Job Purpose
The Quality Control Engineer is responsible for ensuring that all materials, equipment, installation works, inspections, testing, and commissioning activities related to fire protection systems comply with approved project specifications, drawings, applicable codes and standards, and the company’s quality management procedures.
The role involves inspecting incoming materials, monitoring site installation activities, coordinating inspections with clients and consultants, preparing quality documentation, managing non-conformities, and ensuring that all required quality records are completed before project handover.
Key Responsibilities
A. Quality Control and Inspection
Implement and monitor the project Quality Control Plan (QCP), Inspection and Test Plans (ITPs), and approved quality procedures.
Inspect incoming materials and equipment to verify compliance with approved material submittals, technical specifications, purchase orders, and applicable standards.
Perform site inspections of fire protection system installations, including sprinkler systems, fire pumps, fire hydrants, standpipes, hose reels, valves, piping networks, and associated equipment.
Verify that installation works comply with approved shop drawings, coordinated drawings, method statements, project specifications, and manufacturer recommendations.
Inspect piping supports, hangers, fittings, valves, equipment foundations, and installation arrangements in accordance with approved drawings and project requirements.
Ensure that the correct materials and approved equipment are installed in the designated locations.
Verify identification, traceability, storage, handling, and protection of materials and equipment at the project site.
Identify workmanship defects, installation deviations, and quality issues, and coordinate corrective actions with the construction team.
Ensure inspections are completed before works are concealed or progress to subsequent construction stages, where applicable.
B. Inspection Requests and Quality Documentation
Prepare, review, and submit inspection requests (IRs/WIRs) and material inspection requests (MIRs) to clients and consultants.
Coordinate with client representatives, consultants, and third-party inspectors for scheduled inspections and approvals.
Prepare and maintain inspection checklists, material receiving reports, testing records, and quality control documentation.
Verify that approved drawings, specifications, material approvals, and inspection procedures are available at the work location.
Maintain updated inspection registers, material inspection records, test reports, and quality documentation.
Follow up on inspection comments and ensure that rejected or conditionally approved works are corrected and resubmitted for inspection.
Ensure that all quality documents are properly recorded, traceable, and maintained in accordance with project requirements.
C. Testing and Commissioning Quality Control
Coordinate and witness testing and commissioning activities in accordance with approved procedures, ITPs, project specifications, and applicable codes.
Inspect and verify readiness for hydrostatic pressure testing of fire protection piping systems.
Monitor flushing, flow testing, fire pump performance testing, and other applicable acceptance tests.
Verify that testing equipment and measuring instruments are suitable for the required tests and have valid calibration records where applicable.
Ensure that test pressures, durations, acceptance criteria, and recorded results comply with approved procedures and project requirements.
Prepare and maintain pressure test reports, flushing reports, pump test records, inspection reports, and commissioning documentation.
Coordinate with commissioning engineers and site teams to ensure that identified deficiencies are rectified and successful retesting is completed.
Verify that system testing and commissioning records are complete before final acceptance and handover.
D. Non-Conformance Management
Identify non-conforming materials, defective workmanship, and deviations from approved drawings or specifications.
Raise or coordinate Non-Conformance Reports (NCRs) in accordance with the project quality management procedure.
Investigate quality issues with relevant site personnel and support root-cause analysis.
Coordinate corrective and preventive actions with construction, engineering, procurement, and subcontractor teams.
Monitor the implementation and effectiveness of corrective actions.
Follow up on NCR closure and maintain an updated register of non-conformities and quality observations.
Ensure that rejected materials and non-compliant installations are appropriately identified, controlled, and prevented from unintended use or acceptance.
E. Compliance with Standards and Specifications
Ensure compliance with approved project specifications, contract requirements, and applicable fire protection codes and standards.
Maintain working knowledge of relevant NFPA standards, such as NFPA 13 for sprinkler systems, NFPA 14 for standpipe and hose systems, NFPA 20 for stationary fire pumps, and other standards applicable to the project scope.
Follow applicable ISO 9001 quality management principles and company quality procedures.
Verify that materials and equipment have the required approvals, certificates, and supporting technical documentation.
Coordinate with engineering teams to clarify technical discrepancies and resolve quality-related issues before proceeding with affected works.
Ensure that inspection and testing activities comply with client requirements and approved inspection and test plans.
F. Coordination and Quality Improvement
Coordinate with site engineers, construction supervisors, procurement personnel, commissioning engineers, and subcontractors to resolve quality issues.
Participate in internal quality audits, consultant inspections, client audits, and project quality meetings.
Monitor recurring defects and recommend improvements to installation methods and inspection procedures.
Communicate quality requirements to site teams and support awareness of approved installation and inspection procedures.
Assist in evaluating subcontractor workmanship and material compliance.
Follow up on client comments, audit findings, and quality improvement actions until closure.
G. Project Handover and Final Documentation
Compile and verify quality documentation required for project completion and handover.
Ensure availability of approved material submittals, inspection requests, material inspection records, pressure test reports, flushing reports, pump test reports, and commissioning records, as applicable.
Coordinate with the engineering team to verify the availability and accuracy of as-built drawings.
Support preparation of operation and maintenance manuals, warranties, certificates, and other required handover documents.
Maintain an updated register of outstanding inspections, NCRs, punch-list items, and pending quality deliverables.
Ensure that all quality-related comments and outstanding deficiencies are resolved before final acceptance.
Requirements
Qualifications and Experience
Bachelor's degree in Mechanical Engineering or a related engineering discipline.
3–5 years of relevant experience in QA/QC for fire protection systems, MEP contracting, or building services projects.
Practical experience in inspection and quality control of fire protection system installation, testing, and commissioning.
Good understanding of fire protection piping systems, valves, sprinkler systems, fire pumps, hydrants, standpipes, and related equipment.
Knowledge of approved material submittals, technical specifications, shop drawings, inspection requests, and inspection and test plans.
Familiarity with relevant NFPA standards and applicable local codes and project specifications.
Knowledge of ISO 9001 quality management systems and non-conformance management.
Experience preparing quality inspection reports, test reports, checklists, and handover documentation.
Familiarity with AutoCAD, Microsoft Office, and electronic document control systems is an advantage.
Required Technical Skills
Inspection of fire protection materials, equipment, and installation works.
Preparation and implementation of ITPs, quality checklists, and inspection requests.
Interpretation of technical drawings, BOQs, specifications, and approved material submittals.
Knowledge of hydrostatic pressure testing, flushing, fire pump testing, and commissioning documentation.
Non-conformance identification, reporting, corrective action follow-up, and closure.
Material traceability and quality record management.
Proficiency in Microsoft Excel, Word, and other quality documentation tools.
Ability to coordinate inspections with clients, consultants, and third-party inspectors.
5. Expected Deliverables
The Quality Control Engineer is expected to prepare, maintain, or coordinate the following documents:
Project Quality Control Plan and applicable ITPs.
Material Inspection Requests (MIRs) and Work Inspection Requests (WIRs/IRs).
Material receiving and inspection reports.
Installation inspection checklists.
Hydrostatic pressure test reports.
Flushing and fire pump performance test records.
Calibration certificates and testing equipment records, where applicable.
NCRs, quality observation registers, and corrective action records.
Inspection registers and quality progress reports.
Commissioning quality records and final handover documentation.
الغرض من الوظيفة
يتولى مهندس مراقبة الجودة مسؤولية ضمان امتثال جميع المواد، والمعدات، وأعمال التركيب، وعمليات الفحص، والاختبار، وأنشطة التشغيل المتعلقة بأنظمة الحماية من الحريق للمواصفات المعتمدة للمشروع، والمخططات، والأكواد والمعايير المعمول بها، وإجراءات إدارة الجودة الخاصة بالشركة.
يتضمن الدور فحص المواد الواردة، ومراقبة أنشطة التركيب في الموقع، وتنسيق عمليات الفحص مع العملاء والاستشاريين، وإعداد وثائق الجودة، وإدارة حالات عدم المطابقة، وضمان اكتمال جميع سجلات الجودة المطلوبة قبل تسليم المشروع.
المسؤوليات الرئيسية
أ. مراقبة الجودة والفحص
تنفيذ ومراقبة خطة مراقبة الجودة للمشروع (QCP)، وخطط الفحص والاختبار (ITPs)، وإجراءات الجودة المعتمدة.
فحص المواد والمعدات الواردة للتحقق من امتثالها لاعتمادات المواد المعتمدة، والمواصفات الفنية، وأوامر الشراء، والمعايير المعمول بها.
إجراء عمليات فحص الموقع لتركيبات أنظمة الحماية من الحريق، بما في ذلك أنظمة الرشاشات، ومضخات الحريق، وصنابير الحريق، وأنابيب الإطفاء الصاعدة، وبكرات الخراطيم، والصمامات، وشبكات الأنابيب، والمعدات المرتبطة بها.
التحقق من امتثال أعمال التركيب للمخططات التنفيذية المعتمدة، والمخططات المنسقة، وبيانات الطريقة، ومواصفات المشروع، وتوصيات الشركة المصنعة.
فحص دعامات الأنابيب، والتعليقات، والوصلات، والصمامات، وقواعد المعدات، وترتيبات التركيب وفقاً للمخططات المعتمدة ومتطلبات المشروع.
ضمان تركيب المواد الصحيحة والمعدات المعتمدة في المواقع المحددة لها.
التحقق من تحديد وتتبع وتخزين ومناولة وحماية المواد والمعدات في موقع المشروع.
تحديد عيوب التنفيذ، وانحرافات التركيب، ومشكلات الجودة، وتنسيق الإجراءات التصحيحية مع فريق الإنشاءات.
ضمان اكتمال عمليات الفحص قبل تغطية الأعمال أو الانتقال إلى مراحل البناء اللاحقة، حيثما ينطبق ذلك.
ب. طلبات الفحص ووثائق الجودة
إعداد ومراجعة وتقديم طلبات الفحص (IRs/WIRs) وطلبات فحص المواد (MIRs) إلى العملاء والاستشاريين.
التنسيق مع ممثلي العملاء والاستشاريين والمفتشين من طرف ثالث لإجراء عمليات الفحص والاعتمادات المجدولة.
إعداد وصيانة قوائم التحقق من الفحص، وتقارير استلام المواد، وسجلات الاختبار، ووثائق مراقبة الجودة.
التحقق من توفر المخططات المعتمدة، والمواصفات، واعتمادات المواد، وإجراءات الفحص في موقع العمل.
الحفاظ على سجلات الفحص المحدثة، وسجلات فحص المواد، وتقارير الاختبار، ووثائق الجودة.
متابعة ملاحظات الفحص والتأكد من تصحيح الأعمال المرفوضة أو المعتمدة مشروطاً وإعادة تقديمها للفحص.
ضمان تسجيل جميع وثائق الجودة بشكل صحيح، وإمكانية تتبعها، والاحتفاظ بها وفقاً لمتطلبات المشروع.
ج. مراقبة جودة الاختبار والتشغيل
تنسيق وحضور أنشطة الاختبار والتشغيل وفقاً للإجراءات المعتمدة، وخطط الفحص والاختبار (ITPs)، ومواصفات المشروع، والأكواد المعمول بها.
فحص والتحقق من الجاهزية لاختبار الضغط الهيدروستاتيكي لأنظمة أنابيب الحماية من الحريق.
مراقبة عمليات الغسيل، واختبار التدفق، واختبار أداء مضخة الحريق، وغيرها من اختبارات القبول المعمول بها.
التحقق من ملاءمة معدات الاختبار وأدوات القياس للاختبارات المطلوبة وامتلاكها لسجلات معايرة سارية حيثما ينطبق ذلك.
ضمان امتثال ضغوط الاختبار، ومددها، ومعايير القبول، والنتائج المسجلة للإجراءات المعتمدة ومتطلبات المشروع.
إعداد وصيانة تقارير اختبار الضغط، وتقارير الغسيل، وسجلات اختبار المضخة، وتقارير الفحص، ووثائق التشغيل.
التنسيق مع مهندسي التشغيل وفرق الموقع لضمان تصحيح أوجه القصور المحددة وإتمام إعادة الاختبار بنجاح.
التحقق من اكتمال سجلات اختبار وتشغيل النظام قبل القبول النهائي والتسليم.
د. إدارة عدم المطابقة
تحديد المواد غير المطابقة، وعيوب التنفيذ، والانحرافات عن المخططات أو المواصفات المعتمدة.
رفع أو تنسيق تقارير عدم المطابقة (NCRs) وفقاً لإجراءات إدارة الجودة في المشروع.
التحقيق في مشكلات الجودة مع موظفي الموقع المعنيين ودعم تحليل الأسباب الجذرية.
تنسيق الإجراءات التصحيحية والوقائية مع فرق الإنشاءات، والهندسة، والمشتريات، والمقاولين من الباطن.
مراقبة تنفيذ وفعالية الإجراءات التصحيحية.
متابعة إغلاق تقارير عدم المطابقة (NCRs) والحفاظ على سجل محدث لحالات عدم المطابقة وملاحظات الجودة.
ضمان تحديد المواد المرفوضة والتركيبات غير المطابقة والتحكم فيها ومنع استخدامها أو قبولها عن غير قصد.
هـ. الامتثال للمعايير والمواصفات
ضمان الامتثال لمواصفات المشروع المعتمدة، ومتطلبات العقد، وأكواد ومعايير الحماية من الحريق المعمول بها.
الحفاظ على معرفة عملية بمعايير الجمعية الوطنية للحماية من الحرائق (NFPA) ذات الصلة، مثل NFPA 13 لأنظمة الرشاشات، وNFPA 14 لأنظمة الأنابيب الصاعدة والخراطيم، وNFPA 20 لمضخات الحريق الثابتة، وغيرها من المعايير المعمول بها لنطاق المشروع.
اتباع مبادئ إدارة الجودة ISO 9001 المعمول بها وإجراءات الجودة الخاصة بالشركة.
التحقق من حصول المواد والمعدات على الاعتمادات والشهادات المطلوبة والوثائق الفنية الداعمة.
التنسيق مع الفرق الهندسية لتوضيح التباينات الفنية وحل المشكلات المتعلقة بالجودة قبل المضي قدماً في الأعمال المتأثرة.
ضمان امتثال أنشطة الفحص والاختبار لمتطلبات العميل وخطط الفحص والاختبار المعتمدة.
و. التنسيق وتحسين الجودة
التنسيق مع مهندسي الموقع، ومشرفي الإنشاءات، وموظفي المشتريات، ومهندسي التشغيل، والمقاولين من الباطن لحل مشكلات الجودة.
المشاركة في تدقيق الجودة الداخلي، وفحوصات الاستشاري، وتدقيقات العميل، واجتماعات جودة المشروع.
مراقبة العيوب المتكررة والتوصية بتحسينات في طرق التركيب وإجراءات الفحص.
إبلاغ متطلبات الجودة لفرق الموقع ودعم الوعي بإجراءات التركيب والفحص المعتمدة.
المساعدة في تقييم جودة عمل المقاولين من الباطن وامتثال المواد.
متابعة ملاحظات العميل، ونتائج التدقيق، وإجراءات تحسين الجودة حتى الإغلاق.
ز. تسليم المشروع والوثائق النهائية
تجميع والتحقق من وثائق الجودة المطلوبة لإنجاز المشروع وتسليمه.
ضمان توفر اعتمادات المواد المعتمدة، وطلبات الفحص، وسجلات فحص المواد، وتقارير اختبار الضغط، وتقارير الغسيل، وتقارير اختبار المضخة، وسجلات التشغيل، حسب الاقتضاء.
التنسيق مع الفريق الهندسي للتحقق من توفر ودقة المخططات المنفذة (As-built drawings).
دعم إعداد أدلة التشغيل والصيانة، والضمانات، والشهادات، وغيرها من وثائق التسليم المطلوبة.
الحفاظ على سجل محدث للفحوصات المعلقة، وتقارير عدم المطابقة (NCRs)، وبنود قائمة الملاحظات (Punch-list)، ومخرجات الجودة المعلقة.
ضمان حل جميع الملاحظات المتعلقة بالجودة وأوجه القصور العالقة قبل القبول النهائي.
المتطلبات
المؤهلات والخبرة
درجة البكالوريوس في الهندسة الميكانيكية أو تخصص هندسي ذي صلة.
3–5 سنوات من الخبرة ذات الصلة في ضمان الجودة/مراقبة الجودة (QA/QC) لأنظمة الحماية من الحريق، أو عقود الكهروميكانيكا (MEP)، أو مشاريع خدمات المباني.
خبرة عملية في فحص ومراقبة جودة تركيب واختبار وتشغيل أنظمة الحماية من الحريق.
فهم جيد لأنظمة أنابيب الحماية من الحريق، والصمامات، وأنظمة الرشاشات، ومضخات الحريق، وصنابير الحريق، والأنابيب الصاعدة، والمعدات ذات الصلة.
معرفة باعتمادات المواد المعتمدة، والمواصفات الفنية، والمخططات التنفيذية، وطلبات الفحص، وخطط الفحص والاختبار.
الإلمام بمعايير NFPA ذات الصلة والأكواد المحلية المعمول بها ومواصفات المشروع.
معرفة بأنظمة إدارة الجودة ISO 9001 وإدارة عدم المطابقة.
خبرة في إعداد تقارير فحص الجودة، وتقارير الاختبار، وقوائم التحقق، ووثائق التسليم.
تعتبر المعرفة ببرنامج AutoCAD، وMicrosoft Office، وأنظمة التحكم في الوثائق الإلكترونية ميزة إضافية.
المهارات الفنية المطلوبة
فحص مواد الحماية من الحريق، والمعدات، وأعمال التركيب.
إعداد وتنفيذ خطط الفحص والاختبار (ITPs)، وقوائم التحقق من الجودة، وطلبات الفحص.
تفسير المخططات الفنية، وجداول الكميات (BOQs)، والمواصفات، واعتمادات المواد المعتمدة.
معرفة اختبار الضغط الهيدروستاتيكي، والغسيل، واختبار مضخة الحريق، ووثائق التشغيل.
تحديد عدم المطابقة، وإعداد التقارير، ومتابعة الإجراءات التصحيحية، والإغلاق.
تتبع المواد وإدارة سجلات الجودة.
إتقان برامج Microsoft Excel، وWord، وغيرها من أدوات توثيق الجودة.
القدرة على تنسيق الفحوصات مع العملاء والاستشاريين والمفتشين من طرف ثالث.
5. المخرجات المتوقعة
من المتوقع أن يقوم مهندس مراقبة الجودة بإعداد أو صيانة أو تنسيق الوثائق التالية:
خطة مراقبة جودة المشروع وخطط الفحص والاختبار (ITPs) المعمول بها.
طلبات فحص المواد (MIRs) وطلبات فحص الأعمال (WIRs/IRs).
تقارير استلام وفحص المواد.
قوائم التحقق من فحص التركيب.
تقارير اختبار الضغط الهيدروستاتيكي.
سجلات الغسيل واختبار أداء مضخة الحريق.
شهادات المعايرة وسجلات معدات الاختبار، حيثما ينطبق ذلك.
تقارير عدم المطابقة (NCRs)، وسجلات ملاحظات الجودة، وسجلات الإجراءات التصحيحية.
سجلات الفحص وتقارير تقدم الجودة.
سجلات جودة التشغيل ووثائق التسليم النهائية.