Job Summary:
You will be responsible for the BIM modelling, shop drawings, and electrical design of construction projects. You will deliver coordinated, clash-free electrical models and accurate, approval-ready drawings that comply with project specifications and applicable codes, working closely with MEP, architectural, structural, and site teams to ensure the electrical design is implemented as intended.
Key Duties & Responsibilities:
1- Develop and maintain LOD 300-400 electrical models in Revit (power, lighting, low current, containment, earthing, lightning protection).
2- Run clash detection and coordination in Navisworks and resolve clashes with the MEP and architectural/structural teams.
3- Automate repetitive modelling, tagging, and scheduling tasks with Dynamo scripts.
4- Model external electrical infrastructure in Civil 3D and coordinate it with wet utilities, including street lighting, MV/LV underground cable, Duct banks, manholes, and pull pits, aligned with grading, roads, and utility corridors
5- Prepare and issue electrical shop drawings, coordination drawings, and as-built drawings from the model, using REVIT And Auto Cad.
6-Detail containment routes, panel and equipment layouts, cable tray sections, and installation details.
7-Make sure drawings follow approved design intent, specifications, and site conditions.
8-Handle revisions, markups, and consultant comments, and keep the drawing register up to date.
9- Perform load calculations, cable sizing, voltage drop, and protection coordination.
10- Runs short-circuit, load flow, and coordination studies in ETAP.
11- Carry out lighting design and calculations in DIALux evo (lux levels, uniformity, energy compliance).
12- Design and verify single-line diagrams, panel schedules, and distribution layouts
Requirements:
- BSc in Electrical Engineering from a reputable university
- BIM Diploma (Mandatory)
- 7-9 years of experience in an Electrical Technical office or Design role
- Proficiency in Revit, Navisworks, AutoCAD, Dynamo, DIALux evo and ETAP
- Strong knowledge of electrical codes and standards
- Strong coordination and problem-solving skills
Technical Requirements:
- Autodesk Revit: Advanced electrical modelling at LOD 300-400, families, and sheet setup
- Autodesk Navisworks: Clash detection, model coordination, and clash reports
- AutoCAD: Shop drawings, details, and 2D coordination
- Dynamo: Automation scripts for modelling, tagging, and scheduling in Revit
- DIALux evo: Lighting design and calculations (lux levels, uniformity)
- ETAP: Short-circuit, load flow, and protection coordination studies
- Civil 3D (Infrastructure Projects): Coordinating electrical infrastructure with grading, roads, and utility corridors, including street lighting, MV/LV underground cable routes, duct banks, manholes, and pull pits.
- Microsoft Office (Excel, Word): Load calculations, BOQ, schedules, and submittals.
ملخص الوظيفة:
ستكون مسؤولاً عن نمذجة معلومات البناء (BIM)، والرسومات التنفيذية، والتصميم الكهربائي لمشاريع الإنشاءات. ستقوم بتقديم نماذج كهربائية منسقة وخالية من التعارضات، ورسومات دقيقة جاهزة للاعتماد تتوافق مع مواصفات المشروع والأكواد المعمول بها، وذلك بالعمل بشكل وثيق مع فرق الهندسة الميكانيكية والكهربائية والسباكة (MEP)، والمعماريين، والإنشائيين، وفرق الموقع لضمان تنفيذ التصميم الكهربائي كما هو مخطط له.
المهام والمسؤوليات الرئيسية:
- نمذجة معلومات البناء (BIM):
1- تطوير وصيانة النماذج الكهربائية بمستوى تفصيل (LOD 300-400) باستخدام برنامج Revit (أنظمة الطاقة، الإضاءة، التيار الخفيف، أنظمة التمديدات، التأريض، والحماية من الصواعق).
2- إجراء كشف التعارضات والتنسيق في برنامج Navisworks وحل التعارضات مع فرق MEP والمعماريين/الإنشائيين.
3- أتمتة مهام النمذجة والتسمية (tagging) وجدولة الكميات المتكررة باستخدام سكربتات Dynamo.
4- نمذجة البنية التحتية الكهربائية الخارجية في برنامج Civil 3D وتنسيقها مع المرافق العامة، بما في ذلك إنارة الشوارع، والكابلات الأرضية للجهد المتوسط/المنخفض (MV/LV)، ومسارات القنوات (Duct banks)، وغرف التفتيش، وحفر السحب، بما يتماشى مع المناسيب، والطرق، وممرات المرافق.
- الرسومات التنفيذية (Shop Drawings):
5- إعداد وإصدار الرسومات التنفيذية الكهربائية، ورسومات التنسيق، والرسومات التنفيذية حسب ما تم تنفيذه (As-built) من النموذج، باستخدام برنامجي REVIT وAutoCAD.
6- تفصيل مسارات التمديدات، ومخططات اللوحات والمعدات، وقطاعات صواني الكابلات، وتفاصيل التركيب.
7- التأكد من مطابقة الرسومات لنوايا التصميم المعتمدة، والمواصفات، وظروف الموقع.
8- التعامل مع التعديلات، والملاحظات، وتعليقات الاستشاري، والحفاظ على تحديث سجل الرسومات.
9- إجراء حسابات الأحمال، وتحديد أحجام الكابلات، وهبوط الجهد، وتنسيق أجهزة الحماية.
10- إجراء دراسات القصر الكهربائي (Short-circuit)، وتدفق الأحمال، ودراسات التنسيق في برنامج ETAP.
11- تنفيذ تصميم وحسابات الإضاءة في برنامج DIALux evo (مستويات اللوكس، التوحيد، الامتثال للطاقة).
12- تصميم والتحقق من المخططات الخطية المفردة (Single-line diagrams)، وجداول اللوحات، ومخططات التوزيع.
المتطلبات:
- درجة البكالوريوس في الهندسة الكهربائية من جامعة مرموقة
- دبلوم في نمذجة معلومات البناء (BIM) (إلزامي)
- 7-9 سنوات من الخبرة في المكتب الفني الكهربائي أو دور التصميم
- إتقان برامج Revit، Navisworks، AutoCAD، Dynamo، DIALux evo، وETAP
- معرفة قوية بالأكواد والمعايير الكهربائية
- مهارات قوية في التنسيق وحل المشكلات
المتطلبات التقنية:
- Autodesk Revit: نمذجة كهربائية متقدمة بمستوى (LOD 300-400)، وإنشاء العائلات (Families)، وإعداد اللوحات.
- Autodesk Navisworks: كشف التعارضات، تنسيق النماذج، وتقارير التعارضات.
- AutoCAD: الرسومات التنفيذية، التفاصيل، والتنسيق ثنائي الأبعاد.
- Dynamo: سكربتات الأتمتة للنمذجة، والتسمية (tagging)، والجدولة في Revit.
- DIALux evo: تصميم وحسابات الإضاءة (مستويات اللوكس، التوحيد).
- ETAP: دراسات القصر الكهربائي، وتدفق الأحمال، وتنسيق الحماية.
- Civil 3D (مشاريع البنية التحتية): تنسيق البنية التحتية الكهربائية مع المناسيب، والطرق، وممرات المرافق، بما في ذلك إنارة الشوارع، ومسارات كابلات الجهد المتوسط/المنخفض، ومسارات القنوات، وغرف التفتيش، وحفر السحب.
- Microsoft Office (Excel, Word): حسابات الأحمال، وجداول الكميات (BOQ)، والجداول الزمنية، والمستندات الفنية.