Production Technician Jobs

Diagnosis and repair of electrical and control faults in distribution panels, protection switches, AC and DC motors, transformers, and UPS power systems. Maintenance and inspection of PLC systems, industrial control units (HMI, I/O modules), and sensor and motor connectors (VFD/AC drives), and programming/adjusting PLC programs when needed (per engineering instructions). Conduct periodic electrical file checks, insulation testing, current and voltage measurements, and earth and system protection tests. Implement and maintain cables, connections, cabling, and cable routing management. Perform preventive maintenance on electric motors, generators, insulation switches, circuit breakers, and control panels. Verify protective settings (relays) and adjust them in coordination with the maintenance engineer to ensure equipment and circuit protection. Record all maintenance work, tests, and measurements in the CMMS and prepare fault reports and root cause analyses. Contribute to projects for installing new machines, integrating control systems, and testing systems before operation (SAT). Monitor spare parts inventory for electrical and control equipment and propose purchase orders when needed. Implement electrical safety procedures and lead safety activities (lockout/tagout, discharge of charges, use of personal protective equipment). Train and guide junior technicians and assist in evaluating the technical team's skills.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Day and evening shifts</li><li>Open to people with disabilities (mobility impairment)</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Conduct daily inspection rounds to monitor compliance with occupational safety and health procedures. Ensure workers properly use personal protective equipment (PPE). Report hazards and non-compliance cases and follow up on corrective actions. Inspect fire protection equipment and ensure its readiness in coordination with competent authorities. Monitor emergency exits and evacuation routes and ensure they are free of obstructions. Participate in investigations of accidents, injuries, and near-miss incidents, and prepare the necessary reports. Implement safety and health awareness and training programs. Monitor contractors’ work and ensure their compliance with safety requirements. Ensure application of safe work procedures during maintenance, welding, and work at heights and in confined spaces. Monitor work permit procedures for dangerous works as needed. Prepare daily and weekly records and reports related to safety activities. Perform any other job-related tasks assigned by the direct manager. <p><strong>Additional details</strong></p><ul><li>Vacancies: 2</li><li>Shift system: mornings only</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Responsibilities: Inspect system components, diagnose and address mechanical or electrical faults. Clean filters, heat exchangers, fans, and refrigerant tubes periodically. Inspect and adjust refrigerant levels and recharge as needed. Replace faulty or defective parts, such as pistons, condensers, or motors. Prepare daily and weekly maintenance reports, documenting executed procedures. Ensure adherence to quality and safety standards while working on sites. Immediate response to emergency fault reports and follow up until issue is resolved. Contribute to improving appliance performance and reducing energy consumption. Requirements: Ability to read technical drawings and diagnose faults using inspection tools. Good knowledge of refrigeration and air conditioning systems of various kinds. Understanding and adherence to occupational safety procedures. Work location: Al-Maadi. Work includes traveling between company branches in Cairo and Giza as operational needs dictate. Work hours and benefits: 5 days a week. 2 days of weekly leave. Health insurance. Social insurance. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance, transport allowance, overtime</li></ul>

Job DescriptionPrepare quotations, technical offers, and pricing documents.Review and organize datasheets, compliance sheets, and project documentation.Prepare and submit technical submittals according to project requirements.Coordinate with Sales, Purchasing, Warehouse, Accounts, and Suppliers to ensure smooth project execution.Follow up on project progress and maintain accurate project records.Update ERP system and maintain project-related documentation.Read and review technical drawings using AutoCAD when required.Support the team in delivering projects on time while ensuring documentation accuracy.Job RequirementsBachelor's degree in any relevant field.0–2 years of experience (Fresh graduates are welcome to apply).Good command of Microsoft Office, especially Excel.Basic knowledge of AutoCAD.Knowledge of DIALux evo is a plus.ERP experience is a plus.Strong organizational and communication skills.Detail-oriented with the ability to work on multiple tasks.Willingness to learn and grow in the lighting industry.Job TypeFull-time.80% office-based.Training provided.Additional Details</descr>

Skills :• Knowledge of heating, ventilation, and air conditioning system.• Electrical and mechanical skills.• Experience in control and heating systems.• Ducts and air flow management.• Ability to lift heavy equipment, climb stairs, and work in tight spaces.• Ability to read technical drawings• Explain repair problems and solutions clearly.• Install new air conditioning, heating, and ventilation systems in residential, commercial, and industrial buildings.• Perform post-installation testing to ensure proper operation.• Conduct routine maintenance checks to keep heating, ventilation, and air conditioning systems running efficiently.• Clean, grease, and replace parts such as filters, blades, and motors.• Inspect ducts, openings, and electrical connections for potential issues.• Diagnose problems related to air conditioning systems, such as refrigerant leaks, electrical faults, or compressor failures.• Repair or replace defective parts, including fans, motors, capacitors, and blades.• Adhere to safety standards.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 5</li><li>Shift system: Morning only</li><li>Benefits: Overtime</li></ul>

Job requirements: - Ability to travel constantly and work in all governorates of Egypt - Ability to work in morning and evening shifts - Experience of at least 5 years in the electrical field - Clear stance on recruitment - No housing for expatriates - Housing provided at sites outside Cairo and Giza - Please send CV to number ***********<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 5</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing</li></ul>

Review structural drawings and shop drawings to ensure compliance with approved designs. Prepare shop drawings and coordinate with different disciplines. Prepare and quantify (BOQ & Quantity Survey) for structural works. Prepare monthly progress reports and monitor works executed. Prepare material requests and follow up on approval. Review and approve drawings submitted by contractors and suppliers. Coordinate with the consultant and contractors to resolve technical issues. Contribute to preparing schedules and track progress rates. Qualifications: Bachelor of Civil Engineering (Construction). 3 to 5 years of experience in the technical office for construction or real estate projects. Good knowledge of technical specifications and building codes. Required software: AutoCAD. SAP- ETAP- SAFE< p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: mornings only</li><li>Benefits: social security, overtime</li></ul>

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring good technical condition. Responsibilities: 1- Monitor the technical condition of production line equipment and adhere to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Conduct preventive maintenance for production lines according to the maintenance schedule throughout the year 4- Review warehouse stock of spare parts (maximum, minimum, and reorder point) and inform the direct supervisor if the spare parts used in maintenance are of poor quality 5- Follow occupational safety and health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange, and clean the workplace 7- Seek opportunities for improvement and development and present ideas to the direct supervisor 8- Work according to the W&M system and ensure accurate calculation and recording of corrective and preventive maintenance times in the SAP PM system Details: 1) Number of vacancies: 1 2) Shift system: morning and evening 3) Benefits: health insurance, social insurance, transportation allowance, meals, overtime

Carrying out preventive and corrective maintenance for all electrical equipment and systems in the slaughterhouse according to the approved maintenance plan. Diagnosing electrical faults and repairing them to ensure quick restart of equipment. Performing maintenance on electrical distribution panels, motors, generators, and lighting systems. Performing wiring, disconnection, and replacement of faulty electrical components. Monitoring the technical condition of electrical equipment and reporting any faults or notes that may affect operation. Contributing to the maintenance of electrical control systems and programmable logic controllers (PLC) under the supervision of the competent engineer. Using electrical measuring instruments to ensure the safety of circuits and electrical components. Collaborating with the mechanical maintenance team during joint maintenance tasks. Keeping tools, maintenance equipment, and the workplace clean. Adhering to occupational safety procedures when dealing with electrical equipment and using personal protective equipment. Recording maintenance work performed and informing the engineer or direct supervisor of the results. Executing any other tasks related to the nature of the job as assigned by the direct manager.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 4</li><li>Shift system: Morning shift only</li><li>Benefits: health insurance, social security, transportation allowance, meals, housing, overtime</li></ul>

Role: - Responsible for maintenance and follow-up of the production line equipment and ensuring their good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adhere to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault on the production lines 3- Perform preventive maintenance for production lines according to the maintenance schedule throughout the year 4- Review spare parts inventory (maximum, minimum, and reorder point) and inform the direct manager if the spare parts used in maintenance work are of poor quality 5- Follow health and safety procedures and food safety within the factory and report any violations 6- Regularly organize, arrange, and clean the workplace 7- Seek improvement and development opportunities and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate recording of corrective and preventive maintenance times in the SAP PM system Additional details - Number of vacancies: 1 - Shifts: morning and evening - Benefits: medical insurance, social insurance, transportation allowance, meals, overtime

Role: - Responsible for maintenance and monitoring of production line equipment and ensuring its good technical condition Responsibilities: 1- Monitor the technical condition of production line equipment and adherence to standardized work steps (SOP) 2- Perform corrective maintenance in case of any electrical fault in production lines 3- Carry out preventive maintenance for production lines according to the maintenance schedule during the year 4- Review warehouse stocks of spare parts (maximum and minimum levels and lead time) and inform the direct manager if the spare parts used in maintenance work are not of good quality 5- Follow occupational safety, health and food safety procedures inside the plant and report any violations 6- Regularly organize, arrange and keep the workplace clean 7- Seek opportunities for improvement and development and present ideas to the direct manager 8- Work according to the W&M system and ensure accurate tracking of corrective and preventive maintenance times and record them in the SAP PM system <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Experience in steam boilers and mineral oil boilers. Job duties: Reading drawings and diagrams and taking or reading measurements to plan procedures for carrying out boiler maintenance. Carrying out scheduled boiler maintenance according to programs prepared by supervisors. Perform preventive maintenance of boilers. Carrying out boiler maintenance tasks assigned to him effectively, selecting the appropriate tools for the job and maintaining them. Prepare lists of suitable spare parts for the work. Commitment to using personal protective equipment at all work sites. Apply occupational health and safety standards in the repair and installation process. Any new tasks within the scope of the job, to be determined by the direct manager according to work requirements and circumstances. Commitment to food safety instructions and good manufacturing practices for the company. Work system: 24-hour shifts. Work location: Sixth of October City - Giza. Experience in steam and mineral oil boilers. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Main duties: -1. Operate various CNC machines. 2. Disassemble and assemble components used in the machines. 3. Periodically ream the nut. 4. Ensure tool safety before use. 5. Preventive maintenance of machines. 6. Monitor oil levels and coolant and their suitability. 7. Daily cleaning of machines and keeping spindle brushes free of chips daily. 8. Arrange tools and maintain order. 9. Adjust operating programs when needed and coordinate with the responsible supervisor. 10. Monitor feed rates and operating speeds and adjust if required. 11. Record the production schedule daily. 12. Ensure pieces are machined properly. 13. Follow safety instructions to avoid harm to the operator, machines, or pieces. 14. Ensure the validity and fit of workholding locations with the programs and immediately resolve any conflicts. 15. Monitor wear of the working tool and replace it immediately when needed. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

<p>Job and Company Overview</p><p>A facility management company is seeking low current technicians for a project in October. Transportation to and from the site is provided.<br>&nbsp;</p><p>Key Responsibilities and Duties</p><ul><li>Maintain low current systems, including fire alarm systems, CCTV systems, access control systems, and audiovisual network systems.</li><li>Read and understand engineering diagrams and technical drawings to ensure work is executed accurately according to specifications and standards.</li><li>Test and commission installed systems to ensure efficiency and safety before handover to the client.</li><li>Identify and resolve technical faults quickly and efficiently, providing detailed reports on issues and proposed solutions.</li><li>Collaborate with engineers and other technicians to ensure the integration of different systems and achieve peak performance.</li><li>Provide technical support and basic training to clients on the use of installed systems.</li><li>Adhere to occupational health and safety standards while performing work at various sites.</li><li>Participate in technical team meetings to review project progress and propose necessary improvements.<br>&nbsp;</li></ul><p>Qualifications and Requirements</p><ul><li>Intermediate qualification.</li><li>At least two years of practical experience in the installation and maintenance of low current systems.</li><li>Good knowledge of fire alarm systems, CCTV, and access control systems.</li><li>Ability to read and understand engineering diagrams and technical drawings.</li><li>Ability to use necessary technical tools and equipment accurately and safely.</li><li>Commitment to occupational safety standards and ability to work in different environments.</li><li>Ability to work within a team and communicate effectively with colleagues and clients.<br>&nbsp;</li></ul><p>Benefits and Perks</p><ul><li>Competitive salary based on experience and qualifications.</li><li>Comprehensive health insurance for the employee.</li><li>Opportunities for training and continuous professional development.</li><li>Performance bonuses based on achievements.</li><li>Supportive work environment and career advancement opportunities.</li><li>Paid annual leave and sick leave.</li><li>Flexible work system according to project requirements.</li></ul>

عقد عمل دوام كامل مرتب مجزي

<p><strong>Job Overview and Company</strong></p><p>Join our team as a Cooling and Air Conditioning Technician where we are committed to delivering high-quality cooling and air conditioning solutions to our customers in the Egyptian market, especially in the Giza or Cairo area.</p><p>We are a leading company in the engineering services and maintenance sector, offering a professional work environment, professional development opportunities, and competitive benefits for committed and permanent employees.</p><p>&nbsp;</p><p><strong>Main Responsibilities and Duties</strong></p><ul><li>Diagnose faults in cooling and air conditioning systems, determine the necessary corrective actions, and perform repairs according to technical standards</li><li>Procure, install, and commission cooling and air conditioning systems according to company specifications and regulatory authorities</li><li>Perform regular preventive maintenance and repair faults in air conditioning units, compressors, condensers, and piping to ensure optimal performance and energy efficiency</li><li>Document all works with precise technical forms and service reports and submit them to supervisors according to approved procedures</li><li>Handle spare parts, estimate maintenance needs, and monitor inventories to ensure required parts are available in a timely manner</li><li>Adhere to occupational health and safety and environmental standards and ensure safety procedures are applied during all fieldwork</li><li>Communicate effectively with customers to ensure their satisfaction and provide the necessary technical advice to maintain equipment</li></ul><p>&nbsp;</p><p><strong>Qualifications and Requirements</strong></p><ul><li>Three-year diploma in Cooling and Air Conditioning or related Mechanical/Electrical Engineering</li><li>Practical experience of 3 to 5 years in cooling and air conditioning, preferably on maintenance and service projects</li><li>Familiarity with low- and medium-pressure cooling systems, understanding of central air conditioning systems and air handling units</li><li>Knowledge of basic electricity and electronics related to cooling and air conditioning systems</li><li>Ability to read schematics, technical drawings, and technical documents</li><li>Ability to work under pressure and flexible hours when needed</li></ul><p>&nbsp;</p><p><strong>Required Skills</strong></p><ul><li>High technical skills in diagnostics and repairs and commitment to quality standards</li><li>Excellent communication with customers, team, and management</li><li>Ability to plan, organize, and manage time effectively</li><li>Principles of occupational safety and adherence to health and safety procedures</li><li>Skill in using measurement tools, inspecting systems, and documenting work</li></ul><p>&nbsp;</p><p><strong>Benefits and Perks</strong></p><ul><li>Competitive salary with performance-based incentives</li><li>Social and health insurance in accordance with approved laws</li><li>Opportunities for professional development and ongoing training within the company</li><li>Professional and supportive work environment with opportunities for promotion within the Engineering department</li></ul>

Tasks: Assembly work for aluminum doors and windows. Conduct installation work on sites (windows – doors – facades). Commitment to quality of execution and working timetables. Conditions: at least 5 years of experience in assembly and installation. Good knowledge of common sections and basics of craftsmanship. Proficiency in using various tools and equipment. Willingness to travel as required by work. Benefits: 8 hours of work + lunch break + overtime. Travel allowance for installations outside Greater Cairo and Giza + meal allowance. Official holidays + regular salaries + advances. Salary is determined by experience. Residence preferred within (Haram – Giza – Marioutiya – Shobra al-Din – Manial) and surrounding areas. In case of expatriates from provinces, housing is provided near the factory on condition of having 5 expatriate technicians. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 15</li><li>Shift system: morning only</li><li>Benefits: health insurance, social insurance, overtime</li></ul>

Tasks: 1. Installation: Installation of tempered glass facades + structural glass + shop facades 2. Interior: Installation of glass doors, office partitions, showers, mirrors, glass shelves 3. Measurement: Take site measurements and prepare glass and accessories 4. Maintenance: Repair and maintenance of old installations 5. Compliance: with quality and safety procedures and handover of the site. We add requirements: - Actual experience in glass and aluminum installations - Able to read drawings and shop drawings - Ability to work at heights and different locations - Integrity, speed, and accuracy in work - Preferable to have a driving license <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning only</li><li>Benefits: Social insurance, transportation allowance</li></ul>

Responsibilities and main tasks Perform preventive and corrective maintenance work for all mechanical equipment and systems within the branch. Conduct regular inspection of entertainment games and mechanical equipment to ensure readiness and safe operation. Diagnose mechanical faults, determine their causes, and take necessary actions to repair them. Perform disassembly, assembly, and replacement of defective parts according to manufacturer instructions. Maintain engines, transmissions, belts, gears, bearings (roller bearings), and other mechanical components. Perform lubrication, cleaning, and periodic calibration of equipment according to maintenance plans. Collaborate with electrical maintenance technicians on joint maintenance work to ensure integrated operation of equipment. Immediate response to emergency faults and work to minimize equipment downtime. Shut down any game or equipment that poses a risk to visitors' safety and report to the supervisor immediately. Ensure the use of the appropriate tools and keep them maintained. Record all maintenance and repair work in approved forms or systems. Prepare reports on recurring faults and propose suitable solutions to prevent recurrence. Monitor spare parts and tools needs and report them before depletion. Maintain cleanliness and order of the maintenance workshop and work sites. Commitment to occupational health and safety procedures and use of personal protective equipment. Adhere to company policies and procedures and operating instructions. Perform any other tasks assigned by the direct supervisor within the job scope. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social security, transportation allowance, overtime</li></ul>

-Requires experience in quantity surveying and preparing progress claims (contractors and owner)