Engineering Jobs in Egypt

About the job<br>Very Important:✅ FE (Passed the Fundamentals of Engineering exam) is a preferred requirement.<br>Company Description:DOTec Corp. is a professional engineering company founded in 1991 by Dr. Al Gonzalez Artigas. With licenses in 50 states in the U. S., DOTec Corp. specializes in Civil, Structural, Industrial, Mechanical, Electrical, Chemical, and Forensic Engineering. The company has extensive expertise in delivering innovative and sustainable engineering solutions for residential, commercial, and infrastructure projects.<br>Job Title: Land Development Civil Engineer (Remote) Experience: 2–6 years Location: Egypt Job Type: Full-time<br>Role Description:The Land Development Civil Engineer is responsible for the planning, design, and permitting of land development and site infrastructure projects. The role involves preparing detailed grading, drainage, and erosion control plans, as well as site improvement layouts including parking lots, access drives, and utility networks. This position also focuses on stormwater management system design, including detention and retention ponds, swales, culverts, and storm inlets, with calculations and modeling based on local and state storm event criteria such as FDOT (Florida Department of Transportation), INDOT (Indiana Department of Transportation), and other applicable municipal standards across the United States.<br>Key Responsibilities:Prepare land development plans, grading plans, and drainage and stormwater management reports. Perform stormwater modeling and hydraulic/hydrologic calculations for various design storm events in compliance with FDOT, INDOT, and local drainage manuals. Design and model water, sewer, and stormwater utility systems using Civil 3D and related software. Develop erosion and sediment control plans and ensure compliance with NPDES and local permitting requirements. Prepare technical reports, construction drawings, and cost estimates for review and approval. Coordinate with surveyors, planners, and permitting agencies throughout project development. Provide construction phase support including responses to RFIs and field design adjustment<br>Qualifications:يشترط أن يكون خريج جامعة حكومية2–6 years of experience in civil engineering design or project execution Strong drafting skills for civil or structural systems Very good proficiency in Civil 3D – Auto CADBachelor’s degree in civil engineering Examples of previous project work are required Very good command of English (written and spoken) Strong analytical and problem-solving skills Ability to work independently and remotely Excellent written and verbal communication skills Knowledge of national standards and codes Familiarity with value engineering and permit processes is a plus Familiarity with American codes is a plus

We are looking for a Solar Site Engineer for a well-known renewable energy company.<br>Key Responsibilities:1- Site Supervision: Supervise crew members, monitor daily installation processes, and ensure adherence to safety and quality standards on-site.2- Timeline & Resource Tracking: Assist in preparing and tracking project timelines, milestones, and material usage on site.3- Site Coordination: Coordinate between site requirements, installation teams, and project timelines to ensure smooth execution.4- Technical Support: Assist in utility interconnection processes, electrical inspections, and technical site meetings.5- Stakeholder Interaction: Maintain effective communication with contractors, consultants, and technical teams on site.<br>Job Requirements:-Education: Bachelor’s degree in Electrical Engineering or a relevant field.-Experience: 1 to 3 years of total experience, with a minimum of 1 year specifically in solar energy projects (On-grid, Off-grid, Hybrid, or Solar Pumping).-Location: Residence in Giza (or nearby areas).-Technical Skills: Good understanding of PV system installations, components, and regulatory codes.-Software & Tools: Proficiency in Microsoft Office (Word, Excel, Power Point); knowledge of Auto CAD or PVSyst is a plus.

???? Location: 10th of Ramadan City???? Key Responsibilities: Conduct Feasibility Studies for new industrial projects, including technical, operational, and cost evaluation. Prepare project plans, schedules, scopes of work, budgets, and required technical documentation. Evaluate proposed projects and provide recommendations regarding technical feasibility, resources, timelines, and expected costs. Manage the execution, installation, commissioning, and start-up of industrial equipment and production lines. Review engineering drawings, production line layouts, equipment specifications, and technical documents. Coordinate with contractors, consultants, and equipment suppliers to ensure proper project execution. Coordinate with Procurement and Purchasing teams for equipment, materials, and spare parts. Monitor project progress, identify risks, and ensure projects are delivered according to timelines, quality standards, and technical requirements. Prepare progress reports, method statements, commissioning documents, and other project documentation. Requirements: Bachelor’s degree in Mechanical or Industrial Engineering. 6–9 years of experience in industrial projects, preferably in factories, production lines, or industrial equipment. Strong experience in preparing and evaluating Feasibility Studies is a MUST. Experience in project execution, equipment installation, commissioning, and start-up. Strong experience in dealing with contractors, consultants, and equipment suppliers. Good knowledge of project planning, documentation, cost evaluation, and technical coordination. Strong communication, problem-solving, and project management skills.

Company Description Giza Power Industry (GPI) is a modern, well-equipped factory located in Giza, Egypt. Established in 1984, GPI specializes in the production of power cables and has successfully opened markets in multiple countries across Egypt, MENA, Africa, and Europe. GPI prides itself on its employees, whom they consider as family, and emphasizes safety and employee satisfaction during their manufacturing process. With a focus on meeting customer needs and achieving client satisfaction, GPI is known for its high-quality products and adherence to industry standards and regulations. Role Description This position involves overseeing and monitoring the implementation of daily work plans established by the department head and managing the work environment to achieve maximum productivity and to develop and improve production processes. Responsibilities1. Monitor work orders in coordination with the production lines and ensure that all machines are ready for operation.2. Record and track incoming and outgoing raw materials, conduct daily inventory counts, and submit reports on them.3. Assist in developing daily plans, monitor their implementation, and submit a report to the department manager.4. Any additional instructions or tasks should be requested from the immediate supervisor.5. Coordinating with various maintenance teams for routine or preventive maintenance.6. Monitor the progress of the production process and eliminate any obstacles that cause delays in product availability.7. Follow up with the Quality Department to ensure that the product complies with the technical specifications listed in the work order, in accordance with the established plan and the required work order.8. Organize leave and prepare work schedules in coordination with the supervisor and the department manager, and have leave approved by the department manager.<br>Requirements Bachelor's degree in Engineering (Electrical, Mechanical, or Industrial Engineering) or a related field.2 to 5 years of Experience in drawing and stranding of cables. In-depth knowledge of cable production processes, machinery, and quality standards. Strong leadership and team management skills, with the ability to lead production teams effectively. Proficiency in Microsoft Office tools (Excel, Word, Power Point). Excellent communication, problem-solving, and decision-making skills. Ability to work under pressure and meet production deadlines. Job Benefits:Competitive salary based on experience and qualifications. Monthly Production-based incentives. Annual profit share. Social and medical insurance. Supportive and dynamic work environment.company-provided transportation.5 working days per week (Friday & Saturday off). If you are a motivated individual looking to grow professionally in a dynamic work environment, we want to hear from you! Apply now to join Giza Power Industry as a Drawing and Stranding Engineer. To apply, please send your resume to Careers@gpi.com.eg . with the mail subject " Drawing and Stranding Engineer ".

Responsibilities Design, develop, and implement scalable end-to-end IoT solutions and architectures. Lead firmware development and IoT device integration activities. Develop and integrate IoT solutions using protocols such as MQTT, CoAP, and HTTP. Ensure IoT device, platform, and data security across all layers, including authentication, encryption, and certificates. Integrate IoT platforms with enterprise backend systems and applications. Design and develop backend services and microservices supporting IoT ecosystems. Lead the troubleshooting and resolution of complex production issues. Participate in solution architecture reviews and contribute to technical decision-making. Support UAT, production rollout, deployment, and post-production optimization. Maintain architecture diagrams, technical documentation, and system design specifications. Collaborate effectively with cross-functional teams, including software, cloud, infrastructure, and business teams. Mentor junior engineers and conduct code and technical design reviews. Contribute to CI/CD and Dev Ops practices to improve development and deployment processes. Monitor and optimize IoT platforms, services, and real-time data processing pipelines.<br>Technical Requirements Bachelor's degree in computer engineering, Computer Science, Electrical Engineering, or a related field. Strong hands-on experience in end-to-end IoT architecture and solution design. Very good knowledge of IoT protocols, including MQTT, CoAP, and HTTP. Very good experience in Embedded Systems Programming using C/C++ and Python. Very good experience with Cloud IoT Platforms, preferably AWS IoT and/or Azure IoT. Strong experience in Backend Development and Microservices Architecture. Strong knowledge of databases, including Time-Series, SQL, and NoSQL databases. Very good knowledge of Linux/Unix administration. Good understanding of networking and IoT connectivity technologies, including LTE, NB-IoT, and LoRaWAN.

Company Description City Floor Decoration is the exclusive reseller of Forbo Flooring products in Egypt, offering a broad range of high-end solutions for commercial environments. Partnering with a global leader with more than 150 years of experience, the company provides floor coverings that connect materials, perfect surfaces, and support the smooth transport of people and goods. Forbo flooring systems play a key role in how individuals experience quality of life at home, at work, and in public spaces. With a focus on environmentally friendly, functional, and design-oriented products, City Floor Decoration supports clients across Egypt in creating durable and aesthetically appealing interiors. Role Description The Junior Business Development Engineer is a full-time, on-site role based in New Cairo. This role supports the growth of City Floor Decoration by identifying new business opportunities, assisting in client acquisition, and maintaining existing customer relationships. Day-to-day tasks include preparing technical and commercial proposals, conducting site visits, coordinating with the sales and technical teams, and supporting product presentations and demonstrations. The Junior Business Development Engineer also assists in market research, competitor analysis, and the implementation of business development strategies to expand the customer base and increase revenue. Collaboration with internal stakeholders to ensure accurate project specifications and customer satisfaction is a key part of the role. Qualifications Solid foundation in engineering or a related technical field, with the ability to understand flooring systems, product specifications, and basic design requirements. Strong business development and sales orientation, including skills in lead generation, client relationship management, and negotiation. Ability to conduct market research and basic data analysis to support strategic planning and identify growth opportunities. Effective communication and presentation skills, with the capability to explain technical concepts to non-technical stakeholders. Organizational and time-management skills to handle multiple projects, site visits, and client interactions efficiently. Bachelor’s degree in Engineering (Civil, Architecture, or related discipline) or Business with technical aptitude is preferred. Proficiency in MS Office tools (Word, Excel, Power Point) and basic CRM or sales tracking systems. Ability to work on-site in New Cairo and conduct regular client and project visits as required. Prior internship or up to 2 years of experience in business development, sales engineering, or construction/interiors is an advantage. Commitment to ethical, inclusive, and team-oriented work practices in a diverse environment.

JOB PURPOSEResponsible for leading and controlling all body and paint repair operations for heavy bus fleets to ensure buses are restored to OEM standards with optimal quality, cost, and turnaround time. The engineer will directly supervise repair activities for bus types including MCV, Volvo, MAN, and Irizar.<br>KEY RESPONSIBILITIESA. Technical & Repair Operations (Core)- Lead full body repair process: accident damage assessment, chassis straightening, panel beating, welding, fiber-glass repair, and structural alignment for MCV, Volvo, MAN, Irizar buses.- Supervise complete paint cycle: surface preparation, putty application, sanding, primer, base coat, clear coat, color matching, and polishing in spray booth.- Diagnose structural damages and prepare detailed technical reports including repair methodology, spare parts list (BOM), estimated man-hours, and material consumption.- Ensure all repairs comply with OEM body builder manuals and safety standards.- Approve final quality inspection before bus handover to Operations. B. Workshop Management & Optimization- Plan and schedule daily workload in body & paint shop to achieve target TAT (Turnaround Time).- Manage workshop resources: manpower, paint booth utilization, compressors, tools, and paint mixing room.- Control paint material consumption (paint, hardener, thinner, clear coat) and minimize waste and rework percentage.- Maintain workshop 5S, housekeeping, and HSE compliance for chemical handling, ventilation, and waste disposal.- Ensure preventive maintenance of workshop equipment: spray booths, paint mixing machines, sanders. C. Cost, KPIs & Documentation- Prepare accurate cost estimates for insurance cases and internal fleet repair.- Track and improve KPIs: Bus Turnaround Time, First Time Right %, Rework Rate, Paint Material Cost / Bus, Booth Productivity.- Maintain all job cards, paint codes, repair history, and documentation in ERP / Fleet Management System.- Coordinate with Spare Parts, Procurement, Insurance, and Fleet Planning teams. D. People & Safety Leadership- Lead, train, and motivate team of body repair technicians, denters, and painters.- Conduct daily toolbox talks and enforce PPE and HSE policy at all times.- Evaluate team performance and identify training needs for new repair techniques.<br>REQUIREMENTSEducation- Must have Bachelor’s Degree in Mechanical Engineering - Mechanical specialty is mandatory. Experience- 3-5 Years of proven experience as a Body & Paint Engineer / Workshop Engineer.- Mandatory Background: Hands-on experience in Body & Paint Repair Workshop for BUSES - specifically MCV, Volvo, MAN, Irizar. Truck or passenger car experience alone is not sufficient.- Experience with insurance assessment and claim settlement is highly preferred. Technical Skills- Deep knowledge of bus body structure, monocoque / ladder chassis, and body panels for MCV, Volvo, MAN, Irizar.- Expert in automotive paint technology: paint mixing, spectrophotometer, color matching, curing.- Ability to read and interpret engineering drawings, body repair manuals, and measurement systems.- Familiar with HSE regulations for paint workshops.<br>Work Conditions- Employment Type: Full-time.- Location: Kattamya, Cairo.<br>Interested candidates to send their updates resume to careers@gobus-eg.com mentioning the job title in the subject line.

We are looking for a Solar Site Engineer for a well-known renewable energy company.<br>Key Responsibilities:1- Site Supervision: Supervise crew members, monitor daily installation processes, and ensure adherence to safety and quality standards on-site.2- Timeline & Resource Tracking: Assist in preparing and tracking project timelines, milestones, and material usage on site.3- Site Coordination: Coordinate between site requirements, installation teams, and project timelines to ensure smooth execution.4- Technical Support: Assist in utility interconnection processes, electrical inspections, and technical site meetings.5- Stakeholder Interaction: Maintain effective communication with contractors, consultants, and technical teams on site.<br>Job Requirements:-Education: Bachelor’s degree in Electrical Engineering or a relevant field.-Experience: 1 to 3 years of total experience, with a minimum of 1 year specifically in solar energy projects (On-grid, Off-grid, Hybrid, or Solar Pumping).-Location: Residence in Giza (or nearby areas).-Technical Skills: Good understanding of PV system installations, components, and regulatory codes.-Software & Tools: Proficiency in Microsoft Office (Word, Excel, Power Point); knowledge of Auto CAD or PVSyst is a plus.

???? WE’RE HIRING | TECHNICAL SALES ENGINEERS – FIREFIGHTING<br><br>YAMA Engineering Systems is expanding its Sales Team and looking for ambitious, results-driven Engineers with strong technical knowledge and hands-on sales experience in the Firefighting industry.<br><br>???? OPEN POSITIONS<br><br>???? Junior Technical Sales Engineer<br>• 6 Months+ experience<br>• Mechanical Engineering degree<br>• Firefighting Sales experience is highly preferred<br>• Good communication & negotiation skills<br><br>???? Senior Technical Sales Engineer<br>• 4–6 years of experience in Firefighting Sales<br>• Mechanical Engineering degree<br>• Strong experience with Fire Pumps, Pump Sets & Firefighting Cabinets<br>• Experience dealing with Consultants, Contractors & Clients<br>• Strong technical, sales & negotiation skills<br><br>???? Technical Sales Team Leader<br>• 6–8 years of experience in Firefighting Sales<br>• Mechanical Engineering degree<br>• Strong technical & commercial knowledge<br>• Strong experience with Fire Pumps, Pump Sets & Firefighting Cabinets<br>• Proven experience dealing with Consultants & key clients<br>• Strong leadership & business development skills<br><br>???? WE’RE LOOKING FOR<br>• Strong technical knowledge of Firefighting Systems<br>• Experience with Fire Pumps, Pump Sets & Firefighting Cabinets<br>• Experience dealing with Consultants & technical approvals<br>• Strong Sales, Negotiation & Client Relationship skills<br>• Ability to understand client requirements and provide the right technical solution<br>• Proven ability to achieve sales targets<br><br>???? TO APPLY<br>Send your updated CV to:<br>Recruitment@yama-es.com<br><br>⚠️ IMPORTANT<br>Fresh Graduates are not eligible for these positions. Candidates must have relevant experience in Firefighting Sales, with strong preference for candidates experienced in Fire Pumps, Pump Sets & Firefighting Cabinets and dealing with Consultants.<br><br>Mechanical Engineers are preferred. Electrical Engineers with direct and relevant Firefighting experience may also be considered.<br><br>#WeAre Hiring #Hiring #Technical Sales #Sales Engineers #Firefighting #Firefighting Systems #Fire Protection #Fire Pumps #Pump Sets #Firefighting Cabinets #Mechanical Engineers #Sales Jobs #Engineering Jobs #Egypt Jobs #Cairo Jobs #YAMAEngineering Systems

We’re Hiring: Façade Technical Office Engineer<br>Our valued client is seeking experienced Façade Technical Office Engineers to join their multidisciplinary project teams. We are looking for engineers with a strong façade technical background and hands-on experience in developing, coordinating, and reviewing façade shop drawings and BIM packages.<br>Role Overview:As a Façade Technical Office Engineer, you will be responsible for developing, coordinating, and reviewing façade shop drawings and BIM models while ensuring compliance with project requirements, technical standards, and design specifications. You will work closely with Architecture, Structure, and MEP teams to ensure smooth coordination and successful project delivery.<br>What We’re Looking For:Bachelor’s Degree in Civil Engineering, Architectural Engineering, or a related field.2–10 years of relevant experience in façade technical office, curtain-wall systems, and/or façade BIM. Strong proficiency in Auto CAD and Revit/BIM. Solid experience with unitized and stick curtain-wall systems, including glazing, spandrels, louvers, framing, and brackets. Ability to develop and coordinate façade shop drawings and BIM models with other disciplines. Good understanding of façade detailing, constructability, and technical coordination. Strong technical skills with attention to detail and project requirements. Experience with high-rise façade projects is a plus.<br>Why You’ll Love This Role:Work on high-profile, multidisciplinary façade projects. Gain exposure to diverse engineering and construction projects. Develop your façade technical and BIM expertise in a professional, fast-paced environment. Collaborate with experienced multidisciplinary project teams.<br>???? How to Apply:Please send your updated CV to merna.magdy@deskhub.online, mentioning “Façade Technical Office Engineer” in the subject line.<br>We look forward to hearing from you!

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Operation and Maintenance Engineer is reporting to the Plant Head (Facility Manager or his delegate). He is responsible for the day-to-day operation of the PHGs 250 SMRs units, H2 compressor and backup system based on the Air Products Ain Sokhna.<br><br>Working alongside the AP personals at site and country to ensure the smooth and reliable operation and maintenance of all aspects of the Air Products Ain Sokhna facility.<br><br>Nature and Scope<br><br>St Gobain site in Al Ein Sokhna is Air Products 3rd fully owned and operated plant in Egypt.<br><br>The Plant Consists Of<br><br>2 x PHG250 small Steam Methane Reformers (SMR). H2 compressor. Backup system<br><br>The customer is St Gobain. The Air Products plant is located within the customer’s site. The products from the Air Products plants go directly to the mix station that AL is mixing with N2 before sending to St Gobain area. There is a high level of integration between St Gobain and Air Products with respect to feedstock’s, products and utilities. The products are critical to Glass plant operations.<br><br>The plants run on continuous basis and there is a strong emphasis of high reliability and high efficiency.<br><br>Principal Responsibilities<br><br>Understand all relevant EH&S regulations applicable to the facility and develop plans on how they will be implemented at the facility to ensure compliance. Understand and implement Air Products EH&S work processes including emergency preparedness and incident management. Report, and where possible, eliminate all potential hazards by using the Air Products Basic Safety Practice (BSP) system. Regularly participate in site and operations safety meetings to ensure all safety related issues are identified, discussed, understood and then successfully resolved. As part of the on call team, responsible for the security and safety of site, liaise with the customer as appropriate. Maintain company rules for discipline, punctuality, absenteeism, etc.,Maintain good housekeeping and tidiness in the facility. At all times wear appropriate Personal Protective Equipment (PPE). Support of all aspects of the day-to-day operation of the H2 plant, including troubleshooting plant process problems, carrying out the daily plant activities and participating in the plant projects. Ensure that customer requirements are met at all times, by direct liaison and administration of the site quality procedures. Working with AP personals at site and support resources to achieve productivity targets.have expert knowledge of and to operate and maintain all systems, identified under job dimensions’ section so that the optimum performance and reliability is achieved at all times. Make entries into plant logbook to include all operating data, messages, unusual events, work done & spares used. Liaise with personnel oncoming to site to communicate plant conditions, work instruction; existing work permits in force etc. Collect production data, check for errors or signs of plant problems. Be able to resolve discrepancies prior bringing to the attention of Facility Manager. Carry out routine and specific work tasks as directed by Facility Manager or his delegate and to be able to identify work required. Start, stop and isolate equipment and unit processes as required. To be fully conversant with all modifications carried out on site as the plant/customer requirements dictate. As and when possible, learn to operate any other plants in the facility to allow more flexibility in working arrangements. During plant shutdowns maintain overall control of safety and operation on the plant. Provide assistance and support to the team performing the maintenance. Provide technical, operational and trouble-shooting assistance at the facility as and when required. Ensure that routine maintenance as designated by the SAP PM system and non-routine maintenance as and when required, is diligently performed to the necessary standards, utilizing the resources within the plant and outside resources where required (contract labor / outside technicians). Work with minimal supervision on the Air Products, site - designated continuous shift or “On – Call” system. This requires working and managing all job activities, for periods of time up to and beyond a full shift period, when circumstances make this necessary. Respond to critical alarm dial outs from the Plant (or by other contact from customer etc) by remote connection to site to ensure product supplies remain on line to customer as required. Carry out remote start-up of Plant/equipment as and when required during period On Call. Provide cover as required and when available. To be able, as required, to stand in for the Facility Manager should circumstances make this necessary.<br><br>Minimum Requirements<br><br>Bachelor degree in Instrumentation/Electrical Engineering. Minimum 5 years’ experience in gas, petrochemical, or related industries. Excellent Communication & coordination skills. Fluent oral English and excellent written English.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

Company Description Hossam Saad Designs Studio is an interior design and construction firm based in New Cairo, Egypt, bringing together motivated architects and interior designers. The studio specializes in concept-driven design and turnkey delivery of residential and commercial projects. Teams work closely with clients to translate ideas into functional, visually appealing spaces. With an end-to-end approach from design to execution, the studio focuses on quality, timely delivery, and attention to detail, offering professionals a dynamic environment to contribute to diverse interior projects.<br>Role Description The Interior Site Engineer is a full-time, on-site role located in New Cairo. The role involves overseeing day-to-day site activities, coordinating with designers, contractors, and suppliers, and ensuring that interior works are completed according to drawings, specifications, and quality standards. Responsibilities include monitoring construction progress, managing site schedules, resolving technical issues, and verifying that materials and finishes meet design and safety requirements. The Interior Site Engineer will conduct regular site inspections, prepare reports, support cost and time control, and ensure compliance with local regulations and company procedures.<br>Qualifications<br> Strong technical skills in interior construction, including understanding of drawings, specifications, materials, and finishing details. Experience in site supervision, coordination with contractors and suppliers, and day-to-day management of construction activities. Proficiency in relevant software such as Auto CAD, Revit or similar CAD tools, and MS Office for documentation and reporting. Knowledge of local building codes, safety standards, and quality control procedures for residential and commercial interior projects. Excellent communication and interpersonal skills, with the ability to collaborate effectively with design teams and stakeholders. Strong organizational and problem-solving abilities, with a focus on meeting timelines and handling multiple tasks on site. Bachelor’s degree in Civil Engineering, Architecture, Interior Engineering, or a related field. Previous experience in interior fit-out or turnkey projects in Egypt is preferred.

First Tech is a technology company focused on building, scaling, and delivering innovative digital platforms across financial services and other industries.<br>We combine technology, product expertise, and a deep understanding of customer needs to create solutions that simplify complex processes and deliver seamless digital experiences. Our platforms are designed to be scalable, reliable, and impactful, helping businesses and customers navigate the evolving digital landscape with confidence. Founded with a vision to accelerate digital transformation, First Tech brings together strong engineering capabilities, product development expertise, and a culture of innovation to build modern solutions that address real-world challenges.<br>By partnering with forward-thinking businesses and developing technology-driven products, we aim to reshape industries and improve everyday experiences. We believe in creating an inclusive, collaborative environment where talented individuals are empowered to innovate, grow, and make a meaningful impact.<br>What You'll DoDefine and drive quality strategy across the entire product development lifecycle. Partner with Product Managers and Engineers to embed quality into every stage of development. Leverage AI-powered testing tools to accelerate test design, automation, and defect analysis while ensuring comprehensive test coverage. Design, review, and maintain automated and manual test cases based on functional and non-functional requirements. Plan and execute functional, regression, integration, performance, and usability testing. Validate AI-generated test cases, automation scripts, and testing outcomes to ensure accuracy, reliability, and coverage. Identify, document, prioritize, and track defects through resolution, working closely with engineering teams. Continuously improve test automation frameworks, quality processes, and release readiness. Analyze product quality metrics and provide actionable insights to improve product reliability and user experience. Collaborate with cross-functional teams in an Agile environment to ensure timely, high-quality feature delivery. Mentor QA team members and promote engineering excellence, quality best practices, and AI-driven testing methodologies. Continuously evaluate emerging AI tools, testing frameworks, and industry best practices to improve team productivity and software quality. Produce and maintain clear test documentation, quality standards, and testing procedures. Take ownership of product quality from feature planning through production release and post-release validation.<br><br>What We're Looking For Bachelor's degree in Computer Science, Software Engineering, or a related technical field.4-8 years of experience in Software Quality Assurance or Quality Engineering. Experience working in an AI-assisted testing environment using modern AI-powered QA and automation tools. Strong ability to review, validate, and refine AI-generated test cases, automation scripts, and test results. Experience designing and executing manual and automated testing for web and mobile applications (i OS and Android). Solid understanding of functional, regression, integration, performance, and API testing. Experience with SQL Server (MS SQL) for data validation and backend testing. Experience with test automation frameworks such as Selenium, Appium, Playwright, or equivalent tools is an advantage. Familiarity with REST APIs and API testing tools (e.g., Postman or equivalent). Proficiency with Git, Git Hub, Jira, and Agile development methodologies. Basic knowledge of . NET applications and software development practices is a plus. Excellent analytical, problem-solving, and communication skills, with the ability to collaborate effectively across cross-functional teams. Passion for leveraging AI to improve testing efficiency, product quality, and engineering productivity.<br>Working Model: 5 days in office Location: Nasr City<br>So, what does it really mean to work at First. Tech? We are building a company where people are empowered to do their best work and grow. Our culture is rooted in ownership, collaboration, and continuous learning.<br>As part of First Tech, you will be working in an environment that values innovation, speed, and impact, while giving you the opportunity to shape products that directly affect how people experience financial services.<br>We are an equal opportunity employer and are committed to building a diverse and inclusive team. We welcome people from all backgrounds and encourage you to apply if this role excites you.

Welcome to GROW: Our Post Graduate Program at Holcim Egypt.<br>This 1-year program is designed to accelerate your professional growth and provide hands-on experience in your field of interest.<br>This Program Starts on October 1st, 2026<br>WHO IS HOLCIM? A global leader in innovative and sustainable building solutions, Holcim is enabling greener cities, smarter infrastructure, and improved living standards all over Egypt. With sustainability at the core of our strategy, we are becoming a net-zero company, thriving with our people and communities. Holcim Egypt launched one of the largest cement plants in the MENA region which is located in Ain Al-Sokhna, with a plant capacity of 9.5 MT and 5 state-of-the-art production lines. Through its established business operations in Cement & Ready-Mix concrete; Holcim Egypt has demonstrated its commitment to the provision of sustainable building materials. <br>Qualifications:Computer Science/ Computer Engineering Grads. Graduates of 2025 to 2026 ONLY. Completed or postponed military status (Males)

Company Description City Floor Decoration is the exclusive reseller of Forbo Flooring products in Egypt, offering a wide range of high-end solutions for commercial and residential spaces. As a partner of a global leader with more than 150 years of experience, the company provides environmentally friendly, functional, and design-oriented floor coverings. Forbo’s materials and systems are integrated into everyday life, from the surfaces people walk on to solutions that support production lines and logistics. City Floor Decoration connects these global innovations with the local market, helping clients enhance quality of life and performance in their spaces.<br>Role Description The Senior Business Development Engineer is a full-time, on-site role based in New Cairo. This role is responsible for identifying and developing new business opportunities, expanding the customer base, and strengthening relationships with key commercial and residential clients. Daily tasks include conducting market analysis, preparing and presenting technical and commercial proposals, coordinating with internal teams to ensure accurate product specifications, and following up on leads to close sales. The Senior Business Development Engineer will also collaborate with management to shape growth strategies, support pricing decisions, and provide feedback on customer needs and market trends. The position requires regular client visits, product demonstrations, and participation in industry events to promote City Floor Decoration and Forbo solutions.<br>Qualifications Strong Business Development and New Business Development skills, with a proven track record in identifying opportunities and driving growth. Sales and Communication skills to build relationships, negotiate effectively, and present solutions to diverse stakeholders. Analytical Skills to assess market data, evaluate customer requirements, and support strategic decision-making. Bachelor’s degree in Engineering, Business, or a related field, or equivalent practical experience. Experience in flooring, construction materials, building finishes, or a related industry is highly beneficial. Ability to work on-site in New Cairo, manage multiple projects, and collaborate effectively with cross-functional teams. Proficiency in using CRM tools and MS Office applications; strong reporting and documentation capabilities. Professional working proficiency in English; additional languages are an advantage.

???? Hiring: Sales Mechanical Fire Protection Engineer — Cairo, Egypt<br>Company Description Nile Systems for Contracting is a specialized fire protection company focused on advanced Water Mist and integrated fire protection systems.<br>Role Description Sales Firefighting Engineer is a full-time, on-site role based in New Cairo, responsible for driving sales of fire protection systems. Qualifications Sales Engineering and Technical Support skills. Bachelor’s degree in Mechanical Engineering. With minimum two years experience in firefighting systems, Water Mist technologies is preferable. For Apply, Please send your CV to below details:Whatsapp: +201063399363Mail: mokhtar@nilesystemsco.com<br>#Hiring #Fire Protection #Mechanical Engineering #Cairo #Egypt #Engineering

Company Description Pinnacle Construction Projects (PCP) is a full-service construction and fit-out company that has been delivering high-quality project solutions for over 17 years across residential, commercial, hospitality, and mixed-use developments. PCP specializes in transforming concepts into fully operational spaces that align with client requirements, offering fit-out, design & build, refurbishment, renovations, and facilities management under one structured platform. From early planning to final handover, the company follows a structured, detail-oriented, performance-driven approach. PCP combines strong technical expertise with robust project management practices to safeguard timelines, budgets, and quality standards. The company’s strength lies in its team, commitment to excellence, and long-term partnerships built on trust, transparency, and measurable results.<br>Role Description The Commercial & QS Engineer – Electrical role is a full-time, on-site position based in Egypt. The individual in this role will manage electrical cost estimation, quantity surveying, and commercial activities for construction and fit-out projects. Day-to-day tasks include preparing bills of quantities, analyzing drawings and specifications, and supporting tender preparation and evaluation for electrical systems. The role involves coordinating with project teams, suppliers, and subcontractors to secure competitive quotations, negotiate terms, and ensure compliance with project budgets and contractual requirements. The Commercial & QS Engineer – Electrical will also assist in contract administration, variation analysis, cost reporting, and value engineering, while maintaining accurate documentation and supporting timely project delivery.<br>Qualifications<br> Sales Engineering and Sales skills to support commercial activities, client proposals, and technically informed offers. Strong Communication and Negotiation skills to collaborate with clients, suppliers, and internal teams, and to secure favorable commercial terms. Training skills to support knowledge transfer, onboarding of team members, and continuous improvement of commercial and QS practices. Solid background in Electrical Engineering with experience in quantity surveying, cost estimation, and commercial management in construction or fit-out projects. Ability to interpret technical drawings, specifications, and contracts, and to prepare accurate bills of quantities and cost reports. Proficiency in relevant QS and estimation software, MS Office (particularly Excel), and documentation tools. Strong analytical, organizational, and time-management skills with attention to detail and a focus on meeting deadlines. Bachelor’s degree in Electrical Engineering or a related field; prior experience in a similar role in Egypt or the region is an advantage.

Established in 2008, Geidea epitomizes customer focused empowerment and commercial success through continuous innovation. Geidea makes best in class digital payment solutions available for all by attracting and leveraging the best creative & entrepreneurial talent in the market Our solutions give any business the chance to get ahead and reach for more no matter their size or maturity. Our technology mirrors our people - Smart, Innovative & Forward Thinkingwww.geidea.net<br>To maintain a competitive advantage as we grow, we are currently looking for a new "SR. Software Tester".<br>Job purpose:The purpose of this role is to design & execute test cases and ensure implementation according to the testing guidelines the team in Geidea Egypt to ensure delivery of products of high quality.<br>Key Responsibilities:Design and execute test cases Review test cases assigned to Jr. Testers Prioritize test cases on squad level Report defects Report on testing status and squad releases Ensure testing scope is defined, and ensure coverage of assigned squad Analyse test results, report bugs to Senior Tester or Testing lead Ensure testing is done according to guidelines Ensure accuracy of testing estimates within the assigned squad Ensure testing quality and adherence to testing process and guidelines Define/Develop automation test scripts if needed / requested on squad level<br>Qualifications:4-7 years of experience Bachelor’s degree in engineering or computer science Analyse user stories, use cases, and requirements for validity and feasibility Writing and executing test cases and test plans Detect and track software defects and inconsistencies Execute all levels of testing (System, Integration, and Regression) Good knowledge of relational databases and Microsoft SQL Server API testing knowledge Familiar with Jira Proficient in English Understanding of testing methodologies and tools Experience in Automation is a plus ISTQB Certified<br>Our values guide how we think and act - They describe what we care about the most Customer first - It’s embedded in our design thinking and customer service approach Open - Openness allows us to constantly improve and evolve Real - No jargon and no excuses! Bold - Constantly challenging ourselves and our way of thinking. Resilient – If we fail, we bounce back stronger than before. Collaborative - We know that we can achieve a lot more as a team. We are changing lives by constantly striving for a better solution.

To ensure the on-time delivery of the proper material complete with verification documents to project Sites.<br>Job Responsibilities:<br>Prepare and update annual audit plan; Conduct internal audits; Ensure compliance with QMSAssign and monitor tasks of subordinates; Ensure fair distribution of work; Support staff development Follow up implementation of corrective actions; Determine root causes of non-conformance; Track non-conformance logs. Maintain and validate certifications; Update or acquire new certificates; Liaise with third-party auditors Analyze quality data; Recommend QMS improvements; Identify areas for improvement Prepare audit reports; Submit progress reports to supervisor; Participate in coordination meetings Conduct internal QA training and awareness sessions; Assist in staff skill development HSE Responsibilities Protect, and strive for improvement of, the health, safety and security of our people at all times;Eliminate Quality non-conformances and HSE accidents;Ensure consistent and continuous compliance by all employees and vendors with safety and regulatory requirements, standards and protocols Responsible for creating safe work environment, manage risks and reduce exposure to liability Support line Management in managing HSE Incidents, corrective/preventive actions<br>Job Requirements:<br>Qualification: Bachelor of Engineering, “Electrical, Mechanical, Civil”.5-9 Years of experience in related field. Computer skills: ERP System. – MS office Preferred: Technical Audit Report writing, ISO 9001 Quality Management systems EPC project's experience is a must

Company Description Pinnacle Construction Projects (PCP) is a full-service construction and fit-out company that has been delivering high-quality project solutions for over 17 years across residential, commercial, hospitality, and mixed-use developments. PCP specializes in transforming concepts into fully operational spaces aligned with each client’s specific requirements. The company provides end-to-end services including fit-out, design & build, refurbishment, renovations, and facilities management under one structured platform. PCP’s approach is detail-oriented and performance-driven, safeguarding timelines, budgets, and quality standards. The organization values technical expertise, reliability, and long-term partnerships built on trust, transparency, and measurable results.<br>Role Description The Commercial & QS Engineer – Mechanical role at PCP is a full-time, on-site position based in Cairo. This role is responsible for preparing and reviewing mechanical cost estimates, bills of quantities, and tender documents, ensuring compliance with project specifications and company standards. The engineer will manage commercial aspects of mechanical works, including pricing, cost control, and contract administration, while coordinating with project managers, site engineers, and suppliers. Daily tasks include analyzing drawings and technical documents, supporting procurement with quantities and specifications, and monitoring variations and claims to maintain budget integrity. The role also involves supporting sales and business development teams with technical input, participating in client meetings, and providing clear documentation and reports on project commercial performance.<br>Qualifications<br> Strong Sales Engineering and Sales skills to support commercial proposals and client-facing activities. Effective Communication and Negotiation skills to collaborate with stakeholders and manage contracts and agreements. Ability to deliver Training and technical guidance to internal teams on mechanical and commercial procedures. Bachelor’s degree in Mechanical Engineering or a related discipline. Experience in quantity surveying, cost estimation, and commercial management for mechanical systems in construction projects. Proficiency in relevant engineering and QS software (e.g., Auto CAD, MS Excel, estimation tools). Strong analytical, problem-solving, and organizational skills, with attention to detail and accuracy. Knowledge of local building codes, standards, and contractual frameworks; previous experience in Cairo or the regional market is an advantage.