Ship Mechanic Jobs

Overseeing and handling warranty claims in a way that guarantee introducing best service level, maintain and improve customer satisfaction level and raise customer loyalty and preserve company’s rights, Maintain spare parts level at preidentified quantities and quality levels.<br>Responsibilities• Monitor warranty budget and expenditures.• Review, investigate and approve warranty claims cases based on pre-identified policies and on timely basis. • Monitor, review and solve customer complains. • Review, investigate and handle cases related to customer protection agency till closed. • Train service, call center, sales, all stakeholder personnel on warranty policies and procedures, existing and new products. • Confer with suppliers by preparing, communicating and follow-up warranty claims and until product/spare parts replaced or value reimbursed. • Confer with logistics team and customs clearance to obtain and satisfy spare parts ordering requirements.• Monitor main warehouse/branches/3rd party spare parts stock and reordering. • Forecasting spare parts volume requirements based on sales/service plans. <br>Qualifications Education: • A minimum of Bachelor of engineering majored in electric/mechanics/electronics, post graduate education is preferred. Experience: • Up to 4 years’ experience in similar position. • Experience in appliances industry.

Petro Marine Offshore Projects Support Co. is seeking an experienced Marine Technical Superintendent to take full shore-based responsibility for the maintenance, reliability, technical performance, cost control and regulatory compliance of our offshore support vessel fleet, including AHTS and DP-1/DP-2 vessels.<br>This is a full-time, on-site position based at our New Cairo office. The successful candidate must be available for regular and urgent travel to vessels, shipyards and ports throughout Egypt.<br>Key responsibilities• Manage the technical condition, reliability and availability of assigned offshore vessels.• Plan and control preventive and corrective maintenance.• Maintain a prioritized defect register and ensure timely close-out of critical defects and overdue maintenance.• Lead dry-docking, major repairs, class surveys and technical projects from specification and tendering through execution, trials and final close-out.• Prepare and control annual maintenance, repair, spare-parts and dry-docking budgets; monitor committed and actual expenditure.• Provide technical troubleshooting support to Masters and Chief Engineers and lead root-cause analysis of significant failures.• Ensure compliance with class, flag, statutory, client and company requirements.• Manage DP technical assurance, including FMEA status, annual DP trials, DP defect close-out, critical equipment, configuration control and applicable IMCA guidance.• Review technical reports, vessel performance, machinery trends, fuel/lubricant consumption and recurring failures.• Coordinate OEMs, shipyards, workshops, service engineers and equipment suppliers; perform technical and commercial bid evaluations.• Maintain accurate technical records, drawings, certificates, repair history and weekly management reports.• Support technical audits, inspections, mobilizations and incident investigations.<br>Essential qualifications and experience• Marine Engineering degree and/or valid Chief Engineer Certificate of Competency (STCW III/2 or equivalent).• At least 5 years of relevant shore-based experience as a Technical Superintendent, Fleet Technical Manager or Port Engineer responsible for offshore vessels.• Proven responsibility for AHTS and/or OSV vessels, including DP-1 or DP-2 vessels.• Demonstrable experience personally managing dry-dockings, major repairs, maintenance budgets, class surveys and vessel technical inspections.• Working knowledge of DP FMEA, annual DP trials, DP defect management and relevant IMCA guidance.• Strong knowledge of diesel engines, propulsion systems, thrusters, generators, electrical/automation systems and marine auxiliary machinery.• Practical experience with PMS/ERP systems, Microsoft Office, budgeting and structured technical reporting.• Strong troubleshooting, planning, leadership, vendor-management and decision-making skills.• Professional spoken and written Arabic and English.• Willing and able to work full-time from New Cairo and travel at short notice to vessels and ports across Egypt.<br>Preferred• Previous Chief Engineer or senior engineering service on AHTS/OSV/DP vessels.• Experience with Egyptian marine workshops, shipyards, OEM representatives and service providers.• Experience with offshore-client technical audits, OVID/e CMID or comparable assurance regimes.<br>Important application requirement Applicants should ensure that their CV clearly lists the offshore vessels managed, vessel types and DP class, shore-based superintendent roles, dry-docking projects, machinery experience, certificates and current location. Applications that do not demonstrate the essential offshore-vessel and technical-superintendent requirements may not progress.<br>Only candidates who meet the essential requirements should apply.

Role Description:We are seeking a Senior Mechanical Procurement Engineer for a full-time, on-site position based in Qesm El Sheikh Zaid. In this role, your key responsibilities include managing the procurement process for mechanical equipment and materials, evaluating technical specifications, collaborating with vendors, conducting cost analysis, and ensuring timely delivery of materials for projects. You will also be tasked with maintaining compliance with industry standards and working closely with the engineering and project management teams to ensure project requirements are met. Evaluate and compare mechanical subcontractor prices with estimation benchmarks, negotiate best rates, and prepare subcontract agreements. Issue advance payment certificates with approved cost sheets and secure management approval. Review mechanical quantities (HVAC, plumbing, firefighting) before contracting and issuing purchase orders in coordination with Technical and site teams. Prepare and obtain approval for the mechanical procurement schedule and ensure timely delivery of materials and equipment. Verify purchase order quantities against approved shop drawings and apply appropriate waste factors based on market availability. Coordinate with project teams and subcontractors to resolve discrepancies in work valuations and invoicing. Monitor weekly procurement updates to ensure payments to mechanical subcontractors and suppliers remain on track. Prepare valuations and price breakdowns for mechanical variation orders and support submissions to clients/consultants. Provide cost impacts of mechanical claims, including overhead changes, material price escalation, financing, and currency fluctuations. Review mechanical subcontractors’ final invoices, confirm quantities and deductions, and finalize project cost calculations.<br>Qualifications:Mechanical bachelor's degree. Minimum 5 to 7 years of experience in a procurement role Fit out projects is a must. Giza residents are preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br> <p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p>The required position will be at EET - GL - section (5) area at any site from<br>Alamein up to Marsa Matrouh.</p><br><br> Missions/Main Duties <br><p>Lead MEP Site Engineer experience should be included but not limited to: -<br>Shop drawings review<br>Technical office documents review<br>Supervision all Arch. &amp; finishes and landscape items and activities.<br>Lead all disciplines work to ensure progress.<br>Background of all other engineering fields (Civil - MEP - SYSTEMS -<br>etc................)</p><br><br> Profile/Skills <br><p>Lead MEP Site Engineer Skills should be included but not limited to: -<br>Management &amp; Coordination Skills<br>Decision maker.<br>Teamwork cooperation.<br>Leadership skills.<br>Ability to work under pressure and hard conditions.<br>Availability to work at many places and smooth movement as per work<br>requirement.</p><br><br> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>On-site</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>·</span></span><span><span>Implement cost control plans on time and coordinate with the project managers, technical offices and tender department for collecting all data and required documents and making sure it is correct.</span></span></p><br><p><span><span>·</span></span><span><span>Study and analyze items of technical works, the stages and period of project implementation, project needs, lists of quantities and other cost elements, prepare tables of cost estimate and balance of project implementation and submit it to the line manager for revising.</span></span></p><br><p><span><span>·</span></span><span><span>Study the items of direct and indirect costs for identifying cost centers according to that and upload the expense items on its cost center and review it with the line manager.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare the reports of project cost control, including statements of project estimated costs compared to the actual costs, submit the reports to the line manager, analyze deviations, explain the reasons for the expected risks and suggest the corrective and preventive actions to be taken.</span></span></p><br><p><span><span>·</span></span><span><span>Follow-up with project managers the position of projects towards the timelines, requirements and new work items, study the effect of that on direct and indirect expenses and update project balances according to the line manager directions.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare reports that include the comparisons between the actual prices for project needs and the specified price at studies explaining deviations and its effects and coordinate with a procurement department to study the ability of cost control.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare an integrated and updated database includes the costs of every project element to be a reference for the estimation of the future project costs.</span></span></p><br><p><span><span>·</span></span><span><span>Help the line manager to prepare the reports and final statistics that reflect the final costs of technical work items of the project.</span></span></p><br><br><br> <p><span><span><strong>Minimum</strong></span></span></p><br><br><p><span><span>- </span></span><span><span>Years of experience:</span></span></p><br><p><span><span>1-3 years</span></span></p><br><br><p><span><span>- Academic Qualifications:</span></span></p><br><p><span><span>BSc. Engineering (Construction Management, Civil/Mech./Electrical)</span></span></p><br><br><p><span><span>- Professional Certificates:</span></span></p><br><br><p><span><span>- Language proficiency:</span></span></p><br><p><span><span>Intermediate in English</span></span></p><br><br><p><span><span>- Computer skills:</span></span></p><br><p><span><span>MS Office / ERP</span></span></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>·</span></span><span><span>Implement cost control plans on time and coordinate with the project managers, technical offices and tender department for collecting all data and required documents and making sure it is correct.</span></span></p><br><p><span><span>·</span></span><span><span>Study and analyze items of technical works, the stages and period of project implementation, project needs, lists of quantities and other cost elements, prepare tables of cost estimate and balance of project implementation and submit it to the line manager for revising.</span></span></p><br><p><span><span>·</span></span><span><span>Study the items of direct and indirect costs for identifying cost centers according to that and upload the expense items on its cost center and review it with the line manager.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare the reports of project cost control, including statements of project estimated costs compared to the actual costs, submit the reports to the line manager, analyze deviations, explain the reasons for the expected risks and suggest the corrective and preventive actions to be taken.</span></span></p><br><p><span><span>·</span></span><span><span>Follow-up with project managers the position of projects towards the timelines, requirements and new work items, study the effect of that on direct and indirect expenses and update project balances according to the line manager directions.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare reports that include the comparisons between the actual prices for project needs and the specified price at studies explaining deviations and its effects and coordinate with a procurement department to study the ability of cost control.</span></span></p><br><p><span><span>·</span></span><span><span>Prepare an integrated and updated database includes the costs of every project element to be a reference for the estimation of the future project costs.</span></span></p><br><br><br><p><span><span>Help the line manager to prepare the reports and final statistics that reflect the final costs of technical work items of the project.</span></span></p><br> <p><span><span><strong>Minimum</strong></span></span></p><br><br><p><span><span>- </span></span><span><span>Years of experience:</span></span></p><br><p><span><span>1-3 years</span></span></p><br><br><p><span><span>- Academic Qualifications:</span></span></p><br><p><span><span>BSc. Engineering (Construction Management, Civil/Mech./Electrical)</span></span></p><br><br><p><span><span>- Professional Certificates:</span></span></p><br><br><p><span><span>- Language proficiency:</span></span></p><br><p><span><span>Intermediate in English</span></span></p><br><br><p><span><span>- Computer skills:</span></span></p><br><p><span><span>MS Office / ERP</span></span></p><br><br><br><br> </div>

<p><strong>Key Responsibilities :</strong></p><h3></h3><ul><li><p>Prepare, review, and coordinate mechanical shop drawings, coordination drawings, and as-built drawings.</p></li><li><p>Review mechanical design drawings, specifications, BOQs, and contract documents.</p></li></ul><ul><li><p>Coordinate with consultants, clients, and multidisciplinary teams.</p></li><li><p>Prepare RFIs, method statements, and quantity take-offs.</p></li><li><p>Support the procurement process through material approvals, technical evaluations, supplier document reviews, and compliance verification.</p></li></ul><ul><li><p>Ensure compliance with project specifications, consultant requirements, applicable codes and standards, and authority regulations.</p></li><li><p>Provide technical support to site execution and QA/QC teams.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in mechanical engineering. (<strong>Governmental university</strong>).</p></li><li><p>5+ years of experience including technical office work.</p></li><li><p>Proficiency in AutoCAD, Revit MEP (BIM), and Microsoft Office.</p></li><li><p>Familiarity with local authority standards and infrastructure specifications.</p></li><li><p>Strong communication, coordination, and problem-solving skills.</p></li></ul><p></p>

Lead MEPI BIM Coordinator<br>???? New Cairo, Egypt????️ Building Services | BIM Coordination???? Full-time<br>Hire Pals is supporting a leading international engineering consultancy in hiring a Lead MEPI BIM Coordinator for its team in New Cairo.<br>We’re looking for an experienced BIM professional who can lead mechanical coordination across complex building projects, ensuring models are accurate, coordinated, constructible and compliant with project BIM standards.<br>What you’ll be doing Develop and implement BIM coordination strategies throughout the project lifecycle. Lead the coordination of mechanical and wider MEPI BIM models. Ensure compliance with BIM Execution Plans, project standards and modelling protocols. Manage clash detection and resolution using Navisworks. Lead multidisciplinary model reviews and coordination meetings. Review models for accuracy, quality and constructability. Develop and oversee mechanical models using Revit. Work with BIM 360, Autodesk Construction Cloud and Auto CAD. Collaborate closely with design, BIM and construction teams. Mentor junior BIM team members and review their work. Promote consistent BIM standards, workflows and continuous improvement. Support the use of Dynamo and other digital tools to improve efficiency.<br>What we’re looking for Bachelor’s degree in Mechanical Engineering. At least 13 years of relevant experience. Strong hands-on experience with Revit and Navisworks. Proven experience leading mechanical or MEPI BIM coordination. Strong knowledge of clash detection, multidisciplinary coordination and model-quality reviews. Experience implementing BIM Execution Plans and modelling standards. Experience with BIM 360, Autodesk Construction Cloud and Auto CAD. Project experience across commercial, residential and healthcare developments. Strong understanding of mechanical Building Services systems. Excellent leadership, communication and problem-solving skills. Ability to coordinate effectively across design and construction teams. Dynamo knowledge is advantageous. GCC or international project experience is preferred.<br>The ideal candidate You are a technically strong BIM leader who can take ownership of complex coordination activities, resolve clashes and maintain high modeling standards across multidisciplinary projects. You combine strong mechanical knowledge with the ability to lead teams, communicate clearly and deliver coordinated, constructible models.

Job details We are seeking a highly creative and concept-driven professional to join our team as an Experiential Creative. The ideal candidate will have a strong background in developing innovative activation concepts, experiential campaigns, retail experiences, and BTL initiatives that bring brands to life.<br>Key Responsibilities Creative Concept Development- Develop creative concepts for brand activations, mall activations, roadshows, product launches, retail experiences, trade activations, pop-ups, and installations.- Translate client briefs into engaging experiential concepts and consumer journeys.- Generate multiple creative routes aligned with brand objectives and budgets. Campaign & Activation Planning- Design activation mechanics that drive engagement, product trial, footfall, data capture, social sharing, and consumer participation.- Create concepts with measurable business outcomes. Pitch & Presentation Development- Contribute to pitch-winning presentations.- Develop creative narratives, concept rationales, and storytelling frameworks.- Support mood boards, references, and visual direction development. Cross-Functional Collaboration- Work closely with Account Management, Strategy, Design, 3D, and Production teams.- Ensure concepts are feasible, executable, and aligned with project timelines and budgets. Production Awareness- Develop ideas with consideration for fabrication, materials, venue limitations, technical requirements, and production realities.<br>Requirements- 3–6 years of experience in a BTL, experiential marketing, event, retail activation, or advertising agency.- Strong conceptual and creative thinking skills.- Experience in brand activations, experiential campaigns, and consumer engagement initiatives.- Excellent presentation and storytelling abilities.- Understanding of production and fabrication processes.- Ability to manage multiple projects and work under tight deadline

We're looking for Electric Generator Maintenance Engineer to support in one of the strategic projects in New Capital. Will be responsible for the routine care, diagnostic troubleshooting, and repair of diesel generator sets and control systems. This role includes hands-on technical execution, programming control panels, commissioning synchronization panels, and supervising field installations.<br>Key Responsibilities Preventive Care: Perform routine maintenance on diesel generator sets, including oil changes, filter replacements, and coolant level checks. Troubleshooting: Diagnose and repair mechanical and electrical issues, such as starting failures, operating inefficiencies, or unexpected shutdowns. Testing: Conduct rigorous repairs, troubleshooting, and diagnostic tests on diverse diesel generators. Controller Programming: Install, configure, and program specialized controllers including Deepsea, Com Ap, Datakom, and Emko. Panel Commissioning: Execute the commissioning and testing of generator synchronization panels. Installation & Deployment: Supervise diesel generator installation, commissioning, and initial start-up phases on-site. Protocol Adherence: Maintain strict alignment with site engineering standards and military security protocols.<br>Requirements & Qualifications Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Mechatronics. Deep knowledge of diesel engine mechanics, power generation systems, and control panel automation. Proven field experience (2:4 years) with Deepsea, Com Ap, Datakom, or Emko controller units. Project Location: On-site deployment at a strategic project within Egypt's New Administrative Capital. Ability to strictly comply with military security protocols and rigorous site access safety rules.

Export Operations Specialist – Freight Forwarding Company: DGX Logistics Department: Operations Position: Export Operations Specialist Location: New Cairo, Egypt Reports to: Operations Supervisor / Operations Manager Employment Type: Full-time<br>Job Summary The Export Operations Specialist is responsible for managing export shipments from booking through final departure, ensuring accurate documentation, timely coordination with customers, shipping lines, airlines, transporters, customs brokers, and internal teams. The role requires strong attention to detail, knowledge of freight forwarding procedures, excellent follow-up skills, and the ability to manage multiple shipments and deadlines simultaneously.<br>EXPERIENCE IN Freight Forwarding is a MUST.<br>Key Responsibilities Export Shipment Management Handle export shipments from booking confirmation until vessel/flight departure. Coordinate bookings with shipping lines, airlines, and overseas agents. Follow up on vessel/flight schedules, cut-off dates, ETD/ETA, and shipment status. Coordinate cargo pickup, transportation, stuffing, and delivery to port/terminal. Ensure shipments meet documentation and operational deadlines. Monitor shipment milestones and proactively resolve delays or operational issues. Documentation Prepare and verify export documentation, including:Commercial invoices Packing lists Bills of Lading / Sea Waybills Air Waybills Certificates of Origin Export declarations and customs documentation Shipping instructions Check documents for accuracy and compliance before submission. Coordinate with customers to obtain missing or corrected documents. Ensure timely submission of Shipping Instructions and other required documents. Customs & Port Coordination Coordinate with customs clearance teams regarding export procedures. Follow up on customs declarations, inspections, and approvals. Coordinate with ports, terminals, shipping lines, and transport providers. Ensure cargo is delivered within applicable port and shipping-line cut-off times. Customer Service Provide customers with regular shipment updates. Respond promptly to customer inquiries and operational requests. Inform customers immediately about delays, changes, additional charges, or documentation issues. Maintain professional and effective communication with clients. Financial & Operational Control Verify freight and local charges against agreed quotations. Coordinate with the pricing and accounting teams regarding shipment charges. Ensure correct billing information is submitted after shipment completion. Monitor additional charges such as storage, demurrage, detention, trucking, handling, and documentation fees. System & Reporting Maintain accurate shipment records in the company's systems and files. Update shipment status and operational milestones regularly. Prepare daily/weekly shipment reports when required. Maintain organized documentation for audit and internal control purposes. Ensure all shipment files are complete and properly archived. Requirements Bachelor's degree in Logistics, Supply Chain, Business Administration, or a related field.2–4 years of experience in export operations within freight forwarding or logistics. Good knowledge of international shipping and export procedures. Experience with FCL/LCL shipments is preferred. Good understanding of Incoterms and shipping documentation. Good knowledge of Egyptian ports and export procedures. Strong communication and negotiation skills. Excellent follow-up and problem-solving abilities. Strong attention to detail and ability to work under pressure. Good command of written and spoken English. Good knowledge of Microsoft Office, particularly Excel and Outlook. Key Competencies Export shipment coordination Documentation accuracy Customer service Time management Problem solving Communication Attention to detail Deadline management Teamwork Ability to multitask What We Offer Competitive salary package Professional and dynamic work environment Opportunities for career development Exposure to international freight forwarding operations Performance-based growth opportunities<br>To apply: Send your CV to whatsapp 01003266993 or hr@dgxlog.com with the subject line “Export Operations Specialist – DGX Logistics.”

Company Description<br>Petro Marine Offshore Projects Support Co. is an Egyptian marine services company operating a diverse fleet of offshore support vessels across the Mediterranean Sea, Red Sea, and Arabian Gulf. Our operations include offshore vessel chartering and management, anchor handling, towing and supply, diving and pipeline inspection support, dredging support, vessel repairs, and marine consultancy. Safety, compliance, operational readiness, and reliable service are central to our work.<br>Role Description<br>We are looking for a Crewing Officer to join our team in the 5th Settlement, New Cairo. The primary responsibility of this role is to recruit qualified and reliable officers and ratings for Petro Marine’s offshore vessels. The successful candidate will manage the recruitment process from sourcing and screening through selection, document verification, and onboarding, while maintaining a strong and readily available pool of seafarers for planned and urgent vessel requirements.<br>Key Responsibilities<br>• Proactively source qualified officers and ratings through recruitment platforms, referrals, company databases, manning agencies, maritime academies, and industry networks.• Build and maintain an active database and talent pool of seafarers for current and future vacancies across Petro Marine’s fleet.• Review CVs and sea-service records, shortlist suitable candidates, and match their experience to vessel, rank, flag-state, client, and operational requirements.• Conduct initial interviews to assess candidates’ offshore experience, technical suitability, communication skills, availability, salary expectations, and overall fitness for the role.• Verify Certificates of Competency, STCW certificates, seaman’s books, medical fitness certificates, DP certificates where applicable, flag endorsements, training records, visas, and other joining documents.• Verify sea-service history, previous vessel types, references, and past performance before recommending candidates for final selection.• Coordinate technical and final interviews with Marine, Technical, Operations, and vessel management personnel.• Prepare candidate shortlists and clearly communicate recruitment recommendations to management.• Coordinate job offers, joining instructions, pre-employment requirements, and onboarding for selected seafarers.• Work closely with the Crewing and Operations teams to understand upcoming crew changes, relief requirements, new mobilisations, and urgent manpower shortages.• Maintain accurate records of candidate availability, rank, certificates, experience, expected salary, interview results, references, and previous appraisals.• Monitor the recruitment pipeline and provide regular reports on open vacancies, shortlisted candidates, interviews, selections, and pending joining requirements.• Develop and maintain relationships with reliable manning agencies, maritime training centres, and other recruitment sources.• Support urgent recruitment and replacement requirements to prevent delays to vessel operations.• Ensure recruitment practices comply with MLC 2006, STCW, flag-state requirements, client requirements, and company procedures.• Maintain the confidentiality and accuracy of all candidate and seafarer information.<br>Qualifications<br>• Bachelor’s degree in Maritime Studies, Business Administration, Human Resources, or a related field is preferred.• Minimum of 3 years of experience in marine crewing or seafarer recruitment.• Previous recruitment experience for offshore support vessels such as AHTS, PSV, DSV, crew boats, or DP vessels is essential.• Strong network within the Egyptian maritime labour market and the ability to source qualified seafarers quickly.• Good working knowledge of STCW, MLC 2006, Certificates of Competency, flag endorsements, safe-manning requirements, and seafarer documentation.• Strong CV-screening, interviewing, reference-checking, and candidate-assessment skills.• Proficiency in Microsoft Excel and Microsoft Office; experience with crewing, recruitment, or HR software is preferred.• Good command of written and spoken English and Arabic.• Strong communication, negotiation, organisation, attention to detail, and follow-up skills.• Ability to work accurately under pressure and respond to urgent recruitment requirements outside normal working hours when necessary.• Ability to commute to the 5th Settlement is required; nearby residents are preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>If you combine strong mechanical engineering knowledge with a genuine commercial mindset and enjoy working directly with customers, this is an opportunity to take ownership of a growing market and help businesses solve technical challenges across clean process and filtration applications.<br> Our client is a global provider of advanced air filtration and clean process solutions serving commercial, industrial, and highly regulated environments.<br> Its solutions support organizations where air quality, process protection, controlled environments, and reliable filtration are critical.<br> Why This Opportunity Matters As an HVAC B2B Sales Engineer , you will sit at the intersection of engineering, customer relationships, and technical sales.<br> You will work directly with customers across Egypt to understand their applications, identify their technical requirements, and support the development of appropriate solutions.<br> This is a highly customer-facing role where technical credibility and the ability to understand customer needs are just as important as commercial drive.<br> The role is particularly suited to a Mechanical Engineer with experience in pharmaceutical or life sciences applications, ideally combined with exposure to HVAC, filtration, clean process, or related industrial solutions.<br> You will have significant ownership of your territory and customer relationships, with the expectation that you can operate independently while working as part of a broader international team.<br> What You'll Own Develop and manage customer relationships across Egypt within clean process, filtration, and related industrial applications.<br> Identify and develop new B2B sales opportunities across Pharmaceuticals, Life Sciences, Food &amp; Beverage, and other relevant industrial environments.<br> Visit customers and understand their technical applications, operational requirements, and challenges.<br> Act as a trusted technical point of contact, building credibility with customers through a strong understanding of their industry and applications.<br> Handle customer technical inquiries and work toward appropriate technical solutions based on their requirements.<br> Apply your knowledge of HVAC, filtration, clean process, and related applications to support customer requirements.<br> Support customers throughout the technical sales process, from understanding their requirements through solution discussions and commercial follow-up.<br> Build and maintain strong relationships with technical and commercial stakeholders within customer organizations.<br> Work closely with internal teams and colleagues across different functions and countries to support customer requirements and opportunities.<br> Develop your territory proactively, identify opportunities, and maintain consistent follow-up with existing and potential customers.<br> Represent the company professionally during customer meetings, site visits, technical discussions, presentations, and relevant industry activities.<br> Manage your activities independently and take ownership of customer relationships, opportunities, and follow-up across your territory.<br> Contribute to achieving sales objectives through consultative, technically credible B2B selling.<br> What You'll Get This role offers the opportunity to build your career at the intersection of engineering, technical sales, and customer relationship management.<br> You'll work directly with customers across Egypt, gain exposure to technically demanding applications, and develop your expertise in industries where filtration, clean processes, air quality, and operational performance are critical.<br> You'll also work within an international environment alongside colleagues from different countries and functions, while having significant autonomy and ownership of your customer relationships and market activities.<br> If you're a Mechanical Engineer who enjoys solving customer problems, building relationships, being in the field, and turning technical expertise into commercial value, this could be an excellent opportunity to take the next step in your technical sales career.<br> What Makes You Successful You'll thrive in this role if you are technically confident, commercially driven, customer-focused, and comfortable taking ownership without being heavily managed.<br> You should bring: A Bachelor's degree in Mechanical Engineering.<br> Supporting clients within the Pharmaceutical/Life Sciences or applications is important for this role.<br> 2–5 years of relevant experience in technical sales, sales engineering, application engineering, or a closely related customer-facing technical role.<br> Proven practical experience in HVAC, air filtration, industrial filtration, clean process applications, or related technical solutions.<br> Experience working directly with customers and understanding their technical requirements and applications.<br> The ability to translate customer requirements into appropriate technical solutions and communicate those solutions clearly.<br> A genuine interest in B2B technical sales and the ability to combine technical credibility with commercial awareness.<br> Strong communication and relationship-building skills, with the confidence to interact directly with customers and technical stakeholders.<br> A proactive, energetic, and self-motivated approach to work.<br> The ability to work independently, prioritize activities, manage customer follow-up, and take ownership of your territory.<br> Strong and fluent English and Arabic communication skills.<br> A valid driving licence and reliable access to a vehicle for business travel.<br> The flexibility and willingness to travel regularly across Egypt, including Cairo, Alexandria, and other governorates as required.<br> Particularly Relevant Backgrounds Candidates with experience in any of the following areas are particularly encouraged to apply: HVAC Sales Engineering Air filtration and industrial filtration Dust collection systems Clean process and controlled-environment applications Air quality and ventilation solutions Application Engineering related to HVAC, filtration, or dust collection Technical sales of HVAC, filtration, dust collection, or related industrial solutions</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>If you combine strong mechanical engineering knowledge with a genuine commercial mindset and enjoy working directly with customers, this is an opportunity to take ownership of a growing market and help businesses solve technical challenges across clean process and filtration applications.<br> Our client is a global provider of advanced air filtration and clean process solutions serving commercial, industrial, and highly regulated environments.<br> Its solutions support organizations where air quality, process protection, controlled environments, and reliable filtration are critical.<br> Why This Opportunity Matters As a B2B Sales Engineer - Clean Process &amp; Filtration , you will sit at the intersection of engineering, customer relationships, and technical sales.<br> You will work directly with customers across Egypt to understand their applications, identify their technical requirements, and support the development of appropriate solutions.<br> This is a highly customer-facing role where technical credibility and the ability to understand customer needs are just as important as commercial drive.<br> The role is particularly suited to a Mechanical Engineer with experience in pharmaceutical or life sciences applications, ideally combined with exposure to HVAC, filtration, clean process, or related industrial solutions.<br> You will have significant ownership of your territory and customer relationships, with the expectation that you can operate independently while working as part of a broader international team.<br> What You'll Own Develop and manage customer relationships across Egypt within clean process, filtration, and related industrial applications.<br> Identify and develop new B2B sales opportunities across Pharmaceuticals, Life Sciences, Food &amp; Beverage, and other relevant industrial environments.<br> Visit customers and understand their technical applications, operational requirements, and challenges.<br> Act as a trusted technical point of contact, building credibility with customers through a strong understanding of their industry and applications.<br> Handle customer technical inquiries and work toward appropriate technical solutions based on their requirements.<br> Apply your knowledge of HVAC, filtration, clean process, and related applications to support customer requirements.<br> Support customers throughout the technical sales process, from understanding their requirements through solution discussions and commercial follow-up.<br> Build and maintain strong relationships with technical and commercial stakeholders within customer organizations.<br> Work closely with internal teams and colleagues across different functions and countries to support customer requirements and opportunities.<br> Develop your territory proactively, identify opportunities, and maintain consistent follow-up with existing and potential customers.<br> Represent the company professionally during customer meetings, site visits, technical discussions, presentations, and relevant industry activities.<br> Manage your activities independently and take ownership of customer relationships, opportunities, and follow-up across your territory.<br> Contribute to achieving sales objectives through consultative, technically credible B2B selling.<br> What You'll Get This role offers the opportunity to build your career at the intersection of engineering, technical sales, and customer relationship management.<br> You'll work directly with customers across Egypt, gain exposure to technically demanding applications, and develop your expertise in industries where filtration, clean processes, air quality, and operational performance are critical.<br> You'll also work within an international environment alongside colleagues from different countries and functions, while having significant autonomy and ownership of your customer relationships and market activities.<br> If you're a Mechanical Engineer who enjoys solving customer problems, building relationships, being in the field, and turning technical expertise into commercial value, this could be an excellent opportunity to take the next step in your technical sales career.<br> What Makes You Successful You'll thrive in this role if you are technically confident, commercially driven, customer-focused, and comfortable taking ownership without being heavily managed.<br> You should bring: A Bachelor's degree in Mechanical Engineering.<br> Relevant experience working with Pharmaceutical/Life Sciences customers or applications.<br> This is an important requirement for the role.<br> 2–5 years of relevant experience in technical sales, sales engineering, application engineering, or a closely related customer-facing technical role.<br> Practical experience or strong knowledge of HVAC, air filtration, industrial filtration, clean process applications, or related technical solutions.<br> Experience working directly with customers and understanding their technical requirements and applications.<br> The ability to translate customer requirements into appropriate technical solutions and communicate those solutions clearly.<br> A genuine interest in B2B technical sales and the ability to combine technical credibility with commercial awareness.<br> Strong communication and relationship-building skills, with the confidence to interact directly with customers and technical stakeholders.<br> A proactive, energetic, and self-motivated approach to work.<br> The ability to work independently, prioritize activities, manage customer follow-up, and take ownership of your territory.<br> Strong and fluent English and Arabic communication skills.<br> A valid driving licence and reliable access to a vehicle for business travel.<br> The flexibility and willingness to travel regularly across Egypt, including Cairo, Alexandria, and other governorates as required.<br> Particularly Relevant Backgrounds Candidates with experience in any of the following areas are particularly encouraged to apply: HVAC Sales Engineering Air filtration and industrial filtration Dust collection systems Clean process and controlled-environment applications Air quality and ventilation solutions Application Engineering related to HVAC, filtration, or dust collection Technical sales of HVAC, filtration, dust collection, or related industrial solutions</span> </div>

We are looking for an experienced Mechanical BIM Engineer to join our team and support the delivery of high-quality MEP design and BIM projects. The successful candidate will be responsible for developing and coordinating detailed mechanical models, drawings, schedules, and construction documentation. The role will also involve clash detection, model auditing, design reviews, technical coordination, and supporting junior team members.<br>Responsibilities:<br><br>Develop and update detailed 3D mechanical BIM models using Autodesk Revit MEP and Auto CAD.<br><br><br>Prepare detailed shop drawings, coordination layouts, and as-built documentation.<br><br><br>Perform clash detection and coordination using Navisworks and resolve identified design conflicts.<br><br>Review and coordinate HVAC, plumbing, and fire protection systems in accordance with applicable building codes and project requirements.<br>Perform and review mechanical engineering calculations and system sizing.<br><br>Utilize mechanical design and calculation software such as HAP and other relevant engineering tools.<br><br>Conduct BIM model audits and ensure compliance with project BIM standards and LOD requirements.<br>Maintain model accuracy and consistency throughout different project stages.<br><br>Prepare material reports, quantity take-offs, and schedules when required.<br><br>Provide technical support to site teams and assist in resolving engineering and coordination issues.<br>Coordinate closely with architects, structural engineers, MEP disciplines, clients, and other project stakeholders.<br>Participate in design coordination meetings and design reviews.<br>Support junior engineers and team members by sharing technical knowledge and BIM best practices.<br>Contribute to the continuous improvement of BIM workflows, standards, and documentation processes.<br><br>Required :<br><br>Bachelor's degree in Mechanical Engineering.<br><br><br>5–7 years of professional experience in BIM and MEP engineering.<br><br><br>Strong practical experience with Revit MEP, Navisworks, and Auto CAD.<br><br><br>Good understanding of HVAC, plumbing, and fire protection systems.<br><br><br>Strong knowledge of BIM standards and LOD 300–500.<br><br>Good understanding of mechanical engineering calculations and design principles.<br><br>Experience with HAP or other mechanical design/calculation software.<br><br>Ability to perform clash detection, coordination, and BIM model audits.<br>Strong technical documentation and drawing production skills.<br>Good understanding of applicable local and international building codes.<br>Strong communication, coordination, and teamwork skills.<br>Ability to work effectively with international clients and multidisciplinary project teams.<br>Strong attention to detail and commitment to technical quality.

Company Description<br>Power Lube is an authorized distributor of Exxon Mobil products in Egypt with over 35 years of experience in engine and industrial lubricants. We provide a full range of high-performance Mobil lubricants, and offer a range of lubricant-related services including oil monitoring, storage solutions, surveys and training. Our dedicated team of sales and technical support people offers solutions and ideas to solve many lubrication problems.<br>Role Description<br>This is a full-time on-site role for a Technical Sales Engineer at Power Lube in 10th of Ramadan. The Technical Sales Engineer will be responsible for providing technical support to customers, preparing and presenting proposals, and managing sales. Additionally, the Technical Sales Engineer will oversee product installations, provide training and assist in developing the company’s sales strategy.<br>Qualifications<br>Technical Sales and Technical Support skills Strong Communication and Sales Engineering skills Experience in Sales Excellent problem-solving and analytical skills Bachelor's degree in Engineering or equivalent field Experience with lubricants and industrial equipment is a plus<br>Job Responsibilities and Activities:<br>• Manage the current customers• Use of a pipeline process in order to track, develop and close new accounts.• Maximizing the “face to face” time with the customers through sound time management skills• Work together with the Sales Manager/Lube Engineer/Marketing resources to support the programs deployed in the market to effectively grow and maintain the higher value lubricant products and services.• Support product and brand integrity requirements at customer locations• Manage the Days of Sales Outstanding (DSO) and overdue with the customers and provide support for specific• Account Receivables (AR) collection as required.• Provide basic commercial & technical service for customers.<br>Job Requirements:<br>• Preferably a Bachelor’s Degree (Mechanical, Mechatronics, Industrial, Petroleum, Petrochemicals or Chemical Engineering).• Sales Experience or Industry experience (preferably).• Excellent command of English (Verbal and Written).• Working Knowledge of MS Office.• Must own a car<br>Job Benefits:<br>• Net Salary + Commission• Car allowance• Mobile allowance• Medical and Social insurance<br>Job Location:<br>Plot NO.4 , Block 231 area B - C , Obour City.<br>Working Hours:<br>• 9:00am – 5:00pm Interested candidates, kindly send your updated CV toinfo@powerlube.netand mention the job title in the subject line of your email<br>For more information please contact us 01022182777

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job code: TARE5739</p><br> <p><strong>Job Summary:</strong><br> Responsible for the structural analysis and design of post-tensioned floors and reinforced concrete structures, ensuring compliance with international codes and GCC regulations.</p><br> <p><strong>Key Responsibilities:</strong><br> • Prepare structural calculations, design reports, and technical specifications.<br> • Design post-tension floors and reinforced concrete structures (ACI, ASCE, SBC, IBC).<br> • Coordinate with architects, MEP engineers, and project managers.<br> • Conduct value engineering and optimize structural systems.<br> • Participate in client and authority technical meetings.<br> • Ensure compliance with safety, quality, and project timelines.</p><br> <p><strong>Requirements:</strong><br> • Bachelor’s degree in civil/Structural Engineering (Master’s preferred).<br> • 5–10 years of structural design experience, including GCC projects.<br> • Proficiency in RAM Concept, ETABS, SAFE, SAP2000, and Adapt.<br> • Familiarity with PT construction sequencing and stressing procedures.<br> • Knowledge of wind and seismic design principles.<br> • Strong communication and leadership skills.<br> • BIM modeling experience and familiarity with local authority submissions are a plus.</p><br> <br> </div>

<p><b>JOB SUMMARY</b></p><p><br></p><p>&nbsp;Provides a high level of property maintenance knowledge. Position has overall responsibility for maintaining the building, grounds and physical plant with particular attention towards safety, security and asset protection. Accountable for managing the budget, capital expenditure projects, preventative maintenance and energy conservation. Develops and implements strategies that will deliver products and services, which meet or exceed the needs and expectations of guests and employees while maximizing the financial performance. Responsible for maintaining standards and regulatory requirements. Leads the emergency response team for all facility issues.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or GED; 6 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/Electrical/Plumbing. OR 2-year degree from an accredited university in Building and Construction, Engineering, Mechanics, or related major; 4 years experience in the engineering and maintenance or related professional area; technical training in HVAC-R/Electrical/Plumbing.</p>

Key Responsibilities - Design and launch our first customer loyalty program, including tier structure, rewards logic, and redemption strategy tailored to a luxury retail audience - Lead vendor evaluation and selection for the loyalty technology platform, weighing native Dynamics 365 Commerce capabilities against third-party loyalty/CDP platforms - Own the identity-resolution strategy that unifies customer data across 150 stores (POS) and the online/app channel into a single customer profile - Partner with IT/tech teams to integrate the loyalty platform with our existing ERP (Microsoft Dynamics 365) and marketing automation tool (MoEngage) - Define and track program KPIs: enrollment rate, repeat purchase rate, incremental spend, cross-category purchase behavior, tier progression - Manage a phased rollout: pilot in a subset of stores, measure results against a control group, then scale to full network - Manage ongoing loyalty partnerships (e.g., co-branded perks, partner redemption options) where relevant - Ensure the program's data handling complies with Saudi PDPL requirements Required Qualifications - 5+ years of experience in CRM, loyalty, or customer experience roles, with at least one full-cycle loyalty program build (design through launch) - Demonstrated experience selecting and implementing a loyalty or CDP platform, including vendor evaluation and integration management - Strong understanding of omnichannel customer data challenges — unifying in-store (POS) and online purchase history into a single customer view - Experience designing tiered/status-based loyalty models (not just points-for-discount mechanics) — ideally within a premium or luxury retail context - Familiarity with marketing automation platforms (MoEngage or equivalent) and how loyalty data feeds into lifecycle campaigns.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Essential responsibilities and daily duties include:&nbsp;</b></p><p><br></p><p>Provide hands-on subject matter expertise in every aspect of technical design, repair, and specification writing associated with the TACTICOS Combat Management System and related weapons and sensor systems on the FMCs.&nbsp;&nbsp;</p><p><br></p><p>Verify work specifications for assigned electronics/combat system jobs.&nbsp;</p><p><br></p><p>Identify Manpower and Trade skill sets required to complete planned work.&nbsp;</p><p><br></p><p>Supervise requisition of material required to complete work specifications.&nbsp;</p><p><br></p><p>Source and obtain technical references and answer technical specifications to prevent delays.&nbsp;</p><p><br></p><p>Train Egyptian Navy local labor in technical writing and in overall skills sets.&nbsp;</p><p><br></p><p>Participate as a member of the Amentum Planning and Estimating Team under the direction of the Lead Planner.&nbsp;</p><p><br></p><p>Collaborate with the shipyard planning office and Technical Assistance Team (TAT) staff to facilitate FMC workload planning activities.&nbsp;&nbsp;</p><p><br></p><p>Ability to obtain a Country Clearance and Base Pass authorization.&nbsp;</p><p><br></p><p>Ability to possess a current passport at least two years before expiration after arrival in Egypt.&nbsp;</p><p><br></p><p>Provide timely and comprehensive inputs for the Monthly Status Report.</p><p><br></p><p><b>Minimum Requirements&nbsp;</b></p><p><br></p><p><font dir="auto" ><font dir="auto" >High School diploma or GED.</font></font></p><p><br></p><p>2 years of experience providing work package planning and estimating support for electronic/combat systems on naval vessels.&nbsp;</p><p><br></p><p>Ability to work independently and in a team environment.&nbsp;</p><p><br></p><p>Ability to communicate verbally and in writing. Must be proficient in English.</p><p><br></p><p>Ability to obtain a country clearance and base pass authorization. Note: US citizenship is required.</p><p><br></p><p>Ability to possess an active passport at least two years after arrival in Egypt.&nbsp;</p><p><br></p><p>Ability to travel CONUS and OCONUS.&nbsp;</p><p><br></p><p>Preferred Qualifications&nbsp;</p><p><br></p><p>2 or more years of experience with work package planning and estimating support for the TACTICOS Combat Management System and related weapons and sensor systems on the FMC vessels of the Egyptian Navy.&nbsp;</p><p><br></p><p>Experience working in an Arab country for long periods.&nbsp;</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or GED.</li><li>2 years of experience providing work package planning and estimating support for electronic/combat systems on naval vessels.</li><li>Ability to work independently and in a team environment.</li><li>Ability to communicate verbally and in writing.</li><li>Must be proficient in English.</li><li>Ability to obtain a country clearance and base pass authorization.</li><li>Note: US citizenship is required.</li><li>Ability to possess an active passport at least two years after arrival in Egypt.</li><li>Ability to travel CONUS and OCONUS.</li><li>2 or more years of experience with work package planning and estimating support for the TACTICOS Combat Management System and related weapons and sensor systems on the FMC vessels of the Egyptian Navy.</li><li>Experience working in an Arab country for long periods.</li></ul><p></p></section>