Electromechanical Engineer Jobs - Red Sea Egypt
46 Jobs Found
Save and set alert for similar positionsManage alerts
???? We’re Hiring: Senior MEP Engineers ????Company: Ace Project Management???? Location: Minya Ace Project Management is looking for experienced Senior MEP Engineers with 7+ years of experience to join our project team in Minya. Positions Available:???? Senior Electrical Engineer???? Senior Mechanical Engineer Requirements:✅ Bachelor’s degree in the relevant Engineering discipline✅ 7+ years of experience in site supervision and MEP construction works✅ Strong knowledge of relevant systems, drawings, specifications, and applicable codes✅ Strong coordination skills with architectural, structural, and other MEP disciplines✅ Good communication, leadership, and reporting skills Responsibilities:???? Supervise MEP works on-site and ensure compliance with approved drawings and specifications???? Review shop drawings and material submittals???? Monitor installation quality, progress, and safety requirements???? Coordinate with contractors, consultants, and other project disciplines???? Follow up on inspections, testing, commissioning, and handover activities???? Identify and resolve technical issues on-site???? Apply now! Send your CV to [Abdulrahman.mostafa@ace-mb.com]Subject: Senior MEP Engineer – Minya#Hiring #MEP #Senior Engineer #Electrical Engineer #Mechanical Engineer #Construction Jobs #Minya #Ace Project Management
O&M Engineer (Wind Turbines) Location: Ra’s Gharib, Ras Gharib Company: Goldwind Work Arrangement: Site-Based (Rotation Schedule) Position Overview The O&M Engineer is responsible for performing operation and maintenance (O&M) activities for wind turbine generators (WTGs) in accordance with project schedules, company standards, and HSE requirements. This role includes preventive and corrective maintenance, troubleshooting, inspections, retrofits, reporting, and customer coordination to ensure the safe and reliable operation of wind farms. Key Responsibilities Operations & Maintenance Perform preventive and corrective maintenance on wind turbine generators (WTGs) in line with company procedures and project schedules. Diagnose and troubleshoot electrical, mechanical, hydraulic, and software-related faults. Replace defective components and complete defect-elimination tasks to restore turbine availability. Conduct scheduled inspections, retrofits, and technical upgrades. Analyze turbine operational data to identify trends and support performance optimization. Execute pre-Commercial Operation Date (pre-COD) activities, including completion checklist reviews and documentation verification. Carry out post-COD inspections and unscheduled maintenance activities. Site Supervision & Coordination Monitor and inspect installation contractors to ensure compliance with technical and quality standards. Coordinate with customers regarding completed services, planned maintenance, and technical issues. Prepare and submit accurate maintenance reports and service documentation. Inventory & Administration Manage spare parts, tools, and consumables inventory. Raise material requisitions and ensure timely availability of critical components. Maintain proper records of maintenance activities, inspections, and technical reports. Health, Safety & Environment (HSE) Strictly comply with company and site HSE policies and procedures. Identify, report, and mitigate workplace hazards. Report incidents and near misses accurately and promptly. Participate in HSE meetings, audits, and safety initiatives. Other Duties Support additional tasks and projects assigned by management. Qualifications & Experience Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Mechatronics, or a related discipline.1–3 years of experience in wind turbine operation and maintenance or in a similar industrial environment. Strong knowledge of electrical, mechanical, hydraulic, and control systems. Ability to read and interpret technical drawings, schematics, and manuals. Experience with SCADA systems and data analysis is preferred. Good command of English (written and spoken) MUST Valid driving license and willingness to travel and work in remote site locations. Ability to work at heights and in demanding weather conditions. Preferred Certifications GWO (Global Wind Organisation) certifications are highly preferred Key Competencies Problem-solving and analytical thinking Strong communication and teamwork Customer-oriented mindset Ability to work independently under pressure Commitment to safety and quality
Job Purpose:<br>Design review, design in house, coordinate, review company projects from conception stage to construction realization providing a high-quality product in targeted time with the required value engineer with minimum costs.<br>Responsibilities:Manage translation of development projects programs into applicable design over the complete project cycle from conception stage to construction, and make sure that each task is done on time within the assigned budget. Review and approve mechanical designs received from consultants, and lead coordination works with operation teams to guarantee the networks harmony. Review and supervise all design phases and deliverable to ensure that all the development objectives and concepts are delivered as planned Manage- in cooperation with project management team -conducting clear explanation for different projects and replying to quires and RFIs raised by the contractors. Follow up and supervise full implementation of contracts with consultants. In the case of in-house design, perform the design in accordance with the project plan, and Orascom vision. Manage the mechanical team while coordination with other disciplines to maintain and achieve Orascom vision. Review and approve technical submittals for mechanical systems. Document all relevant discussions thoroughly in letters, memos, or meetings reports.<br>Qualifications:BSC. Of Mechanical Power Engineering. Experience: 8-13 years, mainly in mechanical systems Design HVAC, Plumbing & Firefighting systems, infrastructure works…etc. experience in construction field, and real estate projects is a must. Computer skills: Perfect command of Auto CAD & RIVIT& Microsoft office & internet. Language Skills: Perfect command of English.
Company Description:Solar Installer EPC is an Egyptian shareholding company focused on becoming a leading solar energy provider in the Egyptian market, with a specialization in photovoltaic (PV) systems. The company has established an advanced international network of suppliers, EPCs, developers, and consultants to deliver high-quality solar solutions. Solar Installer EPC serves clients across Egypt and the broader MENA region, offering professional services that support sustainable energy projects. The headquarters is based in Cairo, Egypt, with project locations in key cities including Hurghada. Role Description:The Planning and Cost Control Engineer role is a full-time, on-site position based in Hurghada. This role is responsible for developing and maintaining project schedules, monitoring progress, and ensuring alignment with project milestones and contractual requirements. The engineer will prepare and track project budgets, analyze cost variances, and implement corrective actions to keep projects within approved financial limits. Daily tasks include coordinating with project managers and site teams, updating reports and dashboards, forecasting resource needs, and supporting procurement planning. The role also involves reviewing technical and commercial documentation, contributing to risk assessments, and ensuring adherence to company standards and client expectations. Qualifications:Strong skills in project planning and scheduling using relevant software tools (e.g., MS Project, Primavera), with the ability to develop and update detailed timelines. Proficiency in cost control, budgeting, and financial analysis, including tracking expenditures, preparing cost reports, and performing variance and forecast analysis. Experience in data analysis and reporting, with the ability to compile clear dashboards, progress reports, and performance indicators for stakeholders. Knowledge of solar energy or construction/EPC projects, including basic understanding of PV systems, site installation processes, and engineering documentation. Strong coordination and communication skills, with the ability to collaborate effectively with cross-functional teams and manage multiple tasks on-site. Bachelor’s degree in Engineering (preferably Electrical, Mechanical, Civil) or a related technical field. Good command of English and Arabic, both written and spoken, and strong MS Office skills (Excel, Word, Power Point)and Primavera P6Previous experience in planning, cost control, or project controls within construction, energy, or infrastructure projects is highly beneficial. Attention to detail, problem-solving mindset, and willingness to work on-site in Hurghada and occasionally travel to other project locations if required.
<p>WE ARE HIRING | Civil Site Manager</p><p> Location: Hurghada, Egypt</p><p>We are looking for an experienced Civil Site Engineer with a minimum of 15 years of experience in construction projects to join our team.</p><p>Essential Qualifications & Requirements:</p><p>Bachelor's degree in Civil Engineering.</p><p>Minimum 15 years of relevant experience in construction and site execution.</p><p>Proven experience in supervising and managing construction activities.</p><p>Excellent knowledge of structural, concrete, and finishing works.</p><p>Ability to read and interpret engineering drawings and technical specifications.</p><p>Experience in coordinating with consultants, contractors, and subcontractors.</p><p>Ability to monitor project progress, quality, and work schedules.</p><p>Good knowledge of construction standards, quality control, and safety regulations.</p><p>Proficiency in AutoCAD and Microsoft Office.</p><p>Strong communication, leadership, and problem-solving skills.</p><p>Work Location: Hurghada, Egypt.</p><p> Interested candidates are invited to submit their updated CVs. info@editegy.com</p>
Job Summary:Senior Site Technical Office Engineer will be responsible for leading all technical office functions, including design and document review, shop drawings, and material submittals, to ensure full project compliance. The role coordinates across disciplines, manages quantity surveying, variations, and invoicing, provides technical support to site teams, and ensures timely and high-quality project delivery.<br>Job Description 1. Study and analyze project contract documents (time schedule, design drawings, BOQ, specifications, etc.) to ensure project compliance.2. Complete, review, check, and approve all shop drawings prepared by the team before submission to the consultant.3. Prepare/update site progress reports in close coordination with the site team and highlight risks or delays.4. Review structure & MEP drawings and complete technical coordination required between different disciplines.5. Complete QS required and update relevant BOQ6. Ensure the site team is provided with the latest approved drawings, specifications, and technical instructions.7. Prepare and review material submittals to meet project requirements and coordinate with procurement.8. Prepare, review, and issue periodic client and sub-contractors running invoices as per contractual terms.9. Lead the preparation of variation orders, claims, and cost impacts, and follow up with the consultant till approval.10. Complete, review and approve as-built drawings and ensure timely submission to the project consultant.11. Coordinate with consultants, clients, and subcontractors to resolve technical issues and support smooth project execution.12. Provide technical support during project planning, risk assessment, and scheduling stages<br>Job Requirements• Bachelor’s degree in Civil or Architectural Engineering.• 5–7 years of experience in construction project management or technical office functions.• Proven experience in landscape and swimming pool projects is a strong advantage.• Excellent negotiation, communication, and leadership skills.
JOB OPPORTUNITY<br>We are a Main Market LSE listed company which provides a complete range of drilling and mining services. We are an organisation committed to embracing and developing a diverse workforce so that they develop to realise their full potential, and provide you with the ability to make an impact with the next generation of mineral exploration drilling company. With our footprint continuing to expand we are looking for a dedicated and professional Group Mining Engineer.<br> Position: Mining Engineer Location: Marsa Allam Egypt (20 days on site and 10 days off rotation)<br>The Mining Engineer tracks daily site performance, oversees complete drill-and-blast operations, and conducts key technical analyses like haul profiling and ramp planning. The role ensures commercial precision by managing volume reconciliations, SMU metrics, and distance variations to support client invoicing. Ultimately, it serves as the critical operational bridge aligning field crews, internal leadership, and client representatives<br>Job Requirements and Duties<br>Gathering operation data for the day before from all departments (dispatch, mining, survey, drilling, and blasting) and evaluating a report to be sent to Capital (internal) and SGM (Client) side by the early morning A daily breakdown sheet is generated from the dispatch date and sent to the Capital maintenance teamin the early morning to track availability and utilization Daily broken, blasted stock is calculated and to be reported to the Capital operation team, management,and to the SGM (Client). Manage visitor arrangements, meeting rooms and workspace availability Daily haul analysis is done by generating haul profiles for all the loading fleets we have to the dump areas, and it’s sent to the Capital operation team, management, and to SGM (Client) Daily performance review for all operations, including mining and drilling, is generated in one sheet to track our gains and losses for the previous day, and it’s sent to the Capital team and management Weekly SMU sheet, including the material moved by the bench, drilled meters, and machine hours,is to be reported to the commercial manager and the capital operations team Weekly volume reconciliation is to be sent to surveyors by the bench to calculate the actual truck factor The monthly report is done after gathering data from all departments and adding the mining data for the month before submitting it to the management Monthly haul profile is to be sent to the commercial manager, including all haul distances for the month, including the variance to claim invoice upon it Monthly SMU sheet to be sent to the commercial manager, including the material moved by the bench, drilled meters, and machine hours Monthly volume reconciliation is done upon the actual surveyed volume and amending the production figures according to it Send a record of authorized daywork carried out on the previous day, including any use of the principal’s mining equipment, to be submitted to the client and finance team if required Blast designs are to be done on a regular basis and are to be sent to the client for approval in case of (Trim shots – Edge shots – Presplits) Communicating approved blast designs with the survey team, mining team, drilling team, and blastingcrew to let all parties get their tasks done in order to achieve the design and get it drilled and blasted. Daily pit inspection is done to check the drill patterns needed to be blasted and that it has no issues Discuss any issues regarding drill and blast with the blast crew, D&B superintendent, mining team, and GM to find a better solution to increase our productivity Review and approve the blasting tie-ups and explosives quantities before blasting Set a weekly clean-up plan for all drilling areas and constructed drill temp ramps to be done and attached to the weekly plan meeting Weekly blast review to be done for the previous week, highlighting the blast quality, any major issues, and how we can eliminate them Communicate with the client in case we need to add more rigs to the weekly fleet or use them to drill in the client area Weekly blasting strings are to be sent to the Blast crew, survey team, and to the client with the agreed blasting sequence to plan accordingly for tie-ups or pattern clean-ups and mark-ups Attend the daily and weekly meetings Regular check for the quality during charging the shots Attend Blast master review meetings for each bench and discuss with the Blast crew department before submitting to the client Carry out any tasks requested by the direct manager.<br>Education Required<br>Bachelor of Engineering<br>Experience and skills Required<br>Minimum 2 to 5 years of experience in same field Proficient in Microsoft Office (Word, Excel, Power Point, Outlook) comfortable learning new systems and tools Calm, adaptable and solutions-focused, with good judgement under pressure and tight timelines A proactive, can-do attitude and strong attention to detail<br>Please note that this job work conditions require 20 days on site and 10 days off rotation<br>Check out www.capdrill.comIf you think you have what it takes, please apply directly to job advertisement or send your resume to HR. Sukari@capdrill.com<br>Capital Limited is an equal opportunity employer, and we encourage everyone to apply. The Company reserves the right:1. To contact only the best qualified candidates to participate in the selection exercise.2. Not to make any appointment following this advertisement.
Regina Hotels Group in Hurghada and Sokhna is seeking an execution architect, not a civil engineer. Experience of no less than 5 to 10 years is required, preferably in the hotel industry. Experience in finishing and construction is necessary. Work location is in Hurghada and Sokhna. The company's main headquarters is in Heliopolis. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning shift only</li><li>Benefits: Health insurance, social insurance, meals, accommodation</li></ul>
Regina Hotels Group Hurghada and Sokhna is looking for an architectural execution engineer, not a civil engineer. Experience of no less than 5 to 10 years is required, preferably in the hotel industry. Experience in finishing and construction is required. Work location is in Hurghada and Sokhna. The company's main headquarters is in Heliopolis. <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 3</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance, meals, accommodation</li></ul>
Job Title: Heavy Equipment Mechanic Work Location: Sukari Gold Mine Site - Marsa Alam Department: Mobile Maintenance Department Contract Type: Full-time, Permanent Contract Work Schedule (Shifts): Roster system (20 days on / 10 days off) Job Purpose: To perform planned (preventive) and unplanned (breakdown) maintenance activities during the daily shift safely and effectively. This field technical role focuses on high-quality inspection, troubleshooting, and repairing the mobile heavy equipment fleet to improve Mean Time Between Failures (MTBF) and deliver results that meet quality standards and company expectations. Key Duties and Responsibilities: - Advanced Inspection and Predictive Maintenance: Perform accurate and comprehensive inspection of heavy equipment (including lifting parts, sticks, buckets, structural tires, and undercarriages) to ensure defects are detected and reported to supervisors before major operational failures occur. - Work Order Diagnosis: Record accurate and comprehensive information using standard processes for work requests and breakdown notifications to facilitate precise maintenance planning and execution. - Prioritizing Tasks: Prioritize identified maintenance tasks based on potential risks to Health, Safety, and Environment (HSE) and the equipment's operational readiness. - Shift Handover Coordination: Actively participate in daily pre-start meetings and shift handovers to discuss ongoing works, updates, mining plan changes, and potential safety hazards with the relief crew. - Maintenance Execution and Quality: Assemble all specialized tools, spare parts, and technical documents required before starting the task. Execute mechanical repairs to the highest quality standards with the goal of zero re-work. - Testing and Commissioning: Rigorously test and commission equipment after repairs to verify that all hydraulic or mechanical faults have been resolved, and ensure maintenance efficiency before returning the equipment to service ready and fit for purpose. - Commitment to Safety and Isolation Systems: 100% strict adherence to all site and company requirements regarding work permits, risk assessment, Lock-out/Tag-out, and general risk management to maintain a Zero Harm work environment. - Documentation and Housekeeping: Fully complete all technical maintenance documentation (including preventive maintenance forms and inspection logs) and record actual findings. Clean and classify major components requiring repair, return unused spare parts to stores, report damaged tools, and maintain an optimally clean and organized workspace. Requirements and Qualifications: Education: Official certificate or diploma in mechanical maintenance or equivalent recognized technical and vocational training qualifications. Driver's License: Applicants must hold a valid driver's license. Work Experience: Minimum of two (2) years of experience (post-graduation/qualification) in the heavy equipment, heavy transport, or heavy construction sector. Selection Priority (High Priority): Priority in search strategies will be given to candidates with proven technical experience in dealing with heavy earthmoving equipment, especially excavators and large shovels. (Prior gold mine experience is not required). Technical and Professional Skills: Proven ability to drive vehicles, operate equipment and machinery, and guide support equipment safely. Solid practical understanding of Caterpillar equipment, heavy machinery systems, and their inspection and diagnostic software. Comprehensive knowledge of high-pressure hydraulic systems is highly preferred. Proven ability to read, interpret, and troubleshoot using technical service manuals, schematics, and maintenance guides. Strong and independent problem-solving and mechanical fault-finding skills. <p><strong>Additional Details</strong></p> <ul> <li>Number of Vacancies: 5</li> <li>Shift System: Day and Night shifts</li> <li>Driver's License: First Class</li> <li>Benefits: Health insurance, social insurance, transport allowance, meals, accommodation, overtime</li> </ul>
Job Title: Heavy Equipment Mechanic Work Location: Sukari Gold Mine Site - Marsa Alam Department: Mobile Maintenance Department Contract Type: Full-time, Permanent Contract Work System (Shifts): Roster system (20 days on / 10 days off) Job Purpose: To perform planned (preventive) and unplanned (breakdown) maintenance activities during the daily shift safely and effectively. This technical field role focuses on performing high-quality inspections, troubleshooting, and repairing the mobile heavy equipment fleet to improve Mean Time Between Failures (MTBF) and deliver results that meet quality standards and company expectations. Key Duties and Responsibilities: -Advanced Inspection and Predictive Maintenance: Perform accurate and comprehensive inspections of heavy equipment (including lifting parts, sticks, buckets, structural frames, and undercarriages) to ensure defects are identified and reported to supervisors before major operational failures occur. -Work Order Diagnosis: Record accurate and comprehensive information using standard processes for work requests and breakdown notifications to facilitate precise maintenance planning and execution. -Task Prioritization: Prioritize identified maintenance tasks based on potential risks to Health, Safety, and Environment (HSE) and equipment operational readiness. -Shift Handover Coordination: Actively participate in daily pre-start meetings and shift handovers to discuss ongoing work, updates, changes in mining plans, and potential safety hazards with the relief crew. -Maintenance Execution and Quality: Assemble all specialized tools, spare parts, and technical documentation required before starting the task. Execute mechanical repairs to the highest quality standards with a target of zero re-work. -Testing and Commissioning: Rigorously test and commission equipment after repairs to verify that all hydraulic or mechanical faults have been addressed, ensuring maintenance efficiency before returning the equipment to service ready and fit for purpose. -Safety and Isolation Compliance: Strict 100% adherence to all site and company requirements regarding work permits, risk assessments, equipment isolation (Lock-out/Tag-out), and general risk management to maintain a Zero Harm work environment. -Documentation and Housekeeping: Fully complete all technical maintenance documents (including preventive maintenance forms and inspection logs) and record actual findings. Clean and classify major components requiring repair, return unused spare parts to the warehouse, report damaged tools, and maintain an optimally clean and organized workspace. Requirements and Qualifications: Education: Official certificate or diploma in mechanical maintenance or equivalent recognized technical and vocational training qualifications. Driving License: The applicant must hold a valid driving license. Experience: At least two (2) years of experience (post-graduation) in the heavy equipment, heavy transport, or heavy construction sector. Selection Priority (Top Priority): Priority in search strategies will be given to candidates with proven technical experience in handling heavy earth-moving equipment, particularly excavators and large shovels. (Previous gold mine experience is not required). Technical and Professional Skills: Proven ability to drive vehicles, operate equipment and machinery, and safely direct support equipment. Strong working knowledge of Caterpillar equipment, heavy machinery systems, and their associated inspection and diagnostic software. Comprehensive knowledge of high-pressure hydraulic systems is a highly preferred advantage. Proven ability to read, interpret, and troubleshoot using technical service manuals, schematics, and maintenance guides. Strong and independent problem-solving and mechanical fault-finding skills. <p><strong>Additional Details</strong></p> <ul> <li>Number of Vacancies: 5</li> <li>Shift System: Day and Night shifts</li> <li>Driving License: First Class (Heavy Duty)</li> <li>Benefits: Medical insurance, social insurance, transportation allowance, meals, accommodation, overtime pay</li> </ul>
<strong>Company Description</strong> JAZ Hotel Group is the hospitality arm of Travco Group International, Egypt’s largest travel conglomerate, and offers distinctive stays across a variety of destinations. The group focuses on thoughtfully designed experiences that emphasize warmth, comfort, and authentic service. Through brands such as JAZ Elite, JAZ, and JAZ Neo, JAZ Hotel Group caters to a wide range of guest preferences, from serene retreats to vibrant, contemporary escapes. Each property is crafted to provide personal, memorable experiences that reflect the unique character of its location. Team members join a culture committed to exceptional service and continuous improvement in guest satisfaction.<br><strong>Role Description</strong> The Assistant Chief Engineer is a full-time, on-site position based in Hurghada, supporting the overall operation and maintenance of the hotel’s engineering and maintenance functions. This role assists in planning, coordinating, and supervising preventive and corrective maintenance for mechanical, electrical, plumbing, HVAC, and building systems to ensure safety, efficiency, and minimal downtime. The Assistant Chief Engineer collaborates with the Chief Engineer to monitor energy usage, implement cost-effective solutions, and maintain compliance with local regulations and company standards. Daily responsibilities include supervising engineering team members, assigning tasks, conducting inspections, responding to guest and operational maintenance requests, and maintaining accurate records of maintenance activities and inventories. The role also participates in project implementation, equipment upgrades, and continuous improvement initiatives to support optimal guest comfort and smooth hotel operations.<br><strong>Qualifications<br></strong> <br><ul><li>Strong technical knowledge in hotel engineering systems, including mechanical, electrical, plumbing, HVAC, and building maintenance.</li><li>Experience in supervising maintenance teams, coordinating schedules, and overseeing contractors or service providers.</li><li>Ability to apply preventive and corrective maintenance practices, troubleshoot issues, and implement practical solutions.</li><li>Awareness of safety, health, and environmental standards, with commitment to regulatory compliance and safe work practices.</li><li>Effective communication and interpersonal skills for collaborating with cross-functional hotel teams and interacting with guests when needed.</li><li>Proficiency in using maintenance management tools or software and maintaining clear documentation and reports.</li><li>BSc in engineering (mechanical or electrical); hospitality or facility management experience is an advantage.</li><li>Previous experience in a similar engineering leadership role within hotels or large facilities is strongly preferred.</li><li>Ability to work flexible hours, respond to emergencies, and support operations during peak periods.</li><li>Commitment to continuous improvement, energy efficiency, and high standards of guest comfort and service.</li></ul>
<strong>A Snapshot of Your Day<br><br></strong>As a Mechanical Engineer at Siemens Energy, you will target experienced professionals with a strong background in mechanical maintenance within the power generation sector. You will engage in meaningful projects, such as optimizing maintenance strategies for critical mechanical equipment, which directly impacts plant reliability and operational efficiency. Expect a collaborative team culture that values mentorship and innovation, driving Siemens Energy’s mission to provide sustainable energy solutions.<br><br><strong>How You’ll Make An Impact<br><br></strong><ul><li>Plan, schedule, and oversee preventive, predictive, and corrective maintenance activities for mechanical systems.</li><li>Utilize CMMS to manage work orders and optimize maintenance programs.</li><li>Lead root cause analysis for complex mechanical failures and implement corrective actions.</li><li>Manage small-to-medium scale maintenance projects, ensuring timely and budget-compliant completion.</li><li>Liaise with cross-functional teams to coordinate repair work and minimize production impact.</li><li>Provide technical coaching and mentorship to junior engineers and technicians.<br><br><br></li></ul><strong>What You Bring<br><br></strong><ul><li>Bachelor’s degree in Mechanical Engineering or a related technical field.</li><li>5-8 years of experience in mechanical maintenance within power generation or heavy industrial environments.</li><li>Proven experience in preventive and predictive maintenance strategies.</li><li>A background in water treatment is preferred.</li><li>Proficiency in Computerized Maintenance Management Systems (CMMS).</li><li>Strong analytical and troubleshooting skills for complex technical problems.</li><li>Ability to lead projects and mentor team members effectively.<br><br><br></li></ul><strong>About The Team<br><br></strong>Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.<br><br><strong>Who is Siemens Energy?<br><br></strong>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br><strong>Our Commitment to Diversity<br><br></strong>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br><strong>Rewards/Benefits:<br><br></strong><ul><li>Competitive Salary Package</li><li>Targeted Bonus</li><li>Opportunities to work on a variety of innovative projects<br><br><br></li></ul>https://jobs.siemens-energy.com/jobs<br><br>
<p><strong>Company Description</strong> Coltri Compressor Egypt is a specialist provider of high-performance air compression solutions, serving clients in industrial, marine, and recreational sectors. The company focuses on delivering reliable equipment, technical expertise, and after-sales support tailored to customer requirements. Operations emphasize safety, quality, and adherence to international standards. Team members collaborate closely with clients and partners to design efficient, cost-effective solutions that support long-term operational performance.</p><p><strong>Role Description</strong> The Tendering Engineer is a full-time, on-site role based in Hurghada. This role is responsible for preparing competitive technical and commercial offers, including detailed quotations and cost breakdowns for air compressor projects and related services. Typical tasks include reviewing tender documents, analyzing technical specifications, coordinating with procurement to obtain supplier offers, and ensuring compliance with customer and regulatory requirements. The Tendering Engineer will collaborate with sales, engineering, and operations teams to clarify scopes, optimize solutions, and meet submission deadlines. The role also involves maintaining tender documentation, updating pricing databases, and supporting negotiations by providing accurate technical and financial information.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Candidates should possess strong skills in preparing quotations and commercial offers, with attention to detail and cost accuracy.</li><li>Candidates should possess solid analytical skills for evaluating technical specifications, project requirements, and cost structures.</li><li>Candidates should possess effective communication skills for coordinating with internal teams, suppliers, and clients.</li><li>Candidates should possess procurement-related skills, including sourcing suppliers, comparing bids, and supporting purchasing decisions.</li><li>Candidates should possess knowledge in electrical engineering or a closely related engineering discipline, preferably with exposure to compressors or industrial equipment.</li><li>Relevant qualifications such as a bachelor’s degree in engineering (electrical or mechanical preferred) or equivalent technical education.</li><li>Proficiency in MS Office (especially Excel and Word) and familiarity with ERP or tender management tools is beneficial.</li><li>Ability to work on-site in Hurghada, manage multiple tenders simultaneously, and meet strict deadlines.</li><li>Experience in tendering, sales engineering, or project estimation in industrial or marine sectors is an advantage.</li><li>Strong organizational skills, problem-solving mindset, and commitment to ethical, non-discriminatory professional conduct.</li></ul>
<strong>Industry: Marine Services & Gyro Stabilization Systems<br><br></strong>We are looking for a motivated and technically skilled <strong>Marine Sales Engineer</strong> to join our team in the marine services and equipment industry.<br><br>The ideal candidate will have a strong engineering background, hands-on experience with marine equipment installation, and the ability to develop customer relationships and support sales activities.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Promote and sell marine equipment, services, and gyro stabilizer systems</li><li>Conduct sales calls, meet potential clients, and develop new business opportunities</li><li>Understand customers' technical requirements and recommend suitable marine solutions</li><li>Coordinate and support the installation, commissioning, and servicing of marine equipment</li><li>Provide technical assistance and guidance to customers during and after installation</li><li>Prepare technical and commercial quotations and follow up on sales opportunities</li><li>Coordinate with the technical team to ensure successful project execution</li><li>Maintain strong relationships with boat owners, yacht operators, shipyards, and marine industry professionals<br><br></li></ul><strong>Requirements<br><br></strong><strong>Requirements<br><br></strong><ul><li>Bachelor's degree in Mechatronics Engineering</li><li>Minimum 3 years of experience in the marine and boating industry</li><li>Previous hands-on experience with marine equipment installation and commissioning</li><li>Good technical understanding of marine systems and equipment</li><li>Experience or strong capabilities in technical sales and customer communication</li><li>Ability to conduct sales calls, negotiate, and follow up with potential clients</li><li>Strong communication, presentation, and problem-solving skills</li><li>Willingness to travel to marinas, shipyards, and customer sites when required<br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Knowledge of yacht and boat mechanical and electrical systems</li><li>Experience working with marine equipment suppliers, dealers, or service providers</li></ul>
Role Purpose <p>To manage the procurement cycle for construction materials, equipment, and subcontracted services in alignment with project requirements, timelines, and budgets. The Senior Procurement Engineer ensures the timely and cost-effective sourcing of quality materials while maintaining compliance with company policies and contractual obligations.</p> Key Accountabilities <ul> <li> <ul> <li>Review project specifications and material requirements in coordination with engineering and planning teams.</li> <li>Prepare procurement strategies and material procurement plans based on project schedules.</li> <li>Issue RFQs (Request for Quotations), evaluate supplier offers technically and commercially, and participate in negotiation and vendor selection.</li> <li>Create and process purchase orders in the ERP system (e.g., SAP), ensuring timely delivery to sites.</li> <li>Develop and maintain a reliable vendor database, conduct supplier assessments, and maintain strong supplier relationships.</li> <li>Track and monitor material deliveries, ensuring alignment with project timelines and reporting any delays or issues.</li> <li>Coordinate with warehouse, logistics, and finance teams to manage delivery, invoicing, and payment cycles.</li> <li>Support contract review and negotiation for key material and subcontract procurement.</li> <li>Ensure compliance with internal procurement policies and procedures, and support audit requirements.</li> </ul> </li> </ul> <p> </p> Qualifications, Experience, Knowledge & Skills <ul> <li>Bachelor’s degree in engineering (Civil, Mechanical, or Electrical).</li> <li>From 2 years of experience in procurement within the construction industry, including site and head office exposure.</li> <li>Solid understanding of construction materials, equipment, and subcontracting practices.</li> <li>Strong negotiation, communication, and analytical skills.</li> <li>Proficiency in Microsoft Office and ERP systems (SAP is highly preferred).</li> <li>Knowledge of local and international market suppliers and import/export procedures.</li> <li>High attention to detail, time management, and decision-making abilities.</li> </ul> <p>Knowledge of FIDIC and contract terms is a plus.</p>
<ul><li><p>Monitor and inspect all mechanical and electrical construction and installation activities to ensure compliance with approved drawings, technical specifications, and applicable codes and standards.</p></li><li><p>Review MEP shop drawings, material submittals, equipment data sheets, method statements, and technical documents from the Owner's perspective.</p></li><li><p>Inspect electrical installations, including power distribution, lighting, low-current systems, cable trays, conduits, wiring, panels, earthing, and lightning protection.</p></li><li><p>Inspect mechanical installations, including HVAC, ductwork, plumbing, drainage, firefighting, water supply, pumps, piping, and mechanical equipment.</p></li><li><p>Verify the quality, specifications, installation methods, and compliance of MEP materials and equipment delivered to site against approved submittals.</p></li><li><p>Monitor and verify MEP installation activities, ensuring proper routing, sizing, alignment, connections, supports, accessibility, and coordination with other disciplines.</p></li><li><p>Review and verify MEP testing procedures and results, including electrical insulation and continuity tests, earthing tests, pressure tests, leakage tests, flushing, and equipment performance tests.</p></li><li><p>Identify MEP installation defects, technical deviations, and non-conformities, and issue documented observations and corrective action requests.</p></li><li><p>Follow up on contractor corrective actions and verify the proper rectification and closure of identified defects.</p></li><li><p>Coordinate with structural and architectural engineers to resolve MEP interfaces, prevent design clashes, and minimize construction rework.</p></li><li><p>Monitor MEP construction progress against the approved project schedule and report technical constraints, material-related issues, and potential delays to Head Office.</p></li><li><p>Follow up on MEP pre-commissioning, commissioning, and functional testing activities to verify system readiness and compliance with project requirements.</p></li><li><p>Maintain accurate and updated inspection records, testing reports, approved submittals, site observations, and non-conformance logs.</p></li><li><p>Prepare and submit regular MEP progress and quality reports to Head Office, highlighting quality issues, technical risks, and required corrective actions.</p></li><li><p>Participate in final MEP inspections, snagging, and verification of completed systems prior to project handover.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor's degree in <strong>Mechanical or Electrical Engineering</strong>.</p></li><li><p>Minimum 6–9 years of experience in MEP construction, installation, and site supervision, preferably in real estate, residential, hospitality, or mixed-use development projects.</p></li><li><p>Strong technical knowledge of both mechanical and electrical building services, including HVAC, plumbing, drainage, firefighting, power distribution, lighting, and low-current systems.</p></li><li><p>Good understanding of Egyptian Building Codes and relevant international standards, including applicable IEC, NFPA, and ASHRAE standards.</p></li><li><p>Proven experience in reviewing MEP drawings, shop drawings, technical specifications, material submittals, and method statements.</p></li><li><p>Practical experience in MEP inspection procedures, quality control documentation, testing, and commissioning activities.</p></li><li><p>Ability to identify MEP design and installation discrepancies and coordinate technical resolutions across different engineering disciplines.</p></li><li><p>Proficiency in AutoCAD, Microsoft Office, and construction reporting tools.</p></li><li><p>Strong technical reporting, coordination, analytical, and problem-solving skills.</p></li><li><p>Good communication skills and the ability to professionally represent the Owner when dealing with contractors and other project stakeholders.</p></li><li><p>To be <strong>Hurghada resident</strong> is preferred.</p></li></ul><p></p>
<strong>Job Summary:<br><br></strong>The Infrastructure Support Engineer is responsible for delivering technical services related to enterprise computing infrastructure at customer premises. The role includes implementing, integrating, administering, monitoring, troubleshooting, and supporting enterprise infrastructure solutions while ensuring high-quality service delivery and customer satisfaction.<br><br>The engineer will work closely with implementation teams and project managers to deploy and maintain virtualization, backup, and Microsoft infrastructure solutions, ensuring system availability, performance, and operational excellence.<br><br><strong>Accountability & Responsibilities:<br><br></strong><ul><li> Install, configure, and support enterprise computing infrastructure solutions.</li><li> Deploy and manage Dell VxRail infrastructure.</li><li> Install, configure, and administer VMware ESXi, vCenter, and NSX environments.</li><li> Configure and manage Exa Grid Storage solutions.</li><li> Install, configure, and maintain Veeam Backup & Replication (On-Premises & Cloud).</li><li> Administer Microsoft infrastructure services, including:</li><li>Active Directory</li><li>DNS</li><li>DHCP</li><li>Group Policy (GPO)</li><li>WSUS</li><li> Manage VxRail hosts, virtual machines, and virtualization resources.</li><li> Monitor infrastructure health, system performance, and storage utilization.</li><li> Perform preventive maintenance and health checks on servers, storage, and virtualization platforms.</li><li> Troubleshoot hardware issues related to servers and storage systems.</li><li> Troubleshoot software issues related to VMware, Microsoft infrastructure, and backup solutions.</li><li> Create and maintain infrastructure and network diagrams using Microsoft Visio.</li><li> Prepare technical documentation, implementation reports, and "As-Built" documentation.</li><li> Provide technical recommendations and guidance regarding infrastructure improvements.</li><li> Support implementation activities and coordinate with Project Managers during project execution.</li><li> Follow up and update customer service requests through internal ticketing systems.</li><li> Ensure compliance with company standards, security policies, and customer requirements.</li><li> Deliver professional technical support while maintaining high customer satisfaction<br><br></li></ul><strong>Required Experience:<br><br></strong><ul><li> Bachelor’s degree in computer science, Computer Engineering, Electronics Engineering, Information Technology, or an equivalent discipline.</li><li> Minimum 3 years of experience as a Systems Engineer or Infrastructure Engineer.</li><li> Hands-on experience with:</li><li>Dell VxRail</li><li>VMware ESXi</li><li>VMware vCenter</li><li>VMware NSX</li><li>Veeam Backup & Replication</li><li>Microsoft Domain Controller</li><li> Strong knowledge of:</li><li>Active Directory</li><li>DNS</li><li>DHCP</li><li>Group Policy (GPO)</li><li>WSUS</li><li>Good understanding of virtualization technologies and enterprise infrastructure.</li><li>Basic network troubleshooting skills.</li><li>Basic knowledge of project management concepts.</li><li>Experience working within technical implementation and support teams.</li><li>Good knowledge of Microsoft Visio for creating infrastructure and network diagrams.</li><li>Excellent analytical and troubleshooting skills.</li><li>Ability to analyze and resolve complex technical issues.</li><li>Strong customer service orientation.</li><li>Excellent interpersonal and communication skills.</li><li>Ability to work collaboratively with internal teams and customers.</li><li>Ability to work under pressure and meet deadlines.</li><li>Strong organizational and documentation skills.</li><li>Presentable with a professional attitude.</li><li>Strong problem-solving skills.</li><li>Good command of spoken English.</li><li>Excellent written English skills.</li></ul>
<p><strong><em>Core Responsibilities</em></strong></p><ul><li><p><strong>Tank Repair:</strong> Scope out tank repairs, perform Fitness-for-Service (FFS) assessments, and design shell insert plates and nozzle modifications in accordance with <strong>API 653 & API 650</strong>.</p></li><li><p><strong>Welding & NDT Management:</strong> Review Welding Procedure Specifications (WPS/PQR) per <strong>ASME Section IX</strong>; oversee Radiographic (RT), Ultrasonic (UT), and Vacuum Box testing.</p></li><li><p><strong>Field Execution:</strong> Supervise site crews executing tank bottom replacements, shell patching, and jacking operations.</p></li><li><p><strong>Blasting & Coating QA/QC:</strong> Manage surface preparation (SSPC-SP 10/SP 6) and internal lining/painting applications per <strong>API 652</strong>.</p></li></ul><p></p><p><strong>Requirements</strong></p><p><strong><em>Qualifications Required</em></strong></p><ul><li><p><strong>Education:</strong> Bachelor’s Degree in Mechanical, Structural, or Metallurgical Engineering.</p></li><li><p><strong>Experience:</strong> 3+ years of direct experience in refinery, terminal, or pipeline tank repair projects.</p></li><li><p><strong>Technical Standards:</strong> Strong knowledge of API 653, API 650, API 652, ASME Sec V & IX, and SSPC/NACE standards.</p></li></ul><p></p><p><strong><em>Duration</em></strong></p><ul><li><p>About two months at least</p></li></ul><p></p><p><strong><em>Site location</em></strong></p><ul><li><p>Ras Gharib</p></li></ul><p></p>
Long Hole Operator<br> <br> <br>Sukari is located approximately 750km from Cairo and 25km from Marsa Alam on the Red Sea. First gold was poured in June 2009 and commercial production began in April 2010, making Sukari the first modern gold mine in Egypt, a country which in ancient times was a prolific producer of the precious metal. Sukari conducts both open-pit and underground mining operations, each employing specialized mining methods tailored to the orebody characteristics and operational requirements.<br> <br>Location: On-site in Marsa Alam Contract Type: Permanent, full-time Schedule: 6 weeks/ 3 weeks working roster Compensation: Competitive salary and comprehensive benefits package <br>The Role<br> <br>Operate mechanized long hole drilling equipment in underground production areas to drill blast holes to approved designs. You will be responsible for achieving planned meters and hole quality while applying strict site critical controls and equipment care standards to enable safe, compliant, and efficient blasting and ore extraction.<br> <br> <br>The Key Responsibilities<br> <br>Pre-start Inspection & Drill Rig Readiness: Perform pre-start checks on long hole drill rigs (e.g., Sandvik/Epiroc class) to confirm mechanical, hydraulic, electrical, and safety systems. Report defects and isolate equipment when unsafe. Drill Set-up & Collar Control: Position and level the drill on marked collars according to plans to achieve specified burden, spacing, and standoff while minimizing deviation. Production Drilling Execution: Drill long holes to approved patterns, depths, and orientations. Optimize drilling parameters (feed, rotation, flushing) to maintain penetration rates while protecting ground stability and consumables. Hole Quality Verification: Check hole depth, deviation, and breakthrough conditions. Identify poor ground conditions, mark/communicate mis-drilled or hazardous holes, and take corrective actions. Data Recording & Handover: Record drilled meters, hole IDs, downtime, and consumable usage in dispatch/production log systems. Complete detailed shift handovers. Basic Maintenance & Housekeeping: Perform routine cleaning, greasing, and bit/rod replacements within operator scope. Maintain clean and hazard-free work areas. Safety & Compliance: Apply underground critical controls (ground control, isolation/LOTO, mobile equipment interaction, and energy controls). Complete pre-task risk assessments and maintain required PPE. <br>The Requirements<br> <br>Experience: Over 15 years of total operational experience, with a minimum of 10 years dedicated to underground production long hole drilling on mechanized rigs within hard-rock mining and Epiroc Easer . Education & Certifications: Secondary School Certificate (or equivalent) with recognized underground mining operator training. Certified Long Hole Drill Operator training is preferred. Technical Expertise: Demonstrated capability in drill plan interpretation, rig positioning, collaring, deviation control, parameter optimization, and basic equipment troubleshooting. Language Skills: proficiency in English. Fitness & Medical: Must be medically fit for underground work, capable of managing physical demands (walking on uneven ground, manual handling of drill bits/rods), and working in conditions involving dust, noise, vibration, and heat
Receive email alerts for Electromechanical Engineer Jobs jobs
You can cancel your email alert at anytime