Technical Analysts Jobs - Port Said Egypt
26 Jobs Found
Save and set alert for similar positionsManage alerts
Job Title: Paint Quality TechnicianDepartment: Quality / Total Quality Management (TQM)Job Objective:Inspect surface preparation and painting works, ensuring compliance with approved technical specifications, coating quality requirements, and corrosion protection standards.Tasks and Responsibilities:Inspect surfaces before painting and ensure readiness according to specifications.Inspect paint quality and detect defects, such as peeling, bubbles, color inconsistency, and uneven paint thickness.Ensure adherence to approved paint specifications and required coating layers.Measure paint layer thickness using specialized measuring devices, in accordance with inspection procedures.Verify surface cleanliness and environmental application conditions when required.Record inspection results and prepare defect and non-conformance reports.Follow up on the repair of paint defects and perform re-inspections.Ensure painted parts are protected from damage during manufacturing and assembly stages.Required Qualifications:Industrial technical diploma in paints, chemistry, mechanics, or a related industrial field.Experience in industrial paints or coating inspection is preferred.Familiarity with paint thickness measuring devices and surface inspection methods is preferred.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 10</li><li>Shift system: Morning shift only</li><li>Benefits: Health insurance, social insurance, transportation allowance, meals, accommodation, overtime hours</li></ul>
Job Title: Mechanical Installation Quality Technician Department: Quality / Total Quality Management (TQM) Job Objective: Inspect mechanical installation works and ensure that components and parts are installed according to engineering drawings, work instructions, and approved technical specifications. Tasks and Responsibilities: Inspect the installation of mechanical components and parts inside railway vehicles. Ensure that the locations, orientations, and dimensions of components comply with the approved drawings. Inspect the installation of doors, seats, panels, fasteners, and other components, as per the scope of work. Verify the integrity of installation, fastening, and required torque for bolts when specified. Detect missing parts, incorrect installation, or non-compliance of components with specifications. Use appropriate measuring tools to verify dimensions, clearances, and alignment. Record inspection results and report non-conformities. Follow up on defect correction and re-inspection before accepting the work. Participate in assembly quality inspection during manufacturing stages and final inspection. Required Qualifications: Industrial technical diploma in mechanics, production, or manufacturing. Experience in mechanical installations or industrial assembly is preferred. Ability to read engineering drawings and use measuring tools. <p><strong>Additional Details</strong></p> <ul> <li>Number of vacancies: 10</li> <li>Shift system: Morning only</li> <li>Benefits: Health insurance, social insurance, transportation allowance, meals, accommodation, overtime hours</li> </ul>
A car painter is required at Al-Rawas Motors maintenance center.<p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: Morning only</li><li>Benefits: Health insurance, social insurance, accommodation, overtime</li></ul>
Department: Quality / Total Quality Management (TQM) Work Location: NIRC Factory, East Port Said Direct Supervisor: Quality Supervisor Tasks and Responsibilities: Inspecting welding joints and metal structures according to approved drawings and specifications. Ensuring the quality of welding and its freedom from visible defects. Detecting welding defects, such as cracks, porosity, incomplete fusion, and irregularities in joints. Reviewing weld dimensions and ensuring compliance with specified technical requirements. Ensuring adherence to approved welding procedures, according to the required inspection scope. Recording inspection results and preparing reports on defects and non-conformity cases. Monitoring defect repairs and re-inspecting before accepting the work. Coordinating with production and quality teams to address technical issues. Required Qualifications: Industrial Technical Diploma specializing in welding, mechanics, or metal forming. Previous experience in welding inspection or metal structure fabrication is preferred. Ability to read engineering drawings and use basic measuring tools. <p><strong>Additional Details</strong></p><ul><li>Number of Vacancies: 10</li><li>Shift System: Morning only</li><li>Benefits: Health insurance, social insurance, transportation allowance, meals, accommodation, overtime hours</li></ul>
<p><strong>IT Network Analyst</strong></p><p>We are seeking a motivated and skilled <strong>IT Network Analyst</strong> to join our IT Infrastructure team. The successful candidate will have hands-on experience with enterprise networking technologies and a solid background in network operations, administration, and troubleshooting.</p><p> </p><p><strong>Key Responsibilities</strong></p><ul><li><p>Support the implementation, monitoring, and maintenance of LAN and WAN infrastructure.</p></li><li><p>Troubleshoot network connectivity, routing, switching, wireless, and firewall-related issues.</p></li><li><p>Assist in the management and support of VoIP systems and network security solutions.</p></li><li><p>Participate in network upgrades, performance optimization, and documentation activities.</p></li><li><p>Monitor network performance and ensure high availability of IT services.</p></li><li><p>Collaborate with internal stakeholders and external vendors to resolve technical issues efficiently.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p></p></li></ul><p><strong>Required Qualifications</strong></p><ul><li><p>Bachelor's degree in Computer Science, Information Technology, Network Engineering, or a related field.</p></li><li><p>1 to 3 years of hands-on experience in network administration and support.</p></li><li><p>Practical experience with:</p><ul><li><p>LAN/WAN technologies</p></li><li><p>Routing and Switching</p></li><li><p>Firewalls and Network Security</p></li><li><p>Wireless Networks</p></li><li><p>VoIP Solutions</p></li><li><p>Cisco Catalyst and Nexus platforms</p></li><li><p>MikroTik routing and networking solutions</p></li></ul></li><li><p>Strong analytical and troubleshooting skills.</p></li><li><p>Good communication skills and the ability to work effectively within a team environment.</p></li></ul><p> </p><p><strong>Certifications</strong></p><ul><li><p><strong>CCNA (Cisco Certified Network Associate)</strong> – Mandatory</p></li><li><p><strong>CCNP (Cisco Certified Network Professional)</strong> – Preferred and considered an added advantage</p></li><li><p>Firewall-related certifications (Fortinet, Palo Alto, Firepower, etc.) – Strong advantage.</p></li><li><p><strong>Preferred Skills</strong></p><ul><li><p>Knowledge of network monitoring and management tools.</p></li><li><p>Understanding of network security best practices.</p></li><li><p>Experience working within an enterprise environment.</p></li></ul></li></ul><p></p>
APM Terminals<br><br>PURPOSE<br><br>APM Terminals is part of Maersk, an integrated transport and logistics company and a global leader in container shipping and ports. As a member of the Project Delivery Team at SCCT, the Electrical Lead is responsible for leading and coordinating the delivery of the electrical package for terminal projects in Port Said, Egypt.<br><br>Working closely with the Project Manager, Project Controls Lead, HSSE Manager, contractors, consultants, terminal stakeholders and other package leads, the Electrical Lead provides technical leadership and site oversight across industrial power distribution, HV/LV systems, substations, transformers, switchgear, protection systems, electrical installation, testing, energisation, commissioning and handover.<br><br>The role is responsible for ensuring electrical works are delivered safely and in accordance with approved scope, schedule, budget, quality, technical requirements and operational objectives. The role will also manage contractors, vendors and technical interfaces with equipment, civil, automation, IT/OT, maintenance and operations.<br><br><strong>Key role: <br><br></strong><strong>Safe & Successful Electrical Delivery <br><br></strong><ul><li>Ensure safe, high-quality delivery of electrical package activities across design, procurement support, installation, testing, energisation, commissioning and handover. </li><li>Drive effective site execution and compliance with project HSSE requirements, approved designs, specifications and applicable electrical standards. <br><br></li></ul><strong>Technical Leadership & Commissioning <br><br></strong><ul><li>Provide technical leadership for HV/LV distribution, substations, transformers, switchgear, protection and control systems and associated industrial electrical installations. </li><li>Lead technical reviews and coordinate FAT, SAT, pre-commissioning, energisation, commissioning, defect resolution and operational acceptance. <br><br></li></ul><strong>Contractor, Interface & Operational Integration <br><br></strong><ul><li>Manage electrical contractors, EPC partners, OEMs, vendors and consultants to achieve project objectives. </li><li>Coordinate electrical interfaces with terminal equipment, civil works, automation, IT/OT, maintenance and operations, supporting operational readiness and reliable handover. <br><br></li></ul><strong>Principal Accountabilities<br><br></strong><strong>Electrical Package Delivery <br><br></strong><ul><li>Lead and coordinate delivery of the electrical package, including design coordination, technical reviews, site installation, testing, energisation, commissioning and handover. </li><li>Ensure electrical systems are delivered in accordance with approved scope, schedule, budget, quality, HSSE and operational requirements. </li><li>Monitor package progress, risks, issues and changes, and drive corrective actions where delivery deviates from approved requirements. <br><br></li></ul><strong>Electrical Engineering & Design Management <br><br></strong><ul><li>Review electrical designs, calculations, single-line diagrams, equipment specifications, layouts, protection philosophies, cable schedules and technical submissions relevant to the project. </li><li>Provide technical oversight for HV/LV systems, substations, transformers, switchgear, power distribution, protection systems, earthing and associated electrical infrastructure. </li><li>Challenge contractor and consultant solutions to ensure they are safe, maintainable, constructible, fit for purpose and aligned with project requirements. <br><br></li></ul><strong>Installation, Site Execution & Quality <br><br></strong><ul><li>Lead day-to-day coordination and oversight of electrical installation works on site. </li><li>Ensure works are executed in accordance with approved drawings, method statements, inspection and test plans, specifications, permits and quality requirements. </li><li>Coordinate site inspections, technical queries, non-conformities, punch lists and corrective actions through to closure. <br><br></li></ul><strong>Testing, Energisation & Commissioning <br><br></strong><ul><li>Coordinate and oversee FAT and SAT activities for electrical equipment and systems. </li><li>Lead readiness reviews for pre-commissioning, energisation and commissioning, including interfaces, permits, documentation, test records and safety prerequisites. </li><li>Ensure defects and outstanding items are resolved and electrical systems are successfully accepted and handed over to operations and maintenance. <br><br></li></ul><strong>Contractor & Vendor Management <br><br></strong><ul><li>Act as the primary day-to-day project representative for electrical contractors, OEMs, vendors, consultants and other suppliers within the package. </li><li>Monitor contractor performance and delivery against technical, contractual, schedule, quality and HSSE commitments. </li><li>Support timely resolution of technical, commercial, contractual and delivery issues affecting the electrical package. <br><br></li></ul><strong>Interface & Integration Management <br><br></strong><ul><li>Coordinate interfaces between electrical infrastructure and equipment, civil works, automation, IT/OT, maintenance and terminal operations. </li><li>Ensure electrical dependencies, assumptions and constraints are identified and managed early enough to protect overall project delivery. </li><li>Support integration of electrical infrastructure with container-handling equipment and terminal systems where applicable. <br><br></li></ul><strong>Safety, Risk & Compliance <br><br></strong><ul><li>Promote visible safety leadership and a strong electrical safety culture across contractors and site activities. </li><li>Ensure appropriate controls are applied for high-risk electrical activities, isolation, energisation and commissioning. </li><li>Identify and manage electrical package risks, opportunities, changes and technical issues in coordination with the Project Manager, HSSE Manager and Project Controls Lead. <br><br></li></ul><strong>Project Controls, Documentation & Handover <br><br></strong><ul><li>Support planning, forecasting, progress reporting, change management and risk management for the electrical package. </li><li>Ensure electrical documentation is maintained and controlled throughout the project lifecycle, including drawings, calculations, test records, commissioning dossiers, equipment documentation and handover records. </li><li>Ensure package deliverables and turnover documentation are complete for project close-out and operational handover. <br><br></li></ul><strong>REPORTING AND SCOPE <br><br></strong><ul><li>Direct Reporting: Project Manager </li><li>Functional collaboration: Project Execution PMO and relevant APM Terminals technical functions </li><li>Geographical Scope: SCCT, Port Said, Egypt <br><br></li></ul><strong>KEY RELATIONSHIPS <br><br></strong><ul><li>Collaborate closely with the Project Manager, Project Controls Lead, HSSE Manager, Civil Package Lead, Equipment Package Lead, IT/OT and Automation leads, Business Integration Team, terminal stakeholders, maintenance and operations. </li><li>Maintain effective working relationships with electrical contractors, EPC partners, OEMs, consultants, vendors and external technical stakeholders. <br><br></li></ul><strong>AUTHORITY <br><br></strong><ul><li>Lead and coordinate electrical package activities within approved project objectives and delegated authority limits. </li><li>Review and challenge electrical technical deliverables and recommend approval of submissions within the project governance framework. </li><li>Require corrective action where safety, quality, technical performance, schedule or compliance requirements are not being achieved. </li><li>Escalate significant risks, delays, electrical safety concerns, technical issues, commercial impacts and interface conflicts to the Project Manager and relevant stakeholders. <br><br></li></ul><strong>Critical Qualifications / Skills / Experience<br><br></strong><strong>Education & Experience <br><br></strong><ul><li>Bachelor's or Master's degree in Electrical Engineering or a closely related engineering discipline. </li><li>Proven experience delivering large-scale industrial electrical projects in ports, terminals, heavy industry, major infrastructure, logistics facilities or comparable industrial environments. </li><li>Hands-on project experience covering electrical installation, site execution, testing, energisation, commissioning and operational handover. </li><li>Experience managing contractors, vendors, consultants and/or EPC partners in a site-based project environment. <br><br></li></ul><strong>Technical Expertise <br><br></strong><ul><li>Strong knowledge of HV/LV electrical systems, substations, transformers, switchgear, protection systems and industrial power distribution. </li><li>Practical exposure to FAT, SAT, pre-commissioning, energisation and commissioning activities. </li><li>Ability to review electrical engineering deliverables and manage technical interfaces across multidisciplinary project teams. </li><li>Working knowledge of project controls, risk management, change management and project reporting. <br><br></li></ul><strong>Leadership & Professional Skills<br><br></strong><ul><li>Strong contractor and stakeholder management capability, with confidence operating in a complex site environment. </li><li>Ability to lead through influence and work effectively within multidisciplinary and multicultural project teams. </li><li>Strong analytical, problem-solving and decision-making capability with a clear commitment to safety, quality and successful project delivery. <br><br></li></ul><strong>Preferred Differentiators<br><br></strong><ul><li>Experience within ports or container terminals. </li><li>Experience with container-handling equipment electrification and electrical interfaces to terminal equipment. </li><li>Knowledge of automation and IT/OT interfaces relevant to industrial or terminal environments. </li><li>Experience delivering electrical works in live or brownfield operational environments. </li><li>Project management certification such as PMP, PRINCE2 or an equivalent recognized credential. <br><br></li></ul>Maersk is committed to a diverse and inclusive workplace, and we embrace different styles of thinking. Maersk is an equal opportunities employer and welcomes applicants without regard to race, colour, gender, sex, age, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation, physical or mental disability, medical condition, pregnancy or parental leave, veteran status, gender identity, genetic information, or any other characteristic protected by applicable law. We will consider qualified applicants with criminal histories in a manner consistent with all legal requirements.<br><br>We are happy to support your need for any adjustments during the application and hiring process. If you need special assistance or an accommodation to use our website, apply for a position, or to perform a job, please contact us by emailing accommodationrequests@maersk.com.
<p>Key Responsibilities:</p><ul><li><p><br>Manage end-to-end procurement activities for technical materials, equipment, spare parts, and engineering services.</p></li><li><p>Develop sourcing strategies, evaluate supplier quotations, negotiate commercial terms, and issue purchase orders.</p></li><li><p>Coordinate with Engineering, Production, Planning, Warehouse, and Quality teams to ensure material availability and compliance with technical specifications.</p></li><li><p>Build and maintain relationships with local and international suppliers while monitoring supplier performance.</p></li><li><p>Track purchase orders, resolve delivery and quality issues, and ensure uninterrupted production.</p></li><li><p>Identify cost-saving opportunities and support continuous improvement initiatives within the procurement function.</p></li><li><p>Ensure all procurement activities comply with company policies, contractual obligations, and project requirements.</p></li></ul><p></p><p><strong>Requirements</strong></p><p>Qualifications:</p><p></p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Supply Chain Management, or a related field.</p></li><li><p>5–8 years of experience in technical procurement within manufacturing, railway, automotive, heavy industry, or EPC environments.</p></li><li><p>Strong negotiation, analytical, and supplier management skills.</p></li><li><p>Experience with ERP systems and Microsoft Office is preferred.</p></li></ul><p></p>
<br><p><strong>Position overview: </strong></p><p><br></p><p>The Project<strong> Manager </strong>is responsible for leading and overseeing construction projects from initiation to successful completion. This role ensures that all project activities are delivered on time, within budget, and in compliance with quality, safety, and regulatory standards. The Project Manager will coordinate closely with internal teams, consultants, contractors, and other stakeholders to achieve project goals and maintain alignment with organizational objectives.</p><p><br></p><p><strong>Key Responsibilities</strong></p><p><br></p><p><strong>Project Planning & Execution</strong></p><ul><li>Lead the full lifecycle of construction projects from concept through to handover.</li><li>Develop comprehensive project plans including scope, schedule, budget, and resource allocations.</li><li>Monitor progress using project management tools and ensure timely delivery of milestones.</li></ul><p><strong>Performance Monitoring & Risk Management</strong></p><ul><li>Track project performance against key metrics and timelines.</li><li>Identify risks and implement effective mitigation strategies to minimize impact on project goals.</li></ul><p><strong>Stakeholder Coordination</strong></p><ul><li>Coordinate with engineering, procurement, and construction teams to ensure seamless workflow and integration.</li><li>Serve as the primary point of contact for clients, consultants, subcontractors, and vendors.</li><li>Resolve technical and operational issues to maintain stakeholder satisfaction.</li></ul><p><strong>Quality & Compliance</strong></p><ul><li>Review and approve technical documentation, design submissions, and change orders.</li><li>Ensure compliance with project specifications, contracts, safety standards, and regulatory requirements.</li><li>Conduct site visits to monitor progress, enforce quality control, and ensure safety compliance.</li></ul><p><strong>Reporting & Communication</strong></p><ul><li>Lead regular project meetings and prepare progress reports for senior management and stakeholders.</li><li>Communicate project status, challenges, and solutions in a clear and timely manner.</li></ul><p><strong>Team Leadership</strong></p><ul><li>Mentor and guide project team members to build technical and managerial capabilities.</li><li>Foster a collaborative working environment and ensure effective knowledge transfer within the team.</li></ul><p><br></p><p><strong>Qualifications & Experience</strong></p><p><br></p><ul><li><strong>Education</strong>:</li><li>Bachelor's degree in civil engineering or a related discipline from an accredited university.</li><li><strong>Experience</strong>:</li><li>Minimum of 15–20 years of experience in construction project management.</li></ul><p>(Oil & Gas, Chemical Building).</p><ul><li>At least 5 years in a leadership role managing large-scale infrastructure.</li></ul><p><strong>Skills & Competencies</strong></p><ul><li><strong>Technical Skills</strong>:</li><li>Proficient in Microsoft Office, AutoCAD, Primavera P6, and construction management software.</li><li><strong>Language Skills</strong>:</li><li>Advanced proficiency in English (written and verbal).</li><li><strong>Soft Skills</strong>:</li><li>Strong leadership, problem-solving, decision-making, negotiation, and communication skills.</li></ul><p><strong>Certifications (Preferred)</strong></p><ul><li>PMP (Project Management Professional)</li><li>PMI-RMP (Risk Management Professional)</li><li>OSHA Safety Certification or equivalent is an asset</li></ul><p><br></p><p><strong>About EDECS:</strong></p><p><br></p><p>EDECS is a leading organization with 30 years of experience in marine constructions, infrastructure, earthworks, and transportation projects in Egypt and Saudi Arabia, employing more than 2,000 employees. The organization provides innovative, sustainable, and cost-effective solutions for a wide range of projects, delivering excellence and meeting the highest standards of quality, safety, and sustainability.</p><p><br></p><p>The organization has a strong presence in logistics projects, including high-speed and light-speed railways, railway stations, and commercial and administrative buildings. The organization also has extensive experience in earthworks, water irrigation, and yacht marinas. EDECS is a trusted partner for employers seeking to make a positive impact on the communities they serve.</p>
<strong>Company Description</strong> Royal Cosmatic is a cosmetic manufacturing company focused on developing and producing high-quality personal care and beauty products. The company combines scientific research with market insights to deliver safe, effective formulations that meet customer expectations and regulatory standards. Working at Royal Cosmatic offers exposure to modern production technologies and quality systems used in the cosmetic industry. Team members collaborate across functions to support innovation, continuous improvement, and sustainable growth.<br><strong>Role Description</strong> This is a full-time, on-site Chemical Engineer role based in Port Said. The Chemical Engineer will design, optimize, and monitor manufacturing processes for cosmetic products, ensuring safety, quality, and regulatory compliance. Daily tasks include developing and scaling formulations, conducting laboratory tests, analyzing production data, and troubleshooting process issues. The role also involves collaborating with production, quality, and R&D teams to improve efficiency, reduce waste, and support new product introductions. The Chemical Engineer will prepare technical documentation, standard operating procedures, and reports, and contribute to continuous improvement initiatives across the plant.<br><strong>Qualifications<br></strong> <ul><li>Candidates should possess strong Analytical Skills to interpret data, evaluate process performance, and solve technical problems.</li><li>Candidates should possess solid Laboratory Skills and familiarity with chemical testing methods relevant to cosmetic products.</li><li>Candidates should possess experience or knowledge of the Chemical Industry, preferably in cosmetics, pharmaceuticals, or related sectors.</li><li>Candidates should possess effective Communication skills to collaborate with cross-functional teams and document technical work clearly.</li><li>Candidates should possess Process Engineering skills, including process design, optimization, scale-up, and troubleshooting.</li><li>Bachelor’s degree or higher in Chemical Engineering or a closely related discipline.</li><li>Understanding of safety, quality, and regulatory standards in manufacturing environments.</li><li>Ability to work on-site in Port Said, manage multiple tasks, and adapt to a fast-paced production setting.</li><li>Proficiency with basic computer tools and, ideally, process modeling or data analysis software.</li><li>Previous experience in cosmetics or personal care manufacturing is an advantage but not required.</li></ul>
<ul><li><p>Perform quality inspections of electrical systems, assemblies, wiring, and components throughout the manufacturing process.</p></li><li><p>Ensure compliance with engineering drawings, technical specifications, customer requirements, and applicable international standards.</p></li><li><p>Conduct incoming, in-process, and final inspections of electrical equipment and installations.</p></li><li><p>Identify, document, and investigate non-conformities and support corrective and preventive actions.</p></li><li><p>Review inspection and test reports to ensure product conformity and traceability.</p></li><li><p>Collaborate with Engineering, Production, and Supply Chain teams to resolve quality-related issues.</p></li><li><p>Participate in internal and external quality audits and support continuous improvement initiatives.</p></li><li><p>Ensure the proper use and calibration of electrical testing and inspection equipment.</p></li><li><p>Maintain quality records and ensure compliance with the company’s Quality Management System (QMS).</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s Degree in Electrical Engineering.</p></li><li><p>Proven experience in Electrical Quality Engineering within the <strong>rolling stock, railway, automotive, or heavy manufacturing industry</strong>.</p></li><li><p>Strong knowledge of electrical systems, wiring, schematics, testing, and inspection techniques.</p></li><li><p>Familiarity with <strong>Quality Management Systems</strong> and international standards such as <strong>ISO 9001 and IRIS</strong> is an advantage.</p></li><li><p>Ability to interpret electrical drawings, specifications, and technical documentation.</p></li><li><p>Strong analytical, problem-solving, and communication skills.</p></li><li><p>Proficiency in <strong>Microsoft Office applications</strong>.</p></li><li><p>Fluency in <strong>English and Arabic</strong>.</p></li></ul><p></p>
<p><strong>Company Description</strong></p><p> </p><p>Menco Group for Industrial Projects & General Contracting was founded in 2008 and operates in the Egyptian market, providing Industrial Projects, Maintenance Services, and General Contracting. The company specializes in full maintenance and integrated projects, including civil, electromechanical, and instrumentation works. With years of experience in planning, engineering, construction, pre-commissioning, commissioning, and start-up activities, Menco Group has developed strong capabilities and highly qualified teams. This expertise allows the company to manage large-scale projects across various industries effectively.</p><p><br></p><p> <strong>Role Description</strong></p><p> </p><p>This is a full-time on-site role for an Electrical Engineer based in Port Said. The Electrical Engineer will be responsible for designing and implementing electrical systems, managing power distribution, and maintaining power systems. The tasks will involve performing calculations, preparing technical drawings, and ensuring compliance with safety and quality standards. The role also includes troubleshooting electrical issues, collaborating with multidisciplinary teams, and supporting construction and commissioning activities.</p><p><br></p><p> <strong>Qualifications</strong></p><p> </p><ul><li>Proficiency in Electrical Design and a solid understanding of Electrical Engineering principles</li><li>Experience working with Power Distribution and Power Systems</li><li>Strong theoretical and practical knowledge of Electricity</li><li>Capability to develop and review technical documents and drawings</li><li>Familiarity with standards and regulations related to electrical systems</li><li>Excellent analytical, problem-solving, and communication skills</li><li>Bachelor’s degree in Electrical Engineering or a related field</li><li>Work experience in an industrial environment is highly desirable</li></ul>
<ul><li><p>Lead the planning, scheduling and field execution of major plant turnarounds, planned shutdowns, and emergency outages for critical machinery to ensure safely completed works within tight schedules and budgets.</p></li><li><p>Oversee, troubleshoot, and manage the advanced maintenance of critical compressor technologies, including Centrifugal, Screw, and Reciprocating compressors.</p></li><li><p>Ensure the integrity and proper operation of advanced sealing technologies, specifically managing dry gas seals for compressors, specialized API mechanical seals, and high-capacity production extruders.</p></li><li><p>Supervise the reliability, inspection, and maintenance of plant utility systems, specifically water tube boilers, cooling towers, and heat exchangers.</p></li><li><p>Optimize materials control by establishing critical spare parts lists, auditing warehouse stock levels, evaluating technical bids for replacement components, and ensuring zero downtime due to part unavailability.</p></li><li><p>Track, analyze, and report maintenance KPIs to drive continuous improvement.</p></li><li><p>Guarantee that all maintenance activities, alignments, and modifications strictly adhere to international engineering codes, specifically API and ASME standards</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s Degree in Mechanical Power Engineering.</p></li><li><p>5–10 years of heavy hands-on experience within Petrochemical, Oil & Gas, or Polypropylene manufacturing plants.</p></li></ul><ul><li><p>Proven track record in executing major overhauls and alignments on centrifugal, screw, and reciprocating compressors.</p></li><li><p>Deep understanding of API mechanical seals plans, dry gas seal support/control systems, extruders, and utility assets (water tube boilers, heat exchangers, cooling towers).</p></li><li><p>Direct experience participating in or leading mechanical scopes during major turnarounds.</p></li><li><p>Strong familiarity with ASME and API codes.</p></li><li><p>Solid understanding of inventory control (Spare Parts Management) and data-driven maintenance through tracking reliability</p></li><li><p>Strong root-cause analysis (RCA) capabilities, technical team leadership, and excellent English communication skills.</p></li></ul><p></p>
<p>Responsibilities:</p><ul><li><p>Security Architecture & Strategy</p></li><li><p>Design, integrate, and maintain end-to-end security architecture for on-premises and cloud environments</p></li><li><p>Ensure secure network topology including segmentation, access control, and VPN tunnels</p></li><li><p>Lead development and enforcement of security policies, procedures, and best practices</p></li><li><p>Work closely with developers and IT architects to embed security into application and infrastructure design</p></li><li><p>SOC, SIEM, and Threat Management</p></li><li><p>Manage endpoint protection through EDR and threat-hunting solutions</p></li><li><p>Manage and enhance email security systems to protect against phishing, malware, and spam, ensuring compliance with organizational security policies</p></li><li><p>Lead incident response efforts and develop threat prevention strategies</p></li><li><p>Application and Cloud Security</p></li><li><p>Supervise vulnerability scanning and penetration testing for internally developed applications</p></li><li><p>Governance, Risk & Compliance (GRC)</p></li><li><p>Drive cybersecurity-related compliance programs.</p></li><li><p>Lead cross-functional GRC initiatives and support internal/external audits</p></li><li><p>Manage security risk assessments and recommend mitigation strategies</p></li><li><p>Documentation & Collaboration</p></li><li><p>Maintain detailed documentation for security controls, policies, systems, and incidents</p></li><li><p>Work collaboratively with software engineers, network teams, and business units</p></li></ul><p> </p><p></p><p><strong>Requirements</strong></p><ul><li><p><strong>Requirements</strong></p><p><strong> </strong></p><p><strong>Minimum Qualifications</strong></p><ul><li><p>Education: Bachelor's degree in Engineering, Computer Science, Information Security, Cybersecurity, or a related discipline.</p></li><li><p>Experience: Minimum of 4 years of hands-on experience in cybersecurity, information security, or related technical security roles.</p></li></ul><p> </p><p>Technical Expertise</p><p>Demonstrated experience and proficiency in:</p><ul><li><p>Designing and implementing security architectures for hybrid cloud and on-premises environments.</p></li><li><p>Deploying, managing, and optimizing security technologies, including:</p><ul><li><p>Firewalls</p></li><li><p>Web Application Firewalls (WAF)</p></li><li><p>Endpoint Detection and Response (EDR)</p></li><li><p>Security Information and Event Management (SIEM)</p></li><li><p>Unified Threat Management (UTM)</p></li><li><p>Intrusion Prevention Systems (IPS)</p></li><li><p>Secure Web Proxies</p></li><li><p>Distributed Denial-of-Service (DDoS) protection and mitigation solutions</p></li></ul></li><li><p>Network security design and operations, including security protocols, network segmentation, subnetting, VPN technologies, and access control models.</p></li><li><p>Assessing security risks and implementing appropriate controls to safeguard enterprise systems, applications, and data.</p></li></ul><p></p></li></ul><p></p>
<p><strong>Summary :</strong></p><p><br></p><p><strong>Elgabaly Architects is a collective of forward-thinking architects, engineers, designers, planners, thinkers, and visionaries. Our collaborative team accumulates over 28 years’ experience of designing boundary-breaking projects that seek to enrich humanity, connect locals and visitors to fascinating architectural icons, and redefine design possibilities.</strong></p><p> </p><p><strong>Responsibilities</strong></p><p><br></p><p>· Approved samples.</p><p>· Arrange a final package for the construction documents (soft copy) dated by the latest issue.</p><p>· Coordinate with the site office manager to approve and accept the material.</p><p>· Insure that the final set is existing in site.</p><p>· Insure the staff performance and quality assurance for the site work.</p><p>· Original BOQ of specification.</p><p>· Original design drawings.</p><p>· Prepare a full set ( original copy) for all the site documents in the head office</p><p>· Prepare a full set of material samples and its suppliers in site.</p><p>· Prepare the method of statement for all the Architectural items for each projects, and the phases</p><p> of inspection required.</p><p>· RFI – request for inspection files of log.</p><p>· Update this set weekly</p><p>· acting as the main technical adviser on a construction site for subcontractors, crafts people</p><p> and Operatives</p><p>· checking plans, drawings and quantities for accuracy of calculations;</p><p>· ensuring that all materials used and work performed are as per specifications;</p><p>· agreeing a price for materials and making cost-effective solutions and proposals for the</p><p> intended project;</p><p>· liaising with any consultants, subcontractors, supervisors, planners, quantity surveyors and</p><p> the general workforce involved in the project;</p><p>· Day-to-day management of the site, including supervising and monitoring the site labour</p><p> force and the work of any subcontractors;</p><p>· planning the work and efficiently organizing the plant and site facilities in order to meet</p><p> agreed deadlines;</p><p>. preparing reports as required;</p><p>. Resolving any unexpected technical difficulties and other problems that may arise.</p><p><br></p><p><strong>Qualifications</strong></p><ul><li>Project management and supervision skills</li><li>BA/BS degree in Architecture.</li><li>Minimum experience 12-15years.</li><li>Strong communication and interpersonal skills</li><li>Proficient in AutoCAD and Revit</li></ul>
<p><strong>Company Description</strong> Made2 operates a central laboratory team dedicated to delivering reliable, high-quality microbiological testing and analysis. The organization supports a range of projects and partners by providing accurate data that informs product safety, regulatory compliance, and process improvement. The central lab emphasizes standardized procedures, validated methods, and continuous quality monitoring. Team members collaborate across disciplines to maintain efficient workflows, robust documentation, and strong communication with internal and external stakeholders.</p><p><strong>Role Description</strong> The Microbiologist role is a full-time, on-site position based in Port Said, working as part of the Made2 central lab team. The person in this role will perform routine and specialized microbiological testing, including sample preparation, culturing, identification, and enumeration of microorganisms. Daily tasks include operating and maintaining laboratory equipment, recording and analyzing data, and preparing clear test reports in accordance with established protocols and quality standards. The Microbiologist will contribute to quality control and quality assurance activities, support method validation, and assist in investigating nonconformities or deviations. Collaboration with colleagues to ensure safe laboratory practices, adherence to regulatory and company requirements, and continuous improvement of lab processes is expected.</p><p><strong>Qualifications</strong></p><p> </p><ul><li>Strong microbiology expertise, including practical experience with microbial culturing, identification, and analysis.</li><li>Laboratory skills covering sample handling, aseptic techniques, and adherence to standardized testing methods.</li><li>Proficiency in using and maintaining laboratory equipment, with attention to calibration, troubleshooting, and safe operation.</li><li>Experience in quality control and quality assurance within a laboratory setting, including documentation and compliance with protocols.</li><li>Relevant academic background, such as a bachelor’s degree or higher in Microbiology, Biology, or a related scientific field.</li><li>Ability to interpret data, prepare accurate reports, and communicate findings clearly to technical and non-technical stakeholders.</li><li>Knowledge of laboratory safety standards and regulatory requirements, with a commitment to safe working practices.</li><li>Strong organizational and time-management skills, with the ability to work collaboratively and meet deadlines in an on-site lab environment.</li></ul>
Teaching Assistant (Demonstrator) at the Faculty of Industry and Energy Technology, East Port Said Technological University, specializing in Mechanical and Manufacturing Engineering.<br><br>- Deliver academic instruction and supervise practical laboratory sessions in manufacturing-related courses.<br>- Assist in lectures, student assessments, and technical training activities.<br>- Teach English for Specific Purposes (ESP) to engineering students.<br>- Supervise innovative student projects in AI, smart manufacturing, predictive maintenance, and sustainable engineering.<br>- Mentored 7 student projects across 13 competition entries, achieving 8 placements, including 3 first-place awards.<br>- Conduct scientific research in advanced manufacturing, metal forming, ECAP, and materials processing, contributing to international publications.<br>- Support laboratory development and equipment oversight through university committee activities.
<ul><li><p>Design systems and components that meet needs and requirements</p></li><li><p>Test and evaluate theoretical designs</p></li><li><p>Identify, formulate and produce effective solutions to emerging problems</p></li><li><p>Evaluate final product’s overall performance, reliability and safety</p></li><li><p>Alter and modify design to meet requirements and to eliminate malfunctions</p></li><li><p>Solicit observations from operators</p></li><li><p>Prepare product reports and documentation</p></li><li><p>Engage in lifelong learning and develop new theories or methods</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>BSc degree in Mechanical Engineering is a Must</p></li><li><p>Proven working experience in mechanical engineering</p></li><li><p>Hands-on experience with computer-aided engineering (CAM) and computer-aided manufacturing (CAE)</p></li><li><p>Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)</p></li><li><p>Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)</p></li><li><p>Mathematical computing and analysis tools knowledge.</p></li><li><p>Solid understanding of core concepts including mechanics, kinematics, thermodynamics, materials science etc.</p></li><li><p>Creativity and analytical skills</p></li><li><p>Ability to communicate technical knowledge in a clear and understandable manner</p></li><li><p>Port-said Residence is a must </p></li></ul><p></p><p></p>
<p>Pay: 1,300 USD/month plus performance bonuses. Full-time, fully remote.</p><p>Talentige is hiring an outbound Sales Representative (SDR) to help a fast-growing US company in the industrial sector win new business. You'll connect with decision-makers at manufacturing and industrial B2B companies, open meaningful conversations, and book qualified meetings for the sales team.</p><p>What you'll do</p><ul><li>Prospect daily by phone, email, and LinkedIn</li><li>Research target accounts and identify the right decision-makers (operations, procurement, plant and facility managers)</li><li>Qualify leads and book discovery calls for account executives</li><li>Follow up consistently and keep deals moving forward</li><li>Keep calls, notes, and pipeline updates accurate in the CRM</li><li>Meet weekly activity and meeting targets</li></ul><p>What we're looking for</p><ul><li>2+ years of outbound B2B sales, SDR, BDR, or appointment-setting experience</li><li>Professional-level (or better) spoken and written English</li><li>Confidence with high-volume cold calling to US prospects</li><li>Hands-on experience with a CRM such as HubSpot, Salesforce, or Pipedrive</li><li>Industrial, manufacturing, or technical B2B experience is a big plus</li><li>Organized, driven, and results-oriented</li></ul><p>What we offer</p><ul><li>1,300 USD/month plus performance bonuses</li><li>Full-time, 100% remote position</li><li>Long-term role with a growing US company</li></ul>
<ul><li><p>Engage with customers in-store to understand their needs and recommend suitable Apple products, solutions, and accessories.</p></li><li><p>Deliver hands-on product demonstrations that showcase key features and benefits to enhance the customer experience.</p></li><li><p>Maintain up-to-date knowledge of Apple products, software, and promotions to provide accurate information and advice.</p></li><li><p>Assist customers with product selection, financing options, and after-sales support to ensure a seamless buying journey.</p></li><li><p>Achieve individual and store sales targets through proactive customer engagement and upselling techniques.</p></li><li><p>Handle customer inquiries, resolve issues, and ensure high levels of customer satisfaction.</p></li><li><p>Participate in ongoing training sessions to stay current with the latest Apple technologies and retail best practices.</p></li><li><p>Support store merchandising, inventory management, and visual displays to create an inviting shopping environment.</p></li><li><p>Collaborate with team members to organize in-store events, product launches, and promotional activities.</p></li><li><p>Accurately process sales transactions and maintain records in accordance with company policies.</p></li></ul><p><strong>What will we provide?</strong></p><ul><li><p><strong> </strong>Competitive Salary (Lead market )</p></li><li><p>Attractive Commission and Incentives</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>0 to 1 year of experience in sales, retail, or customer service roles.</p></li><li><p>Maximum age 28</p></li><li><p>Excellent communication and interpersonal skills with a customer-centric approach.</p></li><li><p>Strong interest in technology, particularly Apple products and solutions.</p></li><li><p>Ability to quickly learn and convey technical information to customers.</p></li><li><p>Demonstrated ability to work effectively in a fast-paced, team-oriented environment.</p></li><li><p>Flexibility to work on-site and adapt to varying schedules, including weekends and holidays.</p></li><li><p>Goal-oriented mindset with a drive to achieve and exceed sales targets.</p></li><li><p>Very good English</p></li></ul><p></p>
<ul><li><p>Contribute to the preparation of the HSE department budget and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues and areas of unsatisfactory performance are identified.</p><ul><li><p>Recommend improvements to policy and direct the implementation of instructions so that all relevant procedural/legislative requirements are fulfilled while delivering a quality, cost-effective service.</p></li><li><p>Supervises the day-to-day operations to ensure that work processes are implemented as designed and comply with established policies, processes and procedures.</p></li><li><p>Ensure that all activities are monitored and regulatory compliance audits and inspections are conducted for an effective implementation of regulatory standards.</p></li><li><p>Continuous Improvement</p></li></ul></li><li><p>Stimulate subordinates and contribute to the identification of opportunities for continuous improvement of section systems, processes and practices taking into account ‘international best practice’, improvement of business processes, cost reduction and productivity improvement.</p></li><li><p>Supervise the preparation of timely and accurate reports to meet Procedures and department requirements, policies and standards, regards HSE Management performance to Top Management.</p></li><li><p>Monitor the adherence to all relevant safety and environmental management procedures and controls to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude.</p></li><li><p>Develop, implement, maintain appropriate standards including OHSAS 18001.</p><p>Liaise with all related government bodies for health and safety issues.</p><p>Provide and issue the correct personal protection equipment and uniforms are available and used by employees.</p></li><li><p>Identify and carry out or arrange appropriate safety training to ensure all employees are aware of safety requirements and are trained to operate safely under all conditions and at all times.</p><p>Monitor and advise in coordination with HR Department on the Company’s Compliance with the Egyptian Labour and Workmen Law and any other relevant legislation and safety policies.</p></li><li><p></p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s degree in Engineering or Science Degree</p></li><li><p>15 years relevant experience in HSE Field</p></li><li><p>A working knowledge of Egyptian safety legislation and good industrial practice. A formal safety qualification is an advantage</p></li></ul><ul><li><p>Strong spoken and written English.</p></li><li><p>Report writing skills</p></li><li><p>Technical report writing skills.</p></li><li><p>Excellent computer skills required</p></li><li><p>Good presentation, communications and organizational skills</p></li></ul><p></p>
Receive email alerts for Technical Analysts Jobs jobs
You can cancel your email alert at anytime