Mechanical Drafts Man Jobs - Ismailia Egypt
11 Jobs Found
Save and set alert for similar positionsManage alerts
Role Description The Mechanical Production Engineer role at Diniz Adient Egypt is a full-time, on-site position based in Ismailia, focused on overseeing daily production operations for mechanical manufacturing processes. The role involves monitoring production lines, optimizing workflows, and coordinating with cross-functional teams to meet output, safety, and quality targets. The Mechanical Production Engineer is responsible for implementing production plans, resolving technical issues, adjusting processes to improve efficiency, and supporting preventive maintenance activities. The role also includes preparing reports, analyzing production data, and contributing to continuous improvement initiatives to reduce waste and enhance productivity. Collaboration with quality, maintenance, and logistics teams is key to ensuring smooth operations and timely delivery.<br>Qualifications<br> Candidates should possess strong Production Engineering and Production Planning skills to manage mechanical manufacturing processes and daily production activities. Candidates should possess solid Analytical Skills to interpret production data, identify root causes of issues, and drive process improvements. Candidates should possess Quality Control skills to ensure adherence to standards, perform inspections, and support corrective and preventive actions. Candidates should possess effective Communication skills to coordinate with cross-functional teams, document findings, and report on production performance. Relevant qualifications such as a bachelor’s degree in Mechanical Engineering or Production Engineering are preferred. Experience in automotive or industrial manufacturing environments, familiarity with lean manufacturing, and knowledge of health and safety regulations are beneficial. Ability to work on-site in Ismailia, manage multiple tasks, and respond promptly to production issues is required.
<p><strong>Responsibilities:</strong></p><ul><li>Lead and supervise the Mechanical Technical Office team and distribute tasks according to project priorities and deadlines.</li><li>Review and coordinate mechanical shop drawings, ensuring accuracy and compliance with project specifications, approved designs, and applicable codes.</li><li>Manage quantity take-offs, BOQs, material submittals, and value engineering activities for mechanical systems.</li><li>Coordinate with architectural, structural, electrical, plumbing, HVAC, and BIM teams to resolve technical issues and design conflicts.</li><li>Develop and review mechanical BIM models using Revit MEP and ensure proper coordination between BIM models and mechanical shop drawings.</li><li>Review and coordinate HVAC, plumbing, firefighting, and other mechanical systems according to project scope.</li><li>Prepare and review technical submittals, material schedules, and technical documentation.</li><li>Monitor technical deliverables, ensure quality standards, and meet project deadlines.</li><li>Coordinate with site teams to resolve technical queries and ensure smooth execution of mechanical works.</li><li>Provide technical guidance, mentoring, and support to team members.</li></ul><p><br></p><p><strong>Requirements:</strong></p><ul><li>Bachelor’s degree in Mechanical Engineering.</li><li>Proficiency in Revit MEP and good knowledge of BIM coordination workflows.</li><li>Minimum 5 years of experience in Mechanical Technical Office works.</li><li>Previous experience in team leadership or supervision.</li><li>Excellent knowledge of AutoCAD, mechanical shop drawings, and quantity surveying.</li><li>Good knowledge of HVAC, plumbing, and firefighting systems.</li><li>Familiarity with project specifications, technical submittals, and relevant codes and standards.</li><li>Strong leadership, communication, coordination, and problem-solving skills</li></ul><p><br></p><p><strong>Location: Ismailia</strong></p><p><br></p>
<p><strong>Responsibilities:</strong></p><ul><li>Lead and supervise the Mechanical Technical Office team and distribute tasks according to project priorities and deadlines.</li><li>Review and coordinate mechanical shop drawings, ensuring accuracy and compliance with project specifications, approved designs, and applicable codes.</li><li>Manage quantity take-offs, BOQs, material submittals, and value engineering activities for mechanical systems.</li><li>Coordinate with architectural, structural, electrical, plumbing, HVAC, and BIM teams to resolve technical issues and design conflicts.</li><li>Develop and review mechanical BIM models using Revit MEP and ensure proper coordination between BIM models and mechanical shop drawings.</li><li>Review and coordinate HVAC, plumbing, firefighting, and other mechanical systems according to project scope.</li><li>Prepare and review technical submittals, material schedules, and technical documentation.</li><li>Monitor technical deliverables, ensure quality standards, and meet project deadlines.</li><li>Coordinate with site teams to resolve technical queries and ensure smooth execution of mechanical works.</li><li>Provide technical guidance, mentoring, and support to team members.</li></ul><p><br></p><p><strong>Requirements:</strong></p><ul><li>Bachelor’s degree in Mechanical Engineering.</li><li>Proficiency in Revit MEP and good knowledge of BIM coordination workflows.</li><li>Minimum 5 years of experience in Mechanical Technical Office works.</li><li>Previous experience in team leadership or supervision.</li><li>Excellent knowledge of AutoCAD, mechanical shop drawings, and quantity surveying.</li><li>Good knowledge of HVAC, plumbing, and firefighting systems.</li><li>Familiarity with project specifications, technical submittals, and relevant codes and standards.</li><li>Strong leadership, communication, coordination, and problem-solving skills</li></ul><p><br></p><p><strong>Location: Ismailia</strong></p><p><br></p>
<p><strong>Company Description</strong> Velocity Egypt, part of the Velocity Group of ready-made garments companies, is a leading multinational apparel manufacturer based in the Free Zone, Ismailia, Egypt. The group produces around 4.5 million denim and garment products annually and employs a diverse workforce of 3,500 associates from more than eight nations. With over 30 years of experience, Velocity supplies premium denim, over-dyed, and activewear products to top European and US brands under duty-free QIZ terms. The company maintains strong capabilities in design, research, and development, with a head office in the UAE, a design office in Italy, and business development teams across the USA, Europe, Asia, and the Middle East. Velocity is committed to eco-friendly solutions and core values centered on respect, teamwork, performance, innovation, environmental concern, and providing employees with an international work environment and attractive career opportunities.</p><p><strong>Core Responsibilities</strong></p><p>• Technical Sourcing & Procurement:</p><p>o Electrical & Plumbing: Cables, switchgear, motors, pipes, fittings, pumps, and drainage components matching system specs.</p><p>o Workshop & Mechanical: Fasteners, bearings, belts, welding, lubricants, tools, and fabrication supplies.</p><p>o Civil & Construction: Steel, cement, ready-mix concrete, roofing, and materials matching approved BOQs and project drawings.</p><p>o Machinery & Utilities: Genuine/approved spares for laundry machines, boilers, and air compressors using catalogues, serial numbers, and model specs.</p><p>• Commercial Management:</p><p>o Sourcing reliable suppliers, preparing quotation comparisons (analyzing price, quality, warranty, lead times), and negotiating commercial terms for cost savings.</p><p>• Operational Execution:</p><p>o Generating POs, prioritizing urgent breakdown requests to minimize downtime, tracking deliveries, verifying received goods, and managing supplier databases.</p><p>o Coordinating cross-functionally with Engineering, Projects, Finance, Stores, and suppliers.</p><p>Key Qualifications & Skills</p><p>• Education & Experience: Diploma/Degree in Mechanical, Electrical, Civil Engineering, or related technical field with proven experience in technical/industrial manufacturing procurement.</p><p>• Technical Competence</p><p>• Core Skills: Supplier negotiation, cost control, vendor development, and proficiency in MS Excel </p><p><br></p>
<p>Responsible for improving production in the factories by supporting all teams, reporting issues to management, and creating strategies that will enhance efficiency and profits.</p><p>Responsible for:</p><p>Stakeholders' management,</p><p>production schedules,</p><p>project budgets, planning, and reporting. </p><p><strong>Requirements</strong></p><ul><li><p>BA in Engineering (mechanical/chemical).</p></li><li><p>Previous work experience in the industrial sector (3-10years).</p></li><li><p>Problem Solving Skills</p></li><li><p>Analytical Skills</p></li><li><p>Lean Manufacturing/ 6 Sigma Certification is a plus.</p></li><li><p>Knowledge in Waste management and/or<br>Sustainability practices + Policies/Procedures.</p></li><li><p>Proven track record in managing production lines with efficient reporting systems.</p></li><li><p>Ability to manage large teams across various disciplines.</p></li><li><p>Resilient and innovative operation practices.</p></li><li><p>Location: Egypt on-site.</p></li></ul><p></p>
<ul><li><p>Manage and supervise the daily operation and maintenance activities at the site.</p></li><li><p>Operate, monitor, and maintain central air conditioning and HVAC systems.</p></li><li><p>Ensure the proper and continuous operation of all HVAC equipment and systems.</p></li><li><p>Execute and follow up on preventive and corrective maintenance activities.</p></li><li><p>Inspect HVAC equipment regularly and identify potential faults and operational issues.</p></li><li><p>Troubleshoot and diagnose mechanical and operational problems and ensure timely corrective actions.</p></li><li><p>Follow up on the operation and performance of chillers, AHUs, FCUs, pumps, cooling towers, ventilation systems, and related equipment.</p></li><li><p>Supervise maintenance technicians and distribute daily tasks according to the maintenance plan.</p></li><li><p>Follow up on technicians’ performance and ensure that maintenance activities are properly executed.</p></li><li><p>Respond to emergency breakdowns and coordinate the required corrective maintenance.</p></li><li><p>Prepare and implement preventive maintenance schedules.</p></li><li><p>Follow up on daily maintenance activities and ensure that all work is completed within the required time.</p></li><li><p>Inspect equipment condition and identify spare parts and maintenance requirements.</p></li><li><p>Coordinate with the client, site management, contractors, and other departments when required.</p></li><li><p>Prepare daily, weekly, and monthly maintenance reports.</p></li><li><p>Maintain records of breakdowns, preventive maintenance, corrective maintenance, and equipment performance.</p></li><li><p>Monitor equipment efficiency and recommend solutions to improve reliability and reduce downtime.</p></li><li><p>Follow up on recurring faults and implement preventive actions to minimize breakdowns.</p></li><li><p>Ensure compliance with safety procedures and company policies at the site.</p></li><li><p>Ensure that all maintenance activities are carried out according to approved procedures and technical standards.</p></li><li><p>Follow up on contractors and specialized maintenance teams when required.</p></li><li><p>Participate in testing, commissioning, and troubleshooting activities related to HVAC systems.</p></li><li><p>Ensure proper housekeeping and safe working conditions within maintenance areas.</p></li><li><p>Report any major technical problems, equipment failures, or required replacements to the management.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor’s Degree in Mechanical Engineering.</p></li><li><p><strong>3–5 years of experience</strong> in site maintenance and operation.</p></li><li><p>Strong practical experience in <strong>central air conditioning and HVAC systems</strong>.</p></li><li><p>Experience in operating and maintaining chillers and related HVAC equipment.</p></li><li><p>Good knowledge of preventive and corrective maintenance.</p></li><li><p>Strong troubleshooting and problem-solving skills.</p></li><li><p>Previous experience supervising maintenance technicians is preferred.</p></li><li><p>Good communication, leadership, and coordination skills.</p></li><li><p>Ability to work under pressure and handle emergency breakdowns.</p></li><li><p>Good knowledge of occupational health and safety procedures.</p></li><li><p>Good reporting and documentation skills.</p></li><li><p>Ability to work independently and take responsibility for site operations and maintenance.</p></li><li><p><strong>Must be a resident of Ismailia or currently living in Ismailia.</strong></p></li></ul><p></p>
<strong>Role Description</strong> This full-time, on-site Production Engineer role is based at Diniz Adient Egypt in Ismailia. The Production Engineer will oversee daily manufacturing operations, monitor production lines, and ensure that output meets safety, quality, and efficiency standards. Responsibilities include planning and coordinating production schedules, analyzing performance data, identifying process bottlenecks, and implementing continuous improvement initiatives. The role also involves collaborating closely with cross-functional teams, supporting root-cause analysis for production issues, and preparing reports and documentation to support operational decisions. The Production Engineer is expected to promote a culture of safety, maintain compliance with company policies and industry regulations, and contribute to cost optimization and waste reduction efforts.<br><strong>Qualifications<br></strong> <ul><li>Strong foundation in Production Engineering, including manufacturing processes and industrial systems.</li><li>Proficient Analytical Skills for data-driven problem-solving, process optimization, and root-cause analysis.</li><li>Experience in Production Planning, including scheduling, resource allocation, and workflow coordination.</li><li>Knowledge of Quality Control practices, standards, and tools to ensure consistent product quality.</li><li>Effective Communication skills for collaborating with production teams, management, and other stakeholders.</li><li>Bachelor’s degree in Production Engineering, Mechanical Engineering, Industrial Engineering, or a related field.</li><li>Familiarity with lean manufacturing, continuous improvement methodologies, and safety regulations.</li><li>Ability to work on-site in Ismailia, manage multiple priorities, and adapt to a fast-paced production environment.</li></ul>
<ul><li><p>Develop and implement the annual maintenance plan (preventive and corrective) for all agricultural equipment and facilities.</p></li><li><p>Set maintenance priorities based on technical analysis and operational needs to ensure optimal performance.</p></li><li><p>Directly supervise maintenance engineers and technicians, and effectively assign daily tasks to ensure timely completion of work.</p></li><li><p>Periodically evaluate the performance of the maintenance team and identify training and development needs to enhance technical efficiency.</p></li><li><p>Monitor equipment breakdowns and address them as quickly as possible to minimize downtime and ensure production continuity.</p></li><li><p>Lead emergency plans and rapid response actions in the event of critical system failures to ensure swift restoration of operations.</p></li><li><p>Ensure the availability of required spare parts by continuously updating inventory records and coordinating with the procurement department.</p></li><li><p>Prepare and monitor the annual maintenance budget, ensuring adherence while maintaining a balance between quality and cost.</p></li><li><p>Submit periodic reports to senior management covering equipment status, maintenance costs, breakdown rates, and recommendations.</p></li><li><p>Implement and monitor occupational health and safety standards, and ensure compliance with environmental and technical regulations in all maintenance operations.</p></li><li><p>Manage contracts and vendors responsible for outsourced maintenance services.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Diploma or Bachelor's degree in Mechanical, Electrical Engineering, or related technical field.</p></li><li><p>From 8 to 12 years of experience in maintenance management..</p></li><li><p>Strong knowledge of farm equipment, electrical systems, water systems, and HVAC.</p></li><li><p>Ability to read technical manuals and blueprints.</p></li><li><p>Strong problem-solving and organizational skills.</p></li><li><p>Proficiency in Computerized Maintenance Management Systems (CMMS) and technical data analysis software.</p></li><li><p>Strong leadership and organizational skills with the ability to make quick and sound decisions.</p></li><li><p>Ability to prepare technical reports and effectively analyze maintenance data.</p></li><li><p>Good knowledge of quality standards, occupational health and safety requirements, and relevant environmental regulations.</p></li></ul><p></p>
We’re Hiring: Sales Manager<br>ATOS Generators is looking for an experienced and results-driven Sales Manager to join our team and lead our sales operations, drive business growth, and build strong, long-term relationships across the power generation and engineering sectors.<br>???? Key Responsibilities<br>* Lead, manage, and motivate the sales team to achieve and exceed sales targets.* Develop and execute effective sales strategies aligned with the company’s business objectives.* Identify and develop new business opportunities, projects, and key accounts.* Build and maintain strong relationships with clients, contractors, consultants, and business partners.* Manage the complete sales cycle, from identifying opportunities to closing deals.* Develop and maintain a strong sales pipeline and monitor team performance.* Analyze market trends, competitors, and customer needs to identify growth opportunities.* Provide continuous coaching, guidance, and support to the sales team.<br>✅ Job Requirements<br>* 3–5 years of experience in a Sales Manager or senior sales leadership role.* Proven experience in the Generators / Power Generation industry is highly preferred.* Solid background in engineering industries is a strong advantage.* Bachelor’s degree in Mechanical or Electrical Engineering.* Proven experience in leading and managing a complete sales team.* Strong professional network and established relationships within the market.* Excellent communication, negotiation, relationship-building, and client management skills.* Strong business development and opportunity-generation capabilities.* Excellent leadership, decision-making, and team management skills.* Results-oriented mindset with a strong focus on achieving sales targets.<br>???? What We Offer<br>* Competitive Fixed Salary.* Attractive Commission Scheme based on performance and achieved targets.* Opportunity to work with a growing company specialized in power generation and energy solutions.* Professional work environment with opportunities for career growth and development.<br>???? Location: Ismailia, Egypt<br>If you have solid experience in the power generation / generators market, a strong professional network, and the leadership skills to drive a high-performing sales team, we would love to hear from you.<br>???? To Apply: Send your updated CV with “Sales Manager” in the email subject line.<br>HR@atosgenerators.com
<p>- Operate and manage plastic injection molding production, with a focus on PVC injection molding.</p><p>- Set up injection molding machines, perform machine start-up, and adjust process parameters for stable production.</p><p>- Install molds and perform mold changeovers and production setup.</p><p>- Monitor and optimize injection molding parameters, including injection pressure, injection speed, holding pressure, temperature, cooling time, and cycle time.</p><p>- Troubleshoot machine and process-related issues and resolve common injection molding defects such as short shots, flash, sink marks, warpage, burning, and dimensional problems.</p><p>- Maintain stable, continuous, and efficient mass production while minimizing scrap, defects, and material waste.</p><p>- Monitor product quality and maintain consistent production standards.</p><p>- Support the setup and stabilization of new machines and molds.</p><p>- Train and supervise machine operators when required.</p><p>- Train and supervise machine operators when required.</p><p>- Take responsibility for machine performance and the overall production process.</p><p><strong>Requirements</strong></p><ul><li><p></p></li></ul><p>- Minimum 10 years of hands-on experience in plastic injection molding production.</p><p>- Proven hands-on experience in PVC injection molding and PVC processing.</p><p>- Hands-on experience with Yizumi plastic injection molding machines is mandatory.</p><p>- Strong knowledge of injection molding process parameters and machine settings.</p><p>- Ability to independently perform machine setup, start-up, parameter adjustment, and production optimization.</p><p>- Strong experience in mold installation, mold changeover, and production setup.</p><p>- Strong troubleshooting and defect-solving skills.</p><p>- Proven experience in stable and continuous mass production.</p><p>- Experience with injection molding machines of different</p><p>- capacities, particularly 120T, 160T, and 260T.</p><p>- Experience with auxiliary equipment such as hopper dryers, chillers, temperature controllers, and material loaders is preferred.</p><p>- Experience producing technical plastic components or industrial plastic products is preferred.</p><p>- Ability to train and supervise machine operators.</p><p>- Technical education or background in plastics, mechanical engineering, or industrial manufacturing is an advantage.</p><p>- Previous experience in a structured industrial production environment is preferred.</p><p>- Good spoken English is mandatory.</p><p>- Willingness to work in Ismailia, Egypt.</p>
<strong>Company Description</strong> Egyptian Engineering Company (EEC) is a specialized Engineering Technical Office providing multidisciplinary engineering design, shop drawing, and BIM services for complex construction projects. The company’s integrated team covers Architectural, Structural, Mechanical, Electrical, and Low Current disciplines, delivering coordinated digital models and high-quality technical deliverables. EEC uses BIM-driven workflows to enhance coordination, detect clashes early, and optimize design integration, which helps clients reduce site rework and minimize coordination issues. With strong experience in large projects and a focus on quality and fast delivery, EEC supports contractors, developers, and project teams in improving construction efficiency and maintaining project schedules. Core services include shop drawings, value engineering, re-design, quantity surveying, quality control, planning, and budgeting and estimation.<br><strong>Role Description</strong> This is a full-time, on-site role for an Electrical Technical Office Engineer based in Al Isma'iliyah, Egypt. The Electrical Technical Office Engineer will prepare and review electrical shop drawings, coordinate with other disciplines, and ensure compliance with project specifications and standards. The role includes preparing BOQs and quantity take-offs for electrical systems, supporting value engineering and re-design efforts, and assisting in budgeting and estimation activities. The engineer will participate in multidisciplinary BIM coordination, resolve technical issues arising from site execution, and provide timely technical support to project and construction teams. Daily tasks also involve maintaining documentation, supporting quality control procedures, and contributing to planning and progress reporting.<br><strong>Qualifications<br></strong> <br><ul><li>Candidates should possess strong Electrical Engineering skills, including design, analysis, and coordination of electrical and low current systems.</li><li>Candidates should possess proficiency in Shop Drawings and BIM-related documentation for electrical works.</li><li>Candidates should possess experience in BOQ preparation and Quantity Surveying for electrical components and systems.</li><li>Candidates should possess a solid understanding of Civil Engineering interfaces to coordinate electrical work with structural and architectural elements.</li><li>Bachelor’s degree in Electrical Engineering or a closely related field.</li><li>Proficiency in relevant engineering and drafting software (e.g., AutoCAD, Revit or similar BIM tools, MS Excel).</li><li>Strong analytical and problem-solving skills, with attention to detail and accuracy in calculations and documentation.</li><li>Ability to work collaboratively in multidisciplinary teams and communicate technical information clearly.</li><li>Previous experience in technical office work for construction projects is highly desirable.</li></ul>
Receive email alerts for Mechanical Drafts Man Jobs jobs
You can cancel your email alert at anytime