Inspection Engineer Jobs in Egypt

About the job Job Vacancy: QC Technician – Ready-Mix Concrete We are looking for a qualified and experienced QC Technician to join our Ready-Mix Concrete operations.<br>Job Responsibilities Monitor and control the quality of concrete during production at the Ready-Mix Concrete Plant. Conduct the required tests on fresh concrete according to approved specifications and standards. Collect concrete samples from mixers and job sites according to approved procedures. Perform Slump Tests and measure concrete temperature. Prepare, cast, label, and cure concrete cubes for compressive strength testing. Monitor compressive strength test results, maintain records, and report any non-conforming results to the Quality Manager. Monitor the quality of raw materials used in concrete production, including sand, aggregates, cement, water, and admixtures. Ensure that produced concrete complies with the approved mix design. Follow up on concrete deliveries to job sites and ensure compliance with the required specifications. Coordinate with and follow up with concrete mixer truck drivers regarding deliveries and site requirements. Maintain daily inspection and testing records and prepare quality control reports. Identify quality deviations and assist in implementing the necessary corrective actions. Coordinate with the Plant Operator and Production Team to resolve any concrete quality issues. Maintain laboratory equipment and ensure that all testing equipment is available, safe, and in good working condition. Follow all quality, safety, and occupational health procedures at the plant and job sites.<br>Qualifications & Experience Technical Diploma or Industrial Diploma; preferably in Civil Engineering, Concrete, or Building Materials.4 to 10 years of practical experience in concrete quality control. Previous experience in Ready-Mix Concrete Plants is mandatory. Good knowledge and practical experience in testing fresh and hardened concrete. Good experience in conducting Slump Tests and measuring concrete temperature. Good knowledge of concrete sampling, cube casting, labeling, and curing procedures. Basic knowledge of testing sand, aggregates, and other concrete materials. Ability to record test results and prepare quality control reports. Experience in following up on concrete deliveries and coordinating with mixer truck drivers. Good knowledge of applicable concrete specifications and standards. Ability to work shifts and under pressure. Strong commitment to quality and occupational safety procedures.<br>How to Apply Interested candidates are requested to send their updated CV to:islam.youns@gmail.com

<p>Sites International is currently seeking Roads Design Engineer with the following requirements:</p><p>– Years of experience: 1-3</p><p>– Proficient in programs.</p><p>– Previous contribution in urban projects.</p><p>– Familiar with local and international codes and standards.</p><p>– Very good command of English.</p>

<strong>Company Description</strong> Meinhardt Group is a globally recognized engineering consultancy with Asian roots and an Australian heritage, headquartered in Singapore. Over nearly seven decades, the Group has built a reputation for trust, innovation, and engineering excellence, delivering sustainable and highly buildable solutions for complex, commercially successful projects. Meinhardt serves a broad client base, including developers, construction companies, government agencies, multinational corporations, and NGOs, across diverse sectors such as tall buildings, transport infrastructure, water, ports, and power. With a 6,000-strong team in 61 offices worldwide, the company blends global expertise with a personal, client-focused approach, resulting in a high rate of repeat business. Meinhardt aspires to be the world’s preferred infrastructure and urban solutions partner, transforming cities and shaping the future.<br><strong>Role Description</strong> The Senior Structural Engineer will work on-site in Cairo in a full-time capacity, leading the structural design and analysis of building and infrastructure projects. This role involves preparing and reviewing structural calculations, performing detailed structural analyses, and ensuring compliance with relevant codes, standards, and client specifications. The Senior Structural Engineer will coordinate with multidisciplinary teams, oversee CAD-based design documentation, and provide guidance to junior engineers and technicians. Responsibilities include participating in client meetings, supporting project planning and delivery, and contributing to value engineering and sustainable design solutions. The role requires proactive involvement in quality assurance processes and the ability to manage multiple projects and deadlines effectively.<br><strong>Qualifications<br></strong> <ul><li>Strong foundation in Structural Engineering and Civil Engineering, with proven experience in building and infrastructure projects.</li><li>Proficiency in structural Calculations and Structural Analysis, including the use of relevant analysis and design software.</li><li>Competence in Computer-Aided Design (CAD) tools for structural detailing and documentation.</li><li>Bachelor’s degree or higher in Structural Engineering, Civil Engineering, or a closely related discipline.</li><li>Experience in leading project teams, mentoring junior staff, and coordinating with multidisciplinary stakeholders.</li><li>Knowledge of international and regional design codes and standards, with a focus on safety, constructability, and sustainability.</li><li>Strong problem-solving, communication, and report-writing skills, with the ability to present technical information clearly.</li><li>Previous experience with large-scale or complex projects and familiarity with Middle East or North African markets is advantageous.</li></ul>

<strong><em>QStaffers</em></strong><strong> </strong><em>is currently looking for a </em><strong><em>Cost Control Engineer </em></strong><em>for one of our partners, a well-known real estate company. <br><br></em><strong>THE ROLE<br><br></strong>The Cost Control Engineer monitors, controls and optimises project costs for a global real estate developer, making sure projects are delivered within approved budgets. The role combines cost control with tendering and estimation, and turns project financial data into clear Excel and Power BI dashboards that help leadership see performance and risk early and make better decisions.<br><br><strong>What You’ll Do<br><br></strong><ul><li>Monitor and control project costs against approved budgets</li><li>Prepare regular cost reports, forecasts and variance analysis</li><li>Take part in preparing and evaluating tenders, including cost estimation and pricing</li><li>Build and maintain interactive dashboards in Excel and Power BI</li><li>Track progress and spend against baseline schedules and budgets</li><li>Review invoices, variations and claims for accuracy and compliance</li><li>Forecast project cash flow so Finance can secure funding on the right dates</li><li>Build and maintain a historical cost database to sharpen future feasibility studies</li><li>Give project teams practical cost insights and recommendations</li><li>Work closely with planning, procurement and finance<br><br></li></ul><strong>What We’re Looking For<br><br></strong><ul><li>Bachelor’s degree in Engineering, Construction Management or a related field</li><li>2 to 4 years of experience in cost control and tendering or cost estimation</li><li>Advanced Excel skills, including complex formulas, PivotTables and dashboards</li><li>Hands on experience building reports and visuals in Power BI</li><li>Solid understanding of project controls and cost management techniques</li><li>Familiarity with ERP systems such as Oracle or SAP is a plus</li><li>Strong analytical, problem solving and communication skills<br><br></li></ul><strong>YOU’LL THRIVE HERE IF YOU<br><br></strong><ul><li>Like numbers to tell a clear story, not just sit in a spreadsheet</li><li>Spot a cost variance early and raise it before it becomes a problem</li><li>Are comfortable challenging a contractor’s claim with facts</li><li>Take ownership of your work and hold yourself to high standards</li><li>Work well across teams and adapt quickly when priorities shift<br><br></li></ul><strong>WHY THIS ROLE<br><br></strong>You’ll work on large scale real estate projects with a global developer, building both your cost control and tendering skills while your dashboards directly shape how projects are managed. It’s a role with real visibility and a clear path to grow in project controls.

<p><strong><em>QStaffers </em></strong><em>is currently looking for a </em><strong><em>Cost Control Engineer </em></strong><em>for one of our partners, a well-known real estate company. </em></p><p><br></p><p><br></p><p><strong>THE ROLE</strong></p><p>The Cost Control Engineer monitors, controls and optimises project costs for a global real estate developer, making sure projects are delivered within approved budgets. The role combines cost control with tendering and estimation, and turns project financial data into clear Excel and Power BI dashboards that help leadership see performance and risk early and make better decisions.</p><p><br></p><p><br></p><p><strong>WHAT YOU’LL DO</strong></p><ul><li>Monitor and control project costs against approved budgets</li><li>Prepare regular cost reports, forecasts and variance analysis</li><li>Take part in preparing and evaluating tenders, including cost estimation and pricing</li><li>Build and maintain interactive dashboards in Excel and Power BI</li><li>Track progress and spend against baseline schedules and budgets</li><li>Review invoices, variations and claims for accuracy and compliance</li><li>Forecast project cash flow so Finance can secure funding on the right dates</li><li>Build and maintain a historical cost database to sharpen future feasibility studies</li><li>Give project teams practical cost insights and recommendations</li><li>Work closely with planning, procurement and finance</li></ul><p><br></p><p><br></p><p><strong>WHAT WE’RE LOOKING FOR</strong></p><ul><li>Bachelor’s degree in Engineering, Construction Management or a related field</li><li>2 to 4 years of experience in cost control and tendering or cost estimation</li><li>Advanced Excel skills, including complex formulas, PivotTables and dashboards</li><li>Hands on experience building reports and visuals in Power BI</li><li>Solid understanding of project controls and cost management techniques</li><li>Familiarity with ERP systems such as Oracle or SAP is a plus</li><li>Strong analytical, problem solving and communication skills</li></ul><p><br></p><p><br></p><p><strong>YOU’LL THRIVE HERE IF YOU</strong></p><ul><li>Like numbers to tell a clear story, not just sit in a spreadsheet</li><li>Spot a cost variance early and raise it before it becomes a problem</li><li>Are comfortable challenging a contractor’s claim with facts</li><li>Take ownership of your work and hold yourself to high standards</li><li>Work well across teams and adapt quickly when priorities shift</li></ul><p><br></p><p><br></p><p><strong>WHY THIS ROLE</strong></p><p>You’ll work on large scale real estate projects with a global developer, building both your cost control and tendering skills while your dashboards directly shape how projects are managed. It’s a role with real visibility and a clear path to grow in project controls.</p>

We’re looking for a Senior Software Engineer - Frontend to join <strong>Procore’s UXP -Tools Experience (TXI)</strong>. In this role, you’ll join our highly collaborative User Experience Platform organization to drive the technical direction of our projects.<br><br>As a Senior Software Engineer - Frontend, you'll partner with the rest of UXP teams to design, build and ship software using your analytic and engineering skills to provide solutions adopted by Procore Engineering teams. Use your <strong>frontend engineering expertise, AI-assisted development skills, and platform-oriented, modular thinking</strong> to <strong>build reusable, scalable solutions that Procore Engineering teams can adopt across multiple product domains</strong>. Join a team shaping the shared platform behind every Procore product—<strong>apply today</strong>.<br><br>This position reports to the <strong>Manager, Software Engineering</strong> and will work from <strong>Cairo, Egypt</strong>. We're looking for someone to join us immediately.<br><br><strong>What you'll do:<br><br></strong><ul><li>AI is central to how we work — you will be expected not only to use AI tools, but to actively design, build, and integrate AI-powered features and agentic workflows into our products.</li><li>Design and build frontend components and platform solutions that scale across multiple product domains.</li><li>Leverage AI-assisted tools to automate repetitive engineering tasks and increase delivery speed.</li><li>Architect modular, reusable code that reduces duplication across Procore's product tools.</li><li>Collaborate with engineers on other teams to align on shared platform requirements and integration points.</li><li>Translate platform-wide technical decisions into practical frontend implementations.</li><li>Review code and provide technical feedback to raise the quality bar across the team.</li><li>Troubleshoot and resolve frontend issues affecting adopting teams.</li><li>Communicate technical trade-offs clearly to both engineering and cross-functional partners.<br><br></li></ul><strong>What we’re looking for:<br><br></strong><ul><li>Bachelor's degree in Computer Science, Software Engineering, or a related field (or equivalent practical experience).</li><li>5+ years of professional software engineering experience, with a focus on frontend development.</li><li>Strong hands-on experience with React, TypeScript, and JavaScript in production environments.</li><li>Demonstrated experience incorporating AI tools into the development workflow to improve speed and quality.</li><li>Strong communicator who collaborates effectively across teams and comfortably navigates ambiguity.</li><li>Strong experience documenting and bringing team clarity to complex solutions</li><li>Familiarity with Untitled UI and Tailwind CSS is a plus.</li></ul>

<strong>Company Description</strong><p><strong>Perkel Design &amp; Engineering (PERKEL)</strong> is a BIM and digital engineering consultancy that supports owners, consultants, contractors, and public-sector organizations in delivering smarter, better-coordinated projects. Founded in 2019, PERKEL combines construction expertise with practical digital solutions across the full project lifecycle. The team provides services such as BIM modeling and coordination, clash detection, 4D simulation, as-built documentation, 3D laser scanning, Scan-to-BIM, data management, and visualization. By focusing on accurate information, clear coordination, and a quality-driven approach, PERKEL helps project teams reduce risk, improve collaboration, and make confident decisions from design through handover.</p><strong>Role Description</strong><p>The <strong>Senior Electrical BIM Engineer</strong> is a full-time, on-site role based in Cairo. This role is responsible for developing and managing electrical BIM models, coordinating with multidisciplinary teams, and ensuring that designs are accurate, clash-free, and aligned with project standards. The engineer will produce and review construction drawings, perform model-based clash detection, and support the integration of electrical systems within MEP and architectural frameworks. Daily tasks include collaborating with project managers and engineers, maintaining BIM documentation, supporting design reviews, and contributing to continuous improvement of BIM processes and standards.</p><strong>Qualifications &amp; Requirements</strong><ul><li><strong>Education &amp; Experience:</strong></li><li>Bachelor’s degree in Electrical Engineering.</li><li><strong>5 to 7 years of relevant experience</strong> (Graduation Years: <strong>2019 – 2021</strong>).</li><li><strong>BIM &amp; Technical Expertise:</strong></li><li>Strong proficiency in Building Information Modeling (BIM) tools and workflows, including model creation, coordination, and clash detection.</li><li>Proficiency in relevant software such as <strong>Revit, Navisworks, AutoCAD</strong>, and related coordination tools.</li><li>Ability to produce, review, and update detailed electrical construction drawings and related documentation.</li><li>Strong understanding of Architecture and Civil Engineering concepts to ensure integrated and coordinated project models.</li><li><strong>Coordination &amp; Digital Engineering:</strong></li><li>Hands-on experience working within Mechanical, Electrical, and Plumbing (MEP) environments, coordinating electrical systems with other disciplines.</li><li>Experience in digital engineering, 3D modeling, and data management is a strong advantage.</li><li><strong>Competencies &amp; Skills:</strong></li><li>Strong analytical skills, attention to detail, and ability to interpret technical standards and codes.</li><li>Effective communication and collaboration skills, with the ability to work seamlessly in multidisciplinary project teams.</li></ul><strong>Location &amp; Work Type</strong><ul><li><strong>Type:</strong> Full-time (On-site)</li><li><strong>Location:</strong> Cairo, Egypt</li></ul><p><br></p>

The Architecture Site Engineer is responsible for the overall management, maintenance, and continuous improvement of building facilities, ensuring they remain safe, efficient, and compliant with architectural and operational standards. The role oversees facility inspections, preventive and corrective maintenance, space planning, refurbishment and capital improvement projects, contractor management, budget control, and asset lifecycle planning.<br><br>The Architecture Site Engineer is also responsible for maintaining accurate facility records, responding to facility-related issues and emergencies, and working closely with internal stakeholders to deliver effective workplace solutions that support business operations while ensuring compliance with all relevant health, safety, and quality standards.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Conduct regular facility inspections and audits, identifying and resolving structural or design-related issues.</li><li>Manage facility budgets, prepare cost estimates, and oversee procurement for maintenance and improvement projects.</li><li>Coordinate with contractors, vendors, consultants, and architects on renovation, refurbishment, and capital improvement projects.</li><li>Oversee the day-to-day operation, maintenance, and safety of building facilities.</li><li>Plan and coordinate space utilisation, layout changes, and interior fit-out projects in line with architectural standards.</li><li>Manage preventive maintenance programmes and asset lifecycle planning for building systems and infrastructure.</li><li>Maintain accurate facility documentation, including as-built drawings and maintenance records.</li><li>Respond to facility emergencies (e.g. structural issues, electrical faults, water damage) and coordinate corrective actions.</li><li>Liaise with internal stakeholders, including HR, IT, and Operations, to manage space requirements and facility-related requests.<br><br></li></ul><strong>Skills, Knowledge And Experience<br><br></strong><ul><li>Bachelor's degree in Architecture.</li><li>3–5 years of experience in Facilities Management, preferably within commercial, residential, or mixed-use developments.</li><li>Proficiency in AutoCAD, Microsoft Office Suite, and project management tools (e.g. MS Project and Excel).</li><li>Strong project management, contractor, and vendor coordination skills.</li><li>Excellent problem-solving skills, with the ability to work effectively under pressure, particularly during facility emergencies.</li><li>Strong verbal and written communication skills, with the ability to collaborate effectively with cross-functional stakeholders.<br><br></li></ul>Over 42,000 people work for us in more than 700 offices all over the world. This breadth of global coverage, combined with specialist services and market insight, means we'll always have an expert who is local to you.

<strong>Company Description</strong> FETRA INTEGRITY Egypt &amp; Project Management specializes in human capital consulting, project management services, and business development solutions designed to enhance organizational performance. The company delivers tailored HR strategies, including recruitment, organization design, competency modeling, and job evaluation to align resources with business goals. FETRA INTEGRITY also supports clients with performance management, succession planning, total reward management, and training needs analysis. Additional services include payroll management, social and medical insurance administration, outsourcing solutions, and career counseling, all focused on building safe, efficient, and high-performing workplaces.<br><strong>Role Description</strong> The Senior Mechanical Technical Office Engineer is a full-time, on-site role based in New Cairo. This position is responsible for preparing and reviewing mechanical designs, drawings, and technical documentation for projects, ensuring compliance with standards and client specifications. The engineer coordinates with project managers, site teams, and suppliers to clarify technical requirements, support procurement, and resolve mechanical issues. Day-to-day tasks include analyzing mechanical systems, preparing material take-offs and cost estimates, reviewing shop drawings and submittals, and providing technical support during installation and commissioning. The role also involves contributing to quality assurance processes, supporting preventive maintenance planning, and participating in project progress reviews and reporting.<br><strong>Qualifications<br></strong> <br><ul><li>Candidates should possess strong skills in Equipment Maintenance and Maintenance to support mechanical systems across projects.</li><li>Candidates should possess solid capabilities in Preventive Maintenance to help plan and implement maintenance schedules that minimize downtime.</li><li>Candidates should possess practical experience in Troubleshooting to diagnose and resolve mechanical issues efficiently.</li><li>Candidates should possess hands-on expertise in Maintenance &amp; Repair to carry out or oversee corrective actions on mechanical equipment.</li><li>Bachelor’s degree in Mechanical Engineering or a closely related discipline.</li><li>Several years of experience in technical office or mechanical engineering roles, preferably in construction, industrial, or project-based environments.</li><li>Strong knowledge of mechanical systems, standards, and codes, with proficiency in relevant engineering software (e.g., AutoCAD or similar tools).</li><li>Demonstrated ability to read and interpret technical drawings, specifications, and contracts, with strong analytical and documentation skills.</li><li>Effective communication and collaboration skills, with the ability to work with multidisciplinary teams and manage multiple tasks under deadlines.</li><li>Commitment to safety, quality, and continuous improvement in mechanical and project management practices.</li></ul>

<strong>Company Description</strong> Yalla Edara is a leading HR consultancy and talent management firm that helps organizations design, build, and scale their HR functions with sustainable impact. The company provides end-to-end HR solutions, including recruitment, organizational development, performance management, job design, HR policies, and complete HR department setup. With international expertise across diverse markets, Yalla Edara has a proven track record in multi-sector recruitment and HR consulting. The firm follows a tailored, client-centric approach, ensuring solutions align with each company’s unique needs while leveraging a strong talent network. At Yalla Edara, people are viewed as the engine of business growth, and the company focuses on unlocking their potential through innovative HR strategies.<br><strong>Role Description</strong> The Senior Technical Office Engineer (Architect) is a full-time, on-site role based in Alexandria, Egypt. This role is responsible for preparing, reviewing, and coordinating architectural shop drawings, ensuring compliance with design specifications and project standards. The Senior Technical Office Engineer collaborates with civil and electrical engineering teams, site engineers, and project managers to resolve technical issues and align design documents with actual site conditions. Daily tasks include participating in quantity surveying activities, supporting BOQ preparation and verification, and providing technical guidance to junior engineers and drafting staff. The role also involves maintaining documentation, following project timelines, and contributing to quality control and adherence to local building codes and regulations.<br><strong>Qualifications<br></strong> <ul><li>Ability to prepare, review, and coordinate Shop Drawings with architectural, structural, and MEP disciplines.</li><li>Experience in BOQ preparation, verification, and coordination with procurement and cost control teams.</li><li>Knowledge of Civil Engineering concepts related to building structures and site coordination.</li><li>Understanding of Electrical Engineering requirements to ensure proper integration in architectural designs.</li><li>Proficiency in Quantity Surveying, including measurement, cost estimation, and validation of completed works.</li><li>Bachelor’s degree in Architecture or a closely related engineering discipline.</li><li>Strong proficiency in CAD and BIM software (e.g., AutoCAD, Revit) and MS Office tools.</li><li>Solid knowledge of local building codes, standards, and construction practices in Egypt.</li><li>Proven experience in technical office or design coordination roles, preferably in large-scale or complex projects.</li><li>Excellent communication, problem-solving, and coordination skills, with the ability to work collaboratively with multidisciplinary teams.</li></ul>

<strong>Company Description</strong> FETRA INTEGRITY Egypt &amp; Project Management is a human capital consulting and business development company focused on enhancing organizational performance through tailored HR strategies. The company provides end-to-end services including recruitment, organization design and restructuring, job analysis and descriptions, competency modeling, and total reward management. Its solutions cover job evaluation and grading, pay strategy and structures, salary surveys and adjustments, performance management, succession planning, and HR learning and development. FETRA INTEGRITY also manages social and medical insurance, monthly payroll, outsourcing, career counseling, and safety-related training, helping client organizations achieve optimal efficiency and sustainable growth.<br><strong>Role Description</strong> The Senior Technical Office Architecture Engineer is a full-time, on-site role based in New Cairo. The role involves preparing, reviewing, and coordinating architectural shop drawings, ensuring alignment with design intent, codes, and project specifications. The engineer will coordinate with civil and electrical engineering teams, validate quantities and BOQs, and support quantity surveying activities to ensure accurate cost estimates and material take-offs. Daily responsibilities include resolving technical issues with site teams, participating in project meetings, updating technical documentation, and supporting project managers with reports and progress tracking. The role also requires close collaboration with clients, consultants, and contractors to maintain quality standards and project timelines.<br><strong>Qualifications<br></strong> <br><ul><li>Strong architectural technical office skills, including preparation and review of shop drawings and coordination with design teams.</li><li>Experience working alongside Civil Engineering teams to integrate structural and architectural requirements.</li><li>Ability to coordinate with Electrical Engineering teams to ensure architectural layouts support MEP systems.</li><li>Proficiency in Quantity Surveying and BOQ preparation, including accurate quantity take-offs and cost estimates.</li><li>Bachelor’s degree in Architecture or a related engineering discipline.</li><li>Proficiency in relevant design and drafting software (e.g., AutoCAD, Revit, and other BIM tools).</li><li>Solid knowledge of local building codes, construction standards, and project management practices.</li><li>Strong analytical, problem-solving, and documentation skills, with attention to detail and accuracy.</li><li>Ability to work on-site in New Cairo, collaborate effectively with multidisciplinary teams, and manage multiple tasks under deadlines.</li><li>Previous experience in senior technical office or similar architectural engineering roles within Egypt is highly beneficial.</li></ul>

<p>Jadeer Engineering &amp; Construction is hiring a Mechanical Technical Office Engineer to join our Technical Office (Mechanical/MEP) at our New Cairo HQ, with project-site coordination.</p><p><br></p><p><strong>About the Role</strong></p><p>Support project delivery from the technical office as a generalist across mechanical systems: HVAC, firefighting, and plumbing &amp; drainage. You will prepare shop drawings and coordination drawings from IFC design documents, resolve multi-disciplinary clashes, and keep technical documentation and submittal logs accurate so site execution is never delayed by paperwork. Reports to: Senior Technical Office Engineer / MEP Manager.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p><br></p><p><strong>Shop Drawings &amp; Technical Documentation</strong></p><ul><li>Prepare mechanical shop drawings and combined-services coordination drawings in AutoCAD from IFC design documents across HVAC, firefighting, and plumbing/drainage.</li><li>Draft RFIs for design conflicts or missing information; incorporate consultant comments and manage revision control.</li><li>Maintain drawing registers and submittal logs with proper document control.</li></ul><p><strong>Design Support &amp; Coordination</strong></p><ul><li>Review and process material submittals and technical datasheets against project specifications.</li><li>Coordinate with civil, architectural, and electrical technical office counterparts to resolve clashes before drawings are issued to site.</li><li>Provide basic design verification support (duct/pipe routing, equipment room and shaft layouts) across the full mechanical scope.</li></ul><p><strong>Quantities &amp; Site Support</strong></p><ul><li>Prepare quantity take-offs for mechanical works to support procurement and cost control.</li><li>Support preparation of as-built drawings and project closeout documentation.</li><li>Respond to site execution queries with timely technical clarifications and confirm material need dates.</li></ul><p><br></p><p><strong>Qualifications</strong></p><ul><li>B.Sc. in Mechanical Engineering (Power); Engineers Syndicate membership.</li><li>5–7 years of mechanical technical office experience as a generalist across HVAC, firefighting, and plumbing/drainage on building projects.</li><li>The most recent 3+ years must be with a contractor (MEP or general contractor) on live projects. Consultant-only or design-office-only profiles will not be considered.</li><li>Strong, hands-on shop-drawing and coordination-drawing skills; able to work independently across multiple mechanical systems.</li><li>Good English and organized documentation habits.</li></ul><p><br></p><p><strong>Technical Skills</strong></p><ul><li>AutoCAD Mechanical (expert level); Revit MEP is a plus</li><li>Multi-disciplinary clash coordination and combined-services drawings</li><li>Basic HVAC / firefighting / plumbing design verification; quantity take-off</li><li>MS Office reporting and document control</li></ul><p><br></p><p><strong>Our Values</strong></p><p>Clarity · Innovation · Strong Foundations · Community · Trust &amp; Longevity</p><p><br></p><p>Location: New Cairo, Egypt (On-site, Full-time)</p>

<p><strong>Company Description</strong> Crystal Holding is an Egyptian company based in Cairo, established in 2019 as Crystal ADC and specializing in interior architecture with bespoke, luxurious designs and over 15 completed projects. In 2021, the group expanded with four sister companies: Woodsolutions by Crystal in New Cairo’s industrial area for customized woodwork and furniture, Crystal Investments for real estate brokerage and consultancy, Crystal Pools for swimming pool construction, and Crystal Automation for smart home solutions. Together, these companies provide integrated services that support clients from property purchase through to key handover. Crystal Holding offers a collaborative environment where engineering, design, and technical teams work closely to deliver high-quality residential and commercial projects. Team members join a growing organization with opportunities to contribute to distinctive, high-end developments.</p><p><strong>Role Description</strong> The Technical Office Engineer is a full-time, on-site role based in New Cairo. This position is responsible for preparing and reviewing shop drawings, coordinating with design and site teams to ensure technical accuracy and compliance with project specifications. The role includes developing and updating Bills of Quantities (BOQs), performing quantity take-offs, and supporting cost estimation and budgeting processes. The Technical Office Engineer will collaborate with civil and electrical engineering disciplines to resolve technical issues, maintain documentation, and ensure timely submission of drawings and reports. Daily tasks also involve liaising with project managers, suppliers, and contractors, tracking project progress, and contributing to quality assurance and continuous improvement within the technical office.</p><p><strong>Qualifications</strong></p><ul><li>Candidates should possess strong skills in Shop Drawings preparation and coordination.</li><li>Candidates should possess solid experience in BOQ development, quantity take-offs, and Quantity Surveying.</li><li>Candidates should possess a sound background in Architecture Engineering for interior design and architectural coordination.</li><li>Candidates should possess knowledge of Electrical Engineering and plumping fundamentals for MEP-related drawings and reviews.</li><li>Bachelor’s degree in Architectural Engineering, Architecture, or a related engineering field.</li><li>Proficiency in CAD software (e.g., AutoCAD) and familiarity with relevant design and engineering tools.</li><li>Strong analytical, problem-solving, and attention-to-detail skills with the ability to interpret technical specifications.</li><li>Effective communication skills and the ability to work collaboratively with multidisciplinary teams on-site.</li><li>Previous experience in interior architecture, construction, or technical office work is preferred.</li></ul>

<p>I am looking for an experienced <strong>Biomedical / MedTech Engineer in the Greater Cairo region</strong> for a role combining technical expertise with commercial development.</p><p><br></p><p><strong>Senior Biomedical / MedTech Engineer</strong></p><p><strong>Technical &amp; Commercial Development</strong></p><p><br></p><p><strong>This is not a purely technical service position.</strong></p><p><br></p><p><strong>I am looking for someone with strong experience in the medical-device sector and, importantly, solid hands-on experience with surgical endoscopy systems and related OR applications</strong>.</p><p><br></p><p><strong>The role will include:</strong></p><p><br></p><p>• Product demonstrations and technical presentations</p><p>• Customer visits and relationship development</p><p>• Follow-up of commercial opportunities</p><p>• Coordination of installations, training and after-sales activities</p><p>• Support for hospital projects and tenders</p><p>• Communication with international manufacturers and suppliers</p><p><br></p><p><strong>What I am looking for:</strong></p><p><br></p><p><strong>• Degree in Biomedical Engineering or a related field</strong></p><p><strong>• Minimum 5 years of relevant MedTech experience. The role is equally relevant for more senior professionals with extensive industry experience and a strong technical, customer-facing or commercial track record</strong></p><p><strong>• Strong practical experience in surgical endoscopy. Experience in one or more related application areas such as laparoscopy, arthroscopy, urology, gynecology or MIS is highly relevant</strong></p><p><strong>• Experience working directly with surgeons, OR teams and hospital biomedical departments; technical or application support inside the operating room during procedures is a strong advantage</strong></p><p><strong>• Strong customer-facing skills, with experience in demonstrations, applications, sales, projects, tenders or after-sales support</strong></p><p><strong>• Strong Arabic and English, with the ability to work independently and take responsibility</strong></p><p><strong>• A driving licence and the ability to travel independently by car across the Greater Cairo region is an advantage</strong></p><p><br></p><p><strong>I am particularly interested in someone who can move comfortably between technical discussions in the OR, customer relationships and commercial opportunities</strong>.</p><p><br></p><p>The role will focus primarily on <strong>surgical endoscopy</strong>, while also supporting additional MedTech product areas as the portfolio develops.</p><p><br></p><p>The role covers the <strong>Greater Cairo region</strong>, with regular customer visits across Cairo and surrounding areas and exposure to international MedTech manufacturers and products.</p><p><br></p><p>If this sounds like a good fit, please send me your CV through LinkedIn or by email to:</p><p>amer.alneser [AT] g-teq.de</p><p><br></p><p>If someone in your network may be suitable, I would appreciate you sharing this with them.</p><p><br></p><p>#MedTech #SurgicalEndoscopy #Laparoscopy #Arthroscopy #Urology #Gynecology #MIS #MedicalDevices #Cairo #Egypt #Hiring</p>

<strong>Job Summary<br><br></strong>The Maintenance Supervisor is responsible for supervising the daily maintenance operations of the hotel, ensuring that all facilities, equipment, and building systems are operating safely and efficiently. The role leads the maintenance team, coordinates preventive and corrective maintenance, and responds promptly to operational issues to maintain high hotel standards and guest satisfaction.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Supervise and coordinate the daily activities of the maintenance and engineering team.</li><li>Ensure the proper operation and maintenance of hotel facilities, equipment, and systems.</li><li>Carry out regular inspections of guest rooms, public areas, back-of-house areas, and technical facilities.</li><li>Coordinate preventive and corrective maintenance activities.</li><li>Respond promptly to maintenance requests and technical emergencies.</li><li>Assign daily tasks to technicians and monitor completion and quality of work.</li><li>Ensure electrical, plumbing, HVAC, mechanical, and other building systems are maintained properly.</li><li>Maintain accurate records of maintenance activities, repairs, inspections, and equipment performance.</li><li>Monitor the condition of tools, equipment, and spare parts and report replenishment requirements.</li><li>Coordinate with external contractors and service providers when required.</li><li>Ensure compliance with health, safety, fire, and environmental regulations.</li><li>Support energy and utility-saving initiatives throughout the hotel.</li><li>Identify recurring technical problems and recommend appropriate corrective actions.</li><li>Assist the Chief Engineer with maintenance planning, budgeting, and projects.</li><li>Ensure all maintenance work is completed with minimum disruption to hotel operations and guests.</li><li>Train, guide, and motivate maintenance team members.</li><li>Respond to guest and department requests professionally and within established response times.</li><li>Perform other duties assigned by the Chief Engineer or hotel management.<br><br></li></ul><strong>Requirements<br><br></strong><ul><li>Technical diploma or degree in Mechanical, Electrical, HVAC, or a related engineering field.</li><li>Minimum 3–5 years of maintenance experience, preferably in a hotel or hospitality environment.</li><li>Previous supervisory experience is preferred.</li><li>Strong knowledge of electrical, plumbing, HVAC, mechanical, and general building maintenance.</li><li>Good understanding of preventive maintenance programs.</li><li>Knowledge of health and safety and fire safety requirements.</li><li>Strong troubleshooting and problem-solving skills.</li><li>Good leadership and team management abilities.</li><li>Ability to work under pressure and respond to emergencies.</li><li>Flexible to work shifts, weekends, and public holidays when required.</li><li>Good communication skills and basic computer knowledge.</li><li>Hotel experience is highly preferred.</li></ul>

<p><strong><u>Main job duties and responsibilities:</u></strong></p><ol><li>Assist in the preparation and review of tender documents, including technical specifications, drawings, and schedules, to ensure alignment with client requirements and company capabilities.</li><li>Conduct site visits and assessments to gather information and data necessary for tender submissions, including site conditions, equipment specifications, and resource requirements.</li><li>Collaborate with internal stakeholders, including operations, procurement, and finance, to develop cost estimates, pricing strategies, and tender proposals.</li><li>Assist in the analysis of tender requirements, risks, and opportunities, and contribute technical insights and recommendations to enhance competitiveness.</li><li>Prepare and organize tender documentation, ensuring accuracy, completeness, and compliance with tendering guidelines and procedures.</li><li>Support the coordination and communication with subcontractors, suppliers, and partners to obtain quotes, specifications, and other information required for tender submissions.</li><li>Assist in the preparation of presentations, reports, and other materials for internal and external stakeholders to support tendering activities and decision-making.</li><li>Maintain and update tendering databases, records, and documentation to track tender progress, outcomes, and lessons learned.</li><li>Stay informed about industry trends, best practices, and emerging technologies related to facility management and tendering processes.</li><li>Contribute to continuous improvement initiatives by providing feedback, suggestions, and lessons learned from tendering experiences.</li><li>Perform any additional tasks that might be necessary for easier workflow, within the main frame of the job’s specialty.</li></ol><p><br></p><p><strong><u>Job requirements:</u></strong></p><p><strong><u>Educational background and previous experience:</u></strong></p><ol><li>Bachelor’s degree in engineering (preferably Mechanical, Electrical, or Civil Engineering) or a related field.</li><li>1-3 years of experience in facility management, engineering, or a related field, with exposure to tendering processes and practices (Engineer)</li><li>4-6 years of experience in facility management, engineering, or a related field, with exposure to tendering processes and practices (Senior Engineer)</li></ol><p><strong><u>Knowledge and Functional Skills:</u></strong></p><ol><li>Strong technical knowledge and understanding of facility management principles, equipment, and systems, with a Civil / MEP background recommended.</li><li>Experience working in a technical office environment is preferred.</li><li>Excellent analytical, problem-solving, and decision-making skills.</li><li>Proficiency in Microsoft Office applications, particularly Excel, Word, and PowerPoint.</li><li>Excellent communication and interpersonal skills, with the ability to work effectively in a team environment.</li><li>Attention to detail and ability to manage multiple tasks and deadlines effectively.</li><li>Fluency in both written and spoken English and Arabic.</li></ol><p><br></p><p><br></p>

<p><strong>Company Description</strong> </p><p>KORRA (Consukorra Co.) is an Egyptian Joint Stock Company established in 1997, operating under two main umbrellas: KORRA Energi and KORRA Agri. The organization delivers integrated, customized engineering solutions in Egypt, with more than 20 years of experience in electromechanical contracting, energy solutions, and industrial trading. KORRA is one of the few companies in Egypt licensed to generate, distribute, and sell electricity and is classified as a first-class contractor by the Egyptian Federation for Construction &amp; Building Contracts. In addition to energy, the company is active in agriculture export for strawberries, pesticides, fertilizers, water pumps, and refractory materials for cement and steel factories. Team members join a diverse, engineering-focused environment that supports large-scale industrial and infrastructure projects.</p><p><strong>Role Description</strong> </p><p>The <strong>Sr. Architecture Technical Office Engineer is a full-time, on-site role based in Giza,</strong> responsible for supporting the design, coordination, and technical documentation of architectural works across KORRA’s projects. This role includes preparing and reviewing architectural drawings, shop drawings, and technical submittals, ensuring compliance with project specifications, codes, and standards. The engineer will coordinate with project managers, site teams, and other disciplines to resolve design issues, support integration between architectural and electromechanical systems, and provide technical guidance during execution. Daily tasks also involve conducting design reviews, participating in value engineering activities, updating as-built documentation, and supporting tender and procurement processes with accurate technical data. The role requires proactive communication with internal and external stakeholders to maintain project timelines, quality, and safety standards.</p><p><strong>Qualifications</strong></p><ul><li><strong>5 - 7 Years Experience</strong> in <strong>Architecture with experience in technical office work for construction</strong> or industrial projects.</li><li>Proficiency in Architectural Design, including creating and reviewing detailed drawings, shop drawings, and layouts.</li><li>Effective Communication skills for collaborating with multidisciplinary teams, contractors, and consultants.</li><li>Bachelor’s degree in <strong>Architecture Engineering</strong>; advanced certifications in architectural design or project coordination are an advantage.</li><li>Proficiency in relevant design and CAD/BIM software (e.g., AutoCAD, Revit, or equivalent) and strong technical documentation skills.</li><li>Knowledge of local building codes, standards, and construction practices in Egypt, especially for industrial and energy-related projects.</li><li>Demonstrated ability to work on-site, manage multiple tasks, and support project deadlines with attention to detail and quality.</li></ul>

<p><strong>Company Description</strong> Sherif El Gohary &amp; Co. is a leading contracting and construction company with more than 40 years of experience delivering high-quality projects. The company is known for strong technical expertise and a commitment to meeting and exceeding client expectations. Its portfolio spans diverse construction projects that emphasize reliability, safety, and timely completion. Team members join a collaborative environment focused on professional growth and continuous improvement in construction practices.</p><p><strong>Role Description</strong> This is a full-time, on-site Tendering &amp; Procurement Engineer role based in Giza. The role involves reviewing and analyzing tender documents, preparing technical and commercial proposals, and coordinating with internal teams to ensure accurate and competitive bids. The Tendering &amp; Procurement Engineer will source and evaluate suppliers, request and compare quotations, negotiate prices and terms, and prepare purchase orders in line with project requirements. Daily tasks include maintaining tender and procurement records, tracking material delivery schedules, ensuring compliance with company policies and project specifications, and supporting project teams with cost and material information. The role also requires regular communication with vendors, consultants, and project stakeholders to ensure smooth tendering and procurement processes.</p><strong><p>Qualifications</p></strong><p> </p><ul><li>Strong tendering and estimating skills, including the ability to analyze drawings, specifications, and bills of quantities, and prepare accurate technical and commercial offers.</li><li>Proficiency in procurement and supply chain activities such as supplier sourcing, vendor evaluation, price negotiation, and purchase order management.</li><li>Solid understanding of construction and contracting practices, project execution workflows, and materials used in building and infrastructure projects.</li><li>Ability to use relevant software tools (e.g., MS Office, Excel, procurement or ERP systems, and basic estimation tools) to manage tenders and procurement data.</li><li>Strong analytical, numerical, and problem-solving skills, with attention to detail and the ability to work with tight deadlines.</li><li>Effective communication and negotiation abilities, with capacity to coordinate across engineering, finance, and site teams and maintain professional vendor relationships.</li><li>Bachelor’s degree in Engineering (Civil, Mechanical, or related field) or an equivalent technical discipline; prior experience in tendering and procurement within construction is highly desirable.</li><li>Commitment to ethical procurement practices, adherence to company policies, and continuous learning about market trends, new materials, and cost-saving opportunities.</li></ul>

<p><strong><em><u>Egypt – Senior Backend Engineer</u></em></strong></p><p><strong><em><u>CAIRO /INFORMATION TECHNOLOGY /FULL-TIME/ ON-SITE</u></em></strong></p><p><strong><em><u>JOB SUMMARY / PURPOSE</u></em></strong></p><p><br></p><p><strong>Who We Are</strong></p><p><br></p><p>Boubyan Digital Factory is the digital arm for Boubyan in Egypt</p><p><br></p><p>BB2 Digital and Technology Services Ltd (t/a Nomo Fintech) is a cloud-based business-to-business Fintech company which owns the digital platform that powers the digital retail banking services of Bank of London and The Middle East plc (“BLME”), branded Nomo (available on iOS and Android), and provides various other services to BLME.</p><p><br></p><p>Nomo Fintech is currently in scale-up mode to support international digital banking across the GCC, and it’s an incredibly exciting time to join the business with great ambition and an effective combination of talent, culture, and world class technology.</p><p><br></p><p><strong>What you will be doing?</strong></p><ul><li>Evaluate product requirements for operational feasibility and create detailed specifications &amp; tech designs based on user stories.</li><li>Contribute to design/code reviews for quality assurance.</li><li>Hands-on participation in development and bug fixing.</li><li>Monitor and report technical execution progress as well as all technical issues, risk or mitigation plan in a timely manner.</li><li>Taking up critical POCs and feasibility studies.</li><li>Drive technical innovations in the product constantly to remain ahead of the curve.</li></ul><p><br></p><p><strong> Who you are?</strong></p><ul><li>Have a pragmatic approach to problem solving and solution architecture and an keen eye for simplicity</li><li>Have attention to detail when developing solutions</li><li>Have the ability to break down and communicate complex problems in simple terms</li><li>Have worked in medium to large teams for over 6+ years commercial experience as a software engineer/developer</li><li>Have experience with Typescript, Node.js and modern JavaScript</li><li>Have designed and implemented REST APIs and understand GraphQL very well</li><li>Have experience with serverless technologies, microservice architectures</li><li>Have experience with at least one major cloud provider (AWS, Google Cloud, Azure)</li><li>Have extensive experience with various levels of testing e.g. unit, integration, end-to-end</li></ul><p><br></p><p><strong>Bonus skills</strong></p><ul><li>Understanding and experience with golang</li><li>Experience designing, developing, and running production-grade systems at medium scale and above (50k+ users)</li><li>The ability to work across the fullstack (React-Native)</li><li>Experience with AWS / Good understanding of AWS services - EC2, S3, Route 53, DynamoDB, Cloud Front, Lambda, SNS, SQS, API gateway, ELB, EBS</li><li>Experience in the finance/payments domain</li></ul>

<p><span>We're Hiring | </span><strong>Senior Sales Engineer – Industrial Automation</strong><span> (Field Sales, Cairo)</span></p><p><span>Electric Technology is an authorized distributor of leading international brands: </span><strong>Siemens, Phoenix Contact, Rittal, Turck, Banner, SensoPart, and Werma. </strong></p><p><span>We supply industrial automation and electrical solutions to factories across Egypt.</span></p><p><span>We're looking for a </span><strong>Senior Sales Engineer</strong><span> to own and grow key industrial accounts in Cairo and surrounding industrial zones. This role suits someone who already has a strong network of factories and decision-makers and wants world-class brands and full team support behind them.</span></p><p><strong>&nbsp;</strong></p><p><strong>What You'll Own</strong></p><p><span>-&nbsp;Manage and grow a portfolio of factories, OEMs, panel builders, and end users in your territory.</span></p><p><span>-Build long-term relationships with plant managers, maintenance heads, engineering teams, and procurement.</span></p><p><span>-&nbsp;Win new accounts and turn inquiries into repeat business.</span></p><p><span>-&nbsp;Understand customers' technical needs and propose complete solutions across our brand portfolio (automation, connectivity, enclosures, sensors, signaling).</span></p><p><span>-&nbsp;Lead quotations, negotiations, and deal closing, with follow-through to delivery and after-sales support.</span></p><p><span>-&nbsp;Hit and exceed annual sales targets, and help shape the sales strategy for your region.</span></p><p><span>-&nbsp;Share market intelligence on competitors, pricing, and new project opportunities.</span></p><p><strong>&nbsp;</strong></p><p><strong>What We're Looking For</strong></p><p><span>-&nbsp;B.Sc. in Electrical, Mechatronics, or Power Engineering.</span></p><p><span>-&nbsp;5+ years of B2B field sales experience in industrial automation or electrical products.</span></p><p><span>-&nbsp;An established network of industrial customers in Greater Cairo (10th of Ramadan, Obour, 6th of October, etc.)</span></p><p><span>-&nbsp;A proven track record of meeting or exceeding sales targets.</span></p><p><span>-&nbsp;Solid technical knowledge of PLCs, drives, control panels, sensors, and industrial components.</span></p><p><span>-&nbsp;Strong negotiation and presentation skills; confident with senior decision-makers.</span></p><p><span>-&nbsp;Good English (written and spoken).</span></p><p><span>-&nbsp;Valid driving license.</span></p><p><strong>&nbsp;</strong></p><p><strong>What We Offer</strong></p><p><span>-&nbsp;Competitive salary + attractive </span><strong>uncapped</strong><span> commission / </span><strong>incentive</strong><span> scheme on achieved targets.</span></p><p><span>-&nbsp;Car / transportation </span><strong>allowances.</strong></p><p><span>-&nbsp;</span><strong>Medical</strong><span> insurance + </span><strong>social</strong><span> insurance.</span></p><p><span>-&nbsp;Technical and sales </span><strong>training</strong><span> on international brands.</span></p><p><span>-&nbsp;Clear </span><strong>growth</strong><span> path toward Key Account or Sales Team Leadership roles.</span></p><p><span>-&nbsp;A stable company with a strong </span><strong>market reputation.</strong></p><p><br></p><p>#Hiring #WeAreHiring #ProjectSalesEngineer #SalesEngineer #ElectricalEngineering #ProjectSales #LVPanels #ElectricalIndustry #AlexandriaJobs #JobsInAlexandria #SalesJobs #EngineeringJobs #EgyptJobs</p>