Mechanical Engineering Jobs - Cairo Egypt

Responsibilities:<br>Assist in the maintenance and repair of mechanical, electrical, and plumbing systems in residential, commercial, and industrial buildings. Perform routine inspections of equipment, machinery, and systems to identify potential issues or malfunctions. Support senior engineers in troubleshooting, diagnosing, and resolving technical issues with various systems and equipment. Execute preventive maintenance tasks as per the established schedules to minimize downtime and ensure the reliable operation of facilities. Maintain accurate records of maintenance activities, including work performed, materials used, and parts replaced. Assist in the installation, testing, and commissioning of new equipment and machinery. Respond to maintenance requests and perform repairs for general building systems, including HVAC, plumbing, electrical, and structural systems. Collaborate with vendors and suppliers to order parts and materials needed for repairs and installations. Maintain compliance with health, safety, and environmental regulations while performing maintenance tasks. Assist in identifying areas of improvement to increase the efficiency of maintenance procedures. Keep work areas clean and organized, ensuring tools and equipment are properly maintained.<br>Qualifications:<br>Bachelor’s degree in mechanical engineering, Electrical Engineering, or a related field. Minimum of 1-2 years of experience in maintenance engineering, preferably in a facilities or construction-related environment. Strong knowledge of building systems and equipment, including HVAC, electrical, plumbing, and mechanical systems. Basic knowledge of maintenance management software (CMMS) is a plus. Excellent problem-solving skills and the ability to troubleshoot mechanical and electrical issues. Ability to work independently or as part of a team and handle multiple tasks simultaneously. Strong attention to detail and a commitment to quality and safety. Good communication skills and the ability to report issues and collaborate with other team members effectively. Willingness to learn new skills and grow within the field of maintenance engineering.

Job Summary We are looking for an experienced Electric Forklift Maintenance Engineer responsible for the preventive and corrective maintenance, troubleshooting, repair, inspection, and commissioning of electric forklifts and material-handling equipment. The role requires strong electrical and mechanical troubleshooting capabilities and the ability to provide efficient on-site technical support. The position will focus on maximizing equipment uptime, reducing breakdowns, ensuring safety compliance, and delivering high-quality maintenance services to customers or internal operations. These responsibilities are consistent with current forklift service-engineer roles in Egypt, which emphasize preventive maintenance, fault tracing, commissioning, service reporting, and customer support. Key Responsibilities Perform preventive and corrective maintenance for electric forklifts and material-handling equipment. Diagnose and troubleshoot electrical, electronic, mechanical, hydraulic, and control-system faults. Inspect batteries, chargers, motors, controllers, contactors, sensors, wiring, braking systems, steering systems, lifting systems, and other forklift components. Conduct regular inspections and identify potential failures before they lead to equipment downtime. Perform fault tracing, repairs, component replacement, and equipment adjustments. Use appropriate diagnostic tools, electrical testing equipment, and technical manuals to identify root causes. Carry out commissioning and re-commissioning of new or repaired forklifts when required. Respond to breakdowns and service calls within agreed service timelines. Perform on-site maintenance at customer locations when required. Prepare accurate maintenance and service reports, including diagnosis, work performed, replaced parts, and recommendations. Coordinate with the spare-parts team to ensure required components are available and used efficiently. Maintain accurate maintenance records and equipment history. Identify recurring failures and recommend corrective actions to improve equipment reliability. Ensure all maintenance activities comply with company HSE and safety procedures. Maintain and properly use company tools, diagnostic equipment, vehicles, and other assigned assets. Provide technical guidance to technicians and operators when required. Communicate professionally with customers and ensure customer satisfaction after each service visit. Support continuous improvement initiatives aimed at reducing downtime and maintenance costs. Job Requirements Bachelor's degree in Electrical Engineering, Mechatronics Engineering, or a related field.2–5 years of experience in forklift, material-handling equipment, industrial equipment, or similar maintenance roles; direct electric-forklift experience is highly preferred. Strong knowledge of electrical and electronic systems. Good understanding of electric motors, batteries, chargers, controllers, sensors, contactors, and electrical circuits. Good mechanical knowledge, particularly related to forklifts and industrial equipment. Knowledge of hydraulic systems, steering, braking, and lifting mechanisms is an advantage. Ability to read and understand electrical diagrams, hydraulic diagrams, and technical manuals. Strong troubleshooting and root-cause-analysis skills. Experience using multimeters and other electrical/diagnostic tools. Good knowledge of preventive maintenance practices. Good command of English, especially technical English. Strong communication and interpersonal skills. Good planning, organization, and time-management skills. Ability to work independently and under pressure. Willingness to travel to customer sites when required. Preferred Qualifications Previous experience with electric forklifts or warehouse/material-handling equipment. Experience with brands such as Toyota, Jungheinrich, Linde, Hyster-Yale, STILL, Crown, or similar equipment. Knowledge of forklift controllers and electronic diagnostic systems. Experience with lithium-ion and lead-acid forklift batteries and charging systems. OEM technical training or certification is a plus. Knowledge of PLCs or CAN-bus-based equipment diagnostics is an advantage. HSE / electrical safety training is preferred. Key Competencies Technical Troubleshooting Electrical & Mechanical Maintenance Preventive Maintenance Root Cause Analysis Problem Solving Customer Focus Attention to Detail Time Management Teamwork Communication Skills Safety Awareness Ability to Work Under Pressure KPIsForklift equipment uptime Breakdown response time Mean Time to Repair (MTTR) Repeat breakdown rate Preventive maintenance completion rate First-time fix rate Customer satisfaction Maintenance cost per forklift Accuracy and timeliness of service reports

Steel Tech which one of well-known suppliers for welding machines, CNC Cutting machines, press brakes , and other machines tools is hiring Presales Engineers to expand team with need for immediate start . Job duties: · Collaborate with management team to craft the company’s vision and mission· search for new clients who might benefit from company products and maximize client potential. · following up with existing customer to enlarge long term relationships and fit their requirements · Achieving a number of daily contacts with customers through phone and emails.· Create Technical Documentation.· prepare technical presentations to demonstrate technical feature of our products.· providing sales support· Participate and preparing for marketing events such as exhibitions and conferences.· Creating and follow up social media campaigns. Job requirements : · Ability to creatively explain and present company product.· Will be preferable to have technical background with understanding in welding and machine tools · Excellent written and verbal communication skills· Excellent presentation and creativity skills· Engineering Bachelor degree · Major ( electronics – electrical , mechatronics , mechanical , Metallurgy )· Experience ( 1 up to 5 years )

???????? ????????'???????? ???????????????????????? " ???????????????????????????????????????? ???????????????????????????????? "<br>For a leading Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Cairo<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.<br><br>????To apply:Send your CV to s.hussein@tawzef.comkindly mention the job title in the subject line.

???????? ????????'???????? ???????????????????????? " ???????????????????????????????????????? ???????????????????????????????? "<br>For a leading Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Cairo<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.<br><br>????To apply:Send your CV to s.hussein@tawzef.comkindly mention the job title in the subject line.

????????????????'???????? ????????????????????????<br>For an established Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Cairo<br>⭐ ???????????????????????????????????????? ????????????????????????????????<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.<br> ????To apply:Send your CV to s.hussein@tawzef.comkindly mention the job title in the subject line.

????????????????'???????? ????????????????????????<br>For an established Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Cairo<br>⭐ ???????????????????????????????????????? ????????????????????????????????<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.<br> ????To apply:Send your CV to s.hussein@tawzef.comkindly mention the job title in the subject line.

Company Description Sesco Steel is a steel fabrication and industrial production network serving clients across global markets, with a structural steel fabrication capacity of 200,000 metric tonnes annually. Through three advanced facilities in Egypt and Saudi Arabia, the company delivers a diverse portfolio that includes plate works, pipes, towers, electromechanical handling equipment, semi-trailers, and specialized industrial products. Its fully automated production lines, CNC machinery, robotic systems, and ERP-integrated operations enable shorter lead times, consistent quality, and reliable project execution. Sesco Steel supports large-scale projects in industries such as oil and gas, power and energy, infrastructure, water treatment, mining, logistics, and manufacturing. The company is committed to optimized steel solutions, superior quality standards, and dependable service across regional and overseas markets.<br>Role Description The Estimation Engineer role at Sesco Steel is a full-time, on-site position based in Cairo, Egypt. The Estimation Engineer will be responsible for reviewing project specifications and drawings, preparing detailed bills of quantities (BOQs), and developing accurate cost estimates for structural steel and related fabrication works. Day-to-day tasks include analyzing material, labor, and equipment requirements, coordinating with engineering, production, and procurement teams, and obtaining quotations from suppliers and subcontractors. The role involves evaluating risks, preparing technical and commercial proposals, and supporting negotiations with clients to secure projects. The Estimation Engineer will also update cost databases, perform market and price research, and contribute to continuous improvement of estimation processes and standards.<br>Qualifications<br> Candidates should possess strong skills in BOQ preparation and Project Estimation for structural steel and industrial fabrication works. Candidates should possess a solid foundation in Civil Engineering or a related engineering discipline, with the ability to interpret technical drawings and specifications. Candidates should possess effective Negotiation skills for dealing with clients, suppliers, and subcontractors on pricing and contract terms. Candidates should possess strong Research skills to analyze market rates, material costs, and industry trends that impact project estimates. Relevant qualifications include a bachelor’s degree in Civil, Structural, or Mechanical Engineering, or a closely related field. Beneficial experience includes prior work in steel fabrication, construction, or industrial projects, and familiarity with estimation software and Excel. Additional beneficial skills include attention to detail, numerical accuracy, time management, and clear written and verbal communication in English. Knowledge of regional market conditions and standards in Egypt and the Middle East is an advantage.

Graduate Sales Engineer | Building Automation & Industrial Solutions<br>Location: Nasr City, Cairo, Egypt Company: Electra Control Co.<br>About Electra Control<br>Electra Control Co. has been delivering Building and Industrial Automation solutions since 1994. We work with leading technologies to provide smart, reliable, and energy-efficient solutions for commercial buildings, hotels, hospitals, industrial facilities, and infrastructure projects across Egypt.<br>As we continue to grow, we are looking for ambitious engineering graduates who are excited to build a career in technical sales and business development.<br>⸻<br>Who We’re Looking For<br>We’re looking for engineers who enjoy meeting people, learning new technologies, and solving real customer challenges.<br>If you want a career that combines engineering, business, and relationship building—not just sitting behind a desk—this opportunity is for you.<br>Fresh graduates are strongly encouraged to apply.<br>⸻<br>What You’ll Do<br>* Meet consultants, contractors, developers, and end users to understand their project requirements.* Learn Building Automation Systems (BMS), Industrial Automation, Smart Building technologies, and Electrical Control solutions.* Present technical solutions to customers with support from our engineering team.* Develop and maintain long-term customer relationships.* Identify new business opportunities and follow up on potential projects.* Assist in preparing technical and commercial proposals.* Coordinate with internal engineering and procurement teams to ensure successful project delivery.* Visit project sites when required.<br>⸻<br>What We’re Looking For<br>* Bachelor’s degree in Electrical, Mechatronics, Mechanical, or Electronics Engineering.* Fresh graduate or up to 2 years of experience.* Strong communication and interpersonal skills.* Good command of English.* Positive attitude with a willingness to learn.* Self-motivated and ambitious.* Comfortable meeting customers and visiting project sites.* A driving license is a plus, but not required.<br>⸻<br>What You’ll Gain<br>* Comprehensive technical and sales training.* Direct mentorship from experienced engineers.* Exposure to some of Egypt’s most exciting commercial, hospitality, healthcare, and industrial projects.* A clear career path into Technical Sales, Business Development, and Sales Management.* Competitive salary with performance-based incentives.* A professional, collaborative, and supportive work environment.<br>⸻<br>Why Join Electra Control?<br>At Electra Control, we believe that great sales engineers are built through continuous learning, practical experience, and strong mentorship. You’ll work alongside experienced professionals, engage with industry-leading technologies, and play a direct role in delivering innovative automation solutions to major projects.<br>If you’re an ambitious engineer looking to build a long-term career in technical sales, we’d love to hear from you.<br>Apply now and start your journey with Electra Control.

Company Description Black and Romans Machinery is a specialized representing agency focused on industrial filling and packaging lines for food, beverages, chemicals, personal care, homecare, detergents, petrochemicals, and pharmaceuticals. The company partners with leading European and US manufacturers to provide advanced packaging, filling, cartoning, palletizing, inspection, and end-of-line solutions. With operations centered in Egypt and the wider MENA region, Black and Romans Machinery supports customers through the full lifecycle of their machinery, from qualification and installation to maintenance and after-sales service. A dedicated automation and after-sales team ensures reliable technical support and long-term performance for clients’ production lines. Role Description This is a full-time, on-site Technical Sales Engineer role based in New Cairo. The Technical Sales Engineer will identify customer needs, propose appropriate machinery solutions, and prepare technical and commercial offers for clients across food, beverage, chemical, and pharmaceutical industries. Daily tasks include conducting site visits, performing technical assessments, delivering product presentations and demonstrations, and coordinating with international partners on technical specifications and project requirements. The role involves supporting customers during installation and commissioning, addressing technical inquiries, and collaborating with the automation and after-sales teams to ensure smooth operation and high customer satisfaction. The Technical Sales Engineer will also maintain a structured sales pipeline, participate in tenders, and contribute to market development in Egypt and the MENA region. Qualifications Candidates should possess strong Technical Sales and Sales skills, with a track record of managing industrial or capital equipment sales cycles. Candidates should possess solid Sales Engineering capabilities, including interpreting technical drawings, specifications, and process requirements. Candidates should possess effective Technical Support skills, with the ability to assist customers in troubleshooting and solution implementation. Candidates should possess excellent Communication skills for engaging with clients, partners, and internal teams, both verbally and in writing. Relevant qualifications such as a bachelor’s degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering (or a related technical field) are highly beneficial. Experience in filling and packaging machinery, automation systems, or process equipment within food, beverage, chemicals, or pharmaceuticals is an advantage. Strong problem-solving skills, customer-focused mindset, and the ability to work on-site and visit client facilities as needed. Proficiency in MS Office and CRM tools; good command of English for communication with international suppliers is preferred.

Company Description Shaker Consultancy Group (SCG), founded in 1982, is a leading engineering and design firm in the MENA region with offices in 8 countries and projects in 19 countries worldwide. SCG provides multidisciplinary consultancy services, including project management, design, and construction and commercial management. The firm delivers city-wide infrastructure solutions such as smart city systems, command centers, road design, water treatment plants, district cooling, and utility networks. SCG also specializes in building services, including electrical, HVAC, plumbing, fire protection, telecommunications, and LEED-certified projects, as well as high voltage engineering and SCADA systems. With over 1,200 employees and more than 2,000 successfully completed projects, SCG operates to internationally recognized standards of quality and innovation.<br>Role Description This is a full-time, on-site Plumbing and Fire Protection Design Engineer role based in Sheikh Zayed City. The engineer will design plumbing and fire protection systems for building and infrastructure projects, including sizing and routing of piping networks, equipment selection, and preparation of detailed design drawings and specifications. Responsibilities include performing hydraulic calculations, reviewing codes and standards, coordinating with architectural, structural, and MEP disciplines, and integrating systems within overall project designs. The role involves preparing technical reports, design documentation, and bill of quantities, as well as supporting tender documents and responding to technical queries. The engineer will also participate in design reviews, support site teams during construction, and help ensure compliance with safety, quality, and local regulatory requirements.<br>Qualifications<br> <br>Strong technical skills in plumbing system design, including water supply, drainage, and sanitary systems. Proficiency in pipe design, routing, and sizing, with understanding of materials, fittings, and installation constraints. Experience with maintenance & repair considerations in design to support lifecycle performance and reliability. Awareness of maintenance practices and coordination with facility teams to ensure serviceability of systems. Customer service mindset, with the ability to collaborate effectively with internal stakeholders, clients, and contractors. Bachelor’s degree in Mechanical Engineering, Building Services, or a related discipline. Knowledge of relevant international and local codes and standards for plumbing and fire protection (e.g., NFPA, IPC, applicable local regulations). Proficiency in design and drafting software (e.g., Auto CAD, Revit, or similar MEP tools) and strong MS Office skills. Ability to interpret technical drawings, specifications, and tender documents, with strong attention to detail. Effective written and verbal communication skills in English; additional regional language skills are an advantage. Prior experience in

Company Description DOTec Corp. is a professional engineering company founded in 1991 by Dr. Al Gonzalez Artigas. With licenses in 50 states in the U. S., DOTec Corp. specializes in Civil, Structural, Industrial, Mechanical, Electrical, Chemical, and Forensic Engineering. The company has extensive expertise in swimming pool engineering and water feature design, providing innovative and sustainable solutions for residential, commercial, and recreational facilities.<br>Role Description This is a full-time remote role for a Structural Engineer specializing in Steel Structures and PEB (Pre-Engineered Buildings) design. The Structural Engineer will perform detailed calculations, conduct structural analysis, and ensure designs comply with industry codes and standards. Responsibilities include collaborating with project teams, reviewing designs for safety and efficiency, creating high-quality CAD drawings, and applying engineering principles to deliver innovative and cost-effective solutions.<br>Key Responsibilities Perform structural analysis and design of steel structures, with a strong emphasis on PEB systems, steel frames, bracing systems, and connections in accordance with U. S. design codes. Design and analyze steel buildings, industrial facilities, warehouses, and low- to mid-rise structures, including gravity and lateral force-resisting systems. Develop, review, and revise structural drawings, calculations, and technical reports for steel and PEB projects. Create, analyze, and verify structural models using industry-standard software (ETABS, SAP2000, STAAD, or similar). Coordinate with senior engineers to resolve steel design challenges, constructability issues, and optimization strategies. Review work prepared by junior engineers and provide technical guidance, particularly in steel and PEB design. Ensure constructability, detailing accuracy, and quality of steel structure designs. Apply value engineering principles to optimize steel weight, connection design, and overall building efficiency. Assist in planning and delivering project engineering packages on schedule. Coordinate with multidisciplinary teams (architectural, MEP, industrial) to ensure proper integration of steel structural systems. Maintain organized project documentation and comply with internal QA/QC procedures.<br>Qualifications2-6 years of professional experience in structural engineering, with significant experience in steel structures and PEB design. Bachelor’s degree in Civil or Structural Engineering from a governmental (public) university. Master’s degree is a plus. Strong understanding of steel structural behavior, load paths, connection design, and lateral systems. Proficiency in Auto CAD and Revit for steel detailing and coordination. Strong working knowledge of U. S. design codes, including IBC, ASCE 7, AISC (360 & 341), and ACI (for foundations). Hands-on experience with structural analysis and design software such as ETABS, SAP2000, SAFE, Mathcad, STAAD, or similar. Familiarity with PEB systems, framing concepts, secondary members, and cladding support design is highly preferred. Good command of English (written and spoken). Strong analytical, organizational, and problem-solving skills. Ability to work independently in a remote environment while collaborating effectively with U. S.-based teams. FE Exam required; PE licensure or progress toward licensure is a plus. Experience mentoring junior engineers is preferred. Preferred: current or former university teaching staff member.

Responsibilities responding to breakdowns, diagnosing faultsmanaging stocks of supplies and equipment, obtaining specialist components, fixtures, and fittings.repairing equipment such as (single disc, vacuum machines, scrubber machines, sweeper machines, sweeper rid on machines...etc.creating maintenance procedures to control supervise the mechanical maintenance technicians Responsible for the periodic maintenance of the machines . Responsible for diagnosing and solving machines troubleshooting. Inspecting equipment and conducting routine maintenance.follow up on warranties and make sure to renewsupport the service providers payment.<br>Requirements and skills Machinal Engineering major Work experience not less than 3 years at the same position Excellent organizational and team management skills

We are hiring Senior Sales Engineers for multiple vacancies across our Earthing & Lightning Protection and Oil & Gas business lines. Job purpose The Senior Sales Engineer is responsible for driving business growth and maximizing revenue. The role focuses on generating new opportunities, managing key accounts, leading pre-sales technical and commercial discussions, and successfully closing profitable projects, while maintaining strong relationships with clients and stakeholders. Key Accountabilities Sales & Business Development· Generate new business opportunities.· Develop and manage strong relationships with clients, consultants, and contractors.· Expand the client base and identify new market opportunities.· Lead the full sales cycle from opportunity identification to contract award.· Achieve assigned sales targets and maintain acceptable profit margins. Pre Sales Technical & Commercial Support· Review project specifications, drawings, and BOQs for bidding and pricing purposes only.· Prepare and review pre-sales technical and commercial proposals in coordination with the Technical Office.· Conduct site visits for scope definition, technical understanding, and cost estimation.· Provide technical clarifications during tender and bidding stages.· Ensure accuracy, consistency, and completeness of all submitted proposals and bids.· Follow up on RFQs, RFPs, and quotations until project closure. Client Engagement & Market Representation· Lead technical and commercial discussions and negotiations with clients.· Represent the company in client meetings, site visits, and industry events.· Attend trade shows, exhibitions, and marketing activities as required.· Monitor market trends, competitors, and applicable standards. Reporting & Coordination· Maintain sales pipeline reports, forecasts, and call reports.· Coordinate with technical, procurement, and commercial teams during pre-award stages.· Ensure proper documentation of all sales activities and client communications. Required Skills· Strong sales, negotiation, and closing skills.· High technical awareness combined with strong commercial sense.· Excellent communication and presentation skills.· Strong organizational and time management abilities.· Ability to work independently and manage multiple opportunities.· Very good command of English (spoken and written).<br>Required Education Bachelor’s degree in Engineering (Electrical or Mechanical), depending on the relevant business line. Minimum Required Experience· Minimum 4 years of experience in sales engineering. For Earthing & Lightning Protection vacancies: Relevant sales experience in one or more of the following sectors: (Earthing & Lightning Protection, LV/MV Systems, Power Distribution, Switchgear & Electrical Panels, Electrical Supplies, MEP / Electromechanical Solutions, Surge Protection (SPD)( .<br>For Oil & Gas vacancies: Relevant sales experience in one or more of the following sectors: (Oil & Gas Equipment & Services, EPC Projects, Pumps & Valves, Rotating Equipment, Instrumentation & Control, Fire Fighting Systems, Industrial Mechanical/Electrical Equipment )

Company Description Egypt Scientific, established in 2001, is a trusted provider of advanced environmental solutions and Environmental Impact Assessment (EIA) services. With over 20 years of experience, the company offers turnkey services, including consultation, system design, installation, training, and maintenance, tailored to meet operational and regulatory requirements across various industries. Egypt Scientific specializes in cutting-edge environmental technologies, ranging from air and water quality monitoring systems to safety and occupational health equipment. The company’s services are backed by a dedicated team of engineers and technicians who provide expert support, scientific consultations, and professional training to ensure optimal system performance and environmental compliance.<br>Role Description This is a full-time on-site role for a Sales Engineer, based in Cairo, Egypt. The Sales Engineer will be responsible for driving sales and growing Egypt Scientific’s client portfolio. Core responsibilities include managing customer relationships, meeting sales targets, developing market strategies, generating leads, and closing sales. The role also involves understanding client needs, preparing proposals, and collaborating with technical teams to deliver tailored environmental solutions.<br>???? Key Responsibilities:Promote and sell environmental monitoring and safety solutions, including:• Continuous Emission Monitoring Systems (CEMS)• Ambient Air Quality Monitoring Systems (AQMS)• Water Quality Monitoring Systems (WQMS)• Fixed & portable gas detection systems• Noise monitoring & heat stress equipment Identify new business opportunities and expand client base across different industries Conduct site visits, technical discussions, and product demonstrations Prepare technical and commercial proposals and follow up until closing Coordinate with internal technical teams during project execution and after-sales support Maintain strong relationships with clients and stakeholders Stay updated with environmental regulations and compliance requirements in Egypt???? Requirements:Bachelor’s degree in Engineering (Environmental, Chemical, Mechanical, or related field) Previous experience in an HSE department Good knowledge of environmental monitoring systems (CEMS, AQMS, water quality monitoring, gas detection) Familiarity with environmental regulations and compliance standards1–5 years of experience (sales experience is a strong advantage) Strong communication, negotiation, and presentation skills Good command of English Willingness to travel for site visits across Egypt???? Preferred Qualifications:Experience working with industrial sectors (oil & gas, cement, power plants, etc.) Solid understanding of environmental monitoring technologies and applications Existing network within HSE or environmental sectors???? What We Offer:Competitive salary + attractive commission scheme Transportation support for site visits Continuous training on international technologies Career growth within a specialized environmental company

Job Purpose:Ensure the efficient operation, maintenance, and troubleshooting of HVAC systems by performing preventive and corrective maintenance, optimizing performance, and ensuring compliance with industry standards and safety regulations.<br>Main job duties and responsibilities:Perform preventive and corrective maintenance on HVAC systems to ensure efficient and reliable operation. Monitor system performance, identify potential issues, and take corrective actions to prevent breakdowns. Diagnose issues in chillers, AHUs, ventilation, and refrigeration systems and carry out necessary repairs. Improve HVAC efficiency by adjust controls, calibrate components, and maintain proper airflow and temperature. Coordinate with internal teams and external contractors for maintenance schedules, repairs, and system upgrades. Keep detailed records of maintenance work, inspections, and repairs for reporting and compliance. Manage spare parts inventory to ensure availability of essential components for timely maintenance and repairs. Assist with the installation, testing, and startup of new HVAC systems and equipment. Perform regular inspections and tests to ensure system reliability and find areas for improvement. Follow safety regulations, industry standards, and company policies to ensure compliance and a safe workplace. Perform any additional tasks that might be necessary for easier workflow, within the main frame of the job’s specialty. Educational background and previous experience:Bachelor’s degree in Electrical, Mechanical Engineering, or a related field. Certification in HVAC maintenance, or energy management is a plus. From 2 – 3 years of experience in HVAC system maintenance, troubleshooting, and repair. (Engineer)

Sales ENGINEERBachelor’s degree in Engineeringexperience: 3-5 years Company Description United for Engineering is an established Egyptian company founded in 2014, specializing in civil and structural engineering solutions for industrial and commercial projects. The company delivers integrated construction, electromechanical works, steel structures, and architectural finishes, focusing on quality, innovation, and cost-efficiency. With a strong market reputation, United for Engineering is recognized as a trusted partner across Egypt for precise and sustainable project execution. Team members collaborate in a professional environment that values timely delivery, technical excellence, and long-term client relationships. Role Description The Sales Engineer role is a full-time, on-site position based in New Cairo. This role involves identifying customer needs, presenting appropriate engineering solutions, and supporting the sales cycle from initial inquiry through proposal, negotiation, and closing. The Sales Engineer will prepare technical offers, conduct product and solution demonstrations, and coordinate with engineering and project teams to ensure accurate specifications and timely delivery. Daily tasks include providing technical support to clients, following up on leads, maintaining relationships with existing customers, and contributing to sales forecasts and reporting. The role requires regular site visits, participation in client meetings, and maintaining up-to-date knowledge of company services and industry standards. Qualifications Candidates should possess strong Sales Engineering and technical pre-sales skills, with the ability to translate engineering solutions into clear business value. Candidates should possess solid Technical Support skills, including troubleshooting, solution configuration, and post-sales technical assistance. Candidates should possess effective Sales skills, including prospecting, negotiation, pipeline management, and closing deals. Candidates should possess excellent Communication and Customer Service skills to build trust, manage expectations, and maintain long-term client relationships. Relevant qualifications such as a bachelor’s degree in Engineering (civil, structural, mechanical, or related field) and prior experience in construction or industrial projects are highly beneficial. Additional beneficial qualifications include strong analytical and presentation skills, proficiency in MS Office and basic CRM tools, fluency in English and Arabic, and the ability to work collaboratively in fast-paced project environments.

Company Description Geyushi Automotive Industry has been a key player in Egypt’s automotive sector, with a long-standing focus on innovation and quality. The company operates a state-of-the-art manufacturing facility in the 10th of Ramadan city, producing around 1,500 buses annually, including eco-friendly models that support a sustainable future. A dedicated research and development unit drives locally inspired designs that meet and exceed global standards. With over 60% of components sourced locally, Geyushi emphasizes Egyptian industrial excellence and national growth. Team members join a mission to reshape the automotive landscape in Egypt and beyond. Role Description The Plastics Process Engineer is a full-time, on-site role based in 10th of Ramadan city. The role involves designing, optimizing, and monitoring plastics manufacturing processes for automotive components to ensure consistent quality, efficiency, and safety. Daily tasks include developing and updating process documentation, supervising trial runs, analyzing production data, and implementing process control methods to reduce defects and waste. The engineer collaborates closely with production, quality, maintenance, and R&D teams to support new product introductions and continuous improvement initiatives. The role also requires troubleshooting process issues on the shop floor, supporting root cause analyses, and recommending technical solutions aligned with company standards and customer requirements. Qualifications Strong foundation in Process Engineering and Chemical Engineering, with the ability to apply engineering principles to plastics manufacturing. Competence in Process Design and Process Control to develop, validate, and refine production processes for plastic components. Well-developed Analytical Skills for interpreting process data, identifying trends, and driving data-based improvements. Bachelor’s degree in Chemical Engineering, Plastics Engineering, Mechanical Engineering, or a related field. Experience in plastics processing (e.g., injection molding, extrusion, thermoforming) within an industrial or automotive environment. Familiarity with quality and safety standards relevant to automotive manufacturing (such as ISO/TS or IATF frameworks). Ability to work on-site in a production environment, collaborate with cross-functional teams, and communicate clearly with technical and non-technical stakeholders. Proficiency in using engineering software and basic statistical tools for process analysis and documentation.

???? Location: Cairo, Egypt — Hybrid???? Experience Level: Mid-Level???? Company: Bay BIM Designs<br>Bay BIM Designs is seeking a skilled Electrical Designer / BIM Engineer to join our Cairo production team. This position is intended for an engineer who understands electrical systems, design principles, and U. S. electrical codes and can apply that knowledge effectively within a BIM environment. We are not looking for someone who only knows how to operate Revit—the successful candidate must be able to understand, develop, and coordinate electrical designs.<br>Key Responsibilities:• Develop electrical BIM models and construction documentation using Revit• Prepare power, lighting, low-voltage, and electrical distribution layouts• Perform electrical load calculations, panel schedules, circuiting, and voltage-drop calculations• Develop single-line diagrams, riser diagrams, and equipment schedules• Apply applicable U. S. electrical codes and project standards to electrical designs• Coordinate electrical systems with architectural, structural, mechanical, plumbing, and other disciplines• Review design documents, specifications, and client requirements• Identify clashes, code concerns, design conflicts, and constructability issues• Produce accurate drawings in accordance with project standards and BIM execution requirements• Participate in coordination meetings and respond to technical comments and markups• Maintain model quality, accuracy, and documentation standards throughout the project lifecycle<br>Required Qualifications:• Bachelor’s degree in Electrical Engineering• Approximately 3–6 years of relevant electrical design or BIM experience• Strong understanding of electrical power distribution, lighting, circuiting, grounding, and load calculations• Working knowledge of U. S. electrical codes and standards, particularly the National Electrical Code—NFPA 70• Ability to apply NEC requirements to equipment sizing, conductor sizing, overcurrent protection, grounding, clearances, and electrical layouts• Proficiency in Autodesk Revit and Auto CAD• Ability to read and interpret architectural and engineering construction documents• Experience coordinating electrical systems within multidisciplinary BIM models• Strong attention to detail and problem-solving skills• Good written and spoken English• Ability to work from our Cairo office• Experience with Navisworks, BIM 360/Autodesk Construction Cloud, U. S.-based projects, fire alarm systems, or low-voltage systems is highly preferred.• Candidates should submit their CV and a portfolio or sample of relevant electrical design/BIM work demonstrating their technical design and documentation capabilities.

Company Description Tiptop HR Consulting and Training is a professional services firm focused on connecting organizations with specialized talent and providing targeted training solutions. The company supports clients across multiple industries, helping them build effective teams and enhance operational performance. Through tailored consulting and development programs, Tiptop HR aims to improve workforce capabilities and project outcomes. The organization values collaboration, continuous learning, and practical problem-solving. Joining Tiptop HR Consulting and Training offers opportunities to contribute to impactful projects while developing professional expertise.<br>Role Description The Project Material Engineer role is a full-time remote position responsible for supporting materials-related activities across assigned projects. Day-to-day tasks include evaluating and selecting appropriate materials for components and systems, conducting materials analysis, and collaborating with project teams to ensure compliance with technical specifications and standards. The role involves performing research and development activities, reviewing material performance data, and recommending improvements to designs or processes. The Project Material Engineer will prepare technical documentation, support supplier evaluations, and contribute to risk assessments related to material choices. This position requires regular coordination with engineering, quality, and procurement stakeholders to ensure project timelines and quality requirements are met.<br>Qualifications<br> <br>Strong foundation in materials-focused disciplines, including Materials, Materials Science, and Metallurgy. Ability to perform technical Research and Development (R&D) activities related to material performance and innovation. Experience with Material Selection for engineering applications, considering cost, performance, safety, and regulatory requirements. Bachelor’s degree or higher in Materials Science, Metallurgical Engineering, Mechanical Engineering, or a related field. Familiarity with industry standards and testing methods for materials characterization and qualification. Proficiency in technical documentation, data analysis, and use of engineering tools or software related to materials evaluation. Strong problem-solving skills, attention to detail, and ability to work independently in a remote environment. Effective communication skills for collaborating with multidisciplinary teams and presenting technical findings. Experience in project-based work or engineering consulting environments is an advantage.