Ship Mechanic Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>About the job </b>KEY RESPONSIBILITIES AND DUTIES: Preparing the annual preventive maintenance plan by coordinating with production, Quality, and planning department. Supervising the execution of preventive maintenance actions. Supervising the execution of the corrective actions to minimize machines / utilities equipment stoppages. Training of mechanical /electrical technicians on the assigned area s machines and equipment. Ensuring recording of the technical breakdowns in log books for all machines / utilities equipment. Preparing list for the required mechanical / electrical spare parts for all the assigned machines /utilities equipment every year and execute the plan according to the approved budget. Continuous updating of maintenance SOP s. Localization of machine spare parts and developing in house solution which shall decrease the machine / utilities equipment running cost. Participating in the lean task force which affect the manufacturing process efficiency and minimize waste and cost. Closing the audits pending points with QA for concerned mechanical issues. Supervise technicians according to organization chart. HSE Responsibilities: Follow the approved HSE policy and requirements. Following and approving the work permit prior to contractors work start &amp; prior to the start of any routine / un routine work process with significant risk. Follow the lockout/Tagout procedures during maintenance and repair. Commitment to the appropriate PPE s use Following the statutory legislation concerning Health, Safety and environmental law. Implementing controls for waste, resources management and pollution control to minimize the impact on the local environment. HSE Responsibilities in case joining HSE Excellence team: Facilitate and guide the employees to implement the HSE&amp;En. Policies. Implement all applicable standards and guides of Sanofi-Aventis in his/her area. Ensure from complying with all legal and Sanofi-Aventis requirements. Lead his/her team to implement the HSE &amp; EnMS PASS. Train his/her team on HSE &amp; EnMS procedures, SOP s and MSDS. Report any accidents/incidents in his/her area to the HSE department. Lead his/her team for investigate accidents/incidents to define the root cause. Support the area manager for takes the corrective and preventive actions to eliminate reoccurrence of any Environmental or Energy nonconformance. Support the area manager for takes the corrective and preventive actions to eliminate reoccurrence of any accident/incident. Sharing for HSE / EnMS inspection program, take the corrective actions for any violations in his/her area. Lead the team of his/her area for doing full risk assessment and Environmental aspects studies. Define and control the required PPE s for his/her area. Define the list of CMR and it s operational control for Quality labs and production areas. Control the first aid kits in his/her area. Leading his/her team for control the significant hazards /aspects and Energy use. Others: Perform other duties as assigned. Respect of company s values, code of ethics and social charter. Respect of personal data protection charter. Responsible for applying the HSE related requirements for the company in all related working procedures.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>JOB-HOLDER s ENTRY REQUIREMENTS</b>: Education: Bachelor s Degree in Electrical Engineering Related Experience: At least 6 month - 2 Years of related experience in Pharmaceutical is highly preferred. FMCG background will be considered as an equivalent alternative. SCADA and PLC Expertise : Candidates with formal training or certification in SCADA (Supervisory Control and Data Acquisition) and PLC (Programmable Logic Controller) systems are highly preferred. Special Knowledge/Skills: Ability to work under stresses. multitasking Good leadership skills. Good communication skills. Have a team work spirit. Have appropriate HSE Knowledge. Competencies: Stretch to go beyond the level we have operated at up until now Take actions instead of waiting to be told what to do Act in the interest of our patients and customers Put the interests of the organization ahead of my own or those of our team Act for Change, Strive for results, Cooperate Transversally, Commit to Customer Think Strategically, Lead Teams, Develop People, Make Decisions Pursue progress , discover extraordinary Better is out there. Better medications, better outcomes, better science. But progress doesn t happen without people people from different backgrounds, in different locations, doing different roles, all united by one thing: a desire to make miracles happen. So, let be those people. At Sanofi, we provide equal opportunities to all regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, ability or gender identity. Watch our ALL IN video and check out our Diversity Equity and Inclusion actions at sanofi.com !</p><p></p></section>

IMEA (India, Middle East, Africa) Egypt LE_0170-GROME Trading Limited (L. L. C.) Employee Assignment Not remote Full Time 1 October 2026<br><br>Role Purpose<br><br>Primary purpose of this role is to effectively manage own warehouse and distribution facility & / or manage service levels of contracted 3rd Party Logistic service provider. Aim is to effectively store, manage, inventory of finished goods or components, recording and accurate reporting of stock levels, performing cycle counts & wall to wall counts, reconciliation of inventory with WMS & SAP & manage cost efficient inbound & outbound logistical activity.<br><br>Responsibilities<br><br>Act / Liaison in capacity of Import manager with Customs, GOIEC & GAFI. Be responsible for accurate recording and reporting of inbound / outbound goods movement. Have a plan for weekly & monthly inventory cycle count as well as periodic wall to wall counts Reconcile inventory at agreed intervals, externally (customs records) as well as internally with WMS / ERP systems. Ensure bin health and location accuracy of inventory in ERP as well as WMS. Ensure application of FIFO during outbound process. Monitoring and reporting of SMOS inventory along with proposed action plan. Ensure the Material Master and Storage Bin master data in SAP are accurately maintained for optimal stock placement and removal. Ensure ease of handling / efficient pick pack process by identifying inventory into ABC classification and storing it in bin location accordingly. Monitor and control pick pack ship process within agreed time frame and trouble shoot procedural / performance gap to ensure lean and continuous improvement mindset. Track 3PL metrics including order picking accuracy, on-time delivery rates, and receiving turnaround times. Review 3PL invoices against contracted rates for storage, handling, and shipping, processing approvals within SAP MM. Ensure released products imported are compliant with local regulations. Coordinating with transport companies for distribution of goods, after importation, to customers warehouse of Grome Trading warehouse. Be responsible to monitor transportation cost as well as exbibit mindset of continuous improvement by critically reviewing as is situation to offer cost effective solutions. Maintains warehouse staff by recruiting, selecting, orienting, and training employees. Maintains warehouse staff job results by coaching, counseling, and disciplining employees; planning, monitoring, and appraising job result. Comply with laws, rules & regulations & meet cost, productivity, accuracy and timeliness targets. Always ensure Supply Chain Security and Safety of warehouse and its staff.<br><br>Qualifications And Experience<br><br>Bachelor’s degree in business administration, Logistics or Supply Chain. Fluent - Excellent communication skills (Arabic & English) Proven working experience 8 years as a Warehouse/Logistics manager. Expertise in warehouse management procedures and best practices. Proven ability to implement process improvement initiatives. Strong knowledge of warehousing Key Performance Indicators (KPIs). Hands on experience with warehouse management software and databases (SAP ). Leadership skills and ability manage staff. Strong decision making and problem-solving skills.

IMEA (India, Middle East, Africa) Egypt LE_0170-GROME Trading Limited (L. L. C.) Employee Assignment Not remote Full Time 1 October 2026<br><br>Role Purpose<br><br>Primary purpose of this role is to effectively manage own warehouse and distribution facility & / or manage service levels of contracted 3rd Party Logistic service provider. Aim is to effectively store, manage, inventory of finished goods or components, recording and accurate reporting of stock levels, performing cycle counts & wall to wall counts, reconciliation of inventory with WMS & SAP & manage cost efficient inbound & outbound logistical activity.<br><br>Responsibilities<br><br>Act / Liaison in capacity of Import manager with Customs, GOIEC & GAFI. Be responsible for accurate recording and reporting of inbound / outbound goods movement. Have a plan for weekly & monthly inventory cycle count as well as periodic wall to wall counts Reconcile inventory at agreed intervals, externally (customs records) as well as internally with WMS / ERP systems. Ensure bin health and location accuracy of inventory in ERP as well as WMS. Ensure application of FIFO during outbound process. Monitoring and reporting of SMOS inventory along with proposed action plan. Ensure the Material Master and Storage Bin master data in SAP are accurately maintained for optimal stock placement and removal. Ensure ease of handling / efficient pick pack process by identifying inventory into ABC classification and storing it in bin location accordingly. Monitor and control pick pack ship process within agreed time frame and trouble shoot procedural / performance gap to ensure lean and continuous improvement mindset. Track 3PL metrics including order picking accuracy, on-time delivery rates, and receiving turnaround times. Review 3PL invoices against contracted rates for storage, handling, and shipping, processing approvals within SAP MM. Ensure released products imported are compliant with local regulations. Coordinating with transport companies for distribution of goods, after importation, to customers warehouse of Grome Trading warehouse. Be responsible to monitor transportation cost as well as exbibit mindset of continuous improvement by critically reviewing as is situation to offer cost effective solutions. Maintains warehouse staff by recruiting, selecting, orienting, and training employees. Maintains warehouse staff job results by coaching, counseling, and disciplining employees; planning, monitoring, and appraising job result. Comply with laws, rules & regulations & meet cost, productivity, accuracy and timeliness targets. Always ensure Supply Chain Security and Safety of warehouse and its staff.<br><br>Qualifications And Experience<br><br>Bachelor’s degree in business administration, Logistics or Supply Chain. Fluent - Excellent communication skills (Arabic & English) Proven working experience 8 years as a Warehouse/Logistics manager. Expertise in warehouse management procedures and best practices. Proven ability to implement process improvement initiatives. Strong knowledge of warehousing Key Performance Indicators (KPIs). Hands on experience with warehouse management software and databases (SAP ). Leadership skills and ability manage staff. Strong decision making and problem-solving skills.

We’re looking for a Senior Software Engineer, i OS to join Procore’s Mobile team. In this role, you’ll help design, build, and scale the i OS mobile applications that help construction teams manage projects and jobsite safety. Your primary goal will be to deliver complex, high-quality mobile features while contributing to the team's technical standards and helping raise the bar for the engineers around you.<br><br>As a Senior Software Engineer, i OS, you’ll partner with Engineering, Product Management, Design, and QA to build mission-critical i OS features used by construction teams around the world. Use your solid i OS architecture skills, sound judgment, and collaborative mindset to help unblock your team, work through technical challenges, and improve the quality and speed of what we ship. Join a team building software that impacts how communities, hospitals, schools, and stadiums are constructed—apply today.<br><br>This position reports into the Engineering Manager, Mobile Project Management Quality and Safety team and will be based in our Cairo, Egypt office. We’re looking for someone to join us immediately.<br><br>What you'll do:<br><br>AI is central to how we work. You’ll be expected to master generative tools and agentic workflows, moving beyond just using AI to actively building the agentic future of construction. Design and implement complex, high-impact features across our i OS applications Contribute to key architectural and design decisions for the team, in partnership with Staff engineers and the Engineering Manager Identify technical issues and improvement opportunities within your area of ownership and help drive them to resolution Mentor fellow engineers through code reviews, pairing sessions, and hands-on coaching Partner with Product, Design, and QA to translate customer needs into scalable technical solutions Help drive improvements in performance, reliability, and maintainability across the codebase Support the full lifecycle of feature delivery, including production support and incident resolution<br><br>What we're looking for:<br><br>Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent work experience5+ years of engineering experience, including 3+ years building native i OS applications with Swift and Objective-CSolid understanding of i OS architecture (Core Data, Swift UI, UIKit) and MVC/MVVM design patterns, along with working knowledge of multi-threading, concurrent programming, memory management, and performance optimization Track record of shipping complex, high-quality software products Candidate with product mindset and/or Mobile Automation background is a huge plus Experience contributing to or leading medium-scale technical initiatives, with the ability to course-correct as needed Excellent communication skills and a collaborative approach to working across teams Self-directed, with sound judgment on when to escalate versus resolve independently

Yassir is the leading super App in the Maghreb region set to changing the way daily services are provided. It currently operates in 45 cities across Algeria, Morocco and Tunisia with recent expansions into France, Canada and Sub-Saharan Africa. It is backed (:$200M in funding) by VCs from Silicon Valley, Europe and other parts of the world.<br><br>We offer on-demand services such as ride-hailing and last-mile delivery. Building on this infrastructure, we are now introducing financial services to help our users pay, save and borrow digitally.<br><br>Helping usher the continent into a digital economy era. We’re not just about serving people - we’re about creating a marketplace to bring people what they need while infusing social values.<br><br>As a full-stack developer specializing in Node.js and React, you will be an essential part of our engineering team, working on both client-side and server-side applications. Your primary focus will be to develop user interfaces and implement server-side logic, creating seamless integrations between the two. Collaborative problem-solving, sophisticated design, and a commitment to quality products are essential in our fast-paced, dynamic environment.<br><br>Design and develop web applications using Node.js and React.<br><br>Collaborate with cross-functional teams to define, design, and ship new features.<br><br>Ensure the performance, quality, and responsiveness of applications.<br><br>Work with modern tools and technologies, maintaining code quality, organization, and automation.<br><br>Identify and correct bottlenecks, fix bugs, and optimize performance.<br><br>Participate in brainstorming sessions and contribute ideas to technology, algorithms, and products.<br><br>Collaborate closely with design and engineering teams to translate end-user requirements into effective technical solutions.<br><br>Embrace and solve complex challenges, delivering results on schedule.<br><br>????‍???? You might be the right fit if:<br><br>You’re solid in React, Node.js, and Type Script, but always hungry to improve You care about clean code, architecture, and software design that lasts You don’t wait for work — you look for what matters and make it happen You think in impact, not just in tickets You love to share knowledge, listen, and help others grow You want to be part of a team that cares about excellence — technically and humanly<br><br><br>???? Tech Stack<br><br>React (hooks), Next.js, Node.js, Type Script, Postgre SQL, REST/Graph QL, Docker, CI/CDBonus: Clean Architecture, Domain-Driven Design (software architecture), SOLID principles Testing (Jest / Cypress), Redis, AWS/GCP, Java (for backend interoperability or legacy systems)<br><br><br>Why you should join Yassir<br><br>???? You will be part of one of the first Algerian startups to go through the Y Combinator program and one of the fastest-growing tech companies in North Africa. We are currently in +30 cities (Algeria, Tunisia, Morocco, Senegal, France, and Germany)???? Attractive salary, and you even get a stake in the company????????Have a lasting impact on our company's culture???? Perfect timing with renowned investors to build something great???? Extremely steep learning curve with own responsibility and intensive guidance???? Make a real impact on the world by helping us bring affordable financial and on-demand services to millions of Africans<br><br><br>At Yassir, we believe in the power of diversity and the importance of an inclusive culture. So, if you're ready to bring your unique perspective and experiences to the table, then we're excited to listen.<br><br>Don't just apply for a job, come and be a part of our journey. Let's create a better tomorrow together.<br><br>We look forward to receiving your application!<br><br>Best of luck,<br><br>Your Yassir TA Team<br><br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Do you aim to have a dynamic impact on the world?<br>Are you up for creating solutions and solving tomorrow’s problems today? Then we have the opportunity for you!<br>We are looking to hire an ICQA Area Manager to be part of our fulfillment centre Inventory Control and Quality Assurance (ICQA) team. Our fulfillment centres sit at the heart of Amazon’s rapidly growing operations network: they are where we manage our fast-moving inventory. In each fulfillment centre, our teams stow deliveries, pick products, package them up and ship them out; each of these groups have played their part in taking us where we are today.<br>These fulfillment centres are fast-paced and high reward environments, where adherence to policies and procedures is key. We need the right type of leader to ensure that we deliver as reliably as ever to our customers, while making sure our teams deliver on customer obsession.<br>Key job responsibilities<br>- Lead and supervise a team of hourly associates in Inventory Control/Quality Assurance operations within the fulfilment centre:<br>- Support safety programs and compliance to ensure a safe work environment for all associates<br>- Coordinate inventory control maintenance and random counts in accordance with network count strategies, ensuring compliance and consistency with SOX<br>- Measure quality, inventory integrity, and accuracy while providing proactive feedback to the operations management team<br>- Conduct shift planning and forecasting, alongside assigning and directing work<br>- Plan for and identify root causes of inventory deviation, via cause and effect analysis<br>- Support network-wide fulfilment &amp; operations-focused quality initiatives<br>- Review and analyse customer complaints and process defect data, followed by development of corresponding action plans to reduce future incidents<br>- Drive process improvements and develop team members’ ability to keep pace with our rapid growth, while motivating others and reducing employee turnover<br>- Appraise the performance of team members; developing, rewarding and coaching employees<br>- Experience in Business English skills, both verbal and written<br>- Experience in data analysis and reporting<br>- 3+ years of retail, operations, product or program management, or business management/consulting with negotiations and delivering results experience<br>- Bachelor's degree, or Bachelor of Arts degree<br>- Master's degree, or Master's degree in management, business administration, economics, engineering, marketing<br>- Experience using SQL databases to manage and analyze large data sets<br>- Experience with an e-commerce company<br>- Experience in lean or six sigma methodologies for operational, process, and performance improvement projects including process mapping and process re-design<br>Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.</p><br> </div>

<p>Who we are For over three decades, Juhayna Food Industries has been a pioneer in Egypt s dairy and juice sector, producing, processing, and packaging milk, yoghurt, cooking products, juices, and concentrates. Since 1983, we have built trusted household brands, expanding our presence across Egypt and the Middle East through a commitment to high-quality, safe, and healthy products. Today, with four state-of-the-art plants, a vast distribution network reaching over 136,000 outlets, and a 5,000-feddan dairy farm housing over 7,000 milking cows, Juhayna continues to set benchmarks for premium Egyptian products. Our success stems from our people, who embody the values of Integrity, Achievement, Continuous Improvement, Innovation, Ownership, and Positivity.</p><p>Job Purpose Monitor the implantation of day-to-day maintenance tasks, troubleshoot issues, and implement preventive maintenance to minimize downtime and increase productivity to achieve maintenance KPI s</p><p><b>What you will do in your role</b></p><p>Day to Day Operations</p><ul><li>Oversee day to day Implementation of maintenance activities to achieve maintenance schedules.</li><li>Organize periodical planned and preventive maintenance schedule and implement time plan for all the factory equipment s and machinery.</li><li>Supervise any installations to ensure that the application is meeting the required measurements.</li><li>Document maintenance activities, incidents, and repairs, and reporting to higher management as needed.</li><li>Focus in achieving 100% of breakdown analysis and RCA.</li><li>Reviews the total operating hours counter per machine in the beginning of each month with the department head to set the periodic maintenance plan and ensure to achieve 100% of PM adherence.</li><li>Keep track of all spare parts in the production hall and machines of the maintenance to report and issue &amp; follow up all POs in case of any shortage in the warehouse stock.</li><li>Allocate team members time shifts, assigned tasks and supervises their performance to guarantee the maximum utility of each member s skills.</li><li>Ensure that technician s commitment to wearing the uniform, maintaining their personal cleanliness and hygiene by following the procedures of Industrial Safety &amp; Security, GMP and Food Safety System (HACCP).</li><li>Develop a team of Junior maintenance engineers and technicians.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in mechanical engineering, Electrical Engineering, or a related field. From 2 to 3 experience in Maintenance Engineering. At least 1 year sold experience in Maintenance Manufacturing, preferably FMCG. Proficiency in using diagnostic tools and software for troubleshooting mechanical or Electrical issues. Strong interpersonal skills.</p>

<strong>Job Description<br><br></strong>As a Mechanical Engineer, you will play a vital role in our aftermarket Repair group. Your primary focus will be on the repair and inspection of NOV equipment, ensuring it operates at optimal levels. You will be the go-to person for equipment down situations and will support repair projects across various RFE products. Your ability to interpret engineering drawings, make necessary changes, and troubleshoot customer systems will be key to your success in this role.<br><br><strong>Responsibilities<br><br></strong><strong>DUTIES &amp; RESPONSIBILITIES</strong>:<br><br><ul><li> Service, repair, overhaul, inspect and identify faults on NOV RFE Equipment on a global basis </li><li> Make recommendations on improving product and systems efficiency, maintaining continuous and high levels of operation </li><li> Read and interpret engineering drawings/schematics to identify and correct faults, redline drawings/schematics </li><li> Collaborate with key stakeholders including Customers, Colleagues and other NOV entities </li><li> Escalate key faults or product failures to relevant department and progress through to resolution </li><li> Inspects NOV equipment for conformance with operational standards </li><li> Respond to emergency calls for equipment down situations when required </li><li> Collaborate with management, engineering, quality and HSE personnel to resolve problems with NOV equipment and recommend measures to improve the operation and condition of the equipment </li><li> Where necessary, liaise closely with other operational teams to ensure continuous improvement of all systems and processes. </li><li> Keep up to date with new legislation and maintaining a working knowledge of all HSE legislation and any developments that affect our industry </li><li> Advise customers on the maintenance and upkeep of their NOV equipment as per the various manuals, Product Information Bulletins (PIB) drawing revision changes, software updates etc. </li><li> Carry out fault finding, repair and recommendations in a timely manner without compromising safety or quality <br><br></li></ul><strong>Qualifications<br><br></strong><strong> QUALIFICATIONS <br><br></strong><ul><li> Bachelor’s degree in Mechanical Engineering. <br><br></li></ul><strong>Experience<br><br></strong><ul><li> 3-5 years of experience in a similar role <br><br></li></ul><strong>Skills, Training &amp; Specialist Knowledge<br><br></strong><ul><li> Proficiency in Microsoft Office Suite (Especially Excel) </li><li> Knowledge of Quality Management Systems and application. </li><li> Ability to interpret engineering drawings/schematics (Desirable) </li><li> Experience with ERP Systems (e.g., Oracle, Tracker) is preferred. </li><li> Oil and Gas Technical Knowledge (desirable) </li><li> Able to understand, evaluate and apply technical information and functional skills (Functional &amp; technical) </li><li> Capable of keeping abreast of an evolving portfolio of products, services and systems (Technical learning) </li><li> Has solutions and suggestions that are effective in addressing the problem at hand (Problem Solving) </li><li> Arabic, English language (intermediate)</li></ul>

<strong>Company Description</strong> DOTS for Engineering Industries is a fully API-certified oilfield machine shop, registered with the Egyptian General Petroleum Corporation (EGPC) and serving clients across the MENA region. From its head office and advanced machine shop in New Cairo, Egypt, the company manufactures and services critical oilfield equipment in full compliance with international standards. DOTS holds multiple API certifications covering wellhead and well control equipment, choke and kill lines, drilling tools, and quality management systems. In addition to core manufacturing and servicing capabilities, DOTS supplies supplementary oilfield products such as hammer unions, testing drifts, mud pump spares, and pipe fittings. The organization is focused on delivering reliable, compliant, and high-performance solutions to the oil and gas industry.<br><strong>Role Description</strong> The Junior Sales Engineer is a full-time, on-site role based in Cairo, responsible for supporting sales activities for oilfield equipment and related services. This role includes assisting in the preparation of technical and commercial proposals, responding to customer inquiries, and coordinating with the engineering and production teams to ensure accurate specifications and delivery timelines. The Junior Sales Engineer will participate in client meetings, gather and analyze customer requirements, and help maintain strong relationships with existing and prospective clients in the MENA region. Daily tasks also involve updating sales reports and CRM records, supporting tender submissions, and staying current on company products, certifications, and industry standards.<br><strong>Qualifications<br></strong> <ul><li>Technical knowledge of mechanical or petroleum engineering fundamentals, with the ability to understand oilfield equipment, API standards, and basic machining processes.</li><li>Sales and customer-facing skills, including relationship building, negotiation support, and clear presentation of technical solutions to non-technical stakeholders.</li><li>Strong communication and documentation abilities, with proficiency in drafting proposals, writing emails, and preparing sales reports in English; Arabic proficiency is an advantage.</li><li>Analytical and organizational skills, including attention to detail, basic data analysis, and effective time management in a fast-paced environment.</li><li>Bachelor’s degree in Engineering (Mechanical, Petroleum, or related field) or an equivalent technical discipline.</li><li>Proficiency with MS Office and common business productivity tools; familiarity with CRM systems is beneficial.</li><li>Ability to work collaboratively with cross-functional teams on-site and to learn quickly in a technical, standards-driven environment.</li><li>Prior internship or entry-level experience in sales engineering, oilfield services, or industrial equipment is a plus.</li></ul>

<br><br><p><strong>1.&nbsp;Model Authoring & Parametric Development</strong></p><ul><li><p>Develop and maintain Mechanical BIM models in Autodesk Revit in accordance with project requirements, BIM standards, BEP, and required LOD.</p></li><li><p>Develop and manage parametric families, model elements, and associated information in line with project standards.</p></li><li><p>Apply Mechanical construction knowledge to support accurate and technically coordinated model development.</p></li><li><p>Maintain organized and up-to-date WIP models for coordination and review.</p></li></ul><br><p><strong>2. Drawing Extraction & Construction Detailing</strong></p><ul><li><p>Extract and produce accurate GFC drawings from coordinated BIM models.</p></li><li><p>Prepare and maintain Revit documentation, including dimensions, annotations, details, schedules, and related information.</p></li><li><p>Incorporate approved design changes, RFIs, technical comments, and coordination updates into drawings.</p></li><li><p>Ensure GFC drawings comply with project requirements, specifications, standards, and approved typical details.</p></li><li><p>Deliver drawing packages within the required submission deadlines.</p></li></ul><br><p><strong>3. Model Maintenance & Quality Assurance</strong></p><ul><li><p>Maintain BIM models and associated information throughout the project lifecycle.</p></li><li><p>Perform quality checks on models, drawings, and documentation to identify and resolve errors or inconsistencies.</p></li><li><p>Ensure model development, information, and documentation comply with the required LOD and project standards.</p></li><li><p>Verify the accuracy and quality of GFC drawings and model deliverables prior to submission and approval.</p></li><li><p>Sizing of ducts / pipe / air Terminals, Preparation of Builders works ,</p></li><li><p>identifying Design discrepancies and raising concerns to the TE</p></li><li><p>Knowledge on construction methodology to ensure the developed mode is good enough to construct</p></li><li><p>Selection of breakers / controls based on the material submittal</p></li></ul><br><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in&nbsp;<strong>Electrical Engineering</strong>.</p></li><li><p>Minimum of&nbsp;<strong>6+ years of relevant experience in the construction industry</strong>.</p></li><li><p>Previous experience working with&nbsp;<strong>construction or contracting companies is mandatory</strong>.</p></li><li><p>Relevant experience in&nbsp;<strong>electrical design and drafting</strong>.</p></li><li><p>Proven experience as an&nbsp;<strong>Electrical BIM Modeler or Revit Electrical Modeler</strong>&nbsp;on construction projects.</p></li></ul><p>Technical Requirements</p><ul><li><p>Strong proficiency in&nbsp;<strong>Autodesk Revit</strong>&nbsp;for electrical BIM modeling and construction documentation.</p></li><li><p>Strong understanding of&nbsp;<strong>electrical construction technology, construction methodologies, site execution, and materials</strong>.</p></li><li><p>Good working knowledge of&nbsp;<strong>Autodesk Navisworks and AutoCAD</strong>.</p></li><li><p>Ability to read, interpret, and understand&nbsp;<strong>electrical design and construction drawings</strong>.</p></li><li><p>Experience working with&nbsp;<strong>coordinated BIM models</strong>&nbsp;within contractor or construction environments.</p></li><li><p>Experience using&nbsp;<strong>BIM 360 / Autodesk Construction Cloud (ACC)</strong>.</p></li><li><p>Strong understanding of&nbsp;<strong>BIM coordination and clash detection</strong>.</p></li><li><p>UAE/GCC construction experience will be an advantage.</p></li></ul><p>Software Skills</p><p><strong>Autodesk Revit | Autodesk Navisworks | Autodesk Construction Cloud (ACC) | AutoCAD</strong></p>

<strong>Description<br><br></strong>The Facilities Supervisor – Maintenance will have a significant impact on customer experience. The Facilities Supervisor – Maintenance will have the ability to lead other technicians, design solutions for challenging problems, manage outside contractors, be on call for emergencies, to handle multiple projects and daily activities, and meet time lines. The Facilities Supervisor – Maintenance will develop plans on how to accomplish engineering departmental goals.<br><br>Key job responsibilities<br><br>The Facilities Supervisor – Maintenance will be responsible for the leadership/development and coaching of the team. Performance Management will be carried out by the Facilities Supervisor – Maintenance. This role also leads the technical team in providing both a reactive and pro-active maintenance service on all operational equipment and facilities infrastructure within the AMZL Distributions Centers. The role has a direct impact on the site, its productivity and operational success. If equipment is not available or performs badly it minimizes the capacity and throughput of the site.<br><br><strong>Responsibilities Will Include<br><br></strong><ul><li> To provide supervision and leadership to Maintenance Technicians</li><li> To develop and deliver Preventive Maintenance programs</li><li> To be experienced in installing, maintaining, and troubleshooting any of the following: relay logic, ladder diagrams, controls components, sensors &amp; scanners, motor starters, relays, limit switches, electronic sensors, servo drives, frequency inverters, linear drives, sorters, mechanical components (rolls, bearing, belts)</li><li> To act as an ambassador for safety within the team and to promote safe working across the site</li><li> To support technicians by motivating, providing knowledge and hands on experience</li><li> To develop and maintain a good working relationship across all levels in the organization</li><li> Ability to provide enriched feedback to enhance individual performance</li><li> Ability to prioritize and manage resources under high pressure<br><br></li></ul><strong>Basic Qualifications<br><br></strong><ul><li> Experience in Electrical/Mechanical/Electronics and Communication/Instrumentation and Controls<br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li> Experience with programming/scripting (Batch, VB, PowerShell, Java, C#, Chef, Perl, Ruby and/or PHP), or experience in Redshift and experience managing full application stacks from the OS up through custom applications<br><br></li></ul>Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.<br><br><br><strong>Company</strong> - Souq.com for E-Commerce LLC<br><br>Job ID: A10440957

<p>JOB PURPOSE: Operate and support all civil and fire protection daily maintenance activities along with facilities management in LRT stations and buildings to enhance smooth operations and ensure maintenance reliability.</p><p>Profile RESPONSIBILITIES/DUTIES</p><p>Operational Support &amp; Maintenance Execution</p><ul><li>Assist Facility Management Engineers with daily work activities to enhance efficiency and reliability of LRT buildings and stations maintenance.</li><li>Operate according to business needs and roster planning.</li><li>Diagnose reported faults and execute maintenance and repair action plans under the guidance of Facility Management Engineers.</li><li>Perform technical tasks including painting, plumbing, gypsum works, metal works, concrete and masonry repairs, fire protection tasks, tiling, and monitoring housekeeping activities.</li></ul><p>2. Monitoring &amp; Quality Assurance</p><ul><li>Monitor and report the performance of fire protection subcontractors to ensure tasks are completed properly.</li><li>Apply proper checklist regulations to ensure equipment availability and reliability during maintenance activities.</li><li>Monitor and ensure the implementation of housekeeping activities in LRT Bader Depot as required.</li></ul><p>3. Resource Management</p><ul><li>Optimize maintenance processes through proper utilization of tools and spare parts.</li><li>Ensure the availability of tools and spare parts in the warehouse and report any shortages promptly.</li></ul><p>Reporting &amp; Documentation</p><ul><li>Prepare statistical maintenance reports on a regular basis (daily, weekly, monthly).</li></ul><p>Compliance &amp; Safety</p><ul><li>Ensure full compliance with health and safety regulations, following safety rules and permits as instructed.</li></ul><p>ESSENTIAL QUALIFICATIONS, KNOWLEDGE &amp; EXPERIENCE</p><p>QUALIFICATIONS:</p><p>Vocational Diploma/ or a suitable relevant degree.</p><p>KNOWLEDGE:</p><p>Good acknowledgement in Civil and Facilities repairing works as assigned.</p><p>EXPERIENCE:</p><p>3 to 5 years experience in (civil, mechanical, electrical) maintenance works.</p><p>Metro and/or train stations and depot civil construction experience is a plus.</p><p>DESIRED BEHAVIORS &amp; EXPERIENCES</p><ul><li>Good listener.</li><li>Team Player.</li><li>Ability to communicate with staff of all levels.</li><li>Possess analytical and critical ability.</li><li>Think out of the box to identify non-conventional solutions for work activities.</li><li>Possess self-drive and enthusiasm.</li><li>Problem solving ability.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>QUALIFICATIONS: Vocational Diploma/ or a suitable relevant degree.</p><p>KNOWLEDGE: Good acknowledgement in Civil and Facilities repairing works as assigned.</p><p>EXPERIENCE: 3 to 5 years experience in (civil, mechanical, electrical) maintenance works. Metro and/or train stations and depot civil construction experience is a plus.</p><p>DESIRED BEHAVIORS &amp; EXPERIENCES</p><ul><li>Good listener.</li><li>Team Player.</li><li>Ability to communicate with staff of all levels.</li><li>Possess analytical and critical ability.</li><li>Think out of the box to identify non-conventional solutions for work activities.</li><li>Possess self-drive and enthusiasm.</li><li>Problem solving ability.</li></ul>

<p>Hanwha Aerospace is hiring a Quality Engineer to join our manufacturing operations in Cairo.</p><p></p><p>This opportunity is well suited to a quality professional with 3–5 years of manufacturing experience who wants to move beyond routine inspection and take ownership of production quality, problem solving and quality-system implementation. You will work closely with production and engineering teams and help establish reliable local quality practices as operations grow.</p><p></p><p><strong>In this role, you will:</strong></p><p>• Verify product and process conformity against approved drawings, work instructions and inspection criteria.</p><p>• Support quality activities across machining, welding, assembly and product-inspection processes.</p><p>• Create and maintain nonconformity reports, evidence and disposition records.</p><p>• Coordinate root-cause analysis, corrective actions and recurrence-prevention activities, and follow actions through closure.</p><p>• Review manufacturing and quality documents and compare documented requirements with actual products and shop-floor processes.</p><p>• Apply QMS procedures in daily production and identify gaps in inspection criteria or work instructions.</p><p>• Maintain accurate quality records and report recurring issues, open actions and improvement progress.</p><p>• Work with production, engineering and design teams to resolve quality issues using clear evidence and approved procedures.</p><p>• Share quality requirements with local employees and international support personnel.</p><p></p><p><strong>What you can expect:</strong></p><p>• Broader responsibility across production quality, corrective action and QMS implementation.</p><p>• Practical exposure to several manufacturing processes rather than a single inspection activity.</p><p>• Close collaboration with experienced engineering and production specialists.</p><p>• An opportunity to become a trusted local quality professional as operations develop.</p><p><strong>Requirements</strong></p><p>• Bachelor’s degree in Mechanical Engineering, Electrical Engineering or a closely related engineering discipline.</p><p>• 3–5 years of QA/QC or production-quality experience in mechanical, electrical or industrial manufacturing.</p><p>• Ability to read 2D drawings, English work instructions and inspection criteria and compare them with actual products and processes.</p><p>• Practical understanding of nonconformity management, root-cause analysis, corrective action and recurrence prevention.</p><p>• Ability to maintain clear quality records and prepare reports using MS Office.</p><p>• Proactive shop-floor approach and the ability to coordinate issues with production, engineering and design teams.</p><p>• Working English communication skills for technical documents and collaboration with international specialists.</p><p>• Ability to communicate quality requirements clearly to local production personnel in Arabic.</p><p>• Willingness to work on-site in Cairo and support approved weekend or overtime work when production requires it, in accordance with Egyptian law and company procedures.</p><p></p><p>Experience in machining, welding, assembly or product inspection and familiarity with QMS documents and procedures are strongly preferred.</p><p></p>

<p>Monitor, implement, and coordinate daily technical service operations across all facility systems Execute and oversee the operation and maintenance of mechanical, electrical, automation, and infrastructure systems within the building Coordinate engineering department activities and supervise maintenance teams to ensure efficient workflow and quality standards Perform scheduled and preventive maintenance checks, identify system faults, and ensure timely completion of repairs Monitor and manage the Building Management System (BMS), adjusting settings according to seasonal conditions and Chief Engineer directives Coordinate and supervise work performed by external contractors, ensuring compliance with organizational standards and project specifications Oversee renovation and technical project works from planning through completion Conduct periodic testing, maintenance, and inspections of fire alarm, safety, and firefighting systems to ensure continuous operational readiness Execute comprehensive maintenance and inspections of guest areas, rooms, and all mechanical, plumbing, and electrical systems Track and manage work orders through technical software systems (such as Maximo and BMS), resolve deficiencies, and prepare detailed reports Identify material requirements, manage inventory levels, and place necessary orders in a timely manner Continuously improve maintenance programs, update system records with new equipment data, and implement innovative solutions Respond promptly to emergency situations and technical issues, demonstrating resilience and decisive problem-solving Maintain transparent communication with the Chief Engineer, team members, and external stakeholders regarding project status and technical matters</p><p><strong>Desired Candidate Profile</strong></p><h3>Qualifications</h3><ul><li>Bachelor's degree in Mechanics Engineering, Mechanics Engineering, or related field</li><li>Minimum 3-5 years of professional experience in hotel engineering, facilities management, or construction works</li><li>Strong technical knowledge of high-standard building systems, equipment, and infrastructure</li><li>Demonstrated proficiency with Building Management Systems (BMS) and technical software platforms (e.g., Maximo)</li><li>Proven leadership and team management skills with the ability to supervise and motivate maintenance teams</li><li>Excellent problem-solving and analytical abilities with strong attention to detail</li><li>Solid organizational and time management skills with the ability to prioritize multiple tasks effectively</li><li>Proven ability to work under pressure and manage emergency situations with composure and efficiency</li><li>Strong written and verbal communication skills in English; additional languages are a plus</li><li>Knowledge of fire safety systems, electrical systems, and preventive maintenance best practices</li><li>Experience coordinating with external contractors and vendors</li><li>Familiarity with budget awareness and cost management principles</li><li>Commitment to safety compliance and adherence to industry standards</li><li>Ability to work collaboratively in a team environment and support colleagues with an inclusive and empathetic approach</li></ul>

<h2>Job Summary</h2><p>Auto Truck Co. is looking for a <strong>Production Engineer – Assembly Line</strong> to supervise and improve assembly operations for truck and trailer spare parts.</p><p>The role focuses on the assembly of <strong>plastic parts, mirrors, lighting products, body parts, electrical components, and truck accessories</strong>.</p><p>The ideal candidate should have strong hands-on experience in assembly-line production, line balancing, quality follow-up, and managing operators and technicians.</p><h2>Key Responsibilities</h2><ul><li><p>Supervise daily assembly-line activities.</p></li><li><p>Follow up production plans and daily production targets.</p></li><li><p>Supervise assembly of:</p><ul><li><p>Mirrors</p></li><li><p>Lighting products</p></li><li><p>Plastic body parts</p></li><li><p>Mudguards</p></li><li><p>Grilles</p></li><li><p>Side steps</p></li><li><p>Plastic housings</p></li><li><p>Electrical components</p></li><li><p>Truck accessories</p></li></ul></li><li><p>Supervise assembly operations including:</p><ul><li><p>Drilling</p></li><li><p>Cutting</p></li><li><p>Trimming</p></li><li><p>Gluing</p></li><li><p>Bonding</p></li><li><p>Screwing</p></li><li><p>Riveting</p></li><li><p>Clip assembly</p></li><li><p>Wiring</p></li><li><p>Socket installation</p></li><li><p>Glass fitting</p></li><li><p>Rubber and seal installation</p></li><li><p>Final fitment</p></li><li><p>Finishing</p></li></ul></li><li><p>Ensure correct use of jigs, fixtures, templates, and assembly tools.</p></li><li><p>Monitor fitment, alignment, dimensions, appearance, and functionality.</p></li><li><p>Prevent scratches, deformation, incorrect assembly, and cosmetic defects.</p></li><li><p>Coordinate with Quality Control regarding assembly defects.</p></li><li><p>Coordinate with Injection Molding when plastic parts have dimensional or fitment problems.</p></li><li><p>Balance manpower between assembly stations.</p></li><li><p>Improve line cycle time and productivity.</p></li><li><p>Reduce rework, scrap, and assembly errors.</p></li><li><p>Develop and follow standard work instructions.</p></li><li><p>Train operators and technicians on correct assembly methods.</p></li><li><p>Follow up final assembly before packaging.</p></li><li><p>Monitor production output, rejection, rework, and downtime.</p></li><li><p>Prepare daily and weekly production reports.</p></li><li><p>Support continuous improvement activities.</p></li></ul><p></p><p><strong>Requirements</strong></p><p></p><h2>Job Requirements</h2><ul><li><p>Bachelor's degree in <strong>Mechanical Engineering, Production Engineering, Manufacturing Engineering</strong>, or a related field.</p></li><li><p><strong>2–5 years of experience</strong> in production or assembly operations.</p></li><li><p>Strong practical experience on assembly lines.</p></li><li><p>Good understanding of plastic parts and injection-molded components.</p></li><li><p>Good understanding of mechanical and electrical assembly.</p></li><li><p>Ability to read drawings and specifications.</p></li><li><p>Experience with jigs, fixtures, and measuring tools.</p></li><li><p>Strong problem-solving skills.</p></li><li><p>Ability to manage operators and technicians.</p></li><li><p>Good communication and reporting skills.</p></li></ul><h2>Required Skills</h2><ul><li><p>Assembly Line Production</p></li><li><p>Plastic Parts Assembly</p></li><li><p>Automotive Assembly</p></li><li><p>Injection-Molded Parts</p></li><li><p>Mirror Assembly</p></li><li><p>Lighting Assembly</p></li><li><p>Body Parts Assembly</p></li><li><p>Electrical Assembly</p></li><li><p>Wiring &amp; Socket Installation</p></li><li><p>Drilling &amp; Trimming</p></li><li><p>Gluing &amp; Bonding</p></li><li><p>Riveting &amp; Fastening</p></li><li><p>Jigs &amp; Fixtures</p></li><li><p>Fitment &amp; Alignment</p></li><li><p>Production Planning</p></li><li><p>Line Balancing</p></li><li><p>Cycle Time Improvement</p></li><li><p>Root Cause Analysis</p></li><li><p>Rework Reduction</p></li><li><p>Scrap Reduction</p></li><li><p>Quality Follow-Up</p></li><li><p>Process Improvement</p></li><li><p>Team Leadership</p></li><li><p>Production Reporting</p></li></ul><h2>Preferred Experience</h2><p>Experience in any of the following is highly preferred:</p><ul><li><p>Automotive parts</p></li><li><p>Truck spare parts</p></li><li><p>Plastic automotive components</p></li><li><p>Mirrors</p></li><li><p>Lighting products</p></li><li><p>Electrical assemblies</p></li><li><p>Injection molding</p></li><li><p>Plastic body parts</p></li><li><p>High-volume assembly lines</p></li></ul><p></p>

<p>The Junior / Senior Systems Engineer supports the development, modeling, characterization, calibration, and validation of sensor systems and spectral sensing products. The role contributes to translating product requirements into system specifications, validating system performance, and supporting product development activities across the entire lifecycle from concept through production readiness. The position works closely with multidisciplinary teams including MEMS, Optics, Electronics, Software, and Mechanical Engineering to ensure successful delivery of sensor solutions.</p><p>Key Responsibilities :</p><ul><li>Contribute to the development, design, modeling, and simulation of sensor systems and spectral sensing products.</li><li>Support the definition and allocation of system requirements and specifications to achieve target product performance.</li><li>Participate in system architecture studies, performance analysis, and trade-off evaluations.</li><li>Support system characterization activities and develop validation methodologies, test procedures, and performance assessments.</li><li>Contribute to the development and implementation of product calibration approaches, algorithms, and associated test setups.</li><li>Perform laboratory experiments, testing, characterization, data collection, and technical investigations to evaluate system performance.</li><li>Support failure analysis, root cause investigations, and corrective actions related to system performance issues.</li><li>Collaborate closely with MEMS, Optics, Electronics, Software, Mechanical, and Manufacturing teams throughout product development and industrialization phases.</li><li>Support yield analysis and continuous improvement activities to enhance product performance, manufacturability, and reliability.</li><li>Prepare technical reports, characterization results, validation documentation, and engineering records.</li><li>Communicate technical progress, findings, risks, and recommendations to project teams and engineering leadership.</li><li>Support customer technical inquiries and application-related investigations in collaboration with Marketing and Product Management teams.</li><li>Contribute to the preparation of datasheets, application notes, technical documentation, and product specifications.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Physics, Mechatronics Engineering, Systems Engineering, or a related technical discipline.</li><li>0 - 2 years for the Systems Engineer role; 2 - 5 years for the Senior Systems Engineer role in systems engineering, sensor technologies, semiconductor products, spectroscopy, optics, or electronics.</li><li>Strong understanding of electronic and optical systems, integrated optics, MEMS technologies, signal processing, and system integration principles.</li><li>Experience (or familiarity for entry-level) in system modeling, simulation, characterization, calibration, and validation activities.</li><li>Proficiency in MATLAB, Python, Octave, or equivalent technical computing tools.</li><li>Hands-on experience with laboratory instrumentation, measurement systems, automated test setups, and engineering experimentation.</li><li>Knowledge of DSP algorithms, spectroscopy, chemometrics, or data analytics techniques.</li><li>Strong analytical, troubleshooting, and root-cause investigation capabilities, paired with excellent technical communication and cross-functional reporting skills.</li></ul>

<p> </p><br><ul> </ul> <p> </p> <p> <b>What you will bring</b> </p> <p> </p> <p>A desire to drive your future and accelerate your career and the following experience and knowledge:</p> <ul> <li>CI and high-performance work systems experience</li> <li>Strong facilitation and communication skills to support team discussions on CI activities</li> <li>Application of lean and/or TPM tools in a factory or operations environment</li> <li>Ability to manipulate and validate data in manual and automated systems</li> <li>Mastery of Excel and other data analytics tools</li> <li>Organized and disciplined to support and educate on the DMS process</li> <li>Logical and structured thinking to extract insights from data</li> </ul> <p> </p> <p> </p> <p> <b> <u>More about this role</u> </b> </p> <p> </p> <p> <b>What you need to know about this position:</b> </p> <p>The IL6S Engineer is responsible for optimizing manufacturing processes to maximize performance, eliminate losses, improve capability, and ensure process stability through Identification, Eradication, &amp; Prevention. You will act as a technical problem solver, data-driven analyst, and change agent to ensure sustainable process performance and capability building at front line.</p> <p> </p> <p> <b>What extra ingredients you will bring:</b> </p> <p> Loss Identification</p> <ul> <li>Identity and understanding sporadic losses within front line leaders. </li> <li>Accountable for chronic losses identification through weekly, monthly and quarterly exercise</li> </ul> <p> <br>Loss Eradication</p> <ul> <li>Drive and teach structured basic problem-solving for sporadic losses.</li> <li>Accountable for structured advance problem-solving for chronical losses.</li> <li>Lead, train and collaborate in Focused Improvement initiatives for productivity commitments</li> <li>Support breakdown analysis with technical expertise PM</li> </ul> <p> </p> <p>Loss Prevention</p> <ul> <li>Standardize best operating conditions thru develop Standard Operating Procedures (SOPs).</li> <li>Implement visual management and control plans.</li> <li>Ensure sustainment through audits and governance.</li> </ul> <p> <br>IL6S Pillar Integration and Capability Building</p> <ul> <li>Partner with Autonomous Maintenance (AM) to define process control points.</li> <li>Support Planned Maintenance (PM) with technical input.</li> <li>Train operators and supervisors on process fundamentals, Coach teams in structured problem-solving.</li> <li>Develop technical documentation and training materials.</li> </ul> <p> </p> <p> <b>Education / Certifications:</b> </p> <p> Bachelor's degree in mechanical/electrical engineering (Preferably Production/Industrial)</p> <p> </p> <p> <b>Job specific requirements:</b> </p> <ul> <li>Bachelor s degree in: Mechanical Engineering Electrical Engineering (Preferred: Production / Industrial Engineering)</li> <li>0-1 years of experience in a manufacturing or production environment.</li> <li>Good knowledge or hands-on exposure to: Lean / TPM / Continuous Improvement tools (e.g., 5S, RCA, Kaizen, CIL, CL, AM/PM)</li> <li>Strong skills in: Microsoft Excel, PowerPoint, Power Bi</li> <li>Interest in digitalization and process improvement</li> <li>Strong problem-solving and analytical thinking</li> <li>Good communication skills and ability to work effectively on the shop floor</li> <li>Eager to learn, proactive, and self-driven</li> </ul> <p> </p> <p><br></p>

<ul><li><p>Manage and supervise the daily operation and maintenance activities at the site.</p></li><li><p>Operate, monitor, and maintain central air conditioning and HVAC systems.</p></li><li><p>Ensure the proper and continuous operation of all HVAC equipment and systems.</p></li><li><p>Execute and follow up on preventive and corrective maintenance activities.</p></li><li><p>Inspect HVAC equipment regularly and identify potential faults and operational issues.</p></li><li><p>Troubleshoot and diagnose mechanical and operational problems and ensure timely corrective actions.</p></li><li><p>Follow up on the operation and performance of chillers, AHUs, FCUs, pumps, cooling towers, ventilation systems, and related equipment.</p></li><li><p>Supervise maintenance technicians and distribute daily tasks according to the maintenance plan.</p></li><li><p>Follow up on technicians’ performance and ensure that maintenance activities are properly executed.</p></li><li><p>Respond to emergency breakdowns and coordinate the required corrective maintenance.</p></li><li><p>Prepare and implement preventive maintenance schedules.</p></li><li><p>Follow up on daily maintenance activities and ensure that all work is completed within the required time.</p></li><li><p>Inspect equipment condition and identify spare parts and maintenance requirements.</p></li><li><p>Coordinate with the client, site management, contractors, and other departments when required.</p></li><li><p>Prepare daily, weekly, and monthly maintenance reports.</p></li><li><p>Maintain records of breakdowns, preventive maintenance, corrective maintenance, and equipment performance.</p></li><li><p>Monitor equipment efficiency and recommend solutions to improve reliability and reduce downtime.</p></li><li><p>Follow up on recurring faults and implement preventive actions to minimize breakdowns.</p></li><li><p>Ensure compliance with safety procedures and company policies at the site.</p></li><li><p>Ensure that all maintenance activities are carried out according to approved procedures and technical standards.</p></li><li><p>Follow up on contractors and specialized maintenance teams when required.</p></li><li><p>Participate in testing, commissioning, and troubleshooting activities related to HVAC systems.</p></li><li><p>Ensure proper housekeeping and safe working conditions within maintenance areas.</p></li><li><p>Report any major technical problems, equipment failures, or required replacements to the management.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s Degree in Mechanical Engineering.</p></li><li><p><strong>3–5 years of experience</strong> in site maintenance and operation.</p></li><li><p>Strong practical experience in <strong>central air conditioning and HVAC systems</strong>.</p></li><li><p>Experience in operating and maintaining chillers and related HVAC equipment.</p></li><li><p>Good knowledge of preventive and corrective maintenance.</p></li><li><p>Strong troubleshooting and problem-solving skills.</p></li><li><p>Previous experience supervising maintenance technicians is preferred.</p></li><li><p>Good communication, leadership, and coordination skills.</p></li><li><p>Ability to work under pressure and handle emergency breakdowns.</p></li><li><p>Good knowledge of occupational health and safety procedures.</p></li><li><p>Good reporting and documentation skills.</p></li><li><p>Ability to work independently and take responsibility for site operations and maintenance.</p></li><li><p><strong>Must be a resident of Ismailia or currently living in Ismailia.</strong></p></li></ul><p></p>

<p>We are looking for a detail-oriented service manager to manage our service department and handle customer service interactions, reports, and repairs. The service manager's responsibilities include providing the highest level of customer service, developing lasting customer relationships, and managing the service team members. The service manager maintains a strong working knowledge of all industry standards and practices as well as the company's products and services.</p><p>To be successful as a service manager, you should display a strong sales-minded attitude as well as excellent leadership skills. You should also have the ability to develop and maintain strong, positive relationships with customers and third-party vendors.</p><ul><li><p>Delegating and directing service tasks, monitoring the progress of current projects, and managing service team members to ensure the team's objectives and sales goals are met.</p></li><li><p>Handling customer complaints or concerns quickly and professionally to maintain good customer relationships and ensure repeat customers.</p></li><li><p>Assisting with or performing administrative tasks, such as managing and updating invoices, processing new orders, and tracking inventory.</p></li><li><p>Setting up and maintaining a service desk and evaluating its efficiency.</p></li><li><p>Resolving service desk problems and improving service methods to increase the service desk's productivity and customer service.</p></li><li><p>Monitoring department issues and client complaints to create methods to lessen recurring issues.</p></li><li><p>Auditing work and customer service to ensure the company's high standards, efficiency, and productivity goals are met.</p></li><li><p>Maintaining strong relationships with manufacturers, dealers, and sales representatives.</p></li><li><p>Helping to train new employees in company procedures.</p></li><li><p>Maintaining a strong working knowledge of industry regulations, restrictions, and laws, ensuring the company's adherence to these regulations, and remaining current on the industry's standards and new innovations, materials, tools, and processes.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering, Electrical Engineering or a related field.</p></li><li><p>10+ years of experience as a service engineer, field service technician or similar role in technical support and maintenance.</p></li><li><p>Strong technical skills and knowledge of mechanical, electrical or electronic systems and components.</p></li><li><p>Knowledge of safety protocols and standards for working with machinery and equipment.</p></li><li><p>Excellent problem-solving and diagnostic abilities, with the ability to analyse and resolve technical issues efficiently.</p></li><li><p>Customer-focused attitude with strong communication and interpersonal skills.</p></li><li><p>Ability to work independently and as part of a team in a fast-paced and dynamic environment.</p></li><li><p>Willingness to travel to customer sites as needed and work flexible hours, including evenings and weekends.</p></li></ul><p></p>

<ul><li><p>Develop and execute annual and preventive maintenance programs for plastic injection machines to ensure optimal performance and minimize unplanned downtime.</p></li><li><p>Schedule maintenance activities in coordination with production plans.</p></li><li><p>Maintain accurate maintenance records and history logs.</p></li><li><p>Diagnose and repair mechanical and hydraulic faults in injection molding machines and related equipment efficiently.</p></li><li><p>Ensure rapid response to breakdowns to reduce production interruptions.</p></li><li><p>Perform root cause analysis and implement corrective actions.</p></li><li><p>Coordinate maintenance activities with production and factory management to avoid or minimize downtime.</p></li><li><p>Provide technical support during production issues related to machinery performance.</p></li><li><p>Monitor and ensure efficient operation of chillers and cooling systems, preventing leaks, inefficiencies, and failures.</p></li><li><p>Conduct routine inspections and ensure proper system performance aligned with production requirements.</p></li><li><p>Evaluate equipment condition and performance.</p></li><li><p>Provide technical recommendations for repair, replacement, or upgrading of machinery and components.</p></li><li><p>Support continuous improvement initiatives to enhance equipment reliability and efficiency.</p></li><li><p>Support digital transformation initiatives, including maintenance systems (CMMS), automation, and smart monitoring tools.</p></li><li><p>Participate in equipment upgrades and energy optimization projects to improve operational efficiency and reduce costs.</p></li><li><p>Monitor maintenance expenses and ensure adherence to the approved maintenance budget.</p></li><li><p>Identify cost-saving opportunities without compromising equipment performance or safety.</p></li><li><p>Ensure full compliance with occupational health and safety standards during all maintenance activities.</p></li><li><p>Promote safe working practices and participate in safety audits and risk assessments.</p></li><li><p>Prepare periodic maintenance reports, including KPIs (downtime, MTBF, MTTR, etc.).</p></li><li><p>Provide data-driven insights to support management decision-making.</p></li><li><p>Handle internal operational issues related to maintenance.</p></li><li><p>Support continuous improvement initiatives (CI) such as Lean, TPM, and efficiency optimization.</p></li></ul><p></p><p><strong>Requirements</strong></p><h2><strong>Educational Background</strong>: Bachelor’s degree in mechanical engineering or equivalent.</h2><p><strong>Experience</strong>: <strong>1- 3 years of experience</strong> in maintenance within plastic injection or manufacturing environments.</p><h2>Ø&nbsp; <strong>Technical Skills</strong></h2><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Strong knowledge of plastic injection &amp; blowing machines hydraulics, pneumatics, composers&nbsp; and cooling systems</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience with preventive and predictive maintenance systems ( TPM preferred).</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Good understanding of industrial safety standards.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Strong knowledge of Microsoft office &amp; SAP system.</p><p>&nbsp;</p><h2>Ø&nbsp; <strong>Soft Skills</strong></h2><ul><li><p>Strong communication and interpersonal skills.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Ability to work effectively within a team.</p></li><li><p>Attention to detail.</p></li><li><p>Ability to work under pressure and manage multiple priorities.</p></li></ul><p></p>