Software Tester Jobs - Sharkia Egypt
216 Jobs Found
Save and set alert for similar positionsManage alerts
<ul><li>Implement and monitor HSE policies, procedures, and safety regulations across factory operations.</li><li>Conduct regular workplace inspections to identify potential hazards and unsafe practices.</li><li>Perform risk assessments and recommend appropriate preventive and corrective actions.</li><li>Monitor the proper use of Personal Protective Equipment (PPE) by employees.</li><li>Investigate workplace accidents, incidents, and near misses, and prepare investigation reports.</li><li>Conduct HSE induction and awareness sessions for new employees and existing staff.</li><li>Ensure the availability and proper maintenance of fire extinguishers and emergency equipment.</li><li>Monitor emergency exits, evacuation routes, and fire prevention systems.</li><li>Follow up on corrective and preventive actions to minimize workplace risks.</li><li>Ensure proper handling, storage, and disposal of hazardous materials and industrial waste.</li><li>Maintain HSE documentation, inspection checklists, incident reports, and safety records.</li><li>Coordinate with Production, Maintenance, and other departments to ensure safe working conditions.</li><li>Ensure compliance with Egyptian occupational health and safety requirements and environmental regulations.</li></ul>
<p><strong>Job Purpose</strong></p><p>Ensure the highest level of product quality and compliance with international standards, customer requirements, and regulatory frameworks through advanced inspection, analysis, and quality assurance activities. The Senior QC Engineer plays a key role in leading complex inspections, resolving escalated quality issues, driving continuous improvement initiatives, and mentoring junior engineers and inspectors. This role ensures that all products leaving the factory are fully compliant, reliable, and delivered on time, supporting the company’s reputation for excellence and customer trust.</p><p><br></p><p><strong>Key Responsibilities</strong></p><ul><li>Lead and supervise product inspections across all production phases, ensuring strict adherence to quality plans and specifications.</li><li>Validate inspection methodologies, sampling plans, and acceptance criteria for new or complex projects.</li><li>Conduct root cause analysis on recurring non-conformities and recommend sustainable corrective actions.</li><li>Coordinate with Testing Laboratories to validate results, ensuring technical compliance and timely certification release.</li><li>Oversee preparation of inspection documentation (drawings, datasheets, test requests) and validate test reports for customer approvals.</li><li>Act as the technical liaison with customers and third-party inspectors during audits and testing phases.</li><li>Monitor production cycles and collaborate with Planning and Production to ensure inspections are conducted on time, avoiding bottlenecks.</li><li>Provide expert guidance to production teams in troubleshooting quality issues and implementing preventive measures.</li><li>Ensure effective segregation and control of non-conforming products, issuing NCRs and monitoring closure of corrective actions.</li><li>Coordinate with QA to finalize NCRs and address activities associated with quality issues.</li><li>Drive improvements in inspection processes, tools, and methodologies to enhance efficiency and accuracy.</li><li>Review and update inspection checklists, forms, and QMS procedures in line with ISO and industry standards.</li><li>Support internal and external audits by preparing reports and demonstrating compliance with regulations.</li><li>Mentor and train junior QC Engineers and Inspectors, ensuring capability growth and consistent application of quality standards.</li><li>Conduct peer reviews of inspection reports and provide technical guidance on complex cases.</li><li>Foster a culture of accountability, continuous learning, and quality excellence across the QC team.</li><li>Ensure compliance with ISO 9001, ISO 14001, ISO 45001, and ISO 17025 standards.</li><li>Maintain proper records of inspections, test certificates, and customer approvals.</li><li>Prepare and present periodic quality performance reports to management, highlighting risks, trends, and improvement opportunities.</li></ul><p><br></p><p><strong>Qualification & Education:</strong></p><ul><li><strong>Education: </strong> Bachelor’s degree in Mechanical, Electrical, Industrial, or Quality Engineering.</li><li><strong>Years of Experience: </strong>3-5 years of experience in Quality Control/Quality Assurance within a manufacturing or heavy industry (preferably transformers or electrical equipment).</li></ul><p><strong>Technical competencies:</strong></p><ul><li>Advanced knowledge of inspection methodologies, statistical sampling, and measurement techniques.</li><li>Expertise in root cause analysis, corrective & preventive action (CAPA), and problem-solving tools (e.g., 5 Why, Fishbone).</li><li>Strong knowledge of international standards (ISO, IEC, ASTM, etc.) and QMS systems.</li><li>Proficiency in ERP/QMS software and inspection reporting tools.</li><li>Understanding of production processes, testing procedures, and calibration requirements.</li></ul><p><strong>Interpersonal Competencies:</strong></p><ul><li>Strong leadership and mentoring skills.</li><li>Excellent communication and negotiation abilities with internal and external stakeholders.</li><li>High attention to detail and ability to manage multiple priorities.</li><li>Strong analytical thinking and proactive problem-solving mindset.</li><li>Customer-oriented with the ability to manage inspections under tight deadlines.</li></ul><p><br></p>
Company Description Perfect Real Estate Development and Investment focuses on providing housing units for immediate delivery through installment plans with some of the lowest interest rates in the Egyptian real estate market. The company offers flexible sales services supported by a range of direct installment solutions to make home ownership more accessible. In addition to property sales, Perfect Real Estate provides services in finishing, design, and construction. The company also supports projects through the sale of building materials, enabling comprehensive real estate solutions for buyers and investors. Role Description This is a full-time, on-site Video Editor role based in 10th of Ramadan. The Video Editor will be responsible for editing video content for marketing campaigns, property showcases, and social media, ensuring that footage is engaging and aligned with brand guidelines. Daily tasks include assembling raw footage, applying basic and advanced edits, color correction and grading, adding motion graphics and titles, and collaborating with the marketing and sales teams to translate briefs into effective visual stories. The role also involves optimizing videos for different platforms, maintaining organized project files, and contributing creative ideas to improve visual communication of the company’s real estate offerings. Qualifications Strong skills in Video Editing and Video Production, with the ability to handle the full post-production workflow. Proficiency in Video Color Grading to ensure consistent, high-quality visual output. Experience with Motion Graphics and basic Graphics to create titles, transitions, and visual elements that enhance storytelling. Practical proficiency in industry-standard editing and compositing software (e.g., Adobe Premiere Pro, After Effects, DaVinci Resolve, or similar tools). Ability to work on-site in 10th of Ramadan and collaborate effectively with cross-functional teams. Strong attention to detail, time management skills, and the ability to meet deadlines in a fast-paced environment. Relevant education or training in film, media, design, or a related field is preferred; a portfolio showcasing previous video work is required.
<strong>Your Job<br><br></strong>We are looking for <strong>Junior </strong><strong>Electrical Power Engineer</strong> to support the safe, reliable, and efficient operation of electrical power systems within an industrial environment. The role will focus on electrical maintenance, troubleshooting, preventive maintenance, and continuous improvement of power generation and distribution equipment.<br><br>The successful candidate will work closely with maintenance, production, engineering, and other technical teams to ensure high equipment reliability and compliance with electrical safety requirements.<br><br><strong>What You Will Do<br><br></strong><ul><li>Support the operation, maintenance, and troubleshooting of electrical power generation and distribution systems.</li><li>Perform preventive and corrective maintenance activities for:<br><br><br></li></ul>- Diesel generators<br><br><ul><li> Medium-voltage (MV) and low-voltage (LV) switchgear</li><li> Motor Control Centres (MCCs)<br><br><br></li></ul>AC motors<br><br><ul><li> Power transformers</li><li> Power and control cables</li><li> Industrial and building lighting systems.</li><li>Diagnose electrical faults and support root cause analysis to minimize equipment downtime and improve reliability.</li><li>Inspect electrical equipment and identify potential failures or unsafe operating conditions.</li><li>Read and interpret electrical schematics, single-line diagrams, wiring diagrams, and technical drawings.</li><li>Support testing and maintenance of electrical protection systems.</li><li>Ensure maintenance activities are performed according to applicable electrical safety standards and safe work practices.</li><li>Maintain accurate maintenance records, technical reports, and equipment history.</li><li>Support continuous improvement initiatives related to electrical reliability, power quality, energy efficiency, and maintenance effectiveness.</li><li>Coordinate with multidisciplinary teams during maintenance activities, shutdowns, equipment upgrades, and technical projects.</li><li>Support maintenance planning and work-order management through applicable CMMS/EAM systems.<br><br><br></li></ul><strong>Who You Are (Basic Qualifications)<br><br></strong><ul><li>Bachelor's Degree in Electrical Engineering, preferably Electrical Power Engineering.</li><li>Proven experience in industrial electrical maintenance or power systems.</li><li>Practical experience with:</li><ul><li>Power generation and distribution systems</li><li>Diesel generators</li><li>MV and LV switchgear</li><li>MCCs and AC motors</li><li>Power transformers</li><li>Power and control cables</li><li>Industrial and building lighting systems</li></ul><li>Basic knowledge of electrical protection, troubleshooting, and preventive maintenance.</li><li>Ability to read and interpret electrical schematics, single-line diagrams, and technical drawings.</li><li>Familiarity with electrical safety standards and safe work practices.</li><li>Proficiency in Microsoft Office applications.<br><br></li></ul><strong>What Will Put You Ahead<br><br></strong><ul><li>Experience with UPS systems, battery chargers, and DC systems.</li><li>Exposure to power quality and energy management.</li><li>Familiarity with SAP PM, IBM Maximo, or other CMMS/EAM systems.</li><li>Experience or knowledge of HVAC systems is an advantage.</li><li>Knowledge of AutoCAD and power-system analysis software such as ETAP is a plus.<br><br><br></li></ul><em>At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.<br><br></em><strong>Who We Are<br><br></strong>As a Koch company, Guardian Glass is one of the world’s largest manufacturers of float, value-added and fabricated glass products and solutions. We produce high-performance glass for architectural, residential, interior, transportation and technical glass applications. You’ll find our glass in homes offices and cars and in some of the world’s most iconic projects.<br><br>At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.<br><br>Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.<br><br>
<strong>Job Title:</strong> SR Mechanical Design Engineer<p><strong>Company:</strong> CHINT-EGEMAC for Electrical Products Co., Ltd.</p><p><strong>Location:</strong> 10th of Ramadan</p><p><strong>Job Type:</strong> Full-time</p><p><strong>Department:</strong> Engineering & R&D</p><strong>About CHINT-EGEMAC</strong><p>CHINT-EGEMAC is a joint venture between CHINT Group, a global leader in smart energy solutions, and EGEMAC, a premier manufacturer of electrical equipment in Egypt. We specialize in producing high-quality low-voltage (LV) and medium-voltage (MV) switchgears, substations, and power distribution components tailored for industrial, commercial, and utility sectors.</p><strong>Position Overview</strong><p>We are looking for a <strong>Mechanical Design Engineer</strong> to join our engineering team. In this role, you will be responsible for designing and modeling mechanical structures, sheet metal enclosures, busbar layouts, and internal component mounting for LV/MV switchgears, panelboards, and control cabinets. You will work closely with electrical engineers, production teams, and supply chain managers to bring designs from concept to factory floor.</p><strong>Key Responsibilities</strong><ul><li><strong>3D & 2D Modeling:</strong> Design detailed 3D assemblies and 2D fabrication drawings for sheet metal switchgear enclosures, busbar structures, doors, and internal mechanical supports using SolidWorks or AutoCAD.</li><li><strong>DFM (Design for Manufacturing):</strong> Optimize designs for sheet metal cutting, bending, welding, punching, and powder coating processes.</li><li><strong>Component Integration:</strong> Plan mechanical dimensions and thermal/ventilation clearance for circuit breakers, busbars, transformers, and electrical meters within cabinets.</li><li><strong>BOM Creation:</strong> Generate accurate Bills of Materials (BOM), sheet metal cutting lists, and structural specs for procurement and production.</li><li><strong>Prototyping & Testing:</strong> Supervise prototype assembly, perform structural/heat dissipation checks, and support mechanical type-testing (e.g., IP rating, IK impact resistance, seismic tolerance).</li><li><strong>Cross-Functional Collaboration:</strong> Partner with electrical engineers to align mechanical spatial layouts with electrical schematics and busbar routing.</li><li><strong>Quality & Compliance:</strong> Ensure all mechanical designs strictly adhere to international and local standards (IEC 61439, IEC 62271, ISO 9001).</li></ul><strong>Required Qualifications & Skills</strong><ul><li><strong>Education:</strong> Bachelor’s degree in Mechanical Engineering, Mechatronics, or Production Engineering.</li><li><strong>Experience:</strong> 3–5 years of hands-on experience in mechanical design within the electrical equipment, switchgear, panel building, or sheet metal fabrication industries.</li><li><strong>Software Proficiency:</strong></li><li><strong>Advanced skills in SolidWorks</strong> (3D modeling, sheet metal module, assemblies) or <strong>Inventor</strong>.</li><li>Strong working knowledge of <strong>AutoCAD</strong> (2D layout drawings).</li><li><strong>Technical Knowledge:</strong></li><li><strong>In-depth understanding of sheet metal fabrication techniques (laser cutting, CNC bending, welding, surface treatment).</strong></li><li>Familiarity with LV/MV switchgear enclosures, IP enclosure protection ratings, and busbar mechanical support calculations.</li><li>Experience with Geometric Dimensioning & Tolerancing (GD&T).</li><li><strong>Languages:</strong> Fluent in Arabic; professional proficiency in written and spoken English.</li></ul><strong>Preferred Qualifications</strong><ul><li>Familiarity with IEC standards for switchgear enclosures (IEC 61439-1/2, IEC 62271-200).</li><li>Experience with finite element analysis (FEA) or thermal simulation tools in SolidWorks Simulation.</li></ul><strong>What We Offer</strong><ul><li>Competitive salary package based on experience.</li><li>Company transport / transportation allowance to 10th of Ramadan</li><li>Medical and social insurance coverage.</li><li>Opportunities for professional growth within a global joint venture network.</li></ul><strong>How to Apply</strong><ul><li>Interested candidates should send their updated CV and a dynamic portfolio of recent mechanical/sheet metal design projects to <strong>careers@chint-egemac.com</strong> (or <strong>info@chint-egemac.com</strong>) with the subject line: <strong>"Application: Mechanical Design Engineer - [Your Name]"</strong>.</li></ul><p>How to Apply</p><p>If you meet the requirements and are ready to advance your career with CHINT EGEMAC, please send your updated CV to recruitment@chint-egemac.com with the subject line: <strong>"SR Mechanical Design Engineer - Electrical Panels"</strong>.</p>
At <strong>ABB</strong>, we help industries run leaner and cleaner—and every person here makes that happen. You’ll be empowered to lead, supported to grow, and proud of the impact we create together. Join us and help run what runs the world.<br><br><strong>This position reports to:<br><br></strong>Low Voltage Systems Engineering ManagerLow Voltage Systems Engineering Manager<br><br>__<br><br>In this role, you will have the opportunity to be a design authority for an engineering discipline. Each day, you will complete assignments on multiple projects of moderate size or portions of major projects in a cost-effective manner. You will support engineering activities by coordinating and providing the materials needed for project execution, while showcasing your expertise to ensure all assignments are completed in accordance with contract specifications, quality standards, safety requirements, and cybersecurity policies.<br><br>The work model for the role is: #onsite #onsite-Li<br><br>This role is contributing to the MNS Electrical Design Office in Smart Power SPLVS – Low Voltage Systems Egypt. Main stakeholders include project managers, engineering teams, clients, and contractors.<br><br><strong>Key Responsibilities:<br><br></strong><ul><li>Working with the customer to shape and deliver solutions while seeking customer feedback to drive and deliver improvements</li><li>Creating work plans and cost estimates for the portfolio of projects and ensuring quality, and timely implementation within the targeted cost</li><li>Coordinating with relevant functions to ensure the designs are appropriately manufactured, staged, tested, installed, and commissioned</li><li>Supporting engineering activities by coordinating materials, drawings, and documentation needed for smooth project execution</li><li>Ensuring compliance with safety, quality, and cybersecurity standards in all engineering deliverables</li><li>Participating in project reviews and technical discussions to contribute to design improvements and innovation<br><br></li></ul>You will join a talented, highly qualified team, where you will be able to thrive.<br><br><strong>Qualifications:<br><br></strong><ul><li>You are engaged in working with the latest design and configuration software and tools in the field of low voltage switchgear engineering</li><li>You have 3–5 years of experience in the design of low voltage switchgear, including related activities such as testing, production support, and material planning</li><li>You possess strong knowledge of Low Voltage Systems, IEC standards, EPLAN, short-circuit and selectivity studies, automation, PLC programming, and switchgear configurators</li><li>You are passionate about solving technical challenges in the field of low voltage switchgear and committed to continuous learning and self-development</li><li>You stay up to date with the latest trends and technologies in low voltage systems, IEC standards, and switchgear engineering</li><li>Degree in Electrical, Electronics, or Mechanical Engineering</li><li>You are at ease communicating in English<br><br></li></ul><strong>What's in it for you?<br><br></strong>We want you to bring your full self to work—your ideas, your energy, your ambition. You’ll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day.<br><br>Be part of something bigger. This is where progress is powered, teams initiate action, and we move the world forward together.<br><br>Run What Runs the World.<br><br>#ABBCareers<br><br>#RunwithABB<br><br>#Runwhatrunstheworld<br><br>Building a cleaner, smarter future takes all kinds of minds: the curious, the courageous, and the creative. That's why we welcome people from all backgrounds and experiences.<br><br>Ready to make an impact?<br><br>Apply today or visit <strong>https://www.abb.com</strong> to learn more about the impact of our solutions across the globe.
Job Title: Fresh Graduate Material Requirements Planning (MRP) Engineer Company: CHINT EGEMAC Electrical Products Location: 10th of Ramadan City, Egypt (or initial training at 6th of October City with relocation/transfer to 10th of Ramadan) Department: Supply Chain / Production & Operations Planning Employment Type: Full-Time Job Description & Overview CHINT EGEMAC is seeking an entry-level MRP Engineer (Material Requirements Planning) to manage and optimize inventory flows, production scheduling, and raw material demand planning for low-voltage (LV) and medium-voltage (MV) electrical panels and switchgear manufacturing. In this role, you will work closely with procurement, factory operations, and engineering teams to ensure project materials arrive on time without causing production bottlenecks. Key Responsibilities Demand & MRP Analysis: Process engineering Bill of Materials (BOM) to calculate raw material needs, electrical components (breakers, busbars, relays), and hardware required for manufacturing. Inventory Control: Monitor raw material inventory levels, safety stock, and track lead times for imported and local components. Production Scheduling: Align material availability with factory master assembly schedules to prevent delays in sheet metal fabrication, panel wiring, and testing phases. Cross-Departmental Coordination: Partner with procurement teams to track purchase orders (POs) and align with warehouse teams on material receipts. System Data Maintenance: Enter, maintain, and audit master production data and inventory transactions within the company’s ERP system. Qualifications & Requirements Education: Bachelor’s degree in Industrial Engineering, Supply Chain/Logistics Engineering, Mechanical Engineering, or Electrical Power Engineering. Experience: Fresh Graduate (0 to 1 year of experience). Internship experience in a manufacturing plant or switchgear facility is a plus. Technical Skills:Strong knowledge of Supply Chain and MRP/Production Planning fundamentals. Proficiency in MS Excel (VLOOKUPs, Pivot Tables, Data Analysis). Basic familiarity with ERP software (SAP, Oracle, or Odoo). Soft Skills: High attention to detail, problem-solving skills, and effective communication skills. Languages: Good command of spoken and written English and Arabic. Mobility: Ability to work at the 10th of Ramadan City factory site. What We Offer Entry-level competitive salary package. Transportation / company bus routes to the factory. Social and medical insurance coverage. Professional training and hands-on exposure to global smart energy manufacturing standards. How to Apply Interested candidates can send their updated CV to:Email: recruitment@chint-egemac.com Subject Line: MRP Engineer - Fresh Grad - 10th of Ramadan
نبحث عن مندوب مبيعات داخلية طموح ومُنجز، متخصص في الذهب والفضة، للانضمام إلى فريقنا المتنامي في مدينة العاشر من رمضان، مصر. يجب أن يمتلك المرشح المثالي خبرة لا تقل عن 3 سنوات في المبيعات الداخلية، وفهمًا عميقًا لسوق المعادن الثمينة، وسجلًا حافلًا في بناء علاقات قوية مع العملاء وتحقيق أهداف المبيعات.<br>مندوب مبيعات داخلية (ذهب وفضة)الموقع: مدينة العاشر من رمضاننوع الوظيفة: دوام كاملالخبرة المطلوبة: 3 سنوات فأكثرالراتب: تنافسي<br>المسؤوليات الرئيسيةالتواصل مع العملاء: الرد على المكالمات والرسائل الإلكترونية واستفسارات العملاء، وتقديم المشورة المتخصصة بشأن منتجات الذهب والفضة.المبيعات وتحقيق الأهداف: تحديد احتياجات العملاء، وعرض المنتجات المناسبة، وإتمام عمليات البيع مع الالتزام بتحقيق أهداف المبيعات الشهرية أو تجاوزها باستمرار.معرفة المنتج: البقاء على اطلاع دائم بأسعار الذهب والفضة الحالية في السوق، ومستويات النقاء، والأوزان، ومواصفات المنتج.إدارة الطلبات: معالجة طلبات البيع، وإصدار عروض الأسعار، والتنسيق مع فريقي المخزون والخدمات اللوجستية لضمان التسليم في الوقت المحدد.إدارة علاقات العملاء: بناء علاقات طويلة الأمد مع تجار الجملة والتجزئة والمشترين الأفراد والحفاظ عليها لزيادة المبيعات المتكررة.الوعي بالسوق: مراقبة أسعار المنافسين واتجاهات السوق لتقديم رؤى تساعد على تحسين استراتيجيات المبيعات.التوثيق: الاحتفاظ بسجلات دقيقة للمبيعات، والعملاء المحتملين، وتفاعلات العملاء باستخدام نظام إدارة علاقات العملاء (CRM) الخاص بالشركة.<br>المؤهلات والمتطلباتالخبرة: خبرة لا تقل عن 3 سنوات في المبيعات الداخلية، ويفضل أن تكون في تجارة الذهب أو الفضة أو السبائك أو المجوهرات.التعليم: يفضل الحصول على درجة البكالوريوس في إدارة الأعمال أو التسويق أو المبيعات أو أي مجال ذي صلة. كما سيتم النظر في شهادة الثانوية العامة مع خبرة مناسبة.معرفة السوق: فهم قوي لأسعار الذهب والفضة، والقيراط، والأوزان، ومعايير الصناعة.مهارات التواصل: إجادة تامة للغة العربية والإنجليزية تحدثاً وكتابةً.مهارات البيع: مهارات تفاوض وإقناع وإتمام صفقات مثبتة، مع التركيز على خدمة العملاء.مهارات تقنية: إجادة استخدام برامج مايكروسوفت أوفيس (إكسل، وورد) وخبرة في برامج إدارة علاقات العملاء (CRM).الموقع: يجب أن يكون المتقدم مقيماً في مدينة العاشر من رمضان، مصر، أو على استعداد للتنقل إليها.<br>المزاياراتب تنافسي: راتب أساسي مجزٍالتأمين الاجتماعي: تغطية كاملة وفقاً لقانون العمل المصري.التطور الوظيفي: فرص للتطوير المهني والترقي الوظيفي داخل الشركة.بيئة عمل داعمة: انضم إلى فريق متعاون وذو خبرة في قطاع المعادن الثمينة.<br>كيفية التقديمندعو المرشحين المهتمين إلى إرسال سيرتهم الذاتية المحدثة إلى www.employme-egy.com/register/seekerملاحظة: سيتم التواصل فقط مع المرشحين الذين تم اختيارهم من خلال الموقع.
???? مطلوب للتعيين | محاسب تكاليف صناعية (Industrial Cost Accountant)<br>تعلن إحدى الشركات الكبرى بمدينة بلبيس - الشرقية عن حاجتها إلى محاسب تكاليف صناعية للانضمام إلى فريق العمل<br>???? المهام الوظيفية:حساب التكاليف الفعلية والمعيارية للمنتجات وتحليل انحرافات التكلفة.متابعة خطط الإنتاج وحساب تكلفة المنتجات تامة الصنع ومكوناتها.إعداد ومراجعة معايير تكلفة الخامات والكميات ومواصفات المنتجات.مقارنة التكاليف المعيارية بالتكاليف الفعلية بالاعتماد على تقارير الإنتاج والمخازن والجودة.إعداد التقارير اليومية والدورية والسنوية الخاصة بالتكاليف والإنتاج.متابعة وتحديث سجلات ومستندات التكاليف والتعاون مع المراجعة الداخلية.<br>???? المتطلبات: خبرة لا تقل عن سنتين في محاسبة التكاليف داخل المصانع – شرط أساسيخبرة في حساب وتحليل تكاليف الإنتاج والتصنيعخبرة في تحليل تكاليف الخامات والعمالة والمصروفات الصناعيةخبرة جيدة في استخدام برنامج Odooإجادة استخدام Excelمؤهل عالٍ في المحاسبة أو الماليةمهارات تحليلية ودقة في العمل<br><br>???? مواعيد العمل: اجازة اسبوعية الجمعة | من 8:00 صباحًا حتى 5:00 مساءً???? مكان العمل: منطقة انشاص الصناعية - بلبيس - الشرقية<br>???? للتقديم:يرجى إرسال السيرة الذاتية المحدثة على البريد الإلكتروني:nashwa@edu-castle.comمع كتابة "محاسب تكاليف" في عنوان البريد الإلكتروني.<br><br>#Accounting #Cost Accountant #Hiring #Accounting Jobs #Finance Jobs #Egypt Jobs #Accounting #Finance #Odoo #Jobs InEgypt #WeAre Hiring
Job Title: Quality Control (QC) Engineer – Electrical Company: CHINT EGEMAC for Electrical Products Location: Factory - 10th of Ramadan City, Egypt Department: Quality Assurance / Quality Control (QA/QC) Employment Type: Full-Time About CHINT EGEMACCHINT EGEMAC is a joint venture bringing together global electrical manufacturing standards and regional industry leadership. Operating out of state-of-the-art facilities, CHINT EGEMAC specializes in high-technology Low Voltage (LV) and Medium Voltage (MV) switchgear assemblies, power distribution panels, Motor Control Centers (MCC), and integrated power system solutions. Position Overview We are seeking a QC Engineer (Electrical) to join our manufacturing and assembly team at our 10th of Ramadan City factory. The ideal candidate will be responsible for ensuring that all low-voltage and medium-voltage equipment, component assemblies, and switchgear panels strictly meet international standards (IEC/IEEE), factory acceptance criteria, and ISO quality management frameworks. Key Responsibilities Inspection & Testing: Perform factory acceptance tests (FAT), routine testing, dielectric/hipot testing, contact resistance, and primary/secondary injection testing on LV & MV switchgears, MCCs, and control panels. Quality Assurance Audits: Execute Inspection and Test Plans (ITP) for incoming raw electrical components, sub-assemblies, wiring, and finished product panels. Non-Conformance Management: Identify, document, and manage Non-Conformance Reports (NCRs) during line assembly, conducting root-cause analysis (8D, CAPA) and coordinating corrective actions with production teams. Schematic & Blueprint Review: Verify panel assembly against single-line diagrams (SLDs), schematic drawings, bill of materials (BOM), and customer design specifications. ISO Compliance & Reporting: Maintain complete QA/QC documentation, calibration records of testing instruments, and factory quality logs according to ISO 9001, ISO 14001, and ISO 45001 standards. Vendor & Material Verification: Inspect raw materials and incoming components from suppliers to ensure adherence to technical requirements and CHINT global quality benchmarks. Qualifications & Requirements Education: Bachelor’s degree in Electrical Power Engineering or Electrical Engineering. Experience: 2 to 5 years of proven experience in Quality Control / Quality Assurance within an electrical panel builder, switchgear manufacturing, or transformer factory environment. Technical Expertise: Strong working knowledge of LV/MV switchgears (e.g., IEC 61439 standard), circuit breakers, busbars, power distribution panels, and protection relays. Testing Proficiency: Hands-on experience operating electrical test kits (megger, high-voltage testers, relay test sets, multimeters). Certifications: ISO 9001 internal auditor or ASQ Certified Quality Engineer (CQE) certification is an asset. Skills: Excellent schematic reading ability, analytical problem-solving, and good command of English (written and verbal). Work Conditions & Location Workplace: Factory-based role in 10th of Ramadan Industrial Zone. Transportation options or allowances provided according to company policy. How to Apply Qualified candidates are invited to submit their updated resume to recruitment@chint-egemac.com with the subject line:
We are looking for an experienced Quality Manager to lead and manage the complete Quality function at a manufacturing facility in 10th of Ramadan City. The Quality Manager will have overall responsibility for Quality Assurance (QA), Quality Control (QC), and the company’s ISO Management Systems, ensuring that products, manufacturing processes, and company procedures consistently meet customer requirements, internal standards, and applicable ISO requirements. Key Responsibilities:Lead the overall QA & QC functions across the company. Manage and develop the Quality team, including QC Engineers, Supervisors, Inspectors, and QA personnel. Lead the implementation, certification, maintenance, and continuous improvement of ISO 9001, ISO 14001 & ISO 45001 management systems. Ensure readiness for external certification, surveillance and customer audits, and lead internal audit programs. Ensure effective incoming, in-process and final product inspection and testing. Establish and maintain quality control plans, inspection standards, testing methods, SOPs and quality procedures. Monitor product quality, rejection, scrap, rework, FPY and other key Quality KPIs. Lead Root Cause Analysis, NCRs, CAPA and problem-solving activities for internal and customer quality issues. Lead investigation and closure of customer complaints, ensuring effective corrective actions and prevention of recurrence. Ensure products comply with customer specifications, drawings and applicable standards. Work closely with Production, Planning, Maintenance, R&D, Purchasing and other departments to improve process capability and product quality. Drive a strong quality culture on the shop floor, with regular production-floor follow-up rather than managing quality only through documentation. Coordinate with customers, suppliers, auditors and certification bodies on quality-related matters.<br>Job Requirements Bachelor’s degree in Engineering, Chemist or a relevant technical discipline.8–10 years of Quality experience in manufacturing, with proven experience in a managerial or leadership capacity. Strong practical experience with Quality Assurance and Quality Control, not only ISO documentation. Strong knowledge and hands-on implementation experience with ISO 9001. Experience with ISO 14001 and ISO 45001 is highly preferred. ISO 9001 Lead Auditor certification is preferred. Strong knowledge of RCA, CAPA, SPC, internal auditing, process control and continuous improvement, Lean Six Sigma. Experience dealing with customer complaints and external/customer audits. Experience in plastics, PVC, extrusion, rubber, home appliances components or similar manufacturing industries is an advantage. Strong leadership, communication, analytical and problem-solving skills. Good command of English and Microsoft Office; ERP Odoo experience is preferred. Location: 10th of Ramadan City Industry: PVC, Rubber & Gasket Manufacturing
<p><strong>Chema Foam</strong> is looking for a <strong>Talent Acquisition</strong> Specialist to support <strong>recruitment </strong>across our office and factory teams.<br> We’re looking for someone who can identify suitable candidates, coordinate the hiring process, and deliver a positive candidate experience.</p><p><strong>???? Key Responsibilities</strong></p><p>• Coordinate recruitment activities, from publishing vacancies and sourcing candidates to interviews and offer follow-up.<br>• Work with <strong>hiring managers</strong> to understand job requirements and update<strong> job descriptions.</strong><br>• Source candidates through LinkedIn, job boards, referrals, and other relevant <strong>channels</strong>.<br>• <strong>Screen </strong>CVs and conduct initial interviews to assess qualifications, interest, and role suitability.<br>• <strong>Schedule interviews</strong>, collect feedback, and keep candidates informed throughout the process.<br>• Build and maintain a candidate <strong>database </strong>for current and future vacancies.<br>• Maintain accurate<strong> recruitment records</strong> and prepare regular hiring updates.<br>• <strong>Coordinate </strong>with HR to ensure a smooth transition from offer acceptance to onboarding.</p><p><strong>Requirements</strong></p><p><strong>Required Qualifications</strong></p><p>• Bachelor’s degree in Human Resources, Business Administration, or a related field.<br>• <strong>1–2</strong> years of experience in <strong>recruitment or talent acquisition</strong>.<br>• Hands-on experience in candidate sourcing,<strong> CV screening</strong>, and initial interviews.<br>• Strong communication and interpersonal skills.<br>• Good organizational skills and the ability to<strong> manage multiple vacancies.</strong><br>• Good command of <strong>English </strong>and proficiency in Microsoft Office.<br>• Attention to detail and discretion when handling candidate information.</p>
About the Job<br>Elsewedy Print House is looking for an experienced Prepress Finalizer to join our technical and prepress team at our facility in 10th of Ramadan City.<br>The successful candidate will be responsible for reviewing, preparing, and finalizing artwork files before production, ensuring that all files meet the technical requirements of offset and digital printing.<br>Key Responsibilities<br>• Review customer artwork and ensure files are ready for printing<br>• Prepare and finalize files for offset and digital printing<br>• Check dimensions, resolution, fonts, links, colors, and image quality<br>• Prepare bleed, crop marks, cutting lines, white ink layers, and spot colors<br>• Review CMYK and Pantone color settings<br>• Apply overprint, trapping, and color separation when required<br>• Prepare imposition and production-ready PDF files<br>• Identify and correct technical errors before production<br>• Coordinate with the design, production, and printing departments<br>• Ensure files comply with printing and finishing requirements<br>• Maintain accuracy while working on multiple projects and deadlines<br>Job Requirements<br>• 3 to 5 years of experience in paper printing and prepress operations<br>• Proven experience as a Finalizer or Prepress Specialist<br>• Strong knowledge of offset and digital printing processes<br>• Proficiency in Adobe Illustrator, Adobe Photoshop, Adobe InDesign, and Adobe Acrobat<br>• Strong understanding of CMYK, Pantone, spot colors, and color separation<br>• Good knowledge of bleed, overprint, trapping, cutting lines, and print-ready files<br>• Understanding of different paper types and printing finishing techniques<br>• High attention to detail and strong problem-solving skills<br>• Ability to work under pressure and meet production deadlines<br>• Ability to communicate and work effectively within a team<br>Job Details<br>Work Location: 10th of Ramadan City, Egypt<br>Employment Type: Full-time<br>Experience Required: 3–5 years<br>Industry: Printing and Packaging<br>Job Function: Prepress / Printing Production
<p><strong>Job Responsibilities:</strong></p><p><strong>Functional Configuration: </strong></p><ol><li>Configure Oracle Financials modules, GL, AP, AR, Fixed Assets, and Cash Management, to fulfil business requirements and align with organizational processes.</li></ol><p><strong>Technical Development: </strong></p><ul><li>Design, develop, unit-test, and deploy technical components including Reports, Interfaces, Conversions, Extensions (RICE/RICEW), and Workflows using Oracle-standard toolsets.</li></ul><p><strong>Reporting & Dashboards: </strong></p><ul><li>Create and customize complex financial reports and dashboards using Oracle Reports and XML Publisher (BI Publisher), ensuring accuracy and executive-level presentation.</li></ul><p><strong>Production Support & Troubleshooting: </strong></p><ul><li>Provide day-to-day support for Oracle EBS Financials; diagnose and resolve issues, author SQL scripts, and manage Oracle Service Requests (SRs) through to resolution. </li><li>Analyze and resolve user issues related to financial transactions and system functionality.</li><li>Support month-end and year-end financial closing activities.</li></ul><p><strong>Project Lifecycle Participation: </strong></p><ul><li>Lead or contribute across all project phases including requirement gathering (RD50), functional design (MD50), technical design (MD70), system integration testing, and User Acceptance Testing (UAT).</li></ul><p><strong>Stakeholder Collaboration: </strong></p><ul><li>Work closely with finance business users, project managers, and cross-functional teams to translate business needs into supportable, scalable Oracle solutions. </li><li>Participate in ERP enhancement projects and process improvement initiatives.</li></ul><p><strong>Documentation & Compliance:</strong></p><ul><li>Maintain accurate documentation of system configurations and changes.</li><li>Assist in preparing test scripts and user acceptance testing (UAT) documentation.</li><li>Ensure compliance with internal controls, audit requirements, and IT governance standards.</li></ul><p><br></p><p><strong>Job Qualifications: </strong></p><ul><li>Bachelor’s degree in engineering, Computer Science, Information Technology, or any related field.</li><li>Oracle EBS Finance Functional or Technical certification is a plus.</li><li>Minimum 5+ years of hands-on experience in Oracle Database development and Oracle E-Business Suite (EBS) Finance implementations or support engagements<strong> </strong></li><li>Deep functional understanding of finance processes across General Ledger (GL), Accounts Payable (AP), Accounts Receivable (AR), Fixed Assets (FA), and Cash Management (CM)</li></ul><p><br></p><p><strong>Job Location: </strong>10th of Ramadan/New Cairo</p>
About Minapharm:Minapharm Pharmaceuticals is a leading pharmaceutical company in Egypt and the Middle East and the largest end-to-end manufacturer of biological therapies in MEA with over 20 years of experience in cellular and bioprocess engineering. Headquartered in Cairo, Minapharm commercializes over 100 life-saving and life-enhancing products ranging from small molecules to complex bioengineered proteins and viral vectors, with an impressive immunotherapy pipeline. Together with its wholly-owned Berlin-based subsidiary, Pro Bio Gen AG - a world-leading CDMO, Minapharm has established an integrated business model making it the only gene-to-market company in the region. Consolidating its international platform of intelligent biopharmaceutical technologies with the longstanding process development and manufacturing expertise in the MEA, Minapharm, together with Pro Bio Gen, has incorporated MiGen Tra Gmb H headquartered in Berlin and manufacturing in Cairo, to enhance the accessibility to critical healthcare transforming medicines through product development and commercialization of Biosimilar m ABs, Cell, and Gene Therapies and vaccines, at affordable prices in Egypt, and MEA.<br>Our Values:· Diversity & Respect· Integrity & Accountability· Collaboration· Leadership & Empowerment· Innovation & Continuous Learning<br>Job Summary:Responsible for analysis of raw materials, intermediates and finished products in strict timescales in order to support the business requirements. Supports the new formulations/finished products stability program. Responsible for executing all activities related to R&D analysis lab.<br><br>Duties:1. Creating and executing method development and method validation test protocols for finished products and generating the appropriate analytical methods.2. Creating and following up maintenance plan for all instruments in R&D analysis lab.3. Securing & following up availability of all analytical resources (Columns, reference standards, reagents, solvents …..etc).4. Sampling and testing of raw materials, intermediates and finished products using current pharmacopoeias, any associated ‘wet’ chemistry and instrumental techniques (HPLC, IR, UV), as appropriate.5. Preparing R&D reports, including analytical reports (for raw materials and finished products), Certificates of Analysis (CoA) (for finished products) and stability reports.6. Stability testing of products for new formulations and ongoing stability trials, using physical (p H, viscosity) and instrumental (HPLC, UV) techniques, as appropriate.7. Writing/reviewing Standard Operating Procedures (SOPs).8. Supervise, develop and train R&D analysts.9. Ensuring good relations and communications with all members of the team and responding politely and in a timely fashion.10. Observing and complying with Good Manufacturing Practice (GMP) and Good Laboratory Practice (GLP).11. Observing and complying with company Health and Safety Policies.12. Observing and complying with company Standard Operating Procedures (SOPs).13. Undertaking any other duties, either for this department or any other department within the business, which may be requested by the Line Manager, for which training and/or an explanation has been provided and understood.<br>Job Requirements:Experience: 6 - 9 years of Experience. Education: Bachelor’s degree in Pharmaceutical Science. Training: . Analytical method validation.. Development of analytical methods.<br>Knowledge:Highly proficient in the use of key analytical equipment (HPLC, GC, IR, UV) and the testing of finished products.
About Minapharm:Minapharm Pharmaceuticals is a leading pharmaceutical company in Egypt and the Middle East and the largest end-to-end manufacturer of biological therapies in MEA with over 20 years of experience in cellular and bioprocess engineering. Headquartered in Cairo, Minapharm commercializes over 100 life-saving and life-enhancing products ranging from small molecules to complex bioengineered proteins and viral vectors, with an impressive immunotherapy pipeline. Together with its wholly-owned Berlin-based subsidiary, Pro Bio Gen AG - a world-leading CDMO, Minapharm has established an integrated business model making it the only gene-to-market company in the region. Consolidating its international platform of intelligent biopharmaceutical technologies with the longstanding process development and manufacturing expertise in the MEA, Minapharm, together with Pro Bio Gen, has incorporated MiGen Tra Gmb H headquartered in Berlin and manufacturing in Cairo, to enhance the accessibility to critical healthcare transforming medicines through product development and commercialization of Biosimilar m ABs, Cell, and Gene Therapies and vaccines, at affordable prices in Egypt, and MEA.<br>Our Values:· Diversity & Respect· Integrity & Accountability· Collaboration· Leadership & Empowerment· Innovation & Continuous Learning<br>Job Summary:Responsible for analysis of raw materials, intermediates and finished products in strict timescales in order to support the business requirements. Supports the new formulations/finished products stability program. Responsible for executing all activities related to R&D analysis lab.<br><br>Duties:1. Creating and executing method development and method validation test protocols for finished products and generating the appropriate analytical methods.2. Creating and following up maintenance plan for all instruments in R&D analysis lab.3. Securing & following up availability of all analytical resources (Columns, reference standards, reagents, solvents …..etc).4. Sampling and testing of raw materials, intermediates and finished products using current pharmacopoeias, any associated ‘wet’ chemistry and instrumental techniques (HPLC, IR, UV), as appropriate.5. Preparing R&D reports, including analytical reports (for raw materials and finished products), Certificates of Analysis (CoA) (for finished products) and stability reports.6. Stability testing of products for new formulations and ongoing stability trials, using physical (p H, viscosity) and instrumental (HPLC, UV) techniques, as appropriate.7. Writing/reviewing Standard Operating Procedures (SOPs).8. Supervise, develop and train R&D analysts.9. Ensuring good relations and communications with all members of the team and responding politely and in a timely fashion.10. Observing and complying with Good Manufacturing Practice (GMP) and Good Laboratory Practice (GLP).11. Observing and complying with company Health and Safety Policies.12. Observing and complying with company Standard Operating Procedures (SOPs).13. Undertaking any other duties, either for this department or any other department within the business, which may be requested by the Line Manager, for which training and/or an explanation has been provided and understood.<br>Job Requirements:Experience: 6 - 9 years of Experience. Education: Bachelor’s degree in Pharmaceutical Science. Training: . Analytical method validation.. Development of analytical methods.<br>Knowledge:Highly proficient in the use of key analytical equipment (HPLC, GC, IR, UV) and the testing of finished products.
Key Responsibilities Lead and oversee daily maintenance activities, ensuring high equipment availability, reliability, and operational performance across cable manufacturing processes. Drive effective execution of preventive, predictive, and corrective maintenance programs to minimize downtime and maximize asset utilization. Manage and continuously improve maintenance programs through CMMS platforms, ensuring timely completion of scheduled maintenance activities and adherence to maintenance standards. Monitor and optimize inspection and maintenance schedules for critical production equipment and utilities. Lead, coach, and develop maintenance supervisors, engineers, and technicians across multiple shifts. Foster a culture of accountability, technical excellence, continuous learning, and safety within the maintenance organization. Coordinate rapid response to equipment failures and breakdowns while ensuring effective root cause analysis and corrective action implementation. Balance reactive maintenance requirements with proactive reliability improvement initiatives to reduce unplanned downtime. Oversee spare parts planning, inventory optimization, and critical stock availability to support maintenance requirements while controlling costs. Collaborate with procurement and engineering teams to improve equipment lifecycle performance and maintenance efficiency. Ensure full compliance with HSE policies, procedures, and regulatory requirements. Enforce safe maintenance practices, including Lockout/Tagout (LOTO), electrical safety, and risk management protocols. Monitor maintenance KPIs including MTBF, MTTR, equipment availability, maintenance costs, and schedule compliance. Identify and drive continuous improvement initiatives to enhance productivity, reliability, and operational excellence.<br>Qualifications Bachelor's degree in Mechanical, Electrical, Mechatronics, or Industrial Engineering.6–10 years of progressive experience in industrial plant maintenance within a heavy manufacturing environment. Strong knowledge of CMMS, preventive maintenance, predictive maintenance, TPM, Root Cause Analysis (RCA), and reliability methodologies. Proven experience managing maintenance teams in a fast-paced manufacturing environment. Strong leadership, problem-solving, planning, and stakeholder management skills.
About us:<br>Elsewedy Electric: Powering Progress, Empowering People<br>For over 80 years, Elsewedy Electric has been a leading manufacturer of electrical products and solutions, operating in 19 countries with over 18,000 employees. We offer a diverse range of products across wire & cable, electrical equipment, engineering & construction, digital solutions, and infrastructure investments. Beyond our manufacturing prowess, we're passionate about creating a positive and empowering work environment for our team. We foster a culture of diversity, inclusion, and continuous learning, providing opportunities for professional development and career growth. Our commitment to employee well-being extends beyond compensation with initiatives promoting work-life balance and overall well-being. Join us and be part of a company that's not just powering progress, but empowering people to build a brighter future.<br>This job opportunity is offered by Elsewedy Electric Graduate Development Program The program is designed for Graduates with 0-2 years of experience. The program offers various job rotations, mentorships, coaching & trainings. 2024 & 2025 Graduates are welcomed to apply.<br>Key Responsibilities:<br>Monitor shop floor quality control activities and inspectors. Prepare documents and requirements for internal and external audits. Ensure compliance with customer identification requirements. Follow up on sample selection and in-process testing activities. Ensure proper segregation of non-conforming products. Participate in non-conformance (NC) investigations and PDCA reporting. Monitor calibration and verification of testing equipment. Support quality management system implementation and compliance.<br>Requirements:<br>Academic Qualifications: Bachelor’s degree in Electrical Engineering or any related field. Language Proficiency: Fluent in English (spoken and written) Years of Experience: 0-2 Years of experience in the same field. Computer/Technical Skills: Advanced Excel - Microsoft Word – Power Point - Quality Control Procedures (QCP)- Measuring tools and inspection techniques
We are looking for an experienced Quality Manager to lead quality systems and product/process quality within a manufacturing environment, with a strong focus on building and continuously improving the factory’s Quality Management System.<br>Key Responsibilities:Lead and continuously improve the factory Quality Management System. Drive product and process quality across incoming, in-process and final inspection/testing. Establish quality standards, inspection criteria, Control Plans and process controls. Lead root-cause analysis, corrective actions, 8D and continuous-improvement initiatives. Manage PFMEA, SPC, MSA, audits, nonconformities and quality KPIs. Coordinate customer and certification audits and follow up on findings. Oversee supplier quality, incoming material quality, calibration and nonconforming products. Support APQP/PPAP and new product/production launches where applicable. Lead, coach and develop the Quality team. Work closely with Production and other departments while maintaining independent quality judgment.<br>Requirements:Bachelor’s degree in Electrical, Mechanical, Production, Industrial or related Engineering discipline.8–12 years of manufacturing quality experience, including 3+ years in a supervisory/managerial role. Strong preference for Automotive, Wire Harness, Cable Assembly, Automotive Electrical Components or high-volume discrete manufacturing. Strong practical knowledge of ISO 9001; IATF 16949 is strongly preferred. Hands-on knowledge of PFMEA, Control Plans, SPC, MSA, 8D, 5 Why and Fishbone. APQP/PPAP and IPC/WHMA-A-620 knowledge is a strong advantage. Strong shop-floor presence and ability to build quality systems and teams in an early-stage manufacturing environment. Good professional English.<br>???? Location: 10th of Ramadan City, Egypt<br>Apply Now! Technical Quality Manager KEY RECRUITERS | Career Page
GENERAL DESCRIPTION (Outsouce)<br>The ideal candidate will be crucial in maintaining and enhancing our product quality through effective quality control and assurance processes. If you are a detail-oriented professional with a strong background in engineering, measurement techniques, and internal auditing, we encourage you to apply for this exciting opportunity. <br>DUTIES AND RESPONSIBILITIES INCLUDE (BUT ARE NOT LIMITED TO)<br>Quality Control:Experience in quality control in a manufacturing environment, including mechanical measurements, reading drawings, and taking appropriate measurements. Strong knowledge of measuring techniques used to evaluate the quality and performance of products. This includes selecting and operating measuring devices to ensure accurate and reliable measurements. Establish and maintain an internal calibration program for measuring devices; conduct regular calibration checks and document results to ensure precision. Develop and maintain documentation procedures for quality control processes. Generate reports on inspection results, identifying areas for improvement.<br>Quality Assurance:Manage and organize quality-related documentation, including reports and test results. Implement effective document control measures to track revisions and updates. Conduct internal audits to assess compliance with ISO 9001 standards, identify areas for improvement, and collaborate with teams to implement corrective actions. Problem-solving attitude (Control, investigate, resolve, and report on Quality Complaints, internal and external).<br>BEHAVIORAL ATTRIBUTES (CUSTOMER FOCUS, RESULTS ORIENTATION, PRIORITIZATION AND PLANNING, COLLABORATION AND TEAMWORK, CONFLICT MANAGEMENT, EFFECTIVE COMMUNICATION, DELEGATION SKILLS, DEVELOPING TRUST, BUSINESS ACUMEN …) Detail-oriented with a commitment to accuracy and precision. Strong analytical and problem-solving skills. Effective communication and interpersonal skills. Ability to work collaboratively in cross-functional teams. Proactive attitude towards continuous improvement.<br>work experience requirements Minimum experience of 5 years in the same field. Proven experience in quality control and quality assurance roles. Familiarity with ISO 9001 standards and experience in conducting internal audits. Demonstrated expertise in reading and interpreting engineering drawings. Experience in implementing and maintaining internal calibration programs. Solid track record in managing and organizing quality-related documentation.education requirements Bachelor's degree in engineering or a related field.
Receive email alerts for Software Tester Jobs jobs
You can cancel your email alert at anytime