all mitigations measures are safely and timely implemented. Support Shared Resources and PMT T&amp;I teams to review and validate technical and execution deliverables associated with T&amp;I scope execution (as appropriate). Coordinate with MWS and contractor's marine team with regards to the marine assurance scope, including vessels suitability surveys (VSS) and DP audits. Ensure the findings are closeout to meeting the project marine compliance requirements and maintain the vessels inspections and audits database for PMT and T&amp;I team's reference.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in sciences, marine disciplines, or engineering or Marine First-Class Certificate of Competency</li><li>10 years seagoing experience as a shipboard engineer or sea officer, including 2 years as Chief Engineer or Master</li><li>Experienced in handling/managing offshore marine units operating in the oil and gas industry.</li><li>Broad and extensive knowledge of critical marine operations including offshore installation and construction vessels and barges, heavy lifts, transportation, pipe and cable lay, jack-up accommodation barges, dive support vessels.</li><li>Knowledge of Dynamic Positioning Systems &amp; Operations, DP FMEA Analysis, DP FMEA Proving Trials, Annual DP Trials, ASOG/CAM.</li><li>Experienced in managing marine safety and quality assurance &amp; compliance processes, following corporate requirements and international standards.</li><li>High knowledgeable in International Maritime Regulations, Codes and Standards.</li><li>Experience within the Middle East region is advantageous.</li><li>Previous Marine Warranty Surveyor (MWS) and Marine Consultancy experience is advantageous.</li><li>International Marine Contractors Association (IMCA) accreditation &amp; certification is preferred.</li><li>Local and international maritime regulations (e.g., IMO, SOLAS, MARPOL, ISM Code).</li><li>Ability to work on or be based on a platform or vessel.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Reviews Project Scheduling, Progress Measurement and Reporting requirements for execution of the project.</p><p>Software Proficiency: Advanced proficiency in Primavera P6 and Microsoft Project.<br>Core Scheduling: Strong knowledge of Work Breakdown Structure (WBS), Critical Path Method (CPM), resource loading, and schedule optimization.</p><p>Project Controls: Experience in project controls, progress measurement systems, earned value management, cash flow forecasting, and S-curve analysis. Schedule Management: Ability to develop, monitor, and control integrated project schedules covering engineering, procurement, fabrication, offshore installation, and commissioning activities. Offshore Operations: Knowledge of offshore construction methodologies, marine operations, heavy lifting, hook-up, commissioning, and shutdown planning. Safety &amp; Risk Systems: Familiarity with offshore platform operations, SIMOPS, HSE requirements, permit-to-work systems, and risk management. Work Environment: Experience in offshore fabrication yards, installation campaigns, and project execution environments. Preferred Advantage: Understanding of QatarEnergy project requirements is an advantage.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Engineering (PMP, PMI-SP certification) Years of Experience: 15+ years of experience in EPC/Oil &amp; Gas projects including 3-5 years in Offshore </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong><u>Key Responsibilities&nbsp;</u></strong></span></p><br><ul><li><span>Builds positive working relationships with external parties such as the customer, suppliers, and contractors.&nbsp;</span></li><li><span>Proactively resolve performance, scope, cost and schedule issues with the Client as they arise.</span></li><li><span>Ability to identify and achieve the optimal technical and commercial position within the job context</span></li><li><span>Monitor design activities, interdisciplinary data flow and communications.</span></li><li><span>Responsible for design basis, design scopes and subsequent performance</span></li><li><span>Manage, technical evaluations, risks identification, mitigation &amp; control, project deliverables review, scope control &amp; managing project variations, recovery planning, construction, commissioning, &amp; project handover.</span></li><li><span>Prepare Project Scope Statement.</span></li><li><span>Design reviews and technical review meetings are scheduled, well documented and actions closed out.</span></li><li><span>Client approvals are achieved without delay or rework.</span></li><li><span>Consistently achieve above average client satisfaction rating for technical delivery.</span></li><li><span>Management of disciplines to achieve scope completion at or below budget.</span></li><li><span>Prompt claims identification, quantification and justification provided to project manager.</span></li></ul><p><span><strong><u>HSE Capability:</u>&nbsp;&nbsp;&nbsp;</strong>&nbsp;</span></p><br><ul><li><span>Maintain HSE focus with the team to ensure OHSE requirements.</span></li><li><span>Demonstrate behaviour and business practices commensurate with a culture of world’s best health, safety and environmental performance.</span></li></ul> <p><span><strong><u>Education – Qualifications, Accreditation, Training:&nbsp;</u>&nbsp;&nbsp;&nbsp;</strong></span></p><br><ul><li><span>Full-Time Bachelor’s Degree in Engineering from an accredited university</span></li><li><span>MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period.</span></li><li><span>Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage</span></li></ul><p><span><strong><u>Industry Specific Experience:&nbsp;</u></strong></span></p><br><ul><li><span>Extensive work experience in onshore projects at a senior level within the Oil &amp; Gas industry.</span></li><li><span>Must have experience of working with multidisciplinary teams</span></li><li><span>Must have well developed engineering planning skills</span></li><li><span>Preferably Middle East experience</span></li><li><span>Experience working with an international engineering consultancy</span></li><li><span>Experience in interface management with Statutory authorities and external stakeholders&nbsp;</span></li><li><span>Strong experience in brownfield environment&nbsp;</span></li><li><span>Mandatory experience in Pre-FEED and FEED phase&nbsp;</span></li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p>Department OPERATED OFFSHORE OIL FIELD DEVELOPMENT Primary Purpose of the Job Responsible to plan, coordinate, supervise logging operations both open and cased hole logs for QatarEnergy operated offshore Idd El-Shargi field. Produce cost effective and comprehensive data acquisition plan for on-going drilling, workover operation as well as reservoir surveillance rigless activities. Provide quick petrophysical analysis for appropriate completion strategy during drilling operation and generate post-operation detail petrophysical interpretation and report to reservoir management team. Update and support Idd El-Shargi Studies team regularly and as required. Provide petrophysical input into integrated reservoir/field development studies for subsurface model building and updating. Ensure timely high data quality delivery from service providers for corporate archive. Being an active and highly supportive member of interdisciplinary reservoir management team.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience &amp; Skills Minimum 10 years of work experience in the oil and gas industry with 6 years' experience doing a combination of petrophysical studies and operations.</li><li>Experience with a focus on acquiring, evaluating, and interpreting petrophysical data. This includes advanced logging techniques and the ability to define hydrocarbon contacts and assess reservoir potential accurately.</li><li>Must have a thorough understanding of open hole (both wireline and MWD/LWD), cased hole and production logging tools.</li><li>Must be able to evaluate and interpret image logs.</li><li>Enhance reservoir characterization through the integration of various data sets, including petrophysical, geological, and dynamic data to reduce uncertainties in reservoir simulations.</li><li>Strong competency in quality control of petrophysical data, ensuring reliability and accuracy in routine and complex log analysis.</li><li>Experience in deploying new petrophysical technologies and methodologies to optimize field development and asset value.</li><li>Strong teamwork skills.</li><li>Experience working in a multicultural environment.</li><li>Effectively communicate with peers, less experienced staff, field staff, and management.</li></ul><p>Desirable</p><ul><li>Ability to guide and improve the processes related to petrophysical data acquisition and interpretation, ensuring the application of industry best practices and the incorporation of innovative approaches to subsurface characterization.</li><li>Experience of CCAL and SCAL evaluation techniques</li><li>Experience working in an integrated asset team environment.</li><li>Knowledge of geostatistics and experience aiding geoscientists to build 3D geological and property models (deterministic and stochastic)</li><li>Experience of horizontal well technology and geo-steering.</li><li>Experience in carbonate reservoirs.</li><li>Experience in statistical and pattern recognition (Neural networks, fuzzy logic and multidimensional histograms) techniques</li></ul><p>Software Knowledge</p><ul><li>Experience IP / Techlog / Geolog</li><li>Petroworks - Openworks - Zmap+</li><li>Petrel / RMS is added advantage</li><li>Emeraude Kappa</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Description</strong><br> <strong>HSE Supervisor</strong><br><strong>Location:</strong>&nbsp;Mesaieed, Qatar<br><strong>Start Date:</strong>&nbsp;First Half of September 2026<br><strong>Contract Duration</strong>: 6 months only<br> <strong>Position Summary</strong><br> We are seeking an experienced <strong>HSE Supervisor</strong> to support site operations and ensure compliance with Health, Safety, and Environment (HSE) requirements during the execution of industrial construction, maintenance, and installation activities. The successful candidate will be responsible for monitoring site safety performance, enforcing HSE standards, supporting supervisors and contractors, and promoting a strong safety culture across the workforce. <strong>Key Responsibilities</strong><br> <strong>Site HSE Supervision</strong><ul><li>Monitor day-to-day site activities to ensure compliance with HSE procedures, standards, and applicable regulations.</li><li>Conduct routine site inspections, safety observations, and compliance checks.</li><li>Identify unsafe acts and unsafe conditions and ensure corrective actions are implemented.</li><li>Promote a proactive safety culture through regular workforce engagement and coaching.</li><li>Support implementation of site HSE plans, procedures, and programs.</li></ul><strong>Workforce Safety Management</strong><ul><li>Conduct daily toolbox talks and safety briefings.</li><li>Ensure personnel understand job hazards and required control measures before commencing work.</li><li>Verify the proper use of Personal Protective Equipment (PPE).</li><li>Monitor compliance with safe work procedures and permit-to-work requirements.</li><li>Encourage reporting of hazards, near misses, and unsafe conditions.</li></ul><strong>Permit-to-Work &amp; Risk Management</strong><ul><li>Verify work permits are properly authorized before work begins.</li><li>Ensure Job Safety Analyses (JSA), Risk Assessments, and Method Statements are available and followed.</li><li>Monitor high-risk activities and ensure required control measures are maintained.</li><li>Ensure compliance with emergency preparedness and response procedures.</li></ul><strong>Contractor HSE Monitoring</strong><ul><li>Monitor contractor compliance with site HSE requirements.</li><li>Participate in coordination and safety meetings.</li><li>Support contractors in addressing HSE concerns and improving safety performance.</li><li>Report serious or repeated HSE violations to site management.</li><li>Follow up on corrective and preventive actions to ensure timely closure.</li></ul><strong>Incident Prevention &amp; Investigation</strong><ul><li>Participate in incident, accident, and near-miss investigations.</li><li>Assist in identifying root causes and developing corrective actions.</li><li>Monitor implementation of recommendations arising from investigations.</li><li>Maintain records of incidents and corrective actions.</li></ul><strong>Reporting &amp; Documentation</strong><ul><li>Maintain HSE inspection, audit, and observation records.</li><li>Prepare daily, weekly, and monthly HSE reports as required.</li><li>Track safety performance metrics and communicate findings to site management.</li><li>Support internal and external HSE audits.</li></ul><strong>Scope of Work</strong><br> The HSE Supervisor will support activities including:<ul><li>Minor Civil Works</li><li>Structural Steel Dismantling, Modification, and Erection</li><li>Dismantling of Existing Mechanical Equipment</li><li>Installation of New Mechanical Equipment</li><li>Piping Dismantling and Installation (Compressed Air and Hydraulic Systems)</li><li>Ducting and Small Platework Activities</li></ul><strong>Qualifications &amp; Experience</strong><ul><li>Diploma or Degree in Occupational Health &amp; Safety, Engineering, or a related discipline.</li><li>NEBOSH IGC, IOSH, or equivalent HSE certification preferred.</li><li>Minimum 3 to 5 years of HSE experience within industrial construction, manufacturing, plant maintenance, or heavy engineering environments.</li><li>Experience supporting brownfield projects, shutdowns, maintenance activities, or industrial installations is preferred.</li><li>Strong knowledge of:<ul><li>Permit-to-Work Systems</li><li>Hazard Identification and Risk Assessment</li><li>Work at Height</li><li>Lifting Operations</li><li>Confined Space Entry</li><li>Hot Work Activities</li><li>Incident Reporting and Investigation</li><li>Emergency Response Procedures</li></ul></li></ul><strong>Key Competencies</strong><ul><li>Strong commitment to health, safety, and environmental standards</li><li>Effective communication and interpersonal skills</li><li>Good observation, auditing, and reporting abilities</li><li>Ability to influence and promote safe behaviors</li><li>Strong problem-solving and decision-making skills</li><li>Team-oriented with the ability to work in a multicultural environment</li><li>Proactive approach to risk identification and mitigation</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

Summary<br><br>The Room Attendant, reporting directly to the POSITION, is responsible for maintaining the cleanliness, sanitation, and appearance of guest rooms and public areas in the hotel. They ensure a welcoming and pleasant environment for all guests by providing exceptional service and attention to detail.<br><br>Key Responsibilities<br><br>Clean and tidy guest rooms, including changing bed linens, making beds, dusting, vacuuming, mopping, and cleaning bathrooms as per company and brand standards. Replenish guest amenities and supplies such as towels, toiletries, and drinking glasses. Remove trash, dirty linens, and room service items from guest rooms. Clean and disinfect sinks, toilets, showers, bathtubs, and bathroom floors. Restock bathroom supplies such as soap, shampoo, tissue, and towels. Respond to guest requests promptly and with courtesy, ensuring guest satisfaction. Report any lost and found items to the Housekeeping Supervisor or Front Desk immediately. Report any maintenance or repair issues such as broken furniture, fixtures, or lighting. Ensure housekeeping carts are stocked with supplies and linens at the beginning and end of each shift. Maintain proper storage and use of cleaning products, ensuring compliance with safety standards. Cleaning public areas of the hotel, including hallways, elevators, lobbies and other front and back of house areas. Follow hotel policies and procedures regarding health, safety, and cleanliness standards. Adhere to regulations and procedures for the use and storage of cleaning chemicals. Report all missing items from room (e.g. Irons/hair dryers, etc.) to the senior Housekeeping team. Handles items for ‘lost and found’ according to the hotel policies. Is responsible for following the SOPs. Ensures 100% compliance with all mandatory training <br><br>Experience, Certification & Education<br><br>High school Certificate required. Two years’ experience in same job role. Ability to work independently and as part of a team. Good communication and customer service skills.<br><br>Skills: Flexibility, Teamwork, Detail Oriented, Reliability, Friendliness, Passionate

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking to meet and hire talented professionals from South America for exciting upcoming opportunities to support our operations in Qatar. Register your interest today for a chance to join our diverse community of experts.</p><p>Perform the field operation of assigned facilities/units relevant to your experience which could be Utility, Inlet Receiving, Sulphur Recovery and LNG, by monitoring performance and condition of equipment and maintaining the processes within operable limits as defined in standard procedures and instructions to achieve safe and reliable plant operation.</p><p>Maintain the competency of all operational procedures and practices through on-the-job training and job rotation to ensure readiness and capability to assume the operator role. Operate field equipment in accordance with operating and approved safety procedures to ensure effective process flows and optimum operational status of equipment. Monitor and log all operating parameters ensuring that all irregularities are reported to immediate supervisor for advice and/or resolution. Prepare field equipment in allocated work area for maintenance activities and follow-up execution and recommission equipment upon satisfactory completion of work. Ensure all Permit to Work requirements and expectations throughout Permit to Work issuance in the field and during PTW field audits.</p><p>Monitor all personnel and activities on site using, but limited to, unit surveillance, regular safety walks, audits and Observation Cards to ensure site safety and operational effectiveness. Provide immediate first-line response capability in the event of emergencies or major incidents to eliminate or limit potential loss or damage to Company personnel, assets or the environment. Ensure incoming shift operator is fully briefed on current operating status and significant events during previous shift to ensure seamless hand-over of responsibilities. Collect all regular and special samples correctly as per schedule and direction of shift supervisor. Perform electrical isolation and de-isolation work of low voltage electrical equipment in preparation of equipment for maintenance activities in line with approved procedure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Completion of Secondary School Education (12 years) and a Vocational Training Programme Certificate.</p><p>5 years operator experience within Utility, Inlet Receiving, Sulphur Recovery or LNG facility.</p><p></p></section>

<p><strong>MISSION:</strong> Coordinate and control the work of the dependent team based on piping Scope of Work assigned Distribute the equipment to allow the team to perform the assigned activities</p><p><strong>TASKS:</strong> Ensure that operators and all personnel belonging to the team strictly observe applicable safety standards Ensure that the works are carried out in accordance with the project quality requirements Analyse the drawings receiv ed from the works supervisor and give instructions to the team in order to execute the works in accordance Coordinate and check the work carried out by the team, reporting any difficulties to the works supervisor Organise al l the means, equipment and materials necessary to perform the work. Check that they comply with applicable provisions, report any anomalies and coordinate any corrective actions Liaise with the works supervisor in order to optimize the use of equipment and personnel Carry out the daily toolbox talkings Ensure adherence to the planned time frame Ensure that any approved modification made during the execution of the works is duly marked-up on the relevant drawings, in order to allow the issue of As Built documentation Provide the works supervisor with data on quantities produced and/or installed for updating Progress Reports and quantities accounting Provide the work supervisor with data on manpower, equipment, tools and material used Implement the permit-to-work system Liaise with other disciplines on ongoing operations Ensure housekeeping of the work location</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School/Secondary</li><li>10-15 years as a Pipefitter Foreman within Oil &amp; Gas</li><li>English Language skills required</li><li>Experience in position 10 to 15 years</li><li>Experience with welding application 3-5 years and above</li><li>Knowledge of Manual SMAW/FCAW welding process</li><li>Knowledge of Cutting and trimming applications (cold and hot cutting)</li><li>Knowledge of Oxyacetilen cutting, Plasma cutting aplication</li><li>Knowledge of Milling, turner, lathe machine application</li><li>Knowledge of Drilling application</li><li>Work experience with the following Isometric, Bevel designs, Fittings Torquering Steel fabrication and erection Lifting and rigging operations Installation and assembly</li><li>Work experience with the follwing materials Carbon steel flowline Clad Iconel 625/825 Stainless steel 314L, 316L</li><li>Experience proven on pipeline scope onshore and offshore</li><li>Experience proven for Heavy Fabrication yards, Refinery, Power Plant</li><li>Experience proven for shipyards, offshore Jacket Installation, Wind Farm Installation,</li><li>Experience proven for Deck, Conductors, Pilling, Boat Landing installation</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Workshop Supervisor (Mechanical) will be responsible for leading and coordinating all mechanical workshop maintenance activities to ensure the safe, reliable, and efficient operation of plant equipment. The role involves supervising a multidisciplinary team of welders, fabricators, machinists, and valve technicians while ensuring compliance with company HSE, quality, and maintenance standards.</p><p>Key Responsibilities:</p><ul><li>Supervise daily workshop operations and provide technical guidance to mechanical maintenance personnel.</li><li>Lead teams of welders, fabricators, machinists, and valve technicians to ensure work is completed safely, efficiently, and to the required quality standards.</li><li>Coordinate preventive, corrective, and breakdown maintenance activities for workshop equipment.</li><li>Oversee the inspection, testing, troubleshooting, repair, and overhaul of PRVs/PSVs, mechanical valves, rupture discs, and related equipment.</li><li>Support plant shutdowns (SD) and turnarounds (TA) by planning and executing workshop maintenance activities.</li><li>Ensure compliance with HSE requirements, toolbox talks, Job Safety Analysis (JSA), Permit to Work (PTW), and QA/QC procedures.</li><li>Utilize SAP PM to manage work orders, maintenance schedules, and equipment records.</li><li>Coordinate with Operations, Maintenance, Reliability, Planning, QA/QC, and contractors to ensure timely execution of maintenance work.</li><li>Manage workshop tools, equipment, calibration records, and tool crib activities.</li><li>Review technical drawings, P&amp;IDs, isometric drawings, maintenance procedures, and repair scopes.</li><li>Support procurement by preparing technical specifications and evaluating materials, spare parts, and vendor proposals.</li><li>Coach, mentor, and develop workshop personnel while ensuring competency and training requirements are maintained.</li><li>Prepare maintenance reports, monitor KPIs, and contribute to continuous improvement initiatives to enhance equipment reliability and workshop performance.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>5-7+ years of experience in Petrochemical, Refinery, LNG, or Oil &amp; Gas processing industries.</li><li>Proven experience supervising mechanical workshop operations and multidisciplinary maintenance teams.</li><li>Strong technical expertise in PRV/PSV overhaul, valve repair and testing, rupture discs, welding &amp; fabrication, machining, static equipment, and piping maintenance.</li><li>Hands-on experience with preventive, corrective, and shutdown/turnaround maintenance activities.</li><li>Working knowledge of SAP PM, P&amp;IDs, isometric drawings, hydro testing, pneumatic testing, and maintenance best practices.</li><li>Familiarity with HSE standards, Permit to Work (PTW), Job Safety Analysis (JSA), and QA/QC procedures.</li><li>Strong leadership, communication, planning, and problem-solving skills with the ability to manage contractors and workshop personnel effectively.</li><li>Experience working in a multicultural industrial environment with a strong focus on safety, quality, and operational excellence.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Responsibilities</b></p><p><br></p><p>Implements innovative solutions, technology advances, and methods to effectively deal with working out of sequence.&nbsp;&nbsp;</p><p>Supports Lead Engineer in monitoring quality activities and takes action where required.&nbsp;</p><p>Assist Project Team in project documentation such as proposals, estimates, budgets and schedules.</p><p>Manage process design and any design changes within budget and schedule.&nbsp;</p><p>Prepare and participate in weekly process discipline meetings, prepare progress reports and follow required checking procedures.</p><p>Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc.&nbsp;&nbsp;</p><p>Creates final documentation incorporating all relevant information and pursues customer approval.&nbsp;</p><p>Reviews documentation to assist others and reviews/authorizes work done by direct reports.&nbsp;</p><p>Evaluate new technology advancements against existing design standards and revise where applicable.&nbsp;</p><p>Identify and review new technology development which could be applicable in providing more cost-effective facilities.&nbsp;</p><p>Perform discipline specific engineering services such as:&nbsp;</p><p>Identify and report changes to project scope;&nbsp;</p><p>Contribute to appropriate studies, analyses and recommend actions;&nbsp;</p><p>Assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports;&nbsp;</p><p>Provide assistance during procurement, construction and commissioning activities.&nbsp;</p><p>Quality Assurance:</p><p><br></p><p>Responsible for working within the provisions and guidelines of the Quality Assurance systems.</p><p>Safety:</p><p><br></p><p>Responsible for personal safety safe working practices. Understand and follow OH&amp;S procedures.</p><p>Promoting health, safety and environmental awareness.</p><p>Industry Specific Experience:&nbsp;</p><p><br></p><p>Must have process design in onshore/offshore oil &amp; gas industry in a brownfield environment with focus on rotating equipments.&nbsp;</p><p>FEED and detailed engineering experience essential.&nbsp;</p><p>Decent experience in an engineering consultancy in a multidiscipline environment is essential.&nbsp;</p><p>Education – Qualifications, Accreditation, Training:</p><p><br></p><p>Full-Time Bachelor’s Degree in Chemical Engineering from an accredited university.</p><p>MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period.</p><p>Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage&nbsp;</p><p>IT Skills:&nbsp;</p><p><br></p><p>Simulations&nbsp;</p><p><br></p><p>Aspen suite, Hysys, Pipesys, FlareNet</p><p>PRO-II&nbsp;</p><p>Flow Assurance&nbsp;</p><p><br></p><p>PipeNet&nbsp;</p><p>Pipesim&nbsp;</p><p>PVTSim/OLGA&nbsp;</p><p>PipePhase&nbsp;</p><p>TLNET&nbsp;</p><p>Fathom</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-44198&nbsp;&nbsp; <br> <br> Area activity <p>Technical Facilities Management</p><br><br>Position description Job title <p>QA/QC Engineer M/F</p><br><br> Contract type <p>Temporary work contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>24 months</p><br><br> Job description <br><p>We currently have an opportunity within SPIE Global Services Energy, Qatar for a :&nbsp; &nbsp;QA/QC Engineer</p><br><br><p>Job Purpose</p><br><br><p>The QA/QC Engineer [CAT III projects] is quality focal point, interfacing with the EPC Contractor, COMPANY project stakeholders and any associated Sub-Contractors, to ensure QA/QC compliance within the project execution phases, and up to the final handover.<br>This role is responsible for quality assurance and quality control, during detail engineering, procurement, and construction project phases, review of several EPC deliverables, including coordination of third-party source-inspection activities. Reporting functionally to the COMPANY PMT and directly to, the Head of Projects QA/QC and provides ongoing leadership and support to ensure project’s compliance.</p><br><br><br><p>Key Job Accountabilities</p><br><br><ul><li>Understand and promote the COMPANY QA/QC requirements and compliance expectations.</li><li>Support the interface relationships between applicable project stakeholders.</li><li>Establish and support proactive and collaborative working relationships with EPC contractors and applicable third-party organisations.<br>Review the project scope of work, to determine the nature, extent and frequency of quality verification activities.</li><li>Lead and participate in assigned quality verification activities.<br>Coordinate the project quality team meetings and report project QA/QC metrics to the PMT and the Lead QA/QC Engineer (CAT III Projects and Quality Assurance).</li><li>Review contractor/ supplier quality deliverables for conformance to QELNG quality requirements and expectations (i.e., PQP, PEP, ITP, WPS, WQT, Criticality Rating Assessments and other QA/QC procedures)<br>Chair Pre-Inspection Meetings to ensure that the quality requirements and expectations are fully understood and implemented prior to commencement of work activities</li><li>Coordinate site (Onshore / Offshore) and workshop inspection activities and assign adequate COMPANY inspection resources to effectively measure conformance to requirements.</li><li>In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i. e. procedures, specifications, detailed methodologies, etc.)</li></ul> <br> Profile <br><p>Bachelor's degree in engineering discipline (Mechanical) with demonstrated knowledge and experience.<br>•&nbsp;Certified CSWIP 3.1 Welding Inspector or equivalent.<br>•&nbsp;Non-Destructive Testing (NDT) Level II certification is required, with valid certifications in RT, MPT, DPT, and UT methods.</p><br><br><p>•&nbsp;ISO 9001: 2015 internal / lead auditor (IRCA or an equivalent) trained or certified, with a broad experience in QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation)<br>•&nbsp;Current valid TBOSIET, H2S and Breathing Apparatus certifications (OPITO Approved), as applicable with an offshore medical certificate</p><br><br><p>As a minimum of 10 years demonstrated experience in the oil and gas industry, with particular focus on offshore brownfield and greenfield projects, and in-service modifications to existing LNG facilities together with maintenance and shutdown activities.<br>•&nbsp;At least 5 years of experience &amp; familiarity with various manufacturers of large bore SDVs &amp; MOVs, including actuators, gearboxes and their applicable certifications and specifications.<br>•&nbsp;Shall be competent in the design, construction and inspection aspects of MOVs and SDVs including functional test of valve actuators.<br>•&nbsp;Must have experience in manufacturing, inspection, and testing of various types of Double Block and Bleed valves (DBB).<br>•&nbsp;Should be knowledgeable about the various types of valve testing, including shell tests, seat tests, and back seat tests.<br>•&nbsp;Experience in reviewing Inspection and Test Plans (ITPs) for valves and other QA/QC procedures, including pressure test procedures, NDE procedures, and functional test procedures.<br>•&nbsp;Experience in the Source Inspection of MOVs, SDVs, DBBs, valve actuators with gearbox. In addition to hands on knowledge in Source Inspection Management Program.<br>•&nbsp;Demonstrated experience on offshore brownfield projects and in service modifications to existing offshore facilities including MOVs and SDVs overhauling, reinstatement and testing.<br>•&nbsp;Knowledgeable on the applicable codes &amp; standards related to Valve manufacturing and testing requirements (API 6D, API 6DX, API 598, etc.)<br>•&nbsp;Familiar with the welding and construction codes, including ASME B31.3, AWS D1.1, and ASME Section IX.<br>•&nbsp;Should as a minimum be conversant with all relevant NDT techniques and as a minimum, holding Level II in visual (VT), magnetic particle (MP), dye penetrant (DP), radiographic and ultrasonic testing (UT) is mandatory.<br>•&nbsp;Experience and knowledge of mechanical, welding, structural, electrical and instrumentation QA/QC processes and techniques.<br>•&nbsp;Experience in reviewing painting procedures and conducting painting and coating inspections.<br>•&nbsp;Experience in conducting internal and external audits.<br>•&nbsp;Familiar with quality assurance principles and practices.<br>•&nbsp;Should have a proven history in a senior QA/QC engineering role, within demanding projects<br></p><br><br> <br>Working at SPIE What can we offer you? <br><p>We offer long-term contract with attractive daily rate, insurance coverage, transportation &amp; expat standard accommodation</p><br><br><br> <br>Position location Location <br> Raslaffan <br>Candidate criteria Minimum level of experience required <p>10 years or more</p><br><br> Required authorisations <br><p>PMD CAT-III - MOV/SDV Valves Overhaling Project (P-1387 EPC) -One (1) QA/QC Engineer.</p><br><br> <br> Languages <p>English (C-Professional working proficiency)</p><br><br>Our ambition Combining our differences <br><p>SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities.</p><br><br> <br> <br><br> </div>

<p>JOB PURPOSE / OBJECTIVE Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability. KEY ACCOUNTABILITIES Scaffolding Activities • Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA). • Review scaffold design drawings and ensure proper load capacity and tagging system. • Conduct inspections and certify scaffolds prior to use. • Ensure scaffolding supports maintenance, turnaround (TA), and project requirements. Insulation Works • Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment. • Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements. • Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI). • Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency. Painting & Coating • Supervise surface preparation (blasting, cleaning) and coating applications. • Ensure proper application of protective coatings for corrosion control. • Verify paint systems per company and international standards (e.g., SSPC, NACE). • Monitor environmental conditions (humidity, temperature, dew point). Maintenance & Turnaround Support • Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities. • Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work. Team Leadership • Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities. • Ensure workforce competency and productivity with company standards, procedures, and safety requirements. • Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability. Policies, Systems, Processes and Procedures • Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. • Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements. • Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment • Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, • Enforce company Safety Procedures, Permit to Work (PTW), and LT&T systems. • Conduct toolbox talks and job safety analysis (JSA). • Ensure all SIP activities comply with Company regulations and site policies. • Identify hazards and implement mitigation measures. • Perform routine inspections and audits of SIP work. • Ensure documentation, reports, and checklists are completed accurately. • Verify contractor performance and adherence to specifications. Reporting • Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards. • Report incidents and near misses. Perform investigations, determine root cause and assign necessary action items. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Mechanical Engineering or equivalent Technical field. Experience • Required: 5-7 years in petrochemical or oil & gas industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Relevant certifications in scaffolding (e.g., CISRS or equivalent) • Coating/painting certification (e.g., NACE Level 1 or higher preferred)</p>

<p>JOB PURPOSE / OBJECTIVE Provide advanced technical expertise, supervision, and quality control for all scaffolding, insulation, and painting (SIP) activities across company facilities. Ensure safe execution, compliance with international standards, and support maintenance, shutdowns, and project activities to maintain plant integrity and reliability. KEY ACCOUNTABILITIES Scaffolding Activities • Supervise erection, modification, and dismantling of scaffolds in accordance with company HSE standards and international codes (e.g., BS EN, OSHA). • Review scaffold design drawings and ensure proper load capacity and tagging system. • Conduct inspections and certify scaffolds prior to use. • Ensure scaffolding supports maintenance, turnaround (TA), and project requirements. Insulation Works • Monitor installation and removal of thermal and cold insulation systems for piping, vessels, and equipment. • Ensure correct material selection (e.g., mineral wool, calcium silicate, PIR) in accordance with approved specifications and service requirements. • Verify compliance with specifications to prevent heat loss, condensation, and corrosion under insulation (CUI). • Coordinate insulation reinstatement post-maintenance to restore system integrity and operational efficiency. Painting & Coating • Supervise surface preparation (blasting, cleaning) and coating applications. • Ensure proper application of protective coatings for corrosion control. • Verify paint systems per company and international standards (e.g., SSPC, NACE). • Monitor environmental conditions (humidity, temperature, dew point). Maintenance & Turnaround Support • Support maintenance and turnaround activities by coordinating SIP works during plant shutdowns and turnaround periods. Ensure timely execution to avoid delays in critical path activities. • Liaise with maintenance, operations, and contractors’ teams to ensure safe, timely, and coordinated execution of work. Team Leadership • Guide and mentor technicians and contractors to ensure safe and efficient execution of scaffolding, insulation, and painting activities. • Ensure workforce competency and productivity with company standards, procedures, and safety requirements. • Plan, coordinate, and prioritize daily maintenance activities to meet operational schedules and maintain continuous plant reliability. Policies, Systems, Processes and Procedures • Contribute to the identification of opportunities for the continuous improvement of Departmental systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency. • Provide critical input to support the development of Section’s systems, policies, processes, and procedures in order to meet business requirements. • Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Security, Safety and Environment • Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, • Enforce company Safety Procedures, Permit to Work (PTW), and LT&T systems. • Conduct toolbox talks and job safety analysis (JSA). • Ensure all SIP activities comply with Company regulations and site policies. • Identify hazards and implement mitigation measures. • Perform routine inspections and audits of SIP work. • Ensure documentation, reports, and checklists are completed accurately. • Verify contractor performance and adherence to specifications. Reporting • Prepare and submit Daily Shift Reports in a timely and accurate manner in order to meet the Departmental requirements, policies and standards. • Report incidents and near misses. Perform investigations, determine root cause and assign necessary action items. Qatarization • Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.</p><p>QUALIFICATIONS & EXPERIENCE Education • Required: Diploma in Mechanical Engineering or equivalent Technical field. Experience • Required: 5-7 years in petrochemical or oil & gas industry. • Preferred: Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational Accreditations • Relevant certifications in scaffolding (e.g., CISRS or equivalent) • Coating/painting certification (e.g., NACE Level 1 or higher preferred)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Commissions the preparation and the implementation of necessary operational security software updates, firewall installation, hardware additions, and any authorized technical changes related to the security functions to ensure compliance both with internal security policies etc. and applicable laws and regulations required security levels.</p><p>Design and manage processes for detection, investigation, correction, and/or prosecution of operational security breaches, violations, and incidents.</p><p>Benchmark, analyze report on, and make recommendations for the improvement of Operational Technology (OT) security infrastructure.</p><p>Works with management to ensure that as new equipment, facilities, services, and systems are installed that the OT security issues are addressed.</p><p>Typically, a background in technical Operational Technology (OT) roles such as architecture, security program development or operations, with a clear and abiding interest in operational security.</p><p>Liaison with and offers technical direction to related operational security governance functions (such as Physical Security/Facilities, Risk Management, Legal and Compliance) plus senior and middle managers throughout the organization as necessary, on information security matters such as routine security activities plus emerging security risks and control technologies.</p><p>Plan, implement and upgrade security measures and controls.</p><p>Protect digital files and operational security systems against unauthorized access, modification, or destruction.</p><p>Maintain data and monitor/review security access authorizations.</p><p>Manage network, intrusion detection and prevention systems.</p><p>Work out on the security tools such as security asset inventory management and risk management reporting to security information and event management system (SIEM).</p><p>Define, implement, and maintain corporate security manuals, policies, procedures &amp; instructions.</p><p>Coordinate further security plans, awareness received from vendors and take required actions.</p><p>Security assessments of network infrastructure, hosts and applications.</p><p>Work out on ICS security related audit findings and maintain corrective actions.</p><p>Download, validate and apply the latest Antivirus DAT file to AV server and ensure published to all ICS machines by continuously monitor the AV server dashboard.</p><p>Asset identification, monitoring and analysis using supportive tools (IPS, firewall log, system events and antivirus reports.</p><p>ICS Firewall Events log, DNS, Router, and switches Events log analysis.</p><p>Validation and deployment of firmware and software updates, deactivate of unnecessary software's or access.</p><p>Define and implement backup schedule for all ICS assets, System configuration backups, Machines image backups, Router and switches backups, FW backups.</p><p>Manage User accounts ICS, network, and security equipment.</p><p>Support Project execution team to integrate new Operational Technology (OT) system in Plant security framework.</p><p>Work out on Audit findings and observations.</p><p>Work out with ICS modifications as requested.</p><p>Collect and archive system logs, events, change logs, failure events etc. To support audit and forensic analysis.</p><p>Ensure that all implementation activities are complied with published ICS policies, instructions, procedures,</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Bachelor's Degree</b> in Information security Technology, Computer Science or Electronic/Electrical Engineer. <br>Must be ICS certified from SANS, however following certificates will be great additional advantage for the candidate: - <br><br>GIAC GICSP (Global Industrial Cybersecurity Professional). <br>ISA CAP (Certified Automation Professional). <br>Cybersecurity for Automation, Control, and SCADA Systems (ISA-99/IEC-62443) - ISA <br>Advanced SCADA Security - Red Tiger/ any other vendor. <br>Industrial Cybersecurity for OPC - Matrikon/any other vendor. <br>OPC-UA Hands-on Training Level-3 - OPCTI. <br><br><br>3-5 years at least of field experience in OT Cybersecurity domain in Oil &amp; gas &amp; petrochemical industry. <br>Excellent knowledge of common IT/OT ICS specialization areas related to PLC's, DCS's, PDCS, Firewalls, networks, and switches. <br>Exposure of implementing IT/OT security policies and regulations. <br>Knowledge of international &amp; national standards frameworks such as ISA99, IEC62433, IEC61511, IEC62351, IEC62591 ISO27001, 27002, 27005 Compliance regulations. <br>Extensive knowledge of several ICS DCS/PDCS/PLC/ESD/Servers, routers, switches &amp; firewalls technologies within several OEM technologies such as, Siemens, HIMA, TRICONEX, HONEYWELL, GE, Allan Bradley, CISCO, MacAfee.</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span>Key Responsibilities:&nbsp;</span></p><br><ul><li><p>a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;}The Principal Safety Engineer provides leadership and assurance across all phases of engineering projects (concept, FEED, detailed design, and execution).</p><br></li><li><p>The role is responsible for driving the implementation of Company's and International HSE standards and best practices, ensuring that safety is fully integrated into engineering design and operational philosophy.</p><br></li><li><p>The position leads hazard identification and risk assessment studies (HAZID, HAZOP, LOPA, SIL), develops safety philosophies and engineering solutions, and supports quantitative risk assessments, fire and explosion analysis, and functional safety lifecycle activities.</p><br></li><li><p>The Principal Engineer works closely with multidisciplinary teams and clients to ensure regulatory compliance, risk reduction (ALARP), and required safety performance.</p><br></li><li><p>Additionally, the role acts as a technical authority, guiding junior engineers, reviewing deliverables, supporting audits and safety cases, and contributing to continuous improvement of HSE practices within the organization.</p><br></li></ul><p><span><strong><u>Quality Assurance</u></strong></span></p><br><p><span>Responsible for working within the provisions and guidelines of the Quality Assurance systems.</span></p><br><p><span><strong><u>Safety:</u></strong></span></p><br><p><span>Responsible for personal safety safe working practices. Understand and follow OH&amp;S procedures</span></p><br><p><span>Promoting health, safety and environmental awareness.</span></p><br><br> <b><strong>Education – Qualifications, Accreditation, Training</strong></b><span><span>:&nbsp;</span></span><ul><li>Bachelor’s degree in Chemical, Process, or Safety Engineering from an accredited University</li><li>Master’s degree in Safety Engineering, Process Safety, Risk Engineering, or equivalent (highly desirable)</li><li>Chartered Engineer status (e.g., CEng, PE) or equivalent professional registration (highly desirable)</li><li>Recognized certifications (preferred):<ul><li>NEBOSH Diploma (International)</li><li>TÜV Functional Safety Engineer (IEC 61508 / 61511)</li><li>IChemE / IMechE / IOSH Membership (MIOSH/CMIOSH)</li><li>Certified Safety Professional (CSP) or equivalent</li></ul></li></ul><b><strong>Industry Specific Experience:</strong></b><ul><li>Vast experience in HSE / Process Safety within the Oil &amp; Gas (upstream, midstream, downstream), petrochemicals, LNG</li><li>Proven experience in engineering design or EPC environment</li><li>Demonstrated leadership in major capital projects (FEED, EPC, brownfield modifications)</li><li>Experience working with international clients, regulators, and multi-disciplinary teams</li><li><p>Prior role as&nbsp;</p><br><p>Lead / Principal HSE Engineer on Projects</p><br></li></ul><p>a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;}</p><br><b><strong>Industry Technical Competencies required:</strong></b><ul><li>Extensive expertise in:<ul><li>Process Safety Management (PSM) frameworks (OSHA 29 CFR 1910.119, CCPS RBPS)</li><li>Hazard Identification &amp; Risk Assessment methodologies:<ul><li>HAZID, HAZOP, LOPA, SIL, Bowtie, QRA</li></ul></li><li>Consequence analysis and risk modeling:<ul><li>Vapor cloud explosion, dispersion, fire radiation (e.g., PHAST/Safeti knowledge)</li></ul></li><li>Functional Safety &amp; Instrumented Protection Systems:<ul><li>IEC 61508 / IEC 61511 lifecycle</li></ul></li><li>Fire &amp; Explosion Engineering:<ul><li>Passive/Active Fire Protection (PFP/AFP), FERA, EERA</li></ul></li><li>Loss Prevention philosophy and design safety principles</li></ul></li></ul><br><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Sr. Systems Analyst</strong><br> <strong>Location:</strong> Qatar<br> <strong>Role Overview:</strong><br> We are seeking an experienced <strong>Senior Systems Analyst</strong> to act as a focal point for business process support and system optimization. The role involves supporting end-users, enhancing SAP and related systems, and driving process improvements to ensure efficient project execution.<br> <strong>Key Responsibilities:</strong><ul><li>Provide <strong>first-line system support</strong> to engineering and project teams</li><li>Gather and translate <strong>business requirements</strong> into system solutions</li><li>Perform <strong>gap analysis, data analysis, and process optimization</strong></li><li>Liaise with ICT for system upgrades and enhancements</li><li>Coordinate <strong>UAT, data migration, and system implementation</strong></li><li>Develop reports, dashboards, and data models (Power BI, etc.)</li><li>Support workflow automation and business process improvements</li></ul><strong>Requirements:</strong><ul><li>Bachelor’s/Master’s in <strong>Business, IT, or related field</strong></li><li><strong>8+ years</strong> experience in business systems and data analysis</li><li>Strong experience in <strong>SAP (PS modules preferred)</strong></li><li>Expertise in <strong>data analysis, visualization, and reporting tools</strong></li><li>Knowledge of <strong>business process modelling &amp; workflow automation</strong></li><li>Strong analytical, problem-solving, and stakeholder management skills</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

Position: Drilling & Well Equipment Coordinator<br><br>Location: Qatar<br><br>Position Overview<br><br>We are seeking an experienced D&W Equipment Coordinator to support Completion and Well Intervention operations by ensuring the availability, integrity, certification, and timely mobilization of critical well intervention and completion equipment. This role plays a key part in coordinating warehouse activities, equipment logistics, quality assurance, inventory management, and operational readiness across offshore and onshore operations.<br><br>The successful candidate will be responsible for managing equipment throughout its lifecycle, from procurement acceptance and storage through deployment, maintenance, certification, return, and refurbishment, while upholding the highest standards of safety, operational excellence, and compliance.<br><br>Key Responsibilities<br><br>Equipment & Warehouse Coordination<br><br>Coordinate warehouse activities supporting Completion and Well Intervention operations. Prioritize equipment preparation, maintenance, and mobilization activities in line with drilling and intervention schedules. Manage inventory levels to ensure adequate stock of completion and intervention equipment and sub-assemblies. Track and monitor critical equipment to ensure accurate location visibility at all times. Prepare, inspect, and approve equipment for load-out to offshore installations and intervention operations. Coordinate equipment returns, inspections, repair requirements, and replacement activities.<br><br>Quality Assurance & Quality Control (QA/QC)<br><br>Conduct QA/QC acceptance inspections for all incoming equipment and materials. Verify equipment dimensions, specifications, threading, documentation, and compliance with manufacturer requirements. Review assembly documentation to ensure accuracy and completeness. Witness and perform spot-check inspections of assembly and pressure-testing activities conducted by vendors and service providers. Verify functionality and pressure integrity of critical completion equipment, including:Surface-Controlled Subsurface Safety Valves (SCSSSV) Hydraulic Control Modules (HCM) Ball Valves Additional completion and intervention equipment<br>Completion Equipment Assembly & Testing<br><br>Coordinate the makeup, assembly, testing, and readiness verification of completion sub-assemblies. Ensure assembly and testing activities are conducted in accordance with approved procedures and industry standards. Maintain sufficient stock levels of critical completion sub-assemblies to support planned operations. Monitor vendor performance and ensure quality standards are maintained throughout preparation and testing activities.<br><br>Logistics & Equipment Mobilization<br><br>Coordinate equipment movements between warehouses, offshore facilities, contractors, and service providers. Support mobilization and demobilization activities for drilling, completion, and intervention operations. Conduct pre-loadout inspections at contractor and vendor facilities. Ensure equipment transportation activities comply with operational and safety requirements. Coordinate material movements and equipment tracking within SAP and associated workflow systems.<br><br>Maintenance, Certification & Compliance<br><br>Ensure all service equipment remains maintained, calibrated, certified, and fit for purpose. Establish and maintain certification and testing programs for pressure control equipment (PCE) and intervention equipment. Coordinate inspection and testing activities including:Pressure Testing Magnetic Particle Inspection (MPI) Thread Inspection Equipment Certification Programs Maintain accurate certification records and ensure compliance with company, regulatory, and industry requirements.<br>Operational Support<br><br>Support platform, rig, and offshore intervention operations through effective equipment readiness and logistics coordination. Assist Well Intervention Supervisors by providing technical guidance and operational support. Maintain and continuously improve action tracking systems and equipment readiness programs. Ensure effective handover and communication between offshore and onshore teams regarding ongoing equipment-related activities.<br><br>SAP & Documentation Management<br><br>Process equipment movements and inventory transactions through SAP. Raise and manage relevant work orders, service orders, and equipment movement documentation. Maintain accurate records of equipment status, maintenance history, certification, and inventory levels. Ensure all operational documentation is completed and filed in accordance with company standards.<br><br>Qualifications & Experience<br><br>Degree or Diploma in:Mechanical Engineering Maintenance Engineering Mechanical Maintenance Technology A related technical discipline Minimum 10 years of experience within the oil and gas industry. At least 3 years of offshore operational exposure. Proven experience supporting Completion and Well Intervention operations. Strong background in equipment management, warehouse operations, logistics coordination, and QA/QC processes. Extensive knowledge of:Completion equipment Well Intervention equipment Slickline operations and associated equipment Pressure Control Equipment (PCE) Equipment certification and testing requirements SAP material management and equipment tracking processes Inventory control and logistics coordination QA/QC inspection standards and practices IWCF Level 2 certification preferred. Additional HSE, Well Intervention, QA/QC, or equipment inspection certifications are considered an advantage.

Job Summary<br><br>The Senior QA/QC Engineer is responsible for leading and overseeing Quality Assurance and Quality Control activities across the fertilizer complex to ensure that plant assets, materials, equipment, and construction activities comply with applicable international standards, company specifications, and regulatory requirements throughout their lifecycle. The role provides technical assurance for procurement, fabrication, welding, construction, inspection, testing, and material quality, while promoting a proactive "Quality at Source" culture to enhance asset reliability, mechanical integrity, and process safety.<br><br>The position also maintains compliance with ISO/IEC 17020 requirements by implementing and continually improving the Inspection Body Management System, supporting accreditation, and ensuring effective quality management practices across the Asset Integrity function.<br><br>Key Accountabilities<br><br>Lead and manage Quality Assurance and Quality Control (QA/QC) activities across all QAFCO plants and facilities to ensure compliance with company specifications, international standards, and statutory requirements. Ensure quality assurance throughout the asset lifecycle by participating in vendor qualification, reviewing Inspection and Test Plans (ITPs), quality documentation, manufacturing procedures, and witnessing shop and site inspections. Manage the qualification of vendors in co-operation with different stake holders like Material management , Mechanical, Electrical , Instrumentation sections etc. Oversee QA/QC activities for fabrication, construction, installation, repairs, and maintenance of static equipment and piping, ensuring compliance with approved procedures, codes, standards, and contractual requirements. Manage welding quality assurance by verifying Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), welder qualifications, and non-destructive examination (NDE) requirements for fabrication and repair activities. Review and approve welding book submitted by contractors. Coordinate and perform inspections with third-party inspection agencies, contractors, and vendors, including factory acceptance tests (FAT), site inspections according to ITP steps and lifting equipment certification. Ensure effective quality control of incoming materials, equipment, and spare parts by reviewing material certificates, verifying compliance with specifications, maintaining material traceability, and reporting non-conformities. Expertise needed to take decisions, if any deviations from the specification and Mock test requirement, etc. Monitor the repair and integrity of pressure equipment, piping, and static equipment in accordance with applicable codes and standards, including ASME PCC-2, to restore and maintain mechanical integrity. Manage inspection, testing, certification, and performance evaluation of pressure relief devices, and develop optimized inspection scopes using Risk-Based Inspection (RBI) methodologies. Maintain compliance with statutory and regulatory requirements, including Radiation Protection licensing and other applicable Ministry requirements. Maintain, calibrate, and control inspection instruments, tools, and equipment to ensure their accuracy, availability, and compliance with quality requirements. Develop, maintain, and continuously improve QA/QC procedures, inspection documentation, records, and electronic management systems to support effective asset integrity management. Implement, maintain, and continuously improve the ISO/IEC 17020 Inspection Body Management System, support accreditation activities, conduct internal audits, and ensure effective implementation of all applicable ISO/IEC 17020 requirements. Collaborate with Operations, Maintenance, Projects, Procurement, Supply Chain, and Asset Integrity teams to promote a "Quality at Source" culture, enhance process safety and mechanical integrity, and drive continuous improvement initiatives. Provide technical expertise in materials engineering, selection, corrosion, welding, inspection techniques, and damage mechanisms, while supporting engineering studies, troubleshooting, and quality improvement initiatives. Shall be able to review metallography and preparation of replica. Participate in Root Cause Analysis for the failures. Train, mentor, and develop inspection personnel and trainees through on-the-job coaching, knowledge sharing, and technical guidance to strengthen organizational competency. Ensure full compliance with QAFCO Occupational Health, Safety, Environment and Quality (OHSEQ) requirements, company policies, and all applicable regulatory and process safety standards.<br><br>Desired Candidate Profile<br><br>Bachelor’s degree in engineering in Mechanical/Metallurgy, graduated from a recognized university. Minimum of 10 - 15 years’ relevant functional experience within the Fertilizer, Petrochemicals or Oil & Gas Industry. Possess relevant professional certification such as ASME Authorized inspector Welding Inspection Cert. (CSWIP 3.2, AWS, or equivalent), etc. API 510, 570, API 653, API580 Inservice