Fire Fighting EngineerJobs

Location: Alexandria, Egypt<br>Work Model: Hybrid, approximately 70 to 80 percent on-site and 20 to 30 percent remote<br>Employment Type: Full-time<br>Experience Level: Junior to Senior<br> <br>About the Role:<br>We are a high-potential technology startup building advanced embedded systems for robotics, motion control, sensing, autonomy, and intelligent hardware products. We are hiring a Firmware / Embedded Systems Engineer to develop real-time firmware for microcontroller-based systems using platforms such as STM32 Arm Cortex-M and TI C2000 real-time control MCUs. This role is open to highly motivated junior engineers, mid-level engineers, and senior engineers who hold a bachelor’s degree and/or master’s degree in Computer Engineering, Computer Science, Electronics Engineering, Electrical Engineering, Mechatronics Engineering, or a related field. Applicants do not need to be experts in all technical domains. However, every applicant must demonstrate proven experience, serious project work, or strong potential in at least one of the following domains: 1. Motion Control: FOC algorithm on BLDC/PMSM and servo drives. 2. Navigation and Localization: INS / AHRS. 3. Imaging and Sensing Firmware. We are looking for people who understand startup work: high ownership, fast learning, technical intensity, and the opportunity to grow with the company.<br>Main Responsibilities:<br>The selected candidate will contribute to:Developing firmware for STM32, TI C2000, or similar real-time MCU platforms. Writing low-level drivers for sensors, actuators, encoders, and communication interfaces. Implementing real-time control loops or sensor acquisition pipelines. Writing firmware for motion-control, navigation, localization, imaging, and sensing firmware. Debugging hardware and firmware issues in the lab. Supporting PCB bring-up. Creating calibration and diagnostic routines. Writing test procedures and validation reports. Documenting firmware architecture and APIs. Participating in code reviews. Supporting prototype testing, integration, and product validation.<br>Required Firmware Skills and Expertise:<br>Applicants should have practical knowledge and experience or strong foundations in embedded firmware development, including several of the following:<br>C programming for embedded systems. C++ knowledge is preferred. Bare-metal and/or RTOS-based development. Interrupt-driven and timer-driven firmware design. Firmware state machines. Error handling, watchdogs, diagnostics, and fault recovery. Timers, advanced PWM and interrupts. Sensors / Data Acquisition, ADC and DAC. Communication Protocols such as: UART, SPI, QSPI, I2C, CAN/CAN FD, Ethernet, Ether CAT, USB and and display/sensor control interfaces. Reading datasheets, reference manuals, schematics, and hardware design notes. Debugging using oscilloscopes, logic analyzers, JTAG/SWD debuggers, serial logs, multimeters, and lab power supplies. Git-based development workflow. Python for testing, automation, plotting, or data analysis is a plus.<br>Application Requirements:Applicants should submit the following to careers@invictusumv.com:Updated CV. Short summary of the domain track they best match: (Motion Control / Navigation and Localization / Imaging and Sensing) Evidence of proven experience or serious project work. Availability to work from Alexandria, Egypt. Expected salary. Earliest possible start date. Git Hub/Git Lab, technical portfolio, videos, reports, or project documentation.

Company Description SUMMITS PMC is an Engineering Consultancy firm located in Giza, Egypt. Our team of Architects and Engineers focuses on delivering sustainable projects that meet client requirements and integrate Modern Methods of Construction (MMC) technologies. We prioritize high-quality design solutions that optimize construction, operational, and maintenance costs, offering services ranging from feasibility studies to construction documentation and quality control.<br>Role Description This is a full-time on-site role for a Mid-Level BIM Architectural Engineer at SUMMITS PMC located in El Dokki, Giza. The BIM Architectural Engineer will be responsible for developing and coordinating architectural BIM models, supporting multidisciplinary design coordination, and ensuring the delivery of high-quality and sustainable BIM outputs across project stages. The role involves collaboration with architectural, structural, and MEP teams to ensure design consistency, compliance with project requirements, and adherence to BIM standards and workflows.<br>Develop and maintain architectural BIM models using Autodesk Revit (LOD 300–400). Produce accurate architectural models, drawings, schedules, and documentation from BIM models. Prepare detailed architectural shop drawings from BIM models for construction and coordination purposes. Coordinate architectural models with structural and MEP disciplines to ensure design consistency and project requirements. Perform clash detection and assist in model coordination using Autodesk Navisworks. Collaborate with multidisciplinary teams and follow BIM Execution Plans (BEP). Apply company BIM standards, workflows, and project requirements throughout project development. Review architectural drawings and specifications to identify conflicts, missing information, and coordination issues. Participate in model reviews and quality control processes to ensure model accuracy and compliance. Support the development and updating of BIM models throughout design and construction stages. Prepare organized architectural drawing packages for different project phases. Assist in ensuring compliance with project requirements, company standards, and applicable codes and regulations. Work with BIM collaboration platforms such as BIM 360 and Autodesk Construction Cloud (ACC). Contribute to project coordination meetings and support the resolution of design and coordination issues. Coordinate effectively with multidisciplinary project teams to resolve design, modeling, and construction-related conflicts. Maintain model integrity, accuracy, and documentation throughout the project lifecycle.<br>Qualifications:Bachelor's degree in Architecture or a related field.4–5 years of experience in Architectural BIM Modeling, Shop Drawings, and BIM Coordination. Strong proficiency in Autodesk Revit for architectural BIM modeling, documentation, and shop drawing production. Strong proficiency in Autodesk Navisworks for model coordination, clash detection, and coordination reporting. Proficiency in Auto CAD and Microsoft Office applications. Experience in multidisciplinary coordination with architectural, structural, and MEP disciplines. Understanding of BIM standards, workflows, and BIM Execution Plans (BEP). Strong coordination, teamwork, and problem-solving skills. Excellent communication and collaboration abilities. Familiarity with Egyptian and Saudi building codes, standards, and regulatory requirements. Knowledge of international building codes and regulations is preferred. Familiarity with sustainable design principles and Modern Methods of Construction (MMC) is an advantage.

Senior Technical Sales Engineer <br>Industry: Industrial Automation, Modular Aluminum Systems, & Lean Manufacturing Solutions Location: 6th of October, Egypt Position Level: Senior / Mid-Senior <br>Job Summary:Our client, a rapidly growing leader in the industrial solutions sector, is seeking a highly motivated and technically skilled Senior Technical Sales Engineer. In this role, you will lead business development, manage key accounts, and act as the vital link between engineering excellence and commercial growth. You will combine strong technical expertise with strategic sales leadership to expand market presence across Egypt's industrial, automation, and manufacturing sectors, driving high-value capital equipment and modular system projects from prospecting to final handover. <br>Key Responsibilities<br>Strategic Sales Leadership: Develop and implement technical sales strategies to achieve revenue goals and maintain a robust project pipeline across manufacturing and heavy production sectors. Consultative Technical Sales: Identify new business opportunities, conduct detailed site visits, and perform technical consultations with plant managers, production teams, and procurement departments to assess operational needs. Customized Solution Design: Collaborate closely with internal technical and design teams to propose tailored system configurations, utilizing mechanical drawings or CAD blueprints to meet exact customer specifications. Proposals & Bidding: Prepare and present highly accurate technical and commercial proposals, quotations, and layouts; actively participate in bidding processes and respond to complex RFQs. Relationship & Account Management: Manage high-value capital projects, lead complex negotiation cycles, and cultivate long-term partnerships with factories, OEMs, and automation integrators. Product Demonstrations: Deliver compelling technical presentations and machinery demonstrations highlighting efficiency, lean production value, and ROI. Cross-functional Coordination: Synchronize with engineering, logistics, and after-sales teams to ensure the seamless delivery, installation, and commissioning of systems while maintaining meticulous sales records via CRM tools. Mentorship: Provide guidance, support, and mentorship to junior sales engineers within the team. <br>Qualifications & Experience Education: Bachelor’s Degree in Mechanical Engineering, Industrial Engineering, Mechatronics, or a closely related technical field. Experience: Minimum of 3 to 8 years of proven experience in B2B technical sales, specifically within heavy machinery, industrial solutions, automation components, or modular aluminum systems. Technical Proficiency: Strong understanding of industrial production processes, technical drawings, CAD layouts, lean manufacturing tools, conveyors, and ergonomic workstation designs. Commercial Skills: Outstanding negotiation, presentation, and technical documentation skills with a proven track record of managing long-term, multi-stakeholder consultative sales cycles. Languages: Fluent command of both English and Arabic. Mobility: Must possess a personal car, a valid driver's license, and a strong willingness to travel frequently to industrial facilities, production sites, and exhibitions across Egypt. <br>What is Offered A challenging role within a fast-developing industrial solutions sector. Opportunities to work with cutting-edge lean manufacturing technologies. A competitive compensation and commission package reflecting your experience and sales achievements. How to Apply Interested candidates who meet the above criteria are invited to submit their updated CV highlighting relevant industrial sales achievements.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b><span>Overview</span><p>The GIS Engineer (Geospatial &amp; Data Analysis) is responsible for managing, analyzing, and visualizing geospatial data to support multidisciplinary projects. The role focuses on delivering accurate mapping, environmental analysis, and digital solutions while supporting data integration and visualization across projects.</p><br><span>Your role</span><ul><li>Manage and maintain geospatial datasets, including external GIS data and internally managed databases (e.g., EQUIS)</li><li>Support multidisciplinary projects through GIS data management, spatial analysis, mapping, and reporting</li><li>Prepare environmental and technical drawings such as:</li><li>Site and utility location plans</li><li>Cross-sections and contour maps</li><li>Presentation drawings based on engineering inputs</li><li>Develop 2D and 3D visualizations, perform volume calculations, and conduct spatial analysis</li><li>Support the development and maintenance of GIS platforms (e.g., ArcGIS Online)</li><li>Create and manage digital tools such as Survey123 forms, Collector maps, and interactive web maps/applications</li><li>Assist in integrating GIS data with AutoCAD Map 3D and other engineering tools</li><li>Collaborate with engineering and environmental teams to support project delivery</li><li>Ensure data quality, consistency, and alignment with project requirements</li><li>Contribute to improving workflows and geospatial data processes</li></ul><span>About you</span><ul><li>Bachelor’s degree in GIS, Geomatics, Geography, Environmental Engineering, or a related field</li><li>2+ years of experience in GIS, geospatial analysis, or a similar role</li><li>Proficiency in GIS tools such as ArcGIS, ArcGIS Pro, ArcGIS Online, Survey123, and Collector</li><li>Working knowledge of AutoCAD Map or similar drafting tools</li><li>Familiarity with databases and programming tools such as Python, SQL Server, R, or JavaScript (preferred)</li><li>Experience in environmental, hydrological, or geospatial projects is an advantage</li><li>Experience with 3D visualization, volume calculations, and spatial analysis</li><li>Knowledge of GPS systems, field surveying techniques, and data collection tools is a plus</li><li>Strong analytical, technical, and problem-solving skills</li><li>Ability to work effectively in a fast-paced, multidisciplinary environment</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li><span>Comprehensive life insurance coverage</span></li><li><span>Medical insurance for you and your dependents</span></li><li><span>Annual leave balance in accordance with local labour law</span></li><li><span>Flexible and hybrid work solutions</span></li><li><span>Opportunity for local and global internal transfers</span></li><li><span>Company gratuity scheme</span></li><li><span>Discretionary bonus program</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition</span></li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.</p><br><p>Find out more. &nbsp;</p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b><span>Overview</span><p>The GIS Engineer (Geospatial &amp; Data Analysis) is responsible for managing, analyzing, and visualizing geospatial data to support multidisciplinary projects. The role focuses on delivering accurate mapping, environmental analysis, and digital solutions while supporting data integration and visualization across projects.</p><br><span>Your role</span><ul><li>Manage and maintain geospatial datasets, including external GIS data and internally managed databases (e.g., EQUIS)</li><li>Support multidisciplinary projects through GIS data management, spatial analysis, mapping, and reporting</li><li>Prepare environmental and technical drawings such as:</li><li>Site and utility location plans</li><li>Cross-sections and contour maps</li><li>Presentation drawings based on engineering inputs</li><li>Develop 2D and 3D visualizations, perform volume calculations, and conduct spatial analysis</li><li>Support the development and maintenance of GIS platforms (e.g., ArcGIS Online)</li><li>Create and manage digital tools such as Survey123 forms, Collector maps, and interactive web maps/applications</li><li>Assist in integrating GIS data with AutoCAD Map 3D and other engineering tools</li><li>Collaborate with engineering and environmental teams to support project delivery</li><li>Ensure data quality, consistency, and alignment with project requirements</li><li>Contribute to improving workflows and geospatial data processes</li></ul><span>About you</span><ul><li>Bachelor’s degree in GIS, Geomatics, Geography, Environmental Engineering, or a related field</li><li>5-7 years of experience in GIS, geospatial analysis, or a similar role</li><li>Proficiency in GIS tools such as ArcGIS, ArcGIS Pro, ArcGIS Online, Survey123, and Collector</li><li>Working knowledge of AutoCAD Map or similar drafting tools</li><li>Familiarity with databases and programming tools such as Python, SQL Server, R, or JavaScript (preferred)</li><li>Experience in environmental, hydrological, or geospatial projects is an advantage</li><li>Experience with 3D visualization, volume calculations, and spatial analysis</li><li>Knowledge of GPS systems, field surveying techniques, and data collection tools is a plus</li><li>Strong analytical, technical, and problem-solving skills</li><li>Ability to work effectively in a fast-paced, multidisciplinary environment</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li><span>Comprehensive life insurance coverage</span></li><li><span>Medical insurance for you and your dependents</span></li><li><span>Annual leave balance in accordance with local labour law</span></li><li><span>Flexible and hybrid work solutions</span></li><li><span>Opportunity for local and global internal transfers</span></li><li><span>Company gratuity scheme</span></li><li><span>Discretionary bonus program</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition</span></li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.</p><br><p>Find out more. &nbsp;</p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div>

Core Responsibilities:<br><br>▪ Prepare and review low-level designs for team members, in collaboration with Solution/Software Architect<br><br>▪ Guides project teams on technology strategy related to coding practices, continuous integration and automated<br><br>deployment<br><br>▪ Be hands on and engage in coding to help the team to develop his solution and solve all surfacing problems at hand<br><br>Identifies and removes technical impediments<br><br>▪ Thought partners with the Product owner in story creation and acceptance criteria, and communicate tradeoffs<br><br>effectively with Designers<br><br>▪ Constantly looking for better ways of solving technical problems and designing the solution, not afraid of<br><br>challenging the status quo<br><br>▪ Provides the team a roadmap for implementing software engineering practices for higher code quality<br><br>Minimum Qualifications:<br><br>Engineer III<br><br>▪ 4-6 years with mobile application development using Java / Kotlin for Android<br><br>▪ Bachelor's degree in Computer Science or similar, advanced degree preferred with<br><br>outstanding record of academic achievement.<br><br>▪ Strong understanding of design patterns over and above MVP, MVVM, and MVC.<br><br>▪ Strong understanding of interactive application development paradigm under Android,<br><br>memory management, file I/O, network programming, concurrency and Rx-Java and/or<br><br>coroutines / live-data.<br><br>▪ Expert working knowledge of Java, Kotlin, Intelli J, Eclipse and/or Android Studio.<br><br>▪ Hands-on Unit testing and mocking<br><br>▪ Knowledge CI/CD Azure, Jenkins, Circle, Git Lab, ... etc. a plus.<br><br>Staff Engineer<br><br>▪ 6-8 YoE, Seen as expert in developing native Android Apps using both Java and Kotlin<br><br>▪ Can assist and support in making architecture decisions at a team and product level<br><br>▪ Knowledgeable in Android design patterns for building scalable and robust Apps<br><br>▪ Seasoned software developer Android, Java, Kotlin, Junit, Rx-Java, live-data, coroutines, Rx-Kotlin,<br><br>and integration with REST APIs, Push Notifications, and Secure App.<br><br>▪ Good Understanding of different design patterns like MVC, MVVM, MVP & VIPER<br><br>▪ Excellent knowledge of Mobile UX and UI standards<br><br>▪ Preferred to have experience in Azure Pipelines, Jenkins, or any other CI.<br><br>Sr. Staff Engineer<br><br>▪ 8-10 YoE, Seen as expert in developing native Android Apps using both Java and Kotlin<br><br>▪ Can assist and support in making architecture decisions at a team and product level<br><br>▪ Knowledgeable in Android design patterns for building scalable and robust Apps<br><br>▪ Seasoned software developer Android, Java, Kotlin, Junit, Rx-Java, live-data, coroutines, Rx-Kotlin,<br><br>and integration with REST APIs, Push Notifications, and Secure App.<br><br>▪ Good Understanding of different design patterns like MVC, MVVM, MVP & VIPER<br><br>▪ Excellent knowledge of Mobile UX and UI standards<br><br>▪ Preferred to have experience in Azure Pipelines, Jenkins, or any other CI.<br><br>▪ Strong communication skills with ability to align the organization on complex technical decisions<br><br>▪ Active coach and mentor whose goals are to grow and maximize the team's potential

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>We are looking for a motivated and technically solid L1 Data Engineer to join our growing Data &amp; Analytics team.<br> In this role, you will be responsible for designing, building, and maintaining the data architecture and infrastructure that supports our organization's data strategy.<br> You will work hands-on to develop, test, and deploy reliable data solutions — ensuring pipelines are scalable, efficient, and aligned with business requirements.<br> This is an ideal opportunity for a data professional who is eager to deepen their expertise in cloud-native data platforms, particularly within the Microsoft Azure and Databricks ecosystem, and who thrives in a collaborative, fast-paced environment.<br> KEY RESPONSIBILITIES • Design, develop, and maintain scalable data pipelines and ETL/ELT workflows to support business intelligence and analytics use cases.<br> • Build and optimize data ingestion processes using Azure Data Factory and Databricks, ensuring data quality and consistency across all layers of the data platform.<br> • Transform and process large datasets using PySpark and Python, applying best practices for performance and maintainability.<br> • Write and optimize complex SQL queries to support analytical reporting and data validation requirements.<br> • Collaborate with data architects and senior engineers to implement and maintain data models aligned with organizational standards.<br> • Monitor, troubleshoot, and resolve pipeline failures and data quality issues, applying root-cause analysis to prevent recurrence.<br> • Contribute to documentation of data pipelines, data dictionaries, and engineering standards.<br> • Support the team in exploring and evaluating new tools and approaches to continuously improve the data infrastructure.<br> 2+ years of professional experience in a Data Engineering or closely related role.<br> Strong proficiency in Python for data processing, transformation, and automation tasks.<br> Hands-on experience with Pandas for data manipulation and PySpark for distributed data processing.<br> Practical experience with Databricks, including notebook development, clusters, and job orchestration.<br> Experience building and managing data pipelines with Azure Data Factory.<br> Working knowledge of Azure Synapse Analytics, particularly Spark pool integration.<br> Solid SQL skills, including query writing, optimization, and performance tuning.<br> Familiarity with data engineering principles including incremental loading, data lake architecture, and Delta Lake.<br> Understanding of data governance and security concepts within a cloud data platform.<br> NICE TO HAVE Experience with SQL Server migration projects, including schema conversion and data movement.<br> Exposure to Terraform for Azure infrastructure provisioning and management.<br> Familiarity with CI/CD practices applied to data engineering workflows.<br> Experience with Delta Sharing or Lakehouse Federation concepts.<br> CERTIFICATION REQUIREMENT Candidates are expected to hold or be actively working toward the Databricks Certified Data Engineer Associate certification.<br> This certification validates foundational knowledge across the following domains: Databricks Lakehouse Platform architecture and capabilities ETL and ELT workflows using Spark SQL and PySpark Incremental data processing and structured streaming Production pipeline development and orchestration Data governance and security within the Databricks environment</span> </div>

⚠️ ???????????????????????????????????????????? ???????????????????? — ???????????????????????????????? ????????????????????????????????????????<br>If you have already applied to a recent Accelon Health similar AI role, please do not apply again.<br>Your existing application remains under review, and shortlisted candidates will be contacted soon..<br>Duplicate or repeated applications will not be considered.<br>???????????????????? ???????? ???????????????????????????????? – ???????????????????????????????????????????????????????? ???????? ????????????????????????????<br>???? Location: Egypt???? Experience: 3–6 years<br>Accelon Health is building a core technology team to develop and scale advanced Voice AI systems across healthcare workflows and complex operational environments.<br>We are looking for an experienced Voice AI Engineer who can contribute across speech technology, conversational-system architecture, product development, deployment, and the long-term evolution of our technology.<br>The role will involve:<br>• Designing and developing real-time conversational AI systems• Building and optimizing ASR, TTS, and speech-processing pipelines• Developing low-latency voice agents capable of maintaining context and using tools• Working with open-weight speech, language, and multimodal models• Implementing streaming audio, voice activity detection, interruption handling, turn-taking, and speaker diarization• Integrating Voice AI with telephony systems, contact centres, Whats App, APIs, and enterprise applications• Supporting multilingual experiences, particularly Arabic and English• Improving recognition accuracy, response latency, conversational quality, reliability, safety, and cost efficiency• Developing evaluation, monitoring, and observability frameworks for production Voice AI systems<br>We are looking for someone with:<br>• Strong foundations in speech processing, machine learning, NLP, and software engineering• Hands-on experience with ASR, TTS, and conversational AI systems• Experience developing real-time or low-latency audio applications• Familiarity with streaming technologies and protocols such as Web Sockets, SIP, or Web RTC• Strong backend-development and systems-integration capabilities• Experience deploying AI systems into production• A practical understanding of model evaluation, monitoring, MLOps, and responsible AI• The ability to take ownership of a solution from technical design through production deployment<br>Experience with Arabic speech technology, telephony, or healthcare AI is an advantage, but not mandatory.<br>You will work closely with the founders, product leadership, and healthcare specialists, helping translate complex real-world workflows into reliable and scalable voice experiences.<br>This opportunity is intended for someone interested in contributing to the long-term development of both the technology and the business. For exceptional contributors with genuine long-term alignment, the opportunity may evolve beyond the scope of a conventional engineering role.<br>If this sounds like you, please send:<br>• ???????????????? ????????• ???? ???????????????????? ???????????????????????????????????????????? ???????? ???????????? ???????????????? ???????????????????????????????? ???????????????????? ???????? ???????? ???????????????????????????????????????????????????????? ???????????????????????? ???????????? ???????????????? ????????????????????????????????????• ???? ???????????????????? ???????????????????????????????????????????? ???????? ???????????????? ???????????????????????????????? ???????????????????????????????????????????????? ???????? ???????????????? ????????????????????????<br>???? ????????????????????: ????????????????????????????@????????????????????????????????????????????????????.????????????????????????????????????????: ???????????????????? ???????? ???????????????????????????????? – [???????????????? ????????????????]<br>#Hiring #Voice AI #Conversational AI #Speech AI #ASR #TTS #AIEngineering #Machine Learning #Generative AI #Applied AI #Arabic AI #Egypt Jobs #Tech Jobs #Accelon Health

<p>Duties &amp; Responsibilities</p><ul><li>Install, troubleshoot, and maintain enterprise IT hardware including Servers, Storage, Networking, and Backup devices.</li><li>Perform Preventive Maintenance (PM) and Corrective Maintenance (CM) activities at customer locations.</li><li>Diagnose and resolve hardware failures on Dell, HPE, Lenovo, IBM, Cisco, EMC, NetApp, and other enterprise platforms.</li><li>Replace Field Replaceable Units (FRUs) such as HDDs, SSDs, Memory, Power Supplies, Controllers, Fans, and Motherboards.</li><li>Coordinate with OEM vendors and technical support teams for issue resolution and part replacement.</li><li>Troubleshoot hardware, storage, and network-related issues within defined SLA timelines.</li><li>Prepare service reports, maintenance reports, and documentation after each service activity.</li><li>Maintain inventory of spare parts and ensure proper asset tracking.</li><li>Provide technical guidance and support to junior and field engineers.</li><li>Participate in customer meetings and provide technical recommendations.</li><li>Ensure compliance with company processes, quality standards, and safety guidelines.</li><li>Be available for on-site support, emergency service calls, and travel as required.</li><li>Maintain excellent customer communication and deliver high-quality technical support.</li></ul><p>Required Skills</p><p>&nbsp;</p><ul><li>5+ years of experience in Enterprise Hardware Support.</li><li>Hands-on experience with Dell, HPE, Lenovo, IBM, Cisco, EMC, NetApp, and other enterprise hardware.</li><li>Strong troubleshooting and analytical skills.</li><li>Good communication, documentation, and customer handling skills.</li><li>Ability to work independently as well as in a team environment.</li><li>Willingness to travel across customer locations.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Tagaddod is pioneering in the field of waste collection technology. We are looking for talented individuals to help elevate our operations to the next level. This position combines responsibilities in Engineering and Quality Control. We seek an individual with strong leadership capabilities and a willingness to tackle challenges. This role will be based at our site in Alexandria.</p><p><b>Responsibilities</b>:</p><ul><li>Coordinate and supervise all installations and refurbishments at the Alexandria site.</li><li>Lead daily briefings with warehouse operators and report to the site director on stock levels and issues.</li><li>Ensure health and safety, hygiene, and security standards are maintained in the work environment.</li><li>Examine and test raw materials and supplies delivered to the site against acceptance criteria.</li><li>Maintain up-to-date stock control systems and accurate inventories.</li><li>Oversee planned maintenance of vehicles, machinery, and equipment.</li><li>Supervise warehouse operators and external contractors.</li><li>Coordinate the use of automated and digital systems as needed.</li><li>Track and report key functional metrics aimed at reducing expenses and improving effectiveness.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 years of relevant experience in operational or industrial environments .</li><li>Bachelor s degree in Engineering, in Chemical, Petroleum, or Mechanical Engineering.</li><li>Proficiency in Microsoft Excel.</li><li>Strong leadership and communication skills.</li><li>Strong analytical and problem-solving abilities.</li><li>Ability to work at both strategic and tactical levels.</li><li>Team player with a proactive approach.</li><li>Living in or near Alexandria City is a must.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Tagaddod is pioneering in the field of waste collection technology. We are looking for talented individuals to help elevate our operations to the next level. This position combines responsibilities in Engineering and Quality Control. We seek an individual with strong leadership capabilities and a willingness to tackle challenges. This role will be based at our site in October City.</p><p>Responsibilities:</p><ul><li>Coordinate and supervise all installations and refurbishments at the October site.</li><li>Lead daily briefings with warehouse operators and report to the site director on stock levels and issues.</li><li>Ensure health and safety, hygiene, and security standards are maintained in the work environment.</li><li>Examine and test raw materials and supplies delivered to the site against acceptance criteria.</li><li>Maintain up-to-date stock control systems and accurate inventories.</li><li>Oversee planned maintenance of vehicles, machinery, and equipment.</li><li>Supervise warehouse operators and external contractors.</li><li>Coordinate the use of automated and digital systems as needed.</li><li>Track and report key functional metrics aimed at reducing expenses and improving effectiveness.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum of 3 years of relevant experience in operational or industrial environments . Bachelor s degree in Engineering, in Chemical, Petroleum, or Mechanical Engineering. Proficiency in Microsoft Excel. Strong leadership and communication skills. Strong analytical and problem-solving abilities. Ability to work at both strategic and tactical levels. Team player with a proactive approach. Living in or near 6th of October City.</p><p></p></section>

Job Objective: Delivering High-Quality Support & ensuring Optimal System Performance. The Field Service Engineer (FSE) is responsible to perform the Main duties and Responsibilities that follows including the daily service (Preventive Maintenance, Installations and Repair and All Needed of the customers’ equipment to be in Highest Operational Status. Dedicated to minimizing downtime through proactive maintenance, rapid troubleshooting, and excellent customer support. Establish and maintain proper business relationships with customers as well as performing necessary administrative duties as required and other duties as assigned.<br>Main Duties and Responsibilities Installation Responsible for pre-installation site inspection and reporting (including documentation). Responsible for installation of medical devices at customer site (according to time plan). Abiding by Sysmex instrument installation manuals. <br>Customer Support Basic troubleshooting, maintenance, and repair on Sysmex instruments. Provide High Quality Customer Support through phone (Remote Support) and On-Site support when needed without any delay, accomplish PPM Plan as scheduled with customers in line with Sysmex standards. Maintaining daily communications with customers to ensure resolution and proper follow-up. Completing Preventative Maintenance and field modifications & SW Updates in line with Sysmex Standard.<br>Service Contracts Meet Service Sales Target via New Service Contracts & Renewal of valid contracts as advised by Management.<br> Product Knowledge Attending necessary Trainings to work as per Sysmex standards (Online & Class). <br>Spare Parts:Ordering and managing spare parts required for his own Car-Stock, monthly match the spare parts Inventory & Order. Administrative duties Keeping up to date on administrative responsibilities such as maintaining MS Dynamics Registration, Service Call logs and internal service records in a timely manner. Utilizing the escalation process to resolve customer Service & Technical issues. Identifying and participating in service sales opportunities such as new contracts signing, and contract marketing & Renewals. Working as a Member of the team to provide efficient service delivery to all accounts within assigned area. Service Reports Activity to be done after every Visit (Signed & Stamped) specially after installation. Give Support in Training Academy if possible (As Trainer or Co-Trainer) Meeting Health and Human Services, Environmental Health, and Safety and/or all other applicable regulatory requirements.<br>Education and Experience: Bachelor of Engineering: (Biomedical - Electronics - Mechatronics) Departments Only. 1-5 years of relevant experience. Valid driver's license. Sound knowledge of medical terminology and legislation. Proficiency in all Microsoft Office applications is an extra point.<br>Required Skills/Abilities: Customer Support skills, Effective communication and negotiation skills. Excellent Technical analytical and problem-solving skills. Active and Self Organized.

RAF Specialty Coffee is looking for a highly motivated and technically skilled Maintenance Engineer to join our growing team. The successful candidate will play a critical role in ensuring the reliability, efficiency, and continuous operation of all branch facilities and equipment. <br>This position requires a proactive professional capable of managing preventive maintenance programs, troubleshooting technical issues, supporting new branch openings, and driving continuous improvement initiatives across the organization.<br>Key Responsibilities Preventive & Corrective Maintenance<br>• Develop and execute preventive maintenance plans for all branch equipment and facilities.• Ensure timely completion of maintenance schedules and monitor compliance across branches.• Respond quickly to breakdowns and emergency maintenance requests.• Identify root causes of recurring failures and implement sustainable corrective actions.<br>Coffee Equipment Maintenance• Maintain and calibrate espresso machines, coffee grinders, brewing equipment, and specialty coffee tools.• Ensure equipment operates according to manufacturer standards and quality requirements.• Support operational teams in maintaining optimal equipment performance.<br>Electrical, Mechanical & Facility Maintenance• Maintain electrical systems, panels, wiring, and mechanical equipment.• Oversee plumbing, water systems, pumps, motors, and facility infrastructure.• Ensure compliance with safety and operational standards.• Maintain air conditioning, ventilation, and refrigeration systems across branches.• Monitor refrigeration equipment to ensure food safety and product quality standards are maintained.<br>New Branch Projects & Handover• Participate in the technical inspection and handover of new branches.• Verify compliance with approved specifications, drawings, and operational requirements.• Coordinate commissioning activities and ensure branch readiness before opening.• Prepare technical documentation, warranties, and maintenance records for newly opened locations.<br>Vendor & Contractor Management• Manage relationships with maintenance contractors and external service providers.• Monitor service quality and compliance with agreed SLAs.• Evaluate contractor performance and recommend improvements.<br>Health, Safety & Compliance• Ensure all maintenance activities comply with health, safety, and regulatory requirements.• Support branch compliance with civil defense and safety standards.<br>Cost Control & Energy Efficiency• Monitor maintenance budgets and optimize maintenance costs.• Identify opportunities to improve energy efficiency and reduce operational expenses.• Support repair-versus-replacement decisions through technical and financial analysis.<br>Reporting & Continuous Improvement• Maintain accurate maintenance records and asset history.• Analyze maintenance trends and equipment performance data.• Recommend process improvements and predictive maintenance initiatives to enhance operational reliability.<br>Requirements Education• Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Mechatronics Engineering, or a related field. Experience• 3–6 years of experience in maintenance engineering, facility management, or technical operations.• Experience in Retail, Hospitality, F&B, Coffee Chains, Restaurants, or Multi-Branch Operations is highly preferred.• Experience with espresso machines, coffee equipment, HVAC systems, and refrigeration is a strong advantage.<br>Technical Skills<br>• Preventive & Corrective Maintenance• Electrical & Mechanical Systems• HVAC & Refrigeration Systems• Coffee Equipment Maintenance• Root Cause Analysis• Facility Management• Maintenance Planning & Reporting• Microsoft Excel & Reporting Tools<br>Competencies<br>✔ Problem Solving & Troubleshooting✔ Analytical Thinking✔ Planning & Organization✔ Attention to Detail✔ Communication Skills✔ Time Management✔ Continuous Improvement Mindset✔ Ability to Work Under Pressure<br>If you are passionate about operational excellence and enjoy solving technical challenges in a fast-paced environment, we'd love to hear from you.<br>???? Apply now by sending your CV to: careers@raf-coffee.com

Build the Paa S platform that brings AI-augmented chip design to every engineering team. About Nativechips<br>Native Chips (NC) is a US-based company with teams in the US and Cairo, building an AI-augmentedplatform for chip design. We work across proprietary and open-source EDA stacks, applying AI/ML tomake chip design faster and more accessible. We deliver platforms to IDMs and offer self-serve Paa S to design teams worldwide. We're a small, senior team — every hire shapes the product and the company.<br>About the role<br>We're hiring a Senior Full Stack Engineer to own the Paa S platform — the customer-facing application,APIs, and integrations. You'll build the product that customers actually log into, working closely with Dev Ops, AI engineers, and product to ship features that matter.<br>What you'll do<br>Build and maintain the Paa S web application (frontend + backend) Design and implement APIs for platform integrations and customer use Implement user/account management, billing integration, and multi-tenant architecture Partner with Dev Ops on deployment architecture and reliability Optimize for performance and reliability as we scale toward our first 100+ customers<br>What we need from you<br>5+ years full-stack web development with production Saa S experience Strong React or Next.js on the frontend Strong Python (Fast API, Django) or Node.js (Express, Nest JS) on the backend Postgre SQL + Redis fluency Track record of shipping production features end-to-end<br>Bonus points for<br>Multi-tenant Saa S architecture experience Stripe or similar billing integration Background job systems (Celery, Bull MQ, Temporal) Interest in or familiarity with developer tools, EDA, or hardware<br>Why Native Chips<br>Direct impact on product direction and engineering culture from day one Work alongside a senior, founder-led team with deep semiconductor industry experience Cairo-based engineering team with US headquarters; remote-friendly working model Competitive compensation with meaningful stock options for early hires Work on technically substantial problems — not maintenance work<br>Location: Cairo-based, remote-friendly.

Sales Engineer / Senior UPS - CRAC - Datacenter Duties & Responsibilities:Sell CRAC, RAC, UPS, and all Data Center components, and generate sales opportunities within the assigned sector to achieve customer satisfaction and sales targets. Plan and organize weekly sales activities in coordination with the Sales Manager to effectively cover the assigned customer list and follow up on pending deals. Identify and prospect new customers who may have interest in the company’s products and solutions. Visit customers to present VERTIV products and respond to technical and commercial inquiries. Participate in preparing quotations, reviewing tender documents, and proposing payment terms for management approval. Attend tender meetings and clarify all related technical and commercial questions. Coordinate and liaise with consulting engineers whenever required to support project opportunities. Conduct customer background investigations and market assessments when requested. Present technical catalogs, publications, and drawings to customers and demonstrate the advantages of VERTIV products and solutions. Support and participate in the delivery and handover process of UPS, CRAC units, and Data Center solutions to customers when needed. Monitor competitors’ products, pricing, and commercial terms, and report findings in writing to management. Collaborate with the After-Sales team to exchange information and coordinate customer support activities. Prepare daily activity reports and escalate any challenges or issues to the Sales Manager for timely resolution. Qualifications:UPS / CRAC units / Data Centre and electrical equipment experience. Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.3-5 years of experience in technical sales, preferably with UPS / CRAC units / Data Center. Proven track record of achieving sales targets within the engineering or industrial equipment sector. Excellent communication, negotiation, and presentation skills. Willingness to travel to client sites and project locations as needed. Proficiency in MS Office. Strong problem-solving skills and a customer-oriented mindset. Ability to work independently and as part of a multidisciplinary team. Owning a car is a must.<br>careers@onspec.net

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a highly skilled and experienced L2 Data Engineer to join our growing Data &amp; Analytics team. In this role, you will lead the design, development, optimization, and maintenance of scalable enterprise data platforms and cloud-native data solutions. You will work closely with architects, analysts, and business stakeholders to build high-performance data pipelines and modern lakehouse solutions that support advanced analytics, reporting, and data-driven decision-making.</p><br><p>This opportunity is ideal for a senior data professional with strong hands-on expertise in Databricks and the Microsoft Azure ecosystem, who is passionate about building reliable, scalable, and optimized data platforms in enterprise environments.</p><br><p><strong>KEY RESPONSIBILITIES</strong></p><br><p>• Design, develop, and optimize enterprise-scale data pipelines and ETL/ELT workflows using Azure and Databricks technologies.</p><br><p>• Architect and implement scalable data ingestion, transformation, and orchestration processes using Azure Data Factory, Databricks, and Azure Synapse Analytics.</p><br><p>• Develop high-performance data transformation frameworks using PySpark, Python, and Spark SQL for large-scale distributed data processing.</p><br><p>• Optimize SQL queries, Spark jobs, and data workflows to improve performance, scalability, and cost efficiency.</p><br><p>• Lead data migration initiatives, including SQL Server migrations and modernization of legacy data platforms.</p><br><p>• Implement and maintain Delta Lake architecture, incremental data loading strategies, and enterprise data lake best practices.</p><br><p>• Collaborate with architects and cross-functional teams to design robust and scalable data models aligned with business and governance standards.</p><br><p>• Monitor and troubleshoot production pipelines, perform root-cause analysis, and implement preventive measures for recurring issues.</p><br><p>• Support CI/CD implementation and infrastructure automation for data engineering workflows.</p><br><p>• Mentor junior engineers and contribute to engineering standards, reusable frameworks, and technical best practices.</p><br><p>• Create and maintain technical documentation including architecture diagrams, pipeline documentation, and operational runbooks.</p><br><p>• Evaluate and recommend modern data engineering tools, frameworks, and optimization strategies.</p><br> </div>

Sales – Furniture Field<br>About the Company:We are a leading company in the field of home and office furniture, and we are looking to hire a Sales Engineer with strong knowledge of interior furniture and the ability to provide both technical and commercial solutions to clients.<br>Location: — October <br>⸻<br>Responsibilities:• Welcome customers in the showroom and provide professional technical consultations regarding suitable furniture options.• Prepare quotations and simple design proposals when required.• Present product features and technical advantages clearly and professionally.• Achieve monthly sales targets and submit performance reports.• Assist in maintaining the showroom display and overall presentation.• Follow up with customers after sales to ensure satisfaction and provide support.• Coordinate with the design and production departments to ensure accurate order execution.<br>⸻<br>Requirements:• Preferred: Graduates of Applied Arts – Interior Furniture Department or related interior design fields.• Previous experience in furniture sales or interior design is an advantage.• Excellent communication and persuasion skills.• Presentable and punctual.• Good computer skills; basic knowledge of design software (Auto CAD / Sketch Up) is a plus.• Ability to work within a team and handle work pressure.<br>⸻<br>Benefits:• Competitive fixed salary + attractive sales commissions + Bonus + Social insurance .• Continuous training and career development opportunities.• Professional and supportive work environment.<br>How to Apply:<br>Please send your CV via:???? hr@furnitureofegypt.com???? Whats App: 01273930440

About the Job:<br>Quality Engineering (QE-Engineer) is responsible for managing the end-to-end problem-solving process for MFG quality issues, the role ensures effective problem containment, root cause identification, corrective action implementation, and verification of effectiveness. QE leads cross-functional problem-solving teams, monitors open quality issues, escalates delays and risks, and ensures that lessons learned are standardized and applied across relevant products and processes to prevent recurrence.<br>Responsibilities:<br>Problem Solving Process Management;<br>Manage the complete lifecycle of quality problems from detection to formal closure. Maintain a centralized tracking system for internal, supplier, and customer quality issues. Classify and quality issues based on customer impact, regulatory compliance, recurrence risk, and operational impact. Assign problem owners and define clear responsibilities, deliverables, and target dates. Facilitate regular problem-solving review meetings with cross-functional teams. Monitor the progress of containment actions, root cause analysis, corrective actions, effectiveness verification, and final validation results. Escalate overdue actions, recurring problems, and high-risk issues to the relevant management level. Ensure that quality problems are not solved without sufficient evidence and effectiveness validation.<br>Qualifications:<br>Bachelor’s degree in: Automotive Engineering, Mechanical Engineering, or Industrial Engineering.0-2 years of experience in manufacturing quality, process quality, customer quality, and continuous improvement. Six Sigma background is preferred. (Yellow Belt or Green Belt). IATF 16949 Background is preferred.

Company Description Living In Interiors is a Cairo-based design and construction firm, established in 1992, known for delivering high-quality interior and exterior projects through its Design, Construction, Development, and Commercial Retail divisions. The company operates independently, executing all core work in-house, from concept to completion, without relying on sub-contractors. With over 30 years of experience, teams work from the New Cairo headquarters and the ARCO woodworking factory in Abu Rawash to provide bespoke, detail-oriented solutions. Living In Interiors focuses on crafting long-lasting, elegant spaces by combining attentive service with timeless design for an affluent clientele. The organization values precision, quality craftsmanship, and a thorough project delivery process.<br>Role Description The Technical Engineer Furniture & Woodwork role is a full-time, on-site position based in Abo Rawash. The role involves preparing detailed technical drawings, shop drawings, and production documents for bespoke furniture and woodwork, ensuring designs are feasible, accurate, and aligned with project specifications. <br><br>Qualifications Minimum 2–10 years of experience in furniture and woodwork projects — a must. Experience in preparing project documentation, including: RFIs Reports Technical drawings. Proficiency in: Auto CAD, Revit and Microsoft Office Strong attention to detail and ability to work effectively within a team. Excellent problem-solving and organizational skills.

Role Purpose The IT Infrastructure Engineer is responsible for maintaining and supporting the organization’s IT infrastructure, ensuring smooth day-to-day operations, system availability, and efficient resolution of technical issues. The role focuses on end-user support, server management, virtualization, and network stability. Key Responsibilities & Duties• Provide end-user support, troubleshooting hardware, software, and system issues• Maintain and manage internal servers, including QNAP and related storage systems• Create and manage virtual machines and virtual environments (Virtualization)• Monitor system performance and ensure availability of IT infrastructure• Diagnose and resolve network issues (LAN/WAN, connectivity, access problems)• Support installation, configuration, and maintenance of IT systems and equipment• Perform regular system updates, backups, and security checks• Collaborate with internal teams to ensure smooth IT operations• Document issues, solutions, and system configurations Requirements• Bachelor’s degree in Computer Science, Information Technology, or related field.• 5+ years of experience in IT infrastructure or system administration.• Strong experience in end-user support and troubleshooting.• Hands-on experience with servers (QNAP or similar storage solutions).• Experience with virtualization technologies (VMware, Hyper-V, or similar).• Good understanding of networking concepts and issue resolution.• Strong problem-solving and communication skills.• Ability to work in a fast-paced environment and handle multiple tasks.