General builder Jobs

<p>&nbsp;</p><p><strong>The Factory Manager</strong> is responsible for leading and managing all manufacturing operations within the LV electrical panel production facility. The role ensures safe, efficient, and profitable manufacturing of low-voltage switchboards,&nbsp;distribution boards, and electrical control panels while maintaining compliance with quality standards, project specifications, customer requirements, and delivery commitments.</p><p>The Factory Manager oversees production, engineering technical office (electrical,&amp; mechanical), planning, maintenance, inventory control, and workforce management to achieve operational excellence and business objectives.</p><p><strong>Key Responsibilities</strong></p><p><strong>Production &amp; Operations Management</strong></p><ul><li>Lead the overall factory operations for LV panel manufacturing.</li><li>Ensure achievement of production schedules and delivery deadlines.</li><li>Monitor production capacity and optimize resource allocation.</li><li>Manage fabrication, assembly, wiring, testing, and packing activities.</li><li>Ensure compliance with approved drawings, specifications, and customer requirements.</li><li>Improve manufacturing efficiency and productivity.</li></ul><p><strong>Project &amp; Planning Coordination</strong></p><ul><li>Coordinate closely with Engineering, Projects, Procurement, and Sales teams.</li><li>Review production plans based on project priorities and delivery schedules.</li><li>Monitor work-in-progress (WIP) and production progress.</li><li>Resolve production bottlenecks and resource constraints.</li></ul><p><strong>Quality Management</strong></p><ul><li>Ensure panels are manufactured according to IEC standards and customer specifications.</li><li>Oversee factory acceptance testing (FAT) activities.</li><li>Ensure compliance with ISO quality procedures.</li><li>Lead corrective and preventive action initiatives.</li><li>Reduce quality defects, rework, and customer complaints.</li></ul><p><strong>Health, Safety &amp; Environment (HSE)</strong></p><ul><li>Ensure safe working practices throughout the factory.</li><li>Maintain compliance with local regulations and company HSE policies.</li><li>Conduct safety audits and risk assessments.</li><li>Lead accident investigations and corrective actions.</li></ul><p><strong>Team Management</strong></p><ul><li>Lead production supervisors, engineers, technicians, and operators.</li><li>Lead Technical office team(mechanical&amp; electrical)</li><li>Establish performance objectives and KPIs.</li><li>Identify training and development needs.</li><li>Drive employee engagement and accountability.</li></ul><p><strong>Continuous Improvement</strong></p><ul><li>Implement Lean Manufacturing and 5S initiatives.</li><li>Improve production processes and workflow efficiency.</li><li>Reduce waste, downtime, and manufacturing costs.</li><li>Promote a culture of continuous improvement.</li></ul><p><strong>Inventory &amp; Material Management</strong></p><ul><li>Monitor material consumption and inventory levels.</li><li>Coordinate with procurement to ensure timely material availability.</li><li>Minimize material shortages and excess inventory.</li><li>Control production-related costs and waste.</li></ul><p><strong>Maintenance Management</strong></p><ul><li>Ensure preventive and corrective maintenance programs are effective.</li><li>Maintain production equipment, testing instruments, and manufacturing tools.</li><li>Reduce equipment downtime and improve reliability.</li></ul><p><strong>Financial Management</strong></p><ul><li>Manage factory budgets and operational expenses.</li><li>Monitor manufacturing costs and profitability.</li><li>Support annual budgeting and forecasting processes.</li><li>Identify cost-saving opportunities without compromising quality.</li></ul><p><strong>Qualifications</strong></p><ul><li>Bachelor's Degree in Electrical Engineering, Industrial Engineering, or related discipline.</li><li>MBA or Operations Management qualification is an advantage.</li><li>Lean Manufacturing and Six Sigma certifications preferred.</li></ul><p><strong>Experience</strong></p><ul><li>10+ years of experience in electrical panel manufacturing.</li><li>Minimum 5 years in a Factory Manager, Production Manager, or Operations Manager role.</li><li>Proven experience in LV switchgear, control panels, and distribution boards manufacturing.</li><li>Experience managing large production teams and project-based manufacturing environments.</li></ul><p><strong>Technical Knowledge</strong></p><ul><li>LV Switchboards and Distribution Boards.</li><li>Synchronization and ATS Panels.</li><li>Electrical drawings and schematics.</li><li>Factory Acceptance Testing (FAT).</li><li>ERP/MRP systems.</li><li>Lean Manufacturing and Kaizen methodologies.</li></ul><p><strong>Key Competencies</strong></p><p><strong>Leadership</strong></p><ul><li>Team leadership and development.</li><li>Performance management.</li><li>Change management.</li></ul><p><strong>Operational Excellence</strong></p><ul><li>Production planning.</li><li>Process optimization.</li><li>Resource management.</li></ul><p><strong>Business Skills</strong></p><ul><li>Budget control.</li><li>Cost reduction.</li><li>KPI management.</li></ul><p>&nbsp;</p><p><br>&nbsp;</p><p>&nbsp;</p>

<p>Responsibilities</p><p>- Develop and maintain accurate BIM models for civil/structural projects.</p><p>- Prepare and update technical drawings and project documentation.</p><p>- Coordinate BIM models with other disciplines to identify and resolve clashes.</p><p>- Review drawings and models to ensure accuracy and compliance with project requirements.</p><p>- Collaborate with engineers, architects, and project teams.</p><p>- Assist in BIM coordination and project deliverables.</p><p>- Follow project standards, specifications, and BIM procedures.</p><p>&nbsp;</p><p>Requirements</p><p>- Bachelor’s degree in Civil Engineering.</p><p>- 2–4 years of relevant experience in BIM.</p><p>- Strong knowledge of BIM processes and coordination.</p><p>- Proficiency in relevant BIM software such as Revit and AutoCAD.</p><p>- Good understanding of civil/structural drawings and construction details.</p><p>- Strong attention to detail and problem-solving skills.</p><p>- Good communication and teamwork skills.</p><p>&nbsp;</p>

مطلـوب لكبرى مصانع مواد البناء والحجر الطبيعي بالسعودية .. الرياض :<br>????1 -مشرف مبيعات مواد بناء ✅- شرط خبرة في مجال مواد البناء ،،،، حجر طبيعي ... بلاط أرضيات اسمنتيات أرصفه خارجيه ..الخ✅-حاصل مؤهل عالى او فوق متوسط✅-خبره تترواح ٣ - ٧ سنوات بالمبيعات✅- لباقه بالكلام✅-قوه في الإقناع✅-حسن المظهر✅-اساسيات لغة إنجليزيه ( مقبول )✅- رخصه قياده سياره<br> بادر بإرسال السيرة الذاتية m.hr@eltaef.com<br>للاستفسار :01002179334

About Veritas We’re a creative growth and marketing company focused on building high-performing digital experiences and conversion-focused funnels for brands and creators. We work fast, value strong execution, and care deeply about user experience, performance, and design quality. <br>Role Overview We’re looking for an experienced Funnel Builder to support funnel builds and deployment across multiple brands and campaigns. This role is focused on taking designs from Figma and turning them into polished, responsive, and high-performing funnels. The ideal candidate is highly skilled in funnel building, understands how to improve designs during implementation, and has a strong eye for responsiveness, usability, and performance. <br>Key Responsibilities Build and deploy funnels for brands and campaigns Translate Figma designs into fully functional and responsive funnel pages Improve layouts and visual presentation during funnel implementation Optimize funnels for responsiveness across desktop, tablet, and mobile Improve load speed and overall funnel performance Conduct A/B testing and implement funnel improvements Troubleshoot and resolve funnel-related issues quickly and efficiently Collaborate with internal teams to execute funnel projects on time <br>Qualifications Strong hands-on experience building and deploying funnels Must be highly proficient in Figma Strong understanding of responsive design and mobile optimization Experience with A/B testing funnels Ability to improve and refine designs during implementation Strong attention to detail and execution quality Understanding of load speed optimization and performance best practices Ability to work independently and manage multiple funnel builds when needed Good communication and responsiveness <br>What We Offer Opportunity to work across multiple brands and campaigns Fast-paced and collaborative creative environment Direct impact on funnel performance and user experience<br>How to Apply:Please note that only candidates who complete the application form will be considered for screening. Position: Remote, Contract Apply here: https://forms.gle/GFYxBcZ78K77j Qz88Only shortlisted candidates will be contacted.

Company Description Innovative Systems (ISys) delivers tailored technology solutions that address the specific needs and investment priorities of its customers. Based in Riyadh, Saudi Arabia, ISys focuses on providing cutting-edge technological offerings supported by strong, responsive service. The company collaborates with a network of technology and business partners around the world, enabling access to advanced tools and expertise. This global reach allows ISys to design and implement solutions that are closely aligned with each customer’s technical and operational requirements.???? ???????????? ????????????????????????????????????????????????????????????????: ✔ Study the project's technical documents and specifications, drawings, and relay metering to define the exact customer's requirements. ✔ Preparation of Base Design drawing for approval (SLD, general arrangement drawings, plan, view arrangement, Ring Circuit Diagram, Interlocking Logic, list of Equipment, AC/DC Load Calculation, heat dissipation, and Protection Relay & Metering Schedule) ✔ Preparation of detailed design drawings for customer approval. Complete schematic diagram, CT/VT diagrams, equipment diagram, and terminal diagram. ✔ Preparation of manufacturing drawings is needed to start fabrication at the factory. ✔ Preparation of manufactured drawings & as-built drawings after incorporating site feedback with related interfaces. ✔ Supervision for Engineers (Junior) scope of work. ✔ Design, develop, and maintain electrical systems and components. ✔ Ensure compliance with electrical standards. ???? ????????????????????????????????????????????????????????: ✔ Bachelor's degree in electrical engineering. ✔ 6–10 years of overall experience, including a minimum of 3 years of experience in HV Control & Protection Design. ✔ Familiarity with SEC and National Grid standards & practices is preferred ✔ Strong attention to detail and commitment to quality. ✔ Analytical thinking and troubleshooting skills. ✔ Ability to work in a fast-paced and dynamic environment

<p> <strong>Up to EUR 25,000 </strong>per year, on a full time, contractor contract</p><p> Fully remote working anywhere in Egypt!</p><p>✨ Exciting high growth product, relied on by leading global brands, particularly within sports</p><p> Working with the latest hardware, tech stack and tools</p><p><br></p><p><strong>The working hours are flexible however primarily aligning with UK working hours across weekdays.</strong></p><p><br></p><p><strong>ABOUT US</strong></p><p><br></p><p>Storyteller is a high growth B2B SaaS platform which allows companies to integrate Stories into their owned and operated platforms. Popularized by Instagram and Snapchat, Stories are perfectly suited for boosting user engagement, audience retention, and driving advertising revenue. For customers, building their own stories experience can take years and a lot of investment however Storyteller has solved this by allowing companies to integrate in days, not years all for one monthly cost.</p><p><br></p><p>Our end‑to‑end platform gives companies a best‑in‑class Stories experience in days with native iOS, Android, and Web SDKs, publishing tools, analytics, and ad support.</p><p><br></p><p>We work with many globally recognised clients, particularly within sport, so if you're a sporting fan this could be a great fit!</p><p><br></p><p><strong>What You'll Make Happen </strong></p><p><br></p><p>You’ll join a fast-paced team that values ownership, clarity, and shipping. You’ll work remotely, collaborate with leading sports organisations, and be embedded in one or more products, helping shape how they use and evolve our product suite.</p><p><br></p><p>This role sits at the intersection of AI, automation, and product ownership. There’s no central project manager - you’ll be expected to spot problems, decide what’s worth fixing, and help build the solutions. You don’t need years of product experience, but you do need curiosity, good judgement, and the willingness to get your hands dirty.</p><p><br></p><p><strong>What You'll Do</strong></p><ul><li>Own AI-driven workflows and product improvements within specific parts of the product suite.</li><li>Identify friction in how clients and teams use the product and propose solutions.</li><li>Build and iterate on AI-powered automations, tools, and workflows to improve delivery and outcomes.</li><li>Be responsible for deciding what matters within your product area, not just executing predefined tasks.</li><li>You’ll translate real client and usage problems into shipped product improvements, not decks or specs.</li><li>Use AI and internal tools to investigate product behaviour, debug issues, and test ideas.</li><li>Work directly with engineers to ship changes and improvements.</li><li>Engage with clients when needed to understand real problems and validate solutions.</li></ul><p><br></p><p><strong>What We're Looking For </strong></p><ul><li>Hands-on experience building or running AI-powered workflows, automations, or systems in a product or SaaS environment - or strong transferable experience with clear evidence you learn fast by building.</li><li>Enough product judgement to decide what’s worth working on and when, balancing user needs, technical constraints, and speed.</li><li>Comfort owning a problem end-to-end: from identifying the issue, to prototyping a solution, to working with developers to ship it.</li><li>Genuine interest in AI beyond surface-level use - you’ve used AI to build, automate, or meaningfully change workflows, not just to brainstorm or write docs.</li><li>Willingness to get into the weeds: prompts, tools, data, investigations, and iteration.</li><li>Strong communication skills across technical and non-technical teams, including clients when needed.</li><li>Comfortable working with data and structured information to inform decisions.</li><li>High ownership mindset - you don’t wait for tickets or roadmaps to tell you what to do.</li><li>Able to operate across multiple workstreams in a fast-moving environment.</li><li>Reliable internet for remote work.</li></ul><p><br></p><p><strong>RECRUITMENT PROCESS</strong></p><p><br></p><p>First, you’ll be invited for a 15-minute chat, we’ll explain the role better and answer your questions.</p><p><br></p><p>We’ll then invite you to do a take home task (we’ll compensate you regardless of outcome) and then it’s just a final interview with the team.</p><p><br></p><p>And that’s it!</p>

Main Job Duties and Responsibilities:<br>Plan Construction Operations: Plan all construction operations and schedule intermediate phases to ensure deadlines are met Budget Preparation: Prepare and submit construction project budget estimates Contract Management: Follow up on contracts and ensure targets are achieved Progress Monitoring and Reporting: Prepare progress reports and issue progress schedules to the Project Manager (PM) Site Supervision: Supervise and manage day-to-day construction site activities, ensuring adherence to project plans and schedules Construction Execution: Implement construction methodologies, work programs, and resource allocations to meet project objectives Coordination: Coordinate with Project Managers, Engineers, and subcontractors to ensure effective execution of works Performance Monitoring: Monitor site progress, productivity, and performance against project milestones Quality Assurance: Ensure compliance with design specifications, quality standards, and building codes Health, Safety & Environment (HSE): Enforce HSE regulations across all construction activities Technical Review: Review and approve method statements, shop drawings, and work permits related to construction works Resource and Logistics Management: Manage site logistics, manpower distribution, and material utilization Risk Management: Identify potential risks and delays and propose solutions to keep the project on track Inspection and Quality Control: Conduct site inspections and quality checks, ensuring corrective actions are implemented when required Stakeholder Communication: Maintain strong communication between site teams, consultants, and project management Documentation and Handover Support: Support the preparation of progress reports, project documentation, and handover requirements<br>Job Requirements Educational Background and Previous Experiencebachelor’s Degree in Civil Engineering Minimum of 10 years of relevant professional experience in the construction industry. At least 5 years of experience in a managerial or leadership role.<br>Knowledge and Functional Skills Strong management and leadership skills. Proven project management capability. Sound business and commercial acumen. Extensive technical knowledge and construction experience. Analytical mindset with strong problem-solving ability. Excellent communication and presentation skills. Effective time management and organizational skills. High attention to detail and accuracy. Exceptional interpersonal and relationship-building skills. Excellent written and verbal communication skills.

<ul><li><span>Manage and supervise civil construction activities for underground cable projects.</span></li><li><span>Coordinate excavation, trenching, duct banks, joint bays, manholes, cable corridors, road crossings, and reinstatement works.</span></li><li><span>Plan and monitor daily construction activities and ensure achievement of project milestones.</span></li><li><span>Coordinate with Project Manager, Construction Manager, Engineering, Planning, QA/QC, HSE, and Cable Installation teams.</span></li><li><span>Supervise and manage civil subcontractors and site construction teams.</span></li><li><span>Monitor manpower, equipment, materials, and productivity at site.</span></li><li><span>Review approved drawings, method statements, ITPs, and construction procedures before execution.</span></li><li><span>Coordinate RFIs, technical queries, design clarifications, and site-related engineering issues.</span></li><li><span>Ensure civil works are executed in accordance with project specifications and approved standards.</span></li><li><span>Coordinate inspections with QA/QC, client, and consultant and ensure timely closure of NCRs and observations.</span></li><li><span>Ensure compliance with HSE requirements, excavation safety, permits, temporary works, and site safety procedures.</span></li><li><span>Monitor construction progress against the approved baseline schedule and identify potential delays.</span></li><li><span>Coordinate work fronts and interfaces between civil construction and underground cable installation activities.</span></li><li><span>Coordinate with authorities, utilities, consultants, and other stakeholders as required.</span></li><li><span>Prepare and review daily, weekly, and monthly construction progress reports.</span></li><li><span>Support the Construction Manager in resource planning, cost control, and productivity improvement.</span></li><li><span>Monitor subcontractor performance and ensure compliance with contractual and project requirements.</span></li><li><span>Support preparation of as-built drawings, handover documentation, and project close-out activities.</span></li><li><span>Identify construction risks, constraints, and potential delays and implement appropriate corrective actions.</span></li><li><span>Ensure proper coordination and handover of completed civil work fronts for cable installation.</span></li><li><span>Support the Construction Manager in achieving project targets for <strong>Safety, Quality, Cost, and Schedule</strong>.</span></li></ul>

Company Description:DISTY 360 is a leading regional distributor of engineering and construction software solutions across the Middle East and Africa. The company focuses on delivering cutting-edge digital tools that help construction and engineering firms work more efficiently and effectively. DISTY 360 aims to be the trusted partner for organizations seeking reliable, innovative software that supports complex projects. The team is committed to building long-term client relationships through exceptional value, technical expertise, and a culture of trust and collaboration.<br>Role Description: The Digital Construction Engineer is a full-time, on-site role based in New Cairo. This role is responsible for supporting clients in implementing and optimizing construction and engineering software solutions, including interpreting construction drawings and translating project requirements into digital workflows. Day-to-day tasks include collaborating with client engineering teams, reviewing civil and construction plans, and advising on best practices for digital project management and equipment utilization. The individual will perform on-site inspections and assessments to ensure that software solutions align with actual field conditions and project specifications. The role also involves providing technical training, documentation, and ongoing support to help clients maximize the value of DISTY 360’s solutions.<br>Qualifications Strong background in Construction Engineering and Civil Engineering, with the ability to apply these disciplines to digital tools and workflows. Proficiency in reading and interpreting Construction Drawings and translating them into accurate models, plans, and software configurations. Knowledge of Heavy Equipment operations and integration with construction planning and management systems. Experience in Inspection activities, including site visits, quality checks, and verification of compliance with project specifications. Bachelor’s degree in Civil Engineering, Construction Engineering, or a related field. Familiarity with construction and engineering software platforms (e.g., BIM tools, project management systems) and an interest in digital transformation. Strong analytical, problem-solving, and communication skills, with the ability to work collaboratively with technical and non-technical stakeholders. Ability to work on-site in New Cairo and visit client locations as needed.

Company Description Innovative Systems (ISys) delivers tailored engineering and technology solutions that address the specific needs of each customer, with a strong focus on value, performance, and reliability. Based in Riyadh, Saudi Arabia, ISys collaborates with a broad network of technology and business partners around the world. This global reach allows the company to bring advanced, cutting-edge technologies to regional and international markets. ISys emphasizes high-quality support services, ensuring solutions are effectively implemented and maintained. The organization offers a dynamic environment for professionals interested in modern electrical and control systems and customer-focused innovation.???? ???????????? ????????????????????????????????????????????????????????????????: ✔ Study the project's technical documents and specifications, drawings, and relay metering to define the exact customer's requirements. ✔ Preparation of Base Design drawing for approval (SLD, general arrangement drawings, plan, view arrangement, Ring Circuit Diagram, Interlocking Logic, list of Equipment, AC/DC Load Calculation, heat dissipation, and Protection Relay & Metering Schedule) ✔ Preparation of detailed design drawings for customer approval. Complete schematic diagram, CT/VT diagrams, equipment diagram, and terminal diagram. ✔ Preparation of manufacturing drawings is needed to start fabrication at the factory. ✔ Preparation of manufactured drawings & as-built drawings after incorporating site feedback with related interfaces. ✔ Supervision for Engineers (Junior) scope of work. ✔ Design, develop, and maintain electrical systems and components. ✔ Ensure compliance with electrical standards. ???? ????????????????????????????????????????????????????????: ✔ Bachelor's degree in electrical engineering. ✔ +5 years’ experience in MV/HV electrical design, protection relays for different manufacturers, metering devices, communication protocols, etc. ✔ Familiarity with SEC and National Grid standards & practices is preferred ✔ Strong attention to detail and commitment to quality. ✔ Analytical thinking and troubleshooting skills. ✔ Ability to work in a fast-paced and dynamic environment

<p>We are seeking a creative and detail-oriented Static Graphic Designer to join Design Team for one of our clients . The ideal candidate will be responsible for creating engaging visual assets across digital and offline channels, supporting marketing campaigns, CRM communications, product promotions, and brand initiatives. The designer will play a key role in developing compelling creative concepts while ensuring brand consistency across all touchpoints.</p><p>Key Responsibilities</p><ul><li>Design high-quality visual assets for Paid Social, In-App Ads, SEM campaigns, and Display Advertising.</li><li>Create creative assets for CRM campaigns, customer journeys, and lifecycle marketing communications.</li><li>Design email creatives and marketing newsletters.</li><li>Develop print and offline branding materials including posters, flyers, brochures, merchandise, wall branding, fleet branding, and in-store assets.</li><li>Support major seasonal campaigns such as Ramadan, Eid, and other marketing activations through key visual development and toolkit creation.</li><li>Create product and in-app assets including banners, collection visuals, floating ads, OTP banners, and promotional creatives.</li><li>Collaborate closely with Marketing, CRM, Product, and Commercial teams to deliver impactful creative solutions.</li><li>Ensure all designs align with brand guidelines and business objectives.</li><li>Stay updated on industry trends, design best practices, and emerging creative technologies.</li></ul><p>Additional Preferred Responsibility</p><ul><li>Ability to code responsive HTML email templates and adapt email creatives for CRM campaigns.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Junior Level 1 3 years of graphic design experience.</li><li>Strong portfolio demonstrating digital and print design capabilities.</li><li>Senior Level 4 7+ years of graphic design experience.</li><li>Proven experience leading creative projects and campaign visual development.</li><li>Technical Skills Adobe Creative Suite (Photoshop, Illustrator, InDesign). Figma.</li><li>Understanding of digital advertising formats and platform requirements.</li><li>Knowledge of HTML email coding is highly preferred.</li><li>Basic understanding of UX/UI principles is a plus.</li><li>Competencies Strong visual storytelling skills. Creativity and attention to detail. Time management and ability to handle multiple projects simultaneously. Strong communication and collaboration skills. Ability to work in a fast-paced environment.</li></ul>

About Korra Energi Korra Energi is a leading Egyptian company with over 25 years of experience specializing in energy efficiency solutions and construction services. Our team of over 3,000 professionals has established us as market leaders across diverse sectors, including Sustainable Green Energy, Construction, Energy Systems – encompassing aftersales and facility management services – and Utilities. We are currently seeking a seasoned Construction Manager to join our leadership team and oversee the execution of large-scale power and infrastructure projects across the region. Guided by our ultimate goal of "إعمار الأرض" – fostering "Growth & Prosperity" – we are committed to delivering value, creating a positive impact, and building a better, greener future.<br>Key Responsibilities:Support the Project Manager in identifying and minimizing project risks and aligning plans with project milestones. Review constructability, approve shop drawings, and verify coordination with project timelines. Assist in value engineering reviews and support revised schedules and resource allocation strategies. Lead planning for execution sequences, resource deployment, and performance monitoring through weekly and daily work programs. Collaborate with Cost Control Engineers and Section Engineers to implement cost-saving strategies and monitor project budgets. Coordinate with the Cost Engineer to develop Work Breakdown Structures (WBS) and maintain detailed cost tracking. Promote a strong safety culture by monitoring site activities, attending safety meetings, and enforcing corrective actions. Identify and mentor high-potential site staff for career progression and skills development. Oversee all aspects of site setup, equipment needs, maintenance plans, and cost-effective demobilization. Develop trade-specific execution strategies, prioritize activities, and ensure compliance with project procurement agreements. Manage site supervision, resolve issues proactively, conduct coordination meetings, and avoid project claims. Maintain strong relationships with regulatory authorities, ensure all necessary permits are secured, and uphold compliance standards. Plan manpower allocations based on productivity analysis, optimize workforce performance, and support cost control initiatives. Participate in recruitment interviews and evaluate new candidates for project needs. Assist the PM in establishing project-specific roles, objectives, and KPIs for team members.<br>Qualifications:Bachelor's degree in Civil, Arch., Mechanical, or Electrical Engineering or a related discipline.10+ years of experience in construction management, preferably within EPC or large-scale infrastructure projects. Proven track record in planning, risk management, execution strategy, and project team leadership. Strong understanding of cost control, procurement procedures, and resource management. Excellent command of MS Office, project management software (Primavera P6/MS Project), and Auto CAD. Strong leadership, communication, and negotiation skills.<br>Why Join Korra Energi? At Korra Energi, you will discover a distinctive culture and value system that sets us apart. You will become part of a team at the forefront of construction and energy efficiency solutions. We offer a dynamic work environment, opportunities for professional growth, and exposure to cutting-edge equipment and methodologies. As a company with a long-term vision, guided by strong governance and a focus on operational excellence, we are collectively building a better future.

Responsibilities Oversee construction projects from construction to completion Cross functional coordination for logistics with vendors Ensure quality and compliance with regulatory bodies Reporting and tracking status reports<br>Qualifications Bachelor's degree or equivalent experience in Architecture/Civil Time management Decision making abilities Strong communication abilities Leadership experience

<p>Manage and supervise construction and finishing activities on-site. Coordinate with consultants, subcontractors, suppliers, and internal teams. Ensure project delivery according to quality standards, budget, and timelines. Monitor project progress and resolve site challenges proactively. Oversee finishing works and ensure compliance with project specifications. Lead site teams and maintain smooth project execution. Prepare and review project reports and schedules.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil or Architectural Engineering.</li><li>7+ years of experience in construction projects.</li><li>Strong background in Fit-out &amp; Interior Finishes.</li><li>Experience managing commercial or administrative projects.</li><li>Excellent leadership and site coordination skills.</li></ul>

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>BIM Engineer – Bridges & Tunnels <br><br>EGIS is seeking a highly skilled Structures BIM Engineer with a strong modelling more specifically parametric model to join our team in Cairo Egypt. In this role, you will be creating BIM models of complex projects i.e. bridges, tunnels, civil structures, viaducts and other linear & vertical structures. <br><br>Support the BIM Coordinator and Project Delivery Team(s) in day-to-day BIM implementation activities. <br><br><br>Develop 3D/2D dimensional models required for drawing preparation, clash reporting and presentation aligned with the project LOD requirements and modeling standards. <br><br><br>Extract 3D models for clash analysis, schedule review and QS. <br><br><br>Ensure coordination of all Model interfaces with designers and engineers of other disciplines. <br><br><br>Ensure all Models, drawings and deliverables are checked to comply with project and company quality standards and BIM requirements. <br><br><br>Prepare the engineering drawings from the model that comprises of basic arrangements, layouts, profiles, sections etc. <br><br><br>Develop and extract 2D geometry from the models for internal reviews and coordination meetings. <br><br><br>Ensure Project Information Models (PIM’s) are delivered in accordance with the agreed TIDP, MIDP and CDE protocol.  <br><br><br>Prepare BIM package submissions in accordance with project standards and requirements <br><br><br>Conduct clash detection and visual walkthroughs <br><br><br>Prepare models and reports for constructability analysis <br><br><br>Coordinate work with the lead technical engineer, including taking responsibility for timely completion of deliverables. <br><br><br><br><br>Qualifications<br><br>Bachelor’s Degree or Diploma in Engineering from an accredited institution. <br><br><br>Minimum 6-8 years of experience with 4-5 years Revit experience within depth working knowledge of current Revit versions; Proficient in CAD design 2D/3D (Auto CAD and Revit). <br><br><br>Able to demonstrate (skill assessment) ability to set up new Revit project files for the team; Demonstrate strong problem-solving skills and multitasking ability; Produce Revit Families according to project requirements. <br><br><br>Able to maintain standards and library of Revit families/objects; Able to run clash detection in Revit. <br><br><br>Strong computer skills; Experience of producing working drawings in Revit. <br><br><br>Expert knowledge of Revit including use of parametric, generation of Bill of Material, assemblies, sub-assemblies, creation of families, etc. <br><br><br>Advanced Revit skills are essential including creation of a federated model using Revit Links, creating/working with Revit Worksets and professional using of shared coordinates. <br><br><br>Proficient in a range of BIM Authoring, Scripting, Design Review, Coordination, Simulations and Collaboration Platforms: <br><br><br>Essentials-Non-negotiable: (Revit Structure, Dynamo, Rhino, Grasshopper, Navisworks, ACC, Revizto & Auto CAD). <br><br><br>Preferable: (Project Wise, Synchro, Bluebeam Studio, Autodesk Inventor professional, Sketchup, 3D Max).

???????? ????????'???????? ???????????????????????? " ???????????????????????????????????????? ???????????????????????????????? "<br>For a leading Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Maadi<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.<br>????To apply:Send your CV to s.hussein@tawzef.comkindly mention the job title in the subject line.

???????? ????????'???????? ???????????????????????? " ???????????????????????????????????????? ???????????????????????????????? "<br>For a leading Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Maadi<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.<br>????To apply:Send your CV to s.hussein@tawzef.comkindly mention the job title in the subject line.

About the Role:We are looking for an experienced BIM Coordinator to lead multidisciplinary BIM coordination activities and ensure effective collaboration between architectural, structural, MEP, civil, and other project disciplines. The successful candidate will coordinate BIM models between the Egypt engineering team and UAE project teams, identify and resolve coordination issues, and ensure compliance with project BIM standards and deliverables.<br>Key Responsibilities:Lead multidisciplinary BIM coordination across architectural, structural, MEP, civil, and other disciplines. Manage federated BIM models and conduct regular model coordination reviews. Perform clash detection and coordinate the resolution of technical and spatial conflicts. Review models for accuracy, completeness, and compliance with project requirements. Coordinate with UAE-based project managers, engineers, consultants, and site teams. Track clashes, RFIs, design changes, and coordination issues through to resolution. Ensure BIM deliverables comply with approved project standards, BEP, and client requirements. Support the development and implementation of BIM workflows, standards, and quality procedures. Conduct model audits and quality checks before submission. Maintain proper model version control and coordination records.<br>Requirements:Bachelor's degree or diploma in Architecture, Civil/Structural Engineering, MEP Engineering, or a related discipline.7–10 years of relevant BIM experience, preferably within construction, infrastructure, landscaping, or engineering consultancy. Strong experience in multidisciplinary BIM coordination. Hands-on experience with BIM coordination and clash detection. Ability to read and understand architectural, structural, MEP, and civil drawings. Experience coordinating with teams across different locations is preferred. Strong communication and problem-solving skills.<br>Technical Skills:Essential:Revit Navisworks BIM Coordination Clash Detection Model Federation BIM QA/QCAuto CADAdvantageous:Autodesk Construction Cloud (ACC) BIM 360Civil 3DSolibri Dynamo BIM 360/ACC issue management

???????? ????????'???????? ???????????????????????? " ???????????????????????????????????????? ???????????????????????????????? "<br>For a leading Saudi real estate development company, headquartered in Riyadh since 2006, is expanding its operations and launching a new Back Office in Egypt. This is an exciting opportunity to join a growing organization with a strong portfolio of residential, commercial, mixed-use developments across Saudi Arabia. Be part of the team from the beginning, contribute to high impact projects and take your career to the next level.<br>????Location: Maadi<br>Job Description:* Prepare and review mechanical shop drawings for HVAC, plumbing, firefighting, and drainage systems.* Coordinate drawings with architectural, structural, and electrical disciplines.* Review technical documents and prepare RFIs and material submittals.* Update drawings based on consultant comments and support site teams.* Ensure compliance with project specifications and GCC standards.<br>Requirements:* Bachelor’s degree in Mechanical Engineering.* 3–5 years of experience in mechanical shop drawings.* Contracting background and GCC project experience are required.* Proficiency in Auto CAD; Revit MEP is preferred.* Good command of English.

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organization of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis’ long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>EGIS is currently looking for a highly skilled BIM Designer Wet Utilities to help us deliver multi-disciplinary projects. The role is expected to lead the BIM modelling for wet utilities discipline as well help with setup, training and development of automation around Autodesk Revit, ACC and Navisworks with the project BIM manager. <br><br>Responsibilities<br><br>Support the BIM Coordinator and Project Delivery Team(s) in day-to-day BIM implementation activities. Develop 3D/2D dimensional models required for drawing preparation, clash reporting and presentation aligned with the project LOD requirements and modelling standards. Extract 3D models for clash analysis, schedule review and QS. Ensure coordination of all Model interfaces with designers and engineers of other disciplines. Ensure all Models, drawings and deliverables are checked to comply with project and company quality standards and BIM requirements. Prepare the engineering drawings from the model that comprises of basic arrangements, layouts, profiles, sections etc. Develop and extract 2D geometry from the models for internal reviews and coordination meetings. Ensure Project Information Models (PIM’s) are delivered in accordance with the agreed TIDP, MIDP and CDE protocol. Prepare BIM package submissions in accordance with project standards and requirements Conduct clash detection and visual walkthroughs Prepare models and reports for constructability analysis Coordinate work with the lead technical engineer, including taking responsibility for timely completion of deliverables. Automate modelling process, model data management and reporting for BIM delivery<br><br><br>Qualifications<br><br>Bachelor’s Degree or 3 Years Diploma in Engineering from an accredited University. Minimum 5+ years Civil 3D experience within depth working knowledge of current versions Civil 3D;Proficient in CAD design 2D/3D (Auto CAD and Civil 3D). Able to demonstrate (skill assessment) ability to set up new Civil 3D project files for the team; Demonstrate strong problem-solving skills and multitasking ability; Produce Civil 3D content according to project requirements. Expert knowledge of Civil 3D including use of sub-assemblies composer, generation of Bill of Material, assemblies, sub-assemblies, creation of pipe networks, alignment, corridor etc. Proficient in a range of BIM Authoring, Scripting, Design Review, Coordination, Simulations and Collaboration Platforms:Essentials: (Civil 3D, Navisworks, Revizto, ACC, Auto CAD). Knowledge of BIM codes and Standards (ISO19650, PAS1192-2, BS1192). Knowledge of General BIM Model requirements (i.e., LOD, Naming convention, parametric modeling, etc.)<br>Mandatory Skills required:<br><br>Civil 3D Modeling and 3D Model-Based workflows. Advance skills in Civil 3D is a must for this role. Civil 3D Catalogs & Sub-assembly composer Modeling Standards Naming convention Extracting cut sheets Modeling templates British Standards BS/PAS Series (1192) International Organization for Standardization (19650) Common Data Environment Project Information Model Delivery and Digital Delivery methods Quality Assurance Compliance and Validation Collaboration, Coordination and Clash/Clearance Detection Quantity Take Off / Scheduling Asset Information Model Delivery, COBie, O&M and Asset Tagging