Ship Mechanic Jobs

<ul><li><p>Supervise and directly oversee on-site installation of electrical systems, including power distribution, cabling, lighting, and earthing/bonding works.</p></li><li><p>Lead installation of <strong>Fire &amp; Gas (F&amp;G) detection systems</strong> — gas detectors, flame/heat detectors, F&amp;G control panels, and interfacing with ESD/PLC systems.</p></li><li><p>Ensure execution complies with relevant international codes and standards (IEC, NEC, NFPA 72 where applicable) and approved shop drawings.</p></li><li><p>Conduct daily site walks, inspections, and loop checks for F&amp;G and electrical systems.</p></li><li><p>Coordinate in real time with other on-site disciplines (mechanical, instrumentation, civil) to resolve conflicts and installation clashes.</p></li><li><p>Manage subcontractors and labor crews on site to meet daily/weekly execution targets.</p></li><li><p>Verify materials and cable/equipment deliveries against approved submittals.</p></li><li><p>Support pre-commissioning and commissioning activities for F&amp;G systems (loop testing, cause &amp; effect verification).</p></li><li><p>Prepare As-Built markups based on actual site execution.</p></li><li><p>Submit daily/weekly site progress reports to project management.</p></li><li><p>Ensure site safety (HSE) compliance during electrical installation and testing activities.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering (Power or Communications).</p></li><li><p>2+ years of <strong>hands-on site experience</strong> in electrical construction, with proven exposure to <strong>Fire &amp; Gas system installation</strong> (EPC, Oil &amp; Gas, or industrial projects preferred).</p></li><li><p>Solid understanding of cable installation, termination, cause &amp; effect logic, and F&amp;G panel wiring.</p></li><li><p>Comfortable working full-time at project site locations, including remote or industrial sites.</p></li><li><p>Familiarity with AutoCAD for reading and marking up electrical/F&amp;G drawings on site.</p></li><li><p>Strong site coordination and conflict-resolution skills.</p></li><li><p>Good command of English; Arabic native or fluent.</p></li><li><p>Egyptian military service completed or exempted (for male candidates).</p></li></ul><p></p>

<h3>Job Purpose</h3><p>Responsible for designing, planning, and supervising the implementation of irrigation networks and wet utility infrastructure across agricultural farms, ensuring efficient water distribution, proper system performance, and compliance with approved technical standards and project requirements.</p><h3>Key Responsibilities</h3><ul><li><p>Design irrigation networks for agricultural farms based on crop requirements, water availability, and site conditions.</p></li><li><p>Prepare irrigation network layouts, hydraulic calculations, pipe sizing, and pressure requirements.</p></li><li><p>Design and coordinate mainlines, sub-mainlines, manifolds, valves, filters, pumps, and drip/sprinkler irrigation systems.</p></li><li><p>Conduct site surveys and assess existing infrastructure, water sources, elevations, and field conditions.</p></li><li><p>Prepare and review technical drawings, shop drawings, BOQs, material specifications, and as-built drawings.</p></li><li><p>Supervise the installation and implementation of irrigation networks at site.</p></li><li><p>Monitor contractors and installation teams to ensure execution according to approved drawings, specifications, and quality standards.</p></li><li><p>Inspect installed pipelines, valves, fittings, irrigation equipment, and related infrastructure.</p></li><li><p>Coordinate pressure testing, flushing, commissioning, and trial operation of irrigation systems.</p></li><li><p>Identify and resolve technical issues during construction and implementation.</p></li><li><p>Coordinate with Agricultural, Mechanical, Civil, and Site Operations teams to ensure proper integration of irrigation systems.</p></li><li><p>Follow up on project progress, materials, quantities, and implementation schedules.</p></li><li><p>Ensure proper documentation of completed works and update drawings based on actual site conditions.</p></li><li><p>Support the maintenance and optimization of irrigation networks when required.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in <strong>Civil Engineering.</strong></p></li><li><p>Experience in <strong>irrigation network design and site implementation</strong>, preferably within agricultural farms.</p></li><li><p>Good knowledge of irrigation systems, hydraulic calculations, and field execution.</p></li><li><p>Proficiency in AutoCAD; knowledge of Civil 3D or relevant irrigation design software is an advantage.</p></li><li><p>Good communication, coordination, problem-solving, and site management skills.</p></li></ul><p></p>

<h1>Role and responsibilities</h1><ol><li><p><strong>Production Process</strong>:</p><ul><li><p>Monitor production processes in real-time on the shop floor to ensure they run within specified parameters.</p></li><li><p>Respond to line downtime events by assisting with diagnostics and basic troubleshooting.</p></li><li><p>Document process parameters, interruptions, and production outputs accurately and timely.</p></li></ul></li><li><p><strong>Data Analysis &amp; Reporting</strong>:</p><ul><li><p>Collect data analysis on yield, efficiency, and downtime.</p></li><li><p>Prepare daily shift reports on production performance.</p></li></ul></li><li><p><strong>Process Improvement &amp; Problem-Solving</strong>:</p><ul><li><p>Participate in root cause analysis investigations for quality defects or equipment failures.</p></li><li><p>Support in implementing the best practices to improve capacity, quality, and reliability.</p></li></ul></li><li><p><strong>Quality, Safety &amp; Compliance</strong>:</p><ul><li><p>Ensure all activities comply with standard operating procedures (SOPs) and quality standards.</p></li><li><p>Follow all safety protocols and contribute to maintaining a safe work environment.</p></li><li><p>Conduct product sampling timely and accurately to confirm product compliance.</p></li></ul></li></ol><p></p><p><strong>Requirements</strong></p><p></p><ul><li><p><strong>Qualifications and education requirements</strong></p><p></p><ul><li><p><strong>Education</strong>: Bachelor's degree in Mechanical Engineering, Production Engineering, Industrial Engineering, or a related field.</p></li><li><p><strong>Experience</strong>: 0-2 years of relevant experience in production jobs.</p></li><li><p><strong>Analytical Skills</strong>: Strong ability to analyze data, identify trends, and solve complex problems effectively.</p></li><li><p><strong>Teamwork</strong>: Ability to work collaboratively in a team environment and manage relationships with key stakeholders.</p></li><li><p><strong>Communication Skills</strong>: Excellent verbal and written communication skills, with a proficiency in English.</p></li><li><p><strong>12 hours rotational based shifts.</strong></p></li><li><p><strong>Location</strong>: Preference for candidates residing in Giza.</p></li><li><p><strong>Workload &amp; Physical Demands</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; This role is physically active, with 100% of time spent on the shop floor, where an estimated 70% of the time spent on hands-on jobs (e.g., walking, standing, inspecting equipment, providing hands-on support), and 30% on metal tasks (e.g., data analysis, reporting, problem-solving).</p></li></ul></li></ul><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Role Purpose</strong></p><br><p>Lead Operational Excellence initiatives across manufacturing operations to improve productivity, efficiency, quality, and cost through Lean Manufacturing, process optimization, and continuous improvement while ensuring compliance with cGMP, EHS, and regulatory requirements.</p><br><p><strong>Key Responsibilities</strong></p><br><ul><li>Lead production and/or packaging teams to achieve production target.</li><li>Lead Lean Manufacturing and Continuous Improvement initiatives across production operations.</li><li>Drive process optimization, waste reduction, and productivity improvement projects.</li><li>Monitor and improve manufacturing KPIs including OEE, throughput, cycle time, and equipment utilization.</li><li>Identify process bottlenecks and implement sustainable improvement solutions.</li><li>Lead Root Cause Analysis (RCA), CAPA, and problem-solving activities.</li><li>Facilitate Lean tools such as 5S, Kaizen, Value Stream Mapping (VSM), and Visual Management.</li><li>Collaborate with Production, Engineering, Maintenance, Quality, and Supply Chain to improve operational performance.</li><li>Support equipment commissioning, process validation, technology transfer, and CAPEX projects from an Operational Excellence perspective.</li><li>Develop dashboards, monitor performance metrics, and report improvement progress.</li><li>Ensure compliance with cGMP, EHS, Quality Systems, and Data Integrity requirements.</li><li>Coach and develop manufacturing teams on Operational Excellence principles and continuous improvement methodologies.</li></ul><p><strong>Qualifications</strong></p><br><ul><li>Bachelor’s degree in Pharmacy,Pharmaceutical Engineering, Industrial Engineering, Mechanical Engineering, or a related Engineering major.</li><li>4–6 years of experience in pharmaceutical manufacturing or industrial operations.</li><li>Minimum 3 years of experience in Operational Excellence, Continuous Improvement, Industrial Engineering, or Manufacturing Excellence.</li><li>Experience in sterile pharmaceutical manufacturing is preferred.</li><li>Strong knowledge of Lean Manufacturing, Six Sigma, OEE, and cGMP requirements.</li><li>Excellent analytical, project management, leadership, and communication skills.</li></ul><p><strong><span>Core Competencies</span></strong></p><br><ul><li>Operational Excellence</li><li>Lean Manufacturing</li><li>Continuous Improvement</li><li>Industrial Engineering</li><li>OEE &amp; KPI Management</li><li>Process Optimization</li><li>Root Cause Analysis &amp; CAPA</li><li>Lean Tools (5S, Kaizen, VSM)</li><li>Project Management</li><li>Cross-functional Collaboration</li><li>Leadership &amp; Coaching</li></ul> </div>

<p>We are looking for a skilled and detail-oriented <strong>Plumbing Engineer</strong> to join our construction team. The Plumbing Engineer will be responsible for supervising and coordinating plumbing works on site, ensuring that installations are carried out according to approved drawings, specifications, and project requirements.</p><h3>Responsibilities</h3><ul><li><p>Supervise and monitor the installation of <strong>water supply, drainage, sanitary, and stormwater systems</strong>.</p></li><li><p>Review and interpret <strong>MEP/plumbing drawings, shop drawings, and specifications</strong>.</p></li><li><p>Ensure plumbing works are executed according to approved drawings and required quality standards.</p></li><li><p>Coordinate plumbing activities with <strong>civil, architectural, electrical, HVAC, and other site works</strong>.</p></li><li><p>Check pipe routes, levels, slopes, locations, and dimensions before and during installation.</p></li><li><p>Supervise contractors and subcontractors and monitor their daily progress.</p></li><li><p>Inspect materials and installed works to ensure compliance with project specifications.</p></li><li><p>Perform or review <strong>quantity takeoffs and BOQ measurements</strong> when required.</p></li><li><p>Follow up on testing, inspection, and commissioning of plumbing systems.</p></li><li><p>Prepare site reports, inspection requests, and other required project documentation.</p></li><li><p>Identify technical issues and coordinate with the project team to resolve them efficiently.</p></li><li><p>Ensure compliance with project safety and quality requirements.</p></li></ul><p></p><p><strong>Requirements</strong></p><p></p><ul><li><p>Bachelor’s degree in <strong>Mechanical Engineering</strong> or a related engineering field.</p></li><li><p><strong>2–5 years of experience</strong> in plumbing/MEP construction works.</p></li><li><p>Good practical experience in <strong>plumbing site execution</strong>.</p></li><li><p>Strong knowledge of <strong>water supply, drainage, sanitary, and stormwater systems</strong>.</p></li><li><p>Ability to read and understand <strong>MEP and shop drawings</strong>.</p></li><li><p>Good knowledge of <strong>AutoCAD</strong>.</p></li><li><p>Understanding of <strong>pipe sizing, drainage slopes, and hydraulic calculations</strong>.</p></li><li><p>Experience in site supervision and coordination with different disciplines.</p></li><li><p>Knowledge of <strong>BOQ, quantity takeoff, and material specifications</strong> is an advantage.</p></li><li><p>Strong problem-solving and communication skills.</p></li><li><p>Good attention to detail and ability to work under pressure.</p></li><li><p>Willingness to work on construction sites.</p></li></ul><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<p>LEONI is a global provider of products, solutions and services for energy and data management in the automotive industry. The group of companies has around 86,000 employees in 21 countries and generated consolidated sales of EUR 3.9 billion in 2025.</p><br><p>The value chain ranges from standardized cables and special and data cables to highly complex wiring systems and related components, from development to production. As an innovation partner with distinctive development and systems expertise, we support our customers on the path to increasingly sustainable and connected mobility concepts from autonomous driving to alternative drives as well as charging systems.</p><br><br><br>Job Description<ul><li>Manage and supervise the Segment organizational unit to achieve defined objectives and KPIs</li><li>Lead direct reports by defining objectives, providing clear instructions, and monitoring performance</li><li>Ensure adherence to standards, governance requirements, and process execution</li><li>Identify improvement opportunities and implement measures to enhance team performance and service delivery</li><li>Support professional development of team members through coaching, training needs assessment, and succession planning</li></ul><br><br>Qualifications and Experience<ul><li><p><strong>Education:&nbsp;</strong>Bachelor's degree in Engineering (Industrial or Mechanical) or Operations Management; Six Sigma certification preferred.</p><br></li><li><p><strong>Experience:&nbsp;</strong><strong>3 to 5 years</strong> of experience in production or operations leadership,&nbsp;Experience within the <strong>Automotive industry or Wiring Systems</strong> is highly preferred.</p><br></li><li><p><strong>Language:</strong> Full Professional English proficiency (C1 level) required for presenting technical data to global stakeholders.</p><br></li><li><p><strong>Lean Mastery:</strong> Expert in Kaizen, 5S, and Kanban to optimize OEE and reduce waste.</p><br></li><li><p><strong>Operational Leadership:</strong> Proven ability to manage cross-functional teams, achieve KPIs, optimize resource allocation, and foster a "safety-first" culture (HSE).</p><br></li><li><p><strong>Problem Solving:</strong> Strong analytical skills to troubleshoot technical bottlenecks and implement root-cause solutions.</p><br></li></ul><br> </div>

<p><strong>Project Planning &amp; Scheduling</strong></p><ul><li>Develop, maintain, and oversee detailed project schedules using software like Primavera P6 or MS Project.</li><li>Define project scope, work breakdown structure (WBS), and key milestones.</li><li>Optimize project timelines while balancing resources, costs, and risks.</li></ul><p><strong>Monitoring &amp; Progress Tracking</strong></p><ul><li>Track project progress against baseline schedules and identify potential delays.</li><li>Conduct performance analysis (e.g., Earned Value Management) to measure efficiency.</li><li>Prepare and present reports on project status, including KPIs and forecasting.</li></ul><p><strong>Resource &amp; Risk Management</strong></p><ul><li>Allocate manpower, equipment, and materials efficiently across projects.</li><li>Identify, analyze, and mitigate risks that may impact project timelines.</li><li>Implement recovery plans for delayed tasks or budget overruns.</li></ul><p><strong>Stakeholder Coordination</strong></p><ul><li>Collaborate with project managers, engineers, clients, and contractors.</li><li>Ensure alignment of planning activities with contractual obligations.</li><li>Conduct regular meetings to review progress, discuss challenges, and update stakeholders.</li></ul><p><strong>Team Leadership &amp; Development</strong></p><ul><li>Manage and mentor a team of planning engineers and schedulers.</li><li>Provide training on best practices, software tools, and methodologies.</li><li>Foster a culture of continuous improvement in planning and scheduling.</li></ul><p><strong>Compliance &amp; Documentation</strong></p><ul><li>Ensure adherence to industry standards, contractual requirements, and regulations.</li><li>Maintain accurate records of planning and scheduling data for audits and claims.</li><li>Support claim analysis and extension-of-time (EOT) submissions when necessary.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Construction Management.</li><li>Professional certifications such as PMP</li><li>From 15-20 years of experience in project planning, with at least 5 years in a managerial level.</li><li>Expertise in project scheduling software (Primavera P6, MS Project).</li><li>Strong understanding of engineering, construction, or infrastructure project lifecycles.</li><li>Knowledge of planning methodologies</li><li>Experience in cost control and resource allocation.</li></ul>

<p><strong><u>Job Purpose</u></strong></p><p>Responsible for coordinating the end-to-end sales operations cycle, ensuring seamless collaboration between the Sales Team and all concerned departments, timely order execution, accurate documentation, and effective management reporting.</p><p></p><p><strong><u>Key Responsibilities</u></strong></p><ul><li><p>Coordinate closely with Sales, Finance, Collections, Warehouse, Supply Chain, Service, and other relevant departments.</p></li><li><p>Process and follow up on sales and work orders from initiation through delivery, inspection, invoicing, and collection.</p></li><li><p>Manage and track government, private-sector, tender, and UPA supply orders.</p></li><li><p>Review customer credit limits, outstanding balances, and previous deliveries before processing orders.</p></li><li><p>Verify purchase orders and award notifications against approved technical and commercial offers.</p></li><li><p>Monitor open orders, pending deliveries, stock availability, stock transfers, invoices, and collections.</p></li><li><p>Follow up on inspection and addition reports and ensure all required documentation is completed accurately.</p></li><li><p>Resolve pending orders and invoices through proactive coordination with the relevant departments.</p></li><li><p>Maintain accurate and up-to-date records on the ERP system.</p></li><li><p>Prepare clear daily, weekly, and monthly management reports covering orders, deliveries, invoicing, collections, pending actions, and key operational issues.</p></li><li><p>Identify delays, discrepancies, and potential risks, ensuring proper follow-up and escalation through resolution.</p></li><li><p>Support the Sales Team with quotations, documentation, customer requirements, and other sales coordination activities.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Mechanical, Electrical, Mechatronics, Biomedical Engineering, or a related field.</p></li><li><p>4 – 6 years of relevant experience in Sales Coordination, Sales Operations, or Order Management.</p></li><li><p>Previous experience in the medical equipment sector is highly preferred.</p></li><li><p>Excellent command of English, both written and spoken.</p></li><li><p>Strong proficiency in Microsoft Excel, ERP systems, reporting, and data analysis.</p></li><li><p>Excellent coordination, communication, follow-up, and organizational skills.</p></li><li><p>Strong attention to detail with the ability to manage multiple priorities and meet deadlines.</p></li></ul><p></p>

<ul><li><p>Monitor and analyze the workshop Fleet Rate and ensure optimal utilization of available workshop capacity.</p></li><li><p>Track workshop capacity, productivity, efficiency, and utilization and identify areas for improvement.</p></li><li><p>Develop, monitor, and evaluate KPIs for technicians, workshop engineers, and service reception teams.</p></li><li><p>Prepare regular operational performance reports and highlight gaps against targets.</p></li><li><p>Analyze operational data and recommend corrective actions to improve workshop efficiency and profitability.</p></li><li><p>Coordinate with Workshop, Service Reception, Spare Parts, and other relevant departments to ensure smooth service operations.</p></li><li><p>Monitor technician productivity and ensure proper allocation of workload according to workshop capacity.</p></li><li><p>Support management in setting operational targets and performance standards.</p></li><li><p>Identify operational bottlenecks and implement improvement initiatives to enhance customer service and workshop performance.</p></li><li><p>Follow up on KPI achievement and provide management with regular performance updates.</p></li><li><p>Contribute to developing and implementing operational processes and procedures.</p></li><li><p>Support initiatives aimed at increasing workshop revenue, customer retention, and overall after-sales performance.</p></li><li><p>Participate in Business Development activities when required, particularly those related to increasing service center business and customer volume.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Engineering, preferably Mechanical or Automotive Engineering, or a relevant field.</p></li><li><p>3–5 years of experience in automotive after-sales, service operations, or workshop management.</p></li><li><p>Strong knowledge of automotive workshop operations and service center processes.</p></li><li><p>Good understanding of workshop capacity, productivity, utilization, Fleet Rate, and operational KPIs.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Very good knowledge of Microsoft Excel and data analysis.</p></li><li><p>Strong communication and coordination skills.</p></li><li><p>Ability to work with multiple departments and follow up on performance against targets.</p></li><li><p>Business Development experience is highly preferred.</p></li><li><p>Experience in automotive dealerships, service centers, or after-sales operations is highly preferred.</p></li></ul><p></p>

<h2><strong>Job Description</strong></h2><p>We are looking for a <strong>Sales Engineer</strong> to join our team and support engineers in selecting the most suitable training programs aligned with their career goals.</p><p>The role combines <strong>technical understanding, client advisory, and business development</strong>, where the advisor plays a key role in converting inquiries into enrollments through professional consultation rather than direct selling.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Communicate with engineers interested in technical training programs and understand their career objectives.</p></li><li><p>Recommend suitable courses, learning paths, and certification programs based on technical background and goals.</p></li><li><p>Explain program content, outcomes, schedules, and pricing clearly and professionally.</p></li><li><p>Follow up with potential clients and guide them through the enrollment process.</p></li><li><p>Achieve monthly enrollment and revenue targets.</p></li><li><p>Maintain accurate records of leads, follow-ups, and enrollments using CRM or internal systems.</p></li><li><p>Build long-term relationships with engineers and corporate clients.</p></li><li><p>Collaborate with the training and marketing teams to improve conversion rates and customer experience.</p></li><li><p>Stay updated with available programs, technical fields, and market needs.</p></li></ul><p>&nbsp;</p><p><br></p><p><strong>Requirements</strong></p><h2><strong>Job Requirements</strong></h2><ul><li><p>Bachelor’s degree in a relevant field is required; an engineering background (such as Civil, Electrical, Mechanical, Architecture, or Mechatronics) is preferred.</p></li><li><p>0–3 years of experience in <strong>technical sales, training consultation, customer advisory, or business development</strong>.</p></li><li><p>Strong communication and presentation skills.</p></li><li><p>Ability to explain technical concepts in a simple and persuasive way.</p></li><li><p>Target-oriented mindset with the ability to close enrollments.</p></li><li><p>Good follow-up and negotiation skills.</p></li><li><p>Comfortable working with KPIs, targets, and conversion rates.</p></li><li><p>Very good command of English (written and spoken).</p></li><li><p>Experience in training centers, education, or professional courses is a plus.</p></li><li><p>Familiarity with CRM systems is an advantage.</p></li></ul><p></p>

<ul><li><p>Revise and study design drawings in collaboration with the Design Manager, as well as the necessary staffing to complete the shop-drawing aspects of the project efficiently and effectively.</p></li><li><p>Hold regular meetings with project subcontractors or suppliers to coordinate architectural needs and requirements, solve problems, and clarify technical issues.</p></li><li><p>Support and supervise Junior Shop Drawing architects in the technical office in providing technical assistance and/or reviewing, verifying, and checking drawings, forms, and designs.</p></li><li><p>Prepare technical shop drawings in digital format, as needed, to meet set technical specifications and quality standards and to conform to recognized procedures.</p></li><li><p>Conduct an initial Quantity Survey (QS) to assist the Procurement department in determining the quantities required to plan for subcontractor deals; and provide clarification for the QS team on-site as needed.</p></li><li><p>Write and submit a monthly report to the Architectural project Manager for each project, and/or monitor and evaluate the project's technical progress and performance in terms of Shop Drawing and Design.</p></li><li><p>Obtain and compile all technical information, data, and drawings required from relevant departments for full Shop Drawing coordination across Civil/Structure, Architectural, and Mechanical, Electrical, and Plumbing (MEP) architectural designs.</p></li><li><p>Delivery and deployment of solutions, ensuring that they are on time, within budget and to the required standard.</p></li><li><p>Work with business teams to gather project requirements, create specifications and develop new solutions or enhance existing applications.</p></li><li><p>Assist the prospecting and tendering.</p></li><li><p>Development of innovative approaches for answering client’s needs.</p></li></ul><p><br></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor Degree of Architecture Engineer.</p></li><li><p>Experience in Aluminum Field from 5 to 7 years.</p></li><li><p>Computer Skills: AutoCAD/Revit/Microsoft Office.</p></li><li><p>Excellent communication skills.</p></li></ul><p><br></p><p></p>

<ul><li><p>Develop and implement the annual maintenance plan (preventive and corrective) for all agricultural equipment and facilities.</p></li><li><p>Set maintenance priorities based on technical analysis and operational needs to ensure optimal performance.</p></li><li><p>Directly supervise maintenance engineers and technicians, and effectively assign daily tasks to ensure timely completion of work.</p></li><li><p>Periodically evaluate the performance of the maintenance team and identify training and development needs to enhance technical efficiency.</p></li><li><p>Monitor equipment breakdowns and address them as quickly as possible to minimize downtime and ensure production continuity.</p></li><li><p>Lead emergency plans and rapid response actions in the event of critical system failures to ensure swift restoration of operations.</p></li><li><p>Ensure the availability of required spare parts by continuously updating inventory records and coordinating with the procurement department.</p></li><li><p>Prepare and monitor the annual maintenance budget, ensuring adherence while maintaining a balance between quality and cost.</p></li><li><p>Submit periodic reports to senior management covering equipment status, maintenance costs, breakdown rates, and recommendations.</p></li><li><p>Implement and monitor occupational health and safety standards, and ensure compliance with environmental and technical regulations in all maintenance operations.</p></li><li><p>Manage contracts and vendors responsible for outsourced maintenance services.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Diploma or Bachelor's degree in Mechanical, Electrical Engineering, or related technical field.</p></li><li><p>From 8 to 12 &nbsp;years of experience in maintenance management..</p></li><li><p>Strong knowledge of farm equipment, electrical systems, water systems, and HVAC.</p></li><li><p>Ability to read technical manuals and blueprints.</p></li><li><p>Strong problem-solving and organizational skills.</p></li><li><p>Proficiency in Computerized Maintenance Management Systems (CMMS) and technical data analysis software.</p></li><li><p>Strong leadership and organizational skills with the ability to make quick and sound decisions.</p></li><li><p>Ability to prepare technical reports and effectively analyze maintenance data.</p></li><li><p>Good knowledge of quality standards, occupational health and safety requirements, and relevant environmental regulations.</p></li></ul><p></p>

<p><strong>Job Summary</strong>: We are seeking a dedicated, entry level Projects Sales Engineer to join our team. The ideal candidate will be responsible for&nbsp;driving revenue by identifying new business opportunities, providing technical consultations, and managing the sales lifecycle of complex engineering projects. You will act as the bridge between the client’s technical requirements and our engineering solutions, ensuring that proposed systems are both technically viable and commercially competitive.</p><p><strong>Key Responsibilities</strong>:</p><ul><li><p>Identify and develop new project opportunities through networking with consultants, contractors, and developers.</p></li><li><p>​Analyze client requirements and blueprints to recommend appropriate technical solutions and product configurations.</p></li><li><p>​Prepare and update product documentation, presentations, and sales tools.</p></li><li><p>Prepare and deliver detailed technical and commercial proposals, including cost estimations, payment requirements, procurements, and compliance statements.</p></li><li><p>​Maintain strong relationships with existing key accounts and influence decision-makers at the design and specification stage.</p></li><li><p>​Collaborate with the installation and design teams to ensure a smooth handoff from "sold" to "execution."</p></li><li><p>​Keep abreast of industry trends, competitor activities, and new technology to maintain a competitive edge&nbsp;</p></li><li><p>Stay informed about relevant legislation and industry standards.</p></li></ul><p><strong>Performance Indicators (KPIs):</strong></p><ul><li><p>​Sales Target Achievement: Meeting or exceeding annual revenue and gross margin targets.</p></li><li><p>​Pipeline Conversion: The ratio of submitted technical proposals to successfully awarded contracts.</p></li><li><p>​Client Acquisition: Number of new consultants or contractors added to the company’s network.</p></li><li><p>​Accuracy: Maintaining high accuracy in cost estimations to prevent project budget overruns.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Qualifications</strong>:</p><ul><li><p>Bachelor's degree in mechanical engineering, preferably major Power.</p></li><li><p>2+ years of experience in technical sales.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent communication and project management skills.</p></li><li><p>Ability to multitask and maintain attention to detail.</p></li></ul><p></p>

<p>Inspect Medjool dates before purchase according to the company s quality standards. Evaluate fruit maturity, size, color, texture, moisture content, and overall appearance. Identify defects including insect damage, disease, fermentation, sunburn, bruising, splitting, dehydration, mold, and mechanical damage. Classify Medjool dates into appropriate quality grades. Determine acceptance, conditional acceptance, or rejection of each lot. Coordinate with the Procurement Team regarding quality decisions before purchase. Prepare detailed inspection reports with photos and supporting documentation. Monitor harvesting, handling, packaging, and transportation practices at supplier farms. Ensure purchased dates maintain traceability from farm to factory. Monitor loading operations to prevent contamination and physical damage. Collect representative samples for laboratory analysis when required. Verify compliance with food safety standards, including GAP and other applicable certifications. Maintain supplier quality performance records and recommend corrective actions. Support supplier development by providing technical feedback to improve product quality. Assist in resolving quality disputes with suppliers. Coordinate with the Transportation and Fleet Management Departments to arrange the transportation of the received products</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in agriculture, Food Science, Horticulture, or a related field. 2 5 years of experience in quality control, preferably in dates, fresh produce, or agricultural exports. Experience with Medjool dates is highly preferred. Strong knowledge of Medjool date quality standards. Understanding of post-harvest handling and storage practices. Knowledge of export quality specifications. Familiarity with food safety systems (HACCP, GlobalG.A.P., ISO 22000 is an advantage). Excellent inspection and reporting skills. Strong analytical and problem-solving abilities. Attention to detail. Effective communication and negotiation skills. Ability to travel frequently to supplier farms. Proficiency in Microsoft Excel and reporting tools.</p>

<p><strong>Role Description</strong></p><p>The Senior PL/FF Design Engineer is responsible for developing high-quality engineering designs, coordinating with multidisciplinary teams, and ensuring compliance with project requirements. Day-to-day tasks include preparing detailed design drawings, performing design calculations, and <strong>utilizing Revit MEP</strong> as a primary tool for project execution. This role involves creating specialized plumbing and firefighting designs for <strong>large-scale projects in KSA</strong>, requiring deep familiarity with both international and Saudi-specific regulations.</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li><p><strong>Design &amp; Engineering Delivery:</strong> Develop plumbing and firefighting system designs, including domestic water supply, drainage, stormwater, and fire protection.</p></li><li><p><strong>KSA Project Execution:</strong> Ensure all designs comply with <strong>SBC (Saudi Building Code)</strong> regulations, as well as <strong>IPC and NFPA</strong> standards.</p></li><li><p><strong>Technical Calculations:</strong> Perform pipe sizing and system layouts using <strong>Elite Fire</strong> and relevant PL/FF design software.</p></li><li><p><strong>BIM Coordination:</strong> Develop and maintain professional-grade <strong>Revit MEP</strong> models to support coordinated project delivery.</p></li><li><p><strong>Shop Drawing Oversight:</strong> Leverage a strong background in shop drawings and contractor scope to ensure designs are practical and constructible.</p></li><li><p><strong>Multidisciplinary Coordination:</strong> Lead technical discussions with discipline leads and stakeholders to maintain project milestones.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong>Qualifications &amp; Requirements</strong></p><ul><li><p><strong>Education:</strong> BSc. in <strong>Mechanical Power Engineering</strong> from a reputable university.</p></li><li><p><strong>Experience:</strong> <strong>8–11 years </strong>of experience in <strong>consulting offices</strong> (specifically graduated between 2015 and 2018).</p></li><li><p><strong>Project History:</strong> Proven track record in the design of <strong>large-scale KSA projects</strong>.</p></li><li><p><strong>Software Proficiency:</strong> * <strong>Revit MEP Professional is a MUST.</strong></p></li><li><p>Expert user of <strong>AutoCAD</strong>, <strong>Elite Fire</strong>, and specialized PL/FF software.</p></li><li><p><strong>Technical Knowledge:</strong> Deep understanding of SBC, NFPA, and IPC codes.</p></li><li><p><strong>Skills:</strong> Strong analytical problem-solving, professional accountability, and very good command of written and spoken English.</p></li></ul><p><br>&nbsp;</p>

<p>We are seeking a detail-oriented <strong>QC/QA Engineer</strong> based in or near 10th of Ramadan City to drive quality management and inspection processes across our project lifecycle. In this role, you will bridge preventive Quality Assurance planning (QMS, PQP, ITP) with detective Quality Control testing (IQC, IPQC, FQC, NDT) to eliminate rework, minimize material waste, and guarantee full compliance with engineering codes and ISO 9001 standards.</p><p><strong>Key Responsibilities</strong></p><ul><li><p>Develop, implement, and maintain Project Quality Plans (PQP) and Inspection &amp; Test Plans (ITP) in compliance with ISO 9001 standards.</p></li><li><p>Execute incoming quality control (IQC) on raw materials, verify heat numbers and Mill Test Reports (MTRs), and monitor proper site/factory storage conditions.</p></li><li><p>Conduct in-process (IPQC) and final (FQC/OQC) inspections to ensure adherence to approved engineering drawings and specifications.</p></li><li><p>Coordinate Non-Destructive Testing (NDT), pressure testing, and manage calibration logs for all inspection, measuring, and test equipment (IMTE).</p></li><li><p>Issue formal Non-Conformance Reports (NCRs), lead Root Cause Analysis (RCA) investigations, and enforce corrective action plans.</p></li><li><p>Conduct supplier and subcontractor quality evaluations (SQE) to verify vendor compliance.</p></li><li><p>Maintain accurate inspection logs, test reports, and quality dossiers for client handover.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p><strong>Education:</strong> Bachelor’s Degree in Mechanical, Electrical or Mechatronics.</p></li><li><p><strong>Experience:</strong> 3 to 7+ years of hands-on QA/QC experience in manufacturing, construction, or heavy engineering projects.</p></li><li><p><strong>Residency:</strong> Resident of 10th of Ramadan City or surrounding areas preferred.</p></li><li><p><strong>Standards &amp; Codes:</strong> Strong working knowledge of international codes (ASME, ASTM, ISO) and risk-based quality thinking.</p></li><li><p><strong>Certifications (Preferred):</strong> ISO 9001 Lead/Internal Auditor, ASQ Certified Quality Engineer (CQE).</p></li><li><p><strong>Core Competencies:</strong> Strong technical documentation, root-cause problem-solving, and diplomatic assertiveness with stop-work authority.</p></li></ul><p></p>

<h2>Job Summary</h2><p>We are looking for an experienced <strong>Electrical Engineer</strong> with strong expertise in <strong>Caterpillar (CAT) heavy equipment</strong> to join our team in <strong>Yemen</strong>. The ideal candidate will have <strong>7–10 years of hands-on experience</strong> in the installation, maintenance, troubleshooting, and repair of electrical systems in Caterpillar machinery. The successful candidate must be willing to relocate to Yemen and work in a challenging field environment.</p><h2>Key Responsibilities</h2><ul><li><p>Perform preventive, corrective, and predictive maintenance on the electrical systems of Caterpillar heavy equipment.</p></li><li><p>Diagnose and repair electrical, electronic, and control system faults using appropriate diagnostic tools.</p></li><li><p>Inspect, test, and maintain electrical wiring, sensors, control modules, alternators, starters, batteries, and other electrical components.</p></li><li><p>Troubleshoot engine management systems, electronic control modules (ECMs), and CAN bus communication issues.</p></li><li><p>Ensure maximum equipment availability by minimizing electrical downtime.</p></li><li><p>Read and interpret electrical schematics, wiring diagrams, and technical manuals.</p></li><li><p>Coordinate with mechanical engineers and technicians to resolve equipment issues efficiently.</p></li><li><p>Prepare maintenance reports and maintain accurate service records.</p></li><li><p>Ensure all work is performed in compliance with safety regulations and company standards.</p></li><li><p>Support equipment commissioning, testing, and operational readiness.</p></li></ul><p></p><p><strong>Requirements</strong></p><h2>Requirements</h2><ul><li><p>Bachelor's degree in <strong>Electrical Engineering</strong>.</p></li><li><p><strong>7–10 years of experience</strong> in electrical maintenance of heavy equipment.</p></li><li><p>Proven hands-on experience with <strong>Caterpillar (CAT) equipment</strong> is mandatory.</p></li><li><p>Strong knowledge of heavy equipment electrical systems, electronic controls, sensors, wiring, alternators, starters, batteries, and engine control systems.</p></li><li><p>Experience using Caterpillar diagnostic software and electrical testing equipment is highly preferred.</p></li><li><p>Ability to read and interpret electrical schematics and technical documentation.</p></li><li><p>Strong analytical, troubleshooting, and problem-solving skills.</p></li><li><p>Excellent communication and teamwork abilities.</p></li><li><p>Willingness to <strong>relocate to Yemen</strong>.</p></li></ul><p></p><h2>Benefits</h2><ul><li><p>Competitive salary package.</p></li><li><p><strong>Accommodation provided.</strong></p></li><li><p><strong>Round-trip flight tickets provided.</strong></p></li></ul><p></p>

<ul><li><p>Develop short- and long-term production plans based on sales forecasts, market needs, and operational inventory.</p></li><li><p>Oversee the wire drawing process (both wet and dry drawing) to reduce wire rod to the required diameters with high dimensional accuracy and tensile strength.</p></li><li><p>Ensure that products (bolts and nuts) conform to technical and standard specifications, continuously working to minimize scrap rates and machine downtime.</p></li><li><p>Supervise the deployment of labor and technicians across various production lines to optimize the plant's production capacity</p></li><li><p>Coordinate with the maintenance department to establish preventive and corrective maintenance schedules for forming and threading machines to ensure operational continuity.</p></li><li><p>Prepare periodic reports (daily, weekly, and monthly) for top management regarding production volume, operational efficiency, and performance rates.</p></li><li><p>Train and develop the skills of technicians and engineers under the department to upgrade their operational competence.</p></li><li><p>Monitor chemical concentrations, bath temperatures, immersion times, and waste treatment systems for all pickling, phosphating, and galvanizing lines to maintain optimal chemical balance and environmental compliance.</p></li><li><p>Train and develop the skills of technicians and engineers under the department to upgrade their operational competence.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Engineering (Production Engineering, Mechanical Engineering, or equivalent).</p></li><li><p>Minimum of <strong>8-15 years</strong> in the same industry, with proven hands-on experience in <strong>Cold and Hot Metal Forming</strong>, specifically in fasteners manufacturing (bolts, nuts, and rivets).</p></li><li><p>Ability to lead teams, guide engineers and technicians, and manage high-capacity production lines efficiently.</p></li><li><p>Proficiency in production planning, equipment maintenance, and reducing waste/downtime using Lean Manufacturing principles.</p></li><li><p>Quick capability to diagnose production line faults and find root-cause solutions.</p></li><li><p>Excellent time management, stress management, and decision-making skills.</p></li><li><p>Residents of Qalyubia Governorate are preferred</p></li></ul><p></p>

<p>Are you ready to engineer excellence and drive innovation in a dynamic manufacturing environment? We're searching for a passionate and experienced <strong>Production Engineer</strong> to join our dedicated team in <strong>Alexandria, Egypt</strong>. This is an incredible opportunity to shape the future of our production processes and contribute to a culture of continuous improvement!</p><ul><li><p><strong>Overview:</strong> As a Production Engineer, you will be at the heart of our operations, ensuring seamless and efficient production flows. You'll leverage your expertise to optimize processes, enhance product quality, and elevate our manufacturing capabilities. This on-site role is perfect for a hands-on professional eager to make a tangible impact.</p></li><li><p><strong>Responsibilities:</strong></p><ul><li><p><strong>Design and implement</strong> robust production processes and systems to maximize efficiency and minimize waste.</p></li><li><p><strong>Oversee and troubleshoot</strong> manufacturing operations, identifying areas for improvement and implementing corrective actions.</p></li><li><p><strong>Collaborate closely</strong> with cross-functional teams, including R&amp;D, Quality Assurance, and Maintenance, to achieve production targets.</p></li><li><p><strong>Develop and maintain</strong> comprehensive technical documentation, including process flows, work instructions, and standard operating procedures.</p></li><li><p><strong>Lead and participate</strong> in continuous improvement initiatives, applying methodologies like Lean Manufacturing to drive operational excellence.</p></li><li><p><strong>Ensure strict adherence</strong> to safety protocols and quality standards throughout the production cycle.</p></li></ul></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p><strong>Experience the Thrill:</strong> Bring <strong>2-3 years of proven experience</strong> in a challenging Production Engineering role within a manufacturing environment.</p></li><li><p><strong>Engineering Excellence:</strong> Possess a solid academic background in <strong>Engineering</strong>, with a strong emphasis on <strong>Mechanical Engineering</strong>.</p></li><li><p><strong>Master of Production:</strong> Demonstrate hands-on expertise in <strong>Manufacturing</strong> and <strong>Production</strong> processes, showcasing your ability to drive operational efficiency.</p></li><li><p><strong>Problem-Solving Pro:</strong> Exhibit exceptional <strong>Problem Solving</strong> and <strong>Process Optimization</strong> skills, with a track record of implementing effective solutions.</p></li><li><p>Age not exceeding 35 years.</p></li><li><p>Proficiency in English.</p></li></ul><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling, and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.</p><br> <p>Could you be the full-time Rolling Stock Preventive Maintenance Supervisor in Cairo we’re looking for?</p><br><p><strong>Your future role</strong></p><br> <p>Take on a new challenge and apply your technical leadership and maintenance expertise in a cutting-edge field. You’ll work alongside a highly skilled, collaborative, and safety-conscious team.</p><br> <p>You'll ensure the optimal performance, safety, reliability, and availability of rolling stock through effective planning, coordination, supervision, and verification of maintenance activities. Day-to-day, you’ll work closely with teams across the business (e.g., Maintenance Technicians, Maintenance Management, and EHS teams), oversee preventive and corrective maintenance activities, and much more.</p><br> <p>You’ll specifically take care of supervising maintenance activities, ensuring compliance with safety and quality standards, and supporting the development of your team, but also drive continuous improvement initiatives to optimize performance and resource utilization.</p><br> <p>We’ll look to you for:</p><br> <ul> <li> <p>Leading and supervising a team of technicians to carry out preventive and corrective maintenance on rolling stock.</p><br> </li> <li> <p>Allocating and coordinating daily maintenance tasks based on operational priorities and available resources.</p><br> </li> <li> <p>Ensuring maintenance activities are completed safely, efficiently, and in compliance with procedures and quality standards.</p><br> </li> <li> <p>Monitoring work progress, addressing delays or constraints, and supporting fault rectification activities.</p><br> </li> <li> <p>Reviewing and verifying maintenance records, work orders, and technical documentation.</p><br> </li> <li> <p>Providing technical guidance, coaching, and on-the-job support to technicians.</p><br> </li> <li> <p>Promoting adherence to EHS requirements, safety practices, and procedural compliance.</p><br> </li> <li> <p>Supporting team development by identifying training needs and mentoring team members.</p><br> </li> </ul> <p><br><strong>All about you</strong></p><br> <p>We value passion and attitude over experience. That’s why we don’t expect you to have every single skill. Instead, we’ve listed some that we think will help you succeed and grow in this role:</p><br> <ul> <li> <p>Diploma or Technical Qualification in Electrical, Mechanical, Electromechanical, Mechatronics, or a relevant maintenance discipline.</p><br> </li> <li> <p>Strong practical experience in rolling stock preventive and corrective maintenance.</p><br> </li> <li> <p>Good understanding of electrical, mechanical, and pneumatic systems, including the ability to read and interpret technical diagrams.</p><br> </li> <li> <p>Experience in troubleshooting and fault diagnosis of rolling stock systems.</p><br> </li> <li> <p>Good IT knowledge and familiarity with computerized maintenance and reporting systems.</p><br> </li> <li> <p>Demonstrated experience in mentoring, coaching, or leading maintenance technicians.</p><br> </li> <li> <p>Strong knowledge of railway and rolling stock maintenance procedures and standards.</p><br> </li> <li> <p>Good command of English, both written and spoken.</p><br> </li> </ul> <p><br><strong>Things you’ll enjoy<br></strong>Join us on a life-long transformative journey – the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. You’ll also:</p><br> <ul> <li> <p>Enjoy stability, challenges, and a long-term career free from boring daily routines.</p><br> </li> <li> <p>Work with cutting-edge safety standards for rail signalling and rolling stock maintenance.</p><br> </li> <li> <p>Collaborate with transverse teams and helpful colleagues.</p><br> </li> <li> <p>Contribute to innovative projects that shape the future of sustainable mobility.</p><br> </li> <li> <p>Utilise our inclusive and flexible working environment.</p><br> </li> <li> <p>Steer your career in whatever direction you choose across functions and countries.</p><br> </li> <li> <p>Benefit from our investment in your development through award-winning learning programs.</p><br> </li> <li> <p>Progress towards senior leadership or specialized technical roles.</p><br> </li> </ul><p>You don’t need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you’ll be proud. If you’re up for the challenge, we’d love to hear from you!</p><br> <p><br><strong>Important to note</strong></p><br> <p>As a global business, we’re an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We’re committed to creating an inclusive workplace for everyone.</p><br> </div>