Heavy equipment mechanical engineer Jobs

Immediately required is a car inspection engineer for the following tasks: - Thoroughly inspect the car when it moves and returns from operating movements. - Approve damage report estimation and prepare a report if necessary. - Comprehensive review of the car before moving it to the client for delivery, ensuring there are no problems when it leaves, and to raise reports about that immediately. - Test cars as a person responsible for the efficiency and performance of all cars according to the applicable system. - Follow up and update the corking (sketching) and photography system with precision. - Match cars with the corky. - Re-evaluate damages after the representative and approve them. - Receiving temporary cars that have entered for the first time, test them, photograph them, and create an entry corky. - Receiving cars returned from repairs and maintenance and writing a report on the condition of these cars after completing those repairs and adjusting the corky. - Monitoring the relevant departments to complete as soon as possible solving any problem related to any car that hinders its operation whether maintenance, repair, cleanliness, licensing, etc. - Immediately inform management of any negligence by the concerned departments in this regard. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: day and evening</li><li>Driver’s license: Private</li><li>Benefits: Health insurance, social insurance, overtime</li></ul>

A mechanical technician specializing in cheese-making machines to work at one of the food manufacturing companies. Requirements:· Previous experience in mechanical maintenance.· Previous experience in maintenance and operation of cheese-making machines for applicants majoring in cheese-making machines.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

Mechanical technician with experience in water circulation pumps, submersible pumps, diesel generators, and hot water boilers. Prior experience in hotels, clubs, and shopping malls preferred. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Open to people with disabilities (mobility impairment)</li><li>Benefits: health insurance, social security, transportation allowance, meals, overtime</li></ul>

Company Description Abu Elkher Distribution, founded in 1999, is a specialized distributor in printers, inks, computer accessories, point of sale systems, security systems, and networking solutions. The company focuses on strategic expansion and building a strong presence across global markets. Abu Elkher Distribution has formed key alliances with leading technology and printing brands such as HP, Canon, Epson, Brother, ASUS, Intel, AMD, MSI, GIGABYTE, ACER, AOC, DELL, and CORSAIR. These partnerships enable the company to offer high-quality, reliable products and technical solutions. Team members join a dynamic environment that values technical expertise, customer service, and long-term growth.<br>Role Description The Maintenance Engineer (Printers) is a full-time, on-site role based in Heliopolis. This role is responsible for diagnosing, maintaining, and repairing various types of printers and related equipment, ensuring minimal downtime and optimal performance. Daily tasks include performing preventive maintenance, troubleshooting electrical and mechanical faults, and replacing or repairing components as needed. The engineer will document service activities, maintain accurate maintenance records, and support the technical team with installation and configuration of new printing devices. The role also involves coordinating with customers and internal departments to resolve technical issues, adhere to safety standards, and contribute to continuous improvement of maintenance processes.<br>Qualifications<br> <br>Candidates should possess strong skills in Equipment Maintenance and Maintenance & Repair for printers and related devices. Candidates should possess solid Maintenance Engineering skills, including diagnostics, troubleshooting, and technical problem-solving. Candidates should possess experience in Preventive Maintenance, including scheduled inspections, servicing, and performance checks. Candidates should possess Electrical Maintenance skills relevant to printers and peripheral equipment. Relevant technical diploma or bachelor’s degree in Engineering, Electronics, Mechatronics, or a related field. Experience in printer maintenance for brands such as HP, Canon, Epson, or similar is highly beneficial. Ability to read technical manuals, schematics, and apply safety procedures in maintenance work. Strong attention to detail, time management, and ability to work effectively on-site with customers and internal teams.

A Mechanical Technician required with experience of at least 3 years, age not more than 30 years. Employment at a large industrial company in El-Atfash (El-Askary? Actually Ad: العاشر من رمضان). Working hours: 8 hours. Health insurance, social insurance, meals, and transport to and from the company. Basic salary + attendance incentives + production incentives. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance, transport allowance, meals, housing, overtime</li></ul>

<p><strong>Estimation and Tendering Engineer Required</strong></p><ul><li>Study the tender documents, specifications, and engineering drawings for projects and bids.</li><li>Review work items and quantities and ensure they comply with the drawings and specifications.</li><li>Prepare an accurate quantity takeoff for all project items.</li><li>Prepare cost analysis for items and determine the actual cost of each item.</li><li>Collect and review prices for raw materials, equipment, and labor required to execute the work.</li><li>Calculate equipment operating costs, including fuel, maintenance, depreciation, and productivity.</li><li>Prepare pricing for excavation, backfilling, replacement, layering, asphalt, concrete, and other works according to the nature of the project.</li><li>Study price quotations from suppliers and subcontractors and compare them.</li><li>Prepare and update pricing schedules and BOQs according to market prices.</li><li>Calculate direct and indirect project costs.</li><li>Determine the ratios for administrative expenses, risks, overheads, and profit margins.</li><li>Prepare the estimated cost and initial budget for the project.</li><li>Review prices before submitting the bid and ensure there are no calculation errors.</li></ul><p>&nbsp;</p><p>&nbsp;</p>

Responsibilities and main tasks Perform preventive and corrective maintenance work for all mechanical equipment and systems within the branch. Conduct regular inspection of entertainment games and mechanical equipment to ensure readiness and safe operation. Diagnose mechanical faults, determine their causes, and take necessary actions to repair them. Perform disassembly, assembly, and replacement of defective parts according to manufacturer instructions. Maintain engines, transmissions, belts, gears, bearings (roller bearings), and other mechanical components. Perform lubrication, cleaning, and periodic calibration of equipment according to maintenance plans. Collaborate with electrical maintenance technicians on joint maintenance work to ensure integrated operation of equipment. Immediate response to emergency faults and work to minimize equipment downtime. Shut down any game or equipment that poses a risk to visitors' safety and report to the supervisor immediately. Ensure the use of the appropriate tools and keep them maintained. Record all maintenance and repair work in approved forms or systems. Prepare reports on recurring faults and propose suitable solutions to prevent recurrence. Monitor spare parts and tools needs and report them before depletion. Maintain cleanliness and order of the maintenance workshop and work sites. Commitment to occupational health and safety procedures and use of personal protective equipment. Adhere to company policies and procedures and operating instructions. Perform any other tasks assigned by the direct supervisor within the job scope. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social security, transportation allowance, overtime</li></ul>

Electro-Mechanical Technician (PLC & Automation Technician) Requirements:- 2 to 4 years of experience in electrical and control fault maintenance.- Practical experience in: PLC. Servo Drives. Servo Motors. Control and measurement circuits. Troubleshooting faults. Fault analysis and repair as quickly as possible. Experience in maintenance and operation of production equipment in factories, preferably in: Glass forming machines (IS Machines). Furnace. Batch House. Conveyors and raw material handling equipment. Equipment for hot end area. - Preference for those with prior experience in glass packaging factories. <strong>Additional details</strong> <ul> <li>Number of vacancies: 1</li> <li>Shift system: Morning shifts only</li> <li>Benefits: Medical insurance, social security, transportation allowance, meals, housing, overtime</li> </ul>

مهندس مبيعات متخصص في مجال الطلمبات و محاسب

<p>Company and Job Overview</p><p>We are a company specializing in the supply and installation of elevators. We believe in innovating high-efficiency and suitable design solutions to meet customers' needs. We are looking for a Mechanical Design Engineer to join the team in Qalyubia Governorate, responsible for developing and designing elevator components and mechanical parts according to project requirements and approved engineering standards.</p><p>Main Responsibilities</p><ul><li>Design</li><li>Prepare detailed drawings, bill of quantities, and document technical specifications for materials and assemblies.</li><li>Analyze dimensions and verify compliance with engineering specifications, coordinating with mechanical engineering, production, and testing teams.</li><li>Conduct performance tests, analyze results, and provide recommendations for improvement and modification.</li><li>Review and align designs with quality, accreditation, and technical documentation requirements for projects.</li><li>Manage design changes and update technical documents according to change control procedures.</li><li>Assist in preparing technical proposals and estimates and provide technical support for projects and clients.</li></ul><p>Qualifications and Requirements</p><ul><li>Bachelor's degree in Mechanical Engineering or equivalent.</li><li>1 to 2 years of experience in the sheet metal field.</li><li>Proficiency in design software such as SolidWorks, AutoCAD; additional knowledge of analytical programs (e.g., FEA) is desirable as needed.</li><li>Ability to read and interpret engineering drawings and technical documents and technical controls.</li><li>Proficiency in editing equations.</li></ul><p>Needed Skills</p><ul><li>Strong design skills, analytical thinking, and attention to detail.</li><li>Ability to work in a team and coordinate effectively with different departments, production, and procurement.</li><li>Time management and ability to work under pressure, following tasks from start to finish.</li><li>Continuous learning and ability to propose innovative and effective design solutions.</li></ul><p>Benefits</p><ul><li>Competitive salaries with potential increases.</li><li>Opportunities for professional development and internal/external training as needed.</li><li>Professional work environment that encourages innovation and teamwork spirit.</li></ul><p>Work from the factory premises near Dairli Mostorad roundabout</p>

Equipment and Agricultural Machinery Maintenance Technician<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning shifts only</li><li>Benefits: social security, transportation allowance, meals, housing, overtime</li></ul>

Role:- Responsible for the maintenance and monitoring of production line equipment and ensuring its good technical condition. Responsibilities: 1- Monitor the technical condition of production line equipment and comply with the standardized work steps (SOP). 2- Perform corrective maintenance in case of any mechanical fault in production lines. 3- Carry out preventive maintenance for production lines according to the maintenance schedule throughout the year. 4- Review spare parts stock levels (maximum, minimum, and reorder point) and inform the direct manager if the spare parts used in maintenance works are of poor quality. 5- Follow occupational safety, health and food safety procedures inside the factory and report any violations. 6- Search for various improvement and development opportunities and present ideas to the direct manager. Skills: 1. At least two years of experience, preferably in food factories. 2. A secondary qualification of industrial diploma specializing in (mechanical maintenance) or higher. 3. Ability to work in a team. 4. Communication skills.<p><strong>Additional details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, overtime</li></ul>

Perform various tasks to install, troubleshoot, repair, and maintain production equipment and site facilities according to preventive, predictive, and production maintenance systems and procedures to ensure the site's business objectives are met. Participate in budget project execution for assigned tasks. Supervise external contractors in all types of maintenance activities. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: morning and evening</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, overtime</li></ul>

A Civil Technical Office Engineer at a company specializing in design and implementation of swimming pools and water features (3 years of experience in a technical office). Salary: top salary according to experience. Social security and medical insurance available. Job overview: A company specializing in the design and implementation of swimming pools. As we expand our projects and increase the team, a Technical Office Engineer is required to prepare execution drawings, quantity surveying, and follow up on project technical documents. Tasks and responsibilities: - Prepare and audit execution drawings (Shop Drawings) for swimming pools and their systems (architectural - structural - mechanical - electrical) - Prepare BOQ and assist in technical pricing - Review plans from consultant/ client and ensure they match execution - Prepare As-Built Drawings after completion of execution - Coordinate between design team and on-site execution team - Follow up on material submittals and technical approvals - Prepare and update project schedules - Archive and organize technical documents for each project Requirements: - Bachelor of Civil Engineering - At least 3 years of experience in technical offices - Full proficiency in AutoCAD (Revit preferred) - Knowledge of quantities surveying and BOQ preparation - Proficient in Microsoft Office (especially Excel) - Primavera Additional details: - Number of vacancies: 1 - Shift system: Morning only - Benefits: Health insurance, social security, meals, housing, overtime

<p><strong>Job Summary</strong></p><p>The electrical engineer is responsible for the full supervision of electrical works and drawings on site</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li>Study of drawings: review design drawings (Issued for Construction - IFC) and participate in preparing drawings</li><li>On-site supervision: follow up on the implementation of electrical works on site daily, ensuring they meet industry standards and specifications</li><li>Materials management: inspect electrical materials supplied to the site (cables, panels, transformers, luminaires) and ensure their approval</li><li>Engineering coordination: continuous coordination with civil, architectural, and mechanical engineers to prevent conflicts in routes</li><li>Reporting: prepare periodic reports (daily/weekly/monthly) on progress, work obstacles, and submit them to the project manager</li><li>Quantities takeoff: accurately calculate actual quantities implemented on site to prepare subcontractor claims and claims submitted to the owner</li><li>Testing and commissioning: supervise initial commissioning and testing of electrical systems before final handover to the consultant and owner</li><li>Final drawings preparation: supervise the preparation of as-built drawings as implemented on site and deliver them within project closeout documents</li></ul><p>&nbsp;</p><p><strong>Requirements & Qualifications</strong></p><ul><li>Education: Bachelor's degree in Electrical Engineering (Power and Machines) from a recognized university</li><li>Experience: practical experience of 3 to 5 years on a project site</li><li>Engineering software: proficiency in AutoCAD, Dialux for lighting calculations, and project management and calculations software</li><li>Code knowledge: thorough knowledge of local and international electrical codes (e.g., Egyptian, Gulf codes, or IEC/NEC)</li><li>Soft skills: strong leadership, ability to manage workforce and subcontractors, work under pressure, and quickly resolve field problems</li></ul><p>&nbsp;</p><p><strong>Working Conditions</strong></p><ul><li>Work location: field work distributed between the construction site and the project's technical office</li><li>Nature of work: full-time, may require evening shifts or extra hours to meet deadlines for critical projects</li></ul>

Production Scheduling: Track the production schedule based on the harvesting plan and priority matrix issued by the Planning Department, and allocate work across production lines. Resource Availability: Ensure the timely availability of raw materials and necessary production tools to enable smooth operation without downtime. Workforce Management: Organize shift schedules and manage daily work rosters. Supervision & Leadership: Direct, supervise, and issue daily instructions and assignments to supervisors. Equipment Oversight: Monitor machinery, oversee equipment operations, and fine-tune technical settings for each product. Downtime Minimization: Respond rapidly to equipment breakdowns in coordination with the Maintenance Department to minimize downtime. Supply Chain Tracking: Monitor daily harvest progress and incoming farm deliveries. Efficiency & Waste Reduction: Track waste percentages and improve overall manufacturing efficiency. Reporting: Prepare daily operational and performance reports <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 1</li><li>Shift system: Morning only</li><li>Benefits: health insurance, social insurance, transportation allowance, meals, housing, overtime</li></ul>

Part of the duties/responsibilities: - Supervise and perform preventive and corrective maintenance for all electrical systems within the facility (lighting, power distribution, panels, transformers, etc.). - Troubleshoot and repair electrical faults to ensure minimal downtime and uninterrupted operations. - Inspect electrical installations regularly to ensure compliance with safety standards and regulations. - Monitor the performance of electrical equipment and plan upgrades or replacements when needed. - Coordinate with contractors and suppliers for electrical maintenance works and ensure quality standards are met. - Maintain and update maintenance logs, inspection reports, and equipment documentation. - Support energy-saving initiatives by monitoring consumption and recommending improvement actions. - Ensure proper functioning and maintenance of backup power systems (generators, UPS, etc.). - Assist in planning and executing facility projects involving electrical systems (renovations, expansions, etc.). - Respond promptly to electrical emergencies and provide technical support to other facility teams. - Ensure all maintenance activities follow company policies, safety procedures, and local electrical codes. <p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 1</li><li>نظام الورديات: صباحية فقط</li><li>المزايا: تأمين صحي، تأمين اجتماعي، ساعات إضافية</li></ul>

مطلوب للتعين ,فنين ميكانيكا انتاج فى اكتوبر مصنع بلاستيك بروفيشنال شغل 8 ساعات جمعه وسبت اجازه كارت رعايا ليك ولاسرتكيشترط السن لحد 37تأمين صحى واجتماعى مرتبات مجزيا للتواصل 01041435646 واتس ............................................................................................

A civil engineer with 2 to 5 years of experience is required to work as an on-site engineer for a ready-mix concrete company as a fittings engineer / production engineer. Perform the required work as fittings or production at sites, also manage the workforce and handle all operations and labor matters. Coordinate with management to execute the work in light of work policies. Ability to complete implementation according to the timelines. Salary to be determined after interview. <p><strong>Additional details</strong></p><ul><li>Number of vacancies: 1</li><li>Shifts: Morning only</li><li>Benefits: Social insurance, transportation allowance, housing, overtime</li></ul>

<p><strong>Required Aluminum Engineer (Remote)</strong></p><p>Our company announces the need for a <strong>Aluminum Engineer</strong> to work <strong>remotely</strong> with flexible hours or per project basis.</p><p><strong>Job duties:</strong></p><ul><li>Prepare execution drawings (Shop Drawings).</li><li>Prepare quantity takeoffs (BOQ).</li><li>Pricing and preparing price quotations.</li><li>Work on the <strong>Ra-Workshop</strong> program for preparing and designing aluminum works.</li><li>Review drawings and coordinate with the implementation team.</li></ul><p><strong>Requirements:</strong></p><ul><li>Experience of at least 3 years in aluminum and façades.</li><li>Proficiency in using <strong>Ra-Workshop</strong> professionally.</li><li>Proficiency in <strong>AutoCAD</strong>, and familiarity with <strong>Revit</strong> is preferred.</li><li>Experience in door and window systems and glass façades.</li><li>Ability to work remotely and meet deadlines.</li><li>Preferably attach samples of previous works.</li></ul><p><strong>Job type:</strong></p><ul><li>Remote.</li><li>Flexible hours or per project basis.</li><li>Financial compensation is determined according to experience and efficiency.</li></ul><p><strong>To apply:</strong><br>Please send your CV with samples of previous works, clarifying experience with <strong>Ra-Workshop</strong> and <strong>AutoCAD</strong>, and indicating years of experience in the aluminum field.</p>