Electrical Engineering Jobs in Egypt

About Sabbour Consulting:Established in 1957, Sabbour Consulting is a leading multidisciplinary engineering consulting firm with over six decades of expertise in delivering high-quality projects across Egypt and the region. Our portfolio spans infrastructure, commercial, residential, and governmental sectors, supported by a culture of technical excellence and innovation.<br>Job Purpose To design, develop, and coordinate electrical power, lighting, grounding, and telecom/low current systems in accordance with project requirements, applicable codes, and client standards, ensuring technical accuracy, constructability, and timely delivery.<br>Key Responsibilities Prepare electrical design calculations (load, short circuit, voltage drop, illumination, earthing, lightning protection). Develop electrical layouts and schematics for: medium & Low Voltage systems, power distribution, lighting (internal, external, emergency) and grounding/lightning protection systems. Prepare single-line diagrams (SLD) and panel schedules. Ensure compliance with local and international codes (IEC, NEC, BS, local authorities). Design and coordinate telecom and low current systems, including: structured cabling (Data & Voice), CCTV, Access Control, Public Address (PA), Fire Alarm Interface and IP Telephony & Network Infrastructure. Prepare system layouts, riser diagrams, and technical specifications. Coordinate designs with Architectural, Structural, and other MEP disciplines. Prepare design drawings, BOQs, technical specifications, and material submittals. Participate in design review meetings and respond to technical comments. Support tender stage by providing clarifications and value engineering proposals. Ensure all designs meet client requirements, authority approvals, and project specifications. Conduct internal design checks and ensure quality standards are maintained. Assist in resolving site technical issues during construction (as required).<br>Qualifications Bachelor’s Degree in Electrical Engineering. Professional certifications or specialized courses in electrical or telecom systems are an advantage.2-5 years of relevant experience in electrical and telecom design. Previous experience in consultancy or design offices is preferred. Experience in infrastructure, buildings, or mixed-use projects is an advantage. Proficiency in Auto CAD (Revit MEP is an advantage). Electrical calculation software (e.g., ETAP, Dialux, or equivalent). Strong knowledge of electrical & telecom design standards and codes. Ability to prepare BOQs and technical specifications. Strong analytical and problem-solving skills. Effective communication and coordination abilities. Ability to work under pressure and meet deadlines. Attention to detail and quality-focused mindset.

About Sabbour Consulting:Established in 1957, Sabbour Consulting is a leading multidisciplinary engineering consulting firm with over six decades of expertise in delivering high-quality projects across Egypt and the region. Our portfolio spans infrastructure, commercial, residential, and governmental sectors, supported by a culture of technical excellence and innovation.<br>Job Purpose To design, develop, and coordinate electrical power, lighting, grounding, and telecom/low current systems in accordance with project requirements, applicable codes, and client standards, ensuring technical accuracy, constructability, and timely delivery.<br>Key Responsibilities Prepare electrical design calculations (load, short circuit, voltage drop, illumination, earthing, lightning protection). Develop electrical layouts and schematics for: medium & Low Voltage systems, power distribution, lighting (internal, external, emergency) and grounding/lightning protection systems. Prepare single-line diagrams (SLD) and panel schedules. Ensure compliance with local and international codes (IEC, NEC, BS, local authorities). Design and coordinate telecom and low current systems, including: structured cabling (Data & Voice), CCTV, Access Control, Public Address (PA), Fire Alarm Interface and IP Telephony & Network Infrastructure. Prepare system layouts, riser diagrams, and technical specifications. Coordinate designs with Architectural, Structural, and other MEP disciplines. Prepare design drawings, BOQs, technical specifications, and material submittals. Participate in design review meetings and respond to technical comments. Support tender stage by providing clarifications and value engineering proposals. Ensure all designs meet client requirements, authority approvals, and project specifications. Conduct internal design checks and ensure quality standards are maintained. Assist in resolving site technical issues during construction (as required).<br>Qualifications Bachelor’s Degree in Electrical Engineering. Professional certifications or specialized courses in electrical or telecom systems are an advantage.2-5 years of relevant experience in electrical and telecom design. Previous experience in consultancy or design offices is preferred. Experience in infrastructure, buildings, or mixed-use projects is an advantage. Proficiency in Auto CAD (Revit MEP is an advantage). Electrical calculation software (e.g., ETAP, Dialux, or equivalent). Strong knowledge of electrical & telecom design standards and codes. Ability to prepare BOQs and technical specifications. Strong analytical and problem-solving skills. Effective communication and coordination abilities. Ability to work under pressure and meet deadlines. Attention to detail and quality-focused mindset.

<ul><li>Supervise and manage the installation of earthing, grounding, and lightning protection systems.</li><li>Monitor site activities and ensure compliance with project specifications, drawings, and quality standards.</li><li>Coordinate with clients, consultants, subcontractors, and project teams.</li><li>Prepare site reports, progress updates, and documentation.</li><li>Plan manpower, materials, and equipment requirements for site activities.</li><li>Conduct site inspections and identify potential issues before they impact project progress.</li><li>Ensure adherence to health, safety, and environmental requirements.</li><li>Attend site meetings and provide technical support when required.</li><li>Support testing, commissioning, and project handover activities.</li><li>Track project progress and ensure timely completion of assigned tasks.</li></ul>

???? We’re Hiring: Senior Electrical Engineer ????Company: Ace Project Management ???? Location: New Administrative Capital Ace Project Management is seeking a qualified Senior Electrical Engineer to join our project team in the New Administrative Capital. Requirements:✅ Bachelor’s degree in Electrical Engineering ✅ 7+ years of experience in site supervision and electrical construction works ✅ Strong knowledge of power, lighting, low current systems, ELV, and life safety systems ✅ Excellent understanding of electrical drawings, specifications, and applicable codes ✅ Experience coordinating with architectural, structural, and MEP disciplines ✅ Strong communication, leadership, and reporting skills Responsibilities:???? Supervise all electrical works on-site and ensure compliance with approved drawings and specifications ???? Review electrical shop drawings and material submittals ???? Monitor installation quality, progress, and safety requirements ???? Coordinate with contractors, consultants, and other project stakeholders ???? Support testing, commissioning, and handover activities ???? Resolve technical issues and contribute to successful project delivery???? Apply now! Send your CV to [email/contact details] Subject: Senior Electrical Engineer – New Administrative Capital#Hiring #Senior Electrical Engineer #Electrical Engineer #MEP #Construction Jobs #New Capital #Ace Project Management #Engineering Jobs #Site Engineer

Job Summary<br><br>The Electrical Engineer is responsible for ensuring the reliability, efficiency, and safety of all electrical systems and equipment within the factory. The role involves preventive and corrective maintenance, troubleshooting electrical and automation issues, supporting production operations, and driving continuous improvement initiatives to maximize equipment uptime and productivity<br><br>Key Responsibilities Perform preventive, predictive, and corrective maintenance activities on electrical equipment and systems. Troubleshoot and resolve electrical breakdowns to minimize production downtime. Maintain and repair motors, drives, control panels, transformers, switchgear, and power distribution systems. Monitor and maintain PLC, HMI, SCADA, and automation systems. Support production teams by ensuring the availability and reliability of manufacturing equipment. Conduct root cause analysis (RCA) for recurring equipment failures and implement corrective actions. Ensure compliance with electrical safety regulations and company HSE standards. Coordinate with contractors and suppliers during maintenance and project activities. Participate in installation, commissioning, and startup of new equipment and production lines. Maintain accurate maintenance records, reports, and technical documentation. Identify opportunities for energy saving and process improvement. Support continuous improvement initiatives to enhance equipment performance and reliability Manage spare parts requirements and ensure critical inventory availability.<br>Qualifications Bachelor's Degree in Electrical Engineering.3–7 years of experience in industrial manufacturing environments. Experience in Tobacco, FMCG, Food & Beverage, Pharmaceutical, Packaging, Paper, or similar highly automated industries is preferred. Strong knowledge of electrical maintenance, industrial automation, and control systems.

Electrical Technical office engineer Roles & Responsibilities:1-Study the project contract documents (time schedule, project design drawings, BOQ, etc.).2- Must have previous experience with EPLAN software and be familiar with shop drawings of electrical panel work, especially BMS and PLC systems.3- Prepare MEP shop and coordination drawings (or composite drawing) based on project’s designdrawings in accurate with quality standard.4- Coordinate with other trades to solve any conflict between various Engineering disciplines.5- Study and prepare requests for information (RFIs) for all missing, unclear, conflicting or othertechnical matters that may arise during construction.6- Participate in solving/reporting any unexpected technical difficulties, and other problems that may arise during construction to the Technical Office Manager for discussion and proper solve.7- Prepare as-built drawings at the end of the project and hand over to the project consultant.8- Participate in implementing technical office policies and procedures.9-Preparing calculation notes for electrical items (cable sizing, circuit breaker sizing and filling ratio calculations for conduits, cable trays/trunks).10- Preparing voltage drop and short circuit calculations.11- Prepare material submittal in conjunction with material to be and approved by the consultant. Qualification & Requirements:Bachelor's degree in Electrical Engineering. Familiar of MEP construction and panel builder. Experience from 3 to 5 years. Familiar of EPLAN/Revit/Auto CAD software. Excellent command of English language. Excellent awareness of Microsoft office tools. Excellent Communication, Presentation & Negotiations skills.

???? Hassan Allam Holding is Hiring ????<br>We are seeking a motivated and detail-oriented Commercial Engineer – Electrical to join our team and support the successful delivery of major construction and infrastructure projects.<br>Requirements:✔ Bachelor's Degree in Electrical Engineering.✔ 1 to 3 years of experience in Commercial Engineering, Quantity Surveying, and/or Technical Office functions.✔ Experience in quantity take-off, measurement, and cost control activities.✔ Good understanding of contract documents, drawings, specifications, and BOQs.✔ Ability to review and verify quantities for variations, claims, and progress payments.✔ Strong analytical and problem-solving skills.✔ Proficiency in Microsoft Excel and Auto CAD.✔ Excellent communication and coordination skills.<br>Key Responsibilities:???? Prepare and review quantity take-offs from drawings and project documents.???? Assist in the preparation of progress valuations, variations, and commercial reports.???? Support contract administration and cost control activities.???? Coordinate with Technical Office, Site, and Planning teams to ensure accurate quantity measurements.???? Review project drawings and specifications to identify commercial impacts.???? Assist in the preparation and evaluation of subcontractor payment certificates and variations.<br>If you are looking to build your career with one of the region’s leading engineering and construction groups, we encourage you to apply.

<p>• Technical Skills:</p><p>Proficiency in electrical panel design, including layout, wiring diagrams, and schematic drawings.<br>• Strong understanding of electrical components, such as relays, circuit breakers, switches, and<br>transformers.<br>• Knowledge of relevant industry standards and regulations (e.g., UL, NEC, IEC) related to<br>electrical panel design and manufacturing.<br>. Software Proficiency:<br>• Proficiency in computer-aided design (CAD/others) software for electrical panel design and<br>layout.<br>• Familiarity with engineering software for simulation, analysis, and documentation.<br>. Problem-Solving and Analytical Skills:<br>• Strong problem-solving skills to address technical challenges and optimize panel design.<br>• Ability to analyze technical specifications, requirements, and customer needs to develop<br>appropriate solutions.<br>. Communication and Collaboration:<br>• Excellent communication skills, both verbal and written, to effectively communicate technical<br>information to team members, suppliers, and customers.<br>• Ability to collaborate with cross-functional teams, including production, engineering, and quality<br>assurance.<br>. Attention to Detail:<br>• High attention to detail to ensure accuracy in design specifications and documentation.<br>• Ability to review and verify technical drawings, bills of materials, and specifications.</p>

Key Accountabilities:Ensure electrical testing discipline 24/7 three shifts. Comply with Standard Operating Procedures / Work Instructions set by the Company Management & convey to direct reports. Execute the products electrical testing plan according to the Standard operating procedures for every process as well as the international standards. Execute electrical type test. Coordinate & review the weekly electrical testing loading plan in accordance of machine loading plan. Scheduling jobs with maximum manpower utilization & resources to achieve electrical testing target in coordination with Planning Dept. & Testing Manager. Responsible for the FAT and client / third party inspection. Supervise the direct reports for executing the testing output and ensure that the testing processes are done properly. Establish testing equipment’s calibration plan, work instruction and test methods a for laboratory personnel to conduct tests. Establish technical analysis and reports for the root cause of test failure and NCRs as required by the Quality management system documents. Comply and analyze test information to determine process and equipment operating capability and to diagnose multifunction of test equipment. Comply with the relevant requirements of the quality management system. Estimate manpower requirements, testing times, material requirements, and relative costs to provide data for operational decisions Improve, and customize, equipment, testing processes and methods. Contribute and driving continuous improvement of resources “Manpower, Machine & Materials”. Make training for testing supervisor and technicians to improve their performance and competencies in providing the testing service. Assist in developing nonstandard tests for R & D projects (if required). Reports test results and entries. Configures necessary hardware and operating environments as needed to Complete assigned testing. Provides technical expertise on specific tests, and operating systems Assists in the development of test plans and test procedures. Completes assigned test-related tasks.<br>Qualification & Education:Education: Bachelor degree in Electrical or Mechatronics Engineering Years of Experience: 1-3 years. Language: Arabic & English Computer skills: Microsoft office

Key Accountabilities:Ensure electrical testing discipline 24/7 three shifts. Comply with Standard Operating Procedures / Work Instructions set by the Company Management & convey to direct reports. Execute the products electrical testing plan according to the Standard operating procedures for every process as well as the international standards. Execute electrical type test. Coordinate & review the weekly electrical testing loading plan in accordance of machine loading plan. Scheduling jobs with maximum manpower utilization & resources to achieve electrical testing target in coordination with Planning Dept. & Testing Manager. Responsible for the FAT and client / third party inspection. Supervise the direct reports for executing the testing output and ensure that the testing processes are done properly. Establish testing equipment’s calibration plan, work instruction and test methods a for laboratory personnel to conduct tests. Establish technical analysis and reports for the root cause of test failure and NCRs as required by the Quality management system documents. Comply and analyze test information to determine process and equipment operating capability and to diagnose multifunction of test equipment. Comply with the relevant requirements of the quality management system. Estimate manpower requirements, testing times, material requirements, and relative costs to provide data for operational decisions Improve, and customize, equipment, testing processes and methods. Contribute and driving continuous improvement of resources “Manpower, Machine & Materials”. Make training for testing supervisor and technicians to improve their performance and competencies in providing the testing service. Assist in developing nonstandard tests for R & D projects (if required). Reports test results and entries. Configures necessary hardware and operating environments as needed to Complete assigned testing. Provides technical expertise on specific tests, and operating systems Assists in the development of test plans and test procedures. Completes assigned test-related tasks.<br>Qualification & Education:Education: Bachelor degree in Electrical or Mechatronics Engineering Years of Experience: 1-3 years. Language: Arabic & English Computer skills: Microsoft office

We Are Hiring: Electrical Maintenance Engineer Location: Sharqia, Egypt Employment Type: Full-Time Working Schedule: Rotational Shifts Days Off: One Day Off <br>Qualifications Bachelor's Degree in Electrical Engineering (Power, Control, or Communications & Control). Fresh graduates are welcome to apply. Previous experience in industrial maintenance is considered an advantage. Experience in manufacturing or FMCG environments is preferred.<br>Key Responsibilities Execute daily, weekly, monthly, and annual electrical maintenance plans. Perform preventive, corrective, and emergency maintenance activities for production lines and utility equipment. Troubleshoot electrical faults and ensure rapid restoration of equipment operation. Monitor the performance and reliability of electrical systems to maximize production efficiency. Support maintenance activities across all plant departments. Implement and follow Preventive Maintenance (PM) schedules. Monitor spare parts inventory and prepare purchase requests when necessary. Coordinate spare parts requirements for planned overhauls and maintenance shutdowns. Diagnose and maintain electrical motors, control panels, sensors, and industrial electrical equipment.*If your qualifications meet this criteria, kindly send your resume to +201228283222 and mention the job title "Electrical Maintenance" and expected net salary

<p><strong>Key Responsibilities:</strong></p><p>-&nbsp;&nbsp; Review project drawings, specifications, and documentation to create a comprehensive techno-commercial proposal.</p><p>-&nbsp;&nbsp; Develop techno-commercial proposals for the Testing &amp; Commissioning scope of work.</p><p>-&nbsp;&nbsp; Estimate project costs, required manpower, and timelines.</p><p>-&nbsp;&nbsp; Prepare quantity take-offs for MEP equipment from drawings and BOQs.</p><p>-&nbsp;&nbsp; Create and maintain project trackers for progress monitoring.</p><p>-&nbsp;&nbsp; Prepare and submit monthly tendering reports.</p><p>-&nbsp;&nbsp; Collaborate with cross-functional teams to ensure timely proposal submission.</p><p>-&nbsp;&nbsp; Prepare and present cost estimates for approval.</p><p>-&nbsp;&nbsp; Ensure adherence to industry standards and regulatory requirements.</p><p>-&nbsp;&nbsp; Provide financial reporting and trending analysis for effective project management.</p><p>-&nbsp;&nbsp; Monitor and adjust cost estimates based on market fluctuations and price changes.</p>

Position: CAD & Simulation Engineer Aerospace Type: Contractor Assignment Compensation: $19/hour Location: Remote Commitment: Full-time (40 hours/week) or Part-time (20 hours/week) with at least 4 hours overlap with PSTDuration: 8 Weeks Start Date: Immediate<br>Role Responsibilities Develop CAD models and perform simulation/analysis for aerospace components Validate designs using industry-standard tools such as CATIA, Solid Works, ANSYS, and MATLABTranslate technical requirements into simulation models and engineering workflows Optimize aerospace designs based on simulation outcomes Collaborate with cross-functional engineering teams on design and analysis tasks Document methodologies, engineering processes, and project outcomes<br>Requirements Strong experience in CAD engineering and simulation-focused organizations Strong aerospace/mechanical engineering fundamentals Hands-on experience with aerospace modeling, simulation, or design projects Proficiency in CAD and simulation tools Strong analytical and problem-solving skills Ability to work independently in a fast-paced engineering environment Strong communication skills required for consultant-facing responsibilities Bachelor s degree in Aerospace Engineering/Mechanical Engineering from top colleges preferred Master s degree preferred Candidates currently working with leading aerospace companies such as Honeywell, Boeing, Airbus, etc. are highly preferred<br>Application Process Apply via Easy Apply Receive Role Details & Google Form via Email Shortlisted Candidates Receive Delivery Review Details15-Minute Interview Round Offline Assessment Process Final Selection & Onboarding<br><br>Skills: 80173 -<br><br>CAD & Simulation Enginee Aerospace

Position: CAD & Simulation Engineer Aerospace Type: Contractor Assignment Compensation: $19/hour Location: Remote Commitment: Full-time (40 hours/week) or Part-time (20 hours/week) with at least 4 hours overlap with PSTDuration: 8 Weeks Start Date: Immediate<br>Role Responsibilities Develop CAD models and perform simulation/analysis for aerospace components Validate designs using industry-standard tools such as CATIA, Solid Works, ANSYS, and MATLABTranslate technical requirements into simulation models and engineering workflows Optimize aerospace designs based on simulation outcomes Collaborate with cross-functional engineering teams on design and analysis tasks Document methodologies, engineering processes, and project outcomes<br>Requirements Strong experience in CAD engineering and simulation-focused organizations Strong aerospace/mechanical engineering fundamentals Hands-on experience with aerospace modeling, simulation, or design projects Proficiency in CAD and simulation tools Strong analytical and problem-solving skills Ability to work independently in a fast-paced engineering environment Strong communication skills required for consultant-facing responsibilities Bachelor s degree in Aerospace Engineering/Mechanical Engineering from top colleges preferred Master s degree preferred Candidates currently working with leading aerospace companies such as Honeywell, Boeing, Airbus, etc. are highly preferred<br>Application Process Apply via Easy Apply Receive Role Details & Google Form via Email Shortlisted Candidates Receive Delivery Review Details15-Minute Interview Round Offline Assessment Process Final Selection & Onboarding<br><br>Skills: 80173 -<br><br>CAD & Simulation Enginee Aerospace

Electrical Control Engineer | Zamil Steel<br><br>Zamil Steel is hiring an Electrical Control Engineer to join our team in Sadat City, Menoufia.<br><br>Requirements:<br><br>- Bachelor’s degree in Electrical Engineering.<br>- 3–5 years of experience in Electrical Control / Automation.<br>- Steel industry experience is preferred.<br>- Good knowledge of PLC, HMI, VFDs, and industrial control systems.<br>- Good command of English.<br><br>Key Responsibilities:<br><br>- Operate, troubleshoot, and maintain electrical control and automation systems.<br>- PLC programming, modification, and troubleshooting.<br>- Troubleshooting of HMI, VFDs, sensors, and control panels.<br>- Analyze electrical and automation faults and identify root causes.<br>- Perform preventive and corrective maintenance.<br>- Read and interpret electrical and control drawings.<br>- Support installation, commissioning, and startup of electrical control systems.<br>- Improve machine performance and minimize production downtime.<br>- Coordinate with Maintenance, Production, and Engineering teams.<br>- Ensure safe and reliable operation of electrical and control equipment.<br><br>Work Location: Sadat City, Menoufia<br>Working Days: 5 days/week<br>Days Off: Friday & Saturday<br><br>We Offer:<br><br>- Very competitive salary.<br>- Annual profit sharing.<br>- Social Insurance.<br>- Medical Insurance.<br>- Annual bonuses and grants on holidays and special occasions.

Prepare and issue RFQs for electrical materials and equipment. Evaluate technical and commercial offers in coordination with the technical team. Negotiate prices, payment terms, and delivery schedules with suppliers. Ensure purchased materials comply with project specifications and standards. Follow up on purchase orders and delivery status. Coordinate with project, warehouse, and finance departments. Maintain updated supplier database and market price analysis. Job Requirements Bachelor’s degree in Electrical Engineering.3–5 years of experience in electrical procurement. Strong knowledge of electrical materials and specifications. Good negotiation and communication skills.<br> Submit your CV to: a.shawky@giza-power.com

Responsibilities Manage the end-to-end procurement cycle for electrical materials, equipment, and services, from material requisition and RFQ through technical/commercial evaluation, negotiation, PO issuance, and delivery. Review BOQs, drawings, specifications, material requisitions, and project requirements to identify procurement needs and ensure accurate sourcing. Prepare and issue RFQs to approved and potential suppliers/subcontractors and follow up on quotations. Source, evaluate, and develop reliable local and international suppliers for electrical materials and equipment. Prepare and review technical and commercial bid comparisons and coordinate with the Technical Office, Site, QA/QC, and Project teams for technical evaluations and approvals. Ensure that suppliers' offers comply with project specifications, approved vendor lists, applicable standards, and client/consultant requirements. Negotiate prices, payment terms, warranties, delivery schedules, and commercial conditions to achieve the best value for the project.<br>Qualifications Bachelor’s degree in Electrical Engineering.5–9 years of relevant experience, with a strong background in electrical procurement within construction, MEP, EPC, or large-scale infrastructure projects. Proven experience handling procurement for large-scale construction projects. Strong knowledge of electrical materials, equipment, suppliers, and market conditions. Strong ability to understand and interpret electrical drawings, BOQs, specifications, and material submittals. Experience in technical and commercial evaluation of suppliers and subcontractors.

⁦Job Purpose: Ensure the continuous and safe operation of electrical and automation systems in the wafer production plant through the implementation of preventive and corrective maintenance programs, troubleshooting electrical faults, and contributing to equipment improvement and system reliability to achieve maximum operational efficiency and minimize downtime. ⁩Key Responsibilities and Duties: • Execute preventive maintenance plans for electrical and automation systems in the factory. • Inspect and diagnose electrical and electronic faults in production lines and control systems (PLC – Inverters – Sensors). Provide technical supervision to electrical maintenance technicians during daily or emergency repair activities. • Monitor load readings and energy consumption to ensure optimal power utilization. • Inspect and maintain power supply cables and electrical distribution panels to ensure periodic safety and reliability. • Coordinate with the Production Department to minimize downtime and maintain production continuity. • Implement electrical modifications required to improve line performance and enhance efficiency. • Contribute to the development and upgrading of electrical systems for new or modified equipment. • Monitor the availability of critical electrical spare parts and prepare purchase requests in a timely manner. • Ensure full compliance with electrical and occupational safety standards during all maintenance activities. • Prepare breakdown and periodic maintenance reports and submit them to the Maintenance Manager⁩<br>⁦⁩Qualifications<br>Qualifications and Experience: • Bachelor’s degree in Electrical Engineering or Mechatronics Engineering. • 5–7 years of experience in electrical maintenance and automation systems within the food manufacturing industry. • Strong technical knowledge of automation and control systems (PLC – Inverters – Sensors). • Ability to read and interpret electrical schematics and use Auto CAD Electrical software. • Experience in maintaining power distribution and energy supply systems. • Strong analytical skills to identify recurring electrical failures and their root causes.• Proficiency in English (spoken and written). <br>Personal Attributes: • High accuracy and attention to technical details. • Excellent analytical and troubleshooting skills. • Commitment to electrical and industrial safety standards. • Ability to work under pressure in a fast-paced production environment. • Team player with initiative, responsibility, and strong collaboration skills. please send your c.v :career@horreia.com⁩

Delveng is looking for <br>freelancer BMS<br><br>There are job details :<br> Deliver practical, hands-on engineering training based on real projects<br>· Monitor learner progress and provide structured feedback.<br>· Collaborate with the Delveng team to continuously improve course quality.<br>· Integrate modern engineering tools and AI technologies where applicable.<br>*Content Delivery Format<br>· Training is delivered through screen recording with voice narration.<br>· nstructor on-camera appearance is not required.<br>· Content should focus on practical engineering implementation rather than classroom-style lectures.<br>· All training should reflect real engineering practice and professional workflows.<br>*Requirements*<br>· Bachelor's degree in Engineering.<br>· Minimum 5 years of practical experience in the selected specialization.<br>· Strong professional experience in either Design or Site Supervision.<br>· Proficiency in the engineering software relevant to your discipline<br>· Excellent communication and presentation skills.<br>· Previous teaching or training experience is an advantage but not mandatory.<br>· Passion for sharing practical engineering knowledge.<br>· Academics with practical engineering experience<br>*Compensation*<br>· Founding Instructors (First Batch) will receive 70% of the revenue generated from the sales of their own training programs.<br>· Instructor earnings are paid in USD (US Dollars) according to the platform payout policy.<br>· Build a recurring source of income from your professional expertise<br>if interested kindly send cv here<br>01022798804

# Job Vacancy: Electrical Production Engineer<br>** Location:** Borg El Arab, Alexandria, Egypt<br>A leading company specialized in the manufacturing and assembly of **Low Voltage (LV) Electrical Panels** is seeking a qualified **Electrical Production Engineer ** to join its production team.<br># Key Responsibilities:<br>* Supervise the manufacturing and assembly of Low Voltage electrical panels.* Ensure production activities are carried out according to approved drawings, technical specifications, and production schedules.* Coordinate with the Design, Quality, Procurement, and Warehouse teams to ensure smooth production flow.* Monitor production quality and ensure compliance with IEC standards and company procedures.* Supervise technicians and provide technical support during production.* Identify and resolve production issues to improve efficiency and productivity.* Participate in panel inspection and testing before delivery.<br># Requirements:<br>* Bachelor's degree in **Electrical Engineering (Power)**. 1–5 years** of experience in the manufacturing of **Low Voltage (LV) Electrical Panels**.* Strong knowledge of LV switchgear, distribution panels, MCCs, and control panels.* Ability to read and interpret Single Line Diagrams (SLD), General Arrangement (GA) drawings, and electrical schematics.* Good understanding of IEC standards and electrical testing procedures.* Strong leadership, communication, and problem-solving skills.<br># We Offer:<br>* Competitive salary based on qualifications and experience.* Professional development and career growth opportunities.* A dynamic and professional work environment.