Equipment operator Jobs

<p>Ensure security and safety across the facility in line with the targets, standards, and instructions set by the General Manager, hotel management, and the Security Manager. Keep related records and work on self-development. Fully perform all duties assigned by the Security Supervisor and senior staff. Ensure the safety of life and property within the assigned area of responsibility. Greet guests, provide information and guidance, and bid them farewell. Organize human and vehicle traffic and support communication between the facility and individuals. Maintain constant vigilance day and night, gather relevant information, and submit it to the appropriate persons. Provide initial response to incidents such as fires, sabotage, injuries, and fights, and report them to the relevant persons. Be respectful, moderate, and polite toward managers, seniors, and colleagues. Pass all relevant information to the next security officer during shift handover. Inform the Security Supervisor of all developments and events that occur within the area of responsibility. Be familiar with the procedures for catching and detaining criminals. Ensure that all devices and equipment, such as walkie-talkies, detectors, and telephones, are well-maintained, clean, charged, and operating properly. Immediately inform the supervisor of any bomb threat or suspicious package and secure the surrounding area. Take part in the Emergency Response Teams. Ensure that the shift area is kept clean, orderly, and neat. Keep logs and records properly and accurately, and verify signatures. Monitor the entry and exit of furniture and equipment being removed for maintenance or repair, and record these movements. Protect hotel guests from any external factors that may cause inconvenience. Gather information and share it with senior staff rather than disclosing it to third parties. When writing an incident report, include detailed information about the individuals involved, the location, time, how the incident developed, and its consequences. Ensure that employees entering or leaving the facility use their ID cards. Identify and report those who do not comply, and monitor the situation. Inspect the surrounding units and report any suspicious persons or vehicles to the supervisor. Use communication tools (walkie-talkies, telephones) correctly and for their intended purpose. Comply fully with shift-change rules and ensure a smooth transition with no issues. Ensure security in areas where explosive or combustible materials are used for entertainment purposes. Take advantage of all opportunities for self-development. Correct deficiencies identified during inspections, report needs, and strive for continuous improvement. Recognize that activities and purchased equipment may have environmental impacts. Participate in activities aimed at protecting biological diversity, share responsibilities, promote environmental awareness, and engage in necessary training. Trainings. To provide minimum consumption of all currently used materials and equipment (paper, printouts, etc.). To implement necessary warnings and departmental trainings in order to save energy inside the facility. To implement responsibilities in order to eliminate and collect waste in a proper way, reduce environmental pollution and harmful effects to the environment. Carry out all responsibilities related to the quality management systems implemented at the facilities. Carry out all other duties assigned by managers and hotel management not specified in the job description.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Minimum high school diploma</p><p>Experience: At least 2 years in a related field; industry experience is an asset</p><p>Foreign Language: Not required</p><p>Courses/Training: Related field seminars/courses</p><p>Computer Literacy: Not required</p><p>Skills: Ability to use basic tools/equipment; perform simple, repetitive tasks</p>

<p>The Rolling Stock Engineer is responsible for leading and managing the maintenance operations of rolling stock and depot equipment to ensure reliability, availability, and safety. The role focuses on operational efficiency, technical excellence, and proactive technician team leadership. It involves overseeing a multidisciplinary maintenance team, coordinating resources, ensuring safety standards, and leveraging maintenance systems like Maximo for accurate tracking and reporting.</p><p><strong>RESPONSIBILITIES/DUTIES</strong></p><p><strong>Operations &amp; Maintenance Management</strong></p><ul><li>Oversee and support all maintenance activities for rolling stock and depot equipment.</li><li>Monitor operational efficiency, identify deviations, and implement corrective actions.</li><li>Investigate reported/unreported damages, equipment failures, and recurring issues to improve system reliability.</li><li>Ensure compliance with planned and corrective maintenance schedules and coordinate cross-functional technical efforts.</li><li>Analyze trainset performance and operational behavior using diagnostic tools and field data.</li><li>Manage requirements of maintenance activities for sub-contractors &amp; suppliers.</li></ul><p><strong>Resource &amp; Performance Management</strong></p><ul><li>Manage human, material, and financial resources to ensure optimal operational output.</li><li>Participate in developing training programs, evaluating performance, and building competency plans.</li><li>Review and optimize spare parts usage and material forecasting to reduce downtime.</li><li>Support planning for capital investment and lifecycle management of assets.</li></ul><p><strong>Team Leadership &amp; Coordination</strong></p><ul><li>Lead day-to-day team coordination, including task assignment, resource planning, shift management, and conflict resolution.</li><li>Implement coaching and mentoring practices to support team development and performance enhancement.</li><li>Foster a collaborative and informed work culture through regular briefings and structured communication.</li><li>Drive employee engagement initiatives and identify succession planning opportunities within the team.</li></ul><p><strong>Maximo System &amp; Digital Tools</strong></p><ul><li>Maintain accurate maintenance records using the Maximo system (or equivalent MMS).</li><li>Generate, review, and close work orders in Maximo, ensuring full traceability of maintenance activities.</li><li>Analyze maintenance data trends and provide insights for continuous improvement.</li><li>Train and guide team members on Maximo usage and digital reporting practices.</li></ul><p><strong>Safety &amp; Compliance</strong></p><ul><li>Ensure adherence to all occupational health and safety (OHS) regulations, company safety standards, and risk mitigation protocols.</li><li>Ensure all work activities are closed in Maximo once the work has been completed (as per the defined company timescales).</li><li>Promote a strong safety culture through toolbox talks, safety drills, and compliance audits.</li><li>Oversee safe operations during maintenance work, ensuring the protection of personnel and assets.</li><li>Lead incident investigations, report findings, and implement lessons learned to prevent recurrence.</li></ul><p><strong>SAFETY RESPONSIBILITIES:</strong></p><ul><li>Promote a positive safety culture within the workplace and attend any safety-related meetings or briefings as required within the job role.</li><li>Comply with the requirements of RDMC RQHSE Policy and Safety Management System.</li><li>Be mindful that Safety, Security, and Environmental protection are everyone s responsibility. All staff members are accountable for reporting and intervening in any Safety, Security, or Environmental violations.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in electrical or mechanical engineering (or related discipline).</li><li>Fluent in Arabic and proficient in English; knowledge of French is an added advantage.</li><li>Solid understanding of rolling stock and depot equipment systems, including mechanics, pneumatics, electronics, and diagnostics.</li><li>Knowledge of Lean Manufacturing principles, team and production management, safety standards, and change management.</li><li>Proficiency with Maintenance Management Systems (preferably Maximo).</li><li>Minimum of 3-5 years of experience in the railway industry, with at least 5 years in rolling stock or depot equipment maintenance.</li><li>Proven track record in managing change initiatives and driving continuous improvement.</li><li>Strong leadership with effective communication, supervision, and coordination skills.</li><li>Analytical and results-oriented, with strategic thinking and a hands-on problem-solving mindset.</li><li>Ability to manage high-pressure environments and make timely, sound decisions.</li><li>Proven negotiation skills and stakeholder management capabilities.</li><li>Commitment to innovation, operational excellence, and professional integrity.</li></ul>

Responsibilities:<br>Prepare & review General Layout Drawings, equipment arrangement, above/underground cable raceway design, grounding calculations, grounding grid layout, secondary (equipment) grounding, lightning protection system layout and related calculations, equipment lists, BOQs. Perform Electrical Equipment sizing calculations (MV&LV cables, Transformers, Diesel Generators, Circuit breakers, etc...) Perform grounding grid sizing and analysis calculation. Perform Lightning assessment and layout drawings in accordance with IEC 62305 and NFPA780. Ensure compliance with electrical design requirements, project specifications, and company procedures. Coordinate and liaise with other disciplines (e.g. Civil/ Structural, mechanical) to design electrical installation. Evaluate supplier proposals and select equipment based on technical requirements and project specifications. Review of Supplier Drawings/Calculations including but not limited to protection, Control, and telecommunication systems of the substation. Monitor progress, resolve technical issues, and manage resources effectively. Provide mentorship and guidance to junior engineers, ensuring adherence to engineering standards and best practices. Identify any concerns during design process and report to Lead Electrical Engineer.<br>Qualifications:<br>Bachelor’s degree in electrical engineering – Electrical Power Major. A Higher Degree (Master’s, PhD) is a Plus.5+ years of working experience in Primary design of substations and/or power plants. In-depth knowledge of relevant industry standards and regulations (IEC, IEEE, NEC, etc.). Experience in grounding calculation using CDEGS, CYMGRD, or equivalent software. Proficiency in Auto CAD, Microsoft Office, etc. 3D modeling experience (e.g., Smart Plant, PDMS, Revit) is a plus. Excellent analytical, problem-solving, and decision-making skills Effective communication and interpersonal skills, with the ability to work collaboratively in a team environment. Experience with international projects and multi-cultural environments is a plus.

Job Description<br>About the Role<br>We are looking for a creative and detail-oriented Video Producer to join our team. You will be responsible for the complete video production process, from preparing the studio and filming to editing and delivering high-quality content for our brand.<br>Responsibilities • Plan and execute professional video shoots. • Set up and manage studio lighting. • Configure and monitor audio equipment and microphones. • Operate cameras and filming equipment. • Edit videos using Adobe Premiere Pro. • Perform color correction and basic color grading. • Create engaging videos for You Tube, social media, training courses, and marketing campaigns. • Add subtitles, graphics, and simple motion graphics when needed. • Organize and manage media files and project assets. • Ensure all content meets the company’s quality standards.<br>Requirements • 2+ years of experience in video production and editing. • Strong experience with Adobe Premiere Pro. • Basic knowledge of After Effects is a plus. • Good understanding of camera settings, composition, and framing. • Strong knowledge of professional lighting techniques. • Experience with professional audio recording and microphone setup. • Ability to work independently and manage multiple projects. • Creativity, attention to detail, and strong storytelling skills. • A strong portfolio is required.<br>Preferred Skills • Experience creating You Tube and social media content. • Experience filming educational or corporate videos. • Knowledge of color grading workflows. • Experience with DSLR, Mirrorless cameras, or i Phone Pro production workflows. • Basic photography skills are a plus.<br>What We Offer • Professional studio environment. • Modern filming equipment. • Opportunity to work on innovative technology and ERP projects. • Friendly and collaborative team. • Career growth opportunities.<br>⸻<br>Location: On-site Employment Type: Full-time<br>Application Instructions<br>Please send: • Your CV • Portfolio or Showreel • Links to your best work (You Tube, Behance, Drive, Vimeo, etc.) • Expected salary

JOB PURPOSE<br>Lead the mechanical engineering design for assigned projects, producing technically complete HVAC, fire fighting, and plumbing design packages that comply with Egyptian and international codes, while supporting site coordination and contractor management.<br> KEY DUTIES & RESPONSIBILITIES<br>Perform HVAC design including load calculations (HAP/Trace 700), system selection, duct sizing, and equipment specification. Design fire fighting systems including sprinkler networks, fire hose reels, clean agent suppression, and fire pump stations. Design plumbing and drainage systems: potable water distribution, sanitary drainage, rainwater, and hot water systems. Produce complete mechanical drawing packages: floor plans, schematics, equipment schedules, and details. Perform mechanical equipment selection and prepare technical submittals for client and contractor review. Coordinate mechanical systems with structural and architectural teams to resolve space conflicts and penetrations. Review and comment on contractor mechanical shop drawings, equipment submittals, and material samples. Produce mechanical specifications for tender packages. Support site supervision during mechanical installation; conduct site inspections and issue NCRs. Respond to mechanical RFIs from site; prepare technical clarifications. Mentor and guide Junior Mechanical Engineers. Prepare BOQ for mechanical works in coordination with QS team.<br>MINIMUM QUALIFICATIONSEducation Bachelor's Degree in Mechanical Engineering. Experience Minimum 7 years in MEP mechanical design in real estate or construction. Certifications Egyptian Engineering Syndicate — mandatory. ASHRAE membership preferred.<br> TECHNICAL SKILLS<br>HAP or Trace 700 for HVAC load calculations Fire fighting design: NFPA 13, NFPA 14, NFPA 20Plumbing and drainage design: Egyptian Plumbing Code Auto CAD MEP for mechanical drawing production Revit MEP for BIM-based mechanical design Navisworks for MEP clash detection Equipment data sheets and technical specifications Chillers, AHUs, FCUs, VRF/VRV systems selection

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1 Ensure all works are carried out as per instructions and specifications. 2 Liaise with superiors to discuss day to day operational requirements, achievements and improvements and take necessary action accordingly. 3 Be prepared to work unsociable hours or overtime as dictated by his manager. 4 Be able to find faults on kitchen equipment and troubleshoot. 5 To ensure good work practices and reporting procedures. 6 Timekeeping and personal hygiene must be of the highest standards. 7 To assist the team when needed and ensure all problems are dealt with professionally. 8 To ensure PPM services are performed on equipment as directed by management. 9 Behave in a professional manner at all times. 10 Develop and maintain good working relationship with clients. 11 Handle every complaint/suggestion from managers with positive attitude, sincere and promptness. 12 Discuss all complaints/ suggestions with superior and take remedial action. 13 Attend regular meetings (tool box talks) with other staff to share mutual concerns, work practices, improvement plans and to communicate company s policies, standards, objectives and other helpful information. 14 Maintain a professional and pleasant working relation with all his superiors and peers at all times. 15 Ensure all work is carried out in compliance with the HSE management system. 16 Ensure that all accidents, fire loss, theft and damages are reported to Supervisor/Manager immediately and proper procedures are followed. In addition, where appropriate, take remedial action. 17 Work according to the policies, procedures and instructions identified by the Chief Engineer. 18 Take part in the Emergency Response Teams. 19 Must take all measures required for occupational and worker health and comply with all measures taken. 20 To predict that all activities and to be purchased all equipment and belongings may create disease for the environment, to join all activities which is organized to protect biological diversity and shares the responsibilities, shares the individual responsibilities in order to increase environment knowledge and to carry on necessary trainings. To provide minimum consumption currently used all stuffs and equipment (paper, printed out etc.). 21 To implement necessary warnings and departmental trainings in order to save energy inside the facility. To carry on implementing decisions which were taken for saving energy. To predict effects of environment and efficiency of energy on purchased equipment. 22 To implement his responsibilities in order to eliminate and collect waste in a proper way, reduce environmental pollution and harmful effects to the environment. 23 Carry out all responsibilities related to the quality management and food safety management systems implemented at the facilities. 24 Carry out all other duties assigned by managers and hotel management not specified in the job description.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: At least a technical high school or vocational diploma.</p><p>Experience: At least 3 years of practical experience required by the job.</p><p>Foreign Language: Not required.</p><p>Courses and Training: Not required.</p><p>Computer Literacy: Not required.</p><p>Skills: Expected to use non-standard, specific tools and devices related to the job and that can be learned in a few months. If necessary, expected to possess certification in the related field (apprenticeship certification, semi-skilled certification. Expected to possess technical knowledge about the methods, techniques and processes related to certain areas of the job.</p><p></p></section>

Egyptian Engineering Agencies (EEA), a Cairo-based industrial engineering company representing leading international brands in boilers, valves, pumps, compressors, and metalworking machinery, is hiring a Senior Electrical & Controls Engineer to support our growing utilities and industrial equipment portfolio. The role is hands-on, site-based, and central to the commissioning and aftermarket performance of our installed base across Egypt. You can also apply on eea@eeaegypt.com<br>Key Responsibilities<br>Read, interpret, and where needed design control panels and wiring diagrams for boilers, burners, booster sets, compressors, and metalworking machines. Verify installations on site, validate wiring against schematics, and identify deviations before commissioning. Troubleshoot electrical and control issues on industrial equipment in the field, including PLC, sensors, actuators, safety interlocks, and combustion controls. Support commissioning teams during start-up, testing, and handover. Coordinate with international principals on technical queries, tault diagnosis, and warranty cases. Train junior engineers and technicians on control systems and troubleshooting methodology.<br>Requirements<br>Bachelor's degree in Electrical Engineering, Control section (not Power). Minimum 5 years of experience in industrial controls, panel design, or commissioning of process or utility equipment. Strong reading and design ability on control panels and wiring diagrams Hands-on troubleshooting experience on industrial equipment such as boilers, burners, pumps, compressors, or metalworking machines. Good command of English, written and spoken, sufficient to communicate with international suppliers. Mechatronics background is a plus. Valid Egyptian driver's license.<br>Ability to work in a team and travel to client sites across Egypt.<br>Benefits<br>Competitive salary. Private health insurance. Project-based performance bonus. Car allowance where applicable. Rapid career growth in a long-established company with strong international principal relationships.

<p>Monitor all CCTV cameras and surveillance systems throughout the hotel to ensure the safety and security of guests, employees, visitors, and hotel property.</p><p>Observe and report any suspicious activities, security breaches, or unusual incidents to the Security Supervisor immediately.</p><p>Maintain continuous surveillance of all assigned camera systems during the shift without interruption.</p><p>Record, document, and report all security incidents accurately and in a timely manner.</p><p>Retrieve, review, and preserve CCTV footage when requested by authorized management or for investigation purposes.</p><p>Ensure that all CCTV equipment, monitors, recording devices, and related systems are functioning properly and report any faults immediately.</p><p>Maintain confidentiality of CCTV footage and security-related information at all times.</p><p>Assist security officers by providing real-time information during emergencies, incidents, or investigations.</p><p>Monitor fire alarm systems, access control systems, and other security monitoring systems where applicable.</p><p>Ensure all CCTV recordings are stored and archived according to hotel policies and legal requirements.</p><p>Keep accurate logs of incidents, equipment status, maintenance requests, and daily activities.</p><p>Report any unauthorized access to restricted areas or suspicious behavior observed through the CCTV system.</p><p>Coordinate with Security Supervisors and other departments during emergencies or security incidents.</p><p>Comply with all hotel security procedures, emergency response plans, and safety regulations.</p><p>Ensure the CCTV Control Room is kept clean, secure, and organized at all times.</p><p>Use all communication equipment such as telephones, radios, and intercom systems professionally and for official purposes only.</p><p>Protect all hotel information and refrain from sharing security-related information with unauthorized persons.</p><p>Participate in emergency drills, security training, and departmental meetings as required.</p><p>Continuously improve knowledge of CCTV systems, security procedures, and surveillance technology.</p><p>Carry out all responsibilities related to the hotel's quality management, health and safety, and environmental management systems.</p><p>Perform any other duties assigned by the Security Supervisor, Security Manager, or Hotel Management that are related to the position.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: At least a high school diploma.</p><p>Experience: At least 2 years of work experience in the related field.</p><p>Experience in the industry is an asset.</p><p>Foreign Language: Not required.</p><p>Courses and Training: Prior attendance in courses and seminars in the related field.</p><p>Computer Literacy: Not required.</p><p>Skills: Expected to use basic tools and equipment related to the job.</p><p>Expected to perform simple, specific and standard tasks that are generally repetitive.</p>

<p>Monitor all CCTV cameras and surveillance systems throughout the hotel to ensure the safety and security of guests, employees, visitors, and hotel property. Observe and report any suspicious activities, security breaches, or unusual incidents to the Security Supervisor immediately. Maintain continuous surveillance of all assigned camera systems during the shift without interruption. Record, document, and report all security incidents accurately and in a timely manner. Retrieve, review, and preserve CCTV footage when requested by authorized management or for investigation purposes. Ensure that all CCTV equipment, monitors, recording devices, and related systems are functioning properly and report any faults immediately. Maintain confidentiality of CCTV footage and security-related information at all times. Assist security officers by providing real-time information during emergencies, incidents, or investigations. Monitor fire alarm systems, access control systems, and other security monitoring systems where applicable. Ensure all CCTV recordings are stored and archived according to hotel policies and legal requirements. Keep accurate logs of incidents, equipment status, maintenance requests, and daily activities. Report any unauthorized access to restricted areas or suspicious behavior observed through the CCTV system. Coordinate with Security Supervisors and other departments during emergencies or security incidents. Comply with all hotel security procedures, emergency response plans, and safety regulations. Ensure the CCTV Control Room is kept clean, secure, and organized at all times. Use all communication equipment such as telephones, radios, and intercom systems professionally and for official purposes only. Protect all hotel information and refrain from sharing security-related information with unauthorized persons. Participate in emergency drills, security training, and departmental meetings as required. Continuously improve knowledge of CCTV systems, security procedures, and surveillance technology. Carry out all responsibilities related to the hotel's quality management, health and safety, and environmental management systems. Perform any other duties assigned by the Security Supervisor, Security Manager, or Hotel Management that are related to the position.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: At least a high school diploma.</p><p>Experience: At least 2 years of work experience in the related field. Experience in the industry is an asset.</p><p>Foreign Language: Not required.</p><p>Courses and Training: Prior attendance in courses and seminars in the related field.</p><p>Computer Literacy: Not required.</p><p>Skills: Expected to use basic tools and equipment related to the job. Expected to perform simple, specific and standard tasks that are generally repetitive.</p>

<p><br></p><p>Monitor all CCTV cameras and surveillance systems throughout the hotel to ensure the safety and security of guests, employees, visitors, and hotel property. Observe and report any suspicious activities, security breaches, or unusual incidents to the Security Supervisor immediately. Maintain continuous surveillance of all assigned camera systems during the shift without interruption. Record, document, and report all security incidents accurately and in a timely manner. Retrieve, review, and preserve CCTV footage when requested by authorized management or for investigation purposes. Ensure that all CCTV equipment, monitors, recording devices, and related systems are functioning properly and report any faults immediately. Maintain confidentiality of CCTV footage and security-related information at all times. Assist security officers by providing real-time information during emergencies, incidents, or investigations. Monitor fire alarm systems, access control systems, and other security monitoring systems where applicable. Ensure all CCTV recordings are stored and archived according to hotel policies and legal requirements. Keep accurate logs of incidents, equipment status, maintenance requests, and daily activities. Report any unauthorized access to restricted areas or suspicious behavior observed through the CCTV system. Coordinate with Security Supervisors and other departments during emergencies or security incidents. Comply with all hotel security procedures, emergency response plans, and safety regulations. Ensure the CCTV Control Room is kept clean, secure, and organized at all times. Use all communication equipment such as telephones, radios, and intercom systems professionally and for official purposes only. Protect all hotel information and refrain from sharing security-related information with unauthorized persons. Participate in emergency drills, security training, and departmental meetings as required. Continuously improve knowledge of CCTV systems, security procedures, and surveillance technology. Carry out all responsibilities related to the hotel's quality management, health and safety, and environmental management systems. Perform any other duties assigned by the Security Supervisor, Security Manager, or Hotel Management that are related to the position.</p><p><strong>Desired Candidate Profile</strong></p>Education: At least a high school diploma. Experience: At least 2 years of work experience in the related field. Experience in the industry is an asset. Foreign Language: Not required. Courses and Training: Prior attendance in courses and seminars in the related field. Computer Literacy: Not required. Skills: Expected to use basic tools and equipment related to the job. Expected to perform simple, specific and standard tasks that are generally repetitive.

<p>Keep the technical services workshop up and running. Maintenance and production of all items need to paint and furniture in the facility. Care for and repair all items need to paint in the facility. Perform tasks assigned by his/her manager that are related to the department and position. Take part in any work that requires the full participation of the Technical Service Department. Scrape, sandpaper, prime, or seal surfaces prior to painting in the facility. Repair any problems with keys and locks. Work on a shift basis and start the shift on time. Keep the work space clean and ensure that it is cleaned after the work is complete. Must always look clean and proper and wear a uniform. Work according to the policies, procedures and instructions identified by the Chief Engineer Take part in the Emergency Response Team. Must take all measures required for occupational and worker health and comply with all measures taken. To predict that all activities and to be purchased all equipment and belongings may create disease for the environment, to join all activities which is organized to protect biological diversity and shares the responsibilities, shares the individual responsibilities in order to increase environment knowledge and to carry on necessary trainings. To provide minimum consumption currently used all stuffs and equipment (paper, printed out etc.). To implement necessary warnings and departmental trainings in order to save energy inside the facility. To carry on implementing decisions which were taken for saving energy. To predict effects of environment and efficiency of energy on purchased equipment. To implement his responsibilities in order to eliminate and collect waste in a proper way, reduce environmental pollution and harmful effects to the environment. Carry out all responsibilities related to the quality management and food safety management systems implemented at the facilities. Carry out all other duties assigned by managers and hotel management not specified in the job description.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education :</strong> At least a technical high school or vocational diploma.</p><p><strong>Experience :</strong> At least 2 years of practical experience required by the job.</p><p><strong>Foreign Language:</strong> Not required.</p><p><strong>Courses and Training:</strong> Not required.</p><p><strong>Computer Literacy:</strong> Not required.</p><p><strong>Skills:</strong> Expected to use basic tools and equipment related to the job. If necessary, expected to possess certification in the related field</p>

<p>Keep the technical services workshop up and running. Maintenance and production of all items need to paint and furniture in the facility. Care for and repair all items need to paint in the facility. Perform tasks assigned by his/her manager that are related to the department and position. Take part in any work that requires the full participation of the Technical Service Department. Scrape, sandpaper, prime, or seal surfaces prior to painting in the facility. Repair any problems with keys and locks. Work on a shift basis and start the shift on time. Keep the work space clean and ensure that it is cleaned after the work is complete. Must always look clean and proper and wear a uniform. Work according to the policies, procedures and instructions identified by the Chief Engineer Take part in the Emergency Response Team. Must take all measures required for occupational and worker health and comply with all measures taken. To predict that all activities and to be purchased all equipment and belongings may create disease for the environment, to join all activities which is organized to protect biological diversity and shares the responsibilities, shares the individual responsibilities in order to increase environment knowledge and to carry on necessary trainings. To provide minimum consumption currently used all stuffs and equipment (paper, printed out etc.). To implement necessary warnings and departmental trainings in order to save energy inside the facility. To carry on implementing decisions which were taken for saving energy. To predict effects of environment and efficiency of energy on purchased equipment. To implement his responsibilities in order to eliminate and collect waste in a proper way, reduce environmental pollution and harmful effects to the environment. Carry out all responsibilities related to the quality management and food safety management systems implemented at the facilities. Carry out all other duties assigned by managers and hotel management not specified in the job description.</p><p><strong>Desired Candidate Profile</strong></p><p>Education : At least a technical high school or vocational diploma. Experience : At least 2 years of practical experience required by the job. Foreign Language: Not required. Courses and Training: Not required. Computer Literacy: Not required. Skills: Expected to use basic tools and equipment related to the job. If necessary, expected to possess certification in the related field</p>

<p><b><br></b></p><p><b>Job Description </b>Responsible for specific stations in the restaurants or bars, delivers food and beverage services to customers, possesses the related knowledge, and always present at his/her station. Assigned to work in the restaurant or bars. Prepare the restaurants and bars, taking into account the service flow in these areas. Take and serve orders from customers. Inform customers about order alternatives and encourage the sales of targeted services. Deliver maximum service in each unit, keeping in line with service rules. Prepare the service plates needed throughout service, collect the empty plates, and instruct the Bus Boys and interns. Maintain and any personal belongings of customers that have been left in the workstation and hand such belongings over to his/her supervisors. Comply with the departmental instructions and procedures published by the F&amp;B Department. Carry out duties according to the practices and operational standards identified by the Food and Beverage Manager. Comply with operational rules. Plan working hours as deemed appropriate by the Food and Beverage Manager. Act according to the weekly work schedule and working hours. Attend the orientation training. Undergo two performance assessments each year. Strive to achieve 100% customer satisfaction. To predict that all activities and to be purchased all equipment and belongings may create disease for the environment, to join all activities which is organized to protect biological diversity and shares the responsibilities, shares the individual responsibilities in order to increase environment knowledge and to carry on necessary trainings. To provide minimum consumption currently used all stuffs and equipment (paper, printed out etc.). To implement necessary warnings and departmental trainings in order to save energy inside the facility. To carry on implementing decisions which were taken for saving energy. To predict effects of environment and efficiency of energy on purchased equipment.&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Education: At least a primary school diploma. Experience: Can learn the job in 3 year and perform duties at expected level. Foreign Language: Not required. Courses and Seminars: Prior attendance in trainings in the related field. Computer Literacy: Not required. Skills: Has knowledge of and is capable of using the products, kitchen and equipment. Expected to use non-standard, specific tools and devices related to the job and that can be learned in a few months.</p>

<p><strong>Join our dynamic team as a Maintenance Engineer and play a vital role in ensuring the smooth operation of our facilities in El-Sadat City, Monufya, Egypt!</strong> We are seeking a highly motivated and experienced professional to contribute to our on-site maintenance operations. If you are passionate about problem-solving, preventive maintenance, and teamwork, this is the perfect opportunity for you!</p><p><strong>Responsibilities:</strong></p><ul><li>Conduct <strong>preventive maintenance</strong> procedures on equipment and systems.</li><li><strong>Troubleshoot</strong> and repair mechanical, electrical, hydraulic, and pneumatic systems.</li><li>Utilize <strong>performance monitoring</strong> techniques to identify potential issues and optimize equipment performance.</li><li>Collaborate with the <strong>team</strong> to develop and implement maintenance strategies.</li><li><strong>Coordinate</strong> with other departments to minimize downtime and ensure efficient operations.</li><li>Perform <strong>root cause analysis</strong> to prevent recurring equipment failures.</li><li>Maintain accurate maintenance records and documentation.</li></ul><p><strong>Growth Opportunities:</strong></p><p>We are committed to providing our employees with opportunities for professional growth and development. As a Maintenance Engineer, you will have the chance to expand your skills and knowledge through training programs and mentorship opportunities. You will also have the opportunity to advance within our organization as you demonstrate your expertise and leadership potential.</p><p><strong>Team and Culture:</strong></p><p>Our team is comprised of dedicated and skilled professionals who are passionate about their work. We foster a collaborative and supportive work environment where everyone is encouraged to contribute their ideas and expertise. We believe in teamwork, communication, and continuous improvement.</p><p><strong>Impact:</strong></p><p>As a Maintenance Engineer, you will have a direct impact on the efficiency and reliability of our operations. Your expertise will help us to minimize downtime, reduce costs, and ensure the safety of our employees. You will be a critical part of our team, and your contributions will be highly valued.</p><p><strong>Location: </strong> El-Sadat City, Monufya, Egypt</p><p><strong>Work Arrangement:</strong> On-site</p><p><strong>Requirements</strong></p><p>We are looking for a talented and dedicated Maintenance Engineer to join our team! If you possess the following qualifications, we encourage you to apply:</p><ul><li><strong>Experience:</strong> 3-7 years of experience in a maintenance engineering role.</li><li><strong>Preventive Maintenance:</strong> Proven experience in performing preventive maintenance procedures.</li><li><strong>Problem-Solving:</strong> Strong analytical and problem-solving skills.</li><li><strong>Technical Skills:</strong> Solid understanding of mechanical, electrical, hydraulic, and pneumatic systems.</li><li><strong>Performance Monitoring:</strong> Familiarity with performance monitoring techniques and equipment.</li><li><strong>Teamwork:</strong> Excellent teamwork and communication skills.</li><li><strong>Coordination:</strong> Ability to coordinate with other departments and teams.</li><li><strong>Root Cause Analysis:</strong> Experience in performing root cause analysis.</li></ul>

<p>To operate the plant within the pre-defined targets and ranges by continuously monitoring all the plant processes using all available tools to ensure employees safety, stable equipment operation, equipment integrity, product quality within prescribed equipment design limitations and a combination of production, Maintenance, process and quality requirements.</p><p><strong>Key Responsibilities :Key Accountabilities</strong></p><p>1-Health &amp; Safety:</p><p>Adhere to and enforce relevant legislation and policies and ensure that highest degree of safety and safe working practices are maintained.</p><p>Communicating, improving, and enforcing safety standards in all work environments and areas, acting as a role model and Manage PPEs stock.</p><p>Inspect Mobile equipment safety standards and the Firefighting system readiness</p><p>2-Functional:</p><p>Launch, operate, and monitor the platform system to ensure safe, efficient, and uninterrupted operations.</p><p>Monitor process parameters, record downtime, and report operational deviations.</p><p>Adjust feed rates to achieve optimal performance while maintaining the required quality standards.</p><p>Monitor fire detection and fire protection systems to ensure safe and smooth operations.</p><p>Develop Risk Assessments and Safe Work Instructions (SWIs) for existing and newly introduced activities.</p><p>Monitor stockpile aeration and temperature measurements to ensure material stability and safety.</p><p>Prepare Alternative Fuel (AF) material mixtures (e.g., Refuse-Derived Fuel (RDF) and Biomass) and transfer them to the Alternative Fuels and Raw Materials (AFR) pre-processing system.</p><p>Receive, inspect, and unload Alternative Fuel (AF) materials, ensuring compliance with quality control standards.</p><p>Organize and manage stockpiles within the storage area in accordance with Alternative Fuels and Raw Materials (AFR) standards.</p><p>Receive, inspect, and prepare industrial waste for processing</p><p>Ensure housekeeping standards are maintained across the Suez Platform at all times.</p><p>Collect, analyze, and record operational data while maintaining accurate daily log records.</p><p>Ensure full compliance with Standard Operating Procedures (SOPs) and operational guidelines.</p><p>Monitor and maintain labor attendance records.</p><p>Ensure proper isolation and barricading of operational areas in accordance with HSE requirements.</p><p>Manage material flow and stacking operations to ensure efficient storage and handling.</p><p>Continuously monitor platform operations to maximize operational efficiency and productivity.</p><p>Monitor and oversee the operation of the shredding line to ensure reliable and efficient performance.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education:</strong></p><p>Bachelor s Degree</p><p><strong>Technical Skills</strong></p><p>Production operations, Basics of computer skills (Microsoft office), Good command of English Language</p><p><strong>Experience:</strong></p><p>5 - 7 Years of similar role with good knowledge of digital panels and control units of RDF preprocessing</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Monitor all CCTV cameras and surveillance systems throughout the hotel to ensure the safety and security of guests, employees, visitors, and hotel property. Observe and report any suspicious activities, security breaches, or unusual incidents to the Security Supervisor immediately. Maintain continuous surveillance of all assigned camera systems during the shift without interruption. Record, document, and report all security incidents accurately and in a timely manner. Retrieve, review, and preserve CCTV footage when requested by authorized management or for investigation purposes. Ensure that all CCTV equipment, monitors, recording devices, and related systems are functioning properly and report any faults immediately. Maintain confidentiality of CCTV footage and security-related information at all times. Assist security officers by providing real-time information during emergencies, incidents, or investigations. Monitor fire alarm systems, access control systems, and other security monitoring systems where applicable. Ensure all CCTV recordings are stored and archived according to hotel policies and legal requirements. Keep accurate logs of incidents, equipment status, maintenance requests, and daily activities. Report any unauthorized access to restricted areas or suspicious behavior observed through the CCTV system. Coordinate with Security Supervisors and other departments during emergencies or security incidents. Comply with all hotel security procedures, emergency response plans, and safety regulations. Ensure the CCTV Control Room is kept clean, secure, and organized at all times. Use all communication equipment such as telephones, radios, and intercom systems professionally and for official purposes only. Protect all hotel information and refrain from sharing security-related information with unauthorized persons. Participate in emergency drills, security training, and departmental meetings as required. Continuously improve knowledge of CCTV systems, security procedures, and surveillance technology. Carry out all responsibilities related to the hotel's quality management, health and safety, and environmental management systems. Perform any other duties assigned by the Security Supervisor, Security Manager, or Hotel Management that are related to the position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education:</strong> At least a high school diploma.</p><p><strong>Experience:</strong> At least 2 years of work experience in the related field. Experience in the industry is an asset.</p><p><strong>Foreign Language:</strong> Not required.</p><p><strong>Courses and Training:</strong> Prior attendance in courses and seminars in the related field.</p><p><strong>Computer Literacy:</strong> Not required.</p><p><strong>Skills:</strong> Expected to use basic tools and equipment related to the job. Expected to perform simple, specific and standard tasks that are generally repetitive.</p><p></p></section>

<p>Are you a passionate and driven <strong>Mechanical Maintenance Engineer</strong> ready to make a significant impact? Join our dynamic team in <strong>Alexandria, Egypt</strong>, where your expertise will be pivotal in ensuring the seamless operation of our cutting-edge manufacturing and production facilities. This is an exciting <strong>full-time, on-site</strong> opportunity for an experienced professional eager to contribute to a thriving industrial environment!</p><p><strong>Overview:</strong> We are seeking a highly motivated Mechanical Maintenance Engineer to uphold the highest standards of operational efficiency and reliability. You will be at the forefront of maintaining our essential machinery, playing a crucial role in our continuous success and innovation.</p><p><strong>Responsibilities:</strong></p><ul><li>Execute comprehensive <strong>mechanical maintenance</strong> activities, including preventive and corrective actions, on a wide range of industrial equipment.</li><li>Diagnose and resolve complex mechanical issues, ensuring minimal downtime and maximum productivity.</li><li>Conduct regular inspections and performance checks to identify potential problems before they escalate.</li><li>Implement and adhere to stringent safety protocols and best practices in all maintenance operations.</li><li>Collaborate effectively with cross-functional teams to optimize equipment performance and contribute to continuous improvement initiatives.</li><li>Maintain accurate records of all maintenance work, including parts used, repairs performed, and equipment status.</li><li>Participate in the installation, commissioning, and upgrade of new mechanical systems and machinery.</li></ul><p><strong>Skills &amp; Technologies:</strong> This role demands a strong foundation in <strong>Mechanical Engineering</strong> principles, coupled with hands-on experience in <strong>Mechanical Maintenance</strong>. You will leverage your skills in <strong>troubleshooting</strong>, <strong>preventive maintenance</strong>, and <strong>corrective maintenance</strong> to ensure operational excellence. Familiarity with industrial equipment, hydraulics, and pneumatics is highly valued.</p><p><strong>Growth Opportunities:</strong> As an experienced engineer, you will have ample opportunities to deepen your technical expertise, take on challenging projects, and grow within our organization. We are committed to fostering a learning environment where your skills are continuously sharpened, and your career trajectory is supported.</p><p><strong>Team &amp; Culture:</strong> Join a collaborative and supportive team dedicated to excellence and innovation. We pride ourselves on a culture that values proactive problem-solving, teamwork, and a commitment to safety and quality. Your contributions will be recognized and celebrated in a stimulating work environment.</p><p><strong>Impact:</strong> Your work as a Mechanical Maintenance Engineer will directly impact our production efficiency, product quality, and overall operational success. You will be a key contributor to maintaining our competitive edge and achieving our strategic goals.</p>

<p>• Participate in preparing the factory's annual budget to achieve the required objectives.</p><p>• Implement digital transformation &amp; continuous improvement projects to achieve operation effectiveness.</p><p>• Implement the MPS to meet the established production targets on schedule.</p><p>• Monitor the production process during the three operating periods to solve any technical problems, meet required quality, and control cost.</p><p>• preparing and Manage Labor productivity to ensure delivery on time.</p><p>• Ensure that equipment and personnel are utilized at optimal production capacity to achieve maximum productivity and minimize waste.</p><p>• Coordinate with Maintenance and quality departments for cross duties.</p><p>• Supervise the implementation of preventive maintenance to keep equipment in good working manner and reduce Downtime.</p><p>• Supervise the implementation of HSE instructions to protect equipment and personnel from any hazards.</p><p>• Guide employees, review their work results, resolve work problems and obstacles, and take the necessary corrective actions if needed.</p><p>• Foster a spirit of teamwork and motivate employees towards ethical work practices.</p><p>• Review and submit production reports and KPIs &nbsp;to the line manager for decision-making.</p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in <strong>Mechanical </strong>or <strong>Mechatronics Engineering</strong>.</p></li><li><p>Minimum of <strong>10 years of progressive experience</strong> in a Plastics Mold Injection.</p></li><li><p>Solid engineering background with a deep understanding of <strong>manufacturing principles</strong>, <strong>production methodologies</strong>, and process optimization.</p></li><li><p>Demonstrated experience in driving <strong>operational efficiency</strong>, quality improvement, and cost reduction initiatives.</p></li><li><p>Professional certifications such as <strong>Lean Six Sigma</strong> and/or <strong>PMP</strong> are highly preferred.</p></li></ul><p></p>

<ul><li><p>Execute preventive, predictive, and corrective maintenance activities for mechanical equipment and production machinery.</p></li><li><p>Troubleshoot mechanical breakdowns and identify root causes to minimize production downtime.</p></li><li><p>Monitor the condition and performance of machines and recommend required maintenance or improvement actions.</p></li><li><p>Prepare and maintain preventive maintenance schedules and maintenance records.</p></li><li><p>Respond promptly to machine breakdowns and coordinate with production to restore operations safely and efficiently.</p></li><li><p>Follow up on maintenance work performed by technicians and external contractors.</p></li><li><p>Ensure proper availability and usage of mechanical spare parts and maintenance tools.</p></li><li><p>Support the installation, commissioning, and modification of new machines and equipment.</p></li><li><p>Coordinate with Production, Quality, Electrical, and other departments to resolve operational and technical issues.</p></li><li><p>Ensure that all maintenance activities comply with safety, quality, and company standards.</p></li><li><p>Analyze breakdowns and maintenance data and prepare regular reports and recommendations.</p></li><li><p>Identify opportunities to improve equipment efficiency, reliability, and maintenance cost.</p></li><li><p>Ensure proper documentation of maintenance activities, machine history, and technical interventions.</p></li><li><p>Participate in emergency maintenance activities when required.</p></li><li><p>Support the implementation of 5S, continuous improvement, and engineering best practices.</p></li></ul><p></p><p><strong>Requirements</strong></p><p></p><ul><li><p>Bachelor’s degree in Mechanical Engineering.</p></li><li><p>Experience in a manufacturing / industrial environment is preferred.</p></li><li><p>Good knowledge of mechanical maintenance and industrial machinery.</p></li><li><p>Good troubleshooting and problem-solving skills.</p></li><li><p>Good understanding of preventive and corrective maintenance.</p></li><li><p>Good communication and coordination skills.</p></li><li><p>Good command of MS Office.</p></li></ul><p></p>

<ul><li><p>Issue all Pre-sales activities: Genset room furnishing process for the generator and all relevant accessories, material pricing as per submitted drawings, required Air calculations, concrete pad dimensions,…….ETC “</p></li><li><p>The relevant coordination and the co-operation with the Client project team and other contractors.</p></li><li><p>On-site tracing of existing services and identification of suitable installation methods for Exhaust piping, silencers, Hot air duct, and fuel piping.</p></li><li><p>The compilation of manufacturer’s design drawings for approval by the Client and Consultant prior to manufacturing or ordering of equipment.</p></li><li><p>The programming of activities and monitoring of progress.</p></li><li><p>Supervision of the works and ensuring the quality of the work performed.</p></li><li><p>Ensuring that all the required plant and equipment is available.</p></li><li><p>The supply of all incidental work, services, information and data.</p></li><li><p>•Obtaining working permits for the relevant areas from the Client, complete with all documentation for the type of work to be undertaken.</p></li><li><p>The furnishing of expertise for the successful operation/functioning of the equipment.</p></li><li><p>The offloading at site, storing, handling, construction, installation, piping, cabling, laying, fixing, connecting up, painting and completion on site, including all work, materials and activities incidental thereto.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's Degree in Engineering.</p></li><li><p>Minimum 3-5 years of experience in Diesel generator installation.</p></li><li><p>Proficient in using the programs AutoCAD &amp; Revit.</p></li><li><p>Good communication skills and ability to work independently or in a team.</p></li></ul><p></p>