Network Engineer Jobs - Cairo Egypt

Senior Mechanical Engineer (HVAC + Fire Protection + Plumbing) We are seeking an experienced Senior Mechanical Engineer to lead the design and delivery of HVAC, Fire Protection (FPR), and Plumbing (PLD) systems for complex and themed environments. The role involves end-to-end responsibility from concept design through construction and commissioning, with strong coordination across multidisciplinary teams. Key Responsibilities1. HVAC System Design & Engineering Review and design HVAC systems for indoor and semi-outdoor themed environments, ensuring thermal comfort, indoor air quality, and acoustic performance. Perform load calculations, system sizing, and duct routing in coordination with architectural, structural, and show constraints. Select HVAC equipment, define control strategies, and ensure compliance with energy efficiency and sustainability goals.2. Fire Protection (FPR) Systems Review, design, and specify fire protection systems including sprinklers, water mist, and special hazard systems. Ensure full compliance with NFPA, SBC, and local authority requirements. Coordinate with AHJs, fire consultants, and authorities for approvals, permits, and inspections.3. Plumbing (PLD) Systems Review and develop plumbing system layouts including water supply, drainage, venting, and specialty piping. Specify fixtures, pumps, tanks, interceptors, and treatment systems. Address unique requirements such as themed water features, interactive installations, and non-standard utilities.4. BIM Modeling & Documentation Lead the development of 3D mechanical models (HVAC, FPR, PLD) using Revit. Prepare coordinated construction documentation including drawings, schematics, and details. Manage clash detection and coordination with architectural, structural, and show systems.5. Code Compliance & Engineering Standards Ensure compliance with SBC, ASHRAE, NFPA, IPC, and other applicable standards. Develop technical specifications and design narratives for client reviews and permitting. Stay updated on environmental, health, safety, and energy efficiency regulations.6. Design Coordination & Integration Collaborate closely with architects, creative teams, and engineers to integrate MEP systems within scenic and show-driven environments. Translate creative concepts into technically sound and buildable designs. Participate in interdisciplinary design reviews and coordination meetings.7. Construction Administration & Site Support Review submittals, RFIs, and shop drawings. Conduct site inspections and support testing and commissioning activities. Coordinate with contractors and vendors to resolve construction issues.8. Project Leadership & Team Management Mentor junior engineers and BIM designers. Manage schedules, workloads, and deliverables across multiple projects. Maintain organized documentation, revisions, and version control.9. Quantity Take-Off & BOQ Support Provide mechanical quantities, equipment lists, and material specifications. Assist with technical evaluation of bids, alternates, and vendor proposals.10. QA/QC & Best Practices Perform internal quality reviews for constructability, compliance, and performance. Apply lessons learned and company standards to enhance project outcomes. Ensure system reliability, maintainability, and lifecycle efficiency. Required Skills Leadership of HVAC, Fire Protection, and Plumbing system design from concept through construction. Strong BIM coordination and multidisciplinary clash resolution. Technical leadership during design, documentation, and site execution. Experience mentoring engineers and managing consultants and vendors. Technical Knowledge Strong command of SBC, ASHRAE, NFPA, IPC, and relevant international standards. Advanced understanding of MEP system performance in extreme climate conditions. Lifecycle-based mechanical design with a focus on sustainability and energy efficiency. Personal Attributes Strategic thinker with strong problem-solving skills. Excellent communication and cross-disciplinary collaboration abilities. Quality-driven with a strong commitment to safety and code compliance. Proactive, adaptable, and effective in fast-paced, multicultural environments. Education Bachelor’s Degree in Mechanical Engineering

Company Description EAST (Engineering and Services Technology) is a joint stock company that has been providing innovative engineering solutions and services for over 60 years. Originating as a family-owned business in construction and road-building, EAST now operates in prominent infrastructure, energy, and industrial sectors. The organization is structured into three business sectors: E_Roads, focusing on road-related plants and machinery; E_RAIL, specializing in rail and track machinery and products; and E_Industries, delivering industrial engineering solutions. EAST is dedicated to meeting the needs of local and regional markets with exceptional expertise and high-quality offerings.<br> Qualifications<br>"Bachelor's degree in Electrical Engineering, Mechatronics Engineering, or a related discipline is Must."."<br>Strong expertise in Proposal Preparation and Proposal Writing A solid foundation in Electrical Engineering and the ability to apply technical knowledge effectively Experience in Sales and the ability to support business development activities Proficiency in Procurement processes and supply chain management Excellent communication, organization, and time management skills Bachelor's degree in Engineering, preferably in Electrical or a related discipline Previous experience in infrastructure, energy, or industrial sectors is a plus Proficiency in MS Office and proposal management software is advantageous

????️ We’re Hiring | Site Civil Engineer Parcel Construction is seeking a qualified Civil Site Engineer to join our team.5th settlement - new cairo Requirements✔ Bachelor's degree in Civil Engineering✔ 2–3 years of experience in construction projects✔ Experience in residential and commercial projects is preferred✔ Good knowledge of site execution, supervision, and project coordination✔ Ability to monitor progress, quality, and subcontractor activities What We Offer✨ Competitive salary package✨ Professional work environment✨ Career growth opportunities???? Send your CV to hr@parceleg.comSubject: Parcel Site Engineer

Job Summary:We are seeking experienced QC Engineers (Civil & Mechanical) to join our team and support the successful delivery of major Energy and Infrastructure projects across Egypt.<br>Key Responsibilities:✔ Conduct inspections to ensure construction and installation activities comply with project specifications, approved drawings, and quality standards.✔ Review material submittals, method statements, inspection requests, and quality documentation.✔ Coordinate inspections with clients, consultants, and third-party inspectors.✔ Prepare and maintain quality records, inspection reports, NCRs, and corrective action reports.✔ Monitor civil and mechanical works to ensure compliance with applicable codes, standards, and project requirements.✔ Participate in testing, commissioning, and project handover activities.✔ Support quality audits and continuous improvement initiatives.✔ Ensure all quality-related activities are properly documented and reported.<br>Qualifications & Requirements:???? Bachelor's Degree in Civil Engineering/Mechanical Engineering.???? Minimum 5 years of experience in QA/QC within EPC, Energy, Utilities, Power, Industrial, or Infrastructure projects.???? Strong knowledge of quality management systems, inspection procedures, and international standards.???? Experience in reviewing QA/QC documentation, inspection reports, and project quality records.???? Strong communication, coordination, and reporting skills.???? Membership of the Egyptian Engineers Syndicate is preferred.<br>If interested, please send your updated resume in a PDF format to: jobs@madkour.com.eg mentioning the job title in the e-mail subject.

Role Overview<br><br>We are seeking a Senior Storage Engineer to lead operational, testing, and documentation activities across enterprise storage and networking infrastructure, with a primary focus on Dell EMC Power Flex, Dell EMC Power Max (PMAX), and Dell Switches. The ideal candidate will be hands-on with operational tasks, resilience/failure testing, performance tuning, and producing high-quality technical documentation (SOPs, LLDs, and diagrams).<br><br>Key Responsibilities<br><br>Core Platforms<br><br>Perform day-to-day operational tasks on Power Flex, PMAX, and Dell Switches Produce and maintain technical diagrams and documentation using Visio<br><br>PMAX - Testing & Validation<br><br>Create and restore snapshot copies Simulate port/path failures and validate host multipathing behavior (e.g., cable removal scenarios) Test single power supply failure scenarios (e.g., power cable removal) and validate system resilience Export and restore Unisphere configuration backups Confirm alert visibility and accuracy within the Unisphere dashboard (e.g., validating power failure alerts)<br><br>PMAX - Operational Documentation (SOPs)<br><br>Develop and maintain Standard Operating Procedures covering:<br><br>Recovery procedure validation (volume recreation, masking remapping) Capacity utilization monitoring New volume creation LUN masking and mapping Unmasking and deletion of volumes Configuration of service levels (Diamond/Platinum/Gold/Silver) Performance monitoring (per box, per LUN, per host) Patch installation procedures Configuration file backups Log collection procedures<br><br>PMAX - Additional Technical Tasks<br><br>Debug and troubleshoot syslog configuration between PMAX and the client syslog server Document LUN-per-port mapping as part of Low-Level Design (LLD) deliverables Review LUN-per-port mapping for Front-End port load balancing Review PMAX ports for errors and performance issues<br><br><br>Requirements<br><br>Required Skills & Qualifications<br><br>Proven hands-on experience with Dell EMC Power Max (PMAX) administration and operations Experience with Dell EMC Power Flex in operational/support capacity Working knowledge of Dell networking/switching infrastructure Strong understanding of SAN concepts: multipathing, LUN masking/mapping, snapshots, service levels Experience with Unisphere for Power Max management Proficiency in Visio for technical documentation and diagramming Strong documentation skills — able to write clear, structured SOPs and LLDsExperience with syslog configuration and troubleshooting Familiarity with performance monitoring and capacity planning on enterprise storage arrays<br><br>Preferred Qualifications<br><br>Dell EMC certifications (e.g., Power Max, Power Flex specialist certifications) Prior experience in a client-facing or managed services environment Experience supporting telecom or large enterprise environments

About the role:SBS Protech is looking for a Technical Sales Engineer to support our business growth across Fire & Gas, Fire Alarm, and Industrial Safety Systems projects within the Oil & Gas, Industrial, Energy, and Infrastructure sectors.<br>Main Responsibilities:Develop new business opportunities and generate qualified leads. Build and maintain relationships with clients, consultants, and EPC contractors. Prepare technical and commercial proposals. Participate in tendering and contract negotiation activities. Coordinate with engineering and project teams to develop customer solutions. Achieve assigned sales targets and support market expansion initiatives. Monitor market trends and competitor activities.<br>Key Requirements:Bachelor's Degree in Electrical, Electronics, Instrumentation & Control, Mechatronics, or a related Engineering discipline. Minimum 3 years of experience in Technical Sales, Business Development, Tendering, or Proposal Engineering. Experience with Fire & Gas Systems, Fire Alarm Systems, Gas Detection Systems, or Industrial Safety Solutions. Experience dealing with EPC contractors, consultants, and industrial clients. Strong proposal preparation, tendering, and negotiation skills. Excellent communication and relationship management abilities.<br>To apply, please send your updated CV to: youssef.akram@sbsprotech.comEmail Subject: SAL-TSE-BF-ENG-0626-015

Company Description DABS (Design & Build Services) is a fast-growing engineering firm founded in 2008 by Egyptian design professionals with extensive experience across the MENA region. The company delivers architectural, engineering, construction, and management services for projects of varying sizes and complexities. DABS has expanded its multidisciplinary team to include numerous design specialists across several technical disciplines. Leveraging broad regional experience and exposure to diverse markets and cultures, the firm is closely aligned with international standards and best practices. Candidates joining DABS can expect a professional environment focused on quality, innovation, and integrated project delivery.<br>Immediate hiring is a must, This job is open for unemployed engineers<br>Role Description The architectural Technical Office Engineer is a full-time, on-site role based in Cairo, Egypt. The role involves preparing, reviewing, and coordinating shop drawings with design documents, project specifications, and site conditions. Responsibilities include assisting in the preparation and review of Bills of Quantities (BOQs), supporting quantity take-offs, and validating material quantities against project requirements. The Technical Office Engineer will collaborate with civil, electrical, and other engineering teams, coordinate with site engineers and subcontractors, and help resolve technical issues arising during execution. The role also involves maintaining accurate technical documentation, supporting tender and variation submissions, and ensuring that all work complies with project standards, codes, and client expectations.<br>Qualifications • Bachelor’s degree in Architectural/Civil Engineering or a related engineering discipline. Strong proficiency in preparing, reviewing, and coordinating shop drawings, ensuring alignment with design and site requirements. Solid experience in BOQ preparation, quantity take-offs, and quantity surveying tasks for construction projects. Foundational understanding of Electrical Engineering systems relevant to building and infrastructure projects. Proficiency in relevant engineering and drafting software (e.g., Auto CAD; Revit or similar tools is an advantage). Strong analytical, problem-solving, and documentation skills, with high attention to detail and accuracy. Ability to coordinate effectively with multidisciplinary teams, manage time efficiently, and handle multiple tasks in a fast-paced environment. Previous experience in consultancy, contracting, or design-build environments in the MENA region is a plus. Good command of English and Arabic, both written and spoken.

Established in 2008, Geidea epitomizes customer focused empowerment and commercial success through continuous innovation. Geidea makes best in class digital payment solutions available for all by attracting and leveraging the best creative & entrepreneurial talent in the market Our solutions give any business the chance to get ahead and reach for more no matter their size or maturity. Our technology mirrors our people - Smart, Innovative & Forward Thinkingwww.geidea.net<br><br>To maintain a competitive advantage as we grow, we are currently looking for a new " Senior Data Engineer"<br>.<br>Job purpose: to maintain a competitive advantage as we grow, we are looking for a highly skilled Senior Data Engineer to design, develop, and optimize scalable, secure, and high-performance data platforms across the enterprise. This role will play a key part in building and maintaining the data ecosystem that supports our Fintech services, including real-time financial transactions, credit scoring models, regulatory reporting, and customer analytics. The Senior Data Engineer will work closely with Data Architects, Software Engineers, Product Teams, and Data Analysts to develop modern data solutions leveraging Big Data technologies, Data Lakes, ELT/ETL pipelines, and Cloud Data Warehouses while ensuring reliability, security, governance, and regulatory complianc<br>e.<br>Responsibilities:Data Engineering & Platform Development Design, build, and maintain scalable data pipelines for batch and real-time data processing. Develop and optimize data ingestion frameworks from internal and external data sources. Implement and maintain data models to support analytics, reporting, and operational use cases. Collaborate with Data Architects to translate architectural designs into production-ready solutions. Big Data & Distributed Processing Develop and maintain large-scale data processing solutions using technologies such as Apache Spark, Databricks, Flink, Trino, or Presto. Build and optimize distributed data processing workloads handling high-volume financial and behavioral datasets. Work with distributed storage systems including S3, ADLS, HDFS, and related cloud-native services. Optimize data formats such as Parquet, ORC, and Avro for performance and storage efficiency. Data Lakes & Lakehouse Solutions Build and maintain Data Lake and Lakehouse environments using technologies such as Delta Lake, Apache Hudi, or Apache Iceberg. Implement data quality, partitioning, schema evolution, and lifecycle management processes. Support data governance and metadata management initiatives across all data layers. ELT/ETL Development Design, develop, and support robust ELT/ETL pipelines using tools such as Apache Airflow, DBT, AWS Glue, Azure Data Factory, or Kafka Connect. Develop reusable and maintainable transformation logic using SQL, Python, or Scala. Ensure pipeline reliability through monitoring, alerting, logging, and automated recovery mechanisms. Optimize data processing performance and cost efficiency. Data Warehousing & Analytics Enablement Develop and maintain cloud-based data warehouse solutions such as Snowflake, Redshift, Big Query, or Synapse Analytics. Build and optimize dimensional models, fact tables, and data marts to support business intelligence and reporting requirements. Collaborate with analytics teams to ensure efficient access to trusted and governed data assets. Support integration with BI platforms such as Power BI, Tableau, and Looker. Security, Governance & Compliance Implement data security controls including encryption, masking, tokenization, and access management. Ensure compliance with SAMA, NCA, GDPR, and internal security policies. Support data lineage, auditing, and governance initiatives through integration with metadata and cataloging solutions. Participate in data quality and governance programs to ensure accuracy and consistency of enterprise data. Dev Ops & Observability Contribute to CI/CD pipelines and Infrastructure as Code implementations using Terraform, Cloud Formation, or similar tools. Implement monitoring and observability solutions for data pipelines and platforms. Establish and maintain SLAs, data quality checks, and operational dashboards using tools such as Grafana, Prometheus, or Datadog. Troubleshoot production issues and provide performance tuning recommendatio<br>ns.<br>Qualifications:Bachelor's or Master's degree in Computer Science, Data Engineering, Information Systems, or a related technical field.5+ years of experience in Data Engineering, with hands-on experience building and supporting production-grade data platforms. Strong experience with Big Data technologies such as Apache Spark, Databricks, Flink, or similar distributed processing frameworks. Proven experience building and maintaining Data Lakes, Lakehouse architectures, and cloud-based data platforms. Strong proficiency in SQL and at least one programming language such as Python, Scala, or Java. Experience developing ELT/ETL pipelines using Airflow, DBT, AWS Glue, Azure Data Factory, or equivalent tools. Hands-on experience with cloud platforms such as AWS, Azure, or GCP. Experience with cloud data warehouses including Snowflake, Redshift, Big Query, or Synapse. Understanding of data governance, security, and regulatory requirements within Fintech, Banking, or highly regulated environments. Experience working with CI/CD, Infrastructure as Code, and monitoring tools is highly prefer<br>red.<br>Our values guide how we think and act - They describe what we care about the most Customer first - It’s embedded in our design thinking and customer service approach Open - Openness allows us to constantly improve and evolve Real - No jargon and no excuses! Bold - Constantly challenging ourselves and our way of thinking. Resilient – If we fail, we bounce back stronger than before. Collaborative - We know that we can achieve a lot more as a team. We are changing lives by constantly striving for a better solu<br>tion.

Key Accountabilities: <br>Conduct comprehensive market research to identify potential projects, competitors, and key stakeholders within the construction industry. Utilize internet resources and direct visits to gather information about new construction projects, developers, and departments of military engineering authority. Identify and establish contact with project owners, electromechanical engineers, and plumbing departments to present EGIC products and services. Provide technical guidance and support to the sales team on product specifications, measurements, and installation procedures. Ensure EGIC products are included in the vendor lists of projects by submitting required documents, compliance sheets, catalogs, and samples. Negotiate and finalize agreements with construction companies for the large-scale use of EGIC products, ensuring alignment with pricing and policies. Liaise with the National Sales team to support them with sales leads and opportunities generated from project sales. Build and maintain strong relationships with contractors, consultants, and project owners to position EGIC as a preferred supplier. Follow up with customers on quotations, sales, and other inquiries to ensure customer satisfaction and maintain a positive company image. Invite key clients to visit EGIC plants to showcase products and services, fostering customer loyalty and support. Manage the daily work plan for project sales coordinators, ensuring efficient coordination and allocation of tasks. Provide guidance and support to project sales coordinators to ensure alignment with sales objectives and strategies.<br> Job Requirements:<br>Bachelor of Engineering or any relevant degree.1-3 years of experience in a relevant field. Strong technical background with knowledge of construction materials and specifications. Very Good command of English. Excellent communication, negotiation, and relationship-building skills. Ability to conduct market research, analyze data, and identify growth opportunities. Proficiency in Microsoft Office.

Egy Bell is hiring C++ Core Processing & 5G Protocol Engineer for a multinational telecommunications company.<br><br>Requirements<br>Bachelor’s degree in Computer Science, Engineering, or a related field3–10 Years of Experience Fluent English communication skills, both written and spoken Excellent working knowledge of 5G Standalone (SA) architecture: AMF, SMF, UPF, AUSF, NRF, PCF, and associated N-interfaces Deep understanding of 5G NAS (N1/N2) signalling procedures: registration, session management, handover, and authentication Strong familiarity with 3GPP TS specifications (38.xxx, 23.xxx, 29.xxx series) — able to read, interpret, and implement from raw specs, and independently pick up new or emerging 3GPP protocols with minimal hand-holding Experience with PDU decoding, x DR/CDR generation, and protocol dissection in production systems Ability to write protocol dissectors or decoders from scratch using 3GPP specs as the primary reference Working proficiency in C and Modern C++ (C++14 minimum): able to read, modify, build, and debug C++ services using CMake and Conan, and trace data flows between C++ processing engines and downstream services Unit and integration testing with Google Test or doctest, including test harnesses that replay captured protocol data to validate decoder correctness Actively uses AI coding assistants (Claude, Git Hub Copilot, or equivalent) as part of day-to-day C++ development, including for 3GPP spec interpretation and generating or refactoring protocol co Preferred qualifications:Familiarity with DPDK, pcap, or Napatech SDK for hardware-accelerated packet capture Hands-on experience decoding or implementing 5G SA protocols: NGAP (N2), GTPv2-C, and HTTP/2-based Service-Based Interface (SBI) Understanding of 4G/LTE architecture and protocols (S1AP, GTPv1-U, Diameter Gx/Gy) as a baseline Analytical thinker with strong problem-solving abilities Strong ownership and accountability Collaborative team player who communicates clearly and effectively Committed to quality, reliability, and continuous improvement Self-motivated and proactive

About Sabbour Consulting Since 1957, Sabbour Consulting has been at the forefront of engineering and design innovation across Egypt and the region. As one of the leading multidisciplinary consulting firms, we offer full-spectrum services in project management, design, supervision, and value engineering. Our commitment to excellence and technical rigor has shaped some of the most prominent infrastructure, residential, and commercial projects in the region.<br>Job Summary:Supervise and manage the installation and execution of mechanical works on-site, including HVAC, plumbing, and fire protection systems. This role is pivotal in ensuring that all mechanical systems are executed in accordance with approved drawings, specifications, and quality standards — while maintaining coordination with contractors, consultants, and multidisciplinary teams.<br>Key Responsibilities:Supervise the on-site execution of mechanical works to ensure compliance with design specifications, approved shop drawings, and project requirements. Review contractor submittals, method statements, and material approvals for compliance. Monitor daily work progress and report deviations or delays to the Site Manager. Conduct inspections and quality checks on HVAC, and firefighting, Elevators, escalators , pumps and all related systems. Coordinate with other engineering disciplines (civil, electrical, architectural) to avoid conflicts and resolve technical issues. Ensure safety protocols and site regulations are followed during mechanical installations. Attend coordination and progress meetings with contractors and consultants. Review and verify as-built drawings and project documentation submitted by contractors. Provide technical guidance and problem-solving support on-site. Prepare site reports, snag lists, and follow-up on corrective actions.<br>Qualifications & Requirements:Bachelor’s degree in Mechanical Engineering.8+ years of experience in mechanical site supervision or execution within large-scale projects. Strong understanding of mechanical systems including HVAC, plumbing, and fire protection. Familiarity with local and international codes and standards (ASHRAE, NFPA, etc.). Strong experience with project documentation and quality control procedures. Proficiency in Auto CAD, MS Office; Revit MEP and Navisworks knowledge is a plus. Ability to manage multiple contractors and ensure site coordination. Excellent communication and site reporting skills in English (Arabic is a plus). Strong leadership and team coordination abilities.

Company Description:Since 1989, DMC-CURVE has been committed to shaping a brighter future by seamlessly blending construction and urban planning with a focus on green spaces. As a trusted name in the industry, DMC-CURVE consistently delivers excellence and innovation. We take pride in crafting unique solutions that contribute to sustainable and impactful development projects.<br>Job Purpose:Follow up and execute all civil and architectural works on site. Ensure that all works are carried out according to the required schedule, specified quality standards, technical specifications, and the project’s occupational health and safety standards.<br>Tasks and Responsibilities:Review the shop drawings and discuss execution details with the direct manager (Construction Manager / Senior Site Engineer) to reach agreement. Review the required schedule with the manager and agree on a timeline for managing the execution team (site supervisors – subcontractors). Review the required resources (human resources – raw materials – equipment) with the manager and agree on a plan to provide them until the item is completed. Agree with the supervisors / the supervisor responsible for each item on the execution method and the time required to complete tasks/items. Follow up on the execution of items with supervisors and subcontractors to ensure they are carried out as required. Conduct a preliminary quantity take-off on site and coordinate with the manager to request materials and calculate waste quantities. Record productivity rates for self-performed activities. Monitor the recording and deployment of labor by supervisors periodically (daily – weekly – etc.) for the approval of monthly invoices. Coordinate with the survey engineer / surveyor to ensure that all works are executed according to the agreed coordinates and levels as per the approved shop drawings. Coordinate with safety supervisors to ensure all works are carried out in accordance with occupational health and safety standards. Coordinate with the direct manager and the quality engineer upon completion of each item to have it handed over and approved by the site consultant. Prepare a daily report covering all executed works, progress percentages, and productivity rates, and submit it to the direct manager. Perform any other tasks assigned by the direct manager within the scope of the job nature and within personal capabilities and abilities.<br>Qualifications:Bachelor’s degree in civil engineering, Construction Engineering, or a related field.2–5 years of relevant experience in construction/site engineering (or as required by the role level). Strong knowledge of construction methods, materials, and technical specifications. Good understanding of project scheduling and planning principles. Familiarity with quantity surveying and material take-off. Knowledge of occupational health and safety standards. Proficiency in engineering software (e.g., Auto CAD, MS Office; Primavera or similar is a plus). Strong communication and coordination skills. Ability to work under pressure and meet deadlines. Good problem-solving and decision-making skills.

About Sabbour Consulting:Established in 1957, Sabbour Consulting is a leading multidisciplinary engineering consulting firm with over six decades of expertise in delivering high-quality projects across Egypt and the region. Our portfolio spans infrastructure, commercial, residential, and governmental sectors, supported by a culture of technical excellence and innovation.<br>Job Purpose To design, develop, and coordinate electrical power, lighting, grounding, and telecom/low current systems in accordance with project requirements, applicable codes, and client standards, ensuring technical accuracy, constructability, and timely delivery.<br>Key Responsibilities Prepare electrical design calculations (load, short circuit, voltage drop, illumination, earthing, lightning protection). Develop electrical layouts and schematics for: medium & Low Voltage systems, power distribution, lighting (internal, external, emergency) and grounding/lightning protection systems. Prepare single-line diagrams (SLD) and panel schedules. Ensure compliance with local and international codes (IEC, NEC, BS, local authorities). Design and coordinate telecom and low current systems, including: structured cabling (Data & Voice), CCTV, Access Control, Public Address (PA), Fire Alarm Interface and IP Telephony & Network Infrastructure. Prepare system layouts, riser diagrams, and technical specifications. Coordinate designs with Architectural, Structural, and other MEP disciplines. Prepare design drawings, BOQs, technical specifications, and material submittals. Participate in design review meetings and respond to technical comments. Support tender stage by providing clarifications and value engineering proposals. Ensure all designs meet client requirements, authority approvals, and project specifications. Conduct internal design checks and ensure quality standards are maintained. Assist in resolving site technical issues during construction (as required).<br>Qualifications Bachelor’s Degree in Electrical Engineering. Professional certifications or specialized courses in electrical or telecom systems are an advantage.2-5 years of relevant experience in electrical and telecom design. Previous experience in consultancy or design offices is preferred. Experience in infrastructure, buildings, or mixed-use projects is an advantage. Proficiency in Auto CAD (Revit MEP is an advantage). Electrical calculation software (e.g., ETAP, Dialux, or equivalent). Strong knowledge of electrical & telecom design standards and codes. Ability to prepare BOQs and technical specifications. Strong analytical and problem-solving skills. Effective communication and coordination abilities. Ability to work under pressure and meet deadlines. Attention to detail and quality-focused mindset.

About Sabbour Consulting:Established in 1957, Sabbour Consulting is a leading multidisciplinary engineering consulting firm with over six decades of expertise in delivering high-quality projects across Egypt and the region. Our portfolio spans infrastructure, commercial, residential, and governmental sectors, supported by a culture of technical excellence and innovation.<br>Job Purpose Preparing accurate HVAC system designs, calculations, and drawings in compliance with project requirements, applicable codes, and company standards. The role supports coordination with other disciplines and provides technical input throughout the design and construction stages to ensure efficient, cost-effective, and sustainable HVAC solutions. <br>Key Responsibilities Prepare HVAC design drawings, schematics, layouts, and equipment schedules. Perform heating/cooling load calculations and duct sizing using approved software. Select HVAC equipment based on project requirements and manufacturer guidelines. Ensure all designs comply with relevant standards (ASHRAE, SMACNA, NFPA). Support senior engineers in developing design concepts and technical reports. Prepare BOQs and assist in specifications development. Coordinate HVAC design with electrical, plumbing, firefighting, architectural, and structural disciplines. Attend design meetings and incorporate technical feedback. Provide technical support during construction (RFIs, clarifications, site modifications). Collaborate with BIM and drafting teams to ensure accuracy of drawings. Ensure completeness and accuracy of design deliverables. Maintain updated design files, calculation sheets, and project documentation. Follow internal QA/QC procedures and design standards. Support value engineering efforts to optimize system performance and cost. Stay updated on new HVAC technologies and design tools. Participate in internal training sessions and contribute to knowledge sharing.<br>Qualifications & Requirements Bachelor’s Degree in Mechanical Engineering (HVAC specialization preferred).2–5 years of experience in HVAC design within engineering consultancy or contracting companies. Proficiency in Microsoft Office. Proficiency in HVAC design software: HAP, Revit MEP, Auto CAD, Carrier E20, or similar tools. Experience in designing HVAC systems for commercial, residential, or mixed-use projects is preferred. Strong communication and coordination skills. High attention to detail. Ability to work under pressure and meet deadlines. Analytical and problem-solving capabilities. Very good command of English (written & spoken).

Senior Mechanical Engineer (HVAC + Fire Protection + Plumbing) We are seeking an experienced Senior Mechanical Engineer to lead the design and delivery of HVAC, Fire Protection (FPR), and Plumbing (PLD) systems for complex and themed environments. The role involves end-to-end responsibility from concept design through construction and commissioning, with strong coordination across multidisciplinary teams. Key Responsibilities1. HVAC System Design & Engineering Review and design HVAC systems for indoor and semi-outdoor themed environments, ensuring thermal comfort, indoor air quality, and acoustic performance. Perform load calculations, system sizing, and duct routing in coordination with architectural, structural, and show constraints. Select HVAC equipment, define control strategies, and ensure compliance with energy efficiency and sustainability goals.2. Fire Protection (FPR) Systems Review, design, and specify fire protection systems including sprinklers, water mist, and special hazard systems. Ensure full compliance with NFPA, SBC, and local authority requirements. Coordinate with AHJs, fire consultants, and authorities for approvals, permits, and inspections.3. Plumbing (PLD) Systems Review and develop plumbing system layouts including water supply, drainage, venting, and specialty piping. Specify fixtures, pumps, tanks, interceptors, and treatment systems. Address unique requirements such as themed water features, interactive installations, and non-standard utilities.4. BIM Modeling & Documentation Lead the development of 3D mechanical models (HVAC, FPR, PLD) using Revit. Prepare coordinated construction documentation including drawings, schematics, and details. Manage clash detection and coordination with architectural, structural, and show systems.5. Code Compliance & Engineering Standards Ensure compliance with SBC, ASHRAE, NFPA, IPC, and other applicable standards. Develop technical specifications and design narratives for client reviews and permitting. Stay updated on environmental, health, safety, and energy efficiency regulations.6. Design Coordination & Integration Collaborate closely with architects, creative teams, and engineers to integrate MEP systems within scenic and show-driven environments. Translate creative concepts into technically sound and buildable designs. Participate in interdisciplinary design reviews and coordination meetings.7. Construction Administration & Site Support Review submittals, RFIs, and shop drawings. Conduct site inspections and support testing and commissioning activities. Coordinate with contractors and vendors to resolve construction issues.8. Project Leadership & Team Management Mentor junior engineers and BIM designers. Manage schedules, workloads, and deliverables across multiple projects. Maintain organized documentation, revisions, and version control.9. Quantity Take-Off & BOQ Support Provide mechanical quantities, equipment lists, and material specifications. Assist with technical evaluation of bids, alternates, and vendor proposals.10. QA/QC & Best Practices Perform internal quality reviews for constructability, compliance, and performance. Apply lessons learned and company standards to enhance project outcomes. Ensure system reliability, maintainability, and lifecycle efficiency. Required Skills Leadership of HVAC, Fire Protection, and Plumbing system design from concept through construction. Strong BIM coordination and multidisciplinary clash resolution. Technical leadership during design, documentation, and site execution. Experience mentoring engineers and managing consultants and vendors. Technical Knowledge Strong command of SBC, ASHRAE, NFPA, IPC, and relevant international standards. Advanced understanding of MEP system performance in extreme climate conditions. Lifecycle-based mechanical design with a focus on sustainability and energy efficiency. Personal Attributes Strategic thinker with strong problem-solving skills. Excellent communication and cross-disciplinary collaboration abilities. Quality-driven with a strong commitment to safety and code compliance. Proactive, adaptable, and effective in fast-paced, multicultural environments. Education Bachelor’s Degree in Mechanical Engineering

Aluminum Design Engineer – Part-Time (Cairo, Egypt) We're hiring a part-time Aluminum Design Engineer to produce shop and fabrication drawings for aluminum and façade products (pergolas, louvre systems, cladding, and architectural metalwork). Requirements:<br>3+ years in aluminum / metal fabrication drafting Advanced Auto CAD (mandatory) — clean, accurate, production-ready drawings Ability to read architectural & structural drawings and convert them to fabrication details Strong knowledge of aluminum profiles, fixing details, brackets, and cutting lists3D modeling (Rhino / Sketch Up / Revit) is a plus<br>Responsibilities:<br>Prepare 2D shop drawings, sections, and assembly details Produce cutting lists, panel schedules, and material take-offs Revise drawings based on project feedback<br>Details:<br>Part-time | Cairo-based Compensation based on experience and output<br>To apply, send your CV + portfolio (sample shop drawings).

????️ We’re Hiring | Site Civil Engineer Parcel Construction is seeking a qualified Civil Site Engineer to join our team.5th settlement - new cairo Requirements✔ Bachelor's degree in Civil Engineering✔ 2–3 years of experience in construction projects✔ Experience in residential and commercial projects is preferred✔ Good knowledge of site execution, supervision, and project coordination✔ Ability to monitor progress, quality, and subcontractor activities What We Offer✨ Competitive salary package✨ Professional work environment✨ Career growth opportunities???? Send your CV to hr@parceleg.comSubject: Parcel Site Engineer

Company Description EAST (Engineering and Services Technology) is a joint stock company that has been providing innovative engineering solutions and services for over 60 years. Originating as a family-owned business in construction and road-building, EAST now operates in prominent infrastructure, energy, and industrial sectors. The organization is structured into three business sectors: E_Roads, focusing on road-related plants and machinery; E_RAIL, specializing in rail and track machinery and products; and E_Industries, delivering industrial engineering solutions. EAST is dedicated to meeting the needs of local and regional markets with exceptional expertise and high-quality offerings.<br> Qualifications<br>"Bachelor's degree in Electrical Engineering, Mechatronics Engineering, or a related discipline is Must."."<br>Strong expertise in Proposal Preparation and Proposal Writing A solid foundation in Electrical Engineering and the ability to apply technical knowledge effectively Experience in Sales and the ability to support business development activities Proficiency in Procurement processes and supply chain management Excellent communication, organization, and time management skills Bachelor's degree in Engineering, preferably in Electrical or a related discipline Previous experience in infrastructure, energy, or industrial sectors is a plus Proficiency in MS Office and proposal management software is advantageous

<p><i>Responsibilities</i></p><p>As a member of the&nbsp;Dry Utilities team you will be responsible for:</p><ul><li>Team leader of large design teams.</li><li>Provide technical solutions within design teams.</li><li>Preparing budget, resourcing and delivering to the budget and agreed time frame.</li><li>Ultimately responsible for quality delivery.</li><li>Produces design solutions from outline briefs and correctly interprets data and communicates it to others</li><li>Undertake multi Discipline project management with experience of providing full project management and lead consultant duties.</li><li>Managing own workload and the workload of subordinates within a matrix management structure.</li><li>Active and responsible for technical growth of subordinates.</li><li>Apply Atkins Quality, Safety &amp; Environmental (QSSE) standards and Business Management System (CMS)</li></ul>

<ul><li>Supervise and manage the installation of earthing, grounding, and lightning protection systems.</li><li>Monitor site activities and ensure compliance with project specifications, drawings, and quality standards.</li><li>Coordinate with clients, consultants, subcontractors, and project teams.</li><li>Prepare site reports, progress updates, and documentation.</li><li>Plan manpower, materials, and equipment requirements for site activities.</li><li>Conduct site inspections and identify potential issues before they impact project progress.</li><li>Ensure adherence to health, safety, and environmental requirements.</li><li>Attend site meetings and provide technical support when required.</li><li>Support testing, commissioning, and project handover activities.</li><li>Track project progress and ensure timely completion of assigned tasks.</li></ul>