Production Worker Jobs

About the Job:<br>The General Assembly Engineer is responsible for planning, optimizing, and supporting assembly operations to ensure the safe, efficient, and cost-effective production of vehicles/products according to quality standards and production targets. The role focuses on process improvement, problem-solving, productivity enhancement, and implementation of manufacturing best practices within the General Assembly area.<br>Responsibilities:<br>Health, Safety & Environment Ensure compliance with company safety regulations and procedures. Promote a strong safety culture and proactively identify and mitigate risks. Support ergonomic evaluations and workplace safety initiatives. Lead incident investigations and implement corrective actions to prevent recurrence. Production Support:Drive accountability for performance, discipline, and adherence to operational standards. Monitor daily assembly operations and ensure production targets are achieved. Ensure consistent delivery of Safety, Quality, Cost, and Delivery (SQCD) objectives. Support line balancing and manpower optimization activities. Ensure smooth production flow and minimize downtime. Coordinate with production supervisors to resolve operational issues. Lead immediate response to production issues, including line stoppages and bottlenecks. Process Improvement:Analyze assembly processes and identify opportunities for continuous improvement. Implement Lean Manufacturing, Kaizen, and waste reduction initiatives. Conduct cycle time studies and optimize workstation layouts. Develop and update Standard Operating Procedures (SOPs) and Work Instructions. Built In Quality:Ensure production output meets defined quality standards and customer expectations. Investigate assembly defects and implement corrective and preventive actions. Support root cause analysis activities using tools such as 5 Why, Fishbone Diagram, and PDCA. Work closely with Quality Engineers to improve Direct Run Rate and reduce rework. Ensure compliance with product quality standards and customer requirements. Equipment and Tool Management: Support installation and commissioning of assembly equipment and tooling. Coordinate preventive maintenance activities with the Maintenance team. Evaluate tooling requirements and recommend improvements. Project Management Participate in new model launches and production ramp-up activities. Support manufacturing feasibility studies and process validation. Coordinate engineering changes and process updates. Reporting and Analysis: Monitor and report assembly KPIs, including: Productivity Efficiency Throughput Defect Rate Rework Rate Downtime Prepare technical reports and presentations for management review.<br>Qualifications:<br>Bachelor’s degree in Automotive engineering, Mechanical engineering, Industrial Engineering, Mechatronics Engineering, or related field.1-3 years of experience in manufacturing or assembly operations. Experience in automotive manufacturing is preferred. Six Sigma Certification is preferred. (Yellow Belt or Green Belt). IATF 16949 Background is preferred.

Company Description Guerrilla by Saqr is a full-service marketing and events agency, founded in 2017, focused on creating experiences that connect brands with people. The agency specializes in below-the-line marketing, brand activations, corporate events, exhibitions, and experiential campaigns. Its work centers on delivering creative, engaging, and results-driven brand experiences across diverse industries. Team members collaborate closely with clients to translate marketing objectives into impactful live and interactive events. The culture emphasizes innovation, attention to detail, and measurable outcomes for every project. Role Description The Event Production Manager is a full-time, on-site role based in Cairo, Egypt, responsible for overseeing end-to-end production of events and activations. This role involves translating client briefs into detailed production plans, coordinating with internal teams and external vendors, and managing timelines, budgets, and logistics to ensure seamless execution. The Event Production Manager will lead on-site setup and breakdown, supervise technical and production crews, and troubleshoot issues during events. Daily tasks include preparing production schedules, sourcing materials and equipment, maintaining cost control, and ensuring compliance with safety and quality standards. The role requires ongoing collaboration with account managers, creative teams, and suppliers to deliver high-quality, brand-aligned experiences on time and within budget. Qualifications Candidates should possess strong Production Management and Event Production skills to oversee all technical and operational aspects of events. Candidates should possess solid Event Planning and Budgeting skills to manage timelines, resources, and financials effectively. Candidates should possess excellent Communication skills to coordinate with clients, internal teams, and external vendors.3+ years of relevant experience in marketing, events, or experiential campaigns, preferably within an agency environment. Proven ability to manage multiple projects simultaneously and work under time-sensitive conditions. Strong organizational and problem-solving skills, with attention to detail and quality control. Comfort working on-site at events, including evenings or weekends as required by project schedules. Bachelor’s degree in Events Management, Marketing, Business, Communications, or a related field is preferred.

About the Job:<br>Body Shop Production Engineer is responsible for the implementation of production processes related to assigned Body welding Line, by leading Line team leaders and operators to achieve production KPIs according to standards. Candidate shall demonstrate strict adherence to safety protocols, high-quality process possible, ensuring no dimensional or welding defect is built in Body Shop line. <br><br>Responsibilities: Safety:Enforce a strict safety culture in a high-risk environment involving robotics, high-voltage equipment, hoists and welding operations. Ensure full compliance with Personal Protective Equipment (PPE) for him and his team. Enforce a zero-tolerance policy for bypassing safety controls on robotics and welding equipment. Partner with the Safety & Environmental team to manage and mitigate risks associated with production processes. People:Lead, train, and mentor production team leaders and welding technicians in all production aspects including safety awareness and productive maintenance. Manage his team and evaluate their performance on a regular basis. Quality:Monitoring the real-time CMM, weld validation, dimensional control, and error-proofing on daily basis and apply process control techniques thru his team as per standards. Fast response to any feedback from quality gates and/or quality audit to contain and close issues properly. Work directly with the Quality team and ME team to resolve dimensional variation, welding defects, and equipment capability issues. Productivity:Achieve the daily production schedule for his responsible model line, managing the line to achieve takt time. Maximize equipment uptime and availability by working closely with the Maintenance team. Drive efficiency in the framing, welding, and metal finish processes by identifying and eliminating waste. Cost:Optimize consumable usage (welding wire, gas) and reduce scrap/rework to minimize cost. Control proper usage of PPEs to optimize the consumption rate.<br> Qualifications: Bachelor’s degree in engineering (Mechanical, Electrical, Welding) or a related field.1-3 years of experience in an automotive Production Body Shop. Strong technical knowledge of spot welding, bonding technologies, and geometric dimensioning is essential. Experience with CKD body assembly processes (working with pre-formed sub-assemblies). Proficiency in reading and interpreting CMM reports to drive dimensional improvements. A strong understanding of maintenance and reliability principles for automated equipment.

Who we are? Americana Restaurants is a leading restaurant operator and food & beverage platform in the MENA region. With a legacy that dates back to 1964, we’ve grown to represent and manage some of the world’s most beloved restaurant brands—including KFC, Pizza Hut, Hardee’s, Krispy Kreme, and many more—across over 12 countries. Our commitment to operational excellence, innovation, and customer satisfaction continues to drive our growth and success in the region. As we expand, we're looking for passionate professionals who thrive in fast-paced, dynamic environments. If you're driven by purpose and motivated to make an impact, we'd love to have you on our team.<br><br>Operational Oversight Support the Commissary Manager in overseeing daily operations and product distribution across all facilities Monitor production activities to ensure schedules are executed efficiently, safely, and in line with operational requirements Assist in maintaining product quality standards and operational consistency across the commissary Team Leadership Support the recruitment, onboarding, training, and supervision of commissary staff Coordinate daily production activities to ensure compliance with company standards and operating procedures Contribute to the development and performance management of production team members Promote teamwork, collaboration, and a positive workplace culture Quality Assurance & HSSupport the implementation and maintenance of quality control measures, food safety requirements, and operational standards Monitor compliance with food safety regulations, company policies, and quality standards Assist in conducting regular audits and inspections to ensure compliance across all operational areas Process Improvemen Support continuous improvement initiatives by identifying opportunities to enhance production efficiency and effectiveness Collaborate with cross-functional teams to optimize workflows, improve productivity, and minimize waste Assist in implementing best practices and operational improvement projects Budget & Cost Control Assist in monitoring facility expenses and budget performance Support cost-control initiatives and efficient resource utilization Contribute to workforce planning, inventory management, and operational cost optimization On-Time Deliver Coordinate with production, warehouse, and logistics teams to support timely product delivery Monitor order fulfillment and distribution processes to ensure service level targets are achieved Reporting & Analysi Maintain accurate records related to production, quality, safety, and operational performance Assist in preparing operational reports, KPI dashboards, and management presentations Utilize operational data to identify trends, support decision-making, and recommend improvements Crisis Management Support the implementation of contingency plans to address emergencies, operational disruptions, and production challenges Assist the Commissary Manager in coordinating response activities to minimize operational impact and ensure business continuity<br>Experience University degree in mechanical engineering, food technology, process engineering, operation management, or similar Mandatory minimum 4+ years’ experience in food production; preferability with poultry production / vegetable / salad production Proficiency in quality control, managing budget, and production costi Advantage with GFSI or related lead auditor experience Starting up of new facility and factory experience

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The MRP Planner is responsible for planning and coordinating material requirements to ensure that all necessary materials are available to support production schedules. The role involves analyzing demand, inventory, purchase orders, and production requirements using an ERP/MRP system. The MRP Planner works closely with Procurement, Production, Warehouse, Quality, Engineering, and Suppliers to prevent material shortages, control inventory levels, and ensure timely delivery of materials. Responsibilities Analyze MRP requirements and production schedules. Plan material purchases and replenishment. Monitor inventory levels and material availability. Identify and resolve material shortages. Follow up on purchase orders and supplier deliveries. Maintain accurate planning parameters and material master data. Coordinate changes in production demand and delivery schedules. Minimize excess inventory and avoid stockouts. Prepare reports related to inventory, shortages, and material requirements. Support continuous improvement of planning and supply-chain processes. Overall objective: Ensure the right material, in the right quantity, is available at the right time to meet production requirements while maintaining efficient inventory levels. Qualifications Bachelor’s degree in Industrial Engineering or a related field. 0-2 years of experience in MRP, material planning, production planning, or supply chain. Good knowledge of MRP, ERP systems, inventory management, and procurement processes. Experience with systems such as SAP, Oracle, Microsoft Dynamics, or similar ERP platforms. Strong Microsoft Excel and data-analysis skills. Understanding of BOMs, lead times, safety stock, reorder points, and production schedules. Strong analytical, organizational, and problem-solving skills. Ability to manage multiple priorities and meet production deadlines. Good communication and coordination skills with internal teams and suppliers. Knowledge of inventory control and supply-chain KPIs. Ability to work effectively in a fast-paced manufacturing environment.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>SUMMARY OF THE ROLE</span></p><br>We are looking for a proactive Production Planner to plan and optimize production to ensure customer demand is fulfilled while balancing inventory levels, production capacity, raw material and packaging availability, manpower, and cost efficiency. To ensure high service levels through effective scheduling and continuous collaboration with cross-functional teams.<br>This role will be based at our factory in 10th of Ramadan and will report to the Planning Manager.<p><b>Responsibilities:</b></p><br><ul><li><p>Develop and maintain production schedules based on customer demand, inventory targets, production capacity, and material availability.</p><br></li><li><p>Monitor and adjust production plans to ensure on-time delivery while responding to changes in demand, capacity, maintenance, or supply constraints.</p><br></li><li><p>Coordinate with Production, Purchasing, Sales, Customer Service, Warehouse, and Quality teams to ensure efficient production and timely order fulfillment.</p><br></li><li><p>Optimize inventory levels by balancing product availability with the reduction of excess, slow-moving, and obsolete stock.</p><br></li><li><p>Monitor planning performance, analyze key KPIs, and identify opportunities to improve planning efficiency and service levels.</p><br></li><li><p>Maintain accurate planning master data and support the Sales &amp; Operations Planning (S&amp;OP) process through capacity analysis and risk management.</p><br></li><li><p>Utilize planning systems and digital tools to improve scheduling accuracy, standardize processes, and drive continuous improvement initiatives.</p><br></li></ul><p><span>WHAT WE ARE LOOKING FOR AND WHAT WE OFFER</span></p><br><p><b>Requirements:</b></p><br><ul><li><p>Bachelor's degree in <span>Engineering or Supply Chain. </span></p><br></li><li><p>2–5 years of experience in production planning within a manufacturing environment.</p><br></li><li><p>Should be able to speak fluently in English and Arabic.</p><br></li><li><p>Proficiency in Microsoft Excel, Power BI, and ERP systems.</p><br></li><li><p>Strong analytical, organizational, and communication skills.</p><br></li></ul><p><b>Competencies We Look for:</b></p><br><ul><li><p>Acts on own initiative, makes things happen and accepts responsibility for the results</p><br></li><li><p>Adheres to company rules and procedures; executes plans with commitment and determination; achieves high quality results</p><br></li><li><p>Uses a methodical and systematic approach; plans ahead, defines clear priorities and allocates resources effectively</p><br></li><li><p>Quickly understands and analyzes complex issues and problems; comes up with sound and rational judgments</p><br></li><li><p>Communicates in a clear, precise and structured way; speaks with authority and conviction; presents effectively ·</p><br></li><li><p>Co-operates well with others; shares knowledge, experience and information; supports others in the pursuit of team goal</p><br></li></ul><p><b>What We offer: </b></p><br><ul><li><p>Competitive compensation and benefits</p><br></li><li><p>Continuous learning opportunities and training activities through on-the-job training and our in-house learning platforms.</p><br></li><li><p>Career development opportunities across multiple disciplines and geographies</p><br></li><li><p>Leaders who focus on engaging and enabling their team, proven by consistently high employee feedback scores</p><br></li><li><p>A supportive and inclusive company culture where you can be your authentic self</p><br></li><li><p>A focus on having fun together through team building and social activities.</p><br></li></ul><p><br><span><b>POSITION INFORMATION</b></span></p><br><p><b>Company:</b></p><br>El-Mohandes Jotun S.A.E.<p><br><b>Contract Type:</b></p><br>Fixed Term (Fixed Term)<p><b>Time Type:</b></p><br>Full time<p><span><b>CLOSING DATE (dd.mm.yyyy):</b></span></p><br>22.08.2026<p><span>WHO WE ARE</span></p><br>Jotun’s story in the MEIA region (Middle East, India and Africa) began in 1962, and has grown to include 18 legal entities committed to achieving success and growth of the Jotun Group. Throughout our history, we have focused on providing our employees with meaningful and challenging work, rewarding them through continued learning and development, underpinned by our values of Loyalty, Care, Respect and Boldness.El-Mohandes Jotun S.A.E., established in 1983, is one of the key markets within the MEIA region. With 2 production facilities, 3 warehouses and more than 350 employees, we aim to further strengthen Jotun’s position in Egypt through ambitious market growth plans that focus on innovation, efficiency and profitability.<p>Visit our Career Page to know more about life at Jotun.</p><br><p>Jotun’s company culture welcomes and values differences in people. Our more than 10,200 employees on all continents represent 90 nationalities, four generations and diversity of professions, gender, abilities, ethnicities, beliefs, cultures etc. We are committed to represent the societies we operate in, promoting equality, equity and zero-tolerance for discrimination.</p><br><p>If you are applying to a position and require any additional support in the interview process, please let us know how we can accommodate this. &nbsp;</p><br><p>If you think that this role is what you could be doing next, apply now!</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>1-</span></span><span><span>Team Supervision:</span></span></p><br><p><span><span>·</span></span><span><span>Lead and coordinate a team of fabricators, welders, fitters, and helpers.</span></span></p><br><p><span><span>·</span></span><span><span>Allocate tasks according to production plans and priorities.</span></span></p><br><p><span><span>·</span></span><span><span>Monitor attendance, discipline, and performance.</span></span></p><br><p><span><span>2-</span></span><span><span>Production Control:</span></span></p><br><p><span><span>·</span></span><span><span>Ensure production targets and deadlines are met as per the schedule.</span></span></p><br><p><span><span>·</span></span><span><span>Coordinate with planning and quality departments for smooth workflow.</span></span></p><br><p><span><span>·</span></span><span><span>Track daily progress and report any deviations or bottlenecks.</span></span></p><br><p><span><span>3-</span></span><span><span>Quality Assurance:</span></span></p><br><p><span><span>·</span></span><span><span>Ensure work is carried out as per approved drawings, specifications, and quality standards.</span></span></p><br><p><span><span>·</span></span><span><span>Coordinate with QC for inspections and approvals.</span></span></p><br><p><span><span>·</span></span><span><span>Take corrective actions on non-conformities.</span></span></p><br><p><span><span>4-</span></span><span><span>Safety &amp; Compliance:</span></span></p><br><p><span><span>·</span></span><span><span>Enforce adherence to health and safety regulations.</span></span></p><br><p><span><span>·</span></span><span><span>Ensure team members use PPE and follow safe working practices.</span></span></p><br><p><span><span>5-</span></span><span><span>Resource Management:</span></span></p><br><p><span><span>·</span></span><span><span>Monitor use of materials, tools, and equipment to minimize waste.</span></span></p><br><p><span><span>·</span></span><span><span>Request materials and resources in a timely manner to avoid delays.</span></span></p><br><p><span><span>6-</span></span><span><span>Problem Solving:</span></span></p><br><p><span><span>·</span></span><span><span>Address issues related to manpower, equipment breakdowns, or quality concerns.</span></span></p><br><p><span><span>·</span></span><span><span>Escalate critical problems to the Production Manager with suggested solutions.</span></span></p><br><p><span><span>7-</span></span><span><span>Documentation:</span></span></p><br><p><span><span>·</span></span><span><span>Maintain shift reports, production logs, and manpower records accurately.</span></span></p><br><br><br><p><span><span>Support documentation for audits and certifications (e.g., ISO, welding certifications).&nbsp;</span></span></p><br> <p><span><span><strong>Minimum</strong></span></span></p><br><br><p><span><span>- </span></span><span><span>Years of experience:</span></span></p><br><p><span><span>3-5</span></span></p><br><br><p><span><span>- Academic Qualifications:</span></span></p><br><p><span><span>Bachelor’s degree of Engineering</span></span></p><br><br><p><span><span>- Professional Certificates:</span></span></p><br><br><p><span><span>- Language proficiency:</span></span></p><br><p><span><span>Intermediate at English</span></span></p><br><br><p><span><span>- Computer skills:</span></span></p><br><p><span><span>MS Office</span></span></p><br><br><br> </div>

About Biscato<br>For over 50 years, Biscato for Food Industries S. A. E. has been part of the food industry, building a legacy of quality, trust, and delicious products. Throughout our journey, we have remained committed to delivering high-quality biscuits that generations of consumers have enjoyed and trusted. Today, as we continue to grow and evolve, we remain driven by the same commitment to quality, food safety, innovation, and continuous improvement. At Biscato, we believe that behind every great biscuit is a passionate team, strong processes, and a commitment to excellence at every stage of production.<br>We are looking for a passionate and detail oriented IPC Quality Engineer to join our Quality team.<br>The successful candidate will play a key role in monitoring and controlling quality throughout the production process, ensuring that every product meets our established quality and food safety standards.<br>Key Responsibilities:<br> Monitor and control quality throughout all stages of the production process. Conduct in-process inspections and quality checks. Ensure compliance with product specifications and quality standards. Identify and report deviations and non-conformities. Take immediate action and escalate quality issues when necessary. Ensure compliance with GMP, GHP, HACCP, and food safety requirements. Support Root Cause Analysis and corrective actions for quality-related issues. Maintain accurate quality records and reports. Collaborate closely with Production and other departments to drive continuous improvement.<br>Qualifications:<br> Bachelor’s degree in Food Science, Agriculture, Chemical Engineering, or a relevant field. Experience in Quality Control or IPC within the Food Manufacturing industry is preferred. Good knowledge of GMP, GHP, HACCP, and Food Safety standards. Strong attention to detail and observation skills. Good analytical and problem-solving abilities. Ability to work effectively in a fast-paced manufacturing environment. Strong communication and teamwork skills.

<p><strong>1. Process Optimization &amp; Workflow Management</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Streamline Operations: </strong>Analyze and map contemporary jewelry manufacturing workflows (from Jewelry Bench and casting to soldering, plating, and stone-setting) to eliminate structural bottlenecks and reduce total turnaround lead times.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Capacity Planning &amp; Scheduling: </strong>Balance, track, and optimize daily factory production loads to dynamically meet retail boutique stocks, e-commerce fulfillment, and strict seasonal campaign deadlines.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Standard Operating Procedures (SOPs): </strong>Develop, document, and enforce standard work instructions for bench jewelers, artisans, and finishing technicians to achieve absolute design repeatability.</p><p><strong>2. Quality Assurance &amp; Precious Material Control</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Quality Gates: </strong>Establish and govern strict quality control checkpoints throughout the end-to-end production cycle to catch and minimize defects long before final polishing.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Precious Metal Reconciliation: </strong>Implement rigorous tracking systems to monitor fine metal scrap, refining losses, and chemical consumption, ensuring absolute accountability for gold, silver, and brass stocks.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Root Cause Analysis: </strong>Investigate recurring design defects or structural vulnerabilities in finished pieces and implement permanent mechanical or process corrective actions.</p><p><strong>3. Equipment, Maintenance &amp; Safety</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Asset Management: </strong>Oversee the preventive maintenance, calibration, and operational uptime of factory machinery (e.g. induction casting machines, polishing lathes, laser welders, and electroplating tanks).</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Safety &amp; Environmental Compliance: </strong>Enforce strict health and safety protocols, specifically covering chemical handling in plating areas, hazardous waste disposal, and micro-particle ventilation systems in polishing rooms.</p><p><strong>4. Costing &amp; Cross-Functional Design Collaboration</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Product Costing &amp; BOM: </strong>Partner intimately with the Design and Finance teams to compile accurate Bill of Materials (BOM), calculating chemical, metal, and labor costs for upcoming collections.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <strong>Design for Manufacturing (DFM): </strong>Collaborate with creative designers early in the lifecycle to ensure complex, avant-garde jewelry concepts can be reliably and efficiently mass-produced without compromising artistic integrity.</p><p><strong>Requirements</strong></p><p><strong>Education &amp; Experience</strong></p><p>·&nbsp; <strong>Education: </strong>Bachelor’s degree in Production Engineering, Industrial Engineering, Mechanical Engineering, or a closely related manufacturing discipline.</p><p>·&nbsp;&nbsp;<strong>Experience: </strong>3–5 years of professional experience as a Production, Process, or Industrial Engineer. <em>Experience in jewelry manufacturing is advantageous, but we highly encourage applications from engineers with backgrounds in parallel precision-driven industries.</em></p><p><strong>Technical &amp; Functional Competencies</strong></p><p>·&nbsp;&nbsp;&nbsp;<strong>Methodologies: </strong>Strong operational understanding of Lean Manufacturing, Six Sigma, 5S framework, and Total Productive Maintenance (TPM).</p><p>·&nbsp;&nbsp; <strong>Software Systems: </strong>Proficiency in utilizing ERP/MRP systems for production tracking, routing, and inventory forecasting.</p><p>·&nbsp;&nbsp;&nbsp;<strong>Data Literacy: </strong>Advanced analytical capacity; advanced Excel/Google Sheets modeling skills are strictly required.</p><p></p><p></p>

<p>Join EVA Pharma, a leading pharmaceutical company dedicated to empowering the fight for Health and well-being as a fundamental human right. Recognized and certified as a best place to work, we are committed to fostering a supportive and innovative environment for our team members. Job Summary We are seeking a passionate and talented Senior Production Specialist (Vaccine) to join our dynamic team. The ideal candidate will contribute to our mission of enhancing human health and well-being, ensuring that we meet the highest standards of excellence in our industry. Key Responsibilities: Assist in daily production activities across departments. Follow GMP and SOPs in all activities. Follow all safety protocols and procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Pharmacy. 2-4 years of experience in Pharmaceutical Manufacturing. Experience supporting vaccine processes in regulated environments. Basic understanding of GMP principles. Basic understanding of documentation practices, safety procedures, and pharmaceutical production processes. Very good English proficiency.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Join EVA Pharma, a leading pharmaceutical company dedicated to empowering the fight for Health and well-being as a fundamental human right.<br> Recognized and certified as a Best Place to Work, we are committed to fostering a supportive and innovative environment for our team members.<br> Key Responsibilities Lead all sterile production activities and ensure manufacturing targets are achieved.<br> Develop and execute production plans aligned with demand and capacity requirements.<br> Optimize productivity, reduce downtime, and improve operational efficiency.<br> Ensure compliance with cGMP, FDA, ISO, and internal quality requirements.<br> Manage departmental budgets and control operational costs, along with Identifying opportunities for productivity and cost improvements Bachelor's Degree in Pharmaceutical Sciences.<br> An MBA is preferred.<br> 15+ years in pharmaceutical manufacturing, with at least 5 years in sterile production operations.<br> 3+ years in a managerial leadership role.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role Purpose: Overseeing all daily plant operations from production and manufacturing to compliance with policies and procedures. The role also involves leading Manufacturing, Operational Excellence activities by setting strategies for capacity and utilization improvement through process optimization, enhancing efficiency and cost-effectiveness.</p><p>Key Responsibilities:</p><ul><li>Oversee and organize work in production, packaging, and warehouse facilities to ensure maximum performance.</li><li>Ensure supervisors are up to date with training requirements in alignment with local and global standards.</li><li>Manage the production process in collaboration with the Planning Department, advising on schedule improvements to fulfill demand while optimizing operational efficiency.</li><li>Develop communication channels with other divisions to exchange best practices and ideas that improve overall corporate profitability.</li><li>Allocate resources effectively and fully utilize assets to achieve optimal results.</li><li>Ensure compliance with company policies to maintain high quality standards in production, packaging</li><li>Develop and maintain succession plans for all areas of responsibility to ensure sustainable performance.</li><li>Drive process improvements and machine productivity enhancements across sites to improve unit cost and employee productivity.</li><li>Set OEE (Overall Equipment Effectiveness) targets for sites based on product mix and machine capabilities to ensure regional alignment.</li><li>Manage harmonization and optimization of product composition and manufacturing processes to enhance efficiency and utilization.</li><li>Direct implementation of value stream mapping for top three products in each site to improve manufacturing cycle time.</li><li>Oversee Operational Excellence initiatives to standardize plant performance indicators.</li><li>Manage and control tech-transfer of products between sites to ensure smooth implementation and transition.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in pharmacy.</li><li>Minimum 10 years of experience in Production management sterile and solid dosage form.</li><li>Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization methodologies.</li><li>Excellent leadership, communication, and problem-solving skills.</li><li>Ability to manage multiple sites and drive operational excellence initiatives</li></ul><p></p></section>

Overview<br><br>We Are Pepsi Co<br><br>Pepsi Co is a leading name in North Africa’s food and beverage industry, where our products are enjoyed by consumers daily across the region. We offer a robust portfolio of beloved brands like PEPSI, SEVEN-UP, DORITOS, CHEETOS and CHIPSY, designed to cater to the tastes and preferences of consumers. With a focus on local sourcing, production, and distribution, Pepsi Co provides essential support to local economies and partners closely with communities throughout the region.<br><br>Guiding Vision and Regional Impact<br><br>Pepsi Co’s vision aligns with our global goal to be the Leader in Beverages and Convenient Foods by Winning with Pepsi Co Positive (pep+). This strategic transformation is committed to sustainable growth by putting people and the planet at the heart of our operations. In North Africa, this includes initiatives in responsible sourcing, waste reduction, and water conservation. Our regional programs empower local talent, boost employment, and provide support for local agriculture, particularly through partnerships with farmers and suppliers.<br><br>Empowering Our People and Communities<br><br>Our dynamic teams drive the Pepsi Co culture in North Africa, embracing diversity and collaboration to solve local challenges and create innovative products. We are dedicated to fostering an inclusive workplace, one where every individual feels valued and empowered to be themselves. This commitment extends beyond our employees to positively impact the communities we serve, striving for shared growth and a healthier, more sustainable future for all.<br><br>Diversity and Inclusion Commitment<br><br>Pepsi Co stands firmly behind our global commitment to diversity, equality, and human rights. We are proud to be an equal opportunity employer, ensuring a fair and welcoming workplace for all, regardless of age, gender, religion, disability, or any other characteristic. Our dedication to inclusion strengthens our workforce and helps drive our business forward, enriching both Pepsi Co and the communities in North Africa.<br><br>Responsibilities<br><br>Achieving KPI Targets (Production and Changeovers) Review Daily Reports through Shifts Achieving Production Plan according to the AOP according to Daily Plan with Logistics Distributing Quantities and Brands among Lines. Leading the whole Team through trainings and Instructions to achieve KPIsApplying Food Safety & Hygiene Standard & to ensure the personal and equipment safety Deliver New Hires Orientation and Training Minimizing Cost through decreasing MOH and direct cost Insuring the Quality & the Food Safety of the Product Finalizing Shift Reports and submitting it to the Production Manager Monthly Reports (Inventory Status) to the Production Manager Daily Reports to the Production Manager "Per Shift"Provide Trainings & Communication for the Daily Labors Responsible for achieving Results for the External Audits (AIB / IPS / ERP) Setting a Daily Plan with the Logistics Department Coordination with the Quality & Food Safety Department for any rising Issue Quality Wall. Coordination with the Maintenance Department to fix any Problem related to the Equipment Meeting Daily Schedules – number of products to be packed, kilo quotas to be reached Maintain Sanitation - meeting company guidelines Minimizing Waste – to maintain efficiency of operations Follow Good Manufacturing Practice (GMP) Applying M&W Management system by training FLM & PMO on how to achieve Net, True & Material Efficiencies Producing Quality Products – ensuring Frito Lay product maintains high customer appeal Drive AM Zones weekly plan and activities Conduct weekly review with Sub circle leaders to assess progress and agree on actions to apply corrective measures Update activity board results weekly<br><br>Measures:<br><br>Process Efficiency & Film Waste (Oil / Seasoning / Material) Labor Efficiency KG / man HRPackaging Efficiency. Achieving AOP. Product Quality applying to Pepsi Co Standards Delivering Daily Report (per shift) to Production Manager Delivering Monthly to the Production Manager (Inventory Status<br><br>Qualifications<br><br>Engineering Graduate (production preferred)1-2 years of Experience in the same field Computer proficiency (Excel - Word - Power Point) Communication & Leadership Skills Decision Maker & Result oriented Higher education qualification (preferred production or industrial engineering)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong>Role Purpose:</strong></p><br> <p>Overseeing all daily plant operations—from production and manufacturing to compliance with policies and procedures. The role also involves leading Manufacturing, Operational Excellence activities by setting strategies for capacity and utilization improvement through process optimization, enhancing efficiency and cost-effectiveness.</p><br> <p><strong>Key Responsibilities:</strong></p><br> <ul> <li>Oversee and organize work in production, packaging, and warehouse facilities to ensure maximum performance.</li> <li>Ensure supervisors are up to date with training requirements in alignment with local and global standards.</li> <li>Manage the production process in collaboration with the Planning Department, advising on schedule improvements to fulfill demand while optimizing operational efficiency.</li> <li>Develop communication channels with other divisions to exchange best practices and ideas that improve overall corporate profitability.</li> <li>Allocate resources effectively and fully utilize assets to achieve optimal results.</li> <li>Ensure compliance with company policies to maintain high quality standards in production, packaging</li> <li>Develop and maintain succession plans for all areas of responsibility to ensure sustainable performance.</li> <li>Drive process improvements and machine productivity enhancements across sites to improve unit cost and employee productivity.</li> <li>Set OEE (Overall Equipment Effectiveness) targets for sites based on product mix and machine capabilities to ensure regional alignment.</li> <li>Manage harmonization and optimization of product composition and manufacturing processes to enhance efficiency and utilization.</li> <li>Direct implementation of value stream mapping for top three products in each site to improve manufacturing cycle time.</li> <li>Oversee Operational Excellence initiatives to standardize plant performance indicators.</li> <li>Manage and control tech-transfer of products between sites to ensure smooth implementation and transition.</li> </ul> <p><strong>Qualifications:</strong></p><br> <ul> <li>Bachelor’s degree in pharmacy.</li> <li>Minimum 10 years of experience in Production management sterile and solid dosage form.</li> <li>Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization methodologies.</li> <li>Excellent leadership, communication, and problem-solving skills.</li> <li>Ability to manage multiple sites and drive operational excellence initiatives</li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Description</b></p><br><p><b>Work Arrangement:</b> This role is categorized as onsite. this means the successful candidate to report to the GM office full time.</p><br><p><b>The Role:</b><br>We are looking for a Production Engineer to support and improve assembly operations within our CKD manufacturing environment. The role is responsible for ensuring smooth production flow, optimizing line performance, reducing downtime, and maintaining high standards of quality, safety, and efficiency. The ideal candidate will work closely with manufacturing, quality, maintenance, and planning teams to drive continuous improvement and achieve daily production targets.</p><br><p><b>What You'll Do:</b></p><br><ul><li><p>Responsible for the effective use of personnel, material, and equipment.</p><br></li><li><p>Participates in the training, developing, and evaluating of hourly team members.</p><br></li><li><p>Participates in the development of highly effective teams.</p><br></li><li><p>Leads Global Manufacturing Systems (GMS) processes and serves as resource supporting launch and pilot activities in assigned areas.</p><br></li><li><p>Meets or exceeds production cost schedule and maintains quality requirements.</p><br></li><li><p>Maintains awareness of quality standards, and communicates department quality goals, and leverages resources to solve quality issues.</p><br></li><li><p>Builds and maintains good working relationships with employees, and management.</p><br></li><li><p>Understands and consistently administer the National and Local Agreements of General Motors. Implements and follows systems that prevent re occurrence of known issues.</p><br></li><li><p>Promote safe work practices and achieve objectives for ergonomics, health and safety and housekeeping. Motivates, trains and develops employees to effectively perform their jobs utilizing standardized methods.</p><br></li><li><p>Ensure team members receive adequate JIT (job instruction training).</p><br></li><li><p>Achieve production schedules and product requirements by applying lean manufacturing/synchronous principles with emphasis on variation reduction, control costs, and achieve productivity improvements.</p><br></li><li><p>Coach, teach, counsel and mentor Group Leaders in these responsibilities.</p><br></li></ul><p><b>Your Skills &amp; Abilities (Required Qualification)<br>Educational and Experience Background:</b></p><br><ul><li><p>Bachelor’s degree in Production engineering, Mechanical Engineering, Industrial Engineering or any related engineering degree.</p><br></li><li><p>Minimum 5 years of experience in industrial engineering, continuous improvement, or operational excellence.</p><br></li><li><p>Strong knowledge of production processes, process optimization, and manufacturing best practices.</p><br></li><li><p>Excellent communication and stakeholder management skills.</p><br></li><li><p>Experience in the Body shop assemblies in automotive fields (welding, riveting, metal finishing) is preferred.</p><br></li></ul><p><b>Technical Skills:</b></p><br><ul><li><p>Production line balancing and manpower balancing to maintain smooth flow and hit output targets.&nbsp;</p><br></li><li><p>Strong knowledge of assembly processes, workstation design, and production workflow improvement.&nbsp;</p><br></li><li><p>Takle and solve daily production constraints though effective root cause analysis utilizing tools like 5 whys, fishbone, A3 problem solving.</p><br></li><li><p>Lean manufacturing, waste elimination, and throughput improvement utilizing six sigma tools and methodologies (DMAIC, Basic statistical analysis).</p><br></li><li><p>Ability to identify and eliminate waste and knowledge of waste types.</p><br></li><li><p>Quality control and process validation, including basic quality tools and understanding of PFMEA / quality systems.&nbsp;</p><br></li><li><p>Layout, material flow, and documentation skills using tools such as AutoCAD, Teamcenter, and MS Project.&nbsp;</p><br></li><li><p>Ergonomics assessment and continuous improvement of operations for safety and efficiency.&nbsp;</p><br></li><li><p>Troubleshooting and analytical problem-solving in manufacturing operations.&nbsp;</p><br></li><li><p>Basic process automation or reporting skills, such as Power BI, as an added advantage.&nbsp;</p><br></li><li><p>Good understanding of workplace safety and standardized work in a manufacturing environment.&nbsp;</p><br></li></ul><p><b>Competencies:</b></p><br><ul><li><p>Strong communication and clear reporting/storytelling with cross-functional teams.&nbsp;</p><br></li><li><p>Problem-solving, analytical thinking, and sound decision-making.&nbsp;</p><br></li><li><p>Project planning, workload management, and ability to handle multiple assignments with autonomy.&nbsp;</p><br></li><li><p>Teamwork and collaboration across diverse, multi-disciplinary stakeholders.&nbsp;</p><br></li><li><p>Leading with influence, coaching others, and driving team performance.&nbsp;</p><br></li><li><p>End-to-end process management and continuous improvement mindset.&nbsp;</p><br></li><li><p>Change management and adaptability to improve current processes and introduce new ways of working.&nbsp;</p><br></li><li><p>Accountability, initiative, and ability to work independently in a fast-paced environment.&nbsp;</p><br></li><li><p>Compliance and safety orientation.</p><br></li></ul><br>&amp;#xa;&amp;#xa;&amp;#xa;&amp;#xa;<p><b>About GM</b></p><br><p>Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.</p><br><p><b>Why Join Us&nbsp;</b></p><br><p>We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.</p><br><p><b>Non-Discrimination and Equal Employment Opportunities</b></p><br><p>General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.<br>We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit<span><b>How we Hire</b></span>.</p><br><p><b>Accommodations</b></p><br><p>General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, <span><b>email</b></span>us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.</p><br> </div>

Company Description ECB is a fast-growing engineering and consultancy firm established in 1997, with a multidisciplinary platform serving diverse sectors. The company combines deep knowledge of Egypt’s market with international exposure to deliver client-oriented solutions. ECB is recognized for its strong track record in design, site supervision, and project management. Its management system meets ISO 9001:2015 requirements, reflecting a commitment to quality and continuous improvement. Team members benefit from a professional environment focused on technical excellence and sustainable growth.<br>Role Description This is a full-time, on-site Production Lines Sales Engineer role based in Cairo, Egypt. The Production Lines Sales Engineer will identify and pursue sales opportunities for production line solutions, prepare technical and commercial proposals, and conduct product demonstrations and presentations to prospective clients. The role involves understanding customer requirements, coordinating with engineering teams to develop tailored solutions, and providing ongoing technical support before and after sales. The engineer will manage client accounts, follow up on inquiries, negotiate contracts within company guidelines, and ensure high levels of customer satisfaction. Daily tasks also include maintaining accurate sales documentation, tracking market trends, and collaborating with internal stakeholders to achieve sales targets.<br>Qualifications<br> Strong Sales Engineering and Technical Support skills, with the ability to translate technical features into business value. Proficiency in Sales and Customer Service, including lead generation, account management, and relationship building. Excellent Communication skills, both written and verbal, for engaging with clients and internal teams. Bachelor’s degree in Engineering (Mechanical, Industrial, or related field) or an equivalent technical discipline. Experience with production lines, industrial equipment, or manufacturing environments is highly beneficial. Ability to read and interpret technical drawings and specifications, and work collaboratively with design and project teams. Strong analytical, negotiation, and problem-solving abilities, with a focus on meeting client needs and achieving sales goals. Proficiency in MS Office and relevant CRM tools; fluency in English and Arabic is an advantage.

Company Description Stein Crane Systems is a global leader in material handling solutions, serving customers across industries such as automotive, oil and gas, power, chemical, logistics, steel and concrete, mechanical and plant engineering, road transport, pharmaceutical, and food. The brand is known for reliable, safe hoists, crane components, and methodical engineering solutions, assembled with high-quality parts from professional suppliers. All products are manufactured in accordance with The European Materials Handling Federation (FEM) standards, including FEM Hoist Duty Classifications. Stein Crane Systems offers innovative products such as electric wire rope hoists, crane end trucks, double rail crane trolleys, complete crane kits, and crane components. Based in Egypt, the company exports to Russia, Africa, the Middle East, Asia, and beyond, and employs more than 100 experienced crane professionals, including engineers. Role Description Supervise the production line for low-voltage panels and electrical cranes/hoists Ensure panels are manufactured according to drawings and technical specifications Enforce quality and safety standards throughout the manufacturing process Troubleshoot daily technical issues on the production line Coordinate with the design, quality, and maintenance departments Supervise the technician team and assign tasks Qualifications Bachelor's degree in Electrical Engineering (Power/Control)1–3 years of experience in industrial manufacturing or low-voltage panels Proficiency in Auto CAD (electrical drawings) Strong ability to read electrical drawings and control panel schematics Good knowledge of LV panel components (circuit breakers, contactors, PLCs, etc.) Ability to work under pressure and manage a team Alexandria residence is a Must.

<p><strong>Key Responsibilities &amp; Job Duties</strong></p><p><strong>1. Production Planning &amp; Follow-Up</strong></p><ul><li><p>Track the daily progress of 100+ styles from initial sample development through final packing.</p></li><li><p>Create and update detailed production tracking sheets to ensure strict adherence to target delivery dates.</p></li><li><p>Monitor embroidery, printing, and garment finishing processes closely to prevent errors and delays.</p></li></ul><p><strong>2. Vendor &amp; Supplier Management</strong></p><ul><li><p>Coordinate with local fabric, accessory, printing, and embroidery suppliers on order specifications and delivery schedules.</p></li><li><p>Negotiate timelines and resolve operational bottlenecks directly with vendors to maintain smooth workflow.</p></li><li><p>Evaluate vendor quality and reliability, actively sourcing backup suppliers when necessary.</p></li></ul><p><strong>3. Quality Control &amp; Material Management</strong></p><ul><li><p>Inspect incoming raw materials, fabrics, and trims to verify they match approved specifications and tech packs.</p></li><li><p>Conduct regular on-site or in-house quality checks during cutting, stitching, printing, and embroidery stages.</p></li><li><p>Ensure wastage is minimized and all defective items are identified and rectified immediately.</p></li></ul><p><strong>4. Interdepartmental Coordination</strong></p><ul><li><p>Collaborate closely with the Design and Pattern-Making teams to resolve technical production challenges early.</p></li><li><p>Partner with Purchase and Inventory teams to ensure all required accessories and fabrics are delivered on time.</p></li><li><p>Provide regular status reports to the Production Manager highlighting delays, risks, and proposed solutions.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Required Qualifications:</strong></p><p>-Graduate of <strong>Faculty of Applied Arts, Home Economics, or a related field</strong>.</p><p>-Previous experience in <strong>production follow-up</strong>, preferably with good knowledge of <strong>embroidery and printing</strong>.</p><p>-Good awareness of <strong>fabrics and accessories</strong> and their production requirements.</p><p>-Good knowledge of <strong>local suppliers</strong> and the ability to coordinate and follow up with them.</p><p>-Able to handle and organize <strong>100+ styles</strong> efficiently.</p><p>-Strong <strong>communication and teamwork skills</strong>.</p><p>-Organized, responsible, and able to follow up on multiple tasks simultaneously.</p><p>-Professional and decent personality with good interpersonal skills.</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description Manage and supervise the Production Maintenance team, setting clear KPIs for machine uptime, defining technical responsibilities, and monitoring shift performance to minimize Mean Time to Repair (MTTR). Develop team capabilities through targeted technical training specifically in PLC logic, robotics, hydraulics, and pneumatics identifying skill gaps to ensure the team can handle complex automated systems. Lead the execution of preventive, predictive (CBM), and corrective maintenance specifically for manufacturing assets, CNC machinery, assembly lines, and specialized tooling to ensure 24/7 operational readiness. Oversee the delivery of critical production utilities (compressed air, high-pressure steam, industrial cooling, and power distribution) at the machine level, ensuring supply consistency and energy efficiency through direct management or vendor SLAs. Drive strict adherence to manufacturing standards and Lean methodologies, serving as the lead for Lean Total Productive Maintenance (LTPM) to foster operator-led maintenance and continuous improvement culture. Monitor Overall Equipment Effectiveness (OEE) and real-time process performance; identify bottlenecks, reduce scrap rates, and implement engineering solutions for enhanced throughput and cycle-time optimization.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Bachelor s degree in Engineering (Mechanical, Electrical, or Mechatronics). Experience: +3 years of experience in a maintenance leadership or senior technical role, Strong background in the Automotive industry or Wiring Systems is highly preferred. Language: Full Professional English Proficiency ; must be able to document technical processes and communicate effectively with management. Core Skills: Technical Management: Proven ability to lead maintenance technicians and coordinate complex task lists. LTPM &amp; Lean Tools: Practical experience in implementing Lean Total Productive Maintenance to reduce downtime. Vendor Coordination: Skilled in managing external service providers and technical contractors.</p><p></p></section>

About us:Elsewedy Electric: Powering Progress, Empowering People.<br>For over 80 years, Elsewedy Electric has been a leading manufacturer of electrical products and solutions, operating in 19 countries with over 18,000 employees. We offer a diverse range of products across wire & cable, electrical equipment, engineering & construction, digital solutions, and infrastructure investments. Beyond our manufacturing prowess, we're passionate about creating a positive and empowering work environment for our team. We foster a culture of diversity, inclusion, and continuous learning, providing opportunities for professional development and career growth. Our commitment to employee well-being extends beyond compensation with initiatives promoting work-life balance and overall well-being. Join us and be part of a company that's not just powering progress, but empowering people to build a brighter future.<br>This job opportunity is offered by ELSEWEDY ELECTRIC Graduate Development Program The program is designed for Graduates with 0-2 years' of experience. The program offers various job rotations, mentorships, coaching & trainings.<br>Job Responsibilities:Monitor production, troubleshoot issues, analyze data, and implement process enhancements to increase efficiency, quality, and safety. Support to the production team and helps execute the company's manufacturing strategy under the guidance of more experienced engineers. Collect and analyze production data to uncover bottlenecks, quality issues, and optimization opportunities. Assisting with the implementation of process changes and improvements. Troubleshooting equipment malfunctions and production problems. Supporting maintenance activities and preventive maintenance programs. Participating in the development of standard operating procedures, work instructions, and training materials. Collaborating with cross-functional teams to enhance manufacturing processes. Identifying and evaluating new technologies, tools, and methods to enhance production.<br>Job Qualifications:Education: Bachelor's degree of Science in Chemistry. Years of Experience: 0–2 years of experience Language proficiency: Good command of English