Cost Engineer Jobs in Egypt

About the Job:<br>Monitor assembly line operations to ensure adherence to standardized work Instructions, process parameters, and quality control plans.<br>Responsibilities: <br>Enforce Quality Compliance: Monitor shop floor operations across Body, Paint, and General Assembly to ensure strict adherence to Standardized Work Instructions, process sheets, and quality control plans. Drive Built-In Quality (BIQ): Manage station-level quality gates, run Layered Process Audits (LPAs), and verify the operational integrity of error-proofing devices (Poka-Yokes) to stop defects at the source. Lead Root Cause Analysis: Spearhead structured problem-solving initiatives (using 8D, 5-Why, and Fishbone diagrams) for internal scrap, line defects, or assembly reworks to prevent recurrence. Monitor CKD Kit & Part Quality: Partner with Incoming Quality Control (IQC) to evaluate imported and localized CKD parts, tracking dimensional fitment, assembly challenges, and supplier performance anomalies. Oversee Dimensional & Metrology Control: Review Body-in-White (BIW) geometry, CMM measurement trends, gap-and-flush tolerances, and torque-tightening data logs. Manage Quality Holds & Non-Conformances: Isolate suspect material or vehicles immediately, lead Material Review Board (MRB) dispositions, and oversee containment actions. Improve Quality Metrics: Track, analyze, and report critical plant metrics including First Time Quality (FTQ), Direct Run Rate (DRR%), scrap rates, CVA (Customer Vehicle Audit) and Cost of Poor Quality (COPQ). Support Continuous Improvement: Collaborate with production engineering and manufacturing teams on Kaizen projects, process capability studies (), and continuous quality enhancement initiatives.<br>Qualifications:<br>Bachelor’s degree in: Automotive Engineering, Mechanical Engineering, or Industrial Engineering.0-2 years of experience in manufacturing quality, process quality, customer quality, and continuous improvement. Six Sigma Certification is preferred. (Yellow Belt or Green Belt). IATF 16949 Background is preferred.

Maximize sales of Material Handling Equipment" ( Forklift , Manlift , Scissor lift, etc ) Market Analysis & Prospecting: Identify and target key accounts in the Egyptian market, including large contractors, quarry operators, cement/concrete producers, and mining companies. Technical Consultation: Assess client operational needs (e.g., required crushing throughput, earthmoving capacity, concrete output) and propose the optimal heavy equipment solutions (crushers, batching plants, material handlers). Financial Modeling & Tendering: Prepare detailed technical and commercial proposals, including financing options (leasing/loans), total cost of ownership analysis, and warranty terms. Manage complex tender processes. Relationship Management: Build and maintain high-level relationships with decision-makers (Owners, GMs, Procurement Directors) in high-value client organizations. After-Sales Coordination: Work closely with the service department to ensure seamless delivery, commissioning, and reliable after-sales support/maintenance contracts Maximize sales of crushers, and products to our current and new customers through persistent sales prospecting activities focused on the assigned market. Ensure that related sales targets are met regarding unit sales and revenue crushers while giving due attention to the highest price realization.<br>Job Requirements Education: no need for an engineering Bachelor's degree. Proven work experience as a Sales Representative Excellent knowledge of MS Office Familiarity with CRM practices, along with the ability to build productive business professional relationships Highly motivated and target-driven with a proven track record in sales Excellent selling, negotiation, and communication skills Prioritizing, time management, and organizational skills Ability to create and deliver presentations tailored to the audience's needs Relationship management skills and openness to feedback Bachelor’s degree or a related field Car is a must Good command of the English language

Key Responsibilities Technical Responsibilities Lead the geometric design of highways, urban roads, and local streets. Prepare road alignments, profiles, cross-sections, grading, and pavement layouts. Develop roadway design drawings and construction documents. Perform corridor modeling using Civil 3D or similar software. Coordinate horizontal and vertical alignments with utilities and drainage systems. Review and optimize road design for constructability, safety, and cost efficiency. Ensure compliance with project specifications and applicable design standards. Participate in feasibility studies, concept design, preliminary design, and detailed design stages. Prepare design calculations, technical reports, BOQs, and engineering documentation. Conduct design reviews and quality control checks before submission. Project Coordination Coordinate with Civil, Utilities, Structures, Traffic, Landscape, and BIM teams. Attend client meetings and technical coordination meetings. Support proposal preparation and technical presentations. Resolve design issues during project execution. Monitor project progress against schedules and milestones. Leadership Responsibilities Supervise and mentor junior and design engineers. Review drawings and calculations prepared by team members. Allocate tasks and monitor team productivity. Ensure adherence to company QA/QC procedures. Support continuous improvement initiatives within the department. Qualifications Bachelor's Degree in Civil Engineering. Professional registration is an advantage. Master's Degree is a plus. Experience8–10 years of experience in road design engineering. Minimum 5 years in engineering consultancy. Experience in large-scale infrastructure projects. GCC project experience is an advantage. Technical Skills Autodesk Civil 3DAuto CADInfra Works Vehicle Tracking Autodesk Navisworks Bentley Open Roads Designer (preferred) Civil 3D Corridor Modeling Earthwork Calculations Quantity Take-Off Road Safety Standards Highway Design Standards BIM Coordination Microsoft Office

About Noor Nation<br><br>Noor Nation is Egypt's first African renewable energy development and manufacturing startup, providing decentralized solar-powered energy and water solutions across Egypt and Sub-Saharan Africa. Its flagship product, Life Box, is a mobile, solar-powered unit that delivers clean electricity and safe water to farming, tourism, and rural communities. Designed and manufactured in Egypt, Life Box supports sustainability, industrial localization, and economic growth while improving access to essential resources in underserved areas.<br><br>Responsibilities<br><br>Manage the end-to-end execution of solar energy projects, from site assessment and system design to installation, testing, handover, and after-sales support Oversee factory operations, including engineering, production, assembly, testing, and technician supervision Design solar PV systems, prepare technical drawings, layouts, BOQs/BOMs, and ensure compliance with technical standards Use engineering and project management software (e.g., Auto CAD, Sketch Up, PVSyst, PVSol, Primavera, MS Project) for design, simulation, planning, and execution Coordinate with customers, developers, lenders, and investors to resolve technical issues and ensure successful project delivery Prepare documentation, maintain cost estimates and supplier information, generate progress reports and MIS, and support data analysis Travel to project sites across Egypt as needed while maintaining high organizational and communication standards<br><br>Requirements<br><br>Bachelor's degree in Electrical or Mechanical Engineering At least 1 year of experience in the solar or renewable energy industry Knowledge of solar PV systems, energy storage, and solar design tools (e.g., PVSyst, PVSol) Familiarity with relevant electrical codes, HSE standards, and solar project financing is an advantage Strong communication, time management, problem-solving, and teamwork skills Proficient in Microsoft Office and able to work effectively in a fast-paced environment Understanding of contracts, budgets, financial models, and renewable energy technologies

Key Responsibilities Technical Responsibilities Lead the geometric design of highways, urban roads, and local streets. Prepare road alignments, profiles, cross-sections, grading, and pavement layouts. Develop roadway design drawings and construction documents. Perform corridor modeling using Civil 3D or similar software. Coordinate horizontal and vertical alignments with utilities and drainage systems. Review and optimize road design for constructability, safety, and cost efficiency. Ensure compliance with project specifications and applicable design standards. Participate in feasibility studies, concept design, preliminary design, and detailed design stages. Prepare design calculations, technical reports, BOQs, and engineering documentation. Conduct design reviews and quality control checks before submission. Project Coordination Coordinate with Civil, Utilities, Structures, Traffic, Landscape, and BIM teams. Attend client meetings and technical coordination meetings. Support proposal preparation and technical presentations. Resolve design issues during project execution. Monitor project progress against schedules and milestones. Leadership Responsibilities Supervise and mentor junior and design engineers. Review drawings and calculations prepared by team members. Allocate tasks and monitor team productivity. Ensure adherence to company QA/QC procedures. Support continuous improvement initiatives within the department. Qualifications Bachelor's Degree in Civil Engineering. Professional registration is an advantage. Master's Degree is a plus. Experience8–10 years of experience in road design engineering. Minimum 5 years in engineering consultancy. Experience in large-scale infrastructure projects. GCC project experience is an advantage. Technical Skills Autodesk Civil 3DAuto CADInfra Works Vehicle Tracking Autodesk Navisworks Bentley Open Roads Designer (preferred) Civil 3D Corridor Modeling Earthwork Calculations Quantity Take-Off Road Safety Standards Highway Design Standards BIM Coordination Microsoft Office

Key Responsibilities Technical Responsibilities Lead the geometric design of highways, urban roads, and local streets. Prepare road alignments, profiles, cross-sections, grading, and pavement layouts. Develop roadway design drawings and construction documents. Perform corridor modeling using Civil 3D or similar software. Coordinate horizontal and vertical alignments with utilities and drainage systems. Review and optimize road design for constructability, safety, and cost efficiency. Ensure compliance with project specifications and applicable design standards. Participate in feasibility studies, concept design, preliminary design, and detailed design stages. Prepare design calculations, technical reports, BOQs, and engineering documentation. Conduct design reviews and quality control checks before submission. Project Coordination Coordinate with Civil, Utilities, Structures, Traffic, Landscape, and BIM teams. Attend client meetings and technical coordination meetings. Support proposal preparation and technical presentations. Resolve design issues during project execution. Monitor project progress against schedules and milestones. Leadership Responsibilities Supervise and mentor junior and design engineers. Review drawings and calculations prepared by team members. Allocate tasks and monitor team productivity. Ensure adherence to company QA/QC procedures. Support continuous improvement initiatives within the department. Qualifications Bachelor's Degree in Civil Engineering. Professional registration is an advantage. Master's Degree is a plus. Experience8–10 years of experience in road design engineering. Minimum 5 years in engineering consultancy. Experience in large-scale infrastructure projects. GCC project experience is an advantage. Technical Skills Autodesk Civil 3DAuto CADInfra Works Vehicle Tracking Autodesk Navisworks Bentley Open Roads Designer (preferred) Civil 3D Corridor Modeling Earthwork Calculations Quantity Take-Off Road Safety Standards Highway Design Standards BIM Coordination Microsoft Office

Maximize sales of Material Handling Equipment" ( Forklift , Manlift , Scissor lift, etc ) Market Analysis & Prospecting: Identify and target key accounts in the Egyptian market, including large contractors, quarry operators, cement/concrete producers, and mining companies. Technical Consultation: Assess client operational needs (e.g., required crushing throughput, earthmoving capacity, concrete output) and propose the optimal heavy equipment solutions (crushers, batching plants, material handlers). Financial Modeling & Tendering: Prepare detailed technical and commercial proposals, including financing options (leasing/loans), total cost of ownership analysis, and warranty terms. Manage complex tender processes. Relationship Management: Build and maintain high-level relationships with decision-makers (Owners, GMs, Procurement Directors) in high-value client organizations. After-Sales Coordination: Work closely with the service department to ensure seamless delivery, commissioning, and reliable after-sales support/maintenance contracts Maximize sales of crushers, and products to our current and new customers through persistent sales prospecting activities focused on the assigned market. Ensure that related sales targets are met regarding unit sales and revenue crushers while giving due attention to the highest price realization.<br>Job Requirements Education: no need for an engineering Bachelor's degree. Proven work experience as a Sales Representative Excellent knowledge of MS Office Familiarity with CRM practices, along with the ability to build productive business professional relationships Highly motivated and target-driven with a proven track record in sales Excellent selling, negotiation, and communication skills Prioritizing, time management, and organizational skills Ability to create and deliver presentations tailored to the audience's needs Relationship management skills and openness to feedback Bachelor’s degree or a related field Car is a must Good command of the English language

Siemens EDA<br><br>Siemens EDA is a global technology leader in Electronic Design Automation software. Our software tools enable companies around the world to develop highly innovative electronic products faster and more cost-effectively. Our customers use our tools to push the boundaries of technology and physics to deliver better products in the increasingly complex world of chip, board, and system design.<br><br>Position Overview<br><br>We are seeking a Senior Software Engineer to join our dynamic development team. In this role, you will design, develop, and maintain core software systems that power our electronic design automation solutions. You'll work with cutting-edge technologies and collaborate with talented engineers globally to deliver high-quality software that drives innovation in the semiconductor industry.<br><br>Key Responsibilities<br><br>Develop and maintain robust C/C++ applications in Linux environments with a focus on performance and scalability. Design and implement user interfaces using modern C++ GUI frameworks such as wx Widgets and Qt. Collaborate with multi-functional teams to gather requirements, design solutions, and deliver features. Contribute to code reviews and mentor junior engineers to ensure code quality and best practices. Troubleshoot, diagnose, and resolve complex technical issues across the software stack. Participate in continuous integration and deployment processes using source control systems like SVN and Git.<br><br>Qualifications<br><br>Bachelor's degree in computer engineering. Experience in a similar role. Strong knowledge of C/C++ programming in a Linux development environment, with OOP proficiency and solid understanding of data structures and algorithms. Proficient understanding of GUI concepts and strong knowledge of C++ GUI frameworks (wx Widgets, Qt), with good knowledge of scripting languages such as Python, Perl, and/or Tcl. Experience with source control systems like SVN or Git. Familiarity with computer technology and x86 architecture is a plus.<br><br>Why Us<br><br>We are Siemens:<br><br>At Siemens Software, flexibility is how we work—hybrid by default, built on trust and autonomy. Together, 30,000 people across more than 200 countries build technology that shapes the real world. You'll grow through real projects, strong technical peers, and global mobility, backed by the scale and benefits of an industrial software leader. We're committed to equality and inclusion, and we hire based on merit, skills, and impact. Bring your curiosity and creativity and help us shape tomorrow!<br><br>Our Benefits & Rewards<br><br>The salary range for this position is USD 31,200 to USD 43,000 and this role is eligible to earn incentive compensation. The actual compensation offered is based on the successful candidate's job-related skills, experience, and relevant education/training. Siemens offers health and wellness benefits to employees; you can access the benefits available in your country via the link: https://jobs.sw.siemens.com/benefits/<br><br>We Value Equal Opportunities<br><br>We value equal opportunities and welcome applications from people with disabilities. At Siemens, we believe people who've had real experiences dealing with being different will excel as leaders. Let's foster a culture of creativity and innovation. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.<br><br>Siemens Software. Transform the Everyday

Staff Data Engineer<br>About the Role Intellias is looking for a Staff Data Engineer to join a large-scale digital healthcare initiative focused on building the data and AI foundations that power personalized healthcare experiences. This is a Staff-level Individual Contributor role for an engineer who combines deep data engineering expertise with distributed systems thinking, backend development, and technical leadership. You will design and build scalable data infrastructure, solve complex cross-platform engineering challenges, and establish technical patterns and standards adopted across multiple engineering teams. The role is highly hands-on while also requiring the ability to provide technical direction, mentor experienced engineers, and influence architecture across the broader platform.<br>Project Overview The project is building a FHIR-based healthcare data platform that integrates data from EHRs, healthcare applications, wearables, portals, and other sources to enable connected and personalized healthcare experiences. The platform supports:Real-time and batch data processing Operational and analytical workloads Healthcare interoperability Data-intensive product capabilities Machine learning and AI use cases Scalable, cloud-native data infrastructure<br>The technology landscape includes Python, PySpark, Apache Spark, Kafka, Duck DB, Prefect/Airflow, Fast API, Mongo DB, Docker, Kubernetes, and cloud-native infrastructure. The core engineering challenge is to build secure, reliable, and scalable data foundations capable of processing heterogeneous healthcare data while supporting product engineering, analytics, machine learning, and emerging AI capabilities.<br>What You’ll DoDesign and implement solutions for large-scale, ambiguous data engineering and distributed-systems challenges. Architect, build, and evolve real-time and batch data infrastructure supporting operational, analytical, and AI/ML workloads. Design and scale event-driven data pipelines using technologies such as Kafka, Spark, and PySpark. Build production backend services and APIs using Python and Fast API to support data and platform capabilities. Define scalable approaches to data ingestion, transformation, modeling, validation, storage, and delivery. Design data architectures that address schema evolution, data quality, heterogeneous data integration, scalability, and operational reliability. Establish and champion technical standards, architectural patterns, engineering best practices, and reusable platform components. Serve as a cross-team technical authority for data systems, distributed processing, pipelines, and platform architecture. Improve the reliability, scalability, performance, and cost efficiency of data infrastructure. Implement robust observability, logging, monitoring, and alerting across distributed data systems. Design systems with security, privacy, healthcare compliance, and scalability built in from the beginning. Improve engineering workflows, CI/CD pipelines, automated testing, and production deployment practices. Collaborate closely with Product, ML/AI, Platform, Infrastructure, and application engineering teams to develop shared data capabilities. Provide technical mentorship through architecture reviews, design discussions, pairing, and knowledge sharing. Evaluate emerging data and AI technologies and introduce them where they provide measurable improvements to platform capabilities or engineering efficiency. Remain hands-on with production engineering, validating architectural decisions through implementation and operational experience.<br>What You Bring Required Qualifications8+ years of professional software and data engineering experience, including at least 3 years working with large-scale distributed data systems. Deep expertise designing and building scalable data platforms, pipelines, and distributed processing systems. Strong hands-on proficiency in Python, with production experience using technologies and libraries such as PySpark, Pandas, and Fast API. Strong experience with Apache Spark/PySpark and distributed data processing at scale. Experience designing and implementing real-time and batch data pipelines using Kafka, Spark, or comparable distributed processing technologies. Strong understanding of data architecture, data modeling, schema evolution, data quality, and heterogeneous data integration. Experience with workflow orchestration technologies such as Prefect, Apache Airflow, or equivalent. Experience building production backend services and APIs supporting data and platform capabilities. Strong SQL skills and hands-on experience with modern data storage technologies, including relational and NoSQL databases such as Mongo DB. Strong understanding of distributed systems principles, including scalability, reliability, fault tolerance, consistency, and performance. Experience designing and implementing observability, logging, monitoring, and alerting for distributed data systems. Strong cloud-native engineering experience, including Docker, Kubernetes, CI/CD, and production deployment practices. Proven ability to independently design solutions for ambiguous, large-scale engineering problems spanning multiple systems and teams. Demonstrated experience establishing technical standards, engineering patterns, development practices, and reusable platform capabilities. Strong technical leadership skills, including experience mentoring senior engineers, conducting design reviews, and influencing architecture without formal people-management authority. Strong understanding of security, privacy, and data protection principles for production data platforms. Professional English proficiency sufficient for direct collaboration with U. S.-based engineering, product, ML, and platform teams. Bachelor's degree in computer science, Engineering, or a related field.<br>Nice to Have Experience with FHIR, HL7, C-CDA, or other healthcare interoperability standards. Previous experience in healthcare, Health Tech, or another regulated data environment. Understanding of HIPAA, HITECH, or comparable data privacy and compliance requirements. Experience deploying or supporting LLMs, ML models, AI-enabled data products, or retrieval-based systems. Experience building data infrastructure supporting ML/AI workloads and production inference. Hands-on experience with observability technologies such as Open Telemetry, Datadog, Prometheus, or similar platforms. Experience with Duck DB or modern analytical data-processing technologies. Experience with AI-assisted engineering tools such as Claude Code, Git Hub Copilot, Cursor, or comparable solutions. Contributions to open-source projects or publicly available engineering initiatives.<br>Why Join This Initiative? This role offers the opportunity to shape the data and AI foundations of a modern healthcare platform operating at significant scale. You will work on technically complex challenges spanning:Distributed data processing Event-driven architectures Backend services Cloud-native infrastructure Healthcare interoperability Data platform architecture AI/ML enablement<br>As a Staff-level Individual Contributor, your impact will extend well beyond individual services or pipelines. You will establish architectural patterns, influence technical decisions across teams, mentor experienced engineers, and help define how the broader engineering organization builds and operates data-intensive systems. At the same time, this is fundamentally a hands-on engineering role. You will design systems, build critical components, validate architectural decisions through code, and remain closely connected to how systems behave in production. This position is particularly well suited for an engineer who wants to combine deep technical expertise with organization-wide engineering influence while building data infrastructure that directly enables better healthcare products and emerging AI capabilities.

Key Responsibilities Technical Responsibilities Lead the geometric design of highways, urban roads, and local streets. Prepare road alignments, profiles, cross-sections, grading, and pavement layouts. Develop roadway design drawings and construction documents. Perform corridor modeling using Civil 3D or similar software. Coordinate horizontal and vertical alignments with utilities and drainage systems. Review and optimize road design for constructability, safety, and cost efficiency. Ensure compliance with project specifications and applicable design standards. Participate in feasibility studies, concept design, preliminary design, and detailed design stages. Prepare design calculations, technical reports, BOQs, and engineering documentation. Conduct design reviews and quality control checks before submission. Project Coordination Coordinate with Civil, Utilities, Structures, Traffic, Landscape, and BIM teams. Attend client meetings and technical coordination meetings. Support proposal preparation and technical presentations. Resolve design issues during project execution. Monitor project progress against schedules and milestones. Leadership Responsibilities Supervise and mentor junior and design engineers. Review drawings and calculations prepared by team members. Allocate tasks and monitor team productivity. Ensure adherence to company QA/QC procedures. Support continuous improvement initiatives within the department. Qualifications Bachelor's Degree in Civil Engineering. Professional registration is an advantage. Master's Degree is a plus. Experience8–10 years of experience in road design engineering. Minimum 5 years in engineering consultancy. Experience in large-scale infrastructure projects. GCC project experience is an advantage. Technical Skills Autodesk Civil 3DAuto CADInfra Works Vehicle Tracking Autodesk Navisworks Bentley Open Roads Designer (preferred) Civil 3D Corridor Modeling Earthwork Calculations Quantity Take-Off Road Safety Standards Highway Design Standards BIM Coordination Microsoft Office

Job Purpose Supervise all activities to ensure fulfilment of customer's requirement relating to products, ensure that all Inward material components meet specification and to provide the confidence to the organization that all sub-assemblies and sub sequent processes are conforming to requirement and finally all submitted products are totally conforming to customer requirements.<br>Responsibilities Supervise the Q. C staff engaged in inspection and testing activities. Participate Q. C Manager in providing technical expertise to all Q. C team. Evaluating Q. C team performance against their Job requirement and assign training needs to upgrade their skills. Assist Q. C Manager in preparing Quality Control objectives on annual bases. Participate Q. C Manager in interpretation of Quality to key personnel in the organization. Interacting with suppliers to improve their performance and to be sure of their supply conformity. Supervise implementing statistical tools for analyzing product related inspection and / or testing data. Participate with production manager and other interested parties to prevent or eliminate the cause of product defect. Supervise creating, documenting, maintaining and implementing the inspection and or test criteria. Supervise and manager all inspection and test activities and related activities throughout production cycle. Report regularly to Q. C Manager analytical data about product quality in different phases (In ward Inspection, In Process Inspection – Final Inspection). Supervise and monitor activities including inspections, Testing, Design, Validation, Calibration, Test Methods and Infrastructure. Participate with relevant company managers to study the cause of defect regarding each customer complaint to prevent recurrence. Supervise and implement the requirement of quality management system ISO 9001- requirement. Support QA department to implement the requirement of environmental management system ISO 14001-2015 or equivalent. Supervise the implementation of calibration program including the definition of Calibration range, calibration frequency and internal and/ or external calibration. Supervise and monitor Quality related cost in order to continuously reduce quality related activities cost (Including appraisal prevention and failure cost). Prepare the complete Quality control plan for all products reporting all activities to Qc manager in monthly base for all production and defected parts.<br>Qualifications BSc of Engineering (mechanical or electrical) or BSc of science. Minimum 3 years' experience in QC. Experience in the field of electrical products. Good background of Quality management system ISO 9001. Very Good English language – good practice in using MS-Office application.<br>Job Summary Supervise all Q. C activity to ensure the compliance of Inward Raw Material to designated specifications and to ensure conforming of subassemblies and processed material to the design specification and to ensure the compliance of finished product to customer requirement.

Job Purpose Supervise all activities to ensure fulfilment of customer's requirement relating to products, ensure that all Inward material components meet specification and to provide the confidence to the organization that all sub-assemblies and sub sequent processes are conforming to requirement and finally all submitted products are totally conforming to customer requirements.<br>Responsibilities Supervise the Q. C staff engaged in inspection and testing activities. Participate Q. C Manager in providing technical expertise to all Q. C team. Evaluating Q. C team performance against their Job requirement and assign training needs to upgrade their skills. Assist Q. C Manager in preparing Quality Control objectives on annual bases. Participate Q. C Manager in interpretation of Quality to key personnel in the organization. Interacting with suppliers to improve their performance and to be sure of their supply conformity. Supervise implementing statistical tools for analyzing product related inspection and / or testing data. Participate with production manager and other interested parties to prevent or eliminate the cause of product defect. Supervise creating, documenting, maintaining and implementing the inspection and or test criteria. Supervise and manager all inspection and test activities and related activities throughout production cycle. Report regularly to Q. C Manager analytical data about product quality in different phases (In ward Inspection, In Process Inspection – Final Inspection). Supervise and monitor activities including inspections, Testing, Design, Validation, Calibration, Test Methods and Infrastructure. Participate with relevant company managers to study the cause of defect regarding each customer complaint to prevent recurrence. Supervise and implement the requirement of quality management system ISO 9001- requirement. Support QA department to implement the requirement of environmental management system ISO 14001-2015 or equivalent. Supervise the implementation of calibration program including the definition of Calibration range, calibration frequency and internal and/ or external calibration. Supervise and monitor Quality related cost in order to continuously reduce quality related activities cost (Including appraisal prevention and failure cost). Prepare the complete Quality control plan for all products reporting all activities to Qc manager in monthly base for all production and defected parts.<br>Qualifications BSc of Engineering (mechanical or electrical) or BSc of science. Minimum 3 years' experience in QC. Experience in the field of electrical products. Good background of Quality management system ISO 9001. Very Good English language – good practice in using MS-Office application.<br>Job Summary Supervise all Q. C activity to ensure the compliance of Inward Raw Material to designated specifications and to ensure conforming of subassemblies and processed material to the design specification and to ensure the compliance of finished product to customer requirement.

Job Purpose Supervise all activities to ensure fulfilment of customer's requirement relating to products, ensure that all Inward material components meet specification and to provide the confidence to the organization that all sub-assemblies and sub sequent processes are conforming to requirement and finally all submitted products are totally conforming to customer requirements.<br>Responsibilities Supervise the Q. C staff engaged in inspection and testing activities. Participate Q. C Manager in providing technical expertise to all Q. C team. Evaluating Q. C team performance against their Job requirement and assign training needs to upgrade their skills. Assist Q. C Manager in preparing Quality Control objectives on annual bases. Participate Q. C Manager in interpretation of Quality to key personnel in the organization. Interacting with suppliers to improve their performance and to be sure of their supply conformity. Supervise implementing statistical tools for analyzing product related inspection and / or testing data. Participate with production manager and other interested parties to prevent or eliminate the cause of product defect. Supervise creating, documenting, maintaining and implementing the inspection and or test criteria. Supervise and manager all inspection and test activities and related activities throughout production cycle. Report regularly to Q. C Manager analytical data about product quality in different phases (In ward Inspection, In Process Inspection – Final Inspection). Supervise and monitor activities including inspections, Testing, Design, Validation, Calibration, Test Methods and Infrastructure. Participate with relevant company managers to study the cause of defect regarding each customer complaint to prevent recurrence. Supervise and implement the requirement of quality management system ISO 9001- requirement. Support QA department to implement the requirement of environmental management system ISO 14001-2015 or equivalent. Supervise the implementation of calibration program including the definition of Calibration range, calibration frequency and internal and/ or external calibration. Supervise and monitor Quality related cost in order to continuously reduce quality related activities cost (Including appraisal prevention and failure cost). Prepare the complete Quality control plan for all products reporting all activities to Qc manager in monthly base for all production and defected parts.<br>Qualifications BSc of Engineering (mechanical or electrical) or BSc of science. Minimum 3 years' experience in QC. Experience in the field of electrical products. Good background of Quality management system ISO 9001. Very Good English language – good practice in using MS-Office application.<br>Job Summary Supervise all Q. C activity to ensure the compliance of Inward Raw Material to designated specifications and to ensure conforming of subassemblies and processed material to the design specification and to ensure the compliance of finished product to customer requirement.

Job Purpose Supervise all activities to ensure fulfilment of customer's requirement relating to products, ensure that all Inward material components meet specification and to provide the confidence to the organization that all sub-assemblies and sub sequent processes are conforming to requirement and finally all submitted products are totally conforming to customer requirements.<br>Responsibilities Supervise the Q. C staff engaged in inspection and testing activities. Participate Q. C Manager in providing technical expertise to all Q. C team. Evaluating Q. C team performance against their Job requirement and assign training needs to upgrade their skills. Assist Q. C Manager in preparing Quality Control objectives on annual bases. Participate Q. C Manager in interpretation of Quality to key personnel in the organization. Interacting with suppliers to improve their performance and to be sure of their supply conformity. Supervise implementing statistical tools for analyzing product related inspection and / or testing data. Participate with production manager and other interested parties to prevent or eliminate the cause of product defect. Supervise creating, documenting, maintaining and implementing the inspection and or test criteria. Supervise and manager all inspection and test activities and related activities throughout production cycle. Report regularly to Q. C Manager analytical data about product quality in different phases (In ward Inspection, In Process Inspection – Final Inspection). Supervise and monitor activities including inspections, Testing, Design, Validation, Calibration, Test Methods and Infrastructure. Participate with relevant company managers to study the cause of defect regarding each customer complaint to prevent recurrence. Supervise and implement the requirement of quality management system ISO 9001- requirement. Support QA department to implement the requirement of environmental management system ISO 14001-2015 or equivalent. Supervise the implementation of calibration program including the definition of Calibration range, calibration frequency and internal and/ or external calibration. Supervise and monitor Quality related cost in order to continuously reduce quality related activities cost (Including appraisal prevention and failure cost). Prepare the complete Quality control plan for all products reporting all activities to Qc manager in monthly base for all production and defected parts.<br>Qualifications BSc of Engineering (mechanical or electrical) or BSc of science. Minimum 3 years' experience in QC. Experience in the field of electrical products. Good background of Quality management system ISO 9001. Very Good English language – good practice in using MS-Office application.<br>Job Summary Supervise all Q. C activity to ensure the compliance of Inward Raw Material to designated specifications and to ensure conforming of subassemblies and processed material to the design specification and to ensure the compliance of finished product to customer requirement.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>A Lead Mechanical Engineer&nbsp;</span></p><br><br> Missions/Main Duties <br><p>To lead the mechanical engineering discipline by ensuring that all designs, materials, and installations meet rigorous technical and regulatory standards. You will act as the client's technical authority, bridging the gap between design intent and field execution—verifying that shop drawings align with specifications and that on-site construction work is executed correctly, safely, and efficiently, particularly within the demanding environment of rail and transit projects.</p><br><br>Main Duties &amp; Responsibilities<p><strong>The day-to-day and project-based tasks:</strong></p><br><br><p><strong>Design Review &amp; Compliance:</strong>&nbsp;Lead the technical review of mechanical designs (HVAC, plumbing, fire protection) developed by internal teams or external consultants. Ensure all designs comply with project specifications, relevant codes (IBC, IMC, UPC, ASHRAE), and rail-specific standards (e.g., NFPA 130).</p><br><br><br><p><strong>Shop Drawing &amp; Submittal Approval:</strong>&nbsp;Manage the thorough review and approval of all mechanical shop drawings, product data, and material samples. Verify that submitted materials and equipment conform to the contract documents and design intent before fabrication or procurement begins.</p><br><br><br><p><strong>Site Works Inspection &amp; Quality Control:</strong>&nbsp;Conduct regular site visits and inspections to monitor the progress and quality of mechanical installations. Identify discrepancies, deficiencies, or non-conforming work, and issue clear directives for corrective actions.</p><br><br><br><p><strong>Rail &amp; Transit Specialization:</strong>&nbsp;Apply deep domain expertise to oversee mechanical systems for rail projects, addressing unique challenges such as ventilation for tunnels and below-grade stations, smoke extraction systems, platform pressurization, and the specific environmental control needs of rail operations and equipment rooms.</p><br><br><br><p><strong>Construction Support &amp; Issue Resolution:</strong>&nbsp;Serve as the primary mechanical point of contact during construction. Review and respond to Requests for Information (RFIs) and troubleshoot complex field issues, providing practical solutions that maintain design integrity without delaying project timelines.</p><br><br><br><p><strong>Technical Leadership:</strong>&nbsp;Serve as the technical authority on mechanical engineering, resolving complex engineering challenges and performing peer reviews of design calculations, drawings, and specifications.</p><br><br><br><p><strong>Client &amp; Stakeholder Communication:</strong>&nbsp;Attend client meetings to present mechanical designs, explain technical concepts to non-technical stakeholders, and manage client expectations regarding system performance and cost.</p><br><br> Profile/Skills <br><p><strong>Education:</strong> Bachelor’s degree in mechanical engineering (master’s degree preferred).</p><br><br><br><p><strong>Licensure:</strong>&nbsp;Professional Engineer (PE) license is required.</p><br><br><br><p><strong>Experience:</strong> 8-10<strong>&nbsp;years</strong>&nbsp;of progressive experience in MEP consulting engineering or a design-build firm, specifically focused on building systems.</p><br><br><br><p><strong>Rail Experience:</strong>&nbsp;Demonstrated and significant experience working on&nbsp;<strong>rail or transit projects</strong>&nbsp;(e.g., commuter rail, light rail, subway, or high-speed rail stations and facilities).</p><br><br> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>On-site</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>A Lead Mechanical Engineer&nbsp;</span></p><br><br> Missions/Main Duties <br><p>To lead the mechanical engineering discipline by ensuring that all designs, materials, and installations meet rigorous technical and regulatory standards. You will act as the client's technical authority, bridging the gap between design intent and field execution—verifying that shop drawings align with specifications and that on-site construction work is executed correctly, safely, and efficiently, particularly within the demanding environment of rail and transit projects.</p><br><br>Main Duties &amp; Responsibilities<p><strong>The day-to-day and project-based tasks:</strong></p><br><br><p><strong>Design Review &amp; Compliance:</strong>&nbsp;Lead the technical review of mechanical designs (HVAC, plumbing, fire protection) developed by internal teams or external consultants. Ensure all designs comply with project specifications, relevant codes (IBC, IMC, UPC, ASHRAE), and rail-specific standards (e.g., NFPA 130).</p><br><br><br><p><strong>Shop Drawing &amp; Submittal Approval:</strong>&nbsp;Manage the thorough review and approval of all mechanical shop drawings, product data, and material samples. Verify that submitted materials and equipment conform to the contract documents and design intent before fabrication or procurement begins.</p><br><br><br><p><strong>Site Works Inspection &amp; Quality Control:</strong>&nbsp;Conduct regular site visits and inspections to monitor the progress and quality of mechanical installations. Identify discrepancies, deficiencies, or non-conforming work, and issue clear directives for corrective actions.</p><br><br><br><p><strong>Rail &amp; Transit Specialization:</strong>&nbsp;Apply deep domain expertise to oversee mechanical systems for rail projects, addressing unique challenges such as ventilation for tunnels and below-grade stations, smoke extraction systems, platform pressurization, and the specific environmental control needs of rail operations and equipment rooms.</p><br><br><br><p><strong>Construction Support &amp; Issue Resolution:</strong>&nbsp;Serve as the primary mechanical point of contact during construction. Review and respond to Requests for Information (RFIs) and troubleshoot complex field issues, providing practical solutions that maintain design integrity without delaying project timelines.</p><br><br><br><p><strong>Technical Leadership:</strong>&nbsp;Serve as the technical authority on mechanical engineering, resolving complex engineering challenges and performing peer reviews of design calculations, drawings, and specifications.</p><br><br><br><p><strong>Client &amp; Stakeholder Communication:</strong>&nbsp;Attend client meetings to present mechanical designs, explain technical concepts to non-technical stakeholders, and manage client expectations regarding system performance and cost.</p><br><br> Profile/Skills <br><p><strong>Education:</strong> Bachelor’s degree in mechanical engineering (master’s degree preferred).</p><br><br><br><p><strong>Licensure:</strong>&nbsp;Professional Engineer (PE) license is required.</p><br><br><br><p><strong>Experience:</strong> 8-10<strong>&nbsp;years</strong>&nbsp;of progressive experience in MEP consulting engineering or a design-build firm, specifically focused on building systems.</p><br><br><br><p><strong>Rail Experience:</strong>&nbsp;Demonstrated and significant experience working on&nbsp;<strong>rail or transit projects</strong>&nbsp;(e.g., commuter rail, light rail, subway, or high-speed rail stations and facilities).</p><br><br> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>On-site</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

· Location : Alexandria, Egypt (field-based — Borg el Arab, A`amerya,Sadat City)· 0–5 years experience * Fresh grads welcome. For 30+ years, IDM has supplied Egypt’s heavy industry with the lubricants, filtration, and repair solutions that keep production lines, fleets, and heavy equipment running — including Schaeffer, a globallyrecognized name in industrial lubrication. We’re growing our field sales team and looking for Sales Engineers who want to build their own territory, not just manage an account list. What You’ll Do ? · Own a territory: identify and visit prospective industrial, marine/petroleum, construction, and fleet customers — not just service existing accounts.· Sell our core product lines : advanced lubricants, fuel and oil filters, filtration units, and repair weldingalloys for industrial machinery, trucks, buses, generators, constructionequipment, hydraulics, and turbines.· Run on-site workshop visits and hands-on field demonstrations, including cost-feasibility studies andtrial installations - Diagnose mechanical issues on customerequipment and recommend the right IDM product or repair solution. Build proposals, negotiate pricing, and follow through on delivery, repairs, and payment - Report results back to customers and to IDM to keep growing the relationship. What We Offer ? · International technical and commercial training -· High commission structure + expenses, on top of a solid learning curve into industrial sales.· Car allowance · A clear path to international staff roles .· potential relocation to the Middle East or Africa with our distributor network .· Access to a unique, technically differentiated product line few competitors can match . What We’re Looking For ? · A degree in Mechanical Engineering (or equivalent) · 0–5 years in sales, mechanical engineering, or maintenance-related roles.— fresh grads with the right drive are genuinely welcome .· Comfortable being in the field daily (workshops, plants, job sites) rather than at a desk· Own a car and are based in or near Cairo· Strong communicator who’s motivated by solving technical problems and closing deals, not just relationship-servicing. · Bonus: exposure to petroleum, heavy equipment, fleet, marine, or generator maintenance

· Location : Alexandria, Egypt (field-based — Aamerya , Borg el Arab ,Sadat City)· 0–5 years experience * Fresh grads welcome. For 30+ years, IDM has supplied Egypt’s heavy industry with the lubricants, filtration, and repair solutions that keep production lines, fleets, and heavy equipment running — including Schaeffer, a globallyrecognized name in industrial lubrication. We’re growing our field sales team and looking for Sales Engineers who want to build their own territory, not just manage an account list. What You’ll Do ? · Own a territory: identify and visit prospective industrial, marine/petroleum, construction, and fleet customers — not just service existing accounts.· Sell our core product lines : advanced lubricants, fuel and oil filters, filtration units, and repair weldingalloys for industrial machinery, trucks, buses, generators, constructionequipment, hydraulics, and turbines.· Run on-site workshop visits and hands-on field demonstrations, including cost-feasibility studies andtrial installations - Diagnose mechanical issues on customerequipment and recommend the right IDM product or repair solution. Build proposals, negotiate pricing, and follow through on delivery, repairs, and payment - Report results back to customers and to IDM to keep growing the relationship. What We Offer ? · International technical and commercial training -· High commission structure + expenses, on top of a solid learning curve into industrial sales.· Car allowance · A clear path to international staff roles .· potential relocation to the Middle East or Africa with our distributor network .· Access to a unique, technically differentiated product line few competitors can match . What We’re Looking For ? · A degree in Mechanical Engineering (or equivalent) · 0–5 years in sales, mechanical engineering, or maintenance-related roles.— fresh grads with the right drive are genuinely welcome .· Comfortable being in the field daily (workshops, plants, job sites) rather than at a desk· Own a car and are based in or near Cairo· Strong communicator who’s motivated by solving technical problems and closing deals, not just relationship-servicing. · Bonus: exposure to petroleum, heavy equipment, fleet, marine, or generator maintenance

· Location : Alexandria, Egypt (field-based — Borg El Arab , El Aamerya ,Sadat)· 0–5 years experience * Fresh grads welcome. For 30+ years, IDM has supplied Egypt’s heavy industry with the lubricants, filtration, and repair solutions that keep production lines, fleets, and heavy equipment running — including Schaeffer, a globallyrecognized name in industrial lubrication. We’re growing our field sales team and looking for Sales Engineers who want to build their own territory, not just manage an account list. What You’ll Do ? · Own a territory: identify and visit prospective industrial, marine/petroleum, construction, and fleet customers — not just service existing accounts.· Sell our core product lines : advanced lubricants, fuel and oil filters, filtration units, and repair weldingalloys for industrial machinery, trucks, buses, generators, constructionequipment, hydraulics, and turbines.· Run on-site workshop visits and hands-on field demonstrations, including cost-feasibility studies andtrial installations - Diagnose mechanical issues on customerequipment and recommend the right IDM product or repair solution. Build proposals, negotiate pricing, and follow through on delivery, repairs, and payment - Report results back to customers and to IDM to keep growing the relationship. What We Offer ? · International technical and commercial training -· High commission structure + expenses, on top of a solid learning curve into industrial sales.· Car allowance · A clear path to international staff roles .· potential relocation to the Middle East or Africa with our distributor network .· Access to a unique, technically differentiated product line few competitors can match . What We’re Looking For ? · A degree in Mechanical Engineering (or equivalent) · 0–5 years in sales, mechanical engineering, or maintenance-related roles.— fresh grads with the right drive are genuinely welcome .· Comfortable being in the field daily (workshops, plants, job sites) rather than at a desk· Own a car and are based in or near Cairo· Strong communicator who’s motivated by solving technical problems and closing deals, not just relationship-servicing. · Bonus: exposure to petroleum, heavy equipment, fleet, marine, or generator maintenance

A tech company that built a platform for availing and operating electric two and three-wheelers through a smart end-to-end solution that makes urban riding greener, easier and cost effective. It aims at revolutionizing electric mobility, dedicated to reducing carbon footprint with our innovative battery swapping technology, changing the way people commute and enhancing urban life.<br>Through the platform, users are offered multiple options for electrifying their vehicles, either by converting the ICE motorcycles or tricycles to purchasing a brand new electric one. It is further facilitating the e-mobility shift and laying the grounds for localized EV manufacturing.<br>Job Description:<br>* The role will include manual and automation testing, with automation testing including Web and Mobile automation.* Responsible for ensuring high product quality across web and mobile platforms.* Drive continuous improvement in QA processes, tools, and frameworks.* Lead the design and implementation of comprehensive testing strategies and plans.* Support junior QA engineers, promoting best practices in manual testing and test automation.* Collaborate with cross-functional teams including business (product) and technical (development and Dev Ops), to integrate testing into the development lifecycle and to take decisions regarding quality, scope and timeline of releases.* Apply manual testing and develop and maintain automated test scripts for both web and mobile applications, using tools like Selenium and Appium.<br>Job Requirements:<br>* 2-4 years of experience in software QC plus experience in test automation.* Proficient in web and mobile automation testing with **Selenium**, **Appium**, or relevant testing frameworks.* Proficient with testing scripting in at least one of language of C#, Java, or Python.* Familiarity with C++ or Java Script.* Familiarity with test management tools and bug tracking systems.* Understanding of REST APIs and backend testing.* Experience working in Agile/Scrum environments.* Strong analytical, problem-solving, and communication skills.* Familiarity and experience using performance testing tools (e.g. JMeter).